Item

Qty Units Part ID Eng ID Description Engineerin

g
01
02
1.00
1.00
EA
EA
112100001
112200003
0
0
TM120 TORQUE ASSEMBLY
Bill of Material
SPINNER ASSEMBLY, BEARINGS
03 EA 112300004 WRENCH CARRIAGE ASSEMBLY
1.00 0
Part: 1.00 EA102200004
04 122200006 0 SPINNER TRACK JEEP ASSEMBLY
Description: CARRIAGE 2, WRENCH ASSY
05 1.00 EA 131100081 WELDMENT, FILTER MOUNT
Eng ID:
06 1.00 EA0 131100126 WELDMENT, JEEP MOUNT
Drawing ID: 102200004 Rev No: DEV-04
07 1.00 EA 131100177 WELDMENT, VALVE MOUNT
08 1.00 EA 153100125 0 VLV ASSY, HAWE, TM80
09 EA H10341 HIGH PRESSURE FILTER
1.00
10 1.00 EA E12051 SENSOR, TORQUE LINEAR POSITION
11 1.00 EA N10337 PROXIMITY SWITCH, 18mm
12 1.00 EA HJN-18MM HEX NUT, JAM, 18mm
13 2.00 EA E12540 SPACER, 1/2 x .049W TUBE
14 4.00 EA H H-0500NC-0125-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.25, GR8
15 10.00 EA H H-0500NC-0150-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8
16 2.00 EA H H-0625NC-0150-GR8 CAPSCR, HEX HD, 5/8-11UNC x 1.50, GR8
17 2.00 EA SB-0375-0100NC SCREW, SHLDR, 5/16-18NC x 1.00, GR8
18 6.00 EA FW-0500-A WASHER, F, 1/2, PLAIN, TYPE A
19 14.00 EA LW-0500-HS LOCKWASHER, 1/2 HELICAL SPRING
20 2.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING

Printed: 4/9/2007 Page 1 of 1

REV. DESCRIPTION DATE APPROVED
DEV-04 ISSUED FOR MANUALS 05/03/2007

NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT MATTER
CARRIAGE 2 WRENCH ASSEMBLY
www.can
•WEBSITE:

rig.com
HEREOF ARE THE CONFIDENTIAL. SOLE AND EXCLUSIVE
PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR
USED 1 OF 1
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER
WITHOUT WRITTEN CONSENT OR DIRECTION.
CREATED January 29, 2007 11:35:53 AM DEV-04
PART NO 102200004 REV
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
112100001
112300005
0
0
TM120 TORQUE ASSEMBLY
CARRIAGE 3
Bill of Material
03 1.00 EA 131100177 WELDMENT, VALVE MOUNT
04 1.00 EA 153100034 PROFILE DETAIL, FILTER MOUNT FRAME
Description: TM120 CARRIAGE 3 W/O SPINNER & JEEP
06 1.00 EA 153100125 0 VLV ASSY, HAWE, TM80
Eng ID:
07 1.00 EA0 E12541 ENCLOSURE, 12 x 10 x 8
Drawing ID: 102200005 Rev No: DEV-01
08 1.00 EA H10341 HIGH PRESSURE FILTER
09 1.00 EA E12051 SENSOR, TORQUE LINEAR POSITION
10 2.00 EA E12540 SPACER, 1/2 x .049W TUBE
11 4.00 EA H H-0500NC-0150-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8
12 4.00 EA HH-0500NC-0175-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.75, GR8
13 2.00 EA H H-0625NC-0150-GR8 CAPSCR, HEX HD, 5/8-11UNC x 1.50, GR8
14 2.00 EA SB-0375-0100NC SCREW, SHLDR, 5/16-18NC x 1.00, GR8
15 2.00 EA SS-0625NC-0100 SETSCREW 5/8-11UNC x 1.00 FLAT POINT
16 10.00 EA LW-0500-HS LOCKWASHER, 1/2 HELICAL SPRING
17 2.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING
18 2.00 EA HN-0500NC-GR8 HEX NUT, 1/2-13UNC, GR8
50 1.00 EA 161100340 MOUNTING RING, BOTTOM TONG

Printed: 4/9/2007 Page 1 of 1

R DESCRIPTION DATE APPROVED
E
D ISSUED FOR MANUAL 22/02/2007
E

NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT MATTER
TM120 CARRIAGE 3 w/o SPINNER & JEEP
www.can
•WEBSITE:

rig.com
HEREOF ARE THE CONFIDENTIAL. SOLE AND EXCLUSIVE
PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR
USED 1 OF 1
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER
WITHOUT WRITTEN CONSENT OR DIRECTION.
CREATED February 22, 2007 4:49:34 PM PART NO 102200005 DEV-01
REV
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
4.00
1.00
EA
EA
122100003
122100007
0
0
JAW ASSEMBLY
TONG ASSEMBLY
Bill of Material
03 4.00 EA 161100127 MACHINED, JAW RAM PIN
04 1.00 EA 161100029 TORQUE PLATE RAM PIN
Description: TM120 TORQUE ASSEMBLY
05 1.00 EA 161100138 MACHINED, RAM PIN
Eng ID:
06 1.00 EA0 H10338 CYLINDER
Drawing ID: 112100001 Rev No: DEV-13
07 2.00 EA SS-0375NC-0050 SETSCREW 3/8-16UNC x 0.50 CUP POINT
08 2.00 EA M10533 GREASE FITTING
09 16.00 EA H15-3200-12-12 HOSE FTG, STR, 3/4, FEM SWV 3/4 JIC
HOSE FTG, ELL 45°, 3/4, FEM SWV 3/4
10 1.00 EA H15-3204-12-12 JIC
11 2.00 EA H15-070220-12 ELL 90°, MALE 3/4 JIC, MALE 3/4 ORB
12 1.00 EA H15-070120-12-08 ADAPTER, MALE 3/4 JIC, MALE 1/2 ORB
13 5.00 EA H15-070320-12-12 ELL 45°, MALE 3/4 JIC, MALE 3/4 ORB
14 4.00 EA H15-070959-12-12 TEE, BULKHEAD BRANCH, MALE 3/4 JIC

Printed: 4/9/2007 Page 1 of 1

REV. DESCRIPTION DATE APPROVED
DEV-13 ISSUED FOR MANUALS 06/03/2007
NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT
MATTER HEREOF ARE THE CONFIDENTIAL. SOLE
AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGY CANADA LTD, AND ARE NOT TO BE TM120 TORQUE ASSEMBLY 1 OF 1
COPIED, REPRODUCED OR USED IN ANY MANNER
FOR ANY PURPOSE WHATSOEVER WITHOUT
WRITTEN CONSENT OR DIRECTION.

CREATED: January 11, 2007 1:28:14 PM PART NO: 112100001 REV. DEV-13

www.can
•WEBSITE:

rig.com
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
2.00
EA
EA
122200010
122200013
0
0
BULKHEAD MOUNT ASSEMBLY
Bill of Material
ASSEMBLY, SPINNER ROLLER, BEARINGS
03 1.00 EA 131100179 WELDMENT, SPINNER ARM MOUNT LEFT
04 1.00 EA 131100180 WELDMENT, SPINNER ARM RIGHT
Description: SPINNER ASSEMBLY, BEARINGS
05 1.00 EA 131100292 WELDMENT, TRAVELING FRAME
06Eng ID:2.00 0
EA 141100393 PLATE, ALIGNMENT BAR
Drawing ID: 112200003 Rev No: DEV-02
07 8.00 EA 141100394 PLATE, WASHER
08 4.00 EA 161100111 MACHINED, SPINNER PIVOT PIN
09 2.00 EA 161100112 MACHINED, SPINNER RAM PIN
10 2.00 EA 161100120 MACHINED, ALIGNMENT BAR PIN
11 2.00 EA 161100388 ALIGNMENT BAR PIN
12 1.00 EA H10339 CYLINDER
13 8.00 EA M10528 CAM FOLLOWER, ECCENTRIC
14 4.00 EA M10907 BUSHING, IR-1612
15 4.00 EA M10601 BUSH, 1.5 B x 1.75 OD x 1 WIDTH
16 10.00 EA M10533 GREASE FITTING
17 2.00 EA HH-0500NC-0100-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8
18 4.00 EA SS-0375NC-0038 SETSCREW 3/8-16UNC x 0.38 CUP POINT
19 2.00 EA SS-0375NC-0063 SETSCREW, 3/8-16UNC X 0.625, CUP POINT
20 4.00 EA FW-0750-A WASHER, F, 3/4, PLAIN, TYPE A
21 2.00 EA LW-0500-HS LOCKWASHER, 1/2 HELICAL SPRING
22 6.00 EA LW-0750-HS LOCKWASHER, 3/4 HELICAL SPRING
23 8.00 EA LW-0875-HS LOCKWASHER, 7/8 HELICAL SPRING
24 4.00 EA HN-0750NC-GR8 HEX NUT, 3/4-10UNC, GR8
25 8.00 EA HN-0875NC-GR8 HEX NUT, 7/8-9UNC, GR8
26 2.00 EA HN-0625NC-GR8 HEX NUT, 5/8-11UNC, GR8

Printed: 4/9/2007 Page 1 of 1

 NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT
MATTER HEREOF ARE THE CONFIDENTIAL. SOLE
AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGY CANADA LTD, AND ARE NOT TO BE SPINNER ASSEMBLY, BEARINGS 1 OF 1
COPIED, REPRODUCED OR USED IN ANY MANNER
FOR ANY PURPOSE WHATSOEVER WITHOUT
WRITTEN CONSENT OR DIRECTION.

