The document describes a millimeter wave radio that operates at 80 GHz and provides up to 2.5 Gbps of throughput. It has a full outdoor design and uses advanced modulation and coding techniques to transmit data over long distances. The radio supports Ethernet and TDM interfaces to connect various network devices.
The document describes a millimeter wave radio that operates at 80 GHz and provides up to 2.5 Gbps of throughput. It has a full outdoor design and uses advanced modulation and coding techniques to transmit data over long distances. The radio supports Ethernet and TDM interfaces to connect various network devices.
The document describes a millimeter wave radio that operates at 80 GHz and provides up to 2.5 Gbps of throughput. It has a full outdoor design and uses advanced modulation and coding techniques to transmit data over long distances. The radio supports Ethernet and TDM interfaces to connect various network devices.
The document describes a millimeter wave radio that operates at 80 GHz and provides up to 2.5 Gbps of throughput. It has a full outdoor design and uses advanced modulation and coding techniques to transmit data over long distances. The radio supports Ethernet and TDM interfaces to connect various network devices.
Next Generation Microwave radio operating in the E-Band. With 2.5 Gbps net throughput and its 80 GHz zero-footprint characteristic, ALFOplus80 is the ideal solution for 2.5 Gbps E-BAND FULL OUTDOOR ultra high capacity wireless links in urban environments for all carrier-class applications (mobile backhaul, enterprise, ISP). Latest synchronization techniques and advanced Ethernet/IP functionalities make ALFOplus80 a-state-of-art IP radio. ALFOplus80 supports the latest SIAE MICROELETTRONICA modem techniques, including the Hitless ACM engine from 4 up to 64 QAM and our advanced Multi-layer Header Compression algorithm. Split mount architecture is also available connecting ALFOplus80 with AGS-H, providing additional TDM Native transport (2xSTM-1 + 16xE1) and tributary interfaces (up 4xGE). 2.5 Gbps E-Band Full Outdoor Series 2.5 Gbps E-Band Full Outdoor Series
ALFOplus80 2.5 Gbps E-Band Full Outdoor Series 2.5 Gbps E-Band Full Outdoor Ser 2.5 Gbps E-Band Full Outdoor Series MILLIMETER WAVE RADIO 2.5 Gbps E-BAND 2.5 Gbps E-Band Fu 2.5 Gbps E-Band Full O FULL OUTDOOR Series MAIN FEATURES Frequency Supported Configurations 80 GHz (71-76 GHz / 81-86 GHz) (1+0), (1+1), (2+0) Up to 2.5 Gbps throughput Modulation Schemes 4/16/64 QAM with Hitless Adaptive Code and Modulation Channel bandwidth from 250 to 1.000 MHz Supported Ethernet Throughput From 250 Mbps to 2.5 Gbps Traffic Interfaces GE electrical /optical 4/16/64 QAM Modulation schemes
Strong FEC profiles for maximum 250 MHz 500 MHz 1000 MHz link availability 4 QAM +18 +18 +18 Power Over Ethernet +15 +15 - 16 QAM Gigabit Ethernet or STM-1 interfaces 64 QAM +13 +13 - InBand and OutBand Management Receiver Sensitivity at BER 10-6 at point C Channel Spacing Layer1,2,3,4 Header Compression (1+0 conf., RF Filter losses included) 250 MHz 500 MHz 1000 MHz (up to + 200% throughput increase) 4 QAM -73 -70 -64 Synchronous Ethernet 16 QAM -64 -61 - AES Encryption 64 QAM -58 -55 - "Fiber Mode" operation for 2x Gigabit Ethernet transparent wire speed Frequency Stability ± 5 ppm connections ATPC 20 dB range implemented in 1 dB steps RTPC Up to 20 dB in 1 dB step, software programmable Packet Fragmentation to minimize latency ODU Connector RJ45 or SFP Optical Plug-in Optimized latency and PDV transport Management Interfaces In-band or out-band management Mechanical Dimensions ODU (W x H x D) 290 x 302,5 x 67,6 (mm) 11,4 x 11,9 x 2,6 (in) Power Supply PoE or separeted power feeding LAYER 2 MAIN FUNCTIONALITIES Power Consumption (per terminal) ≤ 32W in 1+0 configuration ≤ 65W in 1+1 configuration MEF Carrier Ethernet Services Enviromental Performace 8x queues with flexible scheduler ODU Weather Proofing Class IP65 (Strict WFQ and mixed) ODU Temperature Range -35° C to +55 ° C
WRED support for congestion Ethernet Characteristics MAC address switching, ageing and learning VLAN / VLAN stacking (IEE 802.1ad-QinQ) avoidance Ethernet QoS (IEEE 802.1p) Colour-Aware Classification Flow Control (IEEE 802.3x) RMON Statistics (RFC 2819) Per VLAN flexible ingress Policer (CIR & EIR LLF (Link Loss Forwarding) definition) ETH OAM (IEEE 802.1ag / 802.3ah / ITU-T Y.1731) G.8261/8262/8264 SyncE Flexible QoS definition based on VLAN, Selective QinQ based on VLAN and 802.1p priority IPv4, IPv6, MPLS exp bits Compliant with ETSI EN 302 217
Support for G.8032 based rings
VLAN management and rewrite Jumbo Frames up to 10Kbytes In addition to Full Outdoor configuration, Split Mount application is provided connecting Programmable queues length ALFOplus80 with AGS-H indoor unit (AGS-Hybrid). AGS-H Indoor Unit
TYPICAL APPLICATIONS This architecture provides additional High Capacity Native TDM traffic transport up to 2xSTM-1 + 16xE1, which are natively transported through this Single NE System. Moreover, additional interfaces (4xGE) Any-G Mobile Backhaul for Access and and all reliability schemes (1+1 HSB, G.8032 Ring Protection) specific of traditional Split Mount systems aggregation are also available. Interconnection between ALFOplus80 and AGS-H can be selected both, electrical or optical; in case of Last Mile fiber extension for business electrical connectivity, AGS-H can power supply ALFOplus80 with POE directly through LAN data cable. customers Emergency wireless links Complementary solution to fiber build MEMBER OF:
