0% found this document useful (0 votes)
545 views5 pages

Two - Phase Line Sizing Gelam

The document summarizes the sizing of two-phase gas/liquid lines for a gelam production facility project. It provides specifications for three lines including temperature, pressure, flow rates, material properties, and proposed pipe sizes based on references to industry standards. The selected pipe sizes range from 2 to 6 inches to safely transport the gas-liquid streams.

Uploaded by

Elias Elias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
545 views5 pages

Two - Phase Line Sizing Gelam

The document summarizes the sizing of two-phase gas/liquid lines for a gelam production facility project. It provides specifications for three lines including temperature, pressure, flow rates, material properties, and proposed pipe sizes based on references to industry standards. The selected pipe sizes range from 2 to 6 inches to safely transport the gas-liquid streams.

Uploaded by

Elias Elias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 5

CLIENT : PT INSANI MITRASANI GELAM

PROJECT : Gelam Production Facility Project


SUBJECT : TWO PHASE LINE SIZING
REF. : API 14E, GPSA Sec. 17

REV A GELAM PRODUCTION PROJECT


TWO PHASE GAS/LIQUID LINE SIZING PT INSANI MITRASANI GELAM DATE 3/4/2021
API RP 14E, GPSA sec. 17 PREP'D CHK'D APP'D Sheet
PT. JAYA WIJAYA RAYA REF
RN 1 of 1
Service Line Temp. Pressure Vapor Rate Water Rate Oil Rate Vapor Vapor Water Oil liquid s.g Fluid Vapor Liquid Nominal Inside Wall Erosional Velocity Pressure BAKER Noise 0 0
Number P&ID Number 0 0 0 0 0 Z Mol. Density Density Density rel. to water Density Viscosity Viscosity Diameter Diameter Thickness Velocity 0.00 Drop FLOW dB r v2 Choice Remark
From To F psia MMSCFD BPD BPD 0 Weight lb/cuft lb/cuft lb/cuft 0 lb/cuft cP cP inch inch inch fps fps psi/100 ft REGIME at 3 ft 0.000 0.000
(*) C = 100 0.00 0.00 0 0.00 0.000 0.000
0 0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 0 0 0 0 0.00 0.00 0.00 0.00 0 0.00
0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 8 7.981 0.322 0 8.86 0.10 ANNULAR 50.32 400.41 0 0.00
Inlet 100 64.7 1 1300 3000 0.99 18.99 0.207 62.29 50.6 0.87 5.10 0.0118 0.6799 6 6.065 0.28 44.2643 15.34 0.38 ANNULAR 64.06 1200.64 SELECTED 0.00
Header
Separator HG-1B GLM- 0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 4 4.026 0.237 0 34.81 2.96 83.46 6183.58 0.00
ANNULAR 0
0 0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 0.00 0.00 0.00 0 0.00
0 0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 0 0 0 0 0.00 0.00 0.00 0.00 0 0.00
0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 2 2.067 0.154 0 10.50 4.16 BUBBLE 75.45 4456.18 0 0.00
Control Degassing 100 19.7 0.0054 0 3000 1 21.06 0.069 62.29 50.69 0.81 40.38 0.0122 0.8236 3 3.068 0.216 15.7359 4.77 0.58 PLUG 55.40 918.13 0 0.00
Valve Boot HG-1B GLM- 0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 4 4.026 0.237 0 2.77 0.15 42.01 309.62 SELECTED 0.00
PLUG
0 0 0 0 0 0 0 0 0 0 0 0.00 0.00 0 0 0 0 0 0 0.00 0.00 0.00 0 0.00
CLIENT : PT INSANI MITRASANI GELAM
PROJECT : GELAM PRODUCTION FACILITY
SUBJECT : TWO PHASE LINE SIZING
REF. : API 14 E

Gas-Liquid Stream

Line Number P&ID Number Temp. Pressure Vapor Rate Water Rate Oil Rate Gas/liquid Vapor Gas s.g Vapor Water Oil liquid s.g Fluid Vapor Liquid Liquid Nominal Inside Wall Pipe Area
Service ratio Z Mol. rel. to air Density Density Density rel. to water Density Viscosity Viscosity Surf. Tension Diameter Diameter Thickness

F psia MMSCFD BPD BPD Weight lb/cuft lb/cuft lb/cuft lb/cuft cP cP dyne/cm inch inch inch sqft
(*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*)