CREATED: January 8, 2007 9:35:43 AM PART NO: 112200003 REV. DEV-02

REV DATE APPROVED

DEV-02 01/03/2007
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
122300013
122300014
0
0
Bill of Material
WRENCH CARRIAGE VERTICAL SHAFT ASSEMBLY
WRENCH CARRIAGE VERTICAL SHAFT ASSEMBLY
03 1.00 EA 122300015 0 SUB ASSEMBLY, LOWER CARRIAGE ASSEMBLY
04 EA 122300018 PROXIMITY FLAG SLIDE MOUNT
1.00 0
Description: WRENCH CARRIAGE ASSEMBLY
05 1.00 EA 131100481 WELDMENT, SPREADER BAR TUBE ASSEMBLY
06Eng ID:2.00 0
EA 131100490 WELDMENT, PTW LIFT CLEVIS
Drawing ID: 112300004 Rev No: DEV-04
07 1.00 EA 131100514 WELDMENT, PROXIMITY FLAG ASSEMBLY
08 1.00 EA 131100519 WELDMENT, SPREADER BAR END ASSEMBLY
09 2.00 EA 141100986 BENDMENT,WRENCH VERTICAL TUBE MOUNT MATE
10 1.00 EA 141101073 PLATE, PROXIMITY SENSOR BRACKET
11 2.00 EA H10432 CYL, 2.00 BORE x 1.25 ROD x 30 STRK
12 6.00 EA HH-0375NC-0075-GR8 CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8
13 16.00 EA HH-0625NC-0175-GR8 CAPSCR, HEX HD, 5/8-11UNC x 1.75, GR8
14 12.00 EA HH-0750NC-0150-GR8 CAPSCR, HEX HD, 3/4-10UNC x 1.50, GR8
15 2.00 EA HH-0750NC-0375-GR8 CAPSCR, HEX HD, 3/4-10UNC x 3.75, GR8
16 2.00 EA HH-1000NC-0250-GR8 CAPSCR, HEX HD, 1-8UNC x 2.50, GR8
17 2.00 EA HH-1000NC-0375-GR8 CAPSCR, HEX HD, 1-8UNC x 3.75, GR8
18 2.00 EA HH-1000NC-0400-GR8 CAPSCR, HEX HD, 1-8UNC x 4.00, GR8
19 2.00 EA SH-1000NC-0250-A CAPSCR, HEX SOC HD, 1-8UNC x 2.50, ALLOY
20 2.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
21 16.00 EA FW-0625-A WASHER, F, 5/8, PLAIN, TYPE A
22 4.00 EA FW-1000-A WASHER, F, 1, PLAIN, TYPE A
23 4.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
24 14.00 EA LW-0750-HS LOCKWASHER, 3/4 HELICAL SPRING
25 6.00 EA LW-1000-HS LOCKWASHER, 1 HELICAL SPR
26 2.00 EA HN-0375NC-GR8 HEX NUT, 3/8-16UNC GR8
27 2.00 EA HN-0750NC-GR8 HEX NUT, 3/4-10UNC, GR8
28 4.00 EA HN-1000NC-GR8 HEX NUT, 1-8UNC, GR8

Printed: 4/9/2007 Page 1 of 1

Ite
m Qty Units Part ID
Eng
ID Description Engineering
Bill of Material
01 1.00 EA 122300019 0 VERTICAL LIFT, CARRIAGE 3
02 1.00 EA 122300020 0 VERTICAL LIFT, CARRIAGE 3
03 1.00 EA 122300021 0 HORIZONTAL SLIDE, CARRIAGE 3
04 1.00 EA 131100648 VERTICAL LIFT, CARRIAGE STYLE 3
Description: CARRIAGE 3
05 1.00 EA 131100650 LOWER MOUNTING BRACKET, CARRIAGE 3
Eng ID: 0
06
Drawing1.00 EA 131100651 LOWER MOUNTING BRACKET RIGHT, CARRIAGE 3
ID: 112300005 Rev No: DEV-04
07 2.00 EA 131100661 TOP MOUNT, CARRIAGE 3
08 2.00 EA 141101526 CYL LOCK PLATE, CARRIAGE 3
09 2.00 EA 161100351 CYLINDER PIN, FRONT
10 2.00 EA 161100352 CYLINDER PIN REAR, CARRIAGE 3
11 2.00 EA H10432 CYL, 2.00 BORE x 1.25 ROD x 30 STRK
12 2.00 EA H10563 CYL, HYD, 30 STRK, 38 LG, 1-1/4 ROD
13 1.00 EA E12377 SENSOR, LINEAR DISPLACEMENT, 750 STRK
14 4.00 EA HH-0250NC-0075-GR8 CAPSCR, HEX HD, 1/4-20UNC x 0.75, GR8
15 1.00 EA H H-0375NC-01375-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.375, GR8
16 24.00 EA HH-0625NC-0175-GR8 CAPSCR, HEX HD, 5/8-11UNC x 1.75, GR8
17 2.00 EA HH-1000NC-0250-GR8 CAPSCR, HEX HD, 1-8UNC x 2.50, GR8
18 4.00 EA H H-1000NC-0350-GR8 CAPSCR, HEX HD, 1-8UNC x 3.50, GR8
19 24.00 EA FW-0625-A WASHER, F, 5/8, PLAIN, TYPE A
20 8.00 EA FW-1000-A WASHER, F, 1, PLAIN, TYPE A
21 2.00 EA LW-0250-HS LOCKWASHER, 1/4 HELICAL SPRING
22 2.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
23 24.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING
24 6.00 EA LW-1000-HS LOCKWASHER, 1 HELICAL SPR
25 2.00 EA HN-0375NC-GR8 HEX NUT, 3/8-16UNC GR8
26 4.00 EA HN-1000NC-GR8 HEX NUT, 1-8UNC, GR8

