Distribution Switchgear: Technical Catalogue - June 2014

Technical catalogue | June 2014
Distribution switchgear
Index
1
Presentation of the range
2
Gemini switchboards
3
ArTu L modular structures
4
ArTu M monobloc structures
5
ArTu K modular structures
6
In-depth technical information
7
Overall dimensions
8
Index of codes
ABB Tecnichnical catalogue | 1STC008001D0204

ABB SACE Division – Environmental and Ethics Quality certificated
Among the companies in the Group, ABB SACE is up front

in dedicating considerable resources to achieving sustainable
development and environmental protection objectives.
Confirmation of this is provided by all the company production
sites having obtained ISO 9001 quality certification and ISO
14001 environmental management system certifications.
Using analysis tools such as The Garbagnate Monastero site has also obtained the certification of integrated management system
LCA (Life Cycle Analysis), QAS (Quality, Environment and Safety management system.)
ABB SACE’s design activities All company sectors are, in fact, actively involved in implementing improvement policies for
already include assessment environmental management through rationalisation of consumption of raw materials and energy,
and improvement of the prevention of pollution, respect of water and air, limitation of noise emission and reduction in waste
environmental performances from production processes, as well as carrying out periodic environmental audits at major suppliers
of its products over their ‘premises.
whole life cycle during the Each of these objectives and activities is the result of farsightedness in adopting ecological policies
initial stage, in order to and methods for reducing the environmental loads and, within the panorama of Italian companies,
guarantee optimisation of ABB SACE is a leader from this viewpoint, too, just as it is for the quality of its products.
the technical and energy
performances during service,
to control and reduce
environmental impact during
the production stage and
to define the end of life
management scenarios.
ABB: Energy Efficiency for a sustainable

development.
ABB takes care of its commitment in promoting environmental protection and
development, providing sustainable products and solutions that contribute to improving
energy efficiency and plant productivity, reducing at the same time CO2 emissions.
Selection and design tools
Technical softwares
DOC 2
DOC 2 is a program for the design and calculation of single-line diagrams of low- and medium-volta-
ge electrical systems, for selection of switching and protection devices and for testing and co-ordina-
tion of protection devices.
Thanks to the design functions provided by the integrated CAD, the new switchboard configuration
module makes it possible to develop ABB electrical switchboard projects and produce commercial
technical quotations with CAT.
CAT 7 FrontCAD is compatible

CAT 7 is a tool allowing ABB SACE products to be easily chosen and fitted with accessories in order with different type of CAD
to rapidly and accurately prepare estimates and quotes. application.
With CAT 7 choosing and adding accessories to ABB SACE products is now easier and faster than “DOC & CAT” is the technical
ever, thanks to the new product selection mask and accessory module. software suite which helps
to bring projects and quotes
Curves to fruition easily, quickly and
Curves is the most direct software for verifying the characteristics of protection devices and system completely.
components intervention. The entire software
Setting, verifying and documenting the calibration of release devices and co-ordinations is easier than collection is available to
ever before. download for free from the
Online Business portal.
OTC ABB Software Desktop is a
The OTC thermal calculation module makes it possible to verify the thermal performance of ABB platform for installing and
switchboards and to size fans and air conditioning units to install on the panel. managing these Softwares.
ABB Software Desktop
Front CAD automatically detects which
FrontCAD is a CAD application for drawing the electric boards design and layouts. programs are installed on the
FrontCAD contains a big library of blocks, shapes of many ABB products, like enclosures and other computer, allowing them to
electrical devices; those draws can be used to create the CAD layout of distribution and automation be updated.
switchboards.
Gemini.
Something completely different in switchboards.
Gemini. Quality and safety.

ABB’s Gemini is designed and built in compliance with reference Standards that
define its constructional and functional characteristics. In particular, the IP66 degree
certifies that Gemini is totally protected against the infiltration of solid bodies and is
resistant to the penetration of jets of water similar to sea waves.
Absolute protection is provided by double insulation even in the event of indirect
contact.
Gemini. Fit for all applications.
Even in very difficult application circumstances, Gemini gives high-level performances,
with resistance to fire and abnormal heat up to a temperature of 750 °C and a
functioning temperature from -25 °C to 100 °C.
There are as many configurations as there are ABB devices for low voltage automation
and distribution: moulded-case circuit breakers, modular circuit breakers, monitoring,
control and signaling devices, wiring ducts and electrical connection systems.
All of these components give the “Gemini system” an enormous range of ad hoc
solutions that are easy to assemble with the snap-on system.
ArTu.
Go ahead and select the switchgear you need.
ArTu. A great offer, really high performances

ABB proposes three series of switchgear with different characteristics thought up to
make it possible to select the most suitable switchgear for the installation requirements.
Different sizes for optimal use of the spaces available. Great savings in storage space
is ensured by the rapid assembly kit containing so few pieces that skilled personnel
is not required. IP degrees of protection for all types of application up IP65 - the only
switchgear to reach such a high value. Extremely sturdy and flexible, it is made for
plants up to 6300A.
ArTu. Born certified.

Fully checked and certified (IEC 60439-1 and IEC 61439-1 and 2 Standard) by an
external independent organisation (Acae Lovag), the ArTu switchgear is a synonym of
safety and quality. The certification is the fruit of severe tests carried out on the whole
configuration, consisting of metalwork structures, circuit-breakers and busbar system.
Certificato N°OHS-015 Certificato N°1612/98/S
Certificato N° EMS-051 Certificato N°SGI004

ArTu. A long experience through many projects.
The ArTu switchgear was born from an innovative project, created around the needs
of all the professional figures involved in building and installing switchgear. This is
constantly updated on the basis of the numerous projects which over these past years
have had the ArTu series of switchgear as their leading player (Airports, underground
railways, hospitals, industrial complexes, residential complexes, ports, tunnels,
stretches of railways, theatres, etc.).
ArTu L.
Everything you need simply and conveniently
ArTu L. Why complicate your life?

Up to 800A you have a series of both wall-mounted and floor-mounted switchgear
available, able to ensure a high standard of quality along with maximum simplicity of
selection and assembly.
Fitted with a structure, which is completely open at the sides, means you can carry out
cabling very conveniently, with the switchgear placed horizontally on two trestles. And,
if we are talking about cabling, there is nothing which simplifies and speeds it up better
than the Unifix H or L wiring system, created by ABB for its modular and moulded-case
circuit-breakers.
The cable riser container is available in a width of 300mm to take different busbar
systems, and, furthermore, with a convenient box placed above the switchgear,
increases the space available for the incoming cables.
ArTu M.
Top level functionality and protection.
ArTu M. Maximum protection up to 630A.

The ArTu M series switchgear is ideal for terminal wall-mounted switchgear with
modular circuit-breakers and floor-mounted secondary distribution switchgear with
moulded-case circuit-breakers up to 630A.
Many versions are available, for wall-mounted installation with depths of 150 and
200mm and for floor-mounted installation, with a depth of 250mm.
The degree of protection is at top market levels, reaching up to IP65, thanks to an
innovative design and advanced construction systems.
The switchgear is available in 600mm useful width, with the possibility of installing 24
DIN modules in one row, and 800mm width choosing between installation of 24 DIN
modules in one row plus the cable riser, or 36 DIN modules in one row.
ArTu K.
New horizons up to 6300A.
ArTu. High performances? No problem

The ArTu K series switchgear is ideal for primary distribution switchgear (Power Center
type) with air and moulded-case circuit-breakers and any internal segregations up to
Form 4, and for floor-mounted secondary distribution switchgear with moulded-case
and modular circuit-breakers.
The ArTu K series consists of modular switchgear for floor-mounted installation with
depths of 150, 225, 300, 500, 700 and 900mm, with IP31, IP41 and IP65 degrees of
protection - the highest value available on the market.
Within the ArTu K series switchgear, like all the series in the range, it is possible to
install ABB apparatus (System Pro M modular circuit-breakers, Tmax moulded-case
circuit-breakers, T and XT series and Emax air circuit-breakers) with an excellent and
certified level of integration. The switchgear is available in four functional widths (390,
600, 800mm and 1000mm) and in two functional heights (1800 and 2000mm), which
allow installation of 9 and 10 modules 200mm in height respectively.
10 200
9 200 9
8 8
7 7
6 6
1800 2000
5 5
4 4
3 3
2 2
1 1
Characteristics of Gemini switchboards 1/2

Characteristics of ArTu 1/4 1
Composition of the series 1/8
ABB Technical catalogue | 1STC008001D0204 1/1

Characteristics of Gemini switchboards
Gemini is the result of design work conducted by ABB with the direct collaboration of
1
switchboard manufacturers, installers and designers who considered versatility to be
the discriminating element when purchasing a switchboard, equally as important as
sturdiness and reliability.
Gemini fulfils this requirement by providing a product that can be used for three different purposes: in addition to the basic configuration
it also provides the components necessary for equipping it as an automation switchboard or as a distribution and mixed switchboard.
In all applications, compatibility with ABB protection, control and monitoring products means that a real system of integrated and
complementary functions can be configured.
Typical examples of some Gemini applications can be seen in installations in industrial production departments and on board machines,
in galvanization plants and varnishing cabins, in petrol stations and car-washing plants, boiler-rooms, car parks, shopping malls and in
any other environments where distribution and automation demand specific safety requirements and service continuity.
Gemini also has flexible measurements, with six different box sizes and internal space to accommodate from 24 to 216 DIN modules.
To respect safety standards, all the switchboard’s components can be fixed to the base plate or to the box frame without having to use
any tools; wiring is carried out from the front followed by snapping the base plate or the frame onto the box. The patented frame is fitted
with the cable duct incorporated in the uprights.
In its design, Gemini repeats the shapes and RAL 7035 grey color of the ArTu switchboards with which it can be configured as a main
protection switchboard.
1/2 1STC008001D0204 | ABB Technical catalogue

In the basic configuration, Gemini switchboards are composed of boxes in six different
1
sizes ranging from 335x400x210 mm to 840x1005x360 mm (WxHxD, external
measurements) and with opaque or transparent doors.
In both versions, the doors are reversible and clip onto the hinges without the need to use tools; the fact that they open at an angle of
more than 180° means that it is easy to work on the components installed inside the switchboard. The seal applied by extrusion along
the sides of the doors guarantees IP66 degree of protection.
Access to the inside of the switchboard is protected by a standard double bit lock that can be replaced by locks of another type
available in the accessories. Boxes and doors can be requested either separately or as combined “box + door” codes, to make filling
out the order form more flexible.
Inside the packages, the door is always wrapped separately and inserted inside a pocket that protects it from accidental damage until
wiring is completed and the switchboard is installed.
Hole-cover plugs to guarantee IP protection and double insulation for wall mounting are also supplied with the pack together with the
instruction sheet.
Gemini is made in a thermoplastic material that has a very low halogen content and is 100% recyclable.
The environmental compatibility of Gemini is an important objective right from the design phase where the Life Cycle Assessment (LCA)
procedure, defined in 1990 during the Society of Environmental Toxicology and Chemistry Conference (Vermont, USA), is followed. Life
Cycle Assessment is an objective method for analyzing the energy and environmental loads relating to a product, process or activity,
carried out by identifying and quantifying energy, the materials used and emissions released into the environment. Divided into four
phases, the assessment covers the entire life cycle of the product, process or activity, from the extraction and transformation of raw
materials to manufacturing and distribution, and from usage to recycling and decommissioning.
No tools are
needed for
installation.
The doors hook
onto the hinges
with special hinge
pins and are
reversible.
Fixing hooks and

feet allow the
frame to be
snap-mounted
inside the box.

Characteristics of ArTu switchgears
The range of ABB SACE ArTu distribution switchgear provides a complete and
1
integrated offer of monobloc metalwork structures and kit systems for main and sub
low voltage distribution switchgear, which satisfy all plant requirements depending on
the type of installation, degree of protection required, and electrical and mechanical
characteristics.
Starting from simple assembly kits, the ArTu switchgear allows numerous switchgear configurations:
- for Power Center type main distribution, with a prevalence of air circuit-breaker and moulded-case circuit-breakers and any internal
segregations up to Form 4;
- for floor-mounted secondary distribution, equipped with moulded-case and modular circuit-breakers;
- for wall-mounted end distribution, with just modular circuit-breakers.
The user of ABB SACE circuit-breakers can therefore have a complete system of enclosures, in accordance with the reference
standards, which guarantees absolute compatibility between the various elements (enclosures, circuit-breakers and distribution
systems), together with maximum assembly and cabling facility.
Special consideration has been given to cabling requirements, foreseeing dimensions of the structure, but also providing special seats
for fixing the plastic cabling duct horizontally and vertically.
The ArTu switchgear is noted for the following features:

- integrated range of modular metalwork structures up to 6300 A with common accessories;
- possibility of fulfilling all application requirements in terms of installation (wall-mounting, floor-standing, monobloc, corner versions and
cabinet kits) and degree of protection (IP31, IP41, IP43, IP65);
- maximum integration with modular apparatus and the moulded-case and air circuit-breakers, so that additional drilling or adaptations
are not required;
- minimum switchgear assembly times, thanks to the simplicity of the kits, standardisation of the small assembly items, self-supporting
elements and the presence of clear reference points for assembly of the plates and panels;
- segregations in kits up to Form 4;
- use of the Unifix rapid cabling system.
The range of The ArTu

ArTu enclosure switchgear allows
structures allows segregations
construction up to Form 4
of numerous to be made
switchgear
configurations

The use and installation of the kits according to the instructions provided means that
1
assembly and cabling times can be reduced to a minimum, for example thanks to the
reference points for positioning the panels and plates, and that respect of the insulation
distances and the rated characteristics of the circuit-breakers are guaranteed.
The ArTu range includes three different series of switchgear, which are completed with
the same accessories:
ArTu L series
This consists of a range of modular switchgear kits, with a capacity of 36 modules per row and IP31 degree of protection (without door)
or IP43 (basic version with door). Installation can be either wall or floor-standing:
- Wall-mounted ArTu L, with 600, 800, 1000, and 1200mm (useful) heights, 165mm depth, 600mm width. It allows installation of the
modular System pro M apparatus, and moulded-case Tmax T1-T2-T3 circuit-breakers, XT1 and XT3 circuit breakers.
- Floor-standing ArTu L, with 1400, 1600, 1800, 2000mm (useful) heights, 195 mm depth, 600mm width. It allows installation of the
modular System pro M apparatus and moulded-case Tmax T1…T6 800A circuit-breakers (fixed version with front terminals); XT1...
XT4 (fixed version with front terminals).
ArTu M series
This consists of a range of monobloc switchgear for wall-mounted installation (with depths of 115 and 165mm and with IP65 degree
of protection) or floor-standing installation (with depth of 195 mm and IP31 or IP65 degree of protection), where it is possible to mount
System Pro M modular apparatus and Tmax T1, T2 and T3, XT1 and XT3 moulded-case circuit-breakers on a DIN rail.
In the wall-mounted versions (D =165 mm), the Tmax moulded-case circuit-breakers up to 250 A can be installed, whereas in the floor-
mounted versions, the moulded case Tmax T series up to T6, XT series up to XT4 circuit-breakers can be installed.
ArTu K series
This consists of a range of modular switchgear kits for floor-standing installation with six different (useful) depths: 150, 225, 300, 500,
700 and 900 mm, and with IP31 degree of protection (without front door), IP41 (with front door and side ventilated panels) and up to
IP65 (with front door and blind side panels). It is possible to install System Pro M modular apparatus, the ranges of T and XT series
circuit-breakers in all their possible configurations, and Emax X1, E1, E2, E3, E4 and E6 air circuit-breakers.
Use and installation

of the kits,
according to
the instructions
provided, allow
assembly and
cabling times to
be reduced to a
minimum

Characteristics of ArTu switchgears
The ArTu switchgear has the following functional widths:

1
- 390 mm, for installation of moulded-case circuit-breakers up to 1600 A (T7);
- 600 mm, which is the basic dimension for installation of all the apparatus;
- 800 mm, for making the lateral cable container inside the structure of floor-mounted
switchgear or to use panels with 36 DIN modules in one row.
- 1000mm, for installation of Emax E4, E6 air circuit-breakers.
The panels for Tmax, and Emax circuit-breakers have 100 mm modularity.
The useful inside height space varies from 600 mm (L wall-mounted series) to 2000 mm (L and M floor-standing series and K series),
offering optimisation and automatically reducing the spaces taken up by the switchgear.
With the shaped section busbar system, ArTu switchgear for low voltage power distribution further enhance perfect integration with the
apparatus and, in full conformity with the IEC 60439 Standard, can be certified by carrying out only the individual tests.
Using Artu enclosures and relative accessories together with modular apparatus and moulded-case and air circuit-breakers, it is
therefore possible to build AS or ANS type switchgear without carrying out further type tests, simply respecting the selection criteria and
the assembly instructions for the various components.
The ArTu distribution system consists of:
- shaped section copper busbars with capacity from 400 A to 3200A;
- flat copper busbars up to 6300A;
- busbar holders and relative crosspieces for short-circuit withstand up to 105kA;
- flexible busbars for connection of the moulded-case circuit-breakers and screws and hammer for connection of the latter to the
shaped section busbars.
The panels for

Tmax, and Emax
circuit-breakers
have 100mm
modularity

A peculiarity of the shaped section busbar system is its extremely compact dimensions,
1
which allow it to be assembled directly inside the cable container, on the back or on
the side of the structure, keeping front access. This is possible thanks to the scaled
or linear type busbar holders, which also allow assembly in the L or M floor-mounted
series of switchgear, with reduced dimensions.
The ABB SACE busbar and accessories system prepared for installation in ArTu distribution switchgear undergoes the short-circuit
withstand tests with a value of In up to 6300 A and Icw up to 105 kA (1s) according to the IEC 60439-1 Standard, in ABB laboratories
recognised by ACAE/LOVAG.
The Unifix rapid cabling system, which allows simple, rapid and safe cabling of all the ABB SACE apparatus, completes the switchgear.
Unifix is available in two versions: the Unifix H series, suitable for structured cabling of moulded-case circuit-breakers up to 250A (T
series up to T3 and XT series with XT1 and XT3) and modular System Pro-M circuit-breakers, and the Unifix L series, specifically for
rapid cabling of modular System Pro-M circuit-breakers.
A fundamental characteristic of these systems is the possibility of combining different types of circuits (single-phase/three-phase/
auxiliary) within a single module.
Unifix also allows bench cabling to be carried out, and to then only install it in the switchgear at a later time, without any limitation of the
types or combinations of apparatus which can be installed. This way cabling times are considerably reduced, making realisation of the
power supply by means of cables superfluous, as the rigid coupled connectors - standardised for the different types of apparatus - do,
in fact, see to this.
The ABB SACE The Unifix rapid

busbar system cabling system
and accessories
for installation
in the distribution
switchgear

Composition of the series
Gemini
Functional dimensions
(mm) Front coverings Tmax moulded-case
Unifix L System Pro M circuit-breakers
counterdoor glass door blind door distribution modular T1…T5
Height Width Depth Functional frames IP40 IP66 IP66 system apparatus 630A
300 250 180
450 375 230
600 375 230
600 500 230
750 500 330
900 750 300
ArTu L
Wall structures Floor structures
Functional dimensions Functional dimensions Internal cable Additional cable
container container
(mm) (mm) Width Width Front covers
Removable Cable
Height Width Depth Height Width Depth 200mm 300mm IP31 IP43 side panels connection box
600 600 165
800 600 165
1000 600 165
1200 600 165
1400 600 195
1600 600 195
1800 600 195
2000 600 195
1400 800 195
1600 800 195
1800 800 195
2000 800 195

1
Busbar distribution Unifix distribution

system system Tmax moulded-case circuit-breakers
System Pro M
Vert. Vert. Horiz. modular T1-T2-T3-T4-T5 T6 XT1-XT2-XT3-XT4
back cable container box L Series H Series apparatus ≤400A ≤800A ≤250A


ArTu M
Wall structures Floor structures Additional cable
Functional dimensions Functional dimensions container Front Side
(mm) (mm) Width covers covers
Internal cable
container
Height Width Depth Height Width Depth Width 300mm IP31 IP65 IP65
600 600 115
600 115
800
600 165
1000 600 165
1200 600 165
1400 600 195
600 195
1600
800 195
600 195
1800
800 195
600 195
2000
800 195

1
Busbar distri- System Pro M

bution Unifix modular
system distribution system apparatus Tmax moulded-case circuit-breakers
Vert. T1-T2 T3 T4-T5-T6 XT1-XT3 XT2-XT4

cable container L Series H Series ≤160A ≤250A ≤630A ≤250A ≤250A


ArTu K
Functional dimensions Internal cable Side
(mm) Functional frames container Front coverings coverings
Addit. cable
with container
reduced for frames for frames Width
Height Width Depth reduced open closed frames open closed 300mm IP31/41 IP65 IP31/41 IP65
600 150
1600
800 150
390 225
390 300
390 500
390 700
390 900
600 150
600 225
600 300
1800 600 500

2000 600 700
600 900
800 150
800 225
800 300
800 500
800 700
800 900
1000 900

1
Busbar distribution Unifix distribution Tmax moulded-case circuit- Emax air

system system breakers circuit-breakers
System Pro M E1-E2-
Segregations Vert. Vert. modular XT1…XT4 E3 E4 E6
Form 2/3/4 back side Horiz. L Series H Series apparatus T1…T6 T7/T8 250A X1 ≤3200A 4000A 6300A


Gemini switchboards
General 2/2
Selection of the structure 2/4
Kit for installing apparatus 2/6
Distribution system 2/9
Ordering codes 2/11 2
Examples of configurations 2/23

Gemini switchboards
General
ABB SACE’s Gemini range is revolutionizing the market of low voltage electric
insulating switchboards. The reason for this is that it is the first switchboard made in
thermoplastic material, to which the co-injection molding technique gives the same
2 mechanical characteristics as polyester.
This means that it is extremely sturdy, with its rigid covering Gemini switchboards have IP66 degree of protection (IP30 with
and expanded internal core. Moreover, it contains no fiberglass, the door open and with the appropriate components installed) and
a material that with time rises to the surface, jeopardizing the a very high resistance to chemical and atmospheric agents. This is
functioning and safety of switchboards made in polyester with the reason why Gemini guarantees excellent performances even in
which it is usually mixed. particularly severe operating conditions.
Gemini switchboards are made with co-

injection, which ABB SACE is the first
manufacturer in the electric field to use
as a molding technique.
This process obtains a “sandwich”
of two materials with a compact
external covering and an expanded
core, guaranteeing the highest level
of mechanical protection against
impacts (IK10) without the need to add
hardening substances.

In distribution and mixed applications, the Gemini switchboard inside the vertical wiring duct integrated in the uprights according
is designed to be fitted with System pro M modular devices and to an exclusive ABB patent.
Tmax moulded-case circuit breakers. Wiring is carried out by pulling out the frame and working from
The frame is the load-bearing element of the configuration: DIN the front; the ergonomic grip and the standard feet and snap-on
rails, partial modular plates and the special Tmax mounting and hooks supplied make it easy to insert it inside the switchboard 2
cabling kits are snapped onto the uprights. All the components after the job is finished.
can be adjusted up to six levels of depth with 12.5 mm pitch and
arranged in height with a standard installation pitch of 150, 225 To finish the job, the inner door can be mounted (reversible and in
and 300 mm and 75 mm distance between the rows. insulating material), guaranteeing IP30 degree of protection when
the switchboard door is open.
Blank or drilled front panels are applied to protect the equipment No tools are needed unless the inner door is equipped with
and these can be hinged onto both sides; the cables are housed buttons, warning lights, etc.
The frame can be The special

extracted to make structure of the
wiring operations inner perimeter of
easier at the the box ensures
workbench. further protection
against the
penetration of
water. The box is
supplied with a
spirit level.
Technical characteristics
Compliance with Standards CEI EN 50298, CEI 23-48, CEI 23-49, IEC 60670, CEI EN 60439-1 CEI EN 62208 - IEC 61439-1-2
Rated service voltage Ue 1000 V a.c. - 1500 V c.c.
Operating temperature °C -5 °C ÷ +40
Resistance to abnormal heat and fire up to 750 °C
Degree of resistance to impacts IK10 (IEC 62262)
Degree of protection (CEI EN 60529) IP 30 open door
IP 66 closed door
Recyclable 100%

Gemini switchboards
Selection of the structure
Rapid selection table

mod.
12/18 (L) (P)
24/36 L P
2
150
150
(H) H
External Functional Complete

N° of N° of
dimensions dimensions switchboards Door
vertical installable
mod. DIN (H) (W) (D) H W D
Size H=150mm modules mm mm mm mm mm mm Transparent Opaque Box Transparent Opaque Uprights
1 2 24 (12x2) 400 335 210 300 250 180 1SL0211A00 1SL0201A00 1SL0221A00 1SL0241A00 1SL0231A00 1SL0283A00
Sizes available
Available in 6 different sizes with transparent or opaque door, the Gemini switchboards are suitable for installation in any application
context.
330
900
330 500
36
230 mo
d.
500
230 375
24 900
mo
230 375 d.
24
18 mo
250 mo d. 750
180 d. 600
18 600
mo
d.
450
300 12 m
od
.
Size 1 Size 2 Size 3 Size 4 Size 5 Size 6
> Selection by components page 2/11 > In-depth technical information page 6/1 > Overall dimensions page 7/1

2
DIN rail kit Kit for Tmax Kit for Tmax XT series
DIN rail+drilled panel plate+drilled panel plate+drilled panel Blank panel Modular plate
1 mod. 1+1/2 mod. 1 mod. 2 mod. 1 mod. 2 mod. 1/2 mod. 1 mod. 2 mod. 1 mod. 2 mod.
H=150mm H=225mm H=150mm H=300mm H=150mm H=300mm H=75mm H=150mm H=300mm H=150mm H=300mm DIN rail
1SL0307A00 - - - - - 1SL0318A00 1SL0324A00 1SL0330A00 1SL0296A00 - 1SL0290A00
1SL0308A00 1SL0313A00 1SL0336A00 1SL0370A00 1SL0373A00 1SL0376A00 1SL0319A00 1SL0325A00 1SL0331A00 1SL0297A00 1SL0302A00 1SL0291A00

Gemini switchboards
Suggestion for installation of Tmax moulded-case circuit breakers

The table indicates the type of installation required for the different versions of Tmax moulded-case circuit breakers in Gemini
switchboards. Before carrying out wiring operations check compliance with Standards on the basis of the technical characteristics of the
2 switchboard and circuit breaker (CEI 23-51 or CEI EN 60439-1).
T1 T2 T3 T4 T5 XT1 XT2 XT3 XT4

Size Installation 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D 3p 4p 3p D 4p D
1 D
O1
T
2 D
K1
K2
O1
O2
T
3 D
K1
K2
O1
O2
T
4 D
K1
K2
O1
O2
T
5 D
K1
K2
O1
O2
T
6 D
K1
K2
O1
O2
T
Caption
- D, installation on DIN rail
- K1, installation with Tmax kit H = 150 (holes made)
- K2, installation with Tmax kit H = 300 (holes made)
- O1, installation on modular plate (1 module, H = 150 mm)
- O2, installation on modular plate (2 modules, H = 300 mm)
- T, installation on total base plate

Horizontal installation
Kit for Tmax with pre-drilled holes

Size/Codes
Fixed circuit-breaker with front
terminals N° poles Dimensions H (mm) 2/3 4/5 6
Tmax T1 03/4 150 1SL0336A00 1SL0337A00 1SL0338A00
Tmax T2 03/4 150 1SL0336A00 1SL0337A00 1SL0338A00
Tmax T2+diff.le 3 300 1SL0370A00 1SL0371A00 1SL0372A00
Tmax T3 03/4 300 1SL0370A00 1SL0371A00 1SL0372A00
Vertical installation
Installation on DIN rail

Size/Codes
Fixed circuit-breaker with front
terminals N° poles Dimensions H (mm) 1 2/3 4/5 6
System Pro M compact 150 1SL0307A00 1SL0308A00 1SL0309A00 1SL0310A00

modular apparatus 225 1SL0313A00 1SL0314A00 1SL0315A00
Tmax T1-T2-T3 3/4 225 1SL0313A00 1SL0314A00 1SL0315A00

Gemini switchboards
Kit for installing apparatus
Wiring ducts
12
2 6
8
4
Wiring ducts Fix-O-rapid

Base H Slot Slot Rapid snap-on bases Rapid snap-on bases
(mm) (mm) 8-12 mm 4-6 mm for DIN rail for plate
15 17 05 019 05 119 - -
30 05 033 05 133
40 05 043 05 143
25 60 05 063 05 163 05 250 05 270
80 05 083 05 183
100 05 094 05 194
30 05 035 05 135
40 05 045 05 145
40 60 05 065 05 165 05 252 05 272
80 05 085 05 185
100 05 095 05 195
30 05 037 05 137
40 05 047 05 147
60 60 05 067 05 167 05 254 05 274
80 05 087 05 187
100 05 096 05 196
40 05 049 05 149
60 05 069 05 169
80 05 256 05 276
80 05 089 05 189
100 05 097 05 197
40 05 051 05 151
60 05 071 05 171
100 05 258 05 278
80 05 091 05 191
100 05 098 05 198
40 05 053 05 153
120 05 260 05 280
80 05 093 05 193
150 100 05 099 05 199 05 262 05 282

Distribution systems
Modular dividers
Single-pole Three-poles
Code AD1076 AD1080(1) AD1007 D1081(2) AD1030 AD1031 AD1075 AD1006

In (A) 125 125 175 175 250 400 125 175
Icw (kA) 4.4 4.2 11 1.1 21 21 4.4 11
Version poles 1 1 1 1 1 1 3 3
Installation DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate DIN35/plate
Power supply Ø cable (mm2) min. 10 6 16 10 35 95 10 16
max 35 35 70 70 120 185 35 70
2
N°outgoing feeder Ø cable (mm ) 1,5÷10 4 4
2,5÷16 10 6 10 6 5 5 6 6
2,5÷25 2 2
Dimensions HxWxD (mm) 71x45x42,5 74x27x47 71x45x42,5 92x35x49 95.5x45x49 95.5x45x49 71.5x80x42,5 71.5x80x42,5
N° DIN modules 2,5 1,5 2,5 2 3 3 4.5 4.5
Rated service voltage Ue (V) 1000 Vca 1000 Vca 1000 Vca 1000 Vca 1000 Vca 1000 Vca 1000 Vca 1000 Vca
1500 Vcc 1500 Vcc 1500 Vcc 1500 Vcc 1500 Vcc 1500 Vcc 1500 Vcc 1500 Vcc
Degree of protection IP 20 20 20 20 20 20 20 20
Three-poles
Code AD1004 AD1028 AD1029 AD1027

In (A) 125 125 125 160
Icw (kA) 10 4.2 4.2 6.2
Ipk (kA) 24 25 25 20
Version poli 4.2 4 4 4
Installation DIN35/plate DIN35/plate DIN35/plate DIN35
2
Power supply Ø cable (mm ) min. 6 6 6 10
max 35 25 with cable terminal 25 with cable terminal 50
N°outgoing feeder Ø cable (mm2) 1/6 5/phase
1.5/6 4/neutral
1.5/10 2/phase 7 9
6/neutral
1.5/16 2
2.5/16 8
6/25 2 2 3
Dimensions HxWxD (mm) 74.5x98x45 93x89x48 96x126x48 90x160.5x50
N° DIN modules 5,5 5 7 9
Rated service voltage Ue (V) 1000 Vca 440 440 440
1500 Vcc
Degree of protection IP 20 20 20 20
(1)
possibility of putting in parallel with AD1083 connections.
(2)
possibility of putting in parallel with comb type connections (not supplied).

