BCP56T Series: 1. Product Profile

BCP56T series
80 V, 1 A NPN medium power transistors

Rev. 1 — 5 July 2016 Product data sheet
1. Product profile
1.1 General description

NPN medium power transistors in a medium power SOT223 (SC-73) Surface-Mounted
Device (SMD) plastic package.
Table 1. Product overview

Type number Package PNP complement
Nexperia JEITA JEDEC
BCP56T SOT223 SC-73 - BCP53T
BCP56-10T BCP53-10T
BCP56-16T BCP53-16T
1.2 Features and benefits

 High collector current capability IC and ICM
 Three current gain selections
 High power dissipation capability
 AEC-Q101 qualified
1.3 Applications
 Linear voltage regulators
 MOSFET drivers
 Low-side switches
 Power management
 Amplifiers
1.4 Quick reference data

Table 2. Quick reference data
Tamb = 25 C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
VCEO collector-emitter voltage open base - - 80 V
IC collector current - - 1 A
ICM peak collector current single pulse; tp  1 ms - - 2 A
Nexperia BCP56T series
Table 2. Quick reference data …continued

hFE DC current gain VCE = 2 V; IC = 150 mA [1] 63 - 250
BCP56-10T VCE = 2 V; IC = 150 mA [1] 63 - 160
BCP56-16T VCE = 2 V; IC = 150 mA [1] 100 - 250
[1] Pulse test: tp  300 s;  = 0.02
2. Pinning information
Table 3. Pinning
Pin Symbol Description Simplified outline Graphic symbol
1 B base
4 C
2 C collector
3 E emitter B
4 C collector
1 2 3 E
sym123
3. Ordering information
Table 4. Ordering information
Type number Package
Name Description Version
BCP56T SC-73 plastic surface-mounted package with increased SOT223
BCP56-10T heatsink; 4 leads
BCP56-16T
4. Marking
Table 5. Marking codes
Type number Marking code
BCP56T BCP56T
BCP56-10T P5610T
BCP56-16T P5616T
BCP56T_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
Product data sheet Rev. 1 — 5 July 2016 2 of 16

5. Limiting values
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VCBO collector-base voltage open emitter - 100 V
VCEO collector-emitter voltage open base - 80 V
VEBO emitter-base voltage open collector - 5 V
IC collector current - 1 A
ICM peak collector current single pulse; - 2 A
tp  1 ms
IB base current - 0.2 A
IBM peak base current single pulse; - 0.3 A
tp  1 ms
Ptot total power dissipation Tamb  25 C [1] - 0.6 W
[2] - 1 W
[3] - 1.3 W
[4] - 1.3 W
[5] - 1.8 W
Tj junction temperature - +150 C
Tamb ambient temperature 55 +150 C
Tstg storage temperature 65 +150 C
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated; mounting pad for collector 1 cm2.
[4] Device mounted on an FR4 PCB, 4-layer copper; tin-plated and standard footprint.
[5] Device mounted on an FR4 PCB, 4-layer copper; tin-plated; mounting pad for collector 1 cm2.

aaa-023487
2
Ptot
(1)
(W)
1.6
(2), (3)
1.2
(4)
0.8
(5)
0.4
0
-75 -25 25 75 125 175
Tamb (°C)
(1) FR4 PCB, 4-layer copper, 1 cm2

(2) FR4 PCB, single-sided copper, 6 cm2
(3) FR4 PCB, 4-layer copper, standard footprint
(4) FR4 PCB, single-sided copper, 1 cm2
(5) FR4 PCB, single-sided copper, standard footprint
Fig 1. Power derating curves
aaa-023510
10
IC
(A)
1 tp = 10 µs
100 µs
1 ms
10-1 10 ms
100 ms
DC
1s
DC; FR4 PCB, 4-layer copper;
10-2 collector mounting pad 1 cm2
10-3
10-1 1 10 102 103
VCE (V)
Unless otherwise specified:

Tamb = 25 C
Single pulse
FR4 PCB, single-sided copper; standard footprint
Fig 2. Safe operating area; junction to ambient; continuous and peak collector currents as a function of
collector-emitter voltage

6. Thermal characteristics
Table 7. Thermal characteristics
Rth(j-a) thermal resistance from junction to ambient in free air [1] - - 209 K/W
[2] - - 125 K/W
[3] - - 97 K/W
[4] - - 97 K/W
[5] - - 70 K/W
Rth(j-sp) thermal resistance from junction to solder point - - 18 K/W
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[4] Device mounted on an FR4 PCB, 4-layer copper; tin-plated and standard footprint.
[5] Device mounted on an FR4 PCB, 4-layer copper; tin-plated; mounting pad for collector 1 cm2.
aaa-023489
103
Zth(j-a)
(K/W)
duty cycle = 1
0.75
102 0.50
0.33
0.20
0.10
10 0.05
0.02
0.01
0
1
10-5 10-4 10-3 10-2 10-1 1 10 102 103
tp (s)
FR4 PCB, single-sided copper, tin-plated and standard footprint

Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values

aaa-023490
103
Zth(j-a)
(K/W)
duty cycle = 1
102 0.75
0.50
0.33
0.20
0.10
10
0.05
0.02
0.01
0
1
10-5 10-4 10-3 10-2 10-1 1 10 102 103
tp (s)
FR4 PCB, single-sided copper, tin-plated; mounting pad for collector 1 cm2
aaa-023491
102
duty cycle = 1
0.75
0.50
Zth(j-a)
(K/W) 0.33
0.20
10 0.10
0.05
0.02
0.01
0
1
10-5 10-4 10-3 10-2 10-1 1 10 102 103
tp (s)
FR4 PCB, single-sided copper, tin-plated; mounting pad for collector 6 cm2

aaa-023492
102
duty cycle = 1
0.75
Zth(j-a) 0.50
(K/W) 0.33
0.20
10 0.10
0.05
0.02
0.01
0
1
10-5 10-4 10-3 10-2 10-1 1 10 102 103
tp (s)
FR4 PCB, 4-layer copper, tin-plated and standard footprint.

aaa-023493
102
duty cycle = 1
0.75
Zth(j-a)
(K/W) 0.50
0.33
0.20
10
0.10
0.05
0.02
0.01
0
1
10-5 10-4 10-3 10-2 10-1 1 10 102 103
tp (s)
FR4 PCB, 4-layer copper, tin-plated; mounting pad for collector 1 cm2

7. Characteristics
Table 8. Characteristics
ICBO collector-base cut-off VCB = 30 V; IE = 0 A - - 100 nA
current VCB = 30 V; IE = 0 A; Tj = 150 C - - 10 A
IEBO emitter-base cut-off current VEB = 5 V; IC = 0 A - - 100 nA
hFE DC current gain VCE = 2 V; IC = 5 mA 63 - -
VCE = 2 V; IC = 150 mA [1] 63 - 250
VCE = 2 V; IC = 500 mA [1] 40 - -
BCP56-10T VCE = 2 V; IC = 150 mA [1] 63 - 160
BCP56-16T VCE = 2 V; IC = 150 mA [1] 100 - 250
VCEsat collector-emitter saturation IC = 500 mA; IB = 50 mA [1] - - 500 mV
voltage
VBE base-emitter voltage VCE = 2 V; IC = 500 mA [1] - - 1 V
fT transition frequency VCE = 5 V; IC = 50 mA; 100 155 - MHz
f = 100 MHz
Cc collector capacitance VCB = 10 V; IE = ie = 0 A; - 4.5 - pF
f = 1 MHz
[1] Pulse test: tp  300 s;  = 0.02

aaa-023511 aaa-023512
200 200
(1)
hFE hFE
150 150
(2)
100 100
(3)
(1)
50 50 (2)
(3)
0 0
10-1 1 10 102 103 104 10-1 1 10 102 103 104
IC (mA) IC (mA)
VCE = 2 V Tamb = 25 C
(1) Tamb = 100 C (1) VCE = 1 V
(2) Tamb = 25 C (2) VCE = 2 V
(3) Tamb = 55 C (3) VCE = 5 V
Fig 8. DC current gain as a function of collector Fig 9. DC current gain as a function of collector
current; typical values current; typical values
aaa-023513 aaa-023514
1 1.5
IB (mA) = 30 27
IC 24
(A) 21 VBE
18
0.8 (V)
15
12
1
0.6 9
(1)
6
(2)
0.4
3 (3)
0.5
0.2
0 0
0 1 2 3 4 5 10-1 1 10 102 103 104
VCE (V) IC (mA)
Tamb = 25 C VCE = 2 V
(1) Tamb = 55 C
(2) Tamb = 25 C
(3) Tamb = 100 C
Fig 10. Collector current as a function of Fig 11. Base-emitter voltage as a function of collector
collector-emitter voltage; typical values current; typical values

aaa-023515 aaa-023516
1.5 1
VBEsat
(V) VCESat
(V)
1
(1)
(1)
10-1 (2)
(2)
(3)
(3)
0.5
0 10-2
10-1 1 10 102 103 104 10-1 1 10 102 103 104
IC (mA) IC (mA)
IC/IB = 10 IC/IB = 10
(1) Tamb = 55 C (1) Tamb = 100 C
(2) Tamb = 25 C (2) Tamb = 25 C
(3) Tamb = 100 C (3) Tamb = 55 C
Fig 12. Base-emitter saturation voltage as a function Fig 13. Collector-emitter saturation voltage as a
of collector current; typical values function of collector current; typical values
aaa-023517 aaa-023518
1 16
CC
(pF)
VCESat
(V) 12
10-1 (1) 8
(2)
(3)
10-2 0
10-1 1 10 102 103 104 0 20 40 60 80 100
IC (mA) VCB (V)
Tamb = 25 C f = 1 MHz; Tamb = 25 C