Printed: 6/5/2008 Page 1 of 1

REV. DESCRIPTION DATE APPROVED
DEV
-04 UPDATED BORDER 01/03/2007
NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT
MATTER HEREOF ARE THE CONFIDENTIAL. SOLE
AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGY CANADA LTD, AND ARE NOT TO BE CARRIAGE 3 1 OF 1
COPIED, REPRODUCED OR USED IN ANY MANNER
FOR ANY PURPOSE WHATSOEVER WITHOUT
WRITTEN CONSENT OR DIRECTION.

CREATED: February 22, 2007 9:08:22 AM PART NO: 112300005 REV. DEV-04

www.can
•WEBSITE:

rig.com
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
2.00
EA
EA
131100184
161100128
WELDMENT, RAM JAW
Bill of Material
MACHINED, DIE RETAINER BLOCK
03 2.00 EA 161100129 MACHINED, DIE RETAINER BOLT
Part: 122100003
04 1.00 EA 161100130 MACHINED, RAM CONNECTION BOLT
Description: JAW ASSEMBLY
05 4.00 EA 161100210 MACHINED, TONG DIE
Eng ID:
06 1.00 EA0 M10533 GREASE FITTING
Drawing ID: 122100003 Rev No: DEV-04
07 2.00 EA R10272 MINI DIE, 2, 3.5 SMALL TOOTH PATTERN
08 1.00 EA H10337 CYL, JAW CLAMP
09 4.00 EA SH-0312NC-0031 CAPSCR, HEX SOC HD, 5/16-18UNC x
0.3125

Printed: 4/9/2007 Page 1 of 1

Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
131100493
131100498
Bill of Material
WELDMENT, LOWER TONG FRAME
WELDMENT, UPPER TONG FRAME
03 2.00 EA 141100402 PLATE, BRASS WEAR RING RETAINER
Part: 122100007
04 1.00 EA 141400003 PLATE, BRASS WEAR RING
Description: TONG ASSEMBLY
05 2.00 EA 161100272 MACHINED, BEARING RING BACKUP
Eng ID:
06 4.00 EA0 M10668 GREASE NIPPLE, 1/8 NPT, 90 DEGREE
Drawing ID: 122100007 Rev No: DEV-04
07 5.00 EA M10533 GREASE FITTING
08 4.00 EA HH-0375NC-0075-GR8 CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8
09 8.00 EA SH-0500NC-0225 CAPSCR, HEX SOC HD, 1/2-13UNC x 2.25
10 4.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
11 8.00 EA LW-0500-HS-HC LOCKWASHER, 1/2 HELICAL SPR, HIGH COLLAR

Printed: 4/9/2007 Page 1 of 1

 NOTICE
- •PHONE: (403) 237-6400 •FAX: (403) 233- THE DRAWINGS, INFORMATION AND SUBJECT
www.c
2667 •WEBSITE:

anrig.c
MATTER HEREOF ARE THE CONFIDENTIAL. SOLE
AND EXCLUSIVE PROPERTY OF CANRIG DRILLING

om
TECHNOLOGY CANADA LTD. AND ARE NOT TO BE
COPIED. REPRODUCED OR USED IN ANY MANNER
FOR ANY PURPOSE WHATSOEVER WITHOUT
WRITTEN CONSENT OR DIRECTION.
REV DESCRIPTION DATE APPROVE
.DEV 06/03/200 D PART
-04 ISSUED FOR MANUALS 7 CREATED: March 6, 2007 2:17:20 PM NO:

TONG
ASSEMBLY
1 OF 2
122100007 REV. DEV-04
 NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT
MATTER HEREOF ARE THE CONFIDENTIAL, SOLE
AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
TECHNOLOGY CANADA LTD, AND ARE NOT TO BE TONG ASSEMBLY 2 OF 2
COPIED, REPRODUCED OR USED IN ANY MANNER
FOR ANY PURPOSE WHATSOEVER WITHOUT
WRITTEN CONSENT OR DIRECTION.
CREATED: March 6, 2007 2:17:20 PM PART NO: 122100007 REV. DEV-04
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
122200007
122200008
0
0
SPINNER TRACK V MOUNT
SPINNER JEEP CARRIAGE
Bill of Material
03 2.00 EA 141100444 PLATE, SPINNER FLOAT SPRING WASHER
04 1.00 EA 158100002 READY ROD 1" - 8 UNC
Description: SPINNER TRACK JEEP ASSEMBLY
05 1.00 EA 161100151 MACHINED, SPINNER JEEP RETAINER
Eng ID:
06 2.00 EA0 M10634 SPRING, COIL, 2500 x 12
Drawing ID: 122200006 Rev No: DEV-04
07 4.00 EA H H-0250NC-0150-GR8 CAPSCR, HEX HD, 1/4-20UNC x 1.50, GR8
08 4.00 EA HH-0625NC-0200-GR8 CAPSCR, HEX HD, 5/8-11UNC x 2.00, GR8
09 4.00 EA FW-0625-A WASHER, F, 5/8, PLAIN, TYPE A
10 4.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING
11 4.00 EA HN-0250NC-GR8 HEX NUT, 1/4-20UNC, GR8
12 4.00 EA HN-1000NC-GR8 HEX NUT, 1-8UNC, GR8