Gemini switchboards
Unifix L
Technical characteristics Unifix L
Rated service voltage (Ue) 400V AC
2 Rated insulation voltage (Ui) 500V AC
Rated impulse withstand voltage (Uimp) 6kV
Rated frequency 50/60Hz
Rated current (In) central power supply 100A
lateral power supply 80A
Rated short-time withstand current (Icw)
Maximum peak current (Ipk)
Maximum installable circuit-breaker size 100A
Connections (L1-L2-L3-N) for System Pro M modular
Conditioned short-circuit Tmax T1
apparatus.
current (Icc) Tmax T2 N, S
Tmax T3
With circuit-breaker S200 6kA-400V
S200M 10kA-400V
S200P 25kA-400V
Degree of protection IP20
Characteristics of the insulating material Self-extinguishing thermoplastic V1 (UL94)
Characteristics of the conductor material Electrolytic copper
Width 12/400
(N° modules/mm)
18/500
24/600 Power supply of the busbar with 100A feeder module
without cable. Terminal capacity 35mm2.
36/800
Circuit-breaker series Unifix L

SN201 ED3272 L1/N 40A T T
DS201
ED3280 L2/N 40A
N N
ED3298 L3/N 40A

S200 ED3033 L1 100A
F200
ED3041 L2 100A
Direct power supply of the busbars by means of feeder
ED3058 L3 100A
module.
ED3066 N 100A
F660-F670-S280 (80-100A) ED3132 Power supply L1/L2/L3/N - 350mm
E200 - RS370
ED0026 Power supply L1/L2/L3/N - 1500mm
ED0025 Power supply L1/L2/L3/N - 2500mm
MDRC - Various apparatus ED3108 Power supply 2 cables L1/N 16A
ED3116 Power supply 3 cables L1/L2/L3 16A
ED3124 Power supply 4 cables L1/L2/L3/N 16A
ED3355 APower supply 2 cables L1/N 40A
ED3363 Power supply 3 cables L1/L2/L3 40A
ED3371 Power supply 42 cables L1/L2/L3/N 71A
For the DDA locks, order the false module ED2845 codes separately Power supply by means of modules and cables in
according to the size of the residual current lock parallel.

Gemini switchboards
Ordering codes
Structures
Boxes and doors
- Available in 6 sizes
- Single order code combined with box and transparent and opaque door
- Pack with door dismounted and wrapped separately 2
- Door designed so that it can be hooked onto hinges at both vertical sides and mounted without the use of tools
- To be mounted to the wall using internal holes or fixing brackets supplied as accessories
- Door opening at an angle of more than 180°
- RAL 7035 grey color
- Doors supplied with 2 standard double bit locks (3 for sizes 5 and 6) that can be replaced with locks for ciphered
key or with square/triangular impression (the standard triplex key is suitable for use with three types of impressions).
Structure with transparent door

N° vertical Useful
mod. dimensions Package/
Size H=150mm WxHxD (mm) Code No. of pieces
1 2 250x300x180 1SL0211A00 1/1
2 3 375x450x230 1SL0212A00 1/1
3 4 375x600x230 1SL0213A00 1/1
4 4 500x600x230 1SL0214A00 1/1
5 5 500x750x330 1SL0215A00 1/1
6 6 750x900x330 1SL0216A00 1/1
Structure with blind door

N° vertical
mod. Useful dimensions Package/
1 2 250x300x180 1SL0201A00 1/1
2 3 375x450x230 1SL0202A00 1/1
3 4 375x600x230 1SL0203A00 1/1
4 4 500x600x230 1SL0204A00 1/1
5 5 500x750x330 1SL0205A00 1/1
6 6 750x900x330 1SL0206A00 1/1
Single box
N° vertical
1 2 250x300x180 1SL0221A00 1/1
2 3 375x450x230 1SL0222A00 1/1
3 4 375x600x230 1SL0223A00 1/1
4 4 500x600x230 1SL0224A00 1/1
5 5 500x750x330 1SL0225A00 1/1
6 6 750x900x330 1SL0226A00 1/1
> Rapid selection table page 2/4 > In-depth technical information page 6/1 > Overall dimensions page 7/1

Gemini switchboards
Ordering codes
Structures
Frontal door
Transparent door
2 N° vertical
1 2 250x300x180 1SL0241A00 1/1
2 3 375x450x230 1SL0242A00 1/1
3 4 375x600x230 1SL0243A00 1/1
4 4 500x600x230 1SL0244A00 1/1
5 5 500x750x330 1SL0245A00 1/1
6 6 750x900x330 1SL0246A00 1/1
Opaque door
N° vertical
1 2 250x300x180 1SL0231A00 1/1
2 3 375x450x230 1SL0232A00 1/1
3 4 375x600x230 1SL0233A00 1/1
4 4 500x600x230 1SL0234A00 1/1
5 5 500x750x330 1SL0235A00 1/1
6 6 750x900x330 1SL0236A00 1/1
Inner doors
- Made in insulating material
- IP30 degree of protection with door open
- Designed so that door can be hinged onto both vertical sides
- Snap-on mounting and fixing
Inner doors
N° vertical
1 2 250x300x180 1SL0251A00 1/1
2 3 375x450x230 1SL0252A00 1/1
3 4 375x600x230 1SL0253A00 1/1
4 4 500x600x230 1SL0254A00 1/1
5 5 500x750x330 1SL0255A00 1/1
6 6 750x900x330 1SL0256A00 1/1

Completion of structure
Uprights
- Incorporated vertical wiring duct (ABB patent)
- Snap-on mounting of all components (installation pitch of 75 mm)
2
- Snap-on insertion into box
- Depth of installed components adjusted at a pitch of 12.5 mm (4 positions for uprights of size 1 and 6 positions
for the remaining ones)
- Ergonomic grip to make it easy to insert and extract
Upright with integrated wiring duct
Useful dimensions Package/
Size H (mm) Code No. of pieces
1 300 1SL0283A00 1/4
2 450 1SL0284A00 1/4
3 600 1SL0285A00 1/4
4/5 750 1SL0286A00 1/4
6 900 1SL0287A00 1/4
1SL0313A00
1SL0314A00 DIN rail kit
1SL0315A00
- Supplied with DIN rail complete with supports to snap onto uprights and adjustable in depth
- Available in 1 module (H 150 mm) and 1+1/2 module (H 225 mm, sizes 2-6) dimensions
- Designed to be hinged onto both vertical sides
- Snap-on mounting onto uprights (in compliance with reference Standards a tool must be used for removing the
panel)
- Document pocket for storing descriptions of installed devices
225 Panel + DIN rail

Dimensions Package/
Size W (mm) Code No. of pieces
1 module
1 300 1SL0307A00 1/8
150 2/3 450 1SL0308A00 1/8
1SL0307A00 4/5 750 1SL0309A00 1/8
1SL0308A00
1SL0309A00 6 900 1SL0310A00 1/8
1SL0310A00
1+1/2 modules
2/3 450 1SL0313A00 1/8
4/5 750 1SL0314A00 1/8
6 900 1SL0315A00 1/8
DIN rail
- Two-sided version
- Supplied with mounting supports that snap onto uprights
- Depth adjustment on uprights
- Designed so that rapid Unifix L mounting bars can be snapped on
DIN rail
N° horiz. Dimensions Package/
Size mod. W (mm) Code No. of pieces
1 12 210 1SL0290A00 1/10
2/3 18 318 1SL0291A00 1/10
4/5 24 443 1SL0292A00 1/10
6 36 663 1SL0293A00 1/10

Gemini switchboards
Ordering codes
1SL0336A00 Kit for installing Tmax moulded-case circuit breakers
1SL0337A00
1SL0338A00 - For installing Tmax moulded-case circuit breakers in fixed version with front terminals
2 - Composed of a plate with special drilled holes and a protection panel with vertical slots that can be hinged on
both sides and snap-on mounted (in compliance with reference Standards a tool must be used for removing the
panel)
- Available for sizes 2-6
- Version H 150 with drillings for Tmax T1 3 poles (with and without residual current releaser), Tmax T1 4 poles
150 (with and without residual current releaser), Tmax T2 3 poles (with and without residual current releaser), Tmax
T2 4 poles (without residual current releaser)
- Version H 300 with drillings for Tmax T2 4 poles (with residual current releaser), Tmax T3 3 poles (with and without
residual current releaser), Tmax T3 4 poles (with and without residual current releaser)
- Snap-on mounting onto uprights with the possibility of adjusting the plate depth
300
1SL0370A00
1SL0371A00 Panel + plate
1SL0372A00
Dimensions Package/
1 module H=150mm
2/3 375 1SL0336A00 1/4
4/5 500 1SL0337A00 1/4
6 700 1SL0338A00 1/2
2 modules H=300mm
2/3 375 1SL0370A00 1/4
4/5 500 1SL0371A00 1/4
6 700 1SL0372A00 1/2
When choosing the correct kit, see table on page 2/8.
Kit for installing Tmax XT moulded-case circuit breakers

- For installing Tmax moulded-case circuit breakers in fixed version with front terminals
- Composed of a plate with special drilled holes and a protection panel with vertical slots that can be hinged on
both sides and snap-on mounted (in compliance with reference Standards a tool must be used for removing the
panel)
- Available for sizes 2-6
- Snap-on mounting onto uprights with the possibility of adjusting the plate depth
Panel + plate
Dimensions Package/
1 module H=150mm
2/3 375 1SL0373A00 1/4
4/5 500 1SL0374A00 1/4
6 700 1SL0375A00 1/2
2 modules H=300mm
2/3 375 1SL0376A00 1/4
4/5 500 1SL0377A00 1/4
6 700 1SL0378A00 1/2

1SL0296A00 Partial modular plates
1SL0297A00
1SL0298A00 - Available in 1 module (H 150 mm) and 2 module (H 300 mm, sizes 2-6) dimensions
1SL0299A00
- Snap-on mounting onto uprights with depth adjustment 2
Partial modular plates
Dimensions Package/
1 module H=150mm
150
1 210 1SL0296A00 1/6
2/3 318 1SL0297A00 1/4
300 4/5 443 1SL0298A00 1/4
1SL0302A00 6 663 1SL0299A00 1/2

1SL0303A00 2 modules H=300mm
1SL0304A00
2/3 318 1SL0302A00 1/4
4/5 443 1SL0303A00 1/4
6 663 1SL0304A00 1/2
1SL0318A00 Blank panels

1SL0319A00
1SL0320A00 - Available in 1/2 module (H 75 mm), 1 module (H 150 mm) and 2 modules (H 300 mm) dimensions
1SL0321A00
- H 150 mm and H 300 panels designed to be hinged onto both vertical sides
1SL0324A00
1SL0325A00 - Snap-on mounting onto uprights (in compliance with reference Standards a tool must be used for removing the
1SL0326A00 panel)
1SL0327A00
Blind front panels

Dimensions Package/
75
1/2 module H=75mm
1 250 1SL0318A00 1/10
150
2/3 375 1SL0319A00 1/10
4/5 500 1SL0320A00 1/6
300
6 700 1SL0321A00 1/4
1SL0330A00 1 module H=150mm
1SL0331A00
1SL0332A00 1 250 1SL0324A00 1/8
1SL0333A00
2/3 375 1SL0325A00 1/8
4/5 500 1SL0326A00 1/4
6 700 1SL0327A00 1/4
2 modules H=200mm
1 250 1SL0330A00 1/6
2/3 375 1SL0331A00 1/6
4/5 500 1SL0332A00 1/4
6 700 1SL0333A00 1/4

Gemini switchboards
Ordering codes
1SL0353A00 Wiring kit
1SL0354A00
1SL0355A00 - Composed of wiring duct in versions 25x60 mm and 40x60 mm (WxH, 8-12 mm slots) and Fix-O-Rapid device
2 1SL0356A00
for the rapid snap-on hooking of the ducts on the DIN rail
- Snap-on mounting on uprights with depth adjustment
Wiring duct + Fix-O-Rapid

Dimensions Package/
Wiring 25x60mm
1 250 1SL0353A00 1/4
2/3 375 1SL0354A00 1/4
1SL0353A00 4/5 500 1SL0355A00 1/4

1SL0354A00
1SL0355A00 6 700 1SL0356A00 1/4
1SL0356A00
Wiring 40x60mm
1 250 1SL0360A00 1/4
2/3 375 1SL0361A00 1/4
4/5 500 1SL0362A00 1/4
6 700 1SL0363A00 1/4
Fix-O-Rapid
Rapid mounting device for attaching wiring ducts to the base plate: it snaps onto the plate after drilling a ø 7 mm hole.
Two Fix-O-Rapid devices are enough for each wiring duct section.
Fix-O-Rapid guarantees maximum insulation since it does not involve the use of any metal component inside the
wiring duct.
If the wrong wiring duct is selected, it can be dismounted and a version with the same base and a different height
can be attached to the Fix-O-Rapid.
Package/
No. of
Description Code pieces
Rapid mounting device for wiring duct, W 25mm 05 270 20/600

Base plates
1SL0259A00
1SL0260A00 - Available in three versions in blank or drilled metal and insulating material
1SL0261A00
1SL0262A00 - Positioning at 3 different depths for size 1, 4 different depths for sizes 2-3-4 and 7 different depths for sizes 5-6 2
1SL0263A00 (adjustments with 30 mm pitch)
1SL0264A00
- Supplied with feet and hooks adjustable at three further positions (with 7.5 mm pitch)
- Snap-on mounting
2
- Plates can also be mounted directly on the base with the special kit
Base plate
1SL0275A00 Panel Dimensions Package/

1SL0276A00 Size WxHxD (mm) Code No. of pieces
1SL0277A00
1SL0278A00 In blank metal
1SL0279A00
1SL0280A00 1 250x300x180 1SL0259A00 1/6
2 375x450x230 1SL0260A00 1/6
2
3 375x600x230 1SL0261A00 1/4
4 500x600x230 1SL0262A00 1/4
5 500x750x330 1SL0263A00 1/4
6 750x900x330 1SL0264A00 1/2
1SL0267A00
1SL0268A00 In drilled metal
1SL0269A00 1 250x300x180 1SL0275A00 1/6
1SL0270A00
1SL0271A00 2 375x450x230 1SL0276A00 1/6
1SL0272A00
3 375x600x230 1SL0277A00 1/4
5 4 500x600x230 1SL0278A00 1/4
5 500x750x330 1SL0279A00 1/4
6 750x900x330 1SL0280A00 1/2
Insulating material
1 250x300x180 1SL0267A00 1/6
2 375x450x230 1SL0268A00 1/6
3 375x600x230 1SL0269A00 1/4
4 500x600x230 1SL0270A00 1/4
5 500x750x330 1SL0271A00 1/4
6 750x900x330 1SL0272A00 1/2
Base mounting kit for metal plate

Package/
Description Code No. of pieces
Base mounting kit for metal 1/10
1SL0383A00
plate

Gemini switchboards
Ordering codes
Distribution system
ED…. Unifix L
Dimensions Package/
2 Description W (mm) Code No. of pieces
2-poles busbars
100A 2P 8 module busbar 400 ED2993 1/6
2 poles 4 poles 100A 2P 36 module busbar
N L1 N L1 L2 L3
Connections for various apparatus
ED3066 Connection with 2 conductors L/N 16A ED3108 1/6
ED3033
ED3041
Connection with 3 conductors L1/L2/L3 16A ED3116 1/6
ED3058 Connection with 4 conductors L1/L2/L3/N 16A
ED3124 1/6
single phase
Connection with 2 conductors L1/N 40A ED3355 1/6
Connection with 4 conductors L1/L2/L3/N 40A ED3371 1/6
Connections for apparatus
N°10 connections L1-N 40 A ED3272 1/10
ED3104 N°10 connections L2-N 40 A ED3280 1/10
ED3101
ED3102 N°10 connections L3-N 40 A ED3298 1/10
ED3103 N°10 connections L 1 100A ED3033 1/10
N°10 connections L 2 100A ED3041 1/10
N°10 connections L 3 100A ED3058 1/10
N°10 connections N 100A ED3066 1/10
Feeder with 4P 100A cable (W=350mm) ED3132 1/1
Power supply modules with cable
Parallel module 2P 100A with cable (W=600mm) ED3082 1/1
400 350
600 1500 Parallel module 4P 100A with cable (W=600mm) ED3090 1/1
800 2500
1500 Parallel module 4P 100A with cable (W=800mm) ED3413 1/1
Power supply modules without cable In 100A
N°10 single-pole power supply terminals L1 ED3101 1/10
N°10 single-pole power supply terminals N ED3104 1/10
ED3090 ED3132 ED3124 Accessories
ED3405 ED0026
ED3413 ED0025 N°10 busbar covers W=600mm ED2961 1/10
ED3439
N°2 busbar covers W=800mm ED2962 1/2

Accessories
Locks
Available in three versions with ciphered key and handle, with triangular and square impressions
Package/
2
1SL0340A00
1SL0341A00 Description Code No. of pieces
1SL0339A00 Gemini standard lock 1SL0459A00 1/10
Lock with Yale type coded key and
1SL0340A00 1/10
handle
Lock with triangular impression 1SL0341A00 1/10
1SL0458A00 1SL0342A00
Lock with square impression 1SL0339A00 1/10
Kit for vandalproof closure 1SL0458A00 1/10
Mounting elements
Guarantee optimum wall, pole and floor mounting conditions
1SL0343A00 Package/
1SL0344A00
1SL0345A00
1SL0346A00 Plastic brackets (4 pieces) for horizontal
1SL0342A00
and vertical wall mounting (*) 1/10
Metal brackets (4 pieces) for horizontal
1SL0401A00
and vertical wall mounting 1/10
Pole mounting kit for sizes 1
1SL0343A00
switchboards 1/4
Pole mounting kit for sizes 2-3
1SL0344A00
switchboards 1/4
Pole mounting kit for sizes 4-5
1SL0345A00
switchboards 1/2
Pole mounting kit for size 6
1SL0346A00
1SL0352A00 switchboards 1/2
Floor mounting pedestal for sizes 1-4 1SL0352A00 1/1
(*)
Types of inserts are provided to adapt the ø 6 and 8 mm fixing brackets
(*)
The kit consists of 2 elements for mounting in the upper and lower parts of the switchboard.
1SL0385A00
1SL0386A00
1SL0387A00
1SL0388A00
1SL0390A00
Base cover
For aesthetic as well as functional purposes, in particular for pedestal installations
Package/
Size Description Code No. of pieces
1 Back plugging plate 1SL0385A00 1/4

Gemini switchboards
Ordering codes
Accessories
Pedestal
This enables the Gemini switchboard to be secured to the ground without the need to build plinths or foundations
2 in cement since it is the pedestal that is buried.
Package/
4 Gemini Pedestal size 4 1SL0464A00 1/1
Coupling kit
Follows the aesthetic outline of the boxes. On request, contact ABB for minimum order quantities.
Package/
2/3 Vertical coupling kit for sizes 1SL0413A00 1/2
4 Vertical coupling kit for sizes 1SL0414A00 1/2
1SL0413A00
1SL0414A00
1SL0415A00
1SL0416A00
Bottom base H 30
For fixing the Gemini switchboard directly to the floor
Package/
2/3 Bottom base 1SL0423A00 1/2
1SL0423A00
1SL0424A00
4 Bottom base 1SL0424A00 1/2
1SL0425A00 5 Bottom base 1SL0425A00 1/2
1SL0426A00
6 Bottom base 1SL0426A00 1/2

Accessories
Fixed frame
In combination with bottom base H 30. For fixing onto poured concrete floors and bases.
2
Package/
2/3 Frame for fixing to floor 1SL0433A00 1/2
4 Frame for fixing to floor 1SL0434A00 1/2
5 Frame for fixing to floor 1SL0435A00 1/2
1SL0433A00 6 Frame for fixing to floor 1SL0436A00 1/2
1SL0434A00
1SL0435A00
1SL0436A00
Full covers
Package/
Full cover for size 1 switchboards 1SL0451A00 1/1
Full cover for size 2-3 switchboards 1SL0452A00 1/1
1SL0451A00 Full cover for size 4 switchboards 1SL0454A00 1/1
1SL0452A00
1SL0455A00
Ventilation kit IP21/54

- Composed of plastic grilles (ABS self-extinguishing UL94V0) and filter
EN0105K - Degree of protection without filter IP21
EN0150K - Degree of protection with filter IP54
EN0204K
- Equipped with pre-mounted gasket
Dimensions Package/
Description WxW (mm) Code No. of pieces
Grille + air filter kit 105x105 EN0105K 1/1
Grille + air filter kit
150x150 EN0150K 1/1
(cannot be used with Size 1
Grille + air filter kit
204x204 EN0204K 1/1
(cannot be used with Size 1
Screws not included, use 4 self-tapping screws 2.9x13 or order Code 1SL0384A00

Gemini switchboards
Ordering codes
Accessories
Anti-condensation kit
- Kit made of special material to prevent condensation from forming inside the switchboard: it includes
2 GORETM MEMBRANE VENTING
- Impermeable to water (pressure): 0.6 bar/60 sec.
- Air flow: 400 ml/min. (dp = 70 mbar)
- 1 kit for sizes 1-2, 2 kits for sizes 3-4 and 3 kits for sizes 5-6 are recommended to guarantee adequate dissipa-
1SL0351A00 tion. In any case the number of kits to be installed depends on the number and type of devices installed inside
the switchboard.
Package/
Anti-condensation kit 1SL0351A00 1/6
Horizontal Gemini kit

Kit to use for opening switchboard upwards in correct manner.
Package/
Horizontal Gemini Kit size 2 1SL0470A00 1/1
Horizontal Gemini Kit size 3/4 1SL0471A00 1/1
Other accessories
Package/
Universal drill bit 12 849 1/30
Module covers in grey RAL 7035, 4 mo-
12 863 25/300
dules
Deep adapters 12 851 10/80
Small bag containing base plates 1SL0380A00 1/10
Small bag containing DIN supports 1SL0381A00 1/10
Small bag containing partial plate 1SL0382A00 1/10
Small bag containing screws and inserts 1SL0397A00 1/10
Small bag containing ventilation kit fastening
1SL0384A00 10/50
screws
Spare spanner 1SL0457A00 1/10

Gemini switchboards
Examples of configurations
Gemini switchboards 12 mod. DIN dim.300x250x180 (400x335x210) mm (external

hxwxd) IP66
Description Code Q.ty
Box + transparent door 1SL0211A00 1
2
No. 2 uprights 1SL0283A00 1
DIN rail kit (DIN rail + panel) H=150mm 1SL0307A00 2

hxwxd) IP66
Prezzo
Description Code Articolo EUR Q.ty
Modular plate 1 mod.DIN H=150mm 1SL0297A00 1
Blank panel 1 mod.DIN H=150mm 1SL0325A00 1
DIN rail kit (DIN rail+panel) 1+1/2 mod.
1SL0313A00 1
H=225mm
Blank panel 1/2 mod. H=75mm 1SL0319A00 1
Module covers 12863 1

hxwxd) IP66
Prezzo
Description Code Articolo EUR Q.ty
Kit for Tmax H=150mm 1SL0336A00 1
DIN rail kit (DIN rail + panel) 1 mod.
1SL0308A00 2
H=150mm
DIN rail 1SL0291A00 1
Blank panel 1 mod. DIN H=150mm 1SL0325A00 1

Gemini switchboards

hxwxd) IP66
2
DIN rail kit (DIN rail+panel) 1 mod.
1SL0309A00 3
H=150mm
Blank panel 1 mod. H=150mm 1SL0326A00 1
Wiring kit (Fix-O-rapid+wiring duct
1SL0355A00 2
25x60mm)
DIN rail 1SL0292A00 1

hxwxd) IP66

Kit for Tmax H=150mm 1SL0337A00 1
Modular plate H=300mm 1SL0303A00 1
Blank panel H=300mm 1SL0332A00 1
DIN rail kit (DIN rail+panel) 1+1/2 mod.
1SL0314A00 1
H=225mm
Front blind panel 1/2 mod. H=75mm 1SL0320A00 1
Gemini switchboard 36 mod. DIN dim.900x750x330 (1005x840x360) mm (external

hxwxd) IP66
Modular plate H=300mm 1SL0304A00 1
Blank panel H=300mm 1SL0333A00 1
DIN rail kit (DIN rail + panel) 1+1/2 mod.
1SL0315A00 1
H=225mm
Blank panel 1/2 mod. H=75mm 1SL0321A00 1
DIN rail kit (DIN rail+panel) 1 mod.
1SL0310A00 2
H=150mm
1SL0356A00 1
25x60mm)
1SL0363A00 1
40x60mm)

General 3/2
Distribution systems 3/13
Ordering codes 3/22

General
The ArTu L range is composed of structures consisting of modular kits which can be
built up in different combinations able to cover applications of terminal distribution
switchgear, both wall-mounted up to 400 A and floor-standing up to 800 A.
The overall dimensions are reduced thanks to the depth of just Apart from in the traditional plain and pre-drilled versions with 200
200 mm for the former and 240 mm for the latter. Both versions mm height, the modular panels are also available in the 150 mm
can be placed side-by-side with other structures and with cable height, which allows optimisation of the space available.
3
risers with a width of 300 mm. Cabling becomes simpler, thanks to the structure which is
Modular apparatus of the System pro M series, moulded-case * completely open: in fact, it is possible to conveniently carry out
T series up to T6 800 A, XT series up to XT4, (fixed version with cabling horizontally on trestles inside the workshop or on the
front terminals) circuit-breakers are housed inside the ArTu L building site with the switchgear completely open and then only
switchgear, with a capacity of 24 or 36 modules per row. complete its assembly when cabling has been completed.

