Plug-in / PCB Relays - Overview

Rated No. of
current Contacts Features Sockets

Subminiature DIL relays

- 2 Pole changeover contacts
30 Series - Low level switching capability
2A 2 CO - Subminiature: - industry standard DIL package
- Sensitive DC coil: 200 mW
- Wash tight: RT III

Subminiature PCB relays

6A 1 CO - 1 Pole changeover contacts or 1 Pole normally open contact
32 Series - Subminiature, low profile package
1 NO - Sensitive DC coil: 200 mW
- Wash tight: RT III

Ultra-slim Electromechanical PCB relays

6A 1 CO - Sensitive DC coil: 170 mW
1 NO - 5 mm wide
- 6kV (1.2/50 µs) isolation, coil - contacts
34 Series 93 Series
Ultra-slim Solid State PCB relays
0.1 A 1 output - Sensitive DC input circuits
2 A (SSR) - 5 mm wide
- Silent, high speed switching with long electrical life

Printed circuit relay

10 A 1 CO - 1 Pole changeover contacts or 1 Pole normally open contact
36 Series - Miniature “Sugar Cube” package
1 NO - DC coil: 360 mW
- Wash tight: RT III

Miniature PCB relay

12 A 1 CO - DC coils
- 8mm, 6kV (1.2/50 µs) isolation, coil - contacts
16 A 1 NO
- Flux proof: RT II standard
40 Series - 3.5 or 5 mm pin pitch 95 Series
10 A 1 CO Miniature PCB/plug-in relay
16 A 1 NO - DC coils & AC coils
8A 2 CO - 8mm, 6kV (1.2/50 µs) isolation, coil - contacts
2 NO - 3.5 or 5 mm pin pitch
12 A 1 CO Low profile electromechanical PCB relay
16 A - Low profile, 15.7 mm height
- DC coils: 400mW 93 Series
8A 2 CO - 8mm, 6kV (1.2/50 µs) isolation, coil - contacts
- Flux proof: RT II standard, (RT III option)
41 Series
Low profile Solid State PCB relay
3A 1 output - Low profile, 15.7 mm height
95 Series
5A (SSR) - Sensitive DC input circuits
- Silent, high speed switching with long electrical life

Low profile PCB relay

- Low profile, 15.4 mm height
10 A 1 CO - Sensitive DC coils: 250mW or 400mW
43 Series 95 Series
16 A 1 NO - Very high coil contact isolation 10mm, 6kV (1.2/50 µs)
- Flux proof: RT II standard, (RT III option)
- 3.2 or 5mm pin pitch

Miniature PCB relay

- High physical separation between adjacent contacts
6A 2 CO - DC coils
44 Series 95 Series
10 A - 8mm, 6kV (1.2/50 µs) isolation, coil - contacts
- Flux proof: RT II
- 5mm pin pitch

Miniature PCB relay

- Relay for +125°C ambient use
16 A 1 NO - Contact gap ≥ 3mm according to EN 60730-1
45 Series
1 NC - 8mm, 6kV (1.2/50 µs) isolation, coil - contacts
- Sensitive DC coil: 360mW
- PCB mounting + Faston 250

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 Plug-in / PCB Relays - Overview
Rated No. of
current Contacts Features Sockets

8A 2 CO
Miniature industrial relays
- Socket mount or direct connection via Faston connectors
46 Series - AC & DC coils 97 Series
- Available with lockable test button, mechanical flag & LED indicator
- 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts
16 A 1 CO

Safety relay (EN 50205)

- 2 Pole changeover contacts
- PCB Relay with forcibly guided contacts according to EN 50205 type B
50 Series 8A 2 CO
- High physical separation between adjacent contacts
- 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts
- Flux proof: RT II

10 A 2 CO
3 CO General purpose relays
- AC & DC coils
55 Series - PCB or Plug-in mounting 94 Series
- Available with lockable test button, mechanical flag & LED indicator
7A 4 CO

2 CO Miniature power relays

12 A 2 NO - PCB or Plug-in mounting
56 Series - Flange mount option (Faston 187 termination) 96 Series
4 CO - AC & DC coils
4 NO - Available with lockable test button, mechanical flag & LED indicator

General purpose relays

- 8 & 11 pin plug-in
6A 2 CO - Flange mount
60 Series 90 Series
10 A 3 CO - AC & DC coils, “current sensing relays” or “intensity relays”
- Available with lockable test button, mechanical flag & LED indicator
- Version with bifurcated contacts for low level switching

Power relays
2 CO - PCB mount or Plug-in mount (Faston 187) or
16 A 2 NO Flange mount (Faston 250)
62 Series 92 Series
3 CO - AC & DC coils
3 NO - NO contacts options, > 3mm contact gap
- LED, mechanical indicator & test button options

20 A 1 NO +
1 NC
Power relays
- AC & DC coils
65 Series
- PCB mount or Flange mount (Faston 250)
- NO version, > 3mm contact gap
30 A 1 NO

Power relays
30 A 2 CO - PCB mount or Flange mount (Faston 250)
66 Series
2 NO - AC & DC coils
- 8mm, 6kV (1.2/50 µs) isolation, coil - contacts

Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 30
SERIES

30 Series - Subminiature DIL relays 2 A

Features 30.22
Printed circuit mount
2 A signal relay

Plug-in / PCB Relays

• 2 Pole changeover contacts
Low level switching capability
• Subminiature - industry standard DIL package
• Sensitive DC coil - 200 mW
• Wash tight: RT III
• Cadmium Free contact material

• Low coil power

• Au clad contacts
• PCB mount

Copper side view

Contact specification
Contact configuration 2 CO (DPDT)
Rated current/Maximum peak current A 2/3
Rated voltage/Maximum switching voltage V AC 125/250
Rated load AC1 VA 125
Rated load AC15 (230 V AC) VA 25
Single phase motor rating (230 V AC) kW —
Breaking capacity DC1: 30/110/220 V A 2/0.3/—
Minimum switching load mW (V/mA) 10 (0.1/1)
Standard contact material AgNi + Au
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) —
V DC 5 - 6 - 9 - 12 - 24 - 48
Rated power AC/DC VA (50 Hz)/W —/0.2
Operating range AC —
DC See table page 3
Holding voltage AC/DC —/0.35 UN
Must drop-out voltage AC/DC —/0.05 UN
Technical data
Mechanical life AC/DC cycles —/10 · 106
Electrical life at rated load AC1 cycles 100 · 103
Operate/release time ms 6/2
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 1.5

Dielectric strength between open contacts V AC 750
Ambient temperature range °C –40…+85
Environmental protection RT III
Approvals (according to type)
1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 30
SERIES

30 Series - Subminiature DIL relays 2 A

Ordering information
Example: 30 series PCB relay, 2 CO (DPDT) - 2 A contacts, 12 V sensitive DC coil.

A B C D
Plug-in / PCB Relays

3 0. 2 2 . 7 . 0 1 2 . 0 0 1 0
Series A: Contact material D: Special versions
Type 0 = Standard 0 = Wash tight (RT III)
2 = PCB mount AgNi + Au C: Options
No. of poles B: Contact circuit 1 = None
2 = 2 pole, 2 A 0 = CO (DPDT)

Coil version
7 = Sensitive DC
Coil voltage
See coil specifications

Technical data
Insulation according to EN 61810-1
Nominal voltage of supply system V AC 230/400 120...240 single phase
Rated insulation voltage V AC 250 125
Pollution degree 1 2
Insulation between coil and contact set
Type of insulation Basic Basic
Overvoltage category I II
Rated impulse voltage kV (1.2/50 µs) 1.5 1.5
Dielectric strength V AC 1,000 1,000
Insulation between adjacent contacts
Type of insulation Basic Basic
Overvoltage category I II
Rated impulse voltage kV (1.2/50 µs) 1.5 1.5
Dielectric strength V AC 1,500 1,500
Insulation between open contacts
Type of disconnection Micro-disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 µs) 750/1 750/1
Other data
Bounce time: NO/NC ms 1/3
Vibration resistance (5…55)Hz: NO/NC g 15/15
Shock resistance g 16
Power lost to the environment without contact current W 0.2
with rated current W 0.4
Recommended distance between relays mounted on PCB mm ≥ 5
X-2013, www.findernet.com

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 30
SERIES

30 Series - Subminiature DIL relays 2 A

Contact specification
F 30 - Electrical life (AC1) v contact current (125 V)

Plug-in / PCB Relays

Cycles

Note:
The rated current of 2 A corresponds to the limiting continuous current.

Coil specifications
DC coil data - 0.2 W sensitive R 30 - DC coil operating range v ambient temperature
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
5 7.005 3.7 7.5 125 40
6 7.006 4.5 9 180 33
9 7.009 6.7 13.5 405 22
12 7.012 8.4 18 720 16
24 7.024 16.8 36 2,880 8.3
48 7.048 36 72 11,520 4.1

1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature.
X-2013, www.findernet.com

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 32 Series - Subminiature PCB relays 6 A
Features 32.21-x000 32.21-x300
Printed circuit mount 6 A relay
• 1 Pole changeover contacts or
1 Pole normally open contact
• Subminiature, low profile package
• Sensitive DC coil - 200 mW
• Wash tight: RT III
• Cadmium Free contact material option

• 1 CO (SPDT), 6 A • 1 NO (SPST-NO), 6 A
• Low coil power • Low coil power
• PCB mount • PCB mount

Copper side view Copper side view

Contact specification
Contact configuration 1 CO (SPDT) 1 NO (SPST-NO)
Rated current/Maximum peak current A 6/15 6/15
Rated voltage/Maximum switching voltage V AC 250/400 250/400
Rated load AC1 VA 1,500 1,500
Rated load AC15 (230 V AC) VA 250 250
Single phase motor rating (230 V AC) kW 0.185 0.185
Breaking capacity DC1: 30/110/220 V A 3/0.35/0.2 3/0.35/0.2
Minimum switching load mW (V/mA) 500 (10/5) 500 (10/5)
Standard contact material AgCdO AgCdO
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) — —
V DC 5 - 12 - 24 - 48 5 - 12 - 24 - 48
Rated power AC/DC VA (50 Hz)/W —/0.2 —/0.2
Operating range AC — —
DC (0.78...1.5)UN (0.78...1.5)UN
Holding voltage AC/DC —/0.4 UN —/0.4 UN
Must drop-out voltage AC/DC —/0.1 UN —/0.1 UN
Technical data
Mechanical life AC/DC cycles —/20 · 106 —/20 · 106
3
Electrical life at rated load AC1 cycles 100 · 10 100 · 103
Operate/release time ms 6/4 6/2
Insulation between coil and contacts (1.2/50 µs) kV 5 5
Dielectric strength between open contacts V AC 1,000 1,000
Ambient temperature range °C –40…+85 –40…+85
Environmental protection RT III RT III
Approvals (according to type)

1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 32 Series - Subminiature PCB relays 6 A
Ordering information
Example: 32 series PCB, 1 NO (SPDT-NO) - 6 A contacts, 24 V sensitive DC coil.

A B C D

3 2. 2 1 . 7 . 0 2 4 . 2 3 0 0
Series A: Contact material D: Special versions
Type 2 = Standard AgCdO 0 = Wash tight (RT III)
2 = PCB mount 4 = AgSnO2 C: Options
No. of poles B: Contact circuit 0 = None
1 = 1 pole, 6 A 0 = CO (SPDT)
3 = NO (SPST)
Coil version
7 = Sensitive DC
Coil voltage
See coil specifications

Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.
Type Coil version A B C D
32.21 sens. DC 2-4 0-3 0 0

Technical data
Insulation according to EN 61810-1
Nominal voltage of supply system V AC 230/400
Rated insulation voltage V AC 250
Pollution degree 2
Insulation between coil and contact set
Type of insulation Basic
Overvoltage category III
Rated impulse voltage kV (1.2/50 µs) 5
Dielectric strength V AC 4,000
Insulation between open contacts
Type of disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 µs) 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 µs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 2/10 (changeover) 2/— (normally open)
Vibration resistance (5…55)Hz: NO/NC g 10/10 (changeover) 10/— (normally open)
Shock resistance g 20
Power lost to the environment without contact current W 0.2
with rated current W 0.5
Recommended distance between relays mounted on PCB mm ≥ 5

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 32 Series - Subminiature PCB relays 6 A
Contact specification
F 32 - Electrical life (AC) v contact current H 32 - Maximum DC1 breaking capacity

DC breaking current (A)

Resistive load - cosϕ = 1
Cycles

Inductive load - cosϕ = 0.4

DC voltage (V)

• When switching a resistive load (DC1) having voltage and current

values under the curve, an electrical life of ≥ 100·103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
DC coil data - 0.2 W sensitive R 32 - DC coil operating range v ambient temperature
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
5 7.005 3.9 7.5 125 40
12 7.012 9.4 18 720 16
24 7.024 18.7 36 2,880 8.3
48 7.048 37.4 72 11,520 4

1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature.

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

34 Series - Slim electromechanical PCB relays 6 A

Features 34.51
Ultra-slim 1 Pole - 6 A relay
Printed circuit mount

Plug-in / PCB Relays

- direct or via PCB socket
35 mm rail mount
- via screw or screwless sockets
• 1 Pole changeover contacts or
1 Pole normally open contact
• Ultra slim, 5 mm, package
• Sensitive DC coil - 170 mW (Dual AC/DC coil
drive possible using 93 series sockets) • 5 mm wide
• UL Listing (certain relay/socket combinations) • Low coil power
• PCB or 93 series sockets
• Cadmium Free contact materials
• 8/8 mm clearance/creepage distance
• 6 kV (1.2/50 μs) insulation, coil-contacts

FOR UL RATINGS SEE: Copper side view

“General technical information” page V
Contact specification
Contact configuration 1 CO (SPDT)
Rated current/Maximum peak current A 6/10
Rated voltage/Maximum switching voltage V AC 250/400
Rated load AC1 VA 1,500
Rated load AC15 (230 V AC) VA 300
Single phase motor rating (230 V AC) kW 0.185
Breaking capacity DC1: 30/110/220 V A 6/0.2/0.12
Minimum switching load mW (V/mA) 500 (12/10)
Standard contact material AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) —
V DC 5 - 12 - 24 - 48 - 60
Rated power AC/DC VA (50 Hz)/W —/0.17
Operating range AC —
DC (0.7…1.5)UN
Holding voltage AC/DC —/0.4 UN
Must drop-out voltage AC/DC —/0.05 UN
Technical data
Mechanical life AC/DC cycles —/10 · 106
Electrical life at rated load AC1 cycles 60 · 103
Operate/release time ms 5/3
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 μs) kV 6 (8 mm)

Dielectric strength between open contacts V AC 1,000
Ambient temperature range °C –40…+85
Environmental protection RT II
Approvals (according to type)
1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

34 Series - Slim solid state PCB relays (SSR) 0.1 - 2 A

Features 34.81-9024 34.81-7048 34.81-8240
Ultra-slim - Solid State Relays
Printed circuit mount
Plug-in / PCB Relays

- direct or via PCB socket

35 mm rail mount
- via screw or screwless sockets
• Single circuit output switching options
- 2 A 24 V DC
- 0.1 A 48 V DC
- 2 A 240 V AC
• Silent, high speed switching with long • 2 A, 24 V DC output • 0.1 A, 48 V DC output • 2 A, 240 V AC output switching
electrical life switching switching • Zero crossing switching
• Ultra slim, 5 mm, package • PCB or 93 series sockets • PCB or 93 series sockets • PCB or 93 series sockets

• Sensitive DC Input circuits (Dual AC/DC

input drive possible using 93 series sockets)
• UL Listing (certain relay/socket combinations)
• Wash tight: RT III
• 2,500 V insulation, input-output

input output input output input output

Copper side view Copper side view Copper side view

Output circuit
Contact configuration 1 NO (SPST-NO) 1 NO (SPST-NO) 1 NO (SPST-NO)
Rated current/Maximum peak current (10 ms) A 2/20 0.1/0.5 2/40
Rated voltage/Maximum blocking voltage V (24/33)DC (48/60)DC (240/275)AC
Switching voltage range V (1.5...24)DC (1.5...48)DC (12...240)AC
Minimum switching current mA 1 0.05 22
Max. “OFF-state” leakage current mA 0.001 0.001 1.5
Max. “ON-state” voltage drop V 0.12 1 1.6
Input circuit
Nominal voltage V DC 5 12 24 60 24 60 5 12 24 60
Rated power AC/DC W 0.035 0.087 0.17 0.18 0.17 0.18 0.060 0.087 0.17 0.18
Operating range V DC 3.5...12 8...17 16...30 35...72 16...30 35...72 3.5...10 8...17 16...30 35...72
Control current mA 7 7.2 7 3 7 3 12 7.2 7 3
Release voltage V DC 1 4 10 20 10 20 1 4 10 20
Impedance Ω 715 1,940 3,200 21,300 3,200 21,300 416 1,940 3,200 21,300
Technical data
Operate/release time ms 0.1/0.6* 0.04/0.6* 12/12*
Dielectric strength between input/output V 2,500 2,500 2,500
Ambient temperature range °C –20...+60 –20...+60 –20...+60
Environmental protection RT III RT III RT III
Approvals (according to type)

* Note: all technical data relates to using the relay directly on PCB or PCB socket type 93.11.
If the relay is used with 35 mm rail socket type 93.51, refer to the technical data of 38 Series; if used with types 93.61, 93.62, 93.63, 93.64
and 93.68, refer to the technical data of the MasterINTERFACE 39 Series.
X-2013, www.findernet.com

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

34 Series - Ultra-Slim PCB relays

Ordering information
Electromechanical relay (EMR)
Example: 34 series slim electromechanical relay, 1 CO (SPDT) 6 A contacts, 24 V sensitive DC coil.