Printed: 4/9/2007 Page 1 of 1

Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
131100123
141100211
WELDMENT, JEEP BED
PLATE, SUPPORT MOUNT
Bill of Material
03 2.00 EA 161100007 MACHINED, SPINNER JEEP SPRING ROD MOUNT
04 2.00 EA HH-0500NC-0625-GR8 CAPSCR, HEX HD, 1/2-13UNC x 6.25, GR8
Description: SPINNER TRACK V MOUNT
05 2.00 EA HH-0500NC-0550-GR8 CAPSCR, HEX HD, 1/2-13UNC x 5.50, GR8
Eng ID:
06 4.00 EA0 FW-0500-A-N WASHER, F, 1/2, TYPE A, NARROW
Drawing ID: 122200007 Rev No: DEV-02

Printed: 4/9/2007 Page 1 of 1

 NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT MATTER
SPINNER TRACK V
www.can
•WEBSITE:

rig.com
HEREOF ARE THE CONFIDENTIAL. SOLE AND EXCLUSIVE
PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR
USED MOUNT 1 OF 1
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER
REV. DESCRIPTION WITHOUT WRITTEN CONSENT OR DIRECTION.
DATE APPROVED
DEV-02 ISSUED FOR MANUAL 108/03/2007 CREATED: March 8, 2007 9:23:44 AM PART NO: 122200007 REV. DEV-02
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
131100124
131100209
Bill of Material
WELDMENT, SPINNER JEEP FRAME
WELDMENT, JEEP ROLLER MOUNT - LH
03 1.00 EA 131100210 WELDMENT, JEEP ROLLER MOUNT - RH
Part: 122200008
04 2.00 EA 141500003 PLATE, SIDE RAIL
Description: SPINNER JEEP CARRIAGE
05 2.00 EA 161100150 MACHINED, SPINNER JEEP STAND OFF
Eng ID:
06 2.00 EA0 M10527 CAM FOLLOWER
Drawing ID: 122200008 Rev No: DEV-04
07 2.00 EA M10528 CAM FOLLOWER, ECCENTRIC
SPRING, 0.437 x 3.374 x 16 x 128
08 2.00 EA M10635 LBS/IN
CAPSCR, HEX HD, 1/2-13UNC x 1.75,
09 8.00 EA HH-0500NC-0175-GR8 GR8
CAPSCR, HEX SOC HD, 1/2-13UNC x
10 2.00 EA SH-0500NC-0125 1.25
11 8.00 EA FH-0312NC-0100 CAPSCREW, FLAT HD, 5/16-18UNC x
1.00
12 8.00 EA LW-0500-HS LOCKWASHER, 1/2 HELICAL SPRING
13 4.00 EA HN-0500NC-GR8 HEX NUT, 1/2-13UNC, GR8
14 2.00 EA HN-0875NC-GR8 HEX NUT, 7/8-9UNC, GR8

Printed: 4/9/2007 Page 1 of 1

 NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT MATTER
SPINNER JEEP CARRIAGE
www.can
•WEBSITE:

rig.com
HEREOF ARE THE CONFIDENTIAL. SOLE AND EXCLUSIVE
PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR
USED 1 OF 1
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER
REV. DESCRIPTION WITHOUT WRITTEN CONSENT OR DIRECTION.
DATE APPROVED
DEV-04 ISSUED FOR MANUAL 108/03/2007 CREATED: March 8, 2007 9:31:17 AM PART NO: 122200008 REV. DEV-04
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
3.00
EA
EA
141100439
H15-070601 -08-08
Bill of Material
PLATE, SPINNER ASSEMBLY HYD. BULKHEAD
UNION, BULKHEAD, MALE 1/2 JIC
03 2.00 EA H15-070701-12-12 ELL 90°, BULKHEAD, MALE 3/4 JIC
04 3.00 EA H15-080118-08 BULKHEAD, NUT, 1/2
Description: BULKHEAD MOUNT ASSEMBLY
05 2.00 EA H15-080118-12 BULKHEAD, NUT, 3/4
Eng ID: 0
Drawing ID: 122200010 Rev No: DEV-01