It is possible to use the rapid Unifix (H and L) cabling system. The degree of protection goes from IP31, for the versions without
Furthermore, the kit for fixing the circuit-breakers further simplifies door, up to IP43 for the versions with door.
the job, thanks to the practical rapid snap-on hooking up system Lateral access is guaranteed, as is the possibility of mounting the
and the standardised small items. vertical wiring duct both on the right, on the left and horizontally.
The 400 and 800A busbar system with shaped section, with An accessory box is available, to be placed above the switchgear
prefabricated connections between circuit-breakers and busbars roof, which increases the space available for the incoming cables
placed in the various situations can be used. It is always possible and, together with the distribution frame, makes distribution
3
to use the traditional flat busbars for capacities up to 630A. simpler. The maximum form of segregation, which can be
obtained, is type 2.
Wiring becomes A system of

easier thanks to busbars
the completely of 400 and 800A
open with shaped
structure, and it is section
in fact possible to can be used with
wire without prefabricated
problems connections
horizontally between
on trestles. circuit-breakers and
busbars
placed in the
different
situations.
Wall-mounted Floor-standing
D=204mm D=240mm
Compliance with Standards CEI EN 60439-1/IEC 61439-1-2 CEI EN 60439-1/IEC 61439-1-2
Rated service voltage Ue up to 690 V up to 690 V
Rated insulation voltage Ui up to 1000 V up to 1000 V
Rated frequency 50-60 Hz 50-60 Hz
Rated impulse withstand voltage Uimp 6 kV 8 kV
Rated current In up to 400 A up to 800 A
Rated short-time short-circuit withstand current Icw up to 25 kA up to 35 kA
peak current Ipk up to 52.5 kA up to 74 kA
Degree of protection IP 31 without door 31 without door
43 with door 43 with door


24/36 mod. 24/36 mod. (690/890) (D)
50 600/800 D
150 200
150
200
50
H (H)
3
Blind
side cover
Structures
No. vert.
mod. No. installable No. installable External overall Functional Wall-mounted back Floor-standing back
H=100mm DIN modules DIN modules dimensions (1) dimensions (2) of structure (3) of structure Side cover
DIN panel DIN panel
24/36 modules 24/36 modules (H) (W) (D) H W D (4) Including roof and Including roof and
H=150mm H=200mm mm mm mm mm mm mm base base Blind
6 96 (24x4) 72 (24x3) 650 600 SL0600 MC0600
8 120 (24x5) 96 (24x4) 850 800 SL0800 MC0800
10 144 (24x6) 120 (24x5) 1050 690 204 1000 600 165 SL1000 MC1000
12 192 (24x8) 144 (24x6) 1250 1200 SL1200 MC1200
14 216 (24x9) 168 (24x7) 1550 1400 SL1400 MC1400
16 240 (24x10) 192 (24x8) 1750 1600 SL1600 MC1600
18 288 (24x12) 216 (24x9) 1950 690 240 1800 600 195 SL1800 MC1800
20 312 (24x13) 240 (24x10) 2150 2000 SL2000 MC2000
14 324 (36x9) 252 (36x7) 1550 1400 SL1408 MC1400
16 360 (36x10) 288 (36x8) 1750 1600 SL1608 MC1600
18 432 (36x12) 324 (36x9) 1950 890 240 1800 800 195 SL1808 MC1800
20 468 (36x13) 360 (36x10) 2150 2000 SL2008 MC2000
(390) (D)
300 D
H (H)
Additional cable container

External overall Functional Wall-mounted Floor-mounted Front door
dimensions (1) dimensions (2) cable container (3)
cable container IP43
(H) (W) (D) H W D (4) Including roof Including roof
mm mm mm mm mm mm and base and base Plain door
650 600 VC0600 PC0602
850 800 VC0800 PC0802
390 204 300 165
1050 1000 VC1000 PC1002
1250 1200 VC1200 PC1202
1550 1400 VC1400 PC1402
1750 1600 VC1600 PC1602
390 240 300 195
1950 1800 VC1800 PC1802
2150 2000 VC2000 PC2002

24/36 mod. 24 mod.
Removable
side panel 3
ZL1000 ZL1001 ZL3000
Intermediate IP43 Internal cable Connection IP31 Finishing

Side cover Base strip uprights Base strip front doors container box section
Angle for Glass door
With removable For side-by-side side-by-side Glass door 24 mod. + int Blind door
panel Angles Flanges positioning structures 24/36 mod. cable container 24/36 mod. Roof
MI0600 PV0600 PC0601
MI0800 PV0800 PC0801
MI1000 PV1000 PC1001
MI1200 PV1200 PC1201
LF1400 MI1400 PV1400 PC1401
LF1600 MI1600 PV1600 PC1601 See page
ZL1000 ZL1001 ZL3000 RC1000
LF1800 MI1800 PV1800 PC1801 3/28
LF2000 MI2000 PV2000 PC2001

LF1400 MI1400 PV1436 PV1424 PC1436 VC1425
LF1600 MI1600 PV1636 PV1624 PC1636 VC1625
ZL1000 ZL1101 ZL3000
LF1800 MI1800 PV1836 PV1824 PC1836 VC1825
LF2000 MI2000 PV2036 PV2024 PC2035 VC2025
ZL1000 ZL2001
(1)
The external overall dimensions of
Internal Connection Finishing floor-mounted ArTu L switchgear
doors Base strip box section IP31 include the palletisable base strip
h=100mm (angle and flanges to be
ordered separately).
Plain door Angles Flanges Roof
(2)
The functional dimensions represent
the useful space for installing the
apparatus.
(3)
The wall-mounted structures cannot
be superimposed.
(4)
In this catalogue, reference is always
See page 3/28 made to the 204/240mm depth
PO1431
corresponding respectively to the
PO1631 overall dimensions with front door.
ZL1000 ZL2001 RC2000 The useful dimensions between
PO1831 panel and back of the structure are
PO2031 165/195mm.

Recommended solutions for installation of the apparatus

Type of structure/Installation
Wall Floor Connection
structures structures box
Vertical Vertical
Apparatus on DIN rail Vertical Horizontal on DIN rail Vertical Vertical Horizontal
Pro M System modular apparatus
3
OT
OESA
OETL
Tmax T1 3/4 poles - fixed / front terminals ()
Tmax T1 4 poles - fixed / front terminals + RC mod. ()
Tmax T3 3/4 poles - fixed / front terminals () ()
Tmax T3 3/4 poles - fixed / front terminals + divider
Tmax T4 4 poles - fixed / front terminals + RC mod.
Tmax T6 3/4 poles - fixed / front terminals
Side-by-side Tmax kits
Tmax XT1 3/4 poles - fxed / front terminals ()
Tmax XT1 4 poles - fxed / front terminals + RC mod. ()
Tmax XT2 3/4 poles - fxed / front terminals
Tmax XT2 4 poles - fxed / front terminals + RC mod.
Tmax XT3 3/4 poles - fxed / front terminals () ()
Tmax XT3 4 poles - fxed / front terminals + RC mod. ()
Tmax XT4 3/4 poles - fxed / front terminals ()
Tmax XT4 4 poles - fxed / front terminals + RC mod.
Side-by-side Tmax XT kits
Busbars with shaped Linear busbar holder () ()

section
Scaled busbar holder ()
Flat busbar Linear busbar holder () ()
Unifix L
Unifix H
() Can also be installed in the additional cable container.

() Can only be installed in the additional cable container.

Kit for System Pro M, ≤160 OT modular apparatus, Tmax T1-T2-T3, XT1 and XT3, and
supports for Unifix H AD1086
PM6672
AD1086
PM3872
PM3648
PM1500
AD1600
GD1520
GD1530 PM1536 3
W=300mm W=600mm W=800mm

Panel Panel Panel Panel Panel Panel
H DIN rail kit 1 DIN row DIN rail kit 1 DIN row 2 DIN row 3 DIN row DIN rail kit 1 DIN row 2 DIN row
(mm) 12 mod.DIN 12 mod.DIN 24 mod.DIN 24 mod.DIN 48 mod.DIN 72 mod.DIN 36 mod.DIN 36 mod.DIN 72 mod.DIN
Standard alluminium version
Floor Wall
150 (1) GD1520 PM1500 GD1530 PM1536
200 GD1512 GD1515 PM2612 GD1520 PM2624 GD1530 PM2836
300 (2) GD1520 PM2312 GD1530 PM2315
300 2x GD1520 PM3648 (1) 2x GD1530 PM3872 (1)
600 3x GD1520 PM6672
Unifix H fixing brackets
300 AD1097 PM3624 AD1097 PM3836
(1)
Only for modular System Pro M
(2)
Version for Tmax with differential module underplaced RC 221/222.
Completion items for installation on DIN rail

Screw fixing of ducts up to 100x100mm. Supports for horizontal wiring duct
AD1096
0527. 05198 (100x100) AD1098 Allows assembly of the cabling wiring duct horizontally and vertically up
to 100x100mm (in the case of installation in floor-mounted structure with
removable side panel LF.... the vertical wiring duct has maximum dimensions
of 100x80mm hxw). The support AD1098 has compensation drillings as the
height and width of the wiring duct varies. The accessory is also prepared
with ø7mm holes for assembly of the ABB wiring duct by means of the
OF
F
OF
Fix-O-rapid hook.
F
05 258
OF
F
Code Description
05198 (100x100) AD1096 Support for horizontal/vertical wall-mounted wiring duct
AD1098 Support for horizontal/vertical floor-mounted wiring duct
Fixing with rapid hooking base of ducts
up to 100x100mm.
AD1096
05198 (100x100) AD1098 Depth adapter
Code Description
AP6000 Depth adapter W=600mm for side-by-side Pro M - Tmax T1-T2-T3-XT1- XT3
OF
Polished flange for Tmax XT2-XT4 positioned side by
F
side on plate
OF
F
OF
F
Code Description
AP6000 05198 (100x100) AD3310 AD3310 Polished flange for plate-mounted XT2 3P
AD3311 AD3311 Polished flange for plate-mounted XT2 4P
DIN cut-out hole covers AD3312 AD3312 Polished flange for plate-mounted XT4 3P
Code Description
Tmax XT2-XT4 on DIN rail cannot be mounted in ArTu switchboards.
AD1086 Hole covering strip DIN W=2000mm - grey RAL 7035
AD1088 Hole covering strip DIN 24 modules - grey RAL 7035
AD1089 Hole covering strip DIN 36 modules - grey RAL 7035

Fixed
Wall-mounted structures Floor-mounted structures
Circuit-breaker No. Dimensions Structure 24 DIN mod. Structure 24 DIN mod. Structure 36 DIN mod.
front terminals poles H (mm) W=600mm W=600mm W=800mm
Tmax T1 3-4 200 LK1000 LK1000 LK1100
(1) (1)
Tmax T1 CB + RC mod. 4 200 LK1004 LK1004 LK1104 (1)
Tmax T2 3-4 200 LK2000 LK2000 LK2100
Tmax T2 CB + RC mod. 4 200 LK2004 LK2004 LK2104
Tmax T3 3-4 200 LK3000 LK3000 LK3110
Tmax T3 CB + distr. frame 3-4 200 LK3301
Tmax T4 3-4 200 LK4003 LK4003 LK4103
Tmax T5 3-4 300 LK5003 LK5003 LK5103
Tmax XT1 3(2)/4 200 LX1000 LX1000 LX1100
Tmax XT1 CB + RC mod. 4 200 LX1005 LX1005 LX1104
Tmax XT2 3(2)/4 200 LX2000 LX2000
Tmax XT2 CB + RC mod. 4 200 LX2004 LX2004
Tmax XT3 3(2)/4 200 LX3000 LX3000 LX3110
Tmax XT3 CB + RC mod. 4 300 LX3004 LX3004 LX3104
Tmax XT4 3(2)/4 200 LX4003 LX4003
Tmax XT4 CB + RC mod. 4 200 LX4004 LX4004
(1)
(2)
For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting -
AD3308 XT4 3P Flange for plate-mounting.

Fixed
Circuit-breaker No. Dimensions Structure 24 DIN mod. Cable container side Structure 24 DIN mod. Structure 36 DIN mod. Cable container side
front terminals poles H (mm) W=600mm by side W=300mm W=600mm W=800mm by side W=300mm
Tmax T1-T2-T3-XT1-XT3 on DIN ral 200 (see page 3/6) (vedere pag. 3/6) (vedere pag. 3/6) (vedere pag. 3/6)
Tmax T1 3-4 200 LK1001 LK1001 LK1101 LK1002
Tmax T1 CB+RC mod. 4 300 LK1008 (1)
Tmax T1 No.4 CBs side by side 3-4 200 LK4100 LK4100 LK4108*
Tmax T2 No.3 CBs side by side 3 200 LK2001 LK2001 LK2101 LK2002
Tmax T2 CB+RC mod. 4 300 LK2008
Tmax T2 No.4 CBs side by side 3-4 200 LK3200 LK3200 LK3111**
Tmax T3 3-4 300 LK3001 LK3003 LK3001 LK3101 LK3002
Tmax T3 CB+RC mod. 4 300 LK3005 LK3005 LK3105 LK3008
Tmax T3 No.3 CBs side by side 3-4 300 LK3300 LK3300 LK3102**
Tmax T4 3-4 400 LK4005 LK4005 LK4105 LK4007
Tmax T4 CB+RC mod. 4 500 LK4006 LK4006 LK4106
Tmax T5 3-4 400 LK5005 LK5005 LK5105 LK5007
Tmax T5 CB+RC mod. 4 500 LK5006 LK5006 LK5106 LK5008
Tmax T6 3-4 500 LK6011 LK6012
Tmax XT1 3(2)-4 200 LX1001 LX1001 LX1101 LX1002
Tmax XT1 CB+RC mod. 4 300 LX1006 LX1006 LX1108 LX1008
Tmax XT1 No.3 CBs side by side 3(2)-4 200 LX4100 LX4100
Tmax XT2 3-4 200 LX2001 LX2001 LX2101
Tmax XT2 3-4 300 LX2300 LX2002
Tmax XT2 CB+RC mod. 4 300 LX2008
Tmax XT2 No.3/4(3) CBs s by s 3-4(4) 200 LX3200 LX3200
Tmax XT3 3(2)-4 300 LX3001 LX3003 LX3001 LX3101 LX3002
Tmax XT3 CB+RC mod. 4 300 LX3005 LX3005 LX3105 LX3008
Tmax XT3 No.2 CBs side by side 3(2)-4 300 LX3300 LX3300
Tmax XT4 3(2)-4 300 LX4005 LX4005 LX4007
Tmax XT4 CB+RC mod. 4 400 LX4006 LX4006
Tmax XT4 No. 3/4(3) interr. affiancati 3-4(4) 300 LX4008 LX4008
* No. 5 circuit-breakers only for structures W=800mm.

** No. 4 circuit-breakers only for structures W=800mm.
(1)
(2)
For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting -
AD3308 XT4 3P Flange for plate-mounting.
(3)
No. 4 CBs side by side 3P, No. 3 CBs side by side 4P.
(4)
Order AD3310, AD3311, AD3312, AD3313.

Plain back plates, plain and ventilated panels

PF.... PC.... PR....
PA....
Back plates Panels

Plain flat Plain flat Plain recessed Ventilated
Structure Structure Cable Structure Structure Cable Structure Structure Cable Structure
H 24 DIN mod. 36 DIN mod. container 24 DIN mod. 36 DIN mod. container 24 DIN mod. 36 DIN mod. container 24 DIN mod.
(mm) W=600mm W=800mm W=300mm W=600mm W=800mm W=300mm W=600mm W=800mm W=300mm W=600mm
50 PC1050 PC0580
100 PC1600 PC1800 PC1403 PA1600
150 PC1150 PC1580
200 PF1002 PF1102 PC2600 PC2800 PC2401 PR2600 PR2800 PA2600
300 PF1003 PF1103 PC0300 PC3600 PC3800 PC3401
400 PF1004 PF1104 PC4600 PC4800 PC4401 PR4600 PR4800 PR4401
600 PF1006 PF1106 PC0600 PC6600 PC6800 PC6401 PR6600 PR6800
800 PF1008 PF1108 PC8600 PC8800 PC8401
1600 PC1660 PC1680
1800 PC1860 PC1880
2000 PC2060 PC2080
Useful internal space

Wall-mounted structure Floor-mounted structure Cable connection box
124
154
Recessed
panel 159
189 223
Flat panel
Recessed
59 panel
29 Flat panel
59
29

Kit for OT160÷400
Dimensions
(mm)
Description Code H W Pole Control Maximum handle lenght Minimum shaft lenght
Kit OT160/200/250/315/400 vertical KO1260 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12)
Kit OT160/200/250/315/400 horizontal KO1261 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12)
Panels for square measuring instruments

These allow installation of measuring instruments and relative changeover switches.
EV1135 EV1136
2-instrument panel 4-instrument panel

72x72mm 96x96mm 72x72mm 96x96mm
H 24 mod.DIN 36 mod.DIN 24 mod.DIN 36 mod.DIN 24 mod.DIN 36 mod.DIN 24 mod.DIN 36 mod.DIN
(mm) W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm
200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS4960 PS4968
Square instrument hole covers

Code Description
EV1135 Hole cover of 72x72mm instrument black RAL 9005
EV1136 EV1136 Hole cover of 96x96mm instrument black RAL 9005

Installation of terminal boxes on DIN rail
AD1099
AD1099
3
AA1001
Terminal box mounting position

Installation on DIN rail Structure Internal cable container Cable container side-by-side Box
Horizontal AD1099
Horizontal angled 45° AA1001
Vertical AD1005 AD1099
Installation of terminal boxes on DIN rail and earthing busbar
EV1110 EV1112
EV1119
Angled supports for terminal boxes and earthing busbar

Code Description
EV1110-EV2110 Angled supports 1 row of terminals
EV1112-EV2112 Angled supports 1 row of terminals + earth

Modular dividers
Code AD1076 AD1080(1) AD1007 AD1081(2) AD1030 AD1031 AD1075 AD1006 3

In (A) 125 125 175 175 250 400 125 175
Icw (kA) 4.4 4.2 11 11 21 21 4.4 11
Version pole 1 1 1 1 1 1 3 3
max 35 35 70 70 120 185 35 70
No. outgoing feeder Ø cable (mm2) 1,5÷10 4 4
2,5÷16 10 6 10 6 5 5 6 6
2,5÷25 2 2
No. DIN modules 2,5 1,5 2,5 2 3 3 4.5 4.5
Rated service voltage Ue (V) 1000 Vac 1000 Vac 1000 Vac 1000 Vac 1000 Vac 1000 Vac 1000 Vac 1000 Vac
1500 Vdc 1500 Vdc 1500 Vdc 1500 Vdc 1500 Vdc 1500 Vdc 1500 Vdc 1500 Vdc
Four poles
Code AD1004 AD1028 AD1029 AD1027 AD1034 AD1053

In (A) 125 125 125 160 250 250
Icw (kA) 10 4.2 4.2 6.2 15 15
Ipk (kA) 24 25 25 20 30 30
Version poli 4.2 4 4 4 4 4
Installation DIN35/plate DIN35/plate DIN35/plate DIN35 with AD1038 brackets with AD1038 brackets
Power supply Ø cable (mm2) min. 6 6 6 10
No. outgoing feeder Ø cable (mm2) 1/6 5/phase No. 22 holes M5 with No. 32 holes M5 with
17,5mm pitch per phase 17,5mm pitch per phase
1.5/6 4/neutral
(threaded busb. (threaded busb.
1.5/10 2/phase 7 9 20x5mm) 20x5mm)
6/neutral
1.5/16 2
2.5/16 8
6/25 2 2 3
Dimensions HxWxD (mm) 74.5x98x45 93x89x48 96x126x48 90x160.5x50 150x600x70 150x800x70
No. DIN modules 5,5 5 7 9 24 36
Rated service voltage Ue (V) 1000 Vac 440 440 440 500 500
1500 Vdc
(1)
Possibility of putting in parallel with AD1083 connections.
(2)
Possibility of putting in parallel with comb type connection (not supplied).

Flexible busbars up to 1000 A

Capacity (A) Dimensions
Section
In No. busbar/ WxW dimensions Lenght Weight
Cross-section (A) Code phase IP31 IP41 IP65 (mm) (mm2) (mm) (kg)
250 BF1602 1 395 323 250 20x3 60 2000 1,42
3
400 BF2502 1 498 460 400 20x5 100 2000 2,15
500 BF4002 1 660 620 500 24x6 144 2000 3
630 BF4012(1) 1 758 702 630 32x5 160 2000 3,36
1000 BF6302 1 1203 1140 1000 40x8 320 2000 6,33
(1)
Only for front extended terminals and rear terminals.
Busbars with shaped section for applications up to 800 A

Section
Cross section (A) Code phase IP31 IP41 IP65 (mm) (mm2) (mm) (kg)
520 BA0400 1 630 520 35 20x20 200 1730 4
830 BA0800 1 970 830 35 20x20 200 1730 4,4

Selection of busbar holders and crosspieces
Vertical installation Horizontal installation
1 Back of 2 Back of
structure cable container
4 Back of cable
connection box
3 Direct connection
with Unifix H
3
Crosspieces for fixing to structure

Busbars with shaped
Busbar holder section Internal Cable
Type In ≤ 400÷800A Installation Structure Cable container cable container connection box
Scaled up to 800A
PB0802 2 TL2000 (W=300mm) TL2100 W=200mm)
BA0400
BA0800
4 TL2000 (H=300mm)
Linear up to 800A 1
TL1000 (W=600mm)
TL3000 (W=300mm)
PB0803 TL1100 (W=800mm)
2
BA0400
BA0800 TL1000 (W=600mm)
3
TL1100 (W=800mm)
4 TL3000 (H=300mm)
Table for selection and assembly of busbars with shaped section and busbar holders
The use of the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the
maximum distance (max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc.
1/4 X
X
The distance between the first busbar holder
1/4 X and the end of the busbar must not exceed
1
/4 of “X”.
No. of busbar holders according to the max. Icc

Busbar No.busbars X max X max X max X max X max X max X max
Busbar Capacity holder per phase 25 kA (mm) 35 kA (mm) 50 kA (mm) 65 kA (mm) 75 kA (mm) 85 kA (mm) 100 kA (mm)
Linear
BA0400 400A PB0803 1 4 550 5 425 - - - - - - - - - -
BA0800 800A PB0803 1 4 550 4 550 - - - - - - - - - -
Scaled
BA0400 400A PB0802 1 4 550 4 550 - - - - - - - - - -
BA0800 800A PB0802 1 4 550 4 550 - - - - - - - - - -
max X = maximum distance not to be exceeded between two consecutive busbar holders.

Prefabricated kits for connections between apparatus and busbars with shaped section
400/800 A
Apparatus Connection kit

Type of installation From circuit-breaker in From circuit-breaker in cable From circuit-breaker in struc- From circuit-breaker in cable
structure towards busbars in container towards busbars in ture towards busbars on back container towards busbars on
cable container structure of structure back of structure
Type of busbar holder Scaled PB0802 Linear PB0803 Linear PB0803 Linear PB0803
Apparatus with front terminals fixed horizontal installation
Tmax T1 4 poles KB1001(1)
Tmax T2 4 poles KB1001
Tmax T5 4 poles CB + diff. mod. KB1021
Apparatus with front terminals fixed vertical installation
Tmax T3 4 poles KB1006 KB1010 KB1014 / KB1018(2) KB1014 / KB1018(2)
Tmax T3 4 poles (w/mount. struct) KB1006 KB1010 KB1014 KB1014
Tmax T3 4 poles CB + diff.mod. KB1019
Tmax T5 4 poles KB1022 KB1024
Tmax T5 4 poles CB + diff.mod. KB1022 KB1024
(1)
For Tmax T1 fit the circuit-breaker with extended terminals.
(2)
KB1018: only with flat busbars and scaled busbar holder.
Use of prefabricated kits
A C
Dimensions of the conductors

Apparatus AxBxC (mm) Cross-section (mm2)
Tmax T1-T2 - 50
Tmax T3 20x5x1 150
Tmax T5 - 630A 32x6x1 -
The use of the prefabricated connection kits is only possible with the cable container mounted on the right of the structure.

Flat busbars for distribution up to 630 A
In No. busbar/ Icw max WxW Lenght Weight
Cross-section (A) Code phase IP31 IP43 (kA) (mm) (mm) (kg)
275 BR0250 1 290 275 23 15x5 1750 1,35
440 BR0400 1 475 440 23 25x5 1750 1,8

3
695 BR0630 1 750 695 32 30x10 1750 4,4
Table for selection and assembly of busbars with flat section and busbar holders
1 Back of 2 Back of cable 3 Back of cable

structure container connection box
Flat busbar Crosspieces for fixing to structure

Busbar rolder Cable Cable
type In = 250A In = 400A In = 630A Installation Structure container connection box
Scaled up to 630A
BP0634 2 TL3000 (W=300mm)
3 TL3000 (H=300mm)
Linear up to 800A TL1000 (W=600mm)

1
BP0630 TL1100 (W=800mm)
2 TL3000 (W=300mm)
3 TL3000 (H=300mm)

Table for selection and assembly of busbars with flat section and busbar holders
The use of the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the
maximum distance (max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc.
1/4 X
3 X
1/4 X
The distance between the first busbar holder and
the end of the busbar must not exceed 1/4 of “X”.

Busbar No. busbars X max X max X max X max
Busbar Capacity holder per phase 25 kA (mm) 35 kA (mm) 50 kA (mm) 65 kA (mm)
BR0250 250A 1 11 175 15 125 18 100 - -
BR0400 400A BP0634 1 9 225 15 125 18 100 - -
BR0630 630A 1 9 225 15 125 18 100 - -
BR0250 250A 1 4 500 6 350 10 200 - -
BR0400 400A BP0630 1 4 500 6 350 10 200 - -
BR0630 630A 1 - - 4 600 4 600 9 210
max X = maximum distance not to be exceeded between two consecutive busbar holders
Flat drilled and threaded busbars for earthing connections

WxW Length AxB
Cross-section Code Threading Pitch (mm) (mm) (mm)
5 20 6MA
EV1119 6 MA 20 20x5 2000
20
5 20 6MA
EV1120 6 MA 20 25x5 2000
25
5 25 6MA
EV1121 6MA 25 50x5 2000

50
EV1122 6MA 34x30

A
EV1123 8MA 34x30
B
EV1124 6MA 40x50
EV1125 8MA 40x50

Unifix systems
Technical characteristics Unifix H Unifix L
Rated service voltage (Ue) 690V AC 400V AC
Rated insulation voltage (Ui) 1000V AC 500V AC
Rated impulse withstand voltage (Uimp) 8kV 6kV
Rated frequency 50/60Hz 50/60Hz
Rated current (In) central power supply 400A 100A 3
lateral power supply 320A 80A
Rated short-time withstand current (Icw) 25kA
Maximum peak current (Ipk) 52,5kA-400V
Maximum installable circuit-breaker size 250A 100A
Conditioned short-circuit Tmax T1 36kA-400V
current (Icc)
Tmax T2 N, S (1) 50kA-400V
Tmax T3 50kA-400V
Tmax XT1 50kA-400V
Tmax XT3 50kA-400V
S200M 10kA-400V
S200P 25kA-400V
Degree of protection IP20 with accessory IP20
Characteristics of the insulating material Self-extinguishing thermoplastic V1 (UL94) Self-extinguishing thermoplastic V1 (UL94)
Characteristics of the conductor material Electrolytic copper Electrolytic copper
Width 24/600 12/400
(No. modules/mm) 36/800 24/600
36/800
Installation of Unifix system

Frame for Tmax T and Tmax XT 300x600mm (HxL) ED2183
series
300x800mm (HxL) ED2191
Fixing brackets H=300mm AD1097
Crosspiece for direct connection to W=600mm TL1000
the rear busbars with shaped section
W=800mm TL1100
with PB0803
Busbar 2P 12 mod. ED2993
18 mod. ED3009
24 mod. ED3017
36 mod. ED3025
18 mod. ED2951
24 mod. ED2969
36 mod. ED2977
Fixing support 24 mod. GD1520
36 mod. GD1530
(1)
Select circuit-breakers in version with front terminals for copper cables.

