Series 90

130 cc Axial Piston

Motor

Parts Manual
 Series 90 130 cc Axial Piston Motor
Parts Manual

© 2007 Sauer-Danfoss. All rights reserved.

Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products already
ordered provided that such alterations aren’t in conflict with agreed specifications. All trademarks in this
material are properties of their respective owners.

Front cover illustrations: P100 609, P100 682, P100 630, P100 700

 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Contents

General Information Service parts identification.................................................................................................................. 4

Nameplate................................................................................................................................................. 4
Date code................................................................................................................................................... 5
Service bulletins...................................................................................................................................... 5
Procedure to identify a part................................................................................................................ 5

fixed displacement Order code................................................................................................................................................. 7

motor Common parts..................................................................................................................................... 8-9
Special hardware...............................................................................................................................8-15
End cap.............................................................................................................................................. 16-17
Loop flushing................................................................................................................................... 18-19
Charge pressure.............................................................................................................................. 20-21
Shaft.................................................................................................................................................... 22-23
Overhaul seal kit....................................................................................................................................23

service bulletin SB-1995-023 (slipper guide retainer).............................................................................................24

SB-2003-002 (cylinder block redesign).........................................................................................25

520L0896 • Rev AB • June 2007 

 Series 90 130 cc Axial Piston Motor
Parts Manual
General information

Service parts The following information and procedure is used to identify the module group, item
indentification number, manufacture date, part number, and part name of the parts included in the
Series 90, 130 cc motors.

The parts listed include all parts which may be used when performing either “Minor
Repairs”,“Major Repairs” or “Conversions” on the Series 90, 130 cc motor.

nameplate Each unit will have a nameplate affixed to

the housing. The nameplate will include the
following information.

Model Code
The Sauer-Danfoss model code completely
defines the specific unit and must be used
when ordering parts to service this product. Ames, Iowa, U.S.A. Neumunster, Germany
Model Code Typ
Model Number 90M130 NC 0 N
The Sauer-Danfoss model number is used by 8 N 0 F1 W 00
the factory in manufacturing. On repeat orders,
a complete unit can be ordered by the model EBA 00 00 G3
Model No. Ident Nr
number.
9731000
Serial Number N - 05 - 18 - 12345
Serial No. Fabr Nr
The Sauer-Danfoss serial number is used to MADE IN GERMANY

identify the manufacture date and the unit

sequence in the build. The serial number is also
used to identify the units warranty time period.

The letter code indicates the location of original

manufacture (assembly). “A” indicates the unit
was originally assembled in Ames, Iowa, USA.
“N” indicates the unit was originally assembled
in Neumunster, Germany.

The first number (2 digits) indicates the year of

manufacture. (“05” would indicate the unit was
manufactured in 2005)

The second number (2 digits) indicates the

calendar week of manufacture.

The third number (5 digits) is a sequential

number used to identify a specific unit.

 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
General information

date code The date code is defined as the year and week of manufacture. The same item number
may list more than one part number. This indicates that there is more than one
configuration for that item number. You will see that there are different date codes
for the different part numbers. Find the date code of your unit from the nameplate to
determine which service part number you need to order.

EXAMPLE: The service part desired is Item H10

Order Date Date
Code Item Begin End Part Number Part Name Usage
N H10 89-38 8800668 Loop flushing spool, defeated 1
H10 87-02 89-37 8800021 Loop flushing spool, defeated (SB-1989-020) 1

All units using this order code with a date code of 87-02 and up to and including 89-37,
must use part number “8800021”. All units with a date code of 89-38 and newer must use
part number “8800668.”.

service bulletins A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the “Part Name” of the part you
desire. You must read that Service Bulletin prior to ordering that part. The information
contained in these Service Bulletins, as of the print date of this bulletin, are included
at the end of this manual. Service Bulletins contain more detailed information such as
interchangeability, what additional parts are involved, etc. It is suggested that you add
additional Service Bulletins to this manual as you recieve them.

procedure to identify General

a part The modular design of Series 90 units results in a simplified service parts list and part
number identification procedure.

The same item numbers are used for same part names on all units within a product type.
(Example: The lip seal - Item L40 has the same item number on all motors.)

A part number that has another number following it in parentheses is done to make this
a world wide manual. The first number is sold in Germany. The number in parentheses
is sold in the United States. (Example: 314583 (9008000-0118), customers would order
9008000-0118 if ordering the part in the United States.)

Example of a Part Identification

The nameplate on a Series 90 motor has an Order Code of 90M130 NC 0 N 8 N 0 F1 W 00
EBA 00 00 G3 Use the following procedures to determine the part number of the drive
shaft used on this motor.

1) Referring to the output shaft module in the Order Code (see page 7), the output shaft
option for this motor is identified by the code “S1”. (90M130 NC 0 N 8 N 0 F1 W 00 EBA 00
00 G3)

2) Referring to the Service Parts List, find the shaft group. Next find the order code that
relates to this unit, which is “F1”. The shaft is found to be item L100 and part number
310458.

520L0896 • Rev AB • June 2007 

 Series 90 130 cc Axial Piston Motor
Parts Manual
Notes

 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Order code

series displacement
G L H W K
9 0 M 1 3 0 NC 0 N 8 N 0 F 1 W 0 0 E B A 0 0 0 0 G 3
type

not applicable

not applicable

not applicable

end cap

not applicable

not applicable

shaft

Loop flushing

not applicable

special hardware features

not applicable

not applicable

charge pressure setting

P100 711E

520L0896 • Rev AB • June 2007 

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

L60
L70

L0
L50
b8
L0
L15
b8a
B80 L10 L34
B80A
B80

b80a

B10

B50
b81a d50
B81
b8a
B50 b8
B81A
B81

c0

s0 c0
c0
C05
c5

C13
G50
C14 G51A
C50 G50A
G51
C15
C16

G70A G30
G70
c80

E100 871E

G96
G90 Enlarged bold type item
numbers are recommended
part to stock for servicing.
G90

 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

common parts
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
B10 89-04 304014 Housing 1
B80A 89-04 001172 (9004201-9000) O-ring 1
B81A 89-04 001172 (9004201-9000) O-ring 1
B83A 89-04 085043 (9004201-3700) O-ring 1
C13 89-04 700922 Spring seat 1
C14 89-04 302828 Cylinder block spring 1
C15 89-04 700930 Spring retainer 1
C16 89-04 302836 Retaining ring 1
C20 89-04 727750 Piston assembly, welded 9
C30 89-04 735506 Slipper guide 1
C40 89-04 500445 Slipper guide retainer (SB-1995-023) 1
C45 89-04 505369 Slipper guide retainer spacer (SB-1995-023) 1
C50 89-04 761007 Hold down tube 1
C80 89-04 502190 Valve plate 1
D50 89-04 505364 Thrust plate 1
G25 89-04 9004800-3708 Pin 2
G30 89-04 304311 End cap gasket 1
G50 89-04 140644 Plug assembly 2
G50A 89-04 085043 (9004201-3700) O-ring 2
G70 89-04 140644 Plug assembly 2
G70A 89-04 085043 (9004201-3700) O-ring 2
G90 89-04 309328 (9007210-1618) Screw 4
G95 89-04 674432 (9007210-1610) Screw 2
G96 89-04 648444 (9007210-1018) Screw 1
L10 89-04 304857 Roller beraing 1
L15 89-04 376319 Shim 1
L20 89-04 392209 Retaining ring 1
L50 89-04 509353 O-ring 1
L70 89-04 395723 (9007315-0805) Screw 3

special hardware
EAD B80 89-04 511925 Adaptor assembly 1
B81 89-04 320002 (9005110-9200) Plug assembly 1
B83 89-04 KPPG12508 Speed sensor assembly 1
C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L60 89-04 516769 Retainer plate 1
S07 89-04 519277 Cylinder block kit w/speed ring 1

EBA B80 89-04 320002 (9005110-9200) Plug assembly 1

B81 89-04 511925 Adaptor assembly 1
B83 89-04 KPPG13408 Speed sensor assembly 1
C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L60 89-04 516769 Retainer plate 1
S07 89-04 519277 Cylinder block kit w/speed ring 1

