Scribd
Upload
220 views1 page

Nitrogen

This document provides specifications for a pressure transmitter used to measure nitrogen gas pressure. Key details include: - The transmitter will measure pressure between 0-10 barg of nitrogen gas on pipe E010HL01. - It must be suitable for use in a Zone 2, Group IIC hazardous area up to 50°C. - The transmitter will output a 4-20 mA signal with HART communication to allow remote monitoring. - It must be manufactured by VEGA and meet the model number and specifications outlined to ensure proper operation, certification, and safety compliance.

Uploaded by

surendhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
220 views1 page

Nitrogen

This document provides specifications for a pressure transmitter used to measure nitrogen gas pressure. Key details include: - The transmitter will measure pressure between 0-10 barg of nitrogen gas on pipe E010HL01. - It must be suitable for use in a Zone 2, Group IIC hazardous area up to 50°C. - The transmitter will output a 4-20 mA signal with HART communication to allow remote monitoring. - It must be manufactured by VEGA and meet the model number and specifications outlined to ensure proper operation, certification, and safety compliance.

Uploaded by

surendhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1 Tag Number Control function PT 031025 IZA-

2 Service
3 P&ID Location BD1070A-CDT-50-0009 Field
GENERAL 4 Line No. Size Sch 20630-0050-E010HL01-GNB1G23 DN50 mm PN 10
5 Pipe/ Vessel Spec Line I.D. Vessel No. E010HL01 56.3 mm
6 Heating Type Set Temp.
7 Insulation Type Insulation thickness
8 Area Classification SIL Zone- 2 Group- IIC Temp-T3 SIL 2
9 Fluid Fluid Description GNB1G23 Gas/Vapor NITROGEN
10 % / Wt Solids % / Wt Liquids
PROCESS 11 % / Wt Gas % / Wt Vapor 100 %
CONDITIONS 12 Design Pressure Design Temperature barg -1 to 10 °C -10 to 50
13 Pressure Min. Norm. Max. bar-a 5.5 5.9 6.5
14 Temperature Min. Norm. Max. °C 25
15 Corrosive Toxic Pulsation
16 Instrument Type Pressure Transmitter
17 Instrument Range Calibration Range 0 - 10 barg 0 - 7 barg
18 Accuracy 0.10%
19 Element Type Material Diaphragm (ceramic/metalic cell) 1.4404
20 Housing Material Aluminium / Single Chamber
21 Process Connection THREADED G1/2"
22 Flange Material NA
23 Fill Fluid Silicone Oil
PRESSURE 24 Vent Drain NA NA
TRANSMITTER 25 Output Signal Power Supply 4 - 20 mA DC HART 24VDC, Loop Power
26 Ex-Proof Enclosure Class ATEX II 1G,1/2G,2G Ex ia IIC T6 IP 66/67
27 Cable Entry Cable Gland M20 X 1.5 ISO (2 Nos) PA Blue
28 Mounting Bracket Required-See General Note(6)
29 Shut-Off Valve NA
30 Shut-Off Valve Mfr. NA
31 Shut-Off Valve Model NA
32 Seal Type Ext.Length NA NA
33 Process Connection - HP side / LP Side NA NA NA
34 Flange Material NA
35 Diaphragm Material NA
DIAPHRAGM 36 Filling Fluids Flushing Connect NA NA
SEAL 37 Capillary Material NA
38 Capillary Type Capillary Length NA NA
39 Manufacturer NA
40 Model no. NA
41 Mounting Type Scale Remote barg
42 Manifold Material NA NA
43 Communication Protocol HART Tag: P031025
44 Certificate Ex SIL Calibration ATEX SIL2 Required, 5 point
OPTIONS 45 Material Certificate LCD Display Required as per para 6.3 of MR Required in Engineering Unit
46 Syphon NA NA
47 Flange Adaptor Mfr. Flange Adaptor Model NA NA
48 Rotameter Tag No. Medium NA NA
49 Capacity NA
50 Rotameter Mfr. Model NA NA
51 Manufacturer Model VEGA VEGABAR 83
52 Detail Model No, if applicable B83.ACDUHGGEAXAIKKM
PURCHASE 53 MR No. Purchase Order No. BD1070A-1614B_01 1BD1070A-PIT104
54 P.O Item No Serial No.
55
Notes: See notes

Instrument Datasheet
P_XMTR
P01 KR 10-Oct-19 ISSUE FOR PURCHASE
E00 SM 08-May-19 ISSUE FOR ENQUIRY Document Nr. BD1070A-1614B_01 Sheet 1 of 2
Rev. By Date Revision Area : PISA PROJECT
Unit : CDT Form: 403

You might also like