Unifix systems
Table for selecting connections according to the circuit-breaker
Series of circuit-breakers Unifix H Unifix L
SN201 (top power supply)
DS941 ED2654 L1/N 40A ED3272 L1/N 40A
ED2662 L2/N 40A ED3280 L2/N 40A
ED2670 L3/N 40A ED3298 L3/N 40A
3 S200 - DS200 (top power supply) (bottom power supply)
F200 up to 63A (Unifix L) ED2531 L1 63A ED2572 L1 63A ED3033 L1 100A
ED2549 L2 63A ED2590 L2 63A ED3041 L2 100A
ED2556 L3 63A ED2598 L3 63A ED3058 L3 100A
ED2564 N 63A ED2606 N 63A ED3066 N 100A
ED2845 False pole module
S800 (top power supply)
ED2557 L1 ≤32A
ED2558 L2 ≤32A
ED2559 L3 ≤32A
ED2560 N ≤32A
ED2551 L1 125A
ED2552 L2 125A
ED2553 L3 125A
ED2554 N 125A
S280 (80-100A) (top power supply)
E200 up to 100A - RS370 - F200 80/100A (Unifix H) ED2720 L1 100A ED3132 pow. supply L1/L2/L3/N - 350mm
ED2738 L2 100A ED0026 pow. supply L1/L2/L3/N - 1500mm
ED2753 N 100A
MDRC - Various apparatus (top power supply) (bottom power supply)
ED2894 L1/N 16A ED2910 L1/N 16A ED3108 pow. supply 2 cables L1/N 16A
ED2902 L1/L2 16A ED2928 L1/L2 16A ED3116 pow. supply 3 cables L1/L2/L3 16A
ED3124 pow. supply 4 cables L1/L2/L3/N 16A
ED3355 pow. supply 2 cables L1/N 40A
ED3363 pow. supply 3 cables L1/L2/L3 40A
Tmax T1 Circuit-breaker (top/bottom power supply)
Tmax XT1 ED2217 L1 Top/L2 Bottom
ED2225 L2 Top/L1 Bottom
ED2233 L3 Top/N Bottom
ED2241 N Top/L3 Bottom
Residual current ED2373 False pole module
Selenoid operator ED2381 False pole module
Tmax T3 Circuit-breaker (top power supply) (bottom power supply)
Tmax XT3 ED2290 L1 ED2332 L1
ED2308 L2 ED2340 L2
ED2316 L3 ED2357 L3
ED2324 N ED2365 N
For the DDA locks, order the false module ED2845 codes separately according to the size of the residual current lock.
If mounting XT1-XT3 on Unifix H, the polished flanges AD3301, AD3302, AD3303, AD3304 must also be ordered, see spare parts page 3/49.

Unifix systems
Direct connection Feeder module for
with the 400/800A 400A frame
system of busbars (L1-L2-L3-N).
with shaped
section.
3
Direct power Power supply by

supply of the bases means of general
by means of feeder row circuit-breaker.
module ED2209.
N
N
L1 L1
T T
L2 L2
N
L3
L3 N
Connections Power supply of the

(L1-L2-L3-N) for busbar with 100A
System Pro M feeder module
modular apparatus. without cable.
Terminal capacity
35mm2.

supply of the means of modules
busbars by and cables in
means of feeder parallel.
module.
T T
N N

Ordering codes
SL....
Wall-mounted switchgear
Wall-mounted switchgear structure
Dimensions (mm)
MC....
Package/
H W D Code No. of pieces
Back, roof and base for structure
600 165 SL0600 1/1
3 800 165 SL0800 1/1
600
1000 (24 DIN mod.) 165 SL1000 1/1
1200 165 SL1200 1/1
VC.... Additional wall-mounted cable container structure

Can be mounted on the right and left of the basic structure, can be used as cable container or as incoming column
which can be equipped with kit for Tmax circuit-breakers
Dimensions (mm)
Package/
Back, roof and base for cable container
600 165 VC0600 1/1
800 165 VC0800 1/1
300
1000 165 VC1000 1/1
1200 165 VC1200 1/1
Intermediate uprights for lateral side-by-side positioning or external cable

VC.... MC.... container
Allows several structures side-by-side on the right and left of the basic one.
Dimensions (mm)
Package/
H Code No. of pieces
Intermediate upright for placing structures side by side
600 MI0600 1/1
800 MI0800 1/1
1000 MI1000 1/1
1200 MI1200 1/1
MI....
Side closure with blind panel
Dimensions (mm)
Package/
H D Code No. of pieces
No. 2 side closures for wall-mounted structures
600 165 MC0600 1/2
800 165 MC0800 1/2
1000 165 MC1000 1/2
1200 165 MC1200 1/2

SL....
Floor-mounted switchgear
Floor-mounted structure
Dimensions (mm)
Package/
Back, roof and base for structure
1400 195 SL1400 1/1
1600 195 SL1600 1/1
3
600
1800 (24 DIN mod.) 195 SL1800 1/1
2000 195 SL2000 1/1
1400 195 SL1408 1/1
ZL1000 1600 800 195 SL1608 1/1

1800 (36 DIN mod.) 195 SL1808 1/1
2000 195 SL2008 1/1
800
Internal cable container structure 36 mod. (W=800mm)
Only to be ordered for the 36 DIN mod. structures (W=800mm). Consisting of a pair of functional uprights and a
blind door complete with two key locks. Can be mounted either on the right or left.
Dimensions (mm)
Package/
Pair of functional uprights and internal blind door
VC..25
1400 195 VC1425 (1) 1/1
1600 195 VC1625 (2) 1/1
200
1800 195 VC1825 (3) 1/1
2000 195 VC2025 (4) 1/1
(1) (2) (3) (4)
For structure SL1408 - For structure SL1608 - For structure SL1608 - For structure SL2008
SL.... External cable container

VC.... Can be mounted on the right and left of the basic structure, can be used as cable container or as incoming column
which can be equipped with kit for Tmax circuit-breakers.
Dimensions (mm)
Package/
Back, roof and base for cable container
M.... 1400 195 VC1400 1/1
1600 195 VC1600 1/1
300
1800 195 VC1800 1/1
2000 195 VC2000 1/1
ZL2001 Note: the palletisable base strips (ZL1000 or ZL3000) and the flanges (ZL1001, ZL1101 or ZL2001) must be ordered separately,
ZL3000 see page 3/27.
ZL1001
ZL1001 Intermediate uprights for lateral side-by-side positioning or external cable container
Allows several structures side-by-side on the right and left of the basic one.
Dimensions (mm)
Package/
H Code No. of pieces
Intermediate upright for placing structures side by side
1400 MI1400 1/1
1600 MI1600 1/1
1800 MI1800 1/1
2000 MI2000 1/1

Ordering codes
MC....
Side closure with blind panel
Dimensions (mm)
Package/
Description H D Code No. of pieces
No. 2 fixed side closures 1400 MC1400 1/2
3 No. 2 fixed side closures 1800
195
MC1800 1/2
LF.... Side closure with removable panel

Dimensions (mm)
Package/
No. 2 removable side closures 1400 LF1400 1/2
800 195
600
300 No. 2 removable side closures 2000 LF2000 1/2
Base strips
Dimensions (mm) Package/
Description H Code No. of pieces
Angles
No. 2 angle pieces for structure
100 ZL1000 1/2
or cable container
Intermediate angle for side-by-
100 ZL3000 1/1
ZL1000 side structures
Plinth covering flanges
No. 2 structure base strip
ZL1101 600 ZL1001 1/2
ZL1001 flanges
ZL2001
No. 2 structure base strip
800 ZL1101 1/2
flanges
SL....
No. 2 external cable container
VC.... 300 ZL2001 1/2
base strip flanges
SL....
Example of base strip composition for structures

600 800 600 300
ZL2001
ZL3000
ZL1000 ZL1000
ZL1001 ZL1101 ZL1001 ZL2001

ZL3000 ZL3000

Wall-mounted/floor-mounted switchgear
Glass doors P43, 24/36 modules
Steel sheet door 15/10 thick with 4mm thick safety glass fitted with polyurethane
gasket complete with handle with key with double tab. Reversible, hinged on the right or left.
PV0600 Dimensions (mm)
PV0800 Package/
PV1000 H W Code No. of pieces
PV1200
Glass doors for wall-mounted structures 24 DIN mod. 3
600 PV0600 1/1
800 PV0800 1/1
600
1000 PV1000 1/1
1200 PV1200 1/1
Glass doors for floor-mounted structures 24 DIN mod.
1400 PV1400 1/1
1600 PV1600 1/1
600
1800 PV1800 1/1
PV1400 2000 PV2000 1/1
PV1600
PV1800 Glass doors for floor-mounted structures 36 DIN mod.
PV2000
PV1436 1400 PV1436 1/1
PV1636
PV1836 1600 PV1636 1/1
PV2036 800
1800 PV1836 1/1
2000 PV2036 1/1
Glass doors for floor-mounted structures 36 DIN mod. + internal cable containers
1400 PV1424 1/1
1600 PV1624 1/1
800
1800 PV1824 1/1
2000 PV2024 1/1
600 600 800 800

600 200
PV1424 600
PV1624 800
PV1824 1000 1400
PV2024 1200 1600
1800
2000

Ordering codes
Blind doors P43, 24/36 modules
PC0601
PC0801 Steel sheet door 15/10 thick fitted with polyurethane gasket complete with handle with key with double tab.
PC1001
PC1201 Reversible, hinged on the right or left.
PC0602 Dimensions (mm)
PC0802 Package/
PC1002 H W Code No. of pieces
PC1202
3 Blind doors for wall-mounted structures 24 DIN mod.
600 PC0601 1/1
800 PC0801 1/1
600
1000 PC1001 1/1
1200 PC1201 1/1
Blind doors for external wall-mounted cable container
PC1402
PC1602 600 PC0602 1/1
PC1802
PC2002 800 PC0802 1/1
300
1000 PC1002 1/1
1200 PC1202 1/1
Blind doors for floor-mounted structures 24 DIN mod.
1400 PC1401 1/1
1600 PC1601 1/1
600
1800 PC1801 1/1
2000 PC2001 1/1
Blind doors for floor-mounted structures 36 DIN mod.
1400 PC1436 1/1
1600 PC1636 1/1
PC1401 800
PC1601 1800 PC1836 1/1
PC1801
PC2001 2000 PC2035 1/1
PC1436 Blind doors for external floor-mounted cable container
PC1636
PC1836 1400 PC1402 1/1
PC2035
1600 PC1602 1/1
300
1800 PC1802 1/1
2000 PC2002 1/1
300/600 300 600 800
600
800
1000 1400
1200 1600
1800
2000

Internal door for external cable container
PO1431 H W Code No. of pieces
PO1631 Internal doors for floor-mounted cable container
PO1831
PO2031 1400 PO1431 1/1
1600
300
PO1631 1/1 3
1800 PO1831 1/1
2000 PO2031 1/1
Pavimento Form 2 segregation

600 Only for structures without external cable container
800
SH0700 Dimensions (mm)
Package/No.
SH0708
Description W H Code of pieces
SH0600 24 DIN mod.
SH6008
Segregation kit 200 SH0600 1/1
SH0800
SH0808 Segregation kit 600 300 SH0800 1/1
Base/head segregation kit 200 SH0700 1/1
36 DIN mod.
SH0700 Segregation kit 200 SH0608 1/1
SH0708
Segregation kit 800 300 SH0808 1/1
Base/head segregation kit 200 SH0708 1/1
Vertical segregations
SV....
Only for external cable container without structure
Dimensions (mm)
Package/No.
Description H D Code of pieces
Vertical segregation kit 600 SV0600 1/1
165
195

Ordering codes
Horizontal shelves
Dimensions Package/
Description (mm) W Code No. of pieces
24 DIN mod.
Horizontal shelf for wall-mounted struc-
SH0100 1/1
ture
3 Horizontal shelf for floor-mounted
600
SH0200 1/1
structure
SH0100
36 DIN mod.
Horizontal shelf for floor-mounted
800 SH0208 1/1
structure
SH0200
SH0208
IP31 vertical finishing profiles

IP0600-IP0800
IP1000-IP1200 Dimensions Package/
IP0601 Description (mm) H Code No. of pieces
IP0602
IP1604 Vertical finishing profile for structure and wall-mounting cable container
No. 2 finishing profiles structure/cab.cont. 600 IP0600 1/2
IP0603-IP0801
IP1001-IP1201 No. 1 finishing profiles for side-by-side 600 IP0603 1/1
No. 1 finishing profiles for side-by-side 800 IP0801 1/1
IP1400-IP1600
IP1800-IP2000 Vertical finishing profile for structure and floor-mounting cable container
IP0601 No. 2 finishing profiles structure/cab.cont. 600 IP1400 1/2
IP0602
IP1604
IP1401-IP1601
IP1801-IP2001
IP31 horizontal finishing profiles

Dimensions Package/
Horizontal finishing profile for structure wall-mounting/floor-mounting and cable container
No. 2 horizontal profiles for structure 600 IP0601 1/2
No. 2 horizontal profiles for structure 800 IP0604 1/2
No. 2 horizontal profiles for cable
300 IP0602 1/2
container

Connection box
Dimensions (mm)
RC1000 Package/
Description H W D Code No. of pieces
Box for roof for floor-mounted structures 24 DIN mod.
Box for roof for structure 400 600 195 RC1000 1/1
Box for roof for floor-mounted cable container
3
Box for roof for cable container 400 300 195 RC2000 1/1
RC2000
2 Crosspieces for accessories

Can be mounted on the structure to anchor cables or to mount accessories. They can be mounted on the side,
2 on the rear or in the cable container of the structure.
Mounting Package/
Description position Code No. of pieces
2
No. 2 structure rear crosspieces
1 TL1000 1/2
W=600mm
No. 2 structure rear crosspieces
1 TL1100 1/2
1 W=800mm
No. 2 cable container and box
2 TL3000 1/2
rear crosspieces W=300mm
No. 2 fixing crosspieces
W=300mm for scaled busbar 2 TL2000 1/2
holder PB0802
No. 2 fixing crosspieces
W=200mm for scaled busbar 2 TL2100 1/2
holder PB0802

Ordering codes
AD1009
GD1520
GD1530
Kit for apparatus
DIN rail kits for System Pro-M modular apparatus, Tmax T1-T2-T3-XT1-XT3,
moulded-case circuitbreakers
Kit consisting of double aluminum profile (DIN35) complete with fixing brackets.
Dimensions
(mm)
AP6000 Package/
3 Description W Code No. of pieces
AD1096 12 DIN mod.
AD1098
DIN rail kit (aluminium) - Floor 300 GD1512 1/1
DIN rail kit (aluminium) - Wall 300 GD1515 1/1
24 DIN mod.
AD1097 DIN rail kit (aluminium) 600 GD1520 1/1

36 DIN mod.
DIN rail kit (aluminium) 800 GD1530 1/1
AD1096
AD1098
Supports for Unifix H
Package/
for panel H=300mm AD1097 1/1
OFF
OFF
OFF
Depth adapters
AP6000 Enables the depth of miniature circuit-breakers to be adapted to that of moulded-case circuit-breakers mounted
on the same DIN rail.
Parete
Dimensions (mm)
Package/
60 Description W Code No. of pieces
80
Depth adapters for
600 AP6000 1/1
Tmax T1-T2-T3-XT1-XT3
100
60
80
Supports for duct

80
60 Package/
100
AD1096
60
80
No. 4 plastic supports for horizontal duct AD1009 1/4
Pavimento No. 4 metal supports for horizontal/vertical wall-

AD1096 1/4
mounted duct
60 No. 4 metal supports for horizontal/vertical floor-
80 AD1098 1/4
100 standing duct
100
60
80
100
80
60
100
60
80
AD1098

Kit for apparatus
Steel sheet panels complete with hinges positioned on the right or left.
Dimensions (mm)
Package/
Description H W Code No. of pieces
12 DIN mod. 3
Modular panel 1 DIN row 200 300 PM2612 1/1
24 DIN mod.
Modular panel 1 DIN row 150 PM1500 1/1
Modular panel 1 DIN row
300 PM2312 1/1
Tmax RC
600
Modular panel 1 DIN row only
300 PM3624 1/1
for Unifix H
Modular panel 2 DIN rows 300 PM3648 1/1
36 DIN mod.
Modular panel 1 DIN row
300 PM2315 1/1
Tmax RC 800
Modular panel 1 DIN row only
300 PM3836 1/1
for Unifix H
Width 600/800mm
PM1500/PM1536 PM3648/PM3872 PM2624/PM2836
= 74,5 =
149 199
=
150 299 =
432/634
74,5 432/634
596/796
596/796
432/634
596/796
Width 600mm
Version for Tmax with mod. diff. Version for Unifix H
PM2312/PM2315 PM3624/PM3836 PM6672
99.5 99,5
=
299 299
199.5 200
=
599
432/634 432/634
200
596/796 596/796
99,5
432
596

Ordering codes
Kit for apparatus

Steel sheet panels complete with hinges positioned on the right or left.
Dimensions (mm)
Package/
Description W L Code No. of pieces
24 DIN mod.
3 Panel for 2 instruments 72x72mm PS2720 1/1
Panel for 2 instruments 96x96mm PS2960 1/1
200 600
36 DIN mod.
200 800
Width 600/800mm
PS4720/PS4728/PS4960/PS4968 PS2720/PS2728/PS2960/PS2968
68 68
92 92
68 68
199
92 199 92
596/796 596/796
Accessories for panels

EV1135 Package/
EV1136 Description Code No. of pieces
No. 10 holes covers W=2000mm
AD1086 1/10
grey RAL 7035 colour
No. 3 holes covers 36 Din modules
AD1600 AD1088 1/3
AD1800
AD1086 AD1089 1/3
AZZ
INO AD1088
AG
LU C
IM AD1089 No. 10 closing caps for instrument panel
EV1135 1/10
72x72mm
No. 5 closing caps for instrument panel 96x96mm EV1136 1/5
No. 20 label-holders 12 DIN mod. AD1390 1/20
AD1101÷AD1104
No. 288 labels 1 mod. 15x17mm (HxW) AD1101 (1) 1/288
(1)
Labels can be written with Grafoplast compatible plotter system.

Kit for apparatus
Kit for OT160÷400
Dimensions
KO.... (mm)
Package/
Vertical Description H W Control Code No. of pieces
24 DIN mod. - W=600mm
Kit for vertical
300 600 Decentralized KO1260 1/1 3
OT160/200/250/315/400
Kit for horizontal
300 600 Decentralized KO1261 1/1
OT160/200/250/315/400
KO.... Kit for vertical

Horizontal OT160/200/250/315/400
Kit for horizontal
OT160/200/250/315/400
External cable container
Kit for vertical
OT160/200/250/315/400
Standard blind for general apparatus

Dimensions
(mm)
Package/
PF.... Description H W Code No. of pieces
24 DIN mod.
Blind back plate 200 PF1002 1/1
Blind back plate 600 600 PF1006 1/1
Blind back plate box/cable
300 PC0600 1/1
container
36 DIN mod.
300 300 PC0300 1/1
container
600 300 PC0600 1/1
container
The panels must be ordered separately.

Ordering codes
Kit for apparatus

Standard blind, recessed and ventilated panels for general apparatus
PC....
Dimensions (mm)
Package/
PR....
24 DIN mod.
3 Blind panel 50 PC1050 1/1
PR.... Blind panel 100 PC1600 1/1

Blind panel 150 PC1150 1/1
600
Blind panel (Inner door) 1600 PC1660 1/1
Blind recessed panel 200 PR2600 1/1
PC1660 Blind recessed panel 600 PR6600 1/1
PC1860
PC2060 Ventilated panel 100 PA1600 1/1
PC1880
PC2080 36 DIN mod.
800
Blind panel 400 300 PC4401 1/1

Kit for apparatus
Kit for installing Tmax moulded-case circuit-breakers
Horizontal installation (front terminals)
Dimensions (mm)
Package/
24 DIN mod. wall-mounted/floor-mounted switchgear
Kit T1 3/4 P fixed 200 LK1000 1/1
3
Kit T1 4 P fixed + RC mod. 200 LK1004 1/1
Kit T2 3/4 P fixed 200 LK2000 1/1
Kit T3 3/4 P fixed 200 LK3000 1/1
Kit XT1 3/4 P fixed 200 LX1000(1) 1/1
Kit XT1 4 P fixed + RC mod. 200 LX1005 1/1
Kit XT2 3/4 P fixed 200 LX2000(1) 1/1
600
Kit XT3 3/4 P fixed 200 LX3000(1) 1/1
Kit XT4 3/4 P fixed 200 LX4003 1/1
Kit XT4 4 Pfixed + RC mod. 200 LX4004 1/1
Kit T4 3/4 P fixed 200 LK4003(1) 1/1
Kit T5 3/4 P fixed 300 LK5003 1/1
24 DIN mod. floor-mounted switchgear
Kit T3 3/4 P with divider 200 600 LK3301 1/1
Kit T1 3/4 P fixed 200 LK1100(1) 1/1
Kit T2 3/4 P fixed 200 LK2100 1/1
Kit T3 3/4 P fixed 200 LK3110(1) 1/1
Kit T4 3/4 P fixed 200 LK4103 1/1
800
Kit T5 3/4 P fixed 300 LK5103 1/1
Kit XT1 3/4 P fixed 200 LX1100 1/1
Kit XT3 3/4 P fixed 200 LX3110 1/1
(1)
For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for
plate-mounting, AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting.

Ordering codes
Kit for apparatus

Vertical installation (front terminals)
Dimensions (mm)
Package/
24 DIN mod. wall-mounted/floor-mounted switchgear
3 Kit DIN T1-T2-T3-XT1-XT3, 3/4 P 150÷600 GD…(1) 1/1
Kit No. 4 T1 3/4 P fixed + RC mod. 200 LK1001 1/1
Kit T2 3/4 P fixed 200 LK2001 1/1
Kit T3 3/4 P fixed 300 LK3001(4) 1/1
Kit No. 3 T3 3/4 P side by side 300 LK3300(4) 1/1
Kit No. 4 T1 3/4 P side by side 200 LK4100(4) 1/1
Kit T4 3/4 P fixed + RC mod. 400 LK4005 1/1
Kit T5 3/4 poli fixed 400 LK5005 1/1
Kit T5 4 P fixed + RC mod. 500 600 LK5006 1/1
Kit XT1 3/4 P fixed 200 LX1001(4) 1/1
Kit XT1 N 3 CBs side by side 200 LX4100 1/1
Kit XT2 3/4 P fixed 200 LX2001 1/1
Kit XT2 N 3/4(3) CBs side by side 200 LX3200(2) 1/1
Kit XT3 3/4 P fixed 300 LX3001 1/1
Tmax XT3 4 P P fixed + RC mod. 300 LX3005 1/1
Kit XT3 N 2 CBs side by side 300 LX3300 1/1
Kit XT4 3/4 P fixed 300 LX4005(4) 1/1
Kit XT4 N 3/4(3) CBs side by side 300 LX4008(2) 1/1
Kit T6 3/4 P fixed 500 600 LK6011 1/1
(1)
CONTINUED
For the selection of kit for installation on DIN rail see page 3/30.
(2)
Order polished flange AD3310, AD3311, AD3312, AD3313 see page 3/11.
(3)
(4)
For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for platemounting: AD3306 XT2 3P Flange for plate-mounting,
AD3307 XT3 3P Flange for platemounting, AD3308 XT4 3P Flange for plate-mounting.

Kit for apparatus
Dimensions (mm)
Package/
3
Kit DIN T1-T2-T3-XT1-XT3, 3/4 P 150÷600 GD…(1) 1/1
Kit T1 3/4 P fixed 200 LK1101(4) 1/1
Kit T2 3/4 P fixed 200 LK2101 1/1
Kit No. 4 T2 3/4 P side by side 200 LK3111 1/1
Kit T3 3/4 P fixed 300 LK3101(4) 1/1
Kit T3 4 P fixed + RC mod 300 LK3105 1/1
Kit No. 4 T3 3/4 P side by side 300 LK3102 1/1
Kit T4 3/4 P fixed 400 LK4105 1/1
800
Kit T5 3/4 P fixed 400 LK5105 1/1
Kit T6 3/4 P fixed 500 LK6012 1/1
Kit XT1 3/4 P fixed 200 LX1101 1/1
Kit XT1 4 P fixed + RC mod 300 LX1108 1/1
Kit XT2 3/4 P fixed 200 LX2101 1/1
Kit XT3 3/4 P fixed 300 LX3101 1/1
Wall-mounted external cable container
Kit T3 3/4 P fixed 300 LK3003 1/1
Kit XT2 3/4 P fixed 300 300 LX2300 1/1
Kit XT3 3/4 P fixed 300 LX3003 1/1
Floor-mounted external cable container
Kit T1 3/4 P fixed 200 LK1002 1/1
Kit T2 3/4 P fixed 200 LK2002 1/1
Kit T3 3/4 P fixed 300 LK3002 1/1
Kit T4 3/4 P fixed 400 LK4007 1/1
Kit T5 3/4 P fixed 400 LK5007 1/1
300
Kit XT1 3/4 P fixed 200 LX1002(4) 1/1
Kit XT2 3/4 P fixed 300 LX2002 1/1
Kit XT3 3/4 P fixed 300 LX3002(4) 1/1
Kit XT4 3/4 P fixed 300 LX4007(4) 1/1
((1)
(2)
(3)
(4)

Ordering codes
BA0400 Distribution system

Distribution busbars with shaped section
BA0800 Dimensions (mm)
Package/
Description L Code No. of pieces
Busbar In=400A 1730 BA0400 1/1
Busbar In=800A 1730 BA0800 1/1
3
PB0802 Busbar holders for busbars with shaped section

Package/
Scaled
PB0803
Scaled busbar holder In=800A - 35kA PB0802 1/1
Linear
Linear busbar holder In=800A - 35kA PB0803 1/1
Joints for busbars with shaped section

Package/
No. 4 copper 400A branch joints AD1077 1/4
No. 4 joints for joining busbars with shaped section
AD1068 1/4
400/800A
AD1068 AD1077
20 Hammer seal screws for busbars with shaped section

AD1056
Package/
27
AD1064
No. 12 M8 screws L=20mm for cable terminal com-
AD1056 1/12
plete with screw-covering cap
No. 12 M8 screws L=27mm for flat busbars up to
AD1064 1/12
10mm, complete with screw-covering cap

Distribution system
AD1065 Resting bases for busbars with shaped section
Package/
No. 4 resting bases for 400/800A busbars AD1065 1/4
Crosspieces for 400/800A busbars with shaped section

Pic.1 Mounting Package/
Description Pic. Code No. of pieces
Vertical busbars at back of structure and connection to the Unifix H system
TL1000
TL1100 No. 2 Fixing crosspieces W=600mm
1 TL1000 1/2
for linear busbar holder PB0803
No. 2 Fixing crosspieces W=800mm
1 TL1100 1/2
Vertical busbars at back of the external cable container or horizontal in the cable connection box
2 TL3000 1/2
2 TL2000 1/2
for scaled busbar holder PB0802
Vertical busbars at the back of the cable container internal
Pic.2
3 TL2100 1/2
for scaled busbar holder PB0802
TL2000
TL3000
Pic.3
TL2100

Ordering codes
BR0250 Distribution system

BR0400 Flat busbar
Copper with 1750mm drilled length. Can be used with both linear BP0630 and scaled BP0634 busbar holder.
BR0630
Dimensions In Package/
Description (mm) L (A) Code No. of pieces
No. 2 copper busbar 15x5 250 BR0250 1/2
3 No. 2 copper busbar 25x5 1750 400 BR0400 1/2
No. 2 copper busbar 30x10 630 BR0630 1/2
Busbars holders
BP0630
Busbar holders made of insulating self-extinguishing material, certified in conformity with the EN 60439-1 Standard
BP0632 for Icc≤35kA.
Package/
No. 2 linear busbar holders In=630A - 32kA BP0630 1/1
BP0634 No. 2 terminal covers for linear busbar holders
BP0632 1/1
BP0630
No. 2 scaled busbar holder In=630A - 23kA BP0634 1/1
Crosspieces for flat busbars

Fig. 1 Mounting Package/
Busbar vertically on back of structure or of cable container
TL1000
TL1100 No. 2 crosspieces back of structure
1 TL1000 1/2
W=600mm with BP0630
No. 2 crosspieces back of structure
1 TL1100 1/2
W=800mm with BP0630
Busbars vertically on back of external cable container or horizontally in cable connection box
No. 2 crosspieces back of cable
container W=300mm with BP0630 or 2 TL3000 1/2
scaled BP0634
BP0632
Fig. 2
TL3000

Distribution system
Flexible busbars
Flexible busbars insulated with self-extinguishing material.
Description (mm) L (A) Code No. of pieces
No. 2 flexible busbars, section 20x3 250 BF1602 1/2
No. 2 flexible busbars, section 20x5 400 BF2502 1/2 3
2000
No. 2 flexible busbars, section 24x6 500 BF4002 1/2
No. 2 flexible busbars, section 32x5 630 BF4012 (1) 1/2
(1)
Only for circuit-breakers with front extended terminals or rear terminals
EV1119 Earthing busbars

EV1120 Copper busbars drilled and threaded for rapid connection of the conductors.
Dimensions Package/
EV1121 Description (mm) L Code No. of pieces
No. 2 earthing busbars 20x5
EV1119 1/2
threaded M6
2000 EV1120 1/2
threaded M6
EV1121 1/2
threaded M6
Insulators and copper busbars for neutral/earthing

Package/
No. 50 hexagonal insulators 30x30mm EV1122 1/50

Ordering codes
Type A Type B Distribution system

Prefabricated kit for connection between apparatus and busbars with shaped
section 400/800A
Mounting
Package/
Position Tmax/busbar Type Position Code No. of pieces
Wall-mounted/floor-mounted switchgear - Horizontal circuit-breaker
3 T1 -T2 in the struc. and busbars in the
B 1 KB1001 (1) 1/1
cable cont.
Mounting 1 Mounting 2 Floor-mounted switchgear - Horizontal circuit-breaker
T3 in the structure and busbars in the
B 1 KB1002 1/1
cable cont.
B 1 KB1020 1/1
cable cont.
B 1 KB1021 1/1
cable cont.
Wall-mounted/floor-mounted switchgear - Vertical circuit-breaker
B 1 KB1006 1/1
cable container
T3 in the cable container and busbars
B 1 KB1010 1/1
Mounting 4 in the structure
Mounting 3
Resid. current T3 in the cable cont.
B 2 KB1019 1/1
and busb. in the structure
T3 in the structure/cable container
B 2 KB1014 (2) 1/1
and busbars at back
T3 in the structure/cable container
B 2 KB1018 (2) 1/1
busbars at back
Floor-mounted switchgear - Vertical circuit-breaker
T5 and T5 resid.cur. in the struc. and
A 3-4 KB1022 1/1
busb. in the cable cont.
Resid. current T5 and T5 in the cab.
A 3-4 KB1024 1/1
cont. and bus. in the structure
(1)
For Tmax T1 fit the circuit-breaker with extended terminals.
(2)
Only with flat busbars and scaled busbar holder.