520L0896 • Rev AB • June 2007 

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

L60
L70

L0
L50
L60
L70

L0
L34

L50 L0

B80A B80 L34

B10

b81a
B81
B83A
B83

C05
s0

E100 872E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

10 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
EEA B10 89-04 304014 Housing 1
B80 89-04 320002 (9005110-9200) Plug assembly 1
B80A 89-04 001172 (9004201-9000) O-ring 1
B81 89-04 511925 Adaptor assembly 1
B81A 89-04 001172 (9004201-9000) O-ring 1
B83 89-04 140644 Plug assembly 1
B83A 89-04 085043 (9004201-3700) O-ring 1
C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519277 Cylinder block kit w/speed ring 1

EEE B10 89-04 304014 Housing 1

B80 89-04 320002 (9005110-9200) Plug assembly 1
B80A 89-04 001172 (9004201-9000) O-ring 1
B81 89-04 511925 Adaptor assembly 1
B81A 89-04 001172 (9004201-9000) O-ring 1
B83 89-04 140644 Plug assembly 1
B83A 89-04 085043 (9004201-3700) O-ring 1
C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519277 Cylinder block kit w/speed ring 1

EEG B10 89-04 304014 Housing 1

B80 89-04 320002 (9005110-9200) Plug assembly 1
B80A 89-04 001172 (9004201-9000) O-ring 1
B81 89-04 511925 Adaptor assembly 1
B81A 89-04 001172 (9004201-9000) O-ring 1
B83 89-04 140644 Plug assembly 1
B83A 89-04 085043 (9004201-3700) O-ring 1
C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1
L34 89-04 515842 Seal assembly, double lip seal 1
L40 89-04 9008000-0114 Lip seal 2
L50 89-04 509353 O-ring 1
L60 89-04 515343 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519277 Cylinder block kit w/speed ring 1

520L0896 • Rev AB • June 2007 11

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

L60
L70

L0
L50
L60
L70

L0
L34

L50 L0

B80A B80 L34

B10

b81a
B81
b8a
b8
B81A
B81

s0

C05

S07

C05

E100 873E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

12 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
EGF B10 89-04 304014 Housing 1
B80 89-04 320002 (9005110-9200) Plug assembly 1
B80A 89-04 001172 (9004201-9000) O-ring 1
B81 89-04 511925 Adaptor assembly 1
B81A 89-04 001172 (9004201-9000) O-ring 1
B83 89-04 KPPG13703 Speed sensor assembly 1
B83A 89-04 085043 (9004201-3700) O-ring 1
C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1
L34 89-04 515842 Seal assembly, double lip seal 1
L40 89-04 9008000-0114 Lip seal 2
L50 89-04 509353 O-ring 1
L60 89-04 515343 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519277 Cylinder block kit w/speed ring 1

GBG B10 89-04 304014 Housing 1

B80 89-04 320002 (9005110-9200) Plug assembly 1
B80A 89-04 001172 (9004201-9000) O-ring 1
B81 89-04 320002 (9005110-9200) Plug assembly 1
B81A 89-04 001156 (9004201-9000) O-ring 1
C05 89-04 519258 Cylinder block assembly w/o speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519276 Cylinder block kit w/o speed ring 1

HAA B10 89-04 11014133 Housing 1

B80 89-04 320002 (9005110-9200) Plug assembly 1
B80A 89-04 001172 (9004201-9000) O-ring 1
B81 89-04 320002 (9005110-9200) Plug assembly 1
B81A 89-04 001156 (9004201-9000) O-ring 1
C05 89-04 519258 Cylinder block assembly w/o speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519276 Cylinder block kit w/o speed ring 1

520L0896 • Rev AB • June 2007 13

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

L60
L70

L0
L50

L34
B80A B80

B10

b81a
B81
b8a
b8
B81A
B81

s0

C05

S07

C05

E100 874E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

14 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

special hardware
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
HAB B10 89-04 11014133 Housing 1
B80 89-04 320002 (9005110-9200) Plug assembly 1
B81 89-04 511925 Adaptor assembly 1
B83 89-04 KPPG13703 Speed sensor assembly 1
C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519277 Cylinder block kit w/speed ring 1

