ADU4518R1

DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m

Antenna Specifications
Electrical Properties
2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880 1850 - 1990 1920 - 2170 2170 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable , each band separately
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Gain (dBi)
17.0 17.4 17.1 17.3 17.7 17.4 17.6 18.0 17.4 17.5 18.0 17.4

Side lobe suppression for first side 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
lobe above main beam (Typ.) (dB) 18 17 17 19 18 18 19 18 17 19 18 17
Horizontal 3dB beam width (°) 67 64 61 60
Vertical 3dB beam width (°) 7.5 7.0 6.6 6.2
VSWR < 1.5
Isolation between ports (dB) ≥ 30
Front to back ratio, copolar (dB) Typ. 28
0° Typ. 22
Cross polar ratio (dB)
±60° Typ. 10
Max. power per input (W) 300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Squint (°) Avg. 2.0
Tracking (dB) Avg. 1.5 (within 10dB HBW)
Impedance (Ω) 50
Grounding DC Ground

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1311 x 323 x 89
Packing dimensions (H x W x D) (mm) 1595 x 365 x 145
Antenna weight (kg) 13.6
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 21.3 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
1311
1189

Frontal: 565 (at 150 km/h)

Wind load (N) Lateral: 105 (at 150 km/h)
Rear side: 640 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 4 x 7/16 DIN Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0B01 Mechanical downtilt: 0 - 16 ° 1.3 kg 1 (Separate packing)

1
 ADU4518R1
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 37 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RET S/N: HWMxxx…..bL

HWMxxx…bbR
b – Blue
L - Left array R - Right array

Pattern sample for reference

1710 - 2200 MHz

NOTE

1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2 Issue: 2015-11-05