Suria Engineering: Welding Summary Report For Piping
This welding summary report provides details of 35 welds made for piping spools as part of the TT-307B project. It lists the joint numbers, materials used, welding procedures, welders involved, and non-destructive testing reports for each weld. The welds were made between January 28th and September 9th, 2021 on various pipe spools for vapor outlets, cooling water lines, and lines to and from the crack gas heater according to engineering drawings. NDT reports are still pending for some welds requiring further testing and approval.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
398 views2 pages
Suria Engineering: Welding Summary Report For Piping
This welding summary report provides details of 35 welds made for piping spools as part of the TT-307B project. It lists the joint numbers, materials used, welding procedures, welders involved, and non-destructive testing reports for each weld. The welds were made between January 28th and September 9th, 2021 on various pipe spools for vapor outlets, cooling water lines, and lines to and from the crack gas heater according to engineering drawings. NDT reports are still pending for some welds requiring further testing and approval.