JAA & JAB B10 89-04 304014 Housing 1

B80 89-04 320002 (9005110-9200) Plug assembly 1
B81 89-04 320002 (9005110-9200) Plug assembly 1
C05 89-04 519258 Cylinder block assembly w/o speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519276 Cylinder block kit w/o speed ring 1

LAA B10 89-04 304014 Housing 1

B80 89-04 320002 (9005110-9200) Plug assembly 1
B81 89-04 320002 (9005110-9200) Plug assembly 1
C05 89-04 519258 Cylinder block assembly w/o speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519276 Cylinder block kit w/o speed ring 1

NNN B10 89-04 304014 Housing 1

B80 89-04 320002 (9005110-9200) Plug assembly 1
B81 89-04 320002 (9005110-9200) Plug assembly 1
C05 89-04 519258 Cylinder block assembly w/o speed ring (SB-2003-002) 1
L34 89-04 510018 Seal assembly 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1
L60 89-04 516769 Retainer plate 1
L70 89-04 395723 (9007315-0805) Screw 3
S07 89-04 519276 Cylinder block kit w/o speed ring 1

520L0896 • Rev AB • June 2007 15

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

G50
G50A
G50A
G50 G0

G04

G70A
G70
G0
G29A
G29
G04
G29

twin port end cap axial port end cap

G33

G33A

G0
G
G04

G33 G33
G29A
G29
G22

G29 G33A
Ga
G33 G21
G23
axial port end cap with solenoid

E100 821E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

16 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

end cap
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
8 G04 89-04 310706 End cap assembly., twin 1
G20 89-04 303693 Journal bearing 1
G50 89-04 140644 Plug assembly 2
G50A 89-04 085043 (9004201-3700) O-ring 2
G70 89-04 140644 Plug assembly 2
G70A 89-04 085043 (9004201-3700) O-ring 2

U G04 89-04 515816 End cap assembly., axial 1

G20 89-04 303693 Journal bearing 1
G21 89-04 515824 Piston 1
G22 89-04 515826 Spring 1
G23 89-04 9005110-7500 Plug assembly 1
G23A 89-04 9004201-5000 O-ring 1
G29 89-04 140644 Plug assembly 2
G29A 89-04 9004201-3700 O-ring 2
G32 89-04 517171 Solenoid valve, 12 volt 1
G33 89-04 504519 Plug assembly 4
G33A 89-04 9004201-1200 O-ring 4

Z G04 89-04 11006400 End cap assembly., axial 1

G20 89-04 303693 Journal bearing 1
G29 89-04 140644 Plug assembly 2
G29A 89-04 9004201-3700 O-ring 2

520L0896 • Rev AB • June 2007 17

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

H50
H60
h50a
H60A

H30
H20

h0a
H70 H10
H20
H30
H50

h50a

H60

H60A
H50

H50A

H10
H50

H50A

H50

h50a

H10
H20
H30
H50

h50a

E100 876E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

18 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

loop flushing
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
D H10 89-04 519246 Shuttle spool 1
H20 89-04 515828 Spring guide 2
H30 89-04 515829 Spring 2
H50 89-04 516119 Plug assembly 2
H50A 89-04 012559 (9004202-6200) O-ring 2
H60 89-04 001529 (9005100-7500) Plug assembly 3
H60A 89-04 001131 (9004201-5000) O-ring 3
H70 89-04 140644 Plug assembly 1
H70A 89-04 085043 (9004201-3700) O-ring 1

H H10 89-04 515827 Shuttle spool 1

H20 89-04 515828 Spring guide 2
H30 89-04 515829 Spring 2
H50 89-04 516119 Plug assembly 2
H50A 89-04 012559 (9004202-6200) O-ring 2
H60 89-04 001529 (9005100-7500) Plug assembly 3
H60A 89-04 001131 (9004201-5000) O-ring 3
H70 89-04 140644 Plug assembly 1
H70A 89-04 085043 (9004201-3700) O-ring 1