600
Distribution system
800
Unifix H
AD1097 Dimensions (mm) Package/
ED2183 Description W Code No. of pieces
ED2191
Frames for Tmax
Frame with 24 DIN module busbar 600 ED2183 1/1
Frame with 36 DIN module busbar 800 ED2191 1/1 3
No. 2 fixing brackets onto the structure for ED2183
AD1097 1/2
or ED2091
ED2209 Feeder modules
4P 400A feeder module (for ED2183-ED2191) ED2209 1/1
Basic modules In 16A
Basic module for DIN L1-N top 16A ED2894 1/1
ED2894 Basic module for DIN L1-L2 top 16A ED2902 1/1
ED2902
Basic module for DIN L1-N bottom 16A ED2910 1/1
ED2910
Basic module for DIN L1-L2 bottom 16A ED2928 1/1
ED2928 Basic modules In 40A
Basic module L1/Neutral top 40A ED2654 1/1
ED2654 Basic module L3/Neutral top 40A ED2670 1/1
ED2662
ED0004 Basic module L1 top 63A ED2531 1/1
ED2531-ED2549 Basic module L2 top 63A ED2549 1/1

ED2564-ED2556
Basic module L3 top 63A ED2556 1/1
Basic module Neutral top 63A ED2564 1/1
Basic module L1 bottom 63A ED2572 1/1
ED2720-ED2738 Basic module L3 bottom 63A ED2598 1/1
ED2746-ED2753
ED2551-ED2552 Basic module Neutral bottom 63A ED2606 1/1
ED2553-ED2554
Basic module with cable L1 top 100A ED2720 1/1
Basic module with cable Neutral top 100A ED2753 1/1
Basic modules ≤ In 40A S800
ED2845 Basic module L1 top ≤40A ED2557 1/1
ED2550
Basic module L2 top ≤40A ED2558 1/1
Basic module Neutral top ≤40A ED2560 1/1
ED2598-ED2506
Basic module Neutral bottom 125A ED2554 1/1
Basic module false pole W=27mm ED2550 1/1

Ordering codes
Distribution system
ED2217-ED2225
ED2233-ED2241 Unifix H
ED2258-ED2266
ED2274-ED2282 Package/
ED2332-ED2340
ED2357-ED2365 Description Code No. of pieces
Basic modules ≤ In 160A Tmax T1, Tmax XT1
Basic module L1 top L2 bottom ED2217 1/1
3
Basic module L3 top Neutral bottom ED2233 1/1
Basic module Neutral top L3 bottom ED2241 1/1
Basic module false pole for residual current release
ED2373 1/1
RC221
ED0001
ED0002 Basic module false pole for solenoid operator ED2381 1/1
ED0003
Basic modules ≤ In 160A Tmax T2
ED2290-ED2308
ED2316-ED2324 Basic module L1 top L2 bottom ED2258 1/1
Basic module L3 top N bottom ED2274 1/1
Basic module N top L3 bottom ED2282 1/1
ED2373 1/1
RC221
Basic module false pole for solenoid operator ED2399 1/1
ED2373 Basic module L1 top ED2290 1/1

Basic module L2 top ED2308 1/1
ED2381
Basic module N top ED2324 1/1
Basic module L1 bottom ED2332 1/1
Basic module N bottom ED2365 1/1
ED2373 1/1
RC221
Accessories
ED2407
PM3624 Basic module false pole for DDA ED2845 1/1
PM3836
Basic module false pole for modular MDRC ED2852 1/1
No. 2 IP20 covers (for ED2183-ED2191) W=173mm
ED2407 1/2
(10 DIN modules)
No. 6 duct supports 40x60mm (only for modular
ED2936 1/6
apparatus)
Modular front panel 300x600mm (HxL) PM3624 1/1
ED2936
Modular front panel 300x800mm (HxL) PM3836 1/1
Spare parts
No. 10 terminal covers for T1 ED0001 1/10
No. 10 terminal covers for S200/F200 ED0004 1/10

Distribution system
600
800 Unifix L
Dimensions Package/
ED2961 Description W (mm) Code No. of pieces
ED2962
2-pole busbars
ED….
GD1520
GD1530 100A 2P 12 module busbar 400 ED2993 1/6
3
PM2624
PM2836 100A 2P 24 module busbar 600 ED3017 1/6
4-pole busbars
2 poles 4 poles
N L1 N L1 L2 L3
Connection with 2 conductors L/N 16A ED3108 1/6
ED3124 1/6
ED3033 single phase
ED3041 Connection with 2 conductors L1/N 40A ED3355 1/6
ED3058
No. 10 connections L1-N 40 A ED3272 1/10
No. 10 connections L 1 100A ED3033 1/10
ED3104
No. 10 connections L 2 100A ED3041 1/10
ED3101
ED3102 No. 10 connections L 3 100A ED3058 1/10
ED3103 No. 10 connections N 100A ED3066 1/10
400 350
600 1500 No. 10 single-pole power supply terminals L1 ED3101 1/10
800 2500
1500 No. 10 single-pole power supply terminals L2 ED3102 1/10
No. 10 single-pole power supply terminals L3 ED3103 1/10
No. 10 single-pole power supply terminals N ED3104 1/10
Accessories
N°10 busbar covers (W=600mm) ED2961 1/10
N°2 busbar covers (W=800mm) ED2962 1/2
DIN rail Kit and supports (W=600mm) GD1520 1/1
ED3090 ED3132 ED3124
ED3405 ED0026 Modular front panel 200x600mm (HxW) PM2624 1/1
ED3413 ED0025
ED3439 Modular front panel 200x800mm (HxW) PM2836 1/1

Ordering codes
AL2000 Accessories
Brackets for wall fixing
AA1000
Package/
No. 2 brackets for wall fixing AL2000 1/2
Bracket for wall fixing of 2 side-by-side structures AA1000 1/1
For the wall-mounted version, order 2 x AL2000.
3
AL1000
AL1001
Eyebolts and lifting reinforcements

Package/
No. 4 M8 steel eyebolts AL1000 1/4
Rinforzato
No. 2 lifting reinforcements for side-by-side structu-
AL1001 1/2
TU8000 res W=300/600mm
No. 2 lifting/coupling reinforcements TU8000 1/2
Supports for terminal boxes

AD1099 Package/
Structure
AD1099 No. 2 supports for horizontal 45° angled terminal box AA1001 1/2
Cable container
AA1001 No. 2 supports for vertical terminal box in external
cable container or horizontal in the cable connection AD1099 1/2
box
No. 2 supports for vertical terminal box in internal
AD1005 1/2
cable container
EV1110 Angled supports for terminal boxes and earthing busbars

EV2110
Package/
EV1112
EV2112 No. 50 angled supports 1 row of terminals EV1110 1/50
EV1113
No. 10 angled supports 1 row of terminals EV2110 1/10
EV1119 No. 50 angled supports 1 row of terminals + earth EV1112 1/50

No. 10 angled supports 1 row of terminals + earth EV2112 1/10
No. 2 angled supports 1 row of terminals + earth EV1113 1/2

Accessories
Diagram holder pocket
The diagram holder pocket (made of RAL 2004 colour plastic, dim. HxL 237x265mm type A4) is applied to the
inside of doors/blind panels of suitable size using the adhesive provided.
Package/
Plastic diagram pocket AA5600 1/1 3
TS4013
Sections for accessories
TS4011 Dimensions (mm) Package/

No. 2 sections EN50024 C30 2000 TS4011 1/2
TS4012
No. 2 sections EN50035 G32 2000 TS4012 1/2
TS4000 No. 2 DIN sections EN50022 2000 TS4013 1/2
TS4001 No. 2 cable rails 600 TS4000 1/2
TS4002
TS4003 No. 2 cable rails 800 TS4001 1/2
No. 2 cable rails 1000 TS4002 1/2
No. 2 cable rails 1200 TS4003 1/2
Dividers
Package/
Single-pole
AD1080 AD1081 AD1030 Modular 125A AD1076 (1) 1/1

AD1031
Modular 125A AD1080 (2) 1/1
Modular 175A AD1007 (1) 1/1
(2)
Modular 175A AD1081 1/1
AD1075 AD1004 Modular 160A AD1027 1/1
AD1006
Three-pole
Four-pole
AD1028 AD1027 Modular 125A-medium-93x89x48 (HxLxP) AD1028 1/1
AD1029
Modular 125A-large-96x126x48 (HxLxP) AD1029 1/1
AD1038 Horizontal 250A for structures W=600mm AD1034 1/1
Horizontal 250A for structures W=800mm AD1053 1/1
(1)
10 outputs - (2) 6 outputs
AD1034
AD1053
Amounting accessories
Package/
Supports for fixing to the structure for AD1034 and
AD1038 1/1
AD1053
Connection accessory between two AD1080 AD1083 1/1

Ordering codes
Accessories
Marking
N Package/
No. 490 adhesive labels ø12mm symbol N EV1150 1/490
3 No. 490 adhesive labels ø12mm symbol L1 EV1151 1/490
No. 490 adhesive labels ø12mm symbol L2 EV1152 1/490
3
No. 490 adhesive labels ø12mm symbol L3 EV1153 1/490
No. 490 adhesive labels ø12mm symbol T EV1154 1/490
400 VOLT No. 10 triangular adhesive labels 125mm with 400V
EV1155 1/10
lightning arrow symbol
No. 300 triangular adhesive labels 50mm with lightning
EV1156 1/300
arrow symbol
EV1090 Brackets for anchoring cables

EV1091
EV1092 Adjustable cable blocking bracket can be mounted on sections with 10mm slot EV1050.
EV1093
Package/
No. 10 cable blocking brackets min÷max ø 9÷16mm EV1090 1/10
EV1050
Aluminium sliding guides for universal uses

EV1051
Package/
EV1056
EV1058 No. 10 aluminium supporting sections 30x15 -
EV1050 1/10
W=2000mm
EV1050
No. 25 fixing brackets for EV1050 EV1051 1/25
No. 100 aluminium M6 nuts for EV1050 EV1056 1/100
No. 100 aluminium M8 nuts for EV1050 EV1058 1/100

Accessories
Insert and keys
Package/
AA1560 AA6120 AA6200 Description Code No. of pieces
Wall-mounted structures and cable container
Box for closing doors with double-tab insert EV1008 1/1
ArTu W wall-mounted insert + Yale type key EV1036 1/1
3
Ronis 455 Insert + key for EV1008 EV1037 1/1
EV1008 AA6140
3mm double-tab insert + key for EV1008 EV1039 1/1
Floor-mounted structures
Double-tab insert AA6100 1/1
Double-tab Zn+Al+Mg alloy key AD1058 1/1
AA1570 AA6160 Yale insert + key AA6200 1/1
Male 6.4 triangular insert on ø 7.6 AA6120 1/1
Triangular key AA1560 1/1
Male 7square type insert; key not available AA6140 1/1
AA1560
Hexagonal 8 type insert embedded; key not available AA6180 1/1
FIST type insert (FIAT) AA6160 1/1
Fiat key AA1570 1/1
Ronis E739 insert + key AA8004 1/1
Ricambi
Package/
No. 10 hinges + screws for panels (spare part
AD1090 1/10
ACP468)
No. 10 plug + door key kits (spare part APT002) AD1091 1/10
ArTu handle complete with lock and cover AD1022 1/1
No. 10 Artu handle covers AD1070 1/10
No. 50 three-lobed M6 spare screws AD1033 1/50
No. 20 cage nuts AD1036 1/20
Spray paint for touching up RAL 7035 colour
VB7035 1/1
(400 ml can)
Polished flange for XT1 3P mounted on DIN rail AD3301 1/1

ArTu
T T T
T T T
T T T
Terminal boxes
3
ArTu L dim.800x600x165 (850x690x204) mm (external hxwxd) IP43 with modular panels
Code Description Q.ty
SL0800 Back structure 800x700x200mm (hxwxd) 1
MC0800 Blind riser h=800mm 1
PV0800 Glass door for structure h=800mm 1
AL2000 No.2 wall fixing brackets L 2
PM6672 Panel 72 mod.600x600mm (hxw) M, K 1
PC2600 Plain panel 200x600mm (hxw) M, K 1
GD1520 DIN rail, pitch 150/200mm 3

ArTu ArTu
T T T
T T T
T T T
Terminal boxes
3
ArTu L dim.1000x900x165 (1050x1080x204) mm (external hxwxd) IP43 with cable container, plate for Tmax T3-
XT3, modular panels Icw 16kA complete with busbar holder, 250A busbars and Unifix L
Code Description Q.ty Code Description Q.ty
Tmax T kit Tmax XT kit
SL1000 Back structure 1000x700x200mm (hxwxd) 1 SL1000 Back structure 1000x700x200mm (hxwxd) 1
MC1000 Blind riser h=1000mm 1 MC1000 Blind riser h=1000mm 1
PV1000 Glass door for structure h=1000mm 1 PV1000 Glass door for structure h=1000mm 1
PC2600 Plain panel 200x600mm (hxw) M, K 1 PC2600 Plain panel 200x600mm (hxw) M, K 1
PM2624 Panel 24 mod.200x600mm (hxw) M, K 3 PM2624 Panel 24 mod.200x600mm (hxw) M, K 3
PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 1 PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 1
MI1000 Riser CB side-by-side structures h=1000mm 1 MI1000 Riser CB side-by-side structures h=1000mm 1
VC1000 Cable container h=1000mm 1 VC1000 Cable container h=1000mm 1
PC1002 Blind door for cable container h=1000mm 1 PC1002 Blind door for cable container h=1000mm 1
LK3003 Kit wallT3 vert. in cable cont. 1 LX3003 Kit XT3 3/4 P vert. in cable cont. L wall 1
PC6401 Plain panel h=600mm 1 PC6401 Plain panel h=600mm 1
TL3000 Linear crosspiece for cable container 3 TL3000 Linear crosspiece for cable container 3
BP0630 No. 2 flat busbar holders 250-630A 2 BP0630 No.2 flat busbar holders 250-630A 2
BR0250 No. 2 flat busbars 250A 1 BR0250 No.2 flat busbars 250A 1
AL2000 No. 2 wall fixing brackets L 2 AL2000 No.2 wall fixing brackets L 2
AA1000 No. 2 fixing brackets wall side-by-side structures 1 AA1000 No.2 fixing brackets wall side-by-side structures 1
ED2969 4P busbar 24 modules 3 ED2969 4P busbar 24 modules 3
ED3132 Feeder+cable l=350mm 4P 100A 3 ED3132 Feeder+cable l=350mm 4P 100A 3
ED....(*) Connection L 1-L2-L3-N ED....(*) Connection L 1-L2-L3-N
GD1520 DIN rail, pitch 150/200mm 3 GD1520 DIN rail, pitch 150/200mm 3
AD1096 No. 4 horz./vert. wall wirimg duct metal support 1 AD1096 No. 4 horz./vert. wall wirimg duct metal support 1
GD1520 Din rail, pitch 150/200mm 3 GD1520 Din rail, pitch 150/200mm 3
(*)
For selection of the connection according to the circuit-breaker, see page 3/19.

ArTu ArTu ArTu
T T T T T T
T T T T T T
T T T T T T
Terminal boxes Terminal boxes
ArTu L Series dim.1000x1500x165 (1050x1770x204) mm (external hxwxd) IP43 with cable container, plate for
Tmax T3-XT3, modular panels Icw 16kA complete with busbar holder, 250A busbars and Unifix L
PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 2 PS4720 Panel 4 strum.72x72 200x600mm (hxw) M, K 2
LK3003 Kit wall T3 vert. in cable cont. 1 LX3003 Kit XT3 3/4 P vert. in cable cont. L wall 1
TL3000 Linear crosspiece for cable container 3 TL3000 Linear crosspiece for cable container 3
BP0630 No. 2 flat busbar holders 250-630A 2 BP0630 No.2 flat busbar holders 250-630A 2
BR0250 No. 2 flat busbars 250A 1 BR0250 No.2 flat busbars 250A 1
AD1096 No. 4 horz./vert. wall wirimg duct metal support 2 AD1096 No.4 horz./vert. wall wirimg duct metal support 2
(*)

ArTu
T T T
T T T
T T T
Terminal boxes
3
Terminal boxes
ArTu L Series dim.1600x600x195 (1750x690x240) mm (external hxwxd) IP43 with plate for No. 3 Tmax T3-XT3,
modular panels, 250A divider and Unifix L
ZL1000 Base strips for structure 1 ZL1000 Base strips for structure 1
ZL1001 Structure flanges 1 ZL1001 Structure flanges 1
LK3300 Kit floor for No. 3 T3 side-by-side 1 LX3300 Kit No.3 XT3 side-by-side L floor 1
AD1034 Horiz. busbar Kit 250A l=600mm 1 AD1034 Horiz. busbar Kit 250A l=600mm 1
AD1038 No. 2 divider fixing brackets AD1034 1 AD1038 No.2 divider fixing brackets AD1034 1
GD1520 Feeder+cable l=600mm parallel 4P 100A 3 GD1520 Feeder+cable l=600mm parallel 4P 100A 3
ED3090 No. 4 floor wiring duct supports 2 ED3090 No.4 floor wiring duct supports 2
AD1098 No.4 floor wiring duct supports 2 AD1098 No.4 floor wiring duct supports 2
(*)

ArTu ArTu
T T T
T T T
T T T
T T T
T T T
3 Terminal boxes
Terminal boxes
ArTu L Series dim.1600x900x195 (1750x1080x240) mm (external hxwxd) IP43 with cable container, plate for
Tmax T3-XT3, modular panels Icw 25kA complete with busbar holder, 400A busbars, connections to the
circuit-breaker, Unifix H and L
LK3000 T3 floor/wall Kit horiz.3/4P 1 LX3300 XT3 floor/wall Kit horiz.3/4P 1
ZL3000 Base strips for side-by-side ass. 1 ZL3000 Base strips for side-by-side ass. 1
ZL2001 Cable container flanges 1 ZL2001 Cable container flanges 1
AL2000 No. 2 wall fixing brackets L 1 AL2000 No. 2 wall fixing brackets L 1
AA1000 No. 2 fixing brackets wall side-by-side structures 1 AA1000 No. 2 fixing brackets wall side-by-side structures 1
ED3090 Feeder+cable l=600mm parallel 4P 100A 2 ED3090 Feeder+cable l=600mm parallel 4P 100A 2
TL2000 Scaled crosspiece x cable container 4 TL2000 Scaled crosspiece x cable container 4
PB0802 Scaled busbar holder In=800A (35 kA) 2 PB0802 Scaled busbar holder In=800A (35 kA) 2
BA0400 Busbar In=400A 2 BA0400 Busbar In=400A 2
KB1002 Connections T3 floor/wall 1 KB1002 Connections T3 floor/wall 1
AD1064 No. 12 joining screws l=27 x flat busbars up to 10mm 1 AD1064 No. 12 joining screws l=27 x flat busbars up to 10mm 1
AD1098 No. 4 floor wiring duct supports 2 AD1098 No. 4 floor wiring duct supports 2
(*)
For selection of the connection according to the circuit-breaker, see page 3/19 .

ArTu
T T T
T T T
T T T
T T T
3
Terminal boxes
ArTu L Series dim. 1800x600x195 (1950x690x240) mm (external hxwxd) IP43 with plate for Tmax T3-XT3 and
modular panels

LK3000 T3 floor/wall Kit horiz. 3/4P 1 LX3000 XT3 floor/wall Kit horiz. 3/4P 1
PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2 PM2624 Panel 24 mod. 200x600mm (hxw) M, K 2
AD1098 No. 4 supports for horiz./vert. floor-standing wiring duct 2 AD1098 No.4 supports for horiz./vert. floor-standing wiring duct 2

ArTu ArTu
ArTu
T T T
T T T
T T T
T T T
3 T T T
Terminal boxes
ArTu L Series dim. 1800x900x195 (1950x1080x240) mm (external hxwxd) IP43 complete with cable container
l=300mm, plate for Tmax T3-XT3 and modular panels
ZL3000 Base strips for side-by-side assembly 1 ZL3000 Base strips for side-by-side assembly 1
ZL2001 Cable container flanges 1 ZL2001 Cable container flanges 1
PO1831 Blind door 1800x300mm (hxw) L, M int. 1 PO1831 Blind door 1800x300mm (hxw) L, M int. 1
AD1098 No. 4 supports for horiz./vert. floor-standing wiring duct 3 AD1098 No.4 supports for horiz./vert. floor-standing wiring duct 3

ArTu
T T T T
T T T T
T T T T
T T T T
3
Terminal boxes
ArTu L Series dim. 1800x800x195 (1950x890x240) mm (external hxwxd) IP43 complete with internal cable
container w=200mm

MC1800 Blind riser h1800 1 MC1800 Blind riser h1800 1
ZL1101 Structure flanges w=800mm 1 ZL1101 Structure flanges w=800mm 1
PV1836 Glass door for structure 1800x800mm 36mod 1 PV1836 Glass door for structure 1800x800mm 36mod 1
LK3110 T3 floor/wall Kit horiz. 3/4P 1 LX3110 Kit floor XT3 Kit horiz. 3/4P 1
PC2800 Blind panel 200x800 (hxw) 1 PC2800 Blind panel 200x800 (hxw) 1
PC4800 Blind panel 400x800 (hxw) 1 PC4800 Blind panel 400x800 (hxw) 1
PM2836 Panel 36 mod. 200x800 2 PM2836 Panel 36 mod. 200x800 2
PM3872 Panel mod. h=300 l=800 pitch 150mm 2 PM3872 Panel mod. h=300 l=800 pitch 150mm 2
AL2000 No. 2 wall fixing brackets 1 AL2000 No.2 wall fixing brackets 1
GD1530 DIN rail, pitch 150/200mm w=36 mod.DIN 4 GD1530 DIN rail, pitch 150/200mm w=36 mod.DIN 4
EV1110 No. 50 angled supports 1 row of terminals 1 EV1110 No.50 angled supports 1 row of terminals 1
EV1119 No. 2 busbars 20x5 mm drilled and threaded M6 1 EV1119 No.2 busbars 20x5 mm drilled and threaded M6 1
W=2000mm W=2000mm

ArTu
3
Terminal boxes
ArTu L Series dim.1600x800x195 (1750x890x240)mm (external hxwxd) IP43 complete with internal cable
container w=200mm, plate for Tmax T3-XT3, and modular panels

ZL1101 Structure flanges w =800mm 1 ZL1101 Structure flanges w =800mm 1
VC1625 Int. cable container h=1600mm 1 VC1625 Int. cable container h=1600mm 1
PC2600 Blind panel 200x600 2 PC2600 Blind panel 200x600 2

ArTu
T T T
T T T
T T T
T T T
T T T
3
Morsettiere
Terminal boxes
ArTu L Series dim.1800x800x195 (1950x890x240)mm (external hxwxd) IP43 complete with internal cable
container w =200mm, plate for Tmax T3-XT3 and modular panels

ZL1101 Structure flanges w=800mm 1 ZL1101 Structure flanges w=800mm 1
VC1825 Internal cable container h=1800mm 1 VC1825 Internal cable container h=1800mm 1

General 4/2
Distribution systemse 4/13
Ordering codes 4/21
Technical catalogue | 1STC008001D0204 4/1

General
The ArTu M switchgear offers a simple and functional solution for constructing
secondary and terminal distribution switchgear for uses where the degree of protection
is important.
It can be wall or floor-mounted, only requiring assembly of the It is also possible to use the 150 mm centre distance, thereby
front door and side panels thanks to their characteristic monobloc considerably increasing the internal capacity, which reaches 4, 5,
structure. 6 and 8 DIN rows respectively.
Within the series, the wall-mounted switchgear is preset for
4 installation of System Pro M modular apparatus and Tmax T1, T2 The floor-mounted switchgear, on the other hand, has a depth
and T3 T serie up to T3 250 A, XT series up to XT3, (fixed version of 250 mm and is available in two functional widths (600 mm 24
with front terminals) moulded-case circuit-breakers up to 250A DIN modules and 800 mm 36 DIN modules or 24 DIN modules
and the Unifix wiring system. plus cable riser) in four heights (1400, 1600, 1800 and 2000 mm),
The wall-mounted models include two depths (150 and 200mm), corresponding to 7, 8, 9 and 10 DIN rows respectively, with 200
a functional width of 24 DIN modules (600 mm) and four different mm centre distance. Again in this case it is possible to use the
heights (600, 800, 1000 and 1200 mm), corresponding to 3, 4, 5 150 mm centre distance to increase the internal capacity, taking
and 6 DIN rows with 200 mm centre distance. this to 9, 10, 12 and 13 DIN rows respectively.