Printed: 4/9/2007 Page 1 of 1

R DESCRIPTION DATE APPROVE
E
D 06/03/20 D
E ISSUED FOR MANUALS 07

NOTICE
6400 •FAX: (403) THE DRAWINGS, INFORMATION AND SUBJECT

www.c
233-2667 •WEBSITE: MATTER HEREOF ARE THE CONFIDENTIAL. SOLE
AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
anrig.c
om
TECHNOLOGY CANADA LTD, AND ARE NOT TO BE
COPIED, REPRODUCED OR USED IN ANY MANNER
FOR ANY PURPOSE WHATSOEVER WITHOUT
BULKHEAD MOUNT ASSEMBLY 1 OF 1
WRITTEN CONSENT OR DIRECTION.
PART
CREATED: March 6, 2007 4:46:28 PM NO: 122200010 REV. DEV-01
Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
2.00
EA
EA
131100466
M10641
Bill of Material
WELDMENT, ROLLER FRAME, BEARINGS
DOWEL PIN, 1/2 x 1 IN, GRD & HDNED
03 2.00 EA M10601 BUSH, 1.5 B x 1.75 OD x 1 WIDTH
CAPSCR, HEX HD, 5/8-11UNC x 2.25,
04 2.00 EA H H-0625NC-0225-GR8 GR8
Description: ASSEMBLY, ROLLER FRAME
05 2.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING
Eng ID:
06 2.00 EA0 HN-0625NC-GR8 HEX NUT, 5/8-11UNC, GR8
Drawing ID: 122200012 Rev No: DEV-06

Printed: 4/9/2007 Page 1 of 1

Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
122200012
149900001
0 ASSEMBLY, ROLLER FRAME
PLATE, GEAR BOX GASKET
Bill of Material
03 2.00 EA 161100113 MACHINED, GROOVED ROLLER
04
Description: ASSEMBLY, SPINNER ROLLER, BEARINGSMACHINED, SPINNER OUTPUT GEAR
2.00 EA 161100115
05 2.00 EA 161100117 MACHINED, ROLLER KEY
Eng ID:2.00
06 0
EA 161100119 MACHINED, GEAR KEY
Drawing ID: 122200013 Rev No: DEV-02
07 1.00 EA 161100168 MACHINED, SPINNER MOTOR MOUNT
08 1.00 EA 161100169 MACHINED, SPINNER INPUT GEAR
09 1.00 EA 161100170 MACHINED, SPINNER GEAR BOX
10 1.00 EA 161100172 MACHINED, MOTOR SHAFT BUSHING
11 4.00 EA 161100173 MACHINED, 5/8 - 11 UNC STUD
12 2.00 EA 161100253 MACHINED, BEARING CAP
13 2.00 EA 161100259 MACHINED, SPINNER ROLLER SHAFT
14 4.00 EA 161100260 MACHINED, SPACER WASHER
15 2.00 EA 161100261 MACHINED, SPACER GEAR TRUST WASHER
16 1.00 EA 161400005 MACHINED, MOTOR SPACER
17 1.00 EA H10421 MOTOR, HYD, STR KEYED, 10,000 SERIES
18 1.00 EA M10500 BEARING ASSY
19 4.00 EA M10644 BRG, NEEDLE ROL, 60x 85 x 25
20 2.00 EA M10642 DOWEL PIN, 1/2 x 1-1/2 IN, GRD & HDNED
4.00 EA M10533 GREASE FITTING
21
22 4.00 EA S10104 SEAL, STEEL CASE, OIL
23 2.00 EA M10491 RETAINING RING, SPIRAL, EXTERNAL
24 2.00 EA M11-1029-010 RETNG RING, EXT
25 1.00 EA H15-090109B-02 PLUG, SOC HEX, 1/8 ORB
26 1.00 EA P10065 PLUGS, 1/8 IN NPT BREATHER
27 2.00 EA SH-0312NC-0050 CAPSCR, HEX SOC HD, 5/16-18UNC x .50
28 2.00 EA SH-0500NC-0450 CAPSCR, HEX SOC HD, 1/2-13UNC x 4.50
29 8.00 EA BH-0312NC-1000 CAPSCR, BUTTON HD SOC, 5/16-18UNC x 1.00
30 3.00 EA SS-0250NC-0025 SETSCREW 1/4-20UNC x 0.25, CUP POINT
31 4.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING
32 4.00 EA HN-0625NC-GR8 HEX NUT, 5/8-11UNC, GR8

