Detail - C1 1: Typical Door Details in Specialist Areas
Detail - C1 1: Typical Door Details in Specialist Areas
Detail - C1 1: Typical Door Details in Specialist Areas
NOTE:
1. DIMENSION ARE IN MILLIMETERS UNLESS OTHERWISE
INDICATED. DIMENSIONS INDICATED IN THE DRAWING ARE
A APPROXIMATE. ACTUAL SIZES COULD VARY AT THE SITE. IT IS A
CONTRACTOR'S RESPONSIBILITY TO CHECK THE ACTUAL
SIZES AND DO THE MINOR CHANGES ACCORDINGLY.FOR
DETAILS OF IRON MONGERY, REFER SCHEDULE OF DOOR
HARDWARE SETS AND MASTER SCHEDULE OF DOOR
CEILING BOTTOM LEVEL HARDWARE, FITTINGS AND ACCESSORIES.
3000-FROM FINISH FLOOR LEVEL
2. DOOR HEIGHT AND WIDTH TO BE VARIED AS PER THE DESIGN
(REFER DOOR SCHEDULE)
50
B B
125
C 25 C
15
40
70
ENGINEERED WOOD TOP FRAME 10
32
BLOCK 5C
BLOCK 5B
ZONE 9B
ZONE 3C ZONE 3D ZONE 7C ZONE 7D
E ZONE 9A
E
ZONE 3B ZONE 3A ZONE 7B ZONE 7A
10
TEAK LIPPING
KEY PLAN
10
FFL
F F
Rev. Date Desd. Description Drwn. Chk'd App'd
This drawing was prepared by CECB based on Architectural design drawings prepared by M/s Muditha Jayakody Associates Pvt.
Ltd, who was the Main Consultant/Architectural Consultant for Defence Headquarters Complex Project, Akuregoda till 30.09.2016.
Construction by
CONSTRUCTION MANAGEMENT UNIT OF THE ARMED FORCES
Drawing Title
MAIN BUILDING
BLOCK 02
TYPICAL DOOR DETAILS IN
SPECIALIST AREAS SHEET 01 OF 06
Designed Recommended
YGAD ...............................................
CONSULTANT ARCHITECT / SENIOR ARCHITECT
Drawn WMN
H Approved H
........................................
Checked TOT DGM (Architectural)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 23 December 2020