N H10 89-04 334565 Loop flushing spool, defeated 1

H50 89-04 001529 (9005100-7500) Plug assembly 2
H50A 89-04 001131 (9004201-5000) O-ring 2
H60 89-04 001537 (9005100-8700) Plug assembly 1
H60A 89-04 001149 (9006201-6200) O-ring 1

W H10 89-04 304287 Shuttle spool 1

H20 89-04 338640 Spring guide 2
H30 89-04 506829 Spring 2
H50 89-38 508497 Plug assembly 2
H50A 89-04 001131 (9004201-5000) O-ring 2

520L0896 • Rev AB • June 2007 19

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

K95a

K50

E100 878E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

20 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

charge pressure setting

Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
00 none

A3 K 97-11 8510256 Cartridge CPRV kit, 13 bar, 16 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

B0 K 97-11 11020552 Cartridge CPRV kit, 13 bar, 22 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

B3 K 97-11 8510243 Cartridge CPRV kit, 13 bar, 27 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

E4 K 97-11 8510261 Cartridge CPRV kit, 16 bar, 4 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

E6 K 97-11 8510252 Cartridge CPRV kit, 16 bar, 7 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

F0 K 97-11 8510259 Cartridge CPRV kit, 16 bar, 11 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

F3 K 97-11 8510262 Cartridge CPRV kit, 16 bar, 16 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

G0 K 97-11 8510260 Cartridge CPRV kit, 16 bar, 22 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

G3 K 97-11 8510263 Cartridge CPRV kit, 16 bar, 27 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

K0 K 97-11 8510349 CPRV kit, special, 40 L/min 1

K95 97-11 001529 (9005100-7500) Plug assembly 1
K95A 97-11 001131 (9004201-5000) O-ring 1

N4 K 97-11 8510255 Cartridge CPRV kit, 13 bar, 4 L/min 1

K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1

520L0896 • Rev AB • June 2007 21

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

L80

L100

L100
L80

L100
L90

L61

E100 775E

Enlarged bold type item

numbers are recommended
part to stock for servicing.

22 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Fixed displacement motor

shaft
Order Date Date Qty. per
Code Item Begin End Part Number Part Name Model/Kit
C8 L100 89-04 304238 Shaft, 27 tooth spline, 16/32 1

F1 L100 89-04 310458 Shaft, 13 tooth spline, 8/16 1

F3 L100 89-04 515344 Shaft, 13 tooth spline, 8/16, special 1

L7 L100 89-04 515592 Shaft, 23 tooth spline, 16/32 1

S6 L100 89-04 310441 Shaft, 20 tooth spline, 12/24 1

overhaul seal kit

89-04 81030S30 Overhaul seal kit, 90M130
B80A 89-04 001172 (9004201-9000) O-ring 1
B81A 89-04 001156 (9004201-9000) O-ring 1
B83A 89-04 085043 (9004201-3700) O-ring 1
G30 89-04 304311 End cap gasket 1
G50A 89-04 085043 (9004201-3700) O-ring 2
G70A 89-04 085043 (9004201-3700) O-ring 2
H50A 89-04 001131 (9004201-5000) O-ring 2
K50 97-11 001149 (9004201-6200) O-ring 1
K95A 97-11 085043 (9004201-3700) O-ring 1
L40 89-04 9008000-0114 Lip seal 1
L50 89-04 509353 O-ring 1

520L0896 • Rev AB • June 2007 23

 Series 90 130 cc Axial Piston Motor
Parts Manual
Service Bulletin: SB-1995-023

products affected Series 90 130cc fixed motors

subject Change in slipper guide retainer

description Sauer-Danfoss has changed the slipper guide retainer from a one piece retainer
assembly to a two piece retainer on all 130cc fixed motors. This change creates a uniform
product design platform for the 100cc, 75cc, 55cc, and 130cc motors.

The new slipper guide retainer can be used with any vintage motor. The old slipper guide
retainer assembly will be obsoleted and no longer available as a service part.