(1) IC/IB = 50
(2) IC/IB = 20
(3) IC/IB = 5
Fig 14. Collector-emitter saturation voltage as a Fig 15. Collector capacitance as a function of
function of collector current; typical values collector-base voltage; typical values

aaa-023519 aaa-023520
100 103
CE
(pF)
80 fT
(MHz)
60
102
40
20
0 10
0 1 2 3 4 5 10-1 1 10 102 103
VEB (V) IC (mA)
f = 1 MHz; Tamb = 25 C VCE = 5 V;

f = 100 MHz; Tamb = 25 C
Fig 16. Emitter capacitance as a function of Fig 17. Transition frequency as a function of collector
emitter-base voltage; typical values current; typical values
8. Test information
8.1 Quality information

This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
9. Package outline
6.7
6.3 1.8
3.1 1.5
2.9
1.1
0.7
7.3 3.7
6.7 3.3
1 2 3
0.8 0.32
2.3 0.6 0.22
4.6
Dimensions in mm 04-11-10
Fig 18. Package outline SOT223 (SC-73)

10. Soldering
7
3.85
3.6
3.5
0.3
1.3 1.2
(4×) (4×)
4 solder lands
solder resist
3.9 6.1 7.65 solder paste
occupied area
1 2 3
Dimensions in mm
2.3 2.3
1.2
(3×)
1.3
(3×)
6.15 sot223_fr
Fig 19. Reflow soldering footprint SOT223 (SC-73)
8.9
6.7
1.9
4
solder lands
solder resist
6.2 8.7
occupied area
Dimensions in mm
1 2 3
preferred transport
1.9 direction during soldering
(3×)
2.7 2.7
1.9
1.1
(2×) sot223_fw
Fig 20. Wave soldering footprint SOT223 (SC-73)

11. Revision history

Table 9. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BCP56T_SER v.1 20160705 Product data sheet - -

12. Legal information
12.1 Data sheet status

Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
12.2 Definitions Suitability for use in automotive applications — This Nexperia

product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
Draft — The document is a draft version only. The content is still under
authorized or warranted to be suitable for use in life support, life-critical or
internal review and subject to formal approval, which may result in
safety-critical systems or equipment, nor in applications where failure or
modifications or additions. Nexperia does not give any
malfunction of a Nexperia product can reasonably be expected
representations or warranties as to the accuracy or completeness of
to result in personal injury, death or severe property or environmental
information included herein and shall have no liability for the consequences of
damage. Nexperia and its suppliers accept no liability for
use of such information.
inclusion and/or use of Nexperia products in such equipment or
Short data sheet — A short data sheet is an extract from a full data sheet applications and therefore such inclusion and/or use is at the customer's own
with the same product type number(s) and title. A short data sheet is intended risk.
for quick reference only and should not be relied upon to contain detailed and
Applications — Applications that are described herein for any of these
full information. For detailed and full information see the relevant full data
products are for illustrative purposes only. Nexperia makes no
sheet, which is available on request via the local Nexperia sales
representation or warranty that such applications will be suitable for the
office. In case of any inconsistency or conflict with the short data sheet, the
specified use without further testing or modification.
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
Product specification — The information and data provided in a Product and products using Nexperia products, and Nexperia
data sheet shall define the specification of the product as agreed between accepts no liability for any assistance with applications or customer product
Nexperia and its customer, unless Nexperia and design. It is customer’s sole responsibility to determine whether the Nexperia
customer have explicitly agreed otherwise in writing. In no event however, product is suitable and fit for the customer’s applications and
shall an agreement be valid in which the Nexperia product is products planned, as well as for the planned application and use of
deemed to offer functions and qualities beyond those described in the customer’s third party customer(s). Customers should provide appropriate
Product data sheet. design and operating safeguards to minimize the risks associated with their
applications and products.
12.3 Disclaimers Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
Limited warranty and liability — Information in this document is believed to
third party customer(s). Customer is responsible for doing all necessary
be accurate and reliable. However, Nexperia does not give any
testing for the customer’s applications and products using Nexperia
representations or warranties, expressed or implied, as to the accuracy or
products in order to avoid a default of the applications and
completeness of such information and shall have no liability for the
the products or of the application or use by customer’s third party
consequences of use of such information. Nexperia takes no
customer(s). Nexperia does not accept any liability in this respect.
responsibility for the content in this document if provided by an information
source outside of Nexperia. Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
In no event shall Nexperia be liable for any indirect, incidental,
damage to the device. Limiting values are stress ratings only and (proper)
punitive, special or consequential damages (including - without limitation - lost
operation of the device at these or any other conditions above those given in
profits, lost savings, business interruption, costs related to the removal or
the Recommended operating conditions section (if present) or the
replacement of any products or rework charges) whether or not such
Characteristics sections of this document is not warranted. Constant or
damages are based on tort (including negligence), warranty, breach of
repeated exposure to limiting values will permanently and irreversibly affect
contract or any other legal theory.
the quality and reliability of the device.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards Terms and conditions of commercial sale — Nexperia
customer for the products described herein shall be limited in accordance products are sold subject to the general terms and conditions of commercial
with the Terms and conditions of commercial sale of Nexperia. sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
Right to make changes — Nexperia reserves the right to make agreement is concluded only the terms and conditions of the respective
changes to information published in this document, including without agreement shall apply. Nexperia hereby expressly objects to
limitation specifications and product descriptions, at any time and without applying the customer’s general terms and conditions with regard to the
notice. This document supersedes and replaces all information supplied prior purchase of Nexperia products by customer.
to the publication hereof.