The sides of the M series floor-mounted switchgear consist of two removable side
panels, which allow lateral coupling of the structures or cable containers with useful
width of 300mm.
The modular System Pro M, and the Tmax up to T6 T serie up to to carry out fixing to the wall using dedicated brackets for the
T6 800 A, XT series up to XT4,(fixed version with front terminals) floor-mounted versions.
moulded-case circuit-breakers in the fixed version with front
terminals are found within the floor-mounted version. The busbar The 100 mm high base strip, complete with removable flanges,
systems with shaped section up to 800A, flat up to 630A and the is already mounted on the structure, and allows easy handling
4
Unifix cabling system can be used. with transpallets. Removable flanges for conductor inlet are also
provided in the top and bottom area.
The front door, available either made of transparent tempered The maximum rated current is 630 A and the degree of protection
glass applied from the inside, or of plain steel sheet, can be varies from IP31 (without front door) to IP65 (with front door).
replaced according to the different application requirements by
finishing frames with IP 31 degree of protection. It is also possible
Upper removable Cabling control is

flanges allow easy made easier thanks
access to lateral removable
panels
Wall-mounted Floor-mounted
D=115/165 D=195
Compliance with Standards CEI EN 60439-1/IEC 61439-1-2 CEI EN 60439-1/IEC 61439-1-2
Rated service voltage Ue up to 690 V up to 690 V
Rated insulation voltage Ui up to 1000 V up to 1000 V
Rated frequency 50-60 Hz 50-60 Hz
Rated impulse withstand voltage Uimp 6 kV 8 kV
Rated current In up to 250 A up to 630 A
Rated short-time short-circuit withstand current Icw up to 25 kA up to 35 kA
Rated peak short-circuit current Ipk up to 52.5 kA up to 74 kA
Degree of protection IP 65 with door 31 without door
65 with door

Rapid selection tables (W) (D)

24 mod. 24 mod. 36 mod.
W D
100
200 200 200
100
600 (W) (D)
24 mod.
300 300 300 W D
200 (H) H
(H) H
300
4
Structure
No. vert.
mod. No. of DIN mod. Overall external Functional
H=100mm which can be installed dimensions (1) dimensions (2) Wall structures Floor structures
DIN panel 150mm DIN panel 200mm (H) (W) (D) (3) H W D (3)
centre dist. centre dist. mm mm mm mm mm mm Basic version Basic version
6 96 (24x4) 72 (24x3) 700 700 150 600 600 115 SM6061 -
8 120 (24x5) 96 (24x4) 900 700 150 800 600 115 SM8061 -
700 200 600 165 SM8062 -
10 144 (24x6) 120 (24x5) 1100 700 200 1000 600 165 SM1062 -
12 192 (24x8) 144 (24x6) 1300 700 200 1200 600 165 SM1262 -
14 216 (24x9) 168 (24x7) 1596 724 250 1400 600 195 - SM1462
16 240 (24x10) 192 (24x8) 1796 724 250 1600 600 195 - SM1662
360 (36x10) 288 (36x8) 924 250 800 195 - SM1682
18 288 (24x12) 216 (24x9) 1996 724 250 1800 600 195 - SM1862
432 (36x12) 324 (36x9) 924 250 800 195 - SM1882
20 313 (24x13) 240 (24x10) 2196 724 250 2000 600 195 - SM2062
468 (36x13) 360 (36x10) 924 250 800 195 - SM2082
(L) (P)
L P
(H) H
Additional cable container W = 300mm

Overall external Functional Internal door External door Finishing
dimensions (1) dimensions (2) Structure front IP31 front IP65 Side panel section IP31
(H) (W) (D) H W D (3)
mm mm mm mm mm mm
1796 424 250 1600 300 195 VC1632 PO1631 PO1630 LF1625 See page 9/35
1996 424 250 1800 300 195 VC1832 PO1831 PO1830 LF1825
2196 424 250 2000 300 195 VC2032 PO2031 PO2030 LF2025
The cable container, placed at the side of the structure with the special kit (AD1012), keeps the IP65 degree of protection when installed with an external door.
The external doors are used on the additional cable container to be placed side by side with an ArTu structure with door (IP65). The internal doors are used on the additional
cable container placed side by side with an ArTu structure in the IP31 version (i.e. without door and with finishing profiles). This ensures uniformity of appearance between the
structure and additional cable container.
Furthermore, the internal doors can be used as internal segregations of the cable container: should a segregation with door of the additional cable container open be
requested, it is possible to mount both the internal and external door at the same time.

24 mod. 36 mod. 24 mod.
24 mod.
(1)
The overall dimensions of the ArTu M
switchgear starting from the 1400mm
Side covering Front doors Internal cable Finishing (1596mm) height include the base
IP65 IP65 container section IP31 strip h=100mm and the side panels.
Glass door Glass door 24 mod.+ Blind door (2)
The functional dimensions represent
Side panel 24/36 mod. int cable container 24/36 mod. the useful space for installing the
apparatus.
- PV6060 - PO6060 -
(3)
In this catalogue, reference is always
- PV8060 - PO8060 - made to the 150/200/250mm depths
- PV8060 - PO8060 - corresponding to the external overall
dimensions with front door.
- PV1060 - PO1060 -
The useful dimensions between panel
- PV1260 - PO1260 - and bottom of the structure are
115/165/195mm.
LF1425 PV1460 - PO1460 - See page 4/26
LF1625 PV1660 - PO1660 -
LF1625 PV1688 PV1680 PO1680 VC1622
LF1825 PV1860 - PO1860 -
LF1825 PV1888 PV1880 PO1880 VC1822
LF2025 PV2060 - PO2060 -
LF2025 PV2088 PV2080 PO2080 VC2022
(L) (P)
L P
(H) H
Structure for constructing IP40 switchgear for operating theatres

Overall external Functional Complete
dimensions (1) dimensions (2) structure (1) Spare parts
(H) (W) (D) H W D (3)
mm mm mm mm mm mm Glass door Blind door
100 700 200 1000 600 165 SM1069 PV4060 PO6069
The QSO switchgear for operating theatres is complete with brackets (AD1009 No. 4 pieces) for installation of the wiring duct, two DIN rail kits (GD6002 and PM2624 No. 2
pieces) and relative brackets for wall fixing (4 pieces), 2 air passage filters and closing box with Yale insert.

Solutions recommended for installation of the apparatus

Type of structure/Installation
Vertical on Vertical on
Apparatus DIN rail Vertical Horizontal DIN rail Vertical Horizontal
System Pro M modular apparatus
OT
OESA
OETL
4 Tmax T1 3/4 poles - fixed / front terminals
Tmax T1 4 poles - fixed / front terminals +RC mod. (1)
Tmax T4 4 poles - fixed / front terminals +RC mod.
Tmax T5 4 poles - fixed / front terminals +RC mod.
Busbar with Linear busbar holder ()

shaped section
Flat busbar Linear busbar holder
Unifix L () ()
Unifix H ()
Tmax XT1 4 poles - fxed / front terminals +RC mod. (1)
Tmax XT2 4 poles - fxed / front terminals +RC mod.
Tmax XT3 4 poles - fxed / front terminals +RC mod. (1)
Tmax XT4 4 poles - fxed / front terminals +RC mod.
Side-by-side Tmax XT kits
(1)
Only for structures D=200mm. - () Can only be installed in the structure. - () Can only be installed in the cable container.
Assembly solution
ArTu ArTu
300 PM3648 300 PM3648
Required distance between PC1600

100 H=300mm and panel H=200mm
300 PM3648
PM2624
200
PC2600 PC2600
200 200
Side-by-side assembly between a
H=300mm and a H=200mm panels is not allowed

System Pro M modular apparatus, Tmax T1-T2-T3, XT1 and XT3, OT≤ 160 and
supports for Unifix H
GD6002 AD1086 GD8002
PM6672
GD6008 GD6009
PM2624 PM3648 PM2836 PM3872
GC6002 GC8002
AD1600
W=600mm W=800mm
4
Panel Panel Panel DIN rail Panel Panel
H DIN rail kit 1 DIN row 2 DIN rows 3 DIN rows kit 1 DIN row 2 DIN rows
(mm) 24 DIN mod. 24 DIN mod. 48 DIN mod. 72 DIN mod. 36 DIN mod. 36 DIN mod. 72 DIN mod.
Standard aluminium version
200 GD6002 PM2624 GD8002 PM2836
300 GD6002 PM2312 GD8002 PM2315
300 GD6008 PM3648 GD6009 PM3872
600 3x GD6002 PM6672
Version fitted with accessories (complete with 60x80 wiring duct and AD1037 supports)
200 GC6002 PM2624 GC8002 PM2836
Reinforced version for Tmax and Tmax differential RC 222/1 mod. 200mm
200 GD6010(1) PM2624 GD8010 PM2836
Reinforced version Tmax + differential module (2)
300 GD6010(1) PM2312 GD8010 PM2315
300 AD1061 PM3624 AD1061 PM3836
(1) (2)
Cannot be installed on wall-mounted version. Version for Tmax with differential module underplaced RC 221/222.

05087 (60x80) 05087 (60x80)
AD1037 OFF
OFF
OFF
OFF 05087 (60x80)

AD1009
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
AP6001
05087 (60x80) AP6000
OFF
OFF
OFF
OFF
OFF
OFF
OFF
05085 (40x80)
GD6002
OFF
OFF
OFF
OFF
GD6008
OFF
GD8002
OFF
GD6002
OFF
OFF
OFF
OFF
GD6009
OFF
GD8002
Supports for horizontal wiring duct

Polished flange for Tmax XT2-XT4 positioned side by
Allows assembly of the cabling wiring duct horizontally up to 60x80mm. The side on plate
AD1009 plastic model can be positioned on the rear of the DIN rail, whereas
Code Description
the AD1037 metal version is fixed onto the brackets of DIN rail GD6002/
GD8002, and allows adjustment of the wiring duct depth.
Code Description AD3312 AD3312 Polished flange for plate-mounted XT4 3P
AD1009 Horizontal wiring duct (plastic) supports AD3313 AD3313 Polished flange for plate-mounted XT4 4P
AD1037 Horizontal wiring duct (metal) supports Tmax XT2-XT4 on DIN rail cannot be mounted in ArTu switchboards.
Depth adapter DIN window hole covers

Code Description Code Description
AP6001 No.1 depth adapter for Tmax T1-T2-T3-XT1-XT3 AD1086 DIN L=2000mm hole cover strip - grey RAL 7035
W=600mm wall-mounting AD1088 DIN 24 modules hole cover strip - grey RAL 7035
AP6000 No.1 depth adapter for Tmax T1-T2-T3-XT1-XT3 AD1089 DIN 36 modules hole cover strip - grey RAL 7035
W=600mm floor-standing

Fixed Fixed + RCD underneath
4 Circuit-breaker No. Dimensions 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod.
front terminals poles H (mm) W=600mm W=800mm W=600mm W=800mm
Wall-mounted structure
Tmax T3 3-4 200 KT3118 (1)
(2)
Tmax XT3 3 /4 200 KX3618 (1)
Floor-mounted structure
Tmax T1 3-4 200 KT1117
Tmax T1 4 200 KT1102
Tmax T2 3-4 200 KT2117
Tmax T2 4 200 KT2102 KL2103
Tmax T3 3-4 200 KT3112 KL3113
Tmax T3 4 300 KT3102 KL3103
Tmax T4 3-4 200 KT4112 KL4115
Tmax T4 4 200 KT4110 KL4116
Tmax T5 3-4 300 KT5112 KL5114
Tmax T5 4 300 KT5110 KL5116
Tmax T6 3-4 500 KT6113 KL6113
Tmax XT1 3(2)/4 200 KX1617
Tmax XT1 CB + RC mod. 4 200 KX1602
Tmax XT2 3(2)/4 200 KX2619
Tmax XT3 3(2)/4 200 KX3612 KL3613
Tmax XT3 CB + RC mod. 4 300 KX3602 KX3603
Tmax XT4 3(2)/4 200 KX4612 KX4615
Hole cover W=2000mm Article AD1086, 24 DIN modules AD1088, 36 DIN modules AD1088 , colour grey RAL 7035.
(1)
Kit for wall-mounted ArTu M D=200mm.
(2)
For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308
XT4 3P Flange for plate-mounting

Fixed Fixed + RCD underneath

Circuit-breaker No. Dimensions 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 4
TTmax T1-T2-T3-XT1-XT3 on DIN 35 rail (see page 4/7)
Tmax T3 3-4 300 KT3212
Tmax T4 3-4 400 KT4212
Tmax T4 4 500 KT4102
Tmax T5 3-4 400 KT5212 KL5212
Tmax T5 3-4 500 KT5102 KL5102
Tmax T6 3-4 500 KT6213 KL6213
Tmax XT1 3(1)/4 200 KX1618
Tmax XT1 N 3 CBs side by side 3(1)/4 200 KX1604
Tmax XT2 No.3/4(2) CBs side by side 3-4(3) 200 KX2604
Tmax XT3 3(1)/4 300 KX3614
Tmax XT4 3(1)/4 300 KX4614
Tmax XT4 No.3/4(3) CBs side by side 3/4(3) 300 KX4604
Tmax XT4CB + RC mod. 4 400 KX4602
Hole cover W=2000mm Article AD1086, 24 DIN modules AD1088, 36 DIN modules AD1088 , colour grey RAL 7035.
(1)
For 3 poles breakers please order accessory flange codes: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308
XT4 3P Flange for plate-mounting.
(2)
(3)
Order AD3310, AD3311, AD3312 and AD3313 polished flange.

PF.... FR.... PC.... PR.... PA....
4 Back plates Panels

Plain flat Plain recessed Plain flat Plain recessed Ventilated
H 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod.
(mm) W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=600mm
100 PC1600 PC1800 PA1600
200 PF2610(1) PF2810 FR2601 FR2801 PC2600 PC2800 PR2600 PR2800 PA2600
300 PC3600 PC3800
400 PF4610(1) PF4810 FR4601 FR4801 PC4600 PC4800 PR4600 PR4800
600 PC6600 PC6800 PR6600 PR6800
800 PC8600 PC8800
1600 PC1660 PC1680
1800 PC1860 PC1880
2000 PC2060 PC2080
(1)
Can also be installed on wall-mounted Artu M version D=200mm. Can be used to mount all the non-modular apparatus. For useful dimensions, please see page 7/20.

Minimum distance between back
plate and busbar holder
Recessed Recessed
Flat plate plate plate
min. 12,5
Recessed Recessed
Recessed panel
panel
panel
105
Flat Flat
Flat panel panel panel
40

Kit for OT200÷400
Dimensions (mm) 4
Description Code H W Poles Control Maximum length handle Minimum length shaft
Kit OT200/250/315/400 vertical KO2260 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12)
Kit OT200/250/315/400 horizontal KO2261 300 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12)
Kit OT200/250/315/400 vertical KO2280 400 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12)
Kit OT200/250/315/400 horizontal KO2281 600 600 E03-04 Decentralized 80mm (Ø6)-125mm (Ø12) 130mm (Ø6)-166mm (Ø12)

EV1135 EV1136

72x72mm 96x96mm 72x72mm 96x96mm
H 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod.
(mm) W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm
200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS4960 PS4968

Code Description


AD1044
AD1041
AD1055
AD1055
AD1041
AD1054
4
Installation on DIN rail Structure Internal cable container External cable container
Horizontal AD1054
Horizontal angled 45° AD1041
The ArTu switchgear is preset for assembly of terminal boxes with the sole exception of the models in the M wall-mounted series with 150mm depth.
EV1110 EV1112
EV1119
Code Angled supports for terminal boxes and earthing busbar


Modular dividers
Code AD1076 AD1080(1) AD1007 AD1081(2) AD1030 AD1031 AD1075 AD1006

In (A) 125 125 175 175 250 400 125 175
Icw (kA) 4.4 4.2 11 11 21 21 4.4 11
Version pole 1 1 1 1 1 1 3 3 4
max 35 35 70 70 120 185 35 70
2,5÷16 10 6 10 6 5 5 6 6
2,5÷25 2 2
No. DIN modules 2,5 1,5 2,5 2 3 3 4.5 4.5
Four-pole

In (A) 125 125 125 160 250 250
Icw (kA) 10 4.2 4.2 6.2 15 15
Ipk (kA) 24 25 25 20 30 30
1.5/6 4/neutral
1.5/10 2/phase 7 9 20x5mm) 20x5mm)
6/neutral
1.5/16 2
2.5/16 8
6/25 2 2 3
No. DIN modules 5,5 5 7 9 24 36
1500 Vdc
(1)
(2)

Flexible busbars up to 1000 A

Section
250 BF1602 1 395 323 250 20x3 60 2000 1,42
400 BF2502 1 498 460 400 20x5 100 2000 2,15
500 BF4002 1 660 620 500 24x6 144 2000 3

4
630 BF4012(1) 1 758 702 630 32x5 160 2000 3,36
1000 BF6302 1 1203 1140 1000 40x8 320 2000 6,33
(1)
Only for front extended terminals and rear terminals.

Section
520 BA0400 1 630 520 35 20x20 200 1730 4
830 BA0800 1 970 830 35 20x20 200 1730 4,4

Selection of busbar holders and crosspieces
1
Back of structure 2 Back of internal
or external cable cable container
container
3 Direct connection with

Unifix H
4
Crosspieces for fixing to structure
Busbars with shaped
Busbar holder section Structure Internal Additional cable
Type In ≤ 400÷800A Installation 24/36 DIN modules cable container container
Scaled up to 800A
PB0802 1 TR3001 (W=300mm)
BA0400
BA0800
2 TV2000 (W=200mm)
Linear up to 800A
PB0803 TV6200 (W=600mm)
1
TV8200 (W=800mm)
BA0400
BA0800
TV6200 (W=600mm)
3
TV8200 (W=800mm)
Selection and assembly of busbars with shaped section and busbar holders
Using the correct number of busbar holders ensures resistance to electrodynamic forces in the case of a short-circuit. Assess the maximum distance
(max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc.
1/4 X
1/4 X
The distance between the first busbar holder
and the end of the busbar must not exceed
1
/4 of “X”.

Busbar No. busbars X max X max X max X max X max X max X max
Linear
BA0400 400A PB0803 1 4 550 5 425 - - - - - - - - - -
BA0800 800A PB0803 1 4 550 4 550 - - - - - - - - - -
Scaled
BA0400 400A PB0802 1 4 550 4 550 - - - - - - - - - -
BA0800 800A PB0802 1 4 550 4 550 - - - - - - - - - -


capacity (A) Dimensions
Cross-section (A) Code phase IP31 IP43 (kA) (mm) (mm) (kg)
275 BR0250 1 290 275 23 15x5 1750 1,35
440 BR0400 1 475 440 23 25x5 1750 1,8
695 BR0630 1 750 695 32 30x10 1750 4,4

4
Busbar holders and crosspieces
1 Back of structure,
external cable container
Flat busbars Crosspieces for fixing to structure

Busbar holder
Type In = 250A In = 400A In = 630A Installation Structure Additional cable container
Linear up to 630A 1 TV6200 (W=600mm) TR3001 (W=300mm)
BP0630 TV8200 (W=600mm)
(1)
The busbar terminal protection covers must be ordered separately BP0632.

Selection and assembly of flat busbars and busbar holders
(max X) which must not be exceeded between two consecutive busbar holders according to the max. Icc.
1/4 X
X
4
1/4 X
The distance between the first busbar holder and
the end of the busbar must not exceed 1/4 of “X”.

Busbar No. busbars X max X max X max X max
Busbar Capacity holder per phase 25 kA (mm) 35 kA (mm) 50 kA (mm) 65 kA (mm)
BR0250 250A 1 11 175 15 125 18 100 - -
BR0400 400A BP0630 1 9 225 15 125 18 100 - -
BR0630 630A 1 9 225 15 125 18 100 - -
Flat drilled and threaded busbars for earthing connection

WxW Length AxB
5 20 6MA
EV1119 6 MA 20 20x5 2000
20
5 20 6MA
EV1120 6 MA 20 25x5 2000
25
5 25 6MA
EV1121 6MA 25 50x5 2000

50
EV1122 6MA 34x30

A
EV1123 8MA 34x30
B
EV1124 6MA 40x50
EV1125 8MA 40x50

Unifix systems
Rated current (In) central power supply 400A 100A
4 Maximum peak current (Ipk) 52,5kA-400V
Conditioned short-circuit Tmax T1 36kA-400V
current (Icc)
Tmax T2 N, S (1) 50kA-400V
Tmax T3 50kA-400V
Tmax XT1 50kA-400V
Tmax XT3 50kA-400V
S200M 10kA-400V
S200P 25kA-400V
Width 24/600 12/400
(No. modules/mm) 36/800 24/600
36/800

Frame for Tmax T and Tmax XT 300x600mm (HxW) ED2183
series
300x800mm (HxW) ED2191
Crosspiece for direct connection to W=600mm TL1000
W=800mm TL1100
with PB0803
18 mod. ED3009
24 mod. ED3017
36 mod. ED3025
18 mod. ED2951
24 mod. ED2969
36 mod. ED2977
36 mod. GD1530
(1)

Unifix systems
Circuit-breaker series Unifix H Unifix L
DS941 ED2654 L1/N 40A ED3272 L1/N 40A
ED2662 L2/N 40A ED3280 L2/N 40A
ED2670 L3/N 40A ED3298 L3/N 40A
S200 - DS200 (top power supply) (bottom power supply)
ED2549 L2 63A ED2590 L2 63A ED3041 L2 100A
ED2556 L3 63A ED2598 L3 63A ED3058 L3 100A 4
ED2564 N 63A ED2606 N 63A ED3066 N 100A
ED2557 L1 ≤32A
ED2558 L2 ≤32A
ED2559 L3 ≤32A
ED2560 N ≤32A
ED2551 L1 125A
ED2552 L2 125A
ED2553 L3 125A
ED2554 N 125A
ED2753 N 100A
MDRC - Various apparatus (top power supply) (low power supply)
ED2308 L2 ED2340 L2
ED2316 L3 ED2357 L3
ED2324 N ED2365 N

Unifix systems
with shaped
section.

module ED2209.
N
N
L1 L1
T T
L2 L2
N
L3
L3 N

Terminal capacity
35mm2.

module.
T T
N N

Ordering codes
Wall-mounted structures
Basic version
Dimensions (mm)
Package/
Monobloc structure 24 DIN mod - W=600mm
600 115 SM6061 1/1
800 115 SM8061 1/1
800 165 SM8062 1/1
1000 165 SM1062 1/1
4
1200 165 SM1262 1/1
IP40 version for operating theatre

The QSO switchgear for operating theatres is complete with brackets (AD1009 No. 4 pieces) for installation of the
wiring duct, two DIN rail kits (GD6002 and PM2624 No. 2 pieces) and relative brackets for wall fixing (4 pieces), 2 air
passage filters and closing box with Yale insert.
Dimensions (mm)
Package/
1000 165 SM1069 1/1
Embedding frame
Dimensions (mm)
Package/
H W Code No. of pieces
600 600 H70001 1/1
800 600 H70002 1/1
1000 600 H70003 1/1
1200 600 H70004 1/1

Ordering codes
LF....
Floor-standing structures
Basic version
SM....
Dimensions (mm)
Package/
1400 195 SM1462 1/1
1600 195 SM1662 1/1
1800 195 SM1862 1/1
2000 195 SM2062 1/1
4
1600 195 SM1682 1/1
1800 195 SM1882 1/1
2000 195 SM2082 1/1
800
Internal cable container for floor-mounted structures

Only to be ordered for the 36 DIN mod. structures (W=800mm). Consisting of a functional upright and a blind door
VC..22
complete with two key locks. Can be mounted either on the right or left.
Dimensions (mm)
Package/
H D W Code No. of pieces
Internal cable container for structure 36 DIN mod - W=800mm
1600 195 200 VC1622 1/1
1800 195 200 VC1822 1/1
2000 195 200 VC2022 1/1

VC..32
Floor-standing structures
Can be mounted either on the right or left.
Dimensions (mm)
PO..32 Package/
H D W Code No. of pieces
1600 195 300 VC1632 1/1
1800 195 300 VC1832 1/1
2000 195 300 VC2032 1/1 4
The additional cable container can be completed in the following ways:
- IP65 version with external, internal door (optional).
- IP31 version with internal door and finishing section (see page 4/26)
IP31 internal door for external cable container

Dimensions (mm)
Package/
1600 300 PO1631 1/1
1800 300 PO1831 1/1
2000 300 PO2031 1/1
IP65 side panels for structures and additional cable container

Dimensions (mm)
Package/
No.2 side panels 1400 195 LF1425 1/2
No.2 side panels 1600 195 LF1625 1/2
No.2 side panels 1800 195 LF1825 1/2
No.2 side panels 2000 195 LF2025 1/2

Ordering codes
600
Wall-mounted/Floor-standing structures
IP65 front glass doors for structures
Glass door 24/36 mod.
PV6060
PV8060 Door made of 15/10 thick steel sheet with 4 mm thick safety glass fitted with polyurethane gasket complete with
PV1060 handle with key with double tab. Reversible, can be hinged on the right or left.
PV1260
Dimensions (mm)
Package/
Wall-mounted IP65 glass door - 24 DIN mod
600 600 PV6060 1/1
4 600
800 600 PV8060 1/1
800 1000 600 PV1060 1/1
1200 600 PV1260 1/1
PV1460
PV1660 Floor-standing IP65 glass door - 24 DIN mod
PV1860
PV2060 1400 600 PV1460 1/1
PV1688 1600 600 PV1660 1/1
PV1888
PV2088 1800 600 PV1860 1/1
2000 600 PV2060 1/1
Floor-standing IP65 glass door - 36 DIN mod
1600 800 PV1688 1/1
1800 800 PV1888 1/1
2000 800 PV2088 1/1
Floor-standing IP65 glass door - external cable container
1600 300 PV1680 1/1
800 200
1800 300 PV1880 1/1
600
2000 300 PV2080 1/1
600 600 800 800

600 200
PV1680
PV1880
PV2080
600
800
1000 1400
1200 1600
1800
2000

600
IP65 front blind doors for structures
PO0660
PO0860 Blind door 24/36 mod.
PO1060 Door made of 15/10 thick steel sheet with 4 mm thick safety glass fitted with polyurethane gasket complete with
PO1260
handle with key with double tab. Reversible, can be hinged on the right or left.
Dimensions (mm)
Package/
Wall-mounted IP65 glass door - 24 DIN mod
600 600 PO6060 1/1
800 600 PO8060 1/1 4
300
1000 600 PO1060 1/1
1200 600 PO1260 1/1
PC1402 1400 600 PO1460 1/1
PC1602
PC1802 1600 600 PO1660 1/1
PC2002
1800 600 PO1860 1/1
2000 600 PO2060 1/1
1600 800 PO1680 1/1
1800 800 PO1880 1/1
2000 800 PO2080 1/1
Floor-standing IP65 glass door - external cable container
1600 300 PO1630 1/1
600
1800 300 PO1830 1/1
800
2000 300 PO2030 1/1
PO1460
PO1660 600 300 600 800
PO1860
PO2060
PO1680
PO1880
PO2080 600
800
1000 1400
1200 1600 1600
1600
1800 1800
1800
2000 2000
2000

Ordering codes
IP3031 IP 31 Finishing section
For IP31 version switchgear (without door), use the special finishing kits already sized for the standard heights
IP3160 and widths of ArTu switchgear. In the case of switchgear placed side by side, use the special double IP31 kit on
IP3181 the joining uprights.
IP3201
Vertical sections
No.2 IP31 vertical finishing 1400 IP3140 1/2
4 sections
sections
sections
sections
No.1 IP31double vertical 1400 IP3181 1/1
finishing section
finishing section
finishing section
IP3061 finishing section
IP3081
Horizontal sections
Dimensions (mm)
Package/
No.2 IP31 horizontal finishing 600 IP3061 1/2
sections
sections
sections
IP3142 IP3140
IP3162 IP3160
IP3183 IP3181
IP3203 IP3201

Kit for apparatus
Steel sheet panels complete with hinges placed on the right or left.
Dimensions (mm)
Package/
24 DIN mod - W=600mm
200 600
Panel for 4 instruments 72x72mm PS4720 1/1 4
200 800
Leght 600/800mm
PS4720/PS4728/PS4960/PS4968 PS2720/PS2728/PS2960/PS2968
68 68
92 92
68 68
199
92 199 92
596/796 596/796

EV1135 Package/
AD1086 1/10
AD1600 No. 3 holes covers 36 Din modules

AD1088 1/3
AD1800 grey RAL 7035 colour
AD1086 No. 3 holes covers 36 Din modules

AD1089 1/3
ZZ INO AD1088 grey RAL 7035 colour
A GA
LU CI M AD1089
No. 10 closing caps for instrument panel
EV1135 1/10
72x72mm
AD1101÷AD1104 No. 20 label-holders 24 DIN mod. AD1600 1/20
(1)

Ordering codes
Kit for apparatus

200
DIN rail kits for System Pro-M modular apparatus, Tmax T1-T2-T3-XT1-XT3 moulded-case
circuit-breakers and supports for Unifix H
GD6002
GD8002 300
150
DIN rail kit
Dimensions (mm)
Package/
GD6008 Description W Code No. of pieces
GD6009 200
24 DIN mod W=600mm
GD6010 DIN rail kit (aluminium) GD6002 1/1

GD8010 300
4 DIN rail kit centre dist. 150mm
(2 DIN rows)
GD6008 1/1
600
DIN rail kit reinforced for Tmax RC GD6010 1/1
AD1061 (1)
1/1
DIN rail kit with accessories GC6002
36 DIN mod W=800mm
DIN rail kit (aluminium) GD8002 1/1
DIN rail kit centre dist. 150mm
GD6009 1/1
(2 DIN rows) 800
DIN rail kit with accessories GC8002 (1) 1/1
(1)
Din rail kit with accessories includes 60x80 wiring duct and related AD1037 fixing supports.