Plug-in / PCB Relays

A B C D

3 4 . 5 1 . 7 . 0 2 4 . 0 0 1 0
Series A: Contact material D: Special versions
Type 0 = Standard AgNi 0 = Flux proof (RT II)
5 = Electromechanical type 4 = AgSnO2 9 = Flat version
5 = AgNi + Au C: Options
No. of poles
1 = 1 pole, 6 A B: Contact circuit 1 = None
0 = CO (SPDT)
Coil version
3 = NO (SPST)
7 = Sensitive DC
Coil voltage
See coil specifications

Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.
Type Coil version A B C D
34.51 sens. DC 0-4-5 0-3 1 0
34.51 sens. DC 0-4-5 0 1 9

Solid state relay (SSR)

Example: 34 series SSR relay, 2 A output, 24 V DC supply.

3 4 . 8 1 . 7 . 0 2 4 . 9 0 2 4
Series Output circuit
Type 9024 = 2 A - 24 V DC
8 = SSR type 7048 = 0.1 A - 48 V DC
8240 = 2 A - 240 V AC
Output
1 = 1 NO (SPST-NO)
Input circuit
See input specifications

Flat pack version

X-2013, www.findernet.com

Copper side view

Option = 34.51.7xxx.x019
A2
A1

12

11

14

Environmental protection RT I

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

34 Series - Ultra-Slim PCB relays

Electromechanical relay
Technical data
Insulation according to EN 61810-1
Plug-in / PCB Relays

Nominal voltage of supply system V AC 230/400

Rated insulation voltage V AC 250 400
Pollution degree 3 2
Insulation between coil and contact set
Type of insulation Reinforced
Overvoltage category III
Rated impulse voltage kV (1.2/50 μs) 6
Dielectric strength V AC 4,000
Insulation between open contacts
Type of disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 μs) 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 μs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 1/6
Vibration resistance (5…55)Hz: NO/NC g 10/5
Shock resistance g 20/14
Power lost to the environment without contact current W 0.2
with rated current W 0.5
Recommended distance between relays mounted on PCB mm ≥ 5

Contact specification
F 34 - Electrical life (AC) v contact current H 34 - Maximum DC1 breaking capacity
DC breaking current (A)

Resistive load - cosϕ = 1

Inductive load - cosϕ = 0.4
Cycles

DC voltage (V)

• When switching a resistive load (DC1) having voltage and current

values under the curve, an electrical life of ≥ 60·103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
DC coil data R 34 - DC coil operating range v ambient temperature
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
5 7.005 3.5 7.5 130 38.4
12 7.012 8.4 18 840 14.2
24 7.024 16.8 36 3,350 7.1
48 7.048 33.6 72 12,300 3.9
X-2013, www.findernet.com

60 7.060 42 90 19,700 3

1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature.
4
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

34 Series - Ultra-Slim PCB relays

Solid state relay
Technical data
Other data

Plug-in / PCB Relays

Power lost to the environment without output current W 0.17
with rated current W 0.4

Input specification
Input data - DC types
Nominal Input Operating range Release Impedance Control
voltage code voltage current
UN Umin Umax I at UN
V V V V Ω mA
5 7.005 3.5 12 (10*) 1 715 (416*) 7 (12*)
12 7.012 8 17 4 1,940 7.2
24 7.024 16 30 10 3,200 7
60 7.060 35 72 20 21,300 3
* AC Output version.

Output specification
L 34 - Output current v ambient temperature L 34 - Output current v ambient temperature
SSR - 2 A DC & AC output types SSR - 0.1 A DC output types
Output current
Output current
X-2013, www.findernet.com

5
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

93 Series - Sockets and accessories for 34 series relays

Screw terminal socket 35mm rail mounting (EN 60715)

Common features
- Space saving 6.2 mm wide
Plug-in / PCB Relays

- Connections for 16-way jumper link

- Integral coil indication and protection circuit
93.61 - Secure retention and easy ejection by plastic clip
- Dual screw head (blade+cross) terminals

For technical data and supply versions, refer to the MasterINTERFACE 39 Series – “Relay interface module”

Electromechanical Relay - EMR

93.62 Socket type (reference with the 39 Series)
Supply voltage Relay type MasterBASIC MasterPLUS MasterINPUT MasterOUTPUT MasterTIMER
(39.11…..) (39.31…..) (39.41…..) (39.21…..) (39.81…..)
6 V AC/DC 34.51.7.005.xx10 93.61.7.024 93.63.7.024 93.64.0.024 93.62.7.024 —
12 V AC/DC 34.51.7.012.xx10 93.61.7.024 93.63.7.024 93.64.0.024 93.62.7.024 93.68.0.024
24 V AC/DC 34.51.7.024.xx10 93.61.7.024 93.63.7.024 93.64.0.024 93.62.7.024 93.68.0.024
60 V AC/DC 34.51.7.060.xx10 — 93.63.7.060 — — —
93.63 (110…125)V AC * 34.51.7.060.xx10 — 93.63.3.125 — — —
(220…240)V AC * 34.51.7.060.xx10 — 93.63.3.230 — — —
(110…125)V AC/DC 34.51.7.060.xx10 — 93.63.0.125 93.64.0.125 93.62.0.125 —
(220…240)V AC 34.51.7.060.xx10 93.61.8.230 93.63.8.230 93.64.8.230 93.62.8.230 —
(110…125) V DC 34.51.7.060.xx10 — 93.63.7.125 — — —
220 V DC 34.51.7.060.xx10 — 93.63.7.220 — — —
* Leakage current suppression
93.64

Solid State Relay - SSR

Socket type (reference with the 39 Series)
Supply voltage Relay type MasterBASIC MasterPLUS MasterINPUT MasterOUTPUT MasterTIMER
(39.10…..) (39.30…..) (39.40…..) (39.20…..) (39.80…..)
12 V AC/DC 34.81.7.012.xxxx — — — — 93.68.0.024
24 V AC/DC 34.81.7.024.xxxx — 93.63.0.024 93.64.0.024 — 93.68.0.024
93.68
(110…125)V AC * 34.81.7.060.xxxx — 93.63.3.125 — — —
Approvals (220…240)V AC * 34.81.7.060.xxxx — 93.63.3.230 — — —
(according to type): (110…125)V AC/DC 34.81.7.060.xxxx — 93.63.0.125 93.64.0.125 93.62.0.125 —
(220…240)V AC 34.81.7.060.xxxx 93.61.8.230 93.63.8.230 93.64.8.230 93.62.8.230 —
6 V DC 34.81.7.005.xxxx 93.61.7.024 93.63.7.024 93.64.0.024 93.62.7.024 —
12 V DC 34.81.7.012.xxxx 93.61.7.024 93.63.7.024 93.64.0.024 93.62.7.024 —
24 V DC 34.81.7.024.xxxx 93.61.7.024 93.63.7.024 93.64.0.024 93.62.7.024 —
60 V DC 34.81.7.060.xxxx — 93.63.7.060 — — —
(110…125) V DC 34.81.7.060.xxxx — 93.63.7.125 — — —
220 V DC 34.81.7.060.xxxx — 93.63.7.220 — — —
* Leakage current suppression

Accessories
16-way jumper link 093.16 (blue), 093.16.0 (black), 093.16.1 (red)
Dual-purpose plastic separator 093.60
Sheet of marker tags 060.72
Technical data
Rated values 6 A – 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP20
Ambient temperature °C −40…+70
Screw torque Nm 0.5
X-2013, www.findernet.com

Wire strip length mm 10

Max wire size Solid wire and stranded wire
mm2 1 x 2.5 / 2 x 1.5
AWG 1 x 14 / 2 x 16

6
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

93 Series - Sockets and accessories for 34 series relays

Screw less terminal socket 35mm rail mounting (EN 60715)

Common features
- Space saving 6.2 mm wide

Plug-in / PCB Relays

- Connections for 20-way jumper link
- Integral coil indication and protection circuit
93.51 - Secure retention and easy ejection by plastic clip
Approvals
(according to type): For technical data and supply versions, refer to the 38 Series – “Relay interface module”

Certain relay/socket
Electromechanical Relay - EMR and Solid State Relay - SSR
combinations
Relay type (reference with the 38 Series)
Supply voltage Electromechnanical relay - EMR Solid State Relay - SSR Socket type
(38.61…..) (38.81…..)
12 V AC/DC 34.51.7.012.xx10 — 93.51.0.024
24 V AC/DC 34.51.7.024.xx10 — 93.51.0.024
(110…125)V AC/DC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.0.125
(220…240)V AC/DC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.0.240
(110…125)V AC/DC * 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.3.125
(220…240)V AC * 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.3.240
(220…240)V AC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.8.240
12 V DC 34.51.7.012.xx10 34.81.7.012.xxxx 93.51.7.024
24 V DC 34.51.7.024.xx10 34.81.7.024.xxxx 93.51.7.024
60 V DC 34.51.7.060.xx10 34.81.7.060.xxxx 93.51.7.060
* Leakage current suppression

Accessories
20-way jumper link 093.20
Plastic separator 093.01
Sheet of marker tags 093.64
Technical data
Rated values 6 A – 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP20
Ambient temperature (UN≤ 60 V/> 60 V) °C −40...+70/−40...+55
Wire strip length mm 10
Max wire size Solid wire and stranded wire
mm2 1 x 2.5 / 2 x 1.5
AWG 1 x 14 / 2 x 16
X-2013, www.findernet.com

7
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 34
SERIES

93 Series - Sockets and accessories for 34 series relays

PCB socket with retaining and release clip 93.11 (blue)

For relay type 34.51, 34.81
Technical data
Plug-in / PCB Relays

Rated values 6 A - 250 V

93.11 Dielectric strength ≥ 6 kV (1.2/50 μs) between coil and contacts
Approvals Protection category IP 20
(according to type): Ambient temperature °C –40…+70

Retaining and release clip use:

Copper side view

(+) (A)

X-2013, www.findernet.com

8
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 36
SERIES

36 Series - Miniature PCB relays 10 A

Features 36.11-4011
Printed circuit mount 10 A relay
• New smaller size
• 1 Pole changeover contacts
• Miniature - “Sugar cube” package
• DC coil - 360 mW
• Wash tight: RT III
• Cadmium Free contact material
• RoHS conform

• 1 CO (SPDT), 10 A
• Sugar cube size
• PCB mount

Copper side view

Contact specification
Contact configuration 1 CO (SPDT)
Rated current/Maximum peak current A 10/15
Rated voltage/Maximum switching voltage V AC 250/250
Rated load AC1 VA 2,500
Rated load AC15 (230 V AC) VA 500
Single phase motor rating (230 V AC) kW 0.37
Breaking capacity DC1: 30/110/220 V A 10/0.3/0.12
Minimum switching load mW (V/mA) 500 (5/100)
Standard contact material AgSnO2
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) —
V DC 3 - 5 - 6 - 9 - 12 - 18 - 24 - 48
Rated power AC/DC VA (50 Hz)/W —/0.36
Operating range AC —
DC (0.75…1.3)UN
Holding voltage AC/DC —/0.4 UN
Must drop-out voltage AC/DC —/0.1 UN
Technical data
Mechanical life AC/DC cycles —/10 · 106
Electrical life at rated load AC1 cycles 50 · 103
Operate/release time ms 10/5
VII-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 3

Dielectric strength between open contacts V AC 750
Ambient temperature range °C –40…+85
Environmental protection RT III
Approvals (according to type)

1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 36
SERIES

36 Series - Miniature PCB relays 10 A

Ordering information
Example: 36 series miniature PCB relay, 1 CO (SPDT) - 10 A contacts, 12 V DC coil.

A B C D

3 6. 1 1 . 9 . 0 1 2 . 4 0 1 1
Series A: Contact material D: Special versions
Type 4 = AgSnO2 1 = Wash tight (RT III)
1 = PCB mount B: Contact circuit C: Options
No. of poles 0 = CO (SPDT) 1 = None
1 = 1 pole, 10 A
Coil version
9 = DC
Coil voltage
See coil specifications

Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.

