Scribd
Upload
96 views1 page

Info Charger Technical Specifications

The document summarizes an Info Charger that provides 25 to 200 amps of power. It has a microprocessor controller and uses IGBT or PFC technology. It has a wide input voltage range, constant voltage and current regulation, adjustable boost and output voltages and currents, and protections against overloads and faults. The document also provides a technical specifications table comparing the models' power ratings, voltages, inputs, outputs, displays, protections and physical characteristics. It lists safety and EMC standards and optional features like alarms, low voltage disconnect, and parallel connections.

Uploaded by

Ahcène Mezghiche
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views1 page

Info Charger Technical Specifications

The document summarizes an Info Charger that provides 25 to 200 amps of power. It has a microprocessor controller and uses IGBT or PFC technology. It has a wide input voltage range, constant voltage and current regulation, adjustable boost and output voltages and currents, and protections against overloads and faults. The document also provides a technical specifications table comparing the models' power ratings, voltages, inputs, outputs, displays, protections and physical characteristics. It lists safety and EMC standards and optional features like alarms, low voltage disconnect, and parallel connections.

Uploaded by

Ahcène Mezghiche
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Info Charger

25Amp to 200Amp

Microprocessor Controller
IGBT Technology (ICH Series)
PFC Technology (ICC Series)
Transformerless Design
Wide Input Voltage Range
Operation according to constant voltage and current principle
Adjustable Boost and Nominal Charge Voltage ICC Series
Adjustable Output Current
High Voltage, Over Current, Short Circuit Protections
Over Temperature Protection
Alphanumerical LCD Display and Control Panel
Low DC Voltage Protection (LVD) - Optional
Dry Contact Alarms- Optional
ICH Series
Parallel Connection Availability at ICH Series - Optional
Small Footprints, Compact Size

Info Charger Technical Specifications


TYPE ICC2460 ICC4830 ICC11015 ICH2450 ICH24100 ICH24200 ICH4850 ICH48100 ICH11025 ICH11050
Power 60Amp 30Amp 15Amp 50Amp 100Amp 200Amp 50Amp 100Amp 25Amp 50Amp
DC Voltage 24VDC 48VDC 110VDC 24VDC 48VDC 110VDC
INPUT
Input Phase 1Phase 1phase / 3Phase
Nominal Voltage Range 90-265VAC 176-280VAC ( Ph - N )
Frequency Range 50/60Hz ± 10%
Power Factor >0,98 >0,8
OUTPUT
Nominal Voltage 24VDC 48VDC 110VDC 24VDC 48VDC 110VDC
Nominal current 60Amp 30Amp 15Amp 50Amp 100Amp 200Amp 50Amp 100Amp 25Amp 50Amp
Output Current Adjustment value 0 to 60A 0 to 30A 0 to 15A 0 to 50A 0 to 100A 0 to 200A 0 to 50A 0 to 100A 0 to 25A 0 to 50A
Max Output Current 110% of Inominal
Boost Charge Voltage 100% - 120% of the nominal output voltage
Output Fluctuation <1% rms AC Output Voltage
Dynamic Response less than 2% of output voltage
Output protection electronic short circuit / over voltage
DISPLAY
LCD Display Panel Voltage, Current, Temperature, Charge and Status Informations
LED Display Panel Overload, Line, Battery, Load, LVD, Fault Indications
GENERAL
Cooling Forced ( FAN Cooling )
Isolation Voltage 2000VAC between output and chassis
Efficiency 90%
Operating Temperature 0 – 40 ºC
Relative Humidity 0% - 95%
Input/Output Connections Terminals
Fuses input, load and Battery
PHYSICAL SPECIFICATIONS
Net Weight (kg) 11,6 35
Dimensions (mm) (WxDxH) 250x420x280 265x556x560
STANDARDS
Safety EN62040-1-1
EMC EN62040-2
Performance EN62040-3
Protection Class IP 20
OPTIONS
Dry Contact Card 9pcs contact alarms (NO/NC) 8pcs contact alarms (NO/NC)
LVD Low Voltage Disconnect (Contactor)
Parallel Connection Not Available up to 7 units

L
NA
IO

CE
RNAT

RTIFICAT
E
INT

ON
I

You might also like