Dimensions (mm)
Package/
Fixing supports for Unifix H series
600/800 AD1061 1/1
for panel H=300mm

Kit for apparatus
Modular panels
Steel sheet panels complete with hinges placed on the right or left
Dimensions (mm)
Package/
24 DIN mod W=600mm
Modular panel 1 DIN row - Tmax
300 PM2312 1/1
RC
Modular panel 1 DIN row only for
300 600 PM3624 1/1
4
Unifix H
Modular panel 2 DIN rows interaxis
300 PM3648 1/1
150mm
36 DIN mod W=800mm
Modular panel 1 DIN row - Tmax
300 PM2315 1/1
RC
Modular panel 1 DIN row only for 800
300 PM3836 1/1
Unifix H
300 PM3872 1/1
150mm
Width 600/800mm
PM3648/PM3872 PM2624/PM2836
74,5 =
199
150 299 =
74,5 432/634
596/796
432/634
596/796
Version for Tmax with mod. diff. Version for Unifix H

PM2312/PM2315 PM3624/PM3836
99.5
=
299 299
199.5
=
432/634 432/634
596/796 596/796
Width 600mm
PM6672
99,5
200
599
200
99,5
432
596

Ordering codes
05087 (60x80)
Kit for apparatus
AD1009 Supports for duct
05087(60x80) Package/
OFF
OFF
GD6002
No.4 plastic supports for horizontal duct AD1009 1/4
OFF
GD8002
No.4 metal supports for horizontal duct AD1037 1/4
4
OFF
OFF
OFF
OFF
05087 (60x80) Depth adapters
OFF
OFF
OFF
OFF
GD6008
Enables the depth of miniature circuit-breakers to be adapted to that of moulded-case circuit-breakers mounted
OFF
OFF
OFF
GD6009
on the same DIN rail.
OFF
05085(40x80)
Dimensions (mm)
OFF
OFF
OFF
Package/
OFF
OFF
OFF
OFF
OFF
OFF
Description W Code No. of pieces

OFF
No.1 depth adapter for Tmax

600 AP6000 1/1
T1-T2-T3 floor-standing
600 AP6001 1/1
T1-T2-T3 wall-mounting
05087(60x80)
AD1037
AP6001
OFF
OFF
OFF
AP6000
GD6002
GD8002
Blind back plates for and general apparatus
PF.... Dimensions (mm)

Package/
Description W H Code No. of pieces
24 DIN mod W=600mm
Blind back plate 200 PF2610(1) 1/1
(1)
FR.... Blind back plate 400 PF4610 1/1
600
Recessed blind back plate 200 FR2601 1/1
36 DIN mod W=800mm
800
(1)
Also for wall-mounted ArTu M version D=200mm.The panels must be ordered separately.

Kit for apparatus
Blind, recessed and ventilated panels for and general apparatus
PC.... Dimensions (mm)

Package/
24 DIN mod W=600mm
PR....
PA.... Blind panel 300 PC3600 1/1
Blind panel 400 PC4600 1/1 4
600
PC1860
PC1880
36 DIN mod W=800mm
800

Ordering codes
Kit for apparatus

Kits for installing Tmax circuit-breakers
Horizontal installation (front terminal)
Dimensions (mm)
Package/
Kit for T1 3-4 poles fixed 200 KT1117 1/1
Kit for T1 4 poles fixed + RC mod. 200 KT1102 1/1
4
Kit for T3 3-4 poles fixed 200 KT3118(1) 1/1
Kit for T5 4 poles fixed + RC mod. 300 600 KT5110 1/1
Kit XT1 3-4 poles fixed 200 KX1617(2) 1/1
Kit XT1 4 poles fixed + RC mod. 200 KX1602 1/1
Kit XT3 3-4 poles fixed 200 KX3618(1) (2) 1/1
Kit for T2 4 poles fixed + RC mod. 200 KL2103 1/1
Kit for T3 3-4 poles fixed 200 KL3113 1/1
Kit for T4 3-4 poles fixed 300 800 KL5114 1/1
Kit for T6 3-4 poles fixed 500 KL6113(2) 1/1
Kit XT3 3-4 poles fixed 200 KL3613 1/1
(2)
Kit XT4 3-4 poles fixed 200 KX4615 1/1
(1)
Kit for wall ArTu M D=200mm.
(2)

Kit for apparatus
Kits for installing Tmax circuit-breakers
Vertical installation (front terminal)
Dimensions (mm)
Package/
KT....
KL.... 24 DIN mod. - W=600mm
Kit on DIN rail for T1-T2-T3-XT1-XT3
200÷600 GD....(1) 1/1
3-4 poles fixed/RC.
GD.... Kit for T4 3-4 poles fixed 400 KT4212 1/1
4
Kit XT1 3-4 poles fixed 200 600 KX1618(4) 1/1
Kit XT1 N 3 CBs side by side 200 KX1604(4) 1/1
Kit XT1 N 3/4(3) CBs side by side 200 KX2604(2) 1/1
(4)
Kit XT3 3/4 poles fixed 300 KX3614 1/1
Kit XT3 4 poles fixed + RC mod 300 KX3609 1/1
Kit XT4 3/4 poles fixed 300 KX4614(4) 1/1
Kit XT4 N 3/4(3) CBs side by side 300 KX4604(2) 1/1
Kit for T5 4 poles fixed + RC mod. 500 800 KL5102 1/1
(1)
For the selection of kit for installation on DIN rail, see page 4/28
(2)
Order AD3310, AD3311, AD3312, AD3313 polished flange, see page 4/7.
(3)
(4)
Vertical
Kit for OT200÷400
Dimensions
(mm)
Package/
Description H W Control Code No. of pieces
Kit for OT200/250/315/400 - horizontal
installation
Kit for OT200/250/315/400 - vertical
installation
Horizontal
Kit for OT200/250/315/400 - horizontal
installation
Kit for OT200/250/315/400 - vertical
installation

Ordering codes
BA0400 Distribution system

Distribution busbars with shaped section
BA0800 Dimensions (mm)
Package/
Busbar In=400A 1730 BA0400 1/1
Busbar In=800A 1730 BA0800 1/1
4 PB0802 Busbar holders for busbars with shaped section

Package/
Scaled
PB0803
Linear

Package/
No.4 copper 400A branch joints AD1077 1/4
No.4 joints for joining busbars with shaped section
AD1068 1/4
400/800A
AD1068 AD1077
Hammer seal screws for busbars with shaped section

20
AD1056
Package/
27 No.12 M8 screws L=20mm for cable terminal AD1056 1/12
AD1064
No.12 M8 screws L=20mm for flat busbars up to
AD1064 1/12
Resting bases for busbars with shaped section

AD1065
Package/
No.4 resting bases for 400/800A busbars AD1065 1/4

Pic.1 Distribution system
Crosspieces for busbars with shaped section 400/800A
TR3001 Mounting Package/

TV6200
TV8200 Busbars vertically on back of structure
No.2 crosspieces structure
1 TV6200 1/2
W=600mm with PB0803
No.2 crosspieces structure
1 TV8200 1/2
W=800mm with PB0803
Busbars vertically on back of structure of external cable container
4
No.2 crosspieces back of cable
1 TR3001 1/2
container W=300mm with PB0802
Busbars vertically in internal cable container
No.2 internal cable container
2 TV2000 1/2
crosspieces W=200mm with PB0802
Pic.2
Connection to Unifix H system
No.2 structure crosspieces
3 TV6200 1/2
W=600mm with PB0803
No.2 structure crosspieces
TV2000 3 TV8200 1/2
W=800mm with PB0803
Pic.3
TV6200
TV8200

Ordering codes
BR0250 Distribution system

BR0400 Flat busbar
Copper busbars 1750mm in length drilled. Can be used both with linear BP0630 and scaled BP0634 busbar holders.
BR0630
Description (mm) W (A) Code No. of pieces
No.2 copper busbars 15x5 250 BR0250 1/2
No.2 copper busbars 25x5 1750 400 BR0400 1/2
No.2 copper busbars 30x10 630 BR0630 1/2
4 BP0630
BP0632
Busbar holders
Busbar holders in insulating self-extinguishing material, certified in conformity with the EN 60439-1 Standard for
an Icc≤35kA
Package/
No.2 linear busbar holders In=630A - 32kA BP0630 1/1
No.2 terminal covers for linear busbar holders
BP0632 1/1
BP0630
Pic.1 Crosspieces for flat busbars

Mounting Package/
Busbar vertically on back of structure or of cable container
TV6200
TV8200 No.2 crosspieces back of structure
1 TV6200 1/2
W=600mm with BP4466
No.2 crosspieces back of structure
1 TV8200 1/2
W=800mm with BP4466
No.2 crosspieces back of cable
container W=300mm with BP4466 or 2 TV8200 1/2
scaled BP4477
BP0632
Pic.2
TR3001

Distribution system
Flexible busbars
Flexible busbars insulated in self-extinguishing material
Description (mm) W (A) Code No. of pieces
No.2 flexible busbars, section 20x3 250 BF1602 1/2
2000
No.2 flexible busbars, section 32x5 630 BF4012 (1) 1/2
(1)
Only for circuit-breakers with front extended terminals or rear terminals.
4
EV1119 Earthing busbars

EV1120 Copper busbars drilled and threaded for rapid connection of the conductors.
Dimensions Package/
EV1121 Description (mm) W Code No. of pieces
No.2 earthing busbars 20x5 threaded M6 EV1119 1/2
No.2 earthing busbars 25x5 threaded M6 2000 EV1120 1/2
No.2 earthing busbars 50x5 threaded M6 EV1121 1/2
Insulators and copper busbars for neutral/earthing

Package/
No.50 hexagonal insulators 30x30mm M6 EV1122 1/50

Ordering codes
Distribution system
600
800
Unifix H
AD1061 Dimensions Package/
ED2183 Frames for Tmax
ED2191
No.2 fixing brackets onto structure for ED2183 o ED2091 AD1061 1/2
Feeder modules
4 ED2209 4P 400A feeder module (for ED2183-ED2191) ED2209 1/1
Basic module for DIN L1-L2 top 16A ED2902 1/1
ED2894
ED2902 Basic module for DIN L1-N bottom 16A ED2910 1/1
ED2928
ED2654
ED2670
ED2564-ED2556
ED2720-ED2738
ED2551-ED2552
ED2553-ED2554 Basic modules In 100A
ED2845
ED2572-ED2590

Distribution system
ED2217-ED2225
ED2258-ED2266
ED2332-ED2340
ED2373 1/1
4
RC221
ED0001
ED0002 Basic module false pole for solenoid operator ED2381 1/1
ED0003
ED2290-ED2308
ED2373 1/1
RC221

ED2381
ED2373 1/1
RC221
Accessories
ED2407
PM3624 Basic module false pole for DDA ED2845 1/1
PM3836
Basic module false pole for modular MDRC ED2852 1/1
No.2 IP20 covers (for ED2183-ED2191) W=173mm
ED2407 1/2
(10 DIN modules)
No.6 duct supports 40x60mm (only for modular
ED2936 1/6
apparatus)
ArTu M Kit for ED2183 and ED2191 PM3624 1/1
ED2936
Modular front panel 300x600mm (HxW) PM3836 1/1
Modular front panel 300x800mm (HxW)
No.10 terminal covers T1 ED0001 1/10
No.10 terminal covers S200/F200 ED0004 1/10

Ordering codes
Distribution system
600
800 Unifix L
ED2961
ED2962 Dimensions Package/
Description W (mm) Code No. of pieces
ED….
GD6002 2-poles busbars
4 4-poles busbars
2 poles 4 poles 100A 4P 12 module busbar 400 ED2944 1/6
N L1 N L1 L2 L3 100A 4P 18 module busbar 450 ED2951 1/6
ED3124 1/6
ED3033 single phase
ED3058
No.10 connections L1-N 40 A ED3272 1/10
No.10 connections L 1 100A ED3033 1/10
ED3104
ED3101
ED3102 No.10 connections L 3 100A ED3058 1/10
ED3103 No.10 connections N 100A ED3066 1/10
400 350
600 1500 No.10 single-pole power supply terminals L1 ED3101 1/10
800 2500
1500 No.10 single-pole power supply terminals L2 ED3102 1/10
No.10 single-pole power supply terminals L3 ED3103 1/10
No.10 single-pole power supply terminals N ED3104 1/10
Accessories
No.10 busbar covers (W=600mm) ED2961 1/10
ED3090 ED3132 ED3124
ED3439

Accessories
Kits for placing structures side by side
The ArTu M switchgear can be placed side by side laterally. The IP65 side-by-side kit consists of a set of supports
and a gasket for keeping the degree of protection.
In the IP31 version, in addition to kit AD1012, order the double finishing section (see table on page 4/26).
AD1012
Package/
Kit for laterally placing structures side by side
AD1012 1/1
H=1400-1600-1800-2000mm
AA1206 Brackets for wall fixinge

These allow ArTu M switchgear to be fixed to the wall.
Package/
No. 4 wall fixing brackets AA1206 1/4
Lifting eyebolts
These allow cabled switchgear to be lifted. They are made of steel treated withwhite passivated galvanisation.
Package/
SA1350 Description Code No. of pieces
No. 2 steel M12 lifting eyebolts AA9600 1/2
AA9600
Lifting reinforcements
Allow several pieces of ArTu M switchgear to be handled side by side.
Package/
No.2 lifting reinforcements for side-by-side structures SA1350 1/2

Ordering codes
Pic.1 Pic.2
300
Accessories
Crosspieces for accessories
250
Can be mounted on the structure to anchor the cables or to mount accessories. The crosspieces for accessories
can be mounted on the side, on the rear or in the cable container of the structure.
Mounting Package/
No. 2 Structure lateral crosspieces
1 TR2001 1/2
D=250mm
No. 2 External cable container rear
TR2001 2 TR3001 1/2
TR3001 crosspieces W=300mm
4
Pic.3 No. 2 Internal cable container
200 3 TV2000 1/2
crosspieces W=200mm
TR2000
Horizontal shelf
Non-supporting horizontal shelf which allows separations to be made inside floormounted ArTu M switchgear.
In structure with W=800 with internal cable container, use SH6001.
Dimensions (mm)
Package/
24 DIN mod
Horizontal shelf for structure 600 SH6001 1/1
36 DIN mod
Horizontal shelf for structure 600 SH8001 1/1
Diagram pocket
The diagram pocket (made of plastic RAL 2004 colour, dim. HxW 237x265mm type A4) is applied inside the blind
doors/panels of suitable dimensions, using the adhesive provided.
Package/
Plastic diagram pocket AA5600 1/1

AD1054 AD1041 Accessories
Package/
Structure
No. 2 supports for horizontal 45° angled terminal box AD1041 1/2
No. 2 supports for horizontal terminal box AD1054 1/2
AD1041 Internal cable container
No.4 supports for vertical terminal box AD1044 1/4
Additional cable container 4
No. 4 supports for vertical terminal box in internal/
AD1055 1/4
additional cable container
AD1044 AD1055
Angled supports for terminal boxes and earthing busbars

EV1110 Package/
No.50 angled supports 1 row of terminals EV1110 1/50
EV1112 No.10 angled supports 1 row of terminals EV2110 1/10
No.50 angled supports 1 row of terminals + earth EV1112 1/50
EV1119 No.10 angled supports 1 row of terminals + earth EV2112 1/10
TS4013 Sections for accessories

TS4011 Description W Code No. of pieces
No.2 sections EN50024 C30 2000 TS4011 1/2
TS4012 No.2 sections EN50035 G32 2000 TS4012 1/2

No.2 DIN sections EN50022 2000 TS4013 1/2
TS4000 No.2 cable rails 600 TS4000 1/2
TS4001
TS4002 No.2 cable rails 800 TS4001 1/2
TS4003
No.2 cable rails 1000 TS4002 1/2

Ordering codes
Accessories
Dividers
Package/
AD1080 AD1081 AD1030
AD1031 Single-pole
Modular 125A AD1076 (1) 1/1
Modular 125A AD1080 (2) 1/1
Modular 175A AD1007 (1) 1/1
(2)
4 Modular 250A AD1030 1/1
AD1075 AD1004
AD1006 Modular 125A AD1031 1/1
Three-pole
Four-pole
AD1028 AD1027
AD1029 Modular 125A-medium-93x89x48 (HxWxD) AD1028 1/1
Modular 125A-large-96x126x48 (HxWxD) AD1029 1/1
AD1035 Modular 160A AD1027 1/1
AD1034 (1)
AD1053
Amounting accessories
Package/
AD1038 1/1
AD1053

Accessories
Marking
N
Package/
3 No.490 adhesive labels ø12mm symbol N EV1150 1/490

No.490 adhesive labels ø12mm symbol L1 EV1151 1/490
No.490 adhesive labels ø12mm symbol T EV1154 1/490
400 VOLT
No.10 triangular adhesive labels 125mm with 400V
4
EV1155 1/10
No.100 triangular adhesive labels 20mm with light-
EV1156 1/300
ning arrow symbol

EV1091
EV1093
Package/
No.10 cable blocking brackets min÷max ø 9÷16mm EV1090 1/10
EV1050 No.5 cable blocking brackets min÷max ø 30÷48mm EV1092 1/5

EV1051
Package/
EV1056
EV1058 No.10 aluminium supporting sections 30x15 –
EV1050 1/10
W=2000mm
EV1050 No.25 fixing brackets for EV1050 EV1051 1/25
No.100 aluminium M6 nuts for EV1050 EV1056 1/100

Ordering codes
Accessories
Inserts and keys
Package/
Wall-mounted structures and cable container
Box + Yale insert (without tab) EV1008 1/1
Insert + Yale key for EV1008 EV1036 1/1
Ronis 455 insert + key for EV1008 EV1037 1/1
EV1008 AA6140
4 Floor-mounted structures
Double-tab Zn+Al+Mg alloy key AD1058 1/1
AA1560
Fiat key AA1570 1/1

Accessories
Spare parts
Package/
ZD2625 Description Code No. of pieces
ZD2825
ZD2325 No.10 hinges + screws for panels (spare part
AD1090 1/10
ACP468)
No.10 plug + door key kits (spare part APT002) AD1091 1/10
Chimes for door H=1400mm (spare part) CA1401 1/1
Chimes for door H=1800mm (spare part) CA1800 1/1 4
No.50 three-lobed M6 spare screws AD1033 1/50
RAL 7035 colour spray paint for touching up (400 ml
VB7035 1/1
spray can)
“ArTu Survival Kit” - Accessories and small items for
PV4060 1/1
spare parts
Glass door for switchgear for operating theatres PO6069 1/1
Blind door for switchgear for operating theatres AD1022 1/1
No.10 Artu handle covers AZ4000 1/4
No.4 base strip angle pieces H=100mm ZD2625 1/1
Base strip consisting of 4 angle pieces and 4 flanges ZD2825 1/1
Base strip consisting of 4 angle pieces and 4 flanges ZD2325 1/1
Base strip consisting of 4 angle pieces and 4 flanges AD1036 1/20
VB7035 1/1
spray can)

ArTu
T T T
T T T
4 ArTu M Series dim. 1100x600x200 (1130x700x200)mm (external hxwxd) IP65 with modular panels
SM1069 ArTu M structure 1000x600x200mm (hxwxd) QSO + acc. 1
ArTu
T T T
T T T
T T T
ArTu M Series dim. 600x600x150 (700x700x150) mm (external hxwxd) IP65 with modular panels
SM6061 ArTu M structure 600x600x150mm (hxwxd) 1
GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 3
PV6060 Glass door 600x600mm (hxw) M 1
AA1206 N °4 wall fixing brackets M 1
ArTu
T T T
T T T
T T T
T T T

ArTu
T T T
T T T
T T T
Terminal boxes
ArTu M Series dim. 800x600x200 (900x700x200) mm (external hxwxd) IP65 with modular panels 4
PC2600 Panel 24 mod.200x600mm (hxw) M, K 1
ArTu
T T T
T T T
T T T
T T T
Terminal boxes

PC2600 Blind panel 200x600mm (hxw) M, K 1

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
4

ArTu
T T T
T T T
T T T
Terminal boxes
Terminal boxes


ArTu
T T T
T T T
T T T
T T T
Terminal boxes
4

LF1425 No. 2 side panels 1400x250mm (hxd) M 1
ArTu
T T T
T T T
T T T
T T T
T T T
Terminal boxes


ArTu
T T T
T T T
T T T
T T T
T T T
Terminal boxes
4

PM6672 72 mod. Panel 600x600mm (hxw) M, K 2
PV1680 Glass door 1600x800mm (hxl) M 1
VC1622 Internal cable container 1600x200x250mm M 1
LF1625 No.2 side panels 1600x250mm (hxd) M 1

ArTu
T T T T T
T T T T T
T T T T T
Terminal boxes
4
ArTu M Series dim. 1600x800x250 (1796x924x250) mm (external hxwxd) IP65 with plate for Tmax T5 and
modular panels
KL5114 T5 horiz. fixed kit 300x800mm (hxw), M, K 1
PV1688 Glass door 36 mod. 1600x800mm (hxw) M 1

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
4
ArTu M Series dim. 1800x600x250 (1996x724x250) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and
modular panels, complete with 400A vertical busbars on back of structure - max. Icw 35kA

SM1862 ArTu M structure 1800x600x250mm (hxwxd) 1 SM1862 ArTu M structure 1800x600x250mm (hxwxd) 1
KT3112 T3 3/4P horiz. fixed kit not segregated M, K250 1 KX3612 XT3 3/4P horiz. fixed kit not segregated M, K250 1
PC2600 Blind panel 200x600mm (hxw) M, K 1 PC2600 Blind panel 200x600mm (hxw) M, K 1
GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5 GD6002 DIN rail kit not segregated 24 mod. w=600mm, K 5
PV1860 Glass door 1800x600mm (hxw) M 1 PV1860 Glass door 1800x600mm (hxw) M 1
LF1825 No. 2 side panels 1800x250mm (hxd) M 1 LF1825 No. 2 side panels 1800x250mm (hxd) M 1
AA1206 N °4 wall fixing brackets M 1 AA1206 N °4 wall fixing brackets M 1
PB0803 Linear busbar holder In=800A (35kA) 5 PB0803 Linear busbar holder In=800A (35kA) 5
TV6200 No. 2 rear crosspieces w=600mm 3 TV6200 No. 2 rear crosspieces w=600mm 3
AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 AD1064 No.12 joining screw M8 W=27mm flat busbars up 1
to10mm

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
4
modular panels, complete with 800A vertical busbars on back of internal cable container - max. Icw 35kA

KT3112 T3 3/4P horiz. fixed kit not segregated M, K250 1 KX3612 XT3 3/4P horiz. fixed kit not segregated M, K250 1
PV1880 Glass door 1800x800mm (hxw) M 1 PV1880 Glass door 1800x800mm (hxw) M 1
VC1822 Int. cable container 1800x200x250mm M 1 VC1822 Int. cable container 1800x200x250mm M 1
PB0802 Scaled busbar holder In=800A (35kA) 5 PB0802 Scaled busbar holder In=800A (35kA) 5
AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1 AD1064 No.12 joining screw M8 W=27mm flat busbars up 1
to10mm

ArTu
T T T T T
T T T T T
T T T T T
T T T T T
Terminal boxes
4

KL3113 T3 3/4P horiz. fixed kit not segregated M, K250 1 KL3613 XT3 3/4P horiz. fixed kit not segregated M, K250 1
PV1888 Glass door 36 mod. 1800x800mm (hxw) M 1 PV1888 Glass door 36 mod. 1800x800mm (hxw) M 1
AD1064 No.12 joining screw M8 W=27mm flat busbars up 1 AD1064 No.12 joining screw M8 W=27mm flat busbars up 1
to10mm to10mm

ArTu
T T T
T T T
T T T
T T T
T T T
Terminal boxes
4

KT5112 T5 horiz. fixed kit 300x600mm (hxw) M, K 1
PB0803 Linear busbar holder In=800A (35kA) 5
BA0800 Busbar In=800A 4
TV6200 No. 2 rear crosspieces w=600mm 3
AD1064 No.12 joining screw M8 W=27mm flat busbars up to10mm 1

ArTu
T T T
T T T
T T T
T T T
T T T
Terminal boxes
4
modular panels, complete with 800A vertical busbars on back of internal cable container - max. Icw 35kA

SM2082 ArTu M structure 2000x800x250mm (hxwxd)\ 1
KT5112 T5 horiz. fixed kit 300x800mm (hxw) M, K 1
VC2022 Int. cable container 2000x200x250mm M 1
PB0802 Scaled busbar holder In=800A (35kA) 5

ArTu
T T T T T
T T T T T
T T T T T
T T T T T
T T T T T
Terminal boxes
4
ArTu M Series dim. 2000x800x250 (2196x924x250)mm (external hxwxd) IP65 with plate for Tmax T5 and
modular panels, complete with 800A vertical busbars on back of structure- max. Icw 35kA

KL5114 T5 horiz. fixed kit 300x800mm (hxw) M, K 1
PV2088 Glass door 36 mod. 2000x800mm (hxw) M 1

ArTu K Modular Structures
General 5/2
Distribution systems 5/40
Ordering Code 5/53

General
The structure is made entirely of hot galvanised steel sheet, which guarantees the
equipotentiality of the switchgear.
The K series of ArTu switchgear consists of a series of - six depths (useful)

components for configuration of floor-standing kit switchgear, with 150 mm (for Tmax T6 up to fixed 630A S6) 225mm (for
the following dimensions: Tmax up to fixed 800A S6), 300mm (for Tmax T7 1600A),
- three heights (useful) 500 mm (for Tmax to fixed T71600A), 700mm (for Emax
1600 mm (16 modules of 100 mm), 1800 mm (18 modules up to withdrawable E3 3200A) and 900mm (for Emax up to
of 100 mm) and 2000 mm (20 modules of 100 mm) to which withdrawable E6 6300A). Tmax XT series can be installed in
the h=100mm base strip measurement fitted with removable each one of the above-mentioned depths.
flanges must always be added;
5 - four widths (useful) The structure is made entirely of hot galvanised steel sheet, which
390mm (12 DIN modules), 600 mm (24 DIN modules), 800 mm guarantees the equipotentiality of the switchgear. Base and top
(36 or 24 DIN) and 1000 mm (48 or 36 DIN modules + cable are supplied pre-mounted by means of a three-way joint, which
riser); is able to provide considerable structural rigidity. Base and top
5/2 1STC008001D0204 | Technical catalogue

The ArTu switchgear doors are made of 15/10 steel sheet for blind versions or with 4
mm thick glass fitted with gasket able to grant IP65 degree of protection.
are supplied pre-mounted by means of a three-way joint, which The switchgear is completed with:
is able to provide considerable structural rigidity. The base is - blind (IP65) and ventilated (IP41) type side panels;
fitted with removable flanges which allow entry into the areas - blind and transparent doors, fitted with safety glass which can
reserved for the cables and a pre-mounted (H=100mm) base be mounted on all sides (IP65).
strip, consisting of four angle irons with removable over the whole - kit for installing the apparatus, designed to integrate enclosure
perimeter. The four uprights are fitted with a multi-purpose hinge structures and circuit-breaker perfectly .
used to assemble the door and to couple the structures, both The mounting positions are established previously so as to
laterally and at the rear.
guarantee the insulation distances and perfect alignment of the
The structure is completed with two types of functional frames,
apparatus on the front panel. Furthermore, the kit plates are of 5
fitted with reference nicks (at 100 mm pitch) to avoid annoying
the self-centring type and are fitted with threaded bushings to
measurements during assembly of the apparatus kits:
- open functional frame (can be used in switchgear where no form provide easy assembly of the apparatus from the front.
of segregation is required); - DIN rail kit consisting of a drawn piece of aluminium able to
- closed functional frame (can be used in switchgear where forms 2-3 resist the load of the circuit-breakers fitted with fixing brackets
and 4 segregation are required).
390 600 800 1000

1600 - 1800 - 2000

General
Additional structure 300mm wide are available, which can be used as cable containers
placed side by side laterally with all the ArTu K switchgear.
(patented), preset to house the vertical and horizontal cabling right or on the left, and which guarantees panel earthing, making
duct. The aluminium DIN rail has three established mounting the equipotential connection superfluous.
positions, corresponding respectively to the, T and XT series The DIN panels are also available in the versions for one, two or
depths of the System Pro M, Tmax and Isomax circuit-breakers. three rows, corresponding to heights of 200, 300 and 600mm
It is fitted with double DIN 35 section (front and rear), and the respectively and can have 150/200mm centre distance between
rear part can be used to support the duct, up to 60x80mm; the rows.
- kit for air circuit-breakers consisting of sturdy supporting In the case of modular and moulded-case circuit-breakers placed
crosspieces and of the front panel; side by side in the same row, the special section must be used
5 - universal kits, consisting of back plates and blind front panels, which allows the assembly position of the circuit-breakers to be
which allow assembly of generic apparatus. adapted correctly so that the same modular panel can be used.
When the circuit-breakers do not take up the whole window of the
The panels have vertical 100mm modularity and are fitted with an panel, the spaces can be closed using the hole covers.
invisible hinge on the outside, which can be mounted either on the Within the K series of ArTu switchgear with 500, 700 and 900mm