Type Coil version A B C D

36.11 DC 4 0 1 1

Technical data
Insulation according to EN 61810-1
Nominal voltage of supply system V AC 230/400
Rated insulation voltage V AC 250
Pollution degree 2
Insulation between coil and contact set
Type of insulation Basic
Overvoltage category II
Rated impulse voltage kV (1.2/50 µs) 3
Dielectric strength V AC 2,500
Insulation between open contacts
Type of disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 µs) 750/1.5
Other data
Shock resistance g 10
Bounce time: NO/NC ms 1/6
Vibration resistance (5...55Hz): NO/NC g 14/8
Power lost to the environment
without contact current W 0.4
with rated current W 1.4
Recommended distance between relays mounted on PCB mm ≥ 5
VII-2013, www.findernet.com

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 36
SERIES

36 Series - Miniature PCB relays 10 A

Contact specification
F 36 - Electrical life (AC) v contact current H 36 - Maximum DC1 breaking capacity

DC breaking current (A)

Resistive load - cosϕ = 1
Inductive load - cosϕ = 0.4
Cycles

DC voltage (V)

• When switching a resistive load (DC1) having voltage and current

values under the curve, an electrical life of ≥ 50·103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
DC coil data R 36 - DC coil operating range v ambient temperature
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
3 9.003 2.2 3.9 25 120
5 9.005 3.7 6.5 70 72
6 9.006 4.5 7.8 100 60
9 9.009 6.7 11.7 225 40
12 9.012 9 15.6 400 30
18 9.018 13.5 23.4 900 20
24 9.024 18 31.2 1,600 15
48 9.048 36 62.4 6,400 7.5
1 - Max. permitted coil voltage.
2 - Min. pick-up voltage with coil at ambient temperature.
VII-2013, www.findernet.com

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 12 - 16 A

Features 40.31 40.61
1 Pole relay range
40.31 - 1 Pole 12 A (3.5 mm pin pitch)
40.61 - 1 Pole 16 A (5 mm pin pitch)
• Pin length 3.5 mm for pcb mount
• Pin length 5.3 mm as Plug-in relay
• DC standard (0.65 W) or sensitive (0.5 W)
coils available
• Cadmium Free contact material available
• 6 kV (1.2/50 μs) isolation coil-contacts
• 8 mm creepage and clearance distances
• 3.5 mm contact pin pitch • 5 mm contact pin pitch
between coil and contacts
• 1 Pole 12 A • 1 Pole 16 A
• Meets EN 60335-1 glow wire requirements
• Flux proof: RT II standard or wash tight RT III
• AC inductive load rating (related to AC15
utilisation category) 4 A 250 V approved
according to EN 61810-1:2008
(Annex B tables B1, B2, B3)
3.5 or 5.3*

Copper side view Copper side view

* (3.5 or 5.3) mm see ordering code

Contact specification
Contact configuration 1 CO (SPDT) 1 CO (SPDT)
Rated current/Maximum peak current A 12/20 16/30
Rated voltage/Maximum switching voltage V AC 250/400 250/400
Rated load AC1 VA 3,000 4,000
Rated load AC15 (230 V AC) VA 1,000 1,000
Single phase motor rating (230 V AC) kW 0.55 0.55
Breaking capacity DC1: 30/110/220 V A 12/0.3/0.12 16/0.3/0.12
Minimum switching load mW (V/mA) 300 (5/5) 500 (10/5)
Standard contact material AgNi AgCdO
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) — —
V DC 12 - 24 12 - 24
Rated power DC/sensitive DC W 0.65/0.5 0.65/0.5
Operating range AC — —
DC/sensitive DC (0.73…1.5)UN/(0.73…1.5)UN (0.73...1.5)UN/(0.8…1.5)UN
Holding voltage DC 0.4 UN 0.4 UN
Must drop-out voltage DC 0.1 UN 0.1 UN
Technical data
Mechanical life AC/DC cycles 10 · 106 10 · 106
Electrical life at rated load AC1 cycles 200 · 103 100 · 103
Operate/release time ms 7/3 (10/3 sensitive) 7/3 (10/3 sensitive)
IV-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 μs) kV 6 (8 mm) 6 (8 mm)

Dielectric strength between open contacts V AC 1,000 1,000
Ambient temperature range °C –40…+85 –40…+85
Environmental protection RT II RT II
Approvals (according to type)
1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 12 - 16 A

Ordering information
Example: 40 series PCB relay, 1 CO (SPDT) - 12 A, 24 V DC coil.

A B C D

4 0 . 3 1 . 7 . 0 2 4 . 1 0 2 0
Series A: Contact material D: Special versions
0 = AgNi 0 = Standard flux proof (RT II)
Type
(40.31 Plug-in relays) 1 = Wash tight (RT III)
3 = PCB - 3.5 mm pinning
0 = AgCdO
6 = PCB - 5 mm pinning C: Options
(40.61 Plug-in relays)
No. of poles 0 = Pins length 5.3 mm (Plug-in relays)
1 = AgNi (PCB relays)
1 = 1 pole 2 = Pins length 3.5 mm (PCB relays)
2 = AgCdO
for: 40.31, 12 A (40.61 PCB relays)
40.61, 16 A
B: Contact circuit
Coil version 0 = CO (SPDT)
7 = Sensitive DC 3 = NO (SPST)
9 = Standard DC
Coil voltage
012 = 12 V DC
024 = 24 V DC

Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.
Terminal pin Type Coil version A B C D
PCB-relay, pin length 3.5 mm 40.31 DC/DC sensitive 1 0-3 2 0-1
PCB-relay, pin length 3.5 mm 40.61 DC/DC sensitive 1 - 2 0-3 2 0-1
Plug in relay, pin length 5.3 mm 40.31 DC/DC sensitive 0 0-3 0 0-1
Plug in relay, pin length 5.3 mm 40.61 DC/DC sensitive 0 0-3 0 0-1

Technical data
Insulation according to EN 61810-1
Nominal voltage of supply system V AC 230/400
Rated insulation voltage V AC 250 400
Pollution degree 3 2
Insulation between coil and contact set
Type of insulation Reinforced (8 mm)
Overvoltage category III
Rated impulse voltage kV (1.2/50 μs) 6
Dielectric strength V AC 4,000
Insulation between open contacts
Type of disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 μs) 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 μs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 2/5
Vibration resistance (10…200)Hz: NO/NC g 20/5
Shock resistance NO/NC g 20/5
Power lost to the environment without contact current W 0.5
with rated current W 1.2 (40.31) 1.8 (40.61)
Recommended distance between relays mounted on PCB mm ≥ 5
IV-2013, www.findernet.com

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 12 - 16 A

Contact specification
F 40 - Electrical life (AC) v contact current H 40 - Maximum DC1 breaking capacity
Types 40.31/61

40.61 current limit

DC breaking current (A)

40.31 current limit
Resistive load - cosϕ = 1
* Inductive load - cosϕ = 0.4
Cycles

limit for 40.31

** Inductive
load - AC15

DC voltage (V)

* Inductive load - cosϕ = 0.4: inrush current = rated current • When switching a resistive load (DC1) having voltage and current
** Inductive load - AC15: inrush current = 10 x rated current values under the curve, an electrical life of ≥ 100·103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
DC coil data - 0.5 W sensitive (type 40.31) DC coil data - 0.5 W sensitive (type 40.61)
Nominal Coil Operating range Resistance Rated coil Nominal Coil Operating range Resistance Rated coil
voltage code consumption voltage code consumption
UN Umin Umax R I at UN UN Umin Umax R I at UN
V V V Ω mA V V V Ω mA
12 7.012 8.8 18 288 42 12 7.012 9.6 18 288 42
24 7.024 17.5 36 1,150 21 24 7.024 19.2 36 1,150 21

DC coil data - 0.65 W standard (types 40.31/61)

Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
12 9.012 8.8 18 220 55
24 9.024 17.5 36 900 27

R 40 - DC coil operating range v ambient temperature R 40 - DC coil operating range v ambient temperature
(sensitive coil, 0.5 W) (standard coil, 0.65 W)

40.61

40.31

1 - Max. permitted coil voltage. 1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature. 2 - Min. pick-up voltage with coil at ambient temperature.
IV-2013, www.findernet.com

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Features 40.31 40.51 40.52
1 & 2 Pole relay range
40.31 - 1 Pole 10 A (3.5 mm pin pitch)

Plug-in / PCB Relays

40.51 - 1 Pole 10 A (5 mm pin pitch)
40.52 - 2 Pole 8 A (5 mm pin pitch)
PCB mount
- direct or via PCB socket
35 mm rail mount
- via screw and screwless sockets
• DC coils (standard or sensitive) & AC coils
• Cadmium Free contact material • 3.5 mm contact pin pitch • 5 mm contact pin pitch • 5 mm contact pin pitch
• 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts • 1 Pole 10 A • 1 Pole 10 A • 2 Pole 8 A
• UL Listing (certain relay/socket combinations) • PCB or 95 series sockets • PCB or 95 series sockets • PCB or 95 series sockets

• Flux proof: RT II standard, (RT III option)

• 95 series sockets
• Coil EMC suppression
• Timer accessories 86 series

FOR UL RATINGS SEE: Copper side view Copper side view Copper side view
“General technical information” page V
Contact specification
Contact configuration 1 CO (SPDT) 1 CO (SPDT) 2 CO (DPDT)
Rated current/Maximum peak current A 10/20 10/20 8/15
Rated voltage/Maximum switching voltage V AC 250/400 250/400 250/400
Rated load AC1 VA 2,500 2,500 2,000
Rated load AC15 (230 V AC) VA 500 500 400
Single phase motor rating (230 V AC) kW 0.37 0.37 0.3
Breaking capacity DC1: 30/110/220 V A 10/0.3/0.12 10/0.3/0.12 8/0.3/0.12
Minimum switching load mW (V/mA) 300 (5/5) 300 (5/5) 300 (5/5)
Standard contact material AgNi AgNi AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240
V DC 5 - 6 - 7 - 9 - 12 - 14 - 18 - 21 - 24 - 28 - 36 - 48 - 60 - 90 - 110 - 125
Rated power AC/DC/sens. DC VA (50 Hz)/W/W 1.2/0.65/0.5 1.2/0.65/0.5 1.2/0.65/0.5
Operating range AC (0.8…1.1)UN (0.8…1.1)UN (0.8…1.1)UN
DC/sens. DC (0.73…1.5)UN/(0.73…1.75)UN (0.73…1.5)UN/(0.73…1.75)UN (0.73…1.5)UN/(0.73…1.75)UN
Holding voltage AC/DC 0.8 UN /0.4 UN 0.8 UN /0.4 UN 0.8 UN /0.4 UN
Must drop-out voltage AC/DC 0.2 UN /0.1 UN 0.2 UN /0.1 UN 0.2 UN /0.1 UN
Technical data
Mechanical life AC/DC cycles 10 · 106/20 · 106 10 · 106/20 · 106 10 · 106/20 · 106
Electrical life at rated load AC1 cycles 200 · 103 200 · 103 100 · 103
Operate/release time ms 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive)
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 6 (8 mm) 6 (8 mm) 6 (8 mm)
Dielectric strength between open contacts V AC 1,000 1,000 1,000
Ambient temperature range °C –40…+85 –40…+85 –40…+85
Environmental protection RT II** RT II** RT II**
Approvals (according to type)
1
**Engineering,
Courtesy of Steven See general Inc.technical information
- 230 Ryan Way, South“Guidelines forCA
San Francisco, automatic flow- Main
94080-5370 solder processes”
Office: page II- Outside
(650) 588-9200 . Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Features 40.61 40.xx.6
40.61 - 1 Pole 16 A (5 mm pin pitch)
40.xx.6 - Bistable versions of the 40.31,
Plug-in / PCB Relays

40.51, 40.52 & 40.61 relays

PCB mount
- direct or via PCB socket
35 mm rail mount
- via screw and screwless sockets
• DC coils & AC coils
• Cadmium Free option available
• 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts • 5 mm contact pin pitch • Bistable (single coil) versions
• UL Listing • 1 Pole 16 A of 40.31/51/52/61
(certain 40.61 relay/socket combinations) • PCB or 95 series sockets • PCB or 95 series sockets

• Flux proof: RT II standard, (RT III option)

• 95 series sockets
• Coil EMC suppression
• Timer accessories 86 series
Bistable version (1 coil) types:

40.31.6...
40.51.6...
40.52.6...
40.61.6...
For wiring diagrams see
page 8

FOR UL RATINGS SEE: Copper side view

“General technical information” page V
Contact specification
Contact configuration 1 CO (SPDT)
Rated current/Maximum peak current A 16/30* * With the AgSnO2 material
Rated voltage/Maximum switching voltage V AC 250/400 See relays the maximum peak current is
120 A - 5 ms on normally
Rated load AC1 VA 4,000 40.31 open contact.
Rated load AC15 (230 V AC) VA 750 40.51
Single phase motor rating (230 V AC) kW 0.55 40.52
Breaking capacity DC1: 30/110/220 V A 16/0.3/0.12 40.61
Minimum switching load mW (V/mA) 500 (10/5)
Standard contact material AgCdO
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 5 - 6 - 12 - 24 - 48 - 110
V DC ***See table 5 - 6 - 12 - 24 - 48 - 110 *** Nominal voltage (UN):
Rated power AC/DC/sens. DC VA (50 Hz)/W/W 1.2/0.65/0.5 1.0/1.0/— 5 - 6 - 7 - 9 - 12 - 14 - 18 - 21 -
24 - 28 - 36 - 48 - 60 - 90 -
Operating range AC (0.8…1.1)UN (0.8…1.1)UN 110 - 125 V DC
DC/sens. DC (0.73…1.5)UN/(0.8…1.5)UN (0.8…1.1)UN/—
Holding voltage AC/DC 0.8 UN /0.4 UN —
Must drop-out voltage AC/DC 0.2 UN /0.1 UN —
Technical data
Mechanical life AC/DC cycles 10 · 106/20 · 106 See relays
Electrical life at rated load AC1 cycles 100 · 103 40.31
Operate/release time ms 7/3 - (12/4 sensitive) 40.51
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 6 (8 mm) 40.52

Dielectric strength between open contacts V AC 1,000 40.61
Ambient temperature range °C –40…+85 Min. impulse duration
Environmental protection RT II** ≥ 20 ms
Approvals (according to type)
2
** See Inc.
Courtesy of Steven Engineering, general
- 230 technical
Ryan Way,information “Guidelines
South San Francisco, for automatic
CA 94080-5370 flowOffice:
- Main solder processes”
(650) 588-9200 page II. Local Area: (800) 258-9200 - www.stevenengineering.com
- Outside
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Features 40.11 40.11-2016 40.41
1 Pole relay range
40.11 - 1 Pole 10 A (Flat pack)

Plug-in / PCB Relays

40.11-2016 - 1 Pole 16 A (Flat pack)
40.41 - 1 Pole 10 A (Vertical)
PCB mount
- direct or via PCB socket (40.41 version)
• DC coils
• Cadmium Free option available
• 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts
• 40.41 - NO version available • 1 Pole 10 A • 1 Pole 16 A • 1 Pole 10 A
• Flat pack • Flat pack • Vertical
• PCB mount • PCB mount • PCB or 95 series socket

40.11

40.41

FOR UL RATINGS SEE: Copper side view Copper side view Copper side view
“General technical information” page V
Contact specification
Contact configuration 1 CO (SPDT) 1 CO (SPDT) 1 CO (SPDT)
Rated current/Maximum peak current A 10/20 16/30 10/20
Rated voltage/Maximum switching voltage V AC 250/400 250/400 250/400
Rated load AC1 VA 2,500 4,000 2,500
Rated load AC15 (230 V AC) VA 500 750 500
Single phase motor rating (230 V AC) kW 0.37 0.55 0.37
Breaking capacity DC1: 30/110/220 V A 10/0.3/0.12 16/0.3/0.12 10/0.3/0.12
Minimum switching load mW (V/mA) 300 (5/5) 500 (10/5) 300 (5/5)
Standard contact material AgCdO AgCdO AgCdO
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) — — —
V DC 6 - 12 - 24 - 48 - 60 6 - 12 - 24 - 48 6 - 12 - 24 - 48 - 60
Rated power AC/DC/sens. DC VA (50 Hz)/W/W —/—/0.5 —/—/0.5 —/—/0.5
Operating range AC — — —
DC/sens. DC —/(0.73…1.75)UN —/(0.73…1.5)UN —/(0.73…1.75)UN
Holding voltage AC/DC —/0.4 UN —/0.4 UN —/0.4 UN
Must drop-out voltage AC/DC —/0.1 UN —/0.1 UN —/0.1 UN
Technical data
Mechanical life AC/DC cycles —/20 · 106 —/20 · 106 —/20 · 106
Electrical life at rated load AC1 cycles 200 · 103 50 · 103 200 · 103
Operate/release time ms 12/4 12/4 12/4
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 6 (8 mm) 6 (8 mm) 6 (8 mm)
Dielectric strength between open contacts V AC 1,000 1,000 1,000
Ambient temperature range °C –40…+70 –40…+70 –40…+70
Environmental protection RT I RT I RT I
Approvals (according to type)
3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Ordering information
Example: 40 series PCB relay, 2 CO (DPDT), 230 V AC coil.