Slipper guide retainer assembly

Slipper guide retainer (C40)

Slipper guide retainer shim (C45)

models affected All 97-3000 and 973xxx fixed displacement motors

serial numbers Units built with serial number N-95-26-xxxxx and after.

part numbers Description Old p/n New p/n

affected Slipper guide retainer assembly 309443 -
Slipper guide retainer - 500445
Slipper guide retainer shim - 505369

parts disposition Interchangeable

24 520L0896 • Rev AB • June 2007

 Series 90 130 cc Axial Piston Motor
Parts Manual
Service Bulletin: SB-2003-002

products affected Series 90 130 thru 250cc pumps and motors

subject Redesign of cylinder block running face

description As a product improvement, Sauer-Danfoss is changing the outer foot of the running face
on cylinder blocks used in all Series 90 variable pumps, fixed motors, and variable motors.
The outer foot is now lower by .0008 to .0039in. [.02 to .1mm] than the running surface
around the kidneys. The increased clearance between the outer foot and the valve plate
helps optimize the unit’s performance. This change will improve the torque efficiency
and volumetric efficiency of the product.

A part number change tracks this change. We will replace the part numbers on previous
blocks and block kits with new part numbers. The old part numbers are obsolete. They
are no longer available for service parts.

Outer foot

models affected Series 90 130 thru 250cc pumps and motors

serial numbers Units built with serial number N-03-19-xxxxx for 130cc.
Units built with serial number N-03-41-xxxxx for 180cc.
Units built with serial number N-03-25-xxxxx for 250cc.

part numbers 130cc 180cc

affected Old part number New part number Old part number New part number
510330 519258 518355 519278
518318 519275 8510160 519278
518056 519274
518405 519277 518354 519261
518317 519276 510694 519261
519054 519259
515351 519259 250cc
8510087 519275 Old part number New part number
510307 519274 518359 519279
503753 519259
302851 519258 8510148 519279
518356 519265
513474 519265

parts disposition Interchangeable

520L0896 • Rev AB • June 2007 25
 Series 90 130 cc Axial Piston Motor
Parts Manual
Notes

26 520L0896 • Rev AB • June 2007

Series 90 130 cc Axial Piston Motor
Parts Manual
Notes

520L0896 • Rev AB • June 2007 27

OUR PRODUCTS Sauer-Danfoss Mobile Power and Control Systems
– Market Leaders Worldwide
Hydrostatic transmissions
Sauer-Danfoss is a comprehensive supplier providing complete
Hydraulic power steering
­systems to the global mobile market.
Electric power steering
Sauer-Danfoss serves markets such as agriculture, construction, road
Electrohydraulic power steering
building, material handling, municipal, forestry, turf care, and many
Closed and open circuit axial piston others.
pumps and motors
Gear pumps and motors We offer our customers optimum solutions for their needs and
develop new products and systems in close cooperation and
Bent axis motors partner­ship with them.
Orbital motors
Sauer-Danfoss specializes in integrating a full range of system
Transit mixer drives ­components to provide vehicle designers with the most advanced
Planetary compact gears total system design.

Proportional valves Sauer-Danfoss provides comprehensive worldwide service for its

Directional spool valves products through an extensive network of Global Service ­Partners
strategically located in all parts of the world.
Cartridge valves
Hydraulic integrated circuits
Local address:
Hydrostatic transaxles
Integrated systems
Fan drive systems
Electrohydraulics
Microcontrollers and software
Electric motors and inverters
Joysticks and control handles Sauer-Danfoss (US) Company Sauer-Danfoss ApS
2800 East 13th Street DK-6430 Nordborg, Denmark
Displays Ames, IA 50010, USA Phone: +45 7488 4444
Sensors Phone: +1 515 239-6000 Fax: +45 7488 4400
Fax: +1 515 239 6618

Sauer-Danfoss GmbH & Co. OHG Sauer-Danfoss-Daikin LTD

Postfach 2460, D-24531 Neumünster Sannomiya Grand Bldg. 8F
Krokamp 35, D-24539 Neumünster, Germany 2-2-21 Isogami-dori, Chuo-ku
Phone: +49 4321 871-0 Kobe, Hyogo 651-0086, Japan
Fax: +49 4321 871 122 Phone: +81 78 231 5001
Fax: +81 78 231 5004

520L0896 • Rev AB • June 2007