Printed: 4/9/2007 Page 1 of 1

 NOTICE
6400 •FAX: (403) THE DRAWINGS, INFORMATION AND SUBJECT

www.c
233-2667 •WEBSITE: MATTER HEREOF ARE THE CONFIDENTIAL. SOLE
AND EXCLUSIVE PROPERTY OF CANRIG DRILLING
anrig.c
om
TECHNOLOGY CANADA LTD, AND ARE NOT TO BE
COPIED, REPRODUCED OR USED IN ANY MANNER
FOR ANY PURPOSE WHATSOEVER WITHOUT
SPINNER ROLLER, BEARINGS 1 OF 2
WRITTEN CONSENT OR DIRECTION.
PART
CREATED: January 5, 2007 3:11:18 PM NO: 122200013 REV. DEV-02
Ite
m Qty Units Part ID Eng ID Description Engineerin
01 1.00 EA 122300012 0 CARRIAGE STAND RIGHT
g
02
03
1.00
2.00
EA
EA
122300017
131100195
0 CARRIAGE STAND LEFT
Bill of Material
WELDMENT, HORIZONTAL CYLINDER PIN
04 1.00 EA 131100479 WELDMENT, SLIDER TRACK RIGHT
05Description:
1.00 SUB
EA 131100480
ASSEMBLY, LOWER CARRIAGE WELDMENT, SLIDER TRACK LEFT
06 1.00 EAASSEMBLY
131100485 WELDMENT, HORIZONTAL CYL. MOUNT RIGHT
07
Eng ID:1.00 EA
0 131100486 WELDMENT, LVDT GUARD
08Drawing
1.00 EA
ID: 122300015 131100487 WELDMENT,
Rev HORIZONTAL CYL. MOUNT LEFT
No: DEV-02
09 1.00 EA 131100488 WELDMENT DETAIL, TIE PLATE
10 1.00 EA 131100512 WELDMENT DETAIL, CYLINDER GUARD LEFT
11 1.00 EA 131100513 WELDMENT DETAIL, CYLINDER GUARD RIGHT
12 1.00 EA 131100518 WELDMENT, LVDT FRONT MOUNT CLEVIS
13 2.00 EA 131100526 WELDMENT, HORIZONTAL CYLINDER PIN
14 1.00 EA 141100990 BENDMENT, TIE PLATE SUPPORT
15 2.00 EA 141101055 PLATE DETAIL, TIE BAR SPACER
16 2.00 EA 141101071 BENDMENT, HORIZONTAL CYL. GUARD SUPPORT
17 2.00 EA 153100076 PROFILE, TIE SUPPORT ATTACHMENT ANGLE
18 1.00 EA 161500004 MACHINED, BARREL BUSHING
19 2.00 EA H10582 CYL, HYD, 2.5 BORE x 1.5 ROD x 30 IN STR
20 4.00 EA M10940 COTTER PIN 1/4 X 2.50
21 1.00 EA E12055 SENSOR, POSITION, HOR SLIDE
22 4.00 EA HH-0375NC-0075-GR8 CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8
23 4.00 EA HH-0375NC-0088-GR8 CAPSCR, HEX HD, 3/8-16UNC x 0.88, GR8
24 1.00 EA HH-0375NC-0175-GR8 CAPSCR, HEX HD, 3/8-16UNC x 1.75, GR8
25 1.00 EA HH-0375NC-0200-GR8 CAPSCR, HEX HD, 3/8-16UNC x 2.00, GR8
26 6.00 EA H H-0500NC-0125-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.25, GR8
27 2.00 EA HH-0500NC-0100-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8
28 4.00 EA H H-0625NC-0150-GR8 CAPSCR, HEX HD, 5/8-11UNC x 1.50, GR8
29 8.00 EA HH-0500NC-0175-GR8 CAPSCR, HEX HD, 1/2-13UNC x 1.75, GR8
30 2.00 EA HH-0625NC-0250-GR8 CAPSCR, HEX HD, 5/8-11UNC x 2.50, GR8
31 8.00 EA HH-0625NC-0200-GR8 CAPSCR, HEX HD, 5/8-11UNC x 2.00, GR8
32 6.00 EA FH-0500NC-0375 CAPSCREW, FLAT HD, 1/2UNC x 0.375
33 7.00 EA FW-0375-A WASHER, F, 3/8, PLAIN, TYPE A
34 8.00 EA FW-0500-A WASHER, F, 1/2, PLAIN, TYPE A
35 22.00 EA FW-0625-A WASHER, F, 5/8, PLAIN, TYPE A
36 9.00 EA LW-0375-HS LOCKWASHER, 3/8 HELICAL SPRING
37 14.00 EA LW-0500-HS LOCKWASHER, 1/2 HELICAL SPRING
38 22.00 EA LW-0625-HS LOCKWASHER, 5/8 HELICAL SPRING
39 5.00 EA HN-0375NC-GR8 HEX NUT, 3/8-16UNC GR8

Printed: 4/9/2007 Page 1 of 2

Item Qty Units Part ID Eng ID Description

14
Engineerin
40
.0
0 EA HN-0500NC-GR8 HEX NUT, 1/2-13UNC, GR8 g
22
41
.0
EA HN-0625NC-GR8 HEX NUT, 5/8-11UNC, GR8
Bill of Material
Part: 122300015
Description: SUB ASSEMBLY, LOWER CARRIAGE
ASSEMBLY
Eng ID: 0
Drawing ID: 122300015 Rev No: DEV-02