A B C D
Plug-in / PCB Relays

4 0 . 5 2 . 8 . 2 3 0 . 0 0 0 0
Series A: Contact material D: Special versions
0 = Standard AgNi 0 = Standard
Type
for 40.31/51/52, 1 = Wash tight (RT III)
1 = PCB - 3.5 mm pinning, flat
AgCdO for 40.61 3 = High temperature (+ 125 °C) wash tight
3 = PCB - 3.5 mm pinning
2 = AgCdO (standard
4 = PCB - 3.5 mm pinning C: Options
for 40.11/41)
5 = PCB - 5 mm pinning 0 = None
4 = AgSnO2
6 = PCB - 5 mm pinning 16 = With rated current 16 A (for 40.11)
5 = AgNi + Au
No. of poles
1 = 1 pole B: Contact circuit
for: 40.11, 10 A/16 A 0 = CO (nPDT)
40.31, 10 A 3 = NO (nPST)
40.41, 10 A
40.51, 10 A
40.61, 16 A
2 = 2 pole
for: 40.52, 8 A
Coil version Selecting features and options: only combinations in the same row are possible.
6 = AC/DC bistable Preferred selections for best availability are shown in bold.
7 = Sensitive DC
8 = AC (50/60 Hz) Type Coil version A B C D
9 = DC 40.11 sensitive DC 2-4 0 0 0
Coil voltage 40.11 sensitive DC 2-4 0 16 /
See coil specifications 40.41 sensitive DC 0-2 0-3 0 0
40.31*/51 AC-sens. DC 0-2-5 0-3 0 0-1
40.31/51 DC 0-2-5 0-3 0 0-1-3
40.52 AC-sens. DC 0-2-5 0-3 0 0-1
40.52 DC 0-2-5 0-3 0 0-1-3
40.61* AC-sens. DC 0-4 0-3 0 0-1
40.61 DC 0-4 0-3 0 0-1-3
40.31/51/ bistable 0 0 0 0
52/61

* As the result of a new production line and increased production capacity, the
design/specification of the sensitive DC version will be changed to align with current
PCB relay versions 40.31.7.0xx.xx20 and 40.61.7.0xx.xx20. This changeover will
occur during the first quarter in 2013 for the types mentioned below.
For full technical data refer to data sheet: PCB/Plug-in relays 12 - 16 A.

40.31 40.31 40.61 40.61

Obsolete New Obsolete New
1 pole 10 A 1 pole 12 A 1 pole 16 A 1 pole 16 A

3.5 mm pin pitch 5 mm pin pitch

For socket** or pcb mount For socket or pcb mount
pin length 5.3 mm pin length 5.3 mm

Code Code
40.31.7.012.0000 40.61.7.012.0000
40.31.7.012.0001 40.61.7.012.0001
40.31.7.012.0300 40.61.7.012.0300
X-2013, www.findernet.com

40.31.7.012.0301 40.61.7.012.0301

40.31.7.024.0000 40.61.7.024.0000
40.31.7.024.0001 40.61.7.024.0001
40.31.7.024.0300 40.61.7.024.0300
40.31.7.024.0301 40.61.7.024.0301

** For 40.31 relays mounted on sockets, the maximum rated current must be limited to 10 A.
4
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Technical data
Insulation according to EN 61810-1
1 pole 2 pole

Plug-in / PCB Relays

Nominal voltage of supply system V AC 230/400 230/400
Rated insulation voltage V AC 250 400 250 400
Pollution degree 3 2 3 2
Insulation between coil and contact set
Type of insulation Reinforced (8 mm) Reinforced (8 mm)
Overvoltage category III III
Rated impulse voltage kV (1.2/50 µs) 6 6
Dielectric strength V AC 4,000 4,000
Insulation between adjacent contacts
Type of insulation — Basic
Overvoltage category — II
Rated impulse voltage kV (1.2/50 µs) — 2.5
Dielectric strength V AC — 2,000
Insulation between open contacts
Type of disconnection Micro-disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 µs) 1,000/1.5 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 µs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 2/5
Vibration resistance (5…55)Hz: NO/NC g 10/4 (1 changeover) 15/3 (2 changeover)
Shock resistance g 13
Power lost to the environment without contact current W 0.6
with rated current W 1.2 (40.11/31/41/51) 2 (40.61/52/40.11-2016)
Recommended distance between relays mounted on PCB mm ≥ 5
X-2013, www.findernet.com

5
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Contact specification
F 40 - Electrical life (AC) v contact current F 40 - Electrical life (AC) v contact current
Types 40.31/51/61 Type 40.52
Plug-in / PCB Relays

Resistive load - cosϕ = 1

Inductive load - cosϕ = 0.4 Resistive load - cosϕ = 1
Cycles

Cycles
Inductive load - cosϕ = 0.4

limit for 40.31/51

F 40 - Electrical life (AC) v contact current H 40 - Maximum DC1 breaking capacity

Types 40.11/41

40.61 current limit

40.11/31/41/51 current limit
DC breaking current (A)

40.52 current limit

Resistive load - cosϕ = 1
Inductive load - cosϕ = 0.4
Cycles

40.52 - 2 contacts in series

limit for single contact

version 10 A

DC voltage (V)

• When switching a resistive load (DC1) having voltage and current

values under the curve, an electrical life of ≥ 100·103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

X-2013, www.findernet.com

6
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Coil specifications
DC coil data - 0.65 W standard (types 40.31/51/52/61) DC coil data - 0.5 W sensitive (types 40.31/51/52/61)
Nominal Coil Operating range Resistance Rated coil Nominal Coil Operating range Resistance Rated coil

Plug-in / PCB Relays

voltage code consumption voltage code consumption
UN Umin Umax R I at UN UN Umin* Umax** R I at UN
V V V Ω mA V V V Ω mA
5 9.005 3.65 7.5 38 130 5 7.005 3.7 8.8 50 100
6 9.006 4.4 9 55 109 6 7.006 4.4 10.5 75 80
7 9.007 5.1 10.5 75 94 7 7.007 5.1 12.2 100 70
9 9.009 6.6 13.5 125 72 9 7.009 6.6 15.8 160 56
12 9.012 8.8 18 220 55 12 7.012 8.8 21 288 42
14 9.014 10.2 21 300 47 14 7.014 10.2 24.5 400 35
18 9.018 13.1 27 500 36 18 7.018 13.2 31.5 650 27.7
21 9.021 15.3 31.5 700 30 21 7.021 15.4 36.9 900 23.4
24 9.024 17.5 36 900 27 24 7.024 17.5 42 1,150 21
28 9.028 20.5 42 1,200 23 28 7.028 20.5 49 1,600 17.5
36 9.036 26.3 54 2,000 18 36 7.036 26.3 63 2,600 13.8
48 9.048 35 72 3,500 14 48 7.048 35 84 4,800 10
60 9.060 43.8 90 5,500 11 60 7.060 43.8 105 7,200 8.4
90 9.090 65.7 135 12,500 7.2 90 7.090 65.7 157 16,200 5.6
110 9.110 80.3 165 18,000 6.2 110 7.110 80.3 192 23,500 4.7
125 9.125 91.2 188 23,500 5.3 125 7.125 91.2 219 32,000 3.9
*Umin = 0.8 UN for 40.61 **Umax = 1.5 UN for 40.61

DC coil data - 0.5 W sensitive (types 40.11/41)

Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax* R I at UN
V V V Ω mA
6 7.006 4.4 10.5 75 80
12 7.012 8.8 21 300 40
24 7.024 17.5 42 1,200 20
48 7.048 35 84 4,600 10.4
60 7.060 43.8 105 7,200 8.3
*Umax = 1.5 UN for 40.11-2016

AC coil data (types 40.31/51/52/61) AC/DC coil data - bistable (types 40.31/51/52/61)
Nominal Coil Operating range Resistance Rated coil Nominal Coil Operating range Resistance Rated coil DC: Release
voltage code consumption voltage code consumption resistance**
UN Umin Umax R I at UN (50Hz) UN Umin Umax R I at UN RDC
V V V Ω mA V V V Ω mA Ω
6 8.006 4.8 6.6 21 168 5 6.005 4 5.5 23 215 37
12 8.012 9.6 13.2 80 90 6 6.006 4.8 6.6 33 165 62
24 8.024 19.2 26.4 320 45 12 6.012 9.6 13.2 130 83 220
48 8.048 38.4 52.8 1,350 21 24 6.024 19.2 26.4 520 40 910
60 8.060 48 66 2,100 16.8 48 6.048 38.4 52.8 2,100 21 3,600
110 8.110 88 121 6,900 9.4 110 6.110 88 121 11,000 10 16,500
120 8.120 96 132 9,000 8.4 ** RDC = Resistance in DC, RAC = 1.3 x RDC 1W
230 8.230 184 253 28,000 5
240 8.240 192 264 31,500 4.1
X-2013, www.findernet.com

7
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 16 A

Coil specifications
R 40 - DC coil operating range v ambient temperature R 40 - DC coil operating range v ambient temperature
Standard coil Sensitive coil, types 40.31/51/52/61
Plug-in / PCB Relays

R 40 - DC coil operating range v ambient temperature R 40 - AC coil operating range v ambient temperature
Sensitive coil, types 40.11/41

1 - Max. permitted coil voltage. 1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature. 2 - Min. pick-up voltage with coil at ambient temperature.

Wiring diagram for 40 series bistable coil version

AC Operation DC Operation

On momentary closure of the SET switch the relay is magnetised through On momentary closure of the SET switch the relay is magnetised and the
the diode and the relay contacts transfer to the set position and remain in relay contacts transfer to the set position and remain in this position.
this position. On momentary closure of the RESET switch the relay is demagnetised
On momentary closure of the RESET switch the relay is demagnetised through limiting resistor (RDC) and the contacts return to the reset position.
X-2013, www.findernet.com

through limiting resistor (RAC) and the contacts return to the reset position.

Notes: The minimum SET or RESET impulse time is 20 ms. The maximum time can be continuous. In practice, always ensure that the SET and RESET
contacts cannot be operated simultaneously.

8
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Socket overview for 40 series relays

Module Socket Relay Description Mounting Accessories

99.02 95.03 40.31 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC
95.05 40.51 - Top terminals - Contacts (EN 60715) mount suppression modules

Plug-in / PCB Relays

40.52 - Bottom terminals - Coil - Jumper link
95.05 40.61 - Timer modules
See page 10 - Plastic retaining and release
clip

Module Socket Relay Description Mounting Accessories

99.80 95.83.3 40.31 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC
95.85.3 40.51 95.83.3 wiring: (EN 60715) mount suppression modules
40.52 - Top terminals - Contacts - Jumper link
40.61 - Bottom terminals - Coil - Plastic retaining and release
95.85.3 clip
See page 11

Module Socket Relay Description Mounting Accessories

99.80 95.93.3 40.31 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC
95.95.3 40.51 - Top terminals - Contacts (EN 60715) mount suppression modules
40.52 - Bottom terminals - Coil - Jumper link
40.61 - Plastic retaining and release
clip
95.95.3
See page 12

Module Socket Relay Description Mounting Accessories

99.02 95.55 40.51 Screwless terminal socket Panel or 35 mm rail - Coil indication and EMC
40.52 - For fast cable connections (EN 60715) mount suppression modules
40.61 - Top terminals - Contacts - Timer modules
- Bottom terminals - Coil - Plastic retaining and release
clip
95.55
See page 13

Module Socket Relay Description Mounting Accessories

99.80 95.55.3 40.51 Screwless terminal socket Panel or 35 mm rail - Coil indication and EMC
40.52 For fast cable connections (EN 60715) mount suppression modules
40.61 - Top terminals - Contacts - Plastic retaining and release
- Bottom terminals - Coil clip

95.55.3
See page 14

Module Socket Relay Description Mounting Accessories

99.01 95.63 40.31 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC
- Top terminals - Contacts (EN 60715) mount suppression modules
- Bottom terminals - Coil - Metal retaining clip
95.63
See page 15

Module Socket Relay Description Mounting Accessories

— 95.65 40.51 Screw terminal (Box clamp) socket Panel or 35 mm rail - Metal retaining clip
40.52 (EN 60715) mount
40.61
95.65
See page 15
X-2013, www.findernet.com

Module Socket Relay Description Mounting Accessories

— 95.13.2 40.31 PCB socket PCB mounting - Metal retaining clip
40.41 - Plastic retaining clip
95.13.2
— 95.15.2 40.51
See page 16
40.52
40.61

9
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Sockets and accessories for 40 series relays

Screw terminal (Box clamp) socket panel or 35 mm rail mount 95.03 (blue) 95.03.0 (black) 95.05 (blue) 95.05.0 (black)
For relay type 40.31 40.51, 40.52, 40.61
Accessories
Plug-in / PCB Relays

Metal retaining clip 095.71

95.05 Plastic retaining and release clip 095.01 095.01.0 095.01 095.01.0
(supplied with socket - packaging code SPA)
Approvals
(according to type): 8-way jumper link 095.18 095.18.0 095.18 095.18.0
Identification tag 095.00.4
Modules (see table below) 99.02
Timer modules (see table below) 86.30
Sheet of marker tags for retaining and release clip 095.01 060.72
Certain relay/socket plastic, 72 tags, 6x12 mm
combinations Technical data
Rated values 10 A - 250 V *
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70 (see diagram L95)
095.01 Screw torque Nm 0.5
Wire strip length mm 8
Max. wire size for 95.03 and 95.05 sockets solid wire stranded wire
mm2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
* For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
060.72 With the relay 40.51 the change-over contact will be 21-12-14.
L 95 - Total socket current vs ambient temperature (95.05)

11 COM
Total socket current (A)

14 NO

12 NC

A2 A1 COIL

95.03 95.05

PEAN
O 8-way jumper link for 95.03 and 95.05 sockets 095.18 (blue) 095.18.0 (black)
EUR

T
N
T E
Rated values 10 A - 250 V
EUR

P A O
PEAN

095.18

86 series timer modules

(12…24)V AC/DC; Bi-function: AI, DI; (0.05s…100h) 86.30.0.024.0000
(110...125)V AC; Bi-function: AI, DI; (0.05s…100h) 86.30.8.120.0000
(230...240)V AC; Bi-function: AI, DI; (0.05s…100h) 86.30.8.240.0000

86.30 Approvals (according to type):

99.02 coil indication and EMC suppression modules for 95.03 and 95.05 sockets
Diode (+A1, standard polarity) (6...220)V DC 99.02.3.000.00
LED (6...24)V DC/AC 99.02.0.024.59
LED (28...60)V DC/AC 99.02.0.060.59
LED (110...240)V DC/AC 99.02.0.230.59
99.02 LED + Diode (+A1, standard polarity) (6...24)V DC 99.02.9.024.99
Approvals LED + Diode (+A1, standard polarity) (28...60)V DC 99.02.9.060.99
(according to type): LED + Diode (+A1, standard polarity) (110...220)V DC 99.02.9.220.99
LED + Varistor (6...24)V DC/AC 99.02.0.024.98
X-2013, www.findernet.com

LED + Varistor (28...60)V DC/AC 99.02.0.060.98

LED + Varistor (110...240)V DC/AC 99.02.0.230.98
DC Modules with RC circuit (6...24)V DC/AC 99.02.0.024.09
non-standard polarity RC circuit (28...60)V DC/AC 99.02.0.060.09
(+A2) on request. RC circuit (110...240)V DC/AC 99.02.0.230.09
Residual current by-pass (110...240)V AC 99.02.8.230.07
10
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Sockets and accessories for 40 series relays

Screw terminal (Box clamp) socket panel or 35 mm rail mount 95.83.3 (blue) 95.83.30 (black) 95.85.3 (blue) 95.85.30 (black)
For relay type 40.31 40.51, 40.52, 40.61
Accessories

Plug-in / PCB Relays

Metal retaining clip 095.71
Plastic retaining and release clip 095.91.3 095.91.30 095.91.3 095.91.30
95.85.3 (supplied with socket - packaging code SPA)
Approvals 8-way jumper link 095.08 095.08.0 095.08 095.08.0
(according to type):
Identification tag 095.80.3
Modules (see table below) 99.80
Sheet of marker tags for retaining and release clip 095.91.3 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V *
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts (95.83.3 only)
Protection category IP 20
Ambient temperature °C –40…+70 (see diagram L95)
095.91.3
Screw torque Nm 0.5
Wire strip length mm 7
Max. wire size for 95.83.3 and 95.85.3 sockets solid wire stranded wire
m2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
* For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
060.72 With the relay 40.51 the change-over contact will be 21-12-14.