Within the K series of ArTu switchgear with 500, 700 and 900mm depths, segregation
compartments of Form 2, 3 and 4 can be made in conformity with the IEC 60439-1
Standard.
depths, segregation compartments of Form 2, 3 and 4 can be The extremely compact dimensions of the system allow the
made in conformity with the IEC 60439-1 Standard, for the whole busbars to be mounted directly inside the switchgear, positioning
range of moulded-case circuit-breakers with rear terminals, simply them horizontally or vertically, on the back or on the side of the
by using the closed functional frame, the installation kits in the structure, keeping front access, also thanks to the practicality of
segregated version and the special segregations. the scaled type busbar holder.
The distribution systems, which can be used inside the ArTu

switchgear, consist of:
- shaped section busbars up to 3200A; 5
- flat busbars up to 6300A;
- flexible busbars;
- Unifix cabling system, structured up to 400A;
- dividers up to 400A.
The panels have The extremely

vertical 100mm compact
modularity and are dimensions of the
fitted with an system allow the
invisible hinge on busbars to
the outside, which be mounted
can be mounted directly inside
either on the the switchgear,
right or on the positioning
left, and which them horizontally
guarantees panel or vertically, on the
earthing, making back or on the side
the equipotential of the
connection structure.
superfluous.
Compliance with Standards CEI EN 60439-1/IEC 61439-1-2
Test of vibration for structure ArTu K according to IEC 60068-2-57 Standard
Test of antiseismic according to IEE Std 693 Standard
Rated service voltage Ue up to 1000 V
Rated insulation voltage Ui up to 1000 V
Rated frequency 50-60 Hz
Rated impulse withstand voltage Uimp 8 kV
Rated current In up to 6300 A
Rated short-time short-circuit withstand current Icw up to 105 kA
Rated peak short-circuit current Ipk up to 254 kA
Degree of protection IP 31 without door
41 without door with accessories
65 with door up to 4000A
41 with door up to 6300A

Rapid selection tables

12 mod. 24 mod. 36 mod. 24 mod. 48 mod. 36 mod. (W) (D)
W D
200
300
(H) H
100
100
Structure hight 1600/1800mm
5 No. mod. Base
vert.mod No. DIN modules External overall Functional Top Side flangers
H=100mm instailable dimensions (1) dimensions (2) Base strip base strip Upright
DIN panel DIN panel
150mm 200mm (H) (W) (D) (3) H W D (3) To be ordered
centre dist. centre dist. mm mm mm mm mm mm separately
240 (24x10) 192 (24x8) 748 600 SK6025 ZD1015
16 1831 287 1600 150 SK1600
360 (36x10) 236 (36x8) 948 800 SK8025 ZD1015
538 362 390 225 SK4040 ZD1025
538 437 390 300 SK4050 ZD1030
144 (12x12) 108 (12x9) 538 637 390 500 SK4060 ZD1050
538 837 390 700 SK4080 ZD1070
538 1037 390 900 SK4010 ZD1090
748 287 600 150 SK6025 ZD1015
748 362 600 225 SK6040 ZD1025
748 437 600 300 SK6050 ZD1030
288 (24x12) 216 (24x9)
748 637 600 500 SK6060 ZD1050
18 2031 1800 SK1800
748 837 600 700 SK6080 ZD1070
748 1037 600 900 SK6010 ZD1090
948 287 800 150 SK8025 ZD1015
948 362 800 225 SK8040 ZD1025
948 437 800 300 SK8050 ZD1030
432 (36x12) 324 (36x9)
948 637 800 500 SK8060 ZD1050
948 837 800 700 SK8080 ZD1070
948 1037 800 900 SK8010 ZD1090
432 (48x9) 1148 1037 1000 900 SK1010 ZD1090
(1) (4)
The overall external dimensions of the ArTu K switchgear include the base strip h=100mm and The VC.... code is already complete with the functional frame, therefore it is not necessary to
the side panels, each 14mm wide. order other open or closed functional frames. Furthermore, the internal cable container is only
(2)
The functional dimensions represent the useful space for installing the apparatus. built with 800/1000mm wide structures The rear intermediate upright SK2080 (H=2000mm) in
switchgear without segregation must be ordered separately if necessary for fixing onto the back
(3)
In this catalogue, reference is always made to the following depths: functional of crosspieces, accessories, busbars, etc
150/225/300/500/700/900 mm external 287/362/437/637/837/1037 mm.
The positioning of two structures or a structure and a cable container side-by-side is realized by the AD1014 kit. When selecting the
components, the characteristics of the apparatus to be mounted inside the switchgear must be taken into consideration, opting for the
open frame and cable container when no form of segregation is required and, on the contrary, for the closed frame and cable container
when forms of segregation from 2 to 4 are required. According to the type of covering selected, the degree of protection varies from
IP31/41 (switchgear without front door) to IP65 (switchgear with front door and blind side panels).
The functional frames of ArTu K switchgear are available in two versions:
- switchgear without segregation (open frame) in cases where no form of segregation is required;
- segregated switchgear (closed frame) in cases where forms 2-3 and 4 segregation are required

Reduced SK1880 12/24/36 mod. 24 mod. 12/24/36 mod.
frames SK2080 (to be ordered separately)
5
Functional frames switchgear Functional frames for Side coverings front
without segregation segregated switchgear and rear coverings IP65
Solution 3 (4) Solution 2 (4) Glass door Glass door Blind door
Solution 1 Solution 2 Internal cable Solution 1 Internal cable 12/24/36/48 24/36 mod. + int. 12/24/36/48
Open frame Open frame container Closed frame container Side panel mod. cable cont. mod. Rear panel
SK1604 (5) - - - - LF1626 PV1661 - PO1661 RF1660
SK1604 (5) - VC1624 - - LF1626 PV1682 PV1681 PO1681 RF1680
SK1804 (6) SK1803 - - - LF1840 PV1841 - PO1841 RF1840
(6)
SK1804 SK1803 - - - LF1850 PV1841 - PO1841 RF1840
SK1804 (6) SK1803 - SK1802 - LF1860 PV1841 - PO1841 RF1840
SK1804 (6) SK1803 - SK1802 - LF1880 PV1841 - PO1841 RF1840
SK1804 (6) SK1803 - SK1802 - LF1810 PV1841 - PO1841 RF1840
SK1804 (5) - - - - LF1826 PV1861 - PO1861 RF1860
SK1804 (6) SK1803 - - - LF1840 PV1861 - PO1861 RF1860
SK1804 (6) SK1803 - - - LF1850 PV1861 - PO1861 RF1860
SK1804 (6) SK1803 - SK1802 - LF1860 PV1861 - PO1861 RF1860
SK1804 (6) SK1803 - SK1802 - LF1880 PV1861 - PO1861 RF1860
SK1804 (6) SK1803 - SK1802 - LF1810 PV1861 - PO1861 RF1860
SK1804 (5) - VC1824 - - LF1826 PV1882 PV1881 PO1881 RF1880
(6)
SK1804 SK1803 VC1824 - - LF1840 PV1882 PV1881 PO1881 RF1880
SK1804 (6) SK1803 VC1824 - - LF1850 PV1882 PV1881 PO1881 RF1880
SK1804 (6) SK1803 VC1823 SK1802 VC1820 LF1860 PV1882 PV1881 PO1881 RF1880
(5)
Reduced functional frame, only for fixed Tmax T and XT series breakers ≤T6
(6)
With the reduced functional frame for fixed Tmax T and XT series circuit-breakers ≤ T6 or with
standard functional frame for all the circuit-breakers.
To complete the structure
Distribution System
Tmax kits for ArTu Tmax kits for ArTu Tmax kits for ArTu
DIN rail and reduced functional standard functional segregated functional Busbars with IP31/IP41
panels frame frame P≥225mm frame shaped section Flat busbars finishing section
Switchgears without
Page 5/16 Page 5/18 Page 5/20
segregation Page 5/42 Page 5/46 Page 5/59
Segregated switchgears Page 5/28 Page 5/30


12 mod. 24 mod. 36 mod. 24 mod. 48 mod. 36 mod. (W) (D)
W D
200
300
(H) H
100
100
Structure hight 2000mm

5 No. mod. Base
vert.mod No. DIN modules External overall Functional Top Side flangers
H=100mm instailable dimensions (1) dimensions (2) Base strip base strip Upright
DIN panel DIN panel
150mm 200mm (H) (W) (D) (3) H W D (3) To be ordered
centre dist. centre dist. mm mm mm mm mm mm separately
538 362 390 225 SK4040 ZD1025
538 437 390 300 SK4050 ZD1030
156 (12x13) 120 (12x10) 538 637 390 500 SK4060 ZD1050
538 837 390 700 SK4080 ZD1070
538 1037 390 900 SK4010 ZD1090
748 287 600 150 SK6025 ZD1015
748 362 600 225 SK6040 ZD1025
748 437 600 300 SK6050 ZD1030
312 (24x13) 240 (24x10)
748 637 600 500 SK6060 ZD1050
20 2231 2000 SK2000
748 837 600 700 SK6080 ZD1070
748 1037 600 900 SK6010 ZD1090
948 287 800 150 SK8025 ZD1015
948 362 800 225 SK8040 ZD1025
948 437 800 300 SK8050 ZD1030
468 (36x13) 360 (36x10)
948 637 800 500 SK8060 ZD1050
948 837 800 700 SK8080 ZD1070
948 1037 800 900 SK8010 ZD1090
480 (48x10) 1148 1037 1000 900 SK1010 ZD1090
(1) (4)
The overall external dimensions of the ArTu K switchgear include the base strip h=100mm and The VC.... code is already complete with the functional frame, therefore it is not necessary to
the side panels, each 14mm wide. order other open or closed functional frames. Furthermore, the internal cable container is only
(2)
The functional dimensions represent the useful space for installing the apparatus. built with 800/1000mm wide structures The rear intermediate upright SK1880 (H=1800mm) in
switchgear without segregation must be ordered separately if necessary for fixing onto the back
(3)
In this catalogue, reference is always made to the following depths: functional of crosspieces, accessories, busbars, etc
150/225/300/500/700/900 mm external 287/362/437/637/837/1037 mm.
The positioning of two structures or a structure and a cable container side-by-side is realized by the AD1014 kit. When selecting the
components, the characteristics of the apparatus to be mounted inside the switchgear must be taken into consideration, opting for the
open frame and cable container when no form of segregation is required and, on the contrary, for the closed frame and cable container
when forms of segregation from 2 to 4 are required. According to the type of covering selected, the degree of protection varies from
IP31/41 (switchgear without front door) to IP65 (switchgear with front door and blind side panels).
The functional frames of ArTu K switchgear are available in two versions:
- switchgear without segregation (open frame) in cases where no form of segregation is required;
- segregated switchgear (closed frame) in cases where forms 2-3 and 4 segregation are required

Reduced SK1880 12/24/36 mod. 24 mod. 12/24/36 mod.
frames SK2080 (to be ordered separately)
5
Functional frames switchgear Functional frames for Side coverings front
without segregation segregated switchgear and rear coverings IP65
Solution 3 (4) Solution 2 (4) Glass door Glass door Blind door
Solution 1 Solution 2 Internal cable Solution 1 Internal cable 12/24/36/48 24/36 mod. + int. 12/24/36/48
Open frame Open frame container Closed frame container Side panel mod. cable cont. mod. Rear panel
SK2004 (6) SK2003 - - - LF2040 PV2041 - PO2041 RF2040
(6)
SK2004 SK2003 - - - LF2050 PV2041 - PO2041 RF2040
(6)
SK2004 SK2003 - SK2002 - LF2060 PV2041 - PO2041 RF2040
(6)
SK2004 SK2003 - SK2002 - LF2080 PV2041 - PO2041 RF2040
(6)
SK2004 SK2003 - SK2002 - LF2010 PV2041 - PO2041 RF2040
SK2004 (5) - - - - LF2026 PV2061 - PO2061 RF2060
(6)
SK2004 SK2003 - - - LF2040 PV2061 - PO2061 RF2060
(6)
SK2004 SK2003 - - - LF2050 PV2061 - PO2061 RF2060
(6)
SK2004 SK2003 - SK2002 - LF2060 PV2061 - PO2061 RF2060
(6)
SK2004 SK2003 - SK2002 - LF2080 PV2061 - PO2061 RF2060
(6)
SK2004 SK2003 - SK2002 - LF2010 PV2061 - PO2061 RF2060
SK2004 (5) - VC2024 - - LF2026 PV2082 PV2081 PO2081 RF2080
(6)
(6)
(6)
SK2004 SK2003 VC2023 SK2002 VC2020 LF2060 PV2082 PV2081 PO2081 RF2080
(6)
(6)
(6)
(5)
Reduced functional frame, only for fixed Tmax T and XT series breakers ≤T6
(6)
With the reduced functional frame for fixed Tmax T and XT series circuit-breakers ≤ T6 or with
standard functional frame for all the circuit-breakers.
To complete the structure
Distribution System
Tmax kits for ArTu Tmax kits for ArTu Tmax kits for ArTu
DIN rail and reduced functional standard functional segregated functional Busbars with IP31/IP41
panels frame frame P≥225mm frame shaped section Flat busbars finishing section
Switchgears without
Page 5/16 Page 5/18 Page 5/20
segregation Page 5/42 Page 5/46 Page 5/59
Segregated switchgears Page 5/28 Page 5/30


(W) (D)
W D
(H) H

5 Overall external Functional Base/Top Side flanges for Side covers,
dimensions (1) dimensions (2) Base strip base strip Uprights front and rear covers
Blind side Internal External Finishing
(H) (W) (D) (3) H W D (3) Ordered door front door front door Rear panel section
mm mm mm mm mm mm separately IP65 IP31 IP65 IP65 IP31/41
1831 448 287 1600 300 150 VC3025 ZD1015 SK1600 LF1626 PO1631 PO1633 RF1630
287 150 VC3025 ZD1015 LF1826
362 225 VC3040 ZD1025 LF1840
437 300 VC3050 ZD1030 LF1850
2031 448 1800 300 SK1800 PO1831 PO1833 RF1830
637 500 VC3060 ZD1050 LF1860
837 700 VC3080 ZD1070 LF1880
1037 900 VC3010 ZD1090 LF1810 See
287 150 VC3025 ZD1015 LF2026 page 5/59
362 225 VC3040 ZD1025 LF2040
437 300 VC3050 ZD1030 LF2050
2231 448 2000 300 SK2000 PO2031 PO2033 RF2030
637 500 VC3060 ZD1050 LF2060
837 700 VC3080 ZD1070 LF2080
1037 900 VC3010 ZD1090 LF2010
(1) (3)
The overall external dimensions of the ArTu K switchgear include the base strip h=100mm and In this catalogue, reference is always made to depths 287/362/437/637/837/1037mm
the side panels, each 14mm wide. corresponding to overall external dimensions 150/225/300 500/700/900mm.
(2)
The functional dimensions represent the useful space for installing the apparatus.
Additional structure 300mm wide are available, which can be used as cable containers placed side by side laterally with all the ArTu K
switchgear. In the same way as the structures, the additional cable container is made up of a base, top, base strip and uprights and is
fixed to the structures using the side-byside kits (AD1014). It is completed with the side panels and the doors (to be ordered separately).
The external doors are used on the additional cable container to be placed side by side with an ArTu structure with door (IP65); the
internal doors are used on the additional cable container placed side by side with an ArTu IP31 version structure (i.e. without door and
with finishing sections). This ensures uniformity of appearance between the structure and additional cable container. Furthermore, the
internal doors can be used as internal segregations of the cable container: should a segregation with door open of the additional cable
container be requested, it is possible to mount both the internal and external door at the same time.

(W) (D)
W D
(H) H
Angle square
Overall external Functional Base/Top/ 5
dimensions (1) dimensions (2) Base strip Uprights Side covers
(H) (W) (D) (3) H W D (3)
mm mm mm mm mm mm Blind side panel IP65
637 637 500 500 SK6600 LF1860
2031 837 837 1800 700 700 SK8800 SK1815 LF1880
1037 1037 900 900 SK1100 LF1810
637 637 500 500 SK6600 LF2060
2231 837 837 2000 700 700 SK8800 SK2015 LF2080
1037 1037 900 900 SK1100 LF2010
(1) (3)
The overall external dimensions of the ArTu K switchgear include the base strip h=100mm. In this catalogue reference isalways made to the following depth: functional 500/700mm external
(2)
The functional dimensions represent the useful space for installing the apparatus. 637/837mm.
Example of use
LF.... To avoid problem in opening
the switchgear, please do not
mount the doors with the
handles close together


Type of structure/installation
Switchgear without segregation Segregated switchgear
D=150mm D=225mm D=300mm D=500mm D=700mm D=900mm D=500mm D=700mm D=900mm
Moulded-case circuit-breakers
Tmax T series Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic.
System Pro M modular apparatus
front fixed
terminals fixed+mod.diff
Tmax T1
rear
fixed
terminals
fixed
front
plug-in
terminals
5 Tmax T2 fixed+diff. mod.
rear fixed
terminals plug-in
fixed
front
plug-in
terminals
fixed+diff. mod.
Tmax T3
fixed
rear
plug-in
terminals
fixed+diff. mod.
fixed
front plug-in
terminals withdrawable
fixed+diff. mod.
Tmax T4
fixed
rear plug-in
fixed+diff. mod.
fixed
front
plug-in
terminals
withdrawable
Tmax T5
fixed
rear
plug-in
terminals
withdrawable
front fixed
Tmax T6
rear fixed
front fixed
Tmax T7
rear fixed
front
fixed
terminals
Tmax T8
rear
fixed
terminals

Moulded-case circuit-breakers
Tmax XT series Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic.
front fixed
terminals fixed+diff. mod.
Tmax XT1
rear
fixed
terminals
front fixed
terminals plug-in
Tmax XT2
rear fixed
terminals plug-in 5
front fixed
Tmax XT3
rear fixed
terminals plug-in
front fixed
Tmax XT4 fixed

rear
plug-in
terminals
withdrawable
Air circuit-breakers
Emax series Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic.
fixed
Emax X1 front terminals
withdrawable
Emax fixed
rear terminals
E1-E2-E3 withdrawable
fixed
withdrawable
Emax E4 rear terminals fixed full size
withdrawable

full size
fixed
Emax E6 rear terminals
withdrawable
front terminals fixed
Emax E1.2 fixed
rear terminals
withdrawable
fixed/interl. (2)
Emax E2.2 rear terminals
withdr./interl. (2)
fixed/interl. (1) (2) (1) (2)
withdr./interl. (1) (2) (1) (2)
fixed 50%
withdr. 50%
Note: A 1600 A busbar system can only be installed in a D=300 mm structure in conjunction with the small-size frame.
A standard frame must be used in the column with a 1600A main circuit-breaker.
(1)
Busbars system 3200A.
(2)
Busbars system 4000A.

Solutions recommended for installation of equipped apparatus

Switchgear without segregation Switchgear without segregation
D=225mm D=300mm D=500mm D=700mm D=900mm D=500mm D=700mm D=900mm

Tmax moulded-case circuit-breakers
interlocked, interlocked motor operated Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic.
Tmax T1 front terminal fixed
front terminal fixed

Tmax T2
rear terminal fixed
fixed
front terminal
plug-in
Tmax T3
fixed
5 rear terminal
plug-in
fixed
front terminal plug-in
withdrawable
Tmax T4
fixed
rear terminal plug-in
withdrawable
fixed
withdrawable
Tmax T5
fixed
withdrawable
fixed
front terminal
withdrawable
Tmax T6
fixed
rear terminal
withdrawable
fixed
front terminal
withdrawable
Tmax T7
fixed
rear terminal
withdrawable

Tmax XT1

Tmax XT2

Tmax XT3

Solutions recommended for installation of equipped apparatus
Switchgear without segregation Switchgear without segregation
D=225mm D=300mm D=500mm D=700mm D=900mm D=500mm D=700mm D=900mm

Tmax moulded-case circuit-breakers
interlocked, interlocked motor operated Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic. Horiz. Vertic.
fixed
Tmax T3 withdrawable
fixed
rear terminal
plug-in
fixed
front terminal 5
plug-in
Tmax T4
fixed
rear terminal
plug-in
fixed
withdrawable
Tmax T5
fixed
withdrawable
fixed
front terminal
withdrawable
Tmax T6
fixed
rear terminal
withdrawable
front terminal withdrawable
Tmax T7 fixed
rear terminal
withdrawable
plug-in
Tmax XT1
plug-in
plug-in
Tmax XT3
plug-in
plug-in
Tmax XT4
plug-in
Note: A 1600 A busbar system can only be installed in a D=300 mm structure in conjunction with the small-size frame.
A standard frame must be used in the column with a 1600 A main circuit-breaker.

System Pro M modular apparatus Tmax T1-T2-T3-XT1-XT3 moulded-case circuit-

breakers, OT≤160 A and Unifix H supports
GD6002 PM6672 GD8002
GD6011 GD6008 AD1086 GD6009

PM2624 PM3648 PM2836 PM3872
GC6002 GC8002
GD4002 PM2424
AD1600
W=390mm W=600mm W=800mm W=1000mm

DIN rail Panel DIN rail Panel Panel Panel DIN rail Panel Panel DIN rail Panel
kit 1 DIN row kit 1 DIN row 2 DIN rows 3 DIN rows kit 1 DIN row 2 DIN rows kit 1 DIN row
H (mm) 12 DIN mod. 12 DIN mod. 24 DIN mod. 24 DIN mod. 48 DIN mod. 72 DIN mod. 36 DIN mod. 36 DIN mod. 72 DIN mod. 48 DIN mod. 48 DIN mod.
5
Standard version in aluminum
200 GD4002 PM2424 GD6002 PM2624 GD8002 PM2836 GD1000 PM2010
300 (1) GD6002 PM2312 GD8002 PM2315
300 (2) GD6002 PM3424 GD6008 PM3648 PM3872
600 3x GD6002 PM6672
Equipped versions (complete with wiring duct 60x80 and AD1037 supports)
200 GC6002 PM2624 GD8002 PM2836
Reinforced version for Tmax and Tmax RC 222/1 residual current mod. 200mmm
200 GD6010(2) PM2624 GD8010 PM2836
Reinforced version for Tmax (2) and Tmax RC 222/1
300 (1) GD6010(2) PM2312 GD8010 PM2315
300 AD1061 PM3624 AD1061 PM3836
(1)
(2)
Only for System Pro M modular apparatus.

05087 (60x80) 05087 (60x80)
AD1037 OFF
OFF
OFF
OFF 05087 (60x80)

AD1009
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
AP6001
05087 (60x80) AP6000
OFF
OFF
OFF
OFF
OFF
OFF
OFF
05085 (40x80)
GD6002
OFF
OFF
OFF
OFF
GD6008
OFF
GD8002
OFF
GD6002
OFF
OFF
OFF
OFF
GD6009
OFF
GD8002
Supports for horizontal wiring duct Polished flange for Tmax XT2-XT4 positioned side by
Allows assembly of the cabling wiring duct horizontally up to 60x80mm. The side on plate
AD1009 plastic model can be positioned on the rear of the DIN rail, whereas Code Description
the AD1037 metal version is fixed onto the brackets of DIN rail GD6002/ AD3310 AD3310 Polished flange for plate-mounted XT2 3P
GD8002, and allows adjustment of the wiring duct depth. AD3311 AD3311 Polished flange for plate-mounted XT2 4P
Code Description
AD1009 Horizontal wiring duct (plastic) supports
Tmax XT2-XT4 on DIN rail cannot be mounted in ArTu switchboards.
AD1037 Horizontal wiring duct (metal) supports
Depth adapter DIN window hole covers

Code Description Code Description
AP6000 No.1 depth adapter for Tmax T1-T2-T3-XT1-XT3 W=600mm floor-standing AD1086 DIN L=2000mm hole cover strip - grey RAL 7035
AD1088 DIN 24 modules hole cover strip - grey RAL 7035
AD1089 DIN 36 modules hole cover strip - grey RAL 7035

STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with reduced frames
Fixed Fixed + RC mod. underneath

Circuit-breaker No. Dimensions 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod.
Tmax T1 3/4 200 KT1117 5
Tmax T1 4 200 KT1102 (1)
Tmax T2 3/4 200 KT2117
Tmax T2 4 200 KT2102 KL2103
Tmax T3 3/4 200 KT3112 KL3113
Tmax T3 4 300 KT3102 KL3103
Tmax T4 3/4 200 KT4112 KL4115
Tmax T4 4 200 KT4110 KL4116
Tmax T5 3/4 300 KT5112 KL5114
Tmax T5 4 300 KT5110 KL5116
Tmax T6 3/4 500 KT6113 KL6113
Tmax XT1 3(2)/4 200 KX1617
Tmax XT1 4 200 KX1602
Tmax XT2 3(2)/4 200 KX2619
Tmax XT2 4 200 KX2602
Tmax XT3 3(2)/4 200 KX3612 KL3613
Tmax XT3 4 300 KX3602 KX3603
Tmax XT4 3(2)/4 200 KX4612 KX4615
Tmax XT4 4 200 KX4610
Hole covering strip L =200mm AD1086, 24 DIN ,od. AD1088, 36 DIN mod. AD1089, RAL 7035 color.
(1)
(2)
For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for plate-mounting - AD3308


Fixed Fixed + RC mod. underneath

Circuit-breaker No. Dimensions 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod.
5 Tmax T1-T2-T3-XT1-XT3 on DIN rail 35 200 (see page 5/16)
Tmax T3 3/4 300 KT3212
Tmax T4 3/4 400 KT4212
Tmax T4 4 500 KT4102
Tmax T5 3/4 400 KT5212 KL5212
Tmax T5 4 500 KT5102 KL5102
Tmax T6 3/4 500 KT6213 KL6213
Tmax XT1 3(1)/4 200 KX1618
Tmax XT1 4 300 KX1603
Tmax XT1 No. 3 CBs side by side 3(1)/4 200 KX1604
Tmax XT2 No. 3/4(2) CBs side by side 3/4(3) 200 KX2604
(1)
Tmax XT3 3 /4 300 KX3614
Tmax XT3 4 300 KX3609
Tmax XT4 3(1)/4 300 KX4614
Tmax XT4 4 400 KX4602
Tmax XT4 No. 3/4(3) CBs side by side 3/4(3) 300 KX4604
Hole covering strip L =200mm AD1086, 24 DIN ,od. AD1088, 36 DIN mod. AD1089, RAL 7035 color.
(1)
(2)
(3)
Kit for OT160÷400
Dimensions
(mm)
Apparatus of the OETL series up to 400A and OESA up to 160 A (in both cases not motor operated) can be installed inside the floor-mounted ArTu K switchgear. According
to the dimensions of the apparatus, a plain back plate must be used (PF or FR…) and a panel (PC or PR…) of appropriate height and depth must be used. The useful space
between panel and door is 50mm. For larger-sized handles, use plain recessed panels PR… (see dimensions in table).

PF.... FR.... PC.... PR.... PA....
Back plates Panels

Plain flat Plain recessed Plain flat Plain recessed Ventilated
24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod.
H (mm) W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=600mm 5
100 PC1600 PC1800 PA1600
200 PF2610 PF2810 FR2601 FR2801 PC2600 PC2800 PR2600 PR2800 PA2600
300 PC3600 PC3800
400 PF4610 PF4810 FR4601 FR4801 PC4600 PC4800 PR4600 PR4800
600 PC6600 PC6800 PR6600 PR6800
800 PC8600 PC8800
1600 PC1660 PC1680
1800 PC1860 PC1880
2000 PC2060 PC2080
Can be used to mount all the non-modular apparatus.
Useful internal space Minimum distance between back plate and

busbar holder
Flat
plate Recessed Recessed
Recessed
plate plate
panel
Recessed
panel
Flat Flat Flat
panel panel panel

STRUCTURES WITHOUT SEGREGATION - Kit for switchgear with standard

frames D≥225mm
Fixed Fixed + RCD mod. underneath Plug-in Withdrawable

Front or rear No. Dimensions 12 DIN mod. 24 DIN mod. 36 DIN mod. 12 mod. DIN 24 mod. DIN 36 mod. DIN 12 mod. DIN 24 mod. DIN 24 mod. DIN
CB terminals poles H (mm) W=390mm W=600mm W=800mm W=390mm W=600mm W=800mm W=390mm W=600mm W=600mm
Tmax T1 3/4 200 KT1411 KT1111
5
Tmax T1 4 200 KT1401(1) KT1101(1) KL1