Adg3Fn: 3 Phases 400V AC

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ADG3FN Voltage Monitoring Device

Phase Sequence Control FUNCTIONS


Un < Over Voltage Protection OFF, 410V 500V 1 Phase Sequence Control and Phase Loss
Un > Under Voltage Protection OFF, 300V 390V
2 Under Voltage Protection ( Un > )
Phase Loss
3 Over Voltage Protection ( Un < )
Delay Time (T_dly) 0,1 s 20 s
4 Over and Under Voltage Protection ( Window mode )
Delay Time (T_dly) 0,1 m 20 m
5 Broken Neutral detection
N Broken Neutral detection

Sudden switch OFF: at 50% of Nominal voltage without time count NOTE : Graphics are for off delay modes

L1
1
3 Phases 400V AC~ N L1 L2 L3
L2
Connection Scheme

L3

LED Re

LED

LED

Load
2 Umin+H
Umin
1A Hys= 6V
1A
1A T T T

LED Re
Un>
LED

TECHNICAL DATA:
Rated Voltage (Un) : 3 Phases 400V AC~ 3 Umax
Operating Range : (0,70 – 1,30) x Un (Un : nominal voltage) Umax - H
Hys= 6V
Frequency : 50/60 Hz.
Delay Time : 0,1 – 20 sec.
Contact current : Max.5 A / 250 Vac T T T

Power Consumption : < 2 VA LED Re


Device Protection Class : IP20
Connector Protection Class: IP00 LED Un <
Ambient Temperature : - 20 °C....+ 60 °C
Connection Type : To connection rail in electrical panel 4 Umax
Dimensions : 35x90x58 mm Umax - H
Hys= 6V
Umin+H
Umin
L1 L2 L3 N

T T T

LED Re
3P & 4W
LED Un <
Un>
LED

18 15 16 5 when the broken of the neutral cable, device does not allow the
output. Power of the device must be shut down and after the
neutral cable is repaired, should be give energy.

L1,L2,L3

LED Re
LED N

You might also like