L 95 - Total socket current vs ambient temperature (95.85.3)

Total socket current (A)

95.83.3 95.85.3

PEAN
O
8-way jumper link for 95.83.3 and 95.85.3 sockets 095.08 (blue) 095.08.0 (black)
EUR

T
N
T E
EUR

P A O Rated values 10 A - 250 V

PEAN

095.08

99.80 coil indication and EMC suppression modules for 95.83.3 and 95.85.3 sockets
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.80.3.000.00
LED (6...24)V DC/AC 99.80.0.024.59
LED (28...60)V DC/AC 99.80.0.060.59
99.80
LED (110...240)V DC/AC 99.80.0.230.59
Approvals
(according to type): LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99
LED + Varistor (6...24)V DC/AC 99.80.0.024.98
* Modules in Black LED + Varistor (28...60)V DC/AC 99.80.0.060.98
housing are
X-2013, www.findernet.com

LED + Varistor (110...240)V DC/AC 99.80.0.230.98

available on request.
RC circuit (6...24)V DC/AC 99.80.0.024.09
Green LED is standard. RC circuit (28...60)V DC/AC 99.80.0.060.09
Red LED available RC circuit (110...240)V DC/AC 99.80.0.230.09
on request.
Residual current by-pass (110...240)V AC 99.80.8.230.07

11
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Sockets and accessories for 40 series relays

Screw (Box clamp) terminal socket panel or 35 mm rail mount 95.93.3 (blue) 95.93.30 (black) 95.95.3 (blue) 95.95.30 (black)
For relay type 40.31 40.51, 40.52, 40.61
Accessories
Plug-in / PCB Relays

Metal retaining clip 095.71

Plastic retaining and release clip 095.91.3 095.91.30 095.91.3 095.91.30
8-way jumper link 095.08 095.08.0 095.08 095.08.0
95.95.3 Identification tag 095.80.3
Approvals Modules (see table below) 99.80
(according to type): Sheet of marker tags for retaining and release clip 095.91.3 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V *
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70 (see diagram L95)
Screw torque Nm 0.5
095.91.3
Wire strip length mm 8
Max. wire size for 95.93.3 and 95.95.3 sockets solid wire stranded wire
m2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
* For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
With the relay 40.51 the change-over contact will be 21-12-14.
060.72

L 95 - Total socket current vs ambient temperature (95.95.3)

Total socket current (A)

95.93.3 95.95.3

PEAN
O
8-way jumper link for 95.93.3 and 95.95.3 sockets 095.08 (blue) 095.08.0 (black)
EUR

T
N
T E
EUR

P A
PEAN
O Rated values 10 A - 250 V

095.08

99.80 coil indication and EMC suppression modules for 95.93.3 and 95.95.3 sockets
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.80.3.000.00
LED (6...24)V DC/AC 99.80.0.024.59
LED (28...60)V DC/AC 99.80.0.060.59
99.80
LED (110...240)V DC/AC 99.80.0.230.59
Approvals
(according to type): LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99
LED + Varistor (6...24)V DC/AC 99.80.0.024.98
* Modules in Black LED + Varistor (28...60)V DC/AC 99.80.0.060.98
housing are
X-2013, www.findernet.com

LED + Varistor (110...240)V DC/AC 99.80.0.230.98

available on request.
RC circuit (6...24)V DC/AC 99.80.0.024.09
Green LED is standard. RC circuit (28...60)V DC/AC 99.80.0.060.09
Red LED available RC circuit (110...240)V DC/AC 99.80.0.230.09
on request.
Residual current by-pass (110...240)V AC 99.80.8.230.07

12
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Sockets and accessories for 40 series relays

Screwless terminal socket panel or 35 mm rail mount 95.55 (blue) 95.55.0 (black)
For relay type 40.51, 40.52, 40.61
Accessories

Plug-in / PCB Relays

Metal retaining clip 095.71
Plastic retaining and release clip 095.91.3
(supplied with socket - packaging code SPA)
95.55 Modules (see table below) 99.02
Approvals Timer modules (see table below) 86.30
(according to type): Sheet of marker tags for retaining and release clip 095.91.3 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V *
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –25…+70 (see diagram L95)
Wire strip length mm 8
095.91.3 Max. wire size for 95.55 socket solid wire stranded wire
mm2 2x(0.2...1.5) 2x(0.2...1.5)
AWG 2x(24...18) 2x(24...18)
* For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
With the relay 40.51 the change-over contact will be 21-12-14.

060.72

L 95 - Total socket current vs ambient temperature

Total socket current (A)

86 series timer modules

(12…24)V AC/DC; Bi-function: AI, DI; (0.05s…100h) 86.30.0.024.0000
(110...125)V AC; Bi-function: AI, DI; (0.05s…100h) 86.30.8.120.0000
(230...240)V AC; Bi-function: AI, DI; (0.05s…100h) 86.30.8.240.0000

86.30 Approvals
(according to type):

99.02 coil indication and EMC suppression modules for 95.55 socket
Diode (+A1, standard polarity) (6...220)V DC 99.02.3.000.00
LED (6...24)V DC/AC 99.02.0.024.59
LED (28...60)V DC/AC 99.02.0.060.59
LED (110...240)V DC/AC 99.02.0.230.59
99.02 LED + Diode (+A1, standard polarity) (6...24)V DC 99.02.9.024.99
Approvals LED + Diode (+A1, standard polarity) (28...60)V DC 99.02.9.060.99
(according to type): LED + Diode (+A1, standard polarity) (110...220)V DC 99.02.9.220.99
LED + Varistor (6...24)V DC/AC 99.02.0.024.98
LED + Varistor (28...60)V DC/AC 99.02.0.060.98
LED + Varistor (110...240)V DC/AC 99.02.0.230.98
DC Modules with RC circuit (6...24)V DC/AC 99.02.0.024.09
non-standard polarity RC circuit (28...60)V DC/AC 99.02.0.060.09
X-2013, www.findernet.com

(+A2) on request. RC circuit (110...240)V DC/AC 99.02.0.230.09

Residual current by-pass (110...240)V AC 99.02.8.230.07

13
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Sockets and accessories for 40 series relays

Screwless terminal socket panel or 35 mm rail mount 95.55.3 (blue) 95.55.30 (black)
For relay type 40.51, 40.52, 40.61
Accessories
Plug-in / PCB Relays

Metal retaining clip 095.71

Plastic retaining and release clip 095.91.3
(supplied with socket - packaging code SPA)
95.55.3 Modules (see table below) 99.80
Approvals Sheet of marker tags for retaining and release clip 095.91.3 060.72
(according to type): plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V *
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –25…+70 (see diagram L95)
Wire strip length mm 8
Max. wire size for 95.55.3 socket solid wire stranded wire
095.91.3
mm2 2x(0.2...1.5) 2x(0.2...1.5)
AWG 2x(24...18) 2x(24...18)
* For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
With the relay 40.51 the change-over contact will be 21-12-14.
73.7

060.72 24.6 4 4

L 95 - Total socket current vs ambient temperature 21 COM 11

30. 6
24 NO 14
Total socket current (A)

22 NC 12
95. 6

34.7

Ø 3.2
37. 2

30.3

A2 COIL A1

15.8 22.6
32.5

99.80 coil indication and EMC suppression modules for 95.55.3 socket
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.80.3.000.00
LED (6...24)V DC/AC 99.80.0.024.59
LED (28...60)V DC/AC 99.80.0.060.59
99.80
LED (110...240)V DC/AC 99.80.0.230.59
Approvals
(according to type): LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99
LED + Varistor (6...24)V DC/AC 99.80.0.024.98
* Modules in Black LED + Varistor (28...60)V DC/AC 99.80.0.060.98
housing are LED + Varistor (110...240)V DC/AC 99.80.0.230.98
available on request.
RC circuit (6...24)V DC/AC 99.80.0.024.09
Green LED is standard. RC circuit (28...60)V DC/AC 99.80.0.060.09
Red LED available RC circuit (110...240)V DC/AC 99.80.0.230.09
on request.
Residual current by-pass (110...240)V AC 99.80.8.230.07
X-2013, www.findernet.com

14
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Sockets and accessories for 40 series relays

Screw terminal (Box clamp) socket panel or 35 mm rail mount 95.63 (blue) 95.65 (blue)
For relay type 40.31 40.51, 40.52, 40.61
Accessories

Plug-in / PCB Relays

Metal retaining clip 095.71
95.63
8-way jumper link 095.08 095.08
Approvals
Modules (see table below) 99.01 —
(according to type):
Technical data
Rated values 10 A - 250 V *
Dielectric strength (between coil and contacts) 6 kV (1.2/50 µs) 2 kV AC
Protection category IP 20
Ambient temperature °C –40…+70 (see diagram L95)
Screw torque Nm 0.5
Wire strip length mm 7
Max. wire size for 95.63 and 95.65 sockets solid wire stranded wire
m2 1x6 / 2x2.5 1x4 / 2x2.5
95.65
AWG 1x10 / 2x14 1x12 / 2x14
Approvals
(according to type): * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
With the relay 40.51 the change-over contact will be 21-12-14.

L 95 - Total socket current vs ambient temperature

Total socket current (A)

95.63 95.65

PEAN
O
8-way jumper link for 95.63 and 95.65 sockets 095.08 (blue)
EUR

T
N
T E
EUR

P A
PEAN
O
Rated values 10 A - 250 V

095.08

99.01 coil indication and EMC suppression modules for type 95.63 socket
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.01.3.000.00
Diode (+A2, non-standard polarity) (6...220)V DC 99.01.2.000.00
99.01 LED (6...24)V DC/AC 99.01.0.024.59
Approvals LED (28...60)V DC/AC 99.01.0.060.59
(according to type): LED (110...240)V DC/AC 99.01.0.230.59
LED + Diode (+A1, standard polarity) (6...24)V DC 99.01.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.01.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.01.9.220.99
LED + Diode (+A2, non-standard polarity) (6...24)V DC 99.01.9.024.79
LED + Diode (+A2, non-standard polarity) (28...60)V DC 99.01.9.060.79
LED + Diode (+A2, non-standard polarity) (110...220)V DC 99.01.9.220.79
LED + Varistor (6...24)V DC/AC 99.01.0.024.98
X-2013, www.findernet.com

* Modules in Black LED + Varistor (28...60)V DC/AC 99.01.0.060.98

housing are LED + Varistor (110...240)V DC/AC 99.01.0.230.98
available on request.
RC circuit (6...24)V DC/AC 99.01.0.024.09
Green LED is standard. RC circuit (28...60)V DC/AC 99.01.0.060.09
Red LED available on RC circuit (110...240)V DC/AC 99.01.0.230.09
request.
Residual current by-pass (110...240)V AC 99.01.8.230.07
15
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 40
SERIES

95 Series - Sockets and accessories for 40 series relays

PCB socket 95.13.2 (blue) 95.13.20 (black) 95.15.2 (blue) 95.15.20 (black)
For relay type 40.31, 40.41 40.51, 40.52, 40.61
Accessories
Plug-in / PCB Relays

95.13.2 Metal retaining clip (supplied with socket - packaging code SMA) 095.51
Plastic retaining clip 095.52
Technical data
Rated values 10 A - 250 V *
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
95.15.2
Ambient temperature °C –40…+70
Approvals
(according to type): * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
With the relay 40.51 the change-over contact will be 21-12-14.

40.31 40.51
13
7.5 12 14 22 24
3.5

A1 12 11 14
30

11 21
20

3.5

A2 22 21 24
A1 A2
1.5

40.52
95.13.2 95.15.2

Copper side view Copper side view

40.61

Packaging codes
How to code and identify retaining clip and packaging options for sockets.

Example:

9 5 . 0 5 S P A

A Standard packaging

SM Metal retaining clip

X-2013, www.findernet.com

SP Plastic retaining clip

9 5 . 0 5 Without retaining clip

16
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

41 Series - Low profile PCB relays 8 - 12 - 16 A

Features 41.31 41.52 41.61
1 & 2 Pole - Low profile (15.7 mm height)
41.31 - 1 Pole 12 A (3.5 mm pin pitch)

Plug-in / PCB Relays

41.52 - 2 Pole 8 A (5 mm pin pitch)
41.61 - 1 Pole 16 A (5 mm pin pitch)
PCB mount
- direct or via PCB socket
35 mm rail mount
- via screw and screwless sockets
• AC and DC coils
• 8 mm, 6 kV (1.2/50 μs) isolation, coil-contacts • 3.5 mm contact pin pitch • 5 mm contact pin pitch • 5 mm contact pin pitch
• Cadmium Free contact materials • 1 Pole 12 A • 2 Pole 8 A • 1 Pole 16 A
• Flux proof: RT II standard, (RT III option) • PCB direct or via socket • PCB direct or via socket • PCB direct or via socket

FOR UL RATINGS SEE: Copper side view Copper side view Copper side view
“General technical information” page V
Contact specification
Contact configuration 1 CO (SPDT) 2 CO (DPDT) 1 CO (SPDT)
Rated current/Maximum peak current A 12/25 8/15 16/30
Rated voltage/Maximum switching voltage V AC 250/400 250/400 250/400
Rated load AC1 VA 3,000 2,000 4,000
Rated load AC15 (230 V AC) VA 600 400 750
Single phase motor rating (230 V AC) kW 0.5 0.3 0.5
Breaking capacity DC1: 30/110/220 V A 12/0.3/0.12 8/0.3/0.12 16/0.3/0.12
Minimum switching load mW (V/mA) 300 (5/5) 300 (5/5) 300 (5/5)
Standard contact material AgNi AgNi AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) 24 - 230 24 - 230 24 - 230
V DC 5 - 6 - 12 - 24 - 48 - 60 - 110 5 - 6 - 12 - 24 - 48 - 60 - 110 5 - 6 - 12 - 24 - 48 - 60 - 110
Rated power AC/DC VA (50 Hz)/W 0.75/0.4 0.75/0.4 0.75/0.4
Operating range AC (0.8...1.1)UN (0.8...1.1)UN (0.8...1.1)UN
DC (0.7...1.5)UN (0.7...1.5)UN (0.7...1.5)UN
Holding voltage AC/DC 0.8/0.4UN 0.8/0.4 UN 0.8/0.4 UN
Must drop-out voltage AC/DC 0.15/0.1UN 0.15/0.1 UN 0.15/0.1 UN
Technical data
Mechanical life AC/DC cycles 10·106/10·106 10·106/10·106 10·106/10·106
Electrical life at rated load AC1 cycles 60 · 103 60 · 103 50 · 103
Operate/release time ms 5/4 5/4 5/4
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 μs) kV 6 (8 mm) 6 (8 mm) 6 (8 mm)
Dielectric strength between open contacts V AC 1,000 1,000 1,000
Ambient temperature range °C –40…+70 (AC); +85 (DC) –40…+70 (AC); +85 (DC) –40…+70 (AC); +85 (DC)
Environmental protection RT II RT II RT II
Approvals (according to type)

1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

41 Series - Low profile PCB relays (SSR) 3 - 5 A

Features 41.81 - 9024 41.81 - 8240
Solid State Relays
Printed circuit mount:
Plug-in / PCB Relays

- direct or via PCB socket

35 mm rail mount:
- via screw or screwless sockets
• Single circuit output switching options
- 5 A 24 V DC
- 3 A 240 V AC
• Silent, high speed switching with long
electrical life • 5 A, 24 V DC output switching • 3 A, 240 V AC output switching
• LED indicator • PCB or 93 Series sockets • Zero crossing switching
• Low profile (15.7 mm) • PCB or 93 Series sockets

• Wash tight: RT III

• 2,500 V AC insulation, input-output

Copper side view Copper side view

Output circuit
Contact configuration 1 NO (SPST-NO) 1 NO (SPST-NO)
Rated current/Maximum peak current (10 ms) A 5/40 3/40
Rated voltage/Maximum blocking voltage V (24/35)DC (240/275)AC
Switching voltage range V (1.5...24)DC (12...240)AC
Minimum switching current mA 1 50
Max. “OFF-state” leakage current mA 0.01 1
Max. “ON-state” voltage drop V 0.3 1.1
Input circuit
Nominal voltage V DC 12 24 12 24
Operating range V DC 8...17 14...32 8...17 14...32
Control current mA 5.5 9 8.8 9
Release voltage V DC 4 9 4 9
Impedance Ω 1,550 2,600 1,030 2,600
Technical data
Operate/release time ms 0.05/0.25 10/10
Dielectric strength between input/output V AC 2,500 2,500
Ambient temperature range °C –20...+60 –20...+60
Environmental protection RT III RT III
Approvals (according to type)
X-2013, www.findernet.com

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

41 Series - Low profile PCB relays

Ordering information
Electromechanical relay (EMR)
Example: 41 series low-profile PCB relay, 2 CO (DPDT), 24 V DC coil.

