Photoelectric Sensors W100, Photoelectric Retro-Reflective Sensor, Standard Optics
Photoelectric Sensors W100, Photoelectric Retro-Reflective Sensor, Standard Optics
Photoelectric Sensors W100, Photoelectric Retro-Reflective Sensor, Standard Optics
www.mysick.com
Photoelectric sensors
W100, Photoelectric retro-reflective sensor,
Standard optics
WL100-P1439
Photoelectric sensors
W100, Photoelectric retro-reflective sensor, Standard optics
At a glance
• Standard miniature housing with M3 threaded mounting holes
• Optics with standard red LED or bright light LED
• Polarizing filter
• Light/dark switching and sensitivity adjustment via rotary switch possible
• All necessary accessories (BEF-W100-A and P250) are included with delivery
(depending on type)
Your benefits
• Highly visible light spot simplifies alignment
Illustration may differ
• Less contamination due to high optical operating reserve
• Polarization filter allows reliable detection of objects with shiny surfaces and
prevents false switching
• M3 threaded mounting holes provide easy installation
• Variants available for reliably detecting clear materials, min. attenuation 20 %
• All necessary accessories (bracket and reflector) are included with delivery,
reducing installation and procurement costs (depending on type)
Features
Sensor/detection principle: Photoelectric retro-reflective sensor, Standard optics
Dimensions (W x H x D): 11 mm x 31 mm x 20 mm
Housing design (light emission): Rectangular, Slim
1)
Sensing range max.: 0.01 m ... 6 m
2)
Sensing range: 0.01 m ... 5 m
Type of light: Visible red light
3)
Light source: LED
Wave length: 680 nm
Light spot diameter (distance): Ø 250 mm (3.5 m)
Sensitivity adjustment: Potentiometer, 270°
Focus adjustable: -
Mechanics/electronics
1)
Supply voltage: 10 V DC ... 30 V DC
2)
Ripple: ± 10 %
3)
Power consumption: ≤ 30 mA
Switching output: PNP, Light/dark-switching, manually selectable, open collector
Signal voltage PNP HIGH ∕ LOW: UV - 1,8 V ∕ ca. 0 V
Output current Imax.: 100
4)
Response time: ≤ 0.5 ms
5)
Switching frequency: 1,000
Angle of dispersion: Ca. 4 °
6)
Connection type: Cable, 3-wire, 2 m
Cable material: PVC
Conductor cross-section: 0.18 mm²
7) 8) 9)
Circuit protection::: A, B, D
Weight: 53 g
Polarisation filter: ü
Housing material: ABS/PC/POM
Optics material: PMMA
Enclosure rating: IP 65
Items supplied: Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector
P250
Ambient operating temperature: -25 °C ... 55 °C
Ambient storage temperature: -40 °C ... 70 °C
1) 2) 3) 4) 5)
Limit values, operation in short-circuit protected network max. 8 A May not exceed or fall short of V Without load Signal transit time with resistive load
S
6) 7) 8) 9)
With light/dark ratio 1:1 Do not bend below 0 °C A = V connections reverse-polarity protected B = inputs and output reverse-polarity protected D = outputs
S
overcurrent and short-circuit protected
Adjustments possible
Characteristic curve
Connection type