Printed: 4/9/2007 Page 2 of 2

SECTION B-B
SCALE 1 : 5

SCALE 1 : 5

D A C

A
SECTION A-A
SCALE 1 : 40
NOTICE
THE DRAWINGS, INFORMATION AND SUBJECT MATTER
SUB ASSEMBLY, LOWER CARRIAGE
www.can
•WEBSITE:

rig.com
HEREOF ARE THE CONFIDENTIAL. SOLE AND EXCLUSIVE
PROPERTY OF CANRIG DRILLING TECHNOLOGY CANADA
LTD, AND ARE NOT TO BE COPIED, REPRODUCED OR
USED ASSEMBLY
IN ANY MANNER FOR ANY PURPOSE WHATSOEVER
WITHOUT WRITTEN CONSENT OR DIRECTION.
March 7, 2007 12:01:29 PM
2 OF 2
CREATED: PART NO: 122300015 REV. DEV-02
Item
Qty Units Part ID Eng ID Description Engineerin
01 1.00 EA 131100482
g
WELDMENT, WRENCH VERTICAL TUBE
02
03
1.00
2.00
EA
EA
161100144
M10654
Bill
MACHINED, WRENCH CARRIAGE of
VERTICAL Material
SHAFT
WIPER, ROD, 4 SHAFT x 4.624 OD x 0.324 W
04 2.00 EA S10105 SEAL, ROD, 4 SHAFT x 4.624 OD x .423
05 2.00 EA M10652
Description: WRENCH CARRIAGE VERTICAL SHAFT WEAR BAND, 2 W x 3/16 T
ASSEMBLY
Eng ID: 0
Drawing ID: 122300013 Rev No: DEV-01

Printed: 4/9/2007 Page 1 of 1

Item
Qty Units Part ID Eng ID Description Engineerin
01 1.00 EA 131100482
g
WELDMENT, WRENCH VERTICAL TUBE
02
03
1.00
2.00
EA
EA
161100144
M10654
Bill
MACHINED, WRENCH CARRIAGE of
VERTICAL Material
SHAFT
WIPER, ROD, 4 SHAFT x 4.624 OD x 0.324 W
04 2.00 EA S10105 SEAL, ROD, 4 SHAFT x 4.624 OD x .423
05Description:
2.00 EA M10652
WRENCH CARRIAGE VERTICAL SHAFT WEAR BAND, 2 W x 3/16 T
ASSEMBLY
Eng ID: 0
Drawing ID: 122300014 Rev No: DEV-01

Printed: 4/9/2007 Page 1 of 1

 Engineerin
g
Bill of Material
Part: 122300018
Description: PROXIMITY FLAG SLIDE MOUNT

Eng ID: 0
Drawing ID: 122300018 Rev No: DEV-01

Item Qty Units Part ID Eng ID Description

1 1.00 EA 131100551 PROXIMITY GUIDE BRACKET

2 1.00 EA 161100277 MACHINED, PROXIMITY FLAG SLIDER BUSHING

Printed: 4/9/2007 Page 1 of 1

Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
131100649
161100144
VERTICAL TUBE
Bill of Material
WRENCH CARRIAGE VERTICAL SHAFT
WIPER, ROD, 4 SHAFT x 4.624 OD x 0.324
03 2.00 EA M10654 W
04 2.00 EA S10105 SEAL, ROD, 4 SHAFT x 4.624 OD x .423
Description: VERTICAL LIFT, CARRIAGE 3
05 2.00 EA M10652 WEAR BAND, 1 W x 3/16 T
Eng ID: 0
Drawing ID: 122300019 Rev No: DEV-01

Printed: 6/5/2008 Page 1 of 1

Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
1.00
EA
EA
131100667
161100144
Bill of Material
RIGHT VERT TUBE, WELDMENT CARRIAGE 3
MACHINED, WRENCH CARRIAGE VERTICAL SHAFT
03 2.00 EA M10654 WIPER, ROD, 4 SHAFT x 4.624 OD x 0.324 W
04 2.00 EA S10105 SEAL, ROD, 4 SHAFT x 4.624 OD x .423
Description: VERTICAL LIFT, CARRIAGE 3
05 2.00 EA M10652 WEAR BAND, 2 W x 3/16 T
Eng ID: 0
Drawing ID: 122300020 Rev No: DEV-02

Printed: 4/9/2007 Page 1 of 1

Item
Qty Units Part ID Eng ID Description Engineerin
g
01
02
1.00
4.00
EA
EA
131100647
141500044
Bill of Material
HORIZONTAL FRAME, CARRIAGE 3
SLIDE PLATE, HORIZONTAL FRAME
03 2.00 EA 156100068 ROLLER SPACER, HORIZONTAL FRAME
04 2.00 EA M10659 CAM FOLLOWER, 2.5 IN CROWNED
Description: HORIZONTAL SLIDE, CARRIAGE 3
05 4.00 EA M10658 CAM FOLLOWER, 3 IN CROWNED
Eng ID: SETSCREW, 5/16-18UNC X 0.75, CUP
06 16.00 EA0 SS-0312NC-0075 POINT
Drawing ID: 122300021 Rev No: DEV-02
07 1.00 EA LW-1000-HS LOCKWASHER, 1 HELICAL SPR
08 6.00 EA HHJN-1000NC-GR8 HEAVY HEX NUT, JAM, 1-8UNC, GR8

Printed: 4/9/2007 Page 1 of 1