No offer to sell or license — Nothing in this document may be interpreted or Translations — A non-English (translated) version of a document is for
construed as an offer to sell products that is open for acceptance or the grant, reference only. The English version shall prevail in case of any discrepancy
conveyance or implication of any license under any copyrights, patents or between the translated and English versions.
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
12.4 Trademarks
authorization from competent authorities. Notice: All referenced brands, product names, service names and trademarks
Quick reference data — The Quick reference data is an extract of the are the property of their respective owners.
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13. Contact information

For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: [email protected]

14. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2
4 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Thermal characteristics . . . . . . . . . . . . . . . . . . 5
7 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8 Test information . . . . . . . . . . . . . . . . . . . . . . . . 11
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . 11
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11
10 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13
12 Legal information. . . . . . . . . . . . . . . . . . . . . . . 14
12.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 14
12.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
12.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
12.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13 Contact information. . . . . . . . . . . . . . . . . . . . . 15
14 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
© Nexperia B.V. 2017. All rights reserved

For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: [email protected]
Date of release: 05 July 2016

BCP56T Series: 1. Product Profile

Uploaded by

Copyright:

Available Formats

BCP56T Series: 1. Product Profile

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BCP56T Series: 1. Product Profile

Uploaded by

Copyright:

Available Formats

BCP56T series

80 V, 1 A NPN medium power transistors

1.1 General description

Table 1. Product overview

1.2 Features and benefits

1.4 Quick reference data

Table 2. Quick reference data …continued

[1] Pulse test: tp  300 s;  = 0.02

Product data sheet Rev. 1 — 5 July 2016 2 of 16

Product data sheet Rev. 1 — 5 July 2016 3 of 16

(1) FR4 PCB, 4-layer copper, 1 cm2

Unless otherwise specified:

Product data sheet Rev. 1 — 5 July 2016 4 of 16

FR4 PCB, single-sided copper, tin-plated and standard footprint

Product data sheet Rev. 1 — 5 July 2016 5 of 16

Product data sheet Rev. 1 — 5 July 2016 6 of 16

FR4 PCB, 4-layer copper, tin-plated and standard footprint.

Product data sheet Rev. 1 — 5 July 2016 7 of 16

[1] Pulse test: tp  300 s;  = 0.02

Product data sheet Rev. 1 — 5 July 2016 8 of 16

Product data sheet Rev. 1 — 5 July 2016 9 of 16

Tamb = 25 C f = 1 MHz; Tamb = 25 C

Product data sheet Rev. 1 — 5 July 2016 10 of 16

f = 1 MHz; Tamb = 25 C VCE = 5 V;

8.1 Quality information

Fig 18. Package outline SOT223 (SC-73)

Product data sheet Rev. 1 — 5 July 2016 11 of 16

3.9 6.1 7.65 solder paste

Fig 19. Reflow soldering footprint SOT223 (SC-73)

Fig 20. Wave soldering footprint SOT223 (SC-73)

Product data sheet Rev. 1 — 5 July 2016 12 of 16

11. Revision history

Product data sheet Rev. 1 — 5 July 2016 13 of 16

12. Legal information

12.1 Data sheet status

12.2 Definitions Suitability for use in automotive applications — This Nexperia

Product data sheet Rev. 1 — 5 July 2016 14 of 16

13. Contact information

Product data sheet Rev. 1 — 5 July 2016 15 of 16

© Nexperia B.V. 2017. All rights reserved

You might also like