8 7.981 0.322 0.347


Inlet Separator 100 64.7 1 1300 3,000 233 0.9892 18.99 0.6548 0.2068 62.29 50.60 0.8675 5.104 0.0118 0.6799 69.88 6 6.065 0.28 0.201
4 4.026 0.237 0.088

2 2.067 0.154 0.023


To Degassing Boot 100 19.7 0.0054 0 3,000 2 0.9966 21.06 0.7262 0.069 62.29 50.69 0.8123 40.385 0.0122 0.8236 25.23 3 3.068 0.216 0.051
4 4.026 0.237 0.088

ahs/512687406.xls 03/04/2021
JOB NO. : 1335
BY : AHS
CHECKED BY : HS
REV. :A

Vapor Rate Water Rate Oil Rate Fluid Erosional Velocity Pressure Wm G Lm Fi Wm.Lm.Fi G/Lm BAKER Noise
flow Velocity Drop -------- FLOW K/10xD dB

lb/hr lb/hr lb/hr lb/hr fps fps psi/100 ft G REGIME Factor at 3 ft


(*) (*) (*) C = 100 (*)

8.86 0.097 54529 5994 13.877 3610 ANNULAR 50.32


2082 18944 35512.219 56538 44.26 15.34 0.382 94423 10379 1.660 0.919 13.877 6251 ANNULAR 1 64.06
34.81 2.961 214286 23555 13.877 14186 ANNULAR 83.46

10.50 4.156 1526656 535 6694.789 619 BUBBLE 75.45


12 0 35575 35588 15.74 4.77 0.577 692965 243 0.865 2.712 6694.789 281 PLUG 1 55.40
2.77 0.148 402415 141 6694.789 163 PLUG 42.01

ahs/512687406.xls 03/04/2021
SINGGAR MULIA ENGINEERING CONSULTANT

CLIENT : PT INSANI MITRASANI GELAM


PROJECT : GELAM PRODUCTION FACILITY
SUBJECT : TWO PHASE LINE SIZING
REF. : API 14 E

Gas-Liquid Stream

Line Number PFD Number Temp. Pressure Vapor Rate Water Rate Oil Rate Gas/liquid Vapor Gas s.g Vapor Water Oil liquid s.g Fluid Vapor Water Water Nominal Inside Wall Pipe Area
Service ratio Z Mol. rel. to air Density Density Density rel. to water Density Viscosity Viscosity Surf. Tension Diameter Diameter Thickness

F psia MMSCFD BPD BPD Weight lb/cuft lb/cuft lb/cuft lb/cuft cP cP dyne/cm inch inch inch sqft
(*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*)

10 10.02 0.365 0.548


Outlet Cooler SB-E-1420B
HG-3B-7570
SBH-M-10A-043 (2/2) 110 191.7 29.06 37 146.00 158,798 0.9622 21.1 0.7276 0.6877 62.04 39.77 0.7095 0.706 0.0121 0.6121 68.9 12 12 0.375 0.785
14 13.25 0.375 0.958

NOT USED 6 8.065 0.28 0.355


Outlet Cooler SB-E-1420C
HG-3B-7592
SBH-M-10A-043 (2/2) 110 484.7 28.86 16 66.00 351951 0.9085 20.98 0.7234 1.831 62.09 38.04 0.6848 1.850 0.0127 0.6121 68.88 8 10.106 0.322 0.557
10 12.02 0.365 0.788

ahs/512687406.xls 03/04/2021
JOB NO. : 1335
BY : AHS
CHECKED BY : HS
REV. :A

Vapor Rate Water Rate Oil Rate Fluid Erosional Velocity Pressure Wm G Lm Fi Wm.Lm.Fi G/Lm BAKER Noise
flow Velocity Drop -------- FLOW K/10xD dB

lb/hr lb/hr lb/hr lb/hr fps fps psi/100 ft G REGIME Factor at 3 ft


(*) (*) (*) C = 75 (*)

49.69 0.335 981 122785 0.022 40633 WAVE 73.34


67237 537 1358.3587 69132 89.28 34.65 0.136 684 85609 3.022 0.902 0.022 28331 WAVE 1 64.68
28.42 0.083 561 70218 0.022 23237 WAVE 60.06

28.45 0.358 655 187152 0.016 37941 WAVE 69.71


66394 232 587 67214 55.14 18.12 0.116 417 119191 4.933 0.902 0.016 24164 WAVE 1 58.47
12.81 0.049 295 84255 0.016 17081 WAVE 49.61

ahs/512687406.xls 03/04/2021

You might also like