Plug-in / PCB Relays

A B C D

4 1 . 5 2 . 9 . 0 2 4 . 0 0 1 0
Series A: Contact material D: Special versions
Type 0 = Standard AgNi 0 = Flux proof (RT II)
3 = PCB - 3.5 mm pinning 4 = AgSnO2 1 = Wash tight (RT III)
5 = PCB - 5 mm pinning 5 = AgNi + Au C: Options
6 = PCB - 5 mm pinning B: Contact circuit 0 = Production line 0
No. of poles 0 = CO (nPDT) 1 = Production line 1
1 = 1 pole for 3 = NO (nPST)
41.31, 12 A
41.61, 16 A
2 = 2 pole for
41.52, 8 A
Coil version
8 = AC
9 = DC
Coil voltage Selecting features and options: only combinations in the same row are possible.
See coil specifications Preferred selections for best availability are shown in bold.
Type Coil version A B C D
41.31 DC 0-4-5 0-3 1 0-1
41.52 DC 0-5 0-3 1 0-1
41.61 DC 0-4 0-3 1 0-1
41.31/52/61 AC 0 0 0 0

Solid state relay (SSR)

Example: 41 series SSR relay, 5 A output, 24 V DC supply.

4 1 . 8 1 . 7 . 0 2 4 . 9 0 2 4
Series Output circuit
Type 9024 = 5 A - 24 V DC
8 = SSR type 8240 = 3 A - 240 V AC

Output
1 = 1 NO (SPST-NO)
Input circuit
See input specifications
X-2013, www.findernet.com

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

41 Series - Low profile PCB relays

Electromechanical relay
Technical data
Insulation according to EN 61810-1
Plug-in / PCB Relays

1 pole 2 pole
Nominal voltage of supply system V AC 230/400 230/400
Rated insulation voltage V AC 250 400 250 400
Pollution degree 3 2 3 2
Insulation between coil and contact set
Type of insulation Reinforced (8 mm) Reinforced (8 mm)
Overvoltage category III III
Rated impulse voltage kV (1.2/50 μs) 6 6
Dielectric strength V AC 4,000 4,000
Insulation between adjacent contacts
Type of insulation — Basic
Overvoltage category — III
Rated impulse voltage kV (1.2/50 μs) — 4
Dielectric strength V AC — 2,000
Insulation between open contacts
Type of disconnection Micro-disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 μs) 1,000/1.5 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 μs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 2/5
Vibration resistance (5…55)Hz: NO/NC g 15/2
Shock resistance g 16
Power lost to the environment without contact current W 0.4
with rated current W 1.7 (41.31) 1.2 (41.52) 1.8 (41.61)
Recommended distance between relays mounted on PCB mm ≥ 5

X-2013, www.findernet.com

4
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

41 Series - Low profile PCB relays

Contact specification
F 41 - Electrical life (AC) v contact current F 41 - Electrical life (AC) v contact current
Types 41.31/61 Type 41.52

Plug-in / PCB Relays

Resistive load - cosϕ = 1
Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4
Inductive load - cosϕ = 0.4
Cycles

Cycles
limit for 41.31

H 41- Maximum DC1 breaking capacity

41.61 limit current

41.31 limit current
41.52 limit current
DC breaking current (A)

41.52 - 2 contacts in series

single contact
• When switching a resistive load (DC1) having voltage and current
values under the curve, an electrical life of ≥ 100·103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
DC voltage (V)
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
AC coil data R 41 - AC coil operating range v ambient temperature
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
24 8.024 19.2 26.4 350 31.6
230 8.230 184 253 32,500 3.2

1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature.

DC coil data R 41 - DC coil operating range v ambient temperature

Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
5 9.005 3.5 7.5 62 80
6 9.006 4.2 9 90 66.7
12 9.012 8.4 18 360 33.3
24 9.024 16.8 36 1,440 16.7
X-2013, www.findernet.com

48 9.048 33.6 72 5,760 8.3

60 9.060 42 90 9,000 6.6
110 9.110 77 165 24,200 4.5

1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature.
5
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

41 Series - Low profile PCB relays

Solid state relay
Technical data
Other data 41.81 - 9024 41.81 - 8240
Plug-in / PCB Relays

Power lost to the environment without current W 0.25 0.25

with maximum current W 1.75 3.5

Input specification
Input data - DC types
Nominal Input Operating range Release Impedance Control
voltage code voltage current
UN Umin Umax I at UN
V V V V Ω mA
12 7.012 8 17 4 1,550 5.5
24 7.024 14 32 9 2,600 9

Output specification
L 41 - Output current v ambient temperature L 41 - Output current v ambient temperature
SSR - 5 A DC output types SSR - 3 A AC output types
Output current
Output current

X-2013, www.findernet.com

6
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

93 Series - Sockets and accessories for 41 series relays

Screw terminal socket 35 mm (EN 60715) mounting

Supply voltage Relay type Socket type

Plug-in / PCB Relays

6 V AC/DC 41.52.9.005.0010 or 41.61.9.005.0010 93.02.0.024
12 V AC/DC 41.52.9.012.0010 or 41.61.9.012.0010 93.02.0.024
93.02 24 V AC/DC 41.52/61.9.024.0010 or 41.81.7.024.xxxx 93.02.0.024
60 V AC/DC 41.52.9.060.0010 or 41.61.9.060.0010 93.02.0.060
Approvals
(according to type): (110...125)V AC/DC 41.52.9.110.0010 or 41.61.9.110.0010 93.02.0.125
(220...240)V AC/DC 41.52.9.110.0010 or 41.61.9.110.0010 93.02.0.240
(230...240)V AC 41.52.9.110.0010 or 41.61.9.110.0010 93.02.8.230
6 V DC 41.52.9.005.0010 or 41.61.9.005.0010 93.02.7.024
12 V DC 41.52/61.9.012.0010 or 41.81.7.012.xxxx 93.02.7.024
24 V DC 41.52/61.9.024.0010 or 41.81.7.024.xxxx 93.02.7.024
48 V DC 41.52.9.048.0010 or 41.61.9.048.0010 93.02.7.060
60 V DC 41.52.9.060.0010 or 41.61.9.060.0010 93.02.7.060
Accessories
8-way jumper link 093.08 (see specification next page)
Plastic separator 093.01 (see specification next page)
Sheet of marker tags, 72 tags 060.72 (see specification next page)
Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP 20
Ambient temperature (UN≤ 60 V/> 60 V) °C –40...+70/–40...+55
Screw torque Nm 0.5
Wire strip length mm 8
Max. wire size for 93.02 socket solid wire stranded wire
mm2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14
X-2013, www.findernet.com

7
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

93 Series - Sockets and accessories for 41 series relays

Screwless terminal socket 35 mm (EN 60715) mounting

Supply voltage Relay type Socket type
6 V AC/DC 41.52.9.005.0010 or 41.61.9.005.0010 93.52.0.024
Plug-in / PCB Relays

12 V AC/DC 41.52.9.012.0010 or 41.61.9.012.0010 93.52.0.024

24 V AC/DC 41.52/61.9.024.0010 or 41.81.7.024.xxxx 93.52.0.024
60 V AC/DC 41.52.9.060.0010 or 41.61.9.060.0010 93.52.0.060
93.52
(110...125)V AC/DC 41.52.9.110.0010 or 41.61.9.110.0010 93.52.0.125
Approvals (220...240)V AC/DC 41.52.9.110.0010 or 41.61.9.110.0010 93.52.0.240
(according to type):
(230...240)V AC 41.52.9.110.0010 or 41.61.9.110.0010 93.52.8.230
6 V DC 41.52.9.005.0010 or 41.61.9.005.0010 93.52.7.024
12 V DC 41.52/61.9.012.0010 or 41.81.7.012.xxxx 93.52.7.024
24 V DC 41.52/61.9.024.0010 or 41.81.7.024.xxxx 93.52.7.024
48 V DC 41.52.9.048.0010 or 41.61.9.048.0010 93.52.7.060
60 V DC 41.52.9.060.0010 or 41.61.9.060.0010 93.52.7.060
Accessories
8-way jumper link 093.08 (see table below)
Plastic separator 093.01 (see table below)
Sheet of marker tags, 72 tags 060.72 (see table below)
Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP 20
Ambient temperature (UN≤ 60 V/> 60 V) °C –40...+70 /–40...+55
Wire strip length mm 8
Max. wire size for 93.52 socket solid wire stranded wire
mm2 1x2.5 1x2.5
AWG 1x14 1x14

Accessories
PEAN
O 8-way jumper link for 93.02 and 93.52 sockets 093.08 (blue) 093.08.0 (black) 093.08.1 (red)
EUR

T
N
T E Rated values 10 A - 250 V
EUR

P A O
PEAN

093.08
Approvals
(according to type):

Plastic separator for 93.02 and 93.52 sockets 093.01

Thickness 2 mm, required at the start and the end of a group of interfaces.
Can be used for visual separation group, must be used for:
- protective separation of different voltages of neighbouring PLC interfaces according to VDE 0106-101
093.01 - protection of cut jumper links
X-2013, www.findernet.com

Sheet of marker tags for 38.x2, plastic, 72 tags, 6x12 mm 060.72

060.72
8
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 41
SERIES

95 Series - Sockets and accessories for 41 series relays

PCB socket 95.13.2 (blue) 95.13.20 (black) 95.15.2 (blue) 95.15.20 (black)
For relay type 41.31 41.52, 41.61, 41.81(1)
Accessories

Plug-in / PCB Relays

95.13.2 Plastic retaining clip 095.42
Technical data
Rated values 10 A - 250 V *
Dielectric strength 6 kV (1.2/50 μs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70
95.15.2

Approvals * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).
(1)
(according to type): With the relay 41.81 the NO change-over contact will be 11-14.

41.31 41.52 41.81 - 9024

13
7.5
3.5
30
20

3.5

41.61 41.81 - 8240

1.5

95.13.2 95.15.2
Copper side view Copper side view

Packaging codes
How to code and identify retaining clip and packaging options for sockets.

Example:

9 5 . 1 3 . 2 S L A
A Standard packaging

SL Plastic retaining clip

9 5 . 1 3 . 2 Without retaining clip

X-2013, www.findernet.com

9
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 43
SERIES

43 Series - Low profile PCB relays 10 - 16 A

Features 43.41 43.41-0300 43.61-0300
1 Pole - Low profile (15.4 mm height)
43.41 - 1 Pole, 10 A (3.2 mm pin pitch)

Plug-in / PCB Relays

43.41-0300 - 1 Pole NO, 10 A (5 mm pin pitch)
43.61-0300 - 1 Pole NO, 16 A (5 mm pin pitch)
PCB mount - direct or via PCB socket (43.41 version)
• Sensitive DC coil:
- 250 mW (10 A version)
- 400 mW (16 A version)
• Very high coil-contact isolation 10 mm,
6 kV (1.2/50 µs) • 3.2 mm contact pin pitch • 5 mm contact pin pitch • 5 mm contact pin pitch
• Cadmium Free contacts (preferred version) • 1 Pole CO, 10 A • 1 Pole NO, 10 A • 1 Pole NO, 16 A
• PCB direct or via socket • PCB mount • PCB mount
• Flux proof: RT II standard, (RT III option)

43.41

43.41-0300
43.61-0300

FOR UL RATINGS SEE: Copper side view Copper side view Copper side view
“General technical information” page V
Contact specification
Contact configuration 1 CO (SPDT) 1 NO (SPST-NO) 1 NO (SPST-NO)
Rated current/Maximum peak current A 10/15 10/15 16/25
Rated voltage/Maximum switching voltage V AC 250/400 250/400 250/400
Rated load AC1 VA 2,500 2,500 4,000
Rated load AC15 (230 V AC) VA 500 500 750
Single phase motor rating (230 V AC) kW — — —
Breaking capacity DC1: 30/110/220 V A 10/0.3/0.12 10/0.3/0.12 16/0.3/0.12
Minimum switching load mW (V/mA) 300 (5/5) 300 (5/5) 300 (5/5)
Standard contact material AgNi AgNi AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) — — —
V DC 3 - 6 - 9 - 12 - 18 - 24 - 36 - 48 3 - 6 - 9 - 12 - 18 - 24 - 36 - 48 12 - 24 - 48
Rated power AC/DC VA (50 Hz)/W —/0.25 —/0.25 —/0.4
Operating range AC — — —
DC (0.7…1.5)UN (0.7…1.5)UN (0.7…1.2)UN
Holding voltage AC/DC —/0.4 UN —/0.4 UN —/0.4 UN
Must drop-out voltage AC/DC —/0.05 UN —/0.05 UN —/0.05 UN
Technical data
Mechanical life AC/DC cycles —/10 · 106 —/10 · 106 —/10 · 106
Electrical life at rated load AC1 cycles 100 · 103 100 · 103 50 · 103
Operate/release time ms 6/4 6/2 6/2
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 6 (10 mm) 6 (10 mm) 6 (10 mm)
Dielectric strength between open contacts V AC 1,000 1,000 1,000
Ambient temperature range °C –40…+85 –40…+85 –40…+85
Environmental protection RT II RT II RT II
Approvals (according to type)
1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 43
SERIES

43 Series - Low profile PCB relays 10 - 16 A

Ordering information
Example: 43 series low-profile PCB relay, 1 CO (SPDT), 24 V DC coil.
Plug-in / PCB Relays

A B C D

4 3 . 4 1 . 7 . 0 2 4 . 2 0 0 0
Series A: Contact material D: Special versions
Type 0 = AgNi 0 = Flux proof (RT II)
4 = PCB - 3.2 mm pinning 2 = AgCdO 1 = Wash tight (RT III)
(CO/SPDT, 10 A) 4 = AgSnO2 C: Options
PCB - 5 mm pinning 5 = AgNi + Au 0 = None
(NO/SPST-NO, 10 A) B: Contact circuit
6 = PCB - 5 mm pinning 0 = CO (SPDT) - (for 43.41 only)
(NO/SPST-NO, 16 A) 3 = NO (SPST)
No. of poles
1 = 1 pole
Coil version
7 = Sensitive DC (only for 43.41)
Selecting features and options: only combinations in the same row are possible.
9 = DC (only for 43.61)
Preferred selections for best availability are shown in bold.
Coil voltage
See coil specifications Type Coil version A B C D
43.41 sensitive DC 0-2-4-5 0-3 0 0-1
43.61 DC 0-2-4 3 0 0

Technical data
Insulation according to EN 61810-1
Nominal voltage of supply system V AC 230/400
Rated insulation voltage V AC 250 400
Pollution degree 3 2
Insulation between coil and contact set
Type of insulation Reinforced (10 mm)
Overvoltage category III
Rated impulse voltage kV (1.2/50 µs) 6
Dielectric strength V AC 4,000
Insulation between open contacts
Type of disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 µs) 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 µs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 3/6
Vibration resistance (5…55)Hz: NO/NC g 15/3
Shock resistance g 15
Power lost to the environment without contact current W 0.25 (43.41) 0.4 (43.61)
with rated current W 1.3 (43.41) 2 (43.61)
Recommended distance between relays mounted on PCB mm ≥ 5
X-2013, www.findernet.com

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 43
SERIES

43 Series - Low profile PCB relays 10 - 16 A

Contact specification
F 43 - Electrical life (AC) v contact current H 43 - Maximum DC1 breaking capacity

Plug-in / PCB Relays

43.61 current limit
43.41 current limit

DC breaking current (A)

Resistive load - cosϕ = 1
Inductive load - cosϕ = 0.4
Cycles

limit for 43.41

DC voltage (V)

• When switching a resistive load (DC1) having voltage and current

values under the curve, an electrical life of ≥ 100·103 for 43.41 and
≥ 50·103 for 43.61 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
DC coil data - 0.25 W sensitive (type 43.41) R 43 - DC coil operating range v ambient temperature
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
3 7.003 2.2 4.5 36 83.5
6 7.006 4.2 9 150 40
9 7.009 6.5 13.5 324 27.7
12 7.012 8.4 18 580 20.7
18 7.018 13 27 1,300 13.8
24 7.024 16.8 36 2,200 10.9
36 7.036 25.2 54 5,200 6.9
48 7.048 33.6 72 9,200 5.2
1 - Max. permitted coil voltage.
2 - Min. pick-up voltage with coil at ambient temperature.
DC coil data - 0.4 W standard (type 43.61)
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
12 9.012 8.4 14.4 360 33.3
24 9.024 16.8 28.8 1,400 17.1
48 9.048 33.6 57.6 5,760 8.3
X-2013, www.findernet.com

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 43
SERIES

95 Series - Sockets and accessories for 43 series relays

PCB socket (for changeover contacts only) 95.23 (blue) 95.23.0 (black)
For relay type 43.41 43.41
Accessories
Plug-in / PCB Relays

95.23 Metal retaining clip (supplied with socket - packaging code SNA) 095.43
Approvals Technical data
(according to type): Rated values 10 A - 250 V
Insulation 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70

43.41

Copper side view

Packaging codes
How to code and identify retaining clip and packaging options for sockets.

Example:

9 5 . 2 3 S N A

A Standard packaging
X-2013, www.findernet.com

SN Metal retaining clip

9 5 . 2 3 Without retaining clip

4
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

44 Series - Miniature PCB relays 6 - 10 A

Features 44.52 44.62
2 Pole relay range
44.52 - 2 Pole 6 A (5 mm pin pitch)

Plug-in / PCB Relays

44.62 - 2 Pole 10 A (5 mm pin pitch)
PCB mount - direct or via PCB socket
35 mm rail mount - via screw and screwless sockets
• High physical separation between adjacent
contacts
• DC coils (Standard or sensitive)
• Cadmium Free contact materials
• 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts • 2 Pole, 6 A • 2 Pole, 10 A
• UL Listing (certain relay/socket combinations) • 5 mm contact pin pitch • 5 mm contact pin pitch
• PCB or 95 series sockets • PCB or 95 series sockets
• Flux proof: RT II
• 95 series sockets
• Coil EMC suppression
• Timer accessories 86 series

29 12.4
25

0.4 1
5

FOR UL RATINGS SEE: Copper side view Copper side view

“General technical information” page V
Contact specification
Contact configuration 2 CO (DPDT) 2 CO (DPDT)
Rated current/Maximum peak current A 6/10 10/20
Rated voltage/Maximum switching voltage V AC 250/400 250/400
Rated load AC1 VA 1,500 2,500
Rated load AC15 (230 V AC) VA 250 500
Single phase motor rating (230 V AC) kW 0.185 0.37
Breaking capacity DC1: 30/110/220 V A 6/0.3/0.13 10/0.3/0.13
Minimum switching load mW (V/mA) 300 (5/5) 300 (5/5)
Standard contact material AgNi AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) — —
V DC 6 - 9 - 12 - 14 - 24 - 28 - 48 - 60 - 110 - 125
Rated power AC/DC/sens. DC VA (50 Hz)/W/W —/0.65/0.5 —/0.65/0.5
Operating range AC — —
DC/sens. DC (0.73…1.5)UN/(0.73…1.7)UN (0.73…1.5)UN/(0.8…1.7)UN
Holding voltage AC/DC —/0.4 UN —/0.4 UN
Must drop-out voltage AC/DC —/0.1 UN —/0.1 UN
Technical data
Mechanical life AC/DC cycles —/20 · 106 —/20 · 106
Electrical life at rated load AC1 cycles 150 · 103 100 · 103
Operate/release time ms 8/5 - (12/5 sensitive) 8/5 - (12/5 sensitive)
X-2013, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 6 (8 mm) 6 (8 mm)

Dielectric strength between open contacts V AC 1,000 1,000
Ambient temperature range °C –40…+85 –40…+85
Environmental protection RT II RT II
Approvals (according to type)
1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

44 Series - Miniature PCB relays 6 - 10 A

Ordering information
Example: 44 series PCB relay, 2 CO (DPDT) 10 A contacts, 24 V DC coil.

A B C D
Plug-in / PCB Relays

4 4 . 6 2 . 9 . 0 2 4 . 0 0 0 0
Series A: Contact material D: Special versions
Type 0 = Standard AgNi 0 = Flux proof (RT II)
5 = PCB - 5 mm pinning 4 = AgSnO2 C: Options
6 = PCB - 5 mm pinning for 44.62 only 0 = None
5 = AgNi + Au
No. of poles for 44.52 only
2 = 2 pole for
44.52, 6 A B: Contact circuit
44.62, 10 A 0 = CO (DPDT)
Coil version
7 = Sensitive DC
9 = DC
Coil voltage
See coil specifications
Selecting features and options: only combinations in the same row are possible.
Preferred selections for best availability are shown in bold.
Type Coil version A B C D
44.52 DC - sens. DC 0-5 0 0 0
44.62 DC - sens. DC 0-4 0 0 0

Technical data
Insulation according to EN 61810-1
Nominal voltage of supply system V AC 230/400
Rated insulation voltage V AC 250 400
Pollution degree 3 2
Insulation between coil and contact set
Type of Insulation Reinforced (8 mm)
Overvoltage category III
Rated impulse voltage kV (1.2/50 µs) 6
Dielectric strength V AC 4,000
Insulation between adjacent contacts
Type of insulation Basic
Overvoltage category III
Rated impulse voltage kV (1.2/50 µs) 4
Dielectric strength V AC 2,500
Insulation between open contacts
Type of disconnection Micro-disconnection
Dielectric strength V AC/kV (1.2/50 µs) 1,000/1.5
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 µs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data
Bounce time: NO/NC ms 4/4
Vibration resistance (5…55)Hz: NO/NC g 15/12
Shock resistance g 16
Power lost to the environment without contact current W 0.6
with rated current W 1.2 (44.52) 2.7 (44.62)
X-2013, www.findernet.com

Recommended distance between relays mounted on PCB mm ≥5

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

44 Series - Miniature PCB relays 6 - 10 A

Contact specification
F 44 - Electrical life (AC) v contact current H 44 - Maximum DC1 breaking capacity

Plug-in / PCB Relays

44.62 current limit

DC breaking current (A)

44.52 current limit
Cycles

Resistive load - cosϕ = 1 2 contacts in series

Inductive load - cosϕ = 0.4

single contact
limit for 44.52

DC voltage (V)

• When switching a resistive load (DC1) having voltage and current

values under the curve, an electrical life of ≥ 100·103 can be expected.
• In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
DC coil data - 0.65 W standard DC coil data - 0.5 W sensitive
Nominal Coil Operating range Resistance Rated coil Nominal Coil Operating range Resistance Rated coil
voltage code consumption voltage code consumption
UN Umin Umax R I at UN UN Umin* Umax R I at UN
V V V Ω mA V V V Ω mA
6 9.006 4.4 9 55 109 6 7.006 4.4 10.2 75 80
9 9.009 6.6 13.5 125 72 9 7.009 6.6 15.3 160 56
12 9.012 8.8 18 220 55 12 7.012 8.8 20.4 300 40
14 9.014 10.2 21 300 47 14 7.014 10.2 23.8 400 35
24 9.024 17.5 36 900 27 24 7.024 17.5 40.8 1,200 20
28 9.028 20.5 42 1,200 23 28 7.028 20.5 47.6 1,600 17.5
48 9.048 35 72 3,500 14 48 7.048 35 81.6 4,800 10
60 9.060 43.8 90 5,500 11 60 7.060 43.8 102 7,200 8.4
110 9.110 80.3 165 18,000 6.2 110 7.110 80.3 187 23,500 4.7
125 9.125 91.2 188 23,500 5.3 125 7.125 100 219 32,000 3.9
*Umin = 0.8 UN for 44.62

R 44 - DC coil operating range v ambient temperature R 44 - DC coil operating range v ambient temperature
Standard coil Sensitive coil
X-2013, www.findernet.com

1 - Max. permitted coil voltage. 1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature. 2 - Min. pick-up voltage with coil at ambient temperature.

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Socket overview for 44 series relays

Module Socket Relay Description Mounting Accessories

99.02 95.05 44.52 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC
44.62 - Top terminals - Contacts (EN 60715) mount suppression modules
Plug-in / PCB Relays

- Bottom terminals - Coil - Jumper link

95.05 - Timer modules
See page 5 - Plastic retaining and release
clip

Module Socket Relay Description Mounting Accessories

99.80 95.85.3 44.52 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC
44.62 (EN 60715) mount suppression modules
- Plastic retaining and release
clip

95.85.3
See page 6

Module Socket Relay Description Mounting Accessories

99.80 95.95.3 44.52 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and EMC
44.62 - Top terminals - Contacts (EN 60715) mount suppression modules
- Bottom terminals - Coil - Plastic retaining and release
clip

95.95.3
See page 7

Module Socket Relay Description Mounting Accessories

99.02 95.55 44.52 Screwless terminal socket Panel or 35 mm rail - Coil indication and EMC
44.62 - For fast cable connections (EN 60715) mount suppression modules
- Top terminals - Contacts - Timer modules
- Bottom terminals - Coil - Plastic retaining and release
clip
95.55
See page 8

Module Socket Relay Description Mounting Accessories

99.80 95.55.3 44.52 Screwless terminal socket Panel or 35 mm rail - Coil indication and EMC
44.62 - For fast cable connections (EN 60715) mount suppression modules
- Top terminals - Contacts - Plastic retaining and release
- Bottom terminals - Coil clip

95.55.3
See page 9

Module Socket Relay Description Mounting Accessories

— 95.65 44.52 Screw terminal (Box clamp) socket Panel or 35 mm rail - Metal retaining clip
44.62 (EN 60715) mount

95.65
See page 10

Module Socket Relay Description Mounting Accessories

— 95.15.2 44.52 PCB socket PCB mounting - Metal retaining clip
95.15.2 44.62
See page 11 Top
terminals
X-2013, www.findernet.com

Bottom
terminals
4
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Sockets and accessories for 44 series relays

Screw terminal (Box clamp) socket panel or 35 mm rail mount 95.05 (blue) 95.05.0 (black)
For relay type 44.52, 44.62
Accessories

Plug-in / PCB Relays

Metal retaining clip 095.71
95.05 Plastic retaining and release clip 095.01 095.01.0
(supplied with socket - packaging code SPA)
Approvals
(according to type): 8-way jumper link 095.18 095.18.0
Identification tag 095.00.4
Modules (see table below) 99.02
Timer modules (see table below) 86.30
Sheet of marker tags for retaining and release clip 095.01 060.72
Certain relay/socket plastic, 72 tags, 6x12 mm
combinations
Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70 (see diagram L95)
095.01 Screw torque Nm 0.5
Wire strip length mm 8
Max. wire size for 95.05 socket solid wire stranded wire
mm2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14

L 95 - Total socket current vs ambient temperature

060.72
Total socket current (A)

PEAN
O
8-way jumper link for 95.05 socket 095.18 (blue) 095.18.0 (black)
EUR

T
N
T E
EUR

P A O Rated values 10 A - 250 V

PEAN

095.18

86 series timer modules

(12…24)V AC/DC; Bi-function: AI, DI; (0.05s…100h) 86.30.0.024.0000
Approvals (according to type):

86.30

99.02 coil indication and EMC suppression modules for 95.05 socket
Diode (+A1, standard polarity) (6...220)V DC 99.02.3.000.00
LED (6...24)V DC/AC 99.02.0.024.59
LED (28...60)V DC/AC 99.02.0.060.59
LED (110...240)V DC/AC 99.02.0.230.59
99.02 LED + Diode (+A1, standard polarity) (6...24)V DC 99.02.9.024.99
Approvals LED + Diode (+A1, standard polarity) (28...60)V DC 99.02.9.060.99
(according to type): LED + Diode (+A1, standard polarity) (110...220)V DC 99.02.9.220.99
LED + Varistor (6...24)V DC/AC 99.02.0.024.98
X-2013, www.findernet.com

LED + Varistor (28...60)V DC/AC 99.02.0.060.98

LED + Varistor (110...240)V DC/AC 99.02.0.230.98
RC circuit (6...24)V DC/AC 99.02.0.024.09
DC Modules with RC circuit (28...60)V DC/AC 99.02.0.060.09
non-standard polarity RC circuit (110...240)V DC/AC 99.02.0.230.09
(+A2) on request. Residual current by-pass (110...240)V AC 99.02.8.230.07

5
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Sockets and accessories for 44 series relays

Screw terminal (Box clamp) socket panel or 35 mm rail mount 95.85.3 (blue) 95.85.30 (black)
For relay type 44.52, 44.62
Accessories
Plug-in / PCB Relays

Metal retaining clip 095.71

Plastic retaining and release clip 095.91.3 095.91.30
95.85.3 (supplied with socket - packaging code SPA)
8-way jumper link 095.08 095.08.0
Approvals
(according to type): Identification tag 095.80.3
Modules (see table below) 99.80
Sheet of marker tags for retaining and release clip 095.91.3 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
095.91.3 Ambient temperature °C –40…+70 (see diagram L95)
Screw torque Nm 0.5
Wire strip length mm 7
Max. wire size for 95.85.3 sockets solid wire stranded wire
mm2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14

060.72

L 95 - Total socket current vs ambient temperature

Total socket current (A)

PEAN
O
8-way jumper link for 95.85.3 socket 095.08 (blue) 095.08.0 (black)
EUR

T
N
T E
EUR

P A
PEAN
O
Rated values 10 A - 250 V

095.08

99.80 coil indication and EMC suppression modules for 95.85.3 socket
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.80.3.000.00
LED (6...24)V DC/AC 99.80.0.024.59
LED (28...60)V DC/AC 99.80.0.060.59
99.80
LED (110...240)V DC/AC 99.80.0.230.59
Approvals
(according to type): LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99
LED + Varistor (6...24)V DC/AC 99.80.0.024.98
* Modules in Black LED + Varistor (28...60)V DC/AC 99.80.0.060.98
X-2013, www.findernet.com

housing are LED + Varistor (110...240)V DC/AC 99.80.0.230.98

available on request.
RC circuit (6...24)V DC/AC 99.80.0.024.09
Green LED is standard. RC circuit (28...60)V DC/AC 99.80.0.060.09
Red LED available RC circuit (110...240)V DC/AC 99.80.0.230.09
on request.
Residual current by-pass (110...240)V AC 99.80.8.230.07
6
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Sockets and accessories for 44 series relays

Screw terminal (Box clamp) socket panel or 35 mm rail mount 95.95.3 (blue) 95.95.30 (black)
For relay type 44.52, 44.62
Accessories

Plug-in / PCB Relays

Metal retaining clip 095.71
Plastic retaining and release clip 095.91.3 095.91.30
(supplied with socket - packaging code SPA)
95.95.3
8-way jumper link 095.08 095.08.0
Approvals Identification tag 095.80.3
(according to type):
Modules (see table below) 99.80
Sheet of marker tags for retaining and release clip 095.91.3 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
095.91.3 Ambient temperature °C –40…+70 (see diagram L95)
Screw torque Nm 0.5
Wire strip length mm 8
Max. wire size for 95.95.3 sockets solid wire stranded wire
m2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14

060.72

L 95 - Total socket current vs ambient temperature

Total socket current (A)

PEAN
O
EUR

T E
N
T
8-way jumper link for 95.95.3 socket 095.08 (blue) 095.08.0 (black)
EUR

P A
Rated values 10 A - 250 V
O
PEAN

095.08

99.80 coil indication and EMC suppression modules for 95.95.3 socket
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.80.3.000.00
LED (6...24)V DC/AC 99.80.0.024.59
LED (28...60)V DC/AC 99.80.0.060.59
99.80
LED (110...240)V DC/AC 99.80.0.230.59
Approvals
(according to type): LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99
LED + Varistor (6...24)V DC/AC 99.80.0.024.98
* Modules in Black LED + Varistor (28...60)V DC/AC 99.80.0.060.98
X-2013, www.findernet.com

housing are LED + Varistor (110...240)V DC/AC 99.80.0.230.98

available on request.
RC circuit (6...24)V DC/AC 99.80.0.024.09
Green LED is standard. RC circuit (28...60)V DC/AC 99.80.0.060.09
Red LED available RC circuit (110...240)V DC/AC 99.80.0.230.09
on request.
Residual current by-pass (110...240)V AC 99.80.8.230.07
7
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Sockets and accessories for 44 series relays

Screwless terminal socket panel or 35 mm rail mount 95.55 (blue) 95.55.0 (black)
For relay type 44.52, 44.62
Accessories
Plug-in / PCB Relays

Metal retaining clip 095.71

Plastic retaining and release clip 095.91.3
(supplied with socket - packaging code SPA)
95.55 Modules (see table below) 99.02
Approvals Timer modules (see table below) 86.30
(according to type): Sheet of marker tags for retaining and release clip 095.91.3 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –25…+70 (see diagram L95)
095.91.3 Wire strip length mm 8
Max. wire size for 95.55 socket solid wire stranded wire
mm2 2x(0.2...1.5) 2x(0.2...1.5)
AWG 2x(24...18) 2x(24...18)

060.72

L 95 - Total socket current vs ambient temperature

Total socket current (A)

86 series timer modules

(12…24)V AC/DC; Bi-function: AI, DI; (0.05s…100h) 86.30.0.024.0000
Approvals
(according to type):

86.30

99.02 coil indication and EMC suppression modules for 95.55 socket
Diode (+A1, standard polarity) (6...220)V DC 99.02.3.000.00
LED (6...24)V DC/AC 99.02.0.024.59
LED (28...60)V DC/AC 99.02.0.060.59
LED (110...240)V DC/AC 99.02.0.230.59
99.02 LED + Diode (+A1, standard polarity) (6...24)V DC 99.02.9.024.99
Approvals LED + Diode (+A1, standard polarity) (28...60)V DC 99.02.9.060.99
(according to type): LED + Diode (+A1, standard polarity) (110...220)V DC 99.02.9.220.99
LED + Varistor (6...24)V DC/AC 99.02.0.024.98
LED + Varistor (28...60)V DC/AC 99.02.0.060.98
X-2013, www.findernet.com

LED + Varistor (110...240)V DC/AC 99.02.0.230.98

RC circuit (6...24)V DC/AC 99.02.0.024.09
DC Modules with RC circuit (28...60)V DC/AC 99.02.0.060.09
non-standard polarity RC circuit (110...240)V DC/AC 99.02.0.230.09
(+A2) on request. Residual current by-pass (110...240)V AC 99.02.8.230.07

8
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Sockets and accessories for 44 series relays

Screwless terminal socket panel or 35 mm rail mount 95.55.3 (blue) 95.55.30 (black)
For relay type 44.52, 44.62
Accessories

Plug-in / PCB Relays

Metal retaining clip 095.71
Plastic retaining and release clip 095.91.3
(supplied with socket - packaging code SPA)
95.55.3
Modules (see table below) 99.80
Approvals
(according to type): Sheet of marker tags for retaining and release clip 095.91.3 060.72
plastic, 72 tags, 6x12 mm
Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –25…+70 (see diagram L95)
Wire strip length mm 8
095.91.3 Max. wire size for 95.55.3 socket solid wire stranded wire
mm2 2x(0.2...1.5) 2x(0.2...1.5)
AWG 2x(24...18) 2x(24...18)

73.7

24.6 4 4

060.72
21 COM 11

30. 6
L 95 - Total socket current vs ambient temperature 24 NO 14

22 NC 12
Total socket current (A)

95. 6

Ø 3.2 34.7
37. 2

30.3

A2 COIL A1

15.8 22.6
32.5

99.80 coil indication and EMC suppression modules for 95.55.3 socket
Blue*
Diode (+A1, standard polarity) (6...220)V DC 99.80.3.000.00
LED (6...24)V DC/AC 99.80.0.024.59
LED (28...60)V DC/AC 99.80.0.060.59
99.80
LED (110...240)V DC/AC 99.80.0.230.59
Approvals
(according to type): LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99
LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99
LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99
* Modules in Black LED + Varistor (6...24)V DC/AC 99.80.0.024.98
housing are LED + Varistor (28...60)V DC/AC 99.80.0.060.98
available on request.
LED + Varistor (110...240)V DC/AC 99.80.0.230.98
Green LED is standard. RC circuit (6...24)V DC/AC 99.80.0.024.09
Red LED available RC circuit (28...60)V DC/AC 99.80.0.060.09
on request. RC circuit (110...240)V DC/AC 99.80.0.230.09
Residual current by-pass (110...240)V AC 99.80.8.230.07
X-2013, www.findernet.com

9
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Sockets and accessories for 44 series relays

Screw terminal (Box clamp) socket panel or 35 mm rail mount 95.65 (blue)
For relay type 44.52, 44.62
Accessories
Plug-in / PCB Relays

Metal retaining clip 095.71

95.65 8-way jumper link 095.08
Modules —
Approvals
(according to type): Technical data
Rated values 10 A - 250 V
Dielectric strength (between coil and contacts) 2 kV AC
Protection category IP 20
Ambient temperature °C –40…+70 (see diagram L95)
Screw torque Nm 0.5
Wire strip length mm 7
Max. wire size for 95.65 sockets solid wire stranded wire
m2 1x6 / 2x2.5 1x4 / 2x2.5
AWG 1x10 / 2x14 1x12 / 2x14

L 95 - Total socket current vs ambient temperature

Total socket current (A)

95.65

PEAN
O
8-way jumper link for 95.65 sockets 095.08 (blue)
EUR

T
N
T E
EUR

P A
PEAN
O
Rated values 10 A - 250 V

095.08

X-2013, www.findernet.com

10
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 44
SERIES

95 Series - Sockets and accessories for 44 series relays

PCB socket 95.15.2 (blue) 95.15.20 (black)

For relay type 44.52, 44.62
Accessories

Plug-in / PCB Relays

95.15.2 Metal retaining clip (supplied with socket - packaging code SMA) 095.51
Approvals Plastic retaining clip 095.52
(according to type): Technical data
Rated values 10 A - 250 V
Dielectric strength 6 kV (1.2/50 µs) between coil and contacts
Protection category IP 20
Ambient temperature °C –40…+70

Copper side view

Packaging codes
How to code and identify retaining clip and packaging options for sockets.

Example:

9 5 . 0 5 S P A

A Standard packaging

SM Metal retaining clip

X-2013, www.findernet.com

SP Plastic retaining clip

9 5 . 0 5 Without retaining clip

11
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 45 Series - Miniature PCB relays 16 A
Features 45.31 45.71 45.91
Relay for +105 °C ambient use
PCB mount - direct for coil and contact terminals
- 45.31, 1 Pole normally open
(≥ 3 mm contact gap)
Relays for +125 °C ambient use
PCB mount - Faston 250 contact connections
- 45.71, 1 Pole normally open or normally closed
- 45.91, 1 Pole normally open
(≥ 3 mm contact gap)
• Contact gap ≥ 3 mm according to •1 NO (SPST-NO), •1 NO or 1 NC •1 NO (SPST-NO),
EN 60730-1 (45.31 and 45.91 type) ≥ 3 mm gap (SPST-NO or SPST-NC) ≥ 3 mm gap
• Sensitive DC coil - 360 mW • Max ambient temperature • Max ambient temperature • Max ambient temperature

• Cadmium Free option available +105°C +125°C +125°C

• PCB mounting • PCB mounting + Faston 250 • PCB mounting + Faston 250
• Reinforced insulation between coil and
contacts according to EN 60335-1
(VDE 0700), with safe separation and 8 mm
clearance and creepage distance
• 6 kV (1.2/50 µs) isolation, coil-contacts
• Flux proof: RT II standard, (RT III option) 45.71...0310
(1 NO) / (SPST-NO)

45.31...0310 45.91...0310
(1 NO / SPST-NO) (1 NO / SPST-NO)

45.71...0410
(1 NC) / (SPST-NC)

For outline drawing see page 3

FOR UL RATINGS SEE:

“General technical information” page V Copper side view Copper side view Copper side view
Contact specification
Contact configuration 1NO (SPST-NO) ≥ 3 mm gap 1NO or 1NC (SPST-NO or SPST-NC) 1NO (SPST-NO) ≥ 3 mm gap
Rated current/Maximum peak current A 16/30 16/30 16/30
Rated voltage/Maximum switching voltage V AC 250/400 250/400 250/400
Rated load AC1 VA 4,000 4,000 4,000
Rated load AC15 (230 V AC) VA 750 750 750
Single phase motor rating (230 V AC) kW 0.55 0.55 0.55
Breaking capacity DC1: 30/110/220 V A 16/4/1 16/0.3/0.13 16/4/1
Minimum switching load mW (V/mA) 500 (10/5) 500 (10/5) 500 (10/5)
Standard contact material AgNi AgCdO AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) — — —
V DC 6 - 12 - 24 - 48 - 60 6 - 12 - 24 - 48 - 60 6 - 12 - 24 - 48 - 60
Rated power AC/DC VA (50 Hz)/W —/0.36 —/0.36 —/0.36
Operating range AC — — —
DC (0.7…1.2)UN (0.7…1.2)UN (0.7…1.2)UN
Holding voltage AC/DC —/0.4 UN —/0.4 UN —/0.4 UN
Must drop-out voltage AC/DC —/0.1 UN —/0.1 UN —/0.1 UN
Technical data
Mechanical life AC/DC cycles —/10 · 106 —/10 · 106 —/10 · 106
3
Electrical life at rated load AC1 cycles 30 · 10 100 · 10 3
30 · 103
Operate/release time ms 12/2 10/2 12/2
IV-2012, www.findernet.com

Insulation between coil and contacts (1.2/50 µs) kV 6 (8 mm) 6 (8 mm) 6 (8 mm)
Dielectric strength between open contacts V AC 2,500 1,000 2,500
Ambient temperature range °C –40…+105 –40…+125 –40…+125
Environmental protection RT II RT II RT II
Approvals (according to type)

1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 45 Series - Miniature PCB relays 16 A
Ordering information
Example: 45 series for PCB relay + Faston 250, 1 NO (SPST-NO), 12 V DC coil.

A B C D

4 5 . 7 1 . 7 . 0 1 2 . 0 3 1 0
Series A: Contact material D: Special versions
Type 0 = Standard AgCdO 0 = Flux proof (RT II)
3 = PCB mount, ≥ 3 mm contact gap for 45.71, 1 = Wash tight (RT III) 45.71 and 45.91 only
7 = PCB + Faston 250 mount Standard AgNi C: Options
9 = PCB + Faston 250 mount, for 45.31 and 1 = None
≥ 3 mm contact gap 45.91
1 = AgNi
No. of poles 2 = AgCdO
1 = 1 pole, 16 A
B: Contact circuit
Coil version
3 = NO (SPST)
7 = Sensitive DC
4 = NC (SPST) 45.71 only
Coil voltage
See coil specifications

Selecting features and options: only combinations in the same row are possible.
Type Coil version A B C D
45.31 sensitive DC 0 - 2 3 1 0
45.71 sensitive DC 0 - 1 3-4 1 0-1
45.91 sensitive DC 0 - 2 3 1 0-1

Technical data
Insulation according to EN 61810-1
45.71 45.31 / 45.91
Nominal voltage of supply system V AC 230/400 230/400
Rated insulation voltage V AC 250 400 250 400
Pollution degree 3 2 3 2
Insulation between coil and contact set
Type of insulation Reinforced (8 mm) Reinforced (8 mm)
Overvoltage category III III
Rated impulse voltage kV (1.2/50 µs) 6 6
Dielectric strength V AC 4,000 4,000
Insulation between open contacts
Type of disconnection Micro-disconnection Full-disconnection
Overvoltage category — III
Rated impulse voltage kV (1.2/50 µs) — 4
Dielectric strength V AC/kV (1.2/50 µs) 1,000/1.5 2,500/4
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 µs) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV)
Other data 45.71 45.31 / 45.91
Bounce time: NO/NC ms 3/3 2/—
Vibration resistance (10…150)Hz: NO/NC g 20/10 20/—
Shock resistance g 20
Power lost to the environment without contact current W 0.4
with rated current W 1.8
Recommended distance between relays mounted on PCB mm ≥5
IV-2012, www.findernet.com

2
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
 45 Series - Miniature PCB relays 16 A
Contact specification
F 45 - Electrical life (AC) v contact current F 45 - Electrical life (AC) v contact current
Type 45.71 Type 45.31 / 45.91

Resistive load - cosϕ = 1

Resistive load - cosϕ = 1

Inductive load - cosϕ = 0.4
Cycles

Cycles
H 45 - Maximum DC1 breaking capacity
• When switching a resistive load (DC1) having voltage and current
values under the curve, an electrical life of ≥ 100·103 cycles (45.71) and
≥ 30·103 cycles (45.31, 45.91) can be expected.
DC breaking current (A)

• In the case of DC13 loads, the connection of a diode in parallel with

the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

DC voltage (V)

Coil specifications
DC coil data - 0.36 W sensitive R 45 - DC coil operating range v ambient temperature
Nominal Coil Operating range Resistance Rated coil
voltage code consumption
UN Umin Umax R I at UN
V V V Ω mA
6 7.006 4.2 7.2 100 60
12 7.012 8.4 14.4 400 30
24 7.024 16.8 28.8 1,600 15 limit for 45.31
48 7.048 33.6 57.6 6,400 7.5
60 7.060 42 72 10,000 6

1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature.

Outline drawings
Type 45.31 Type 45.71 / 91
IV-2012, www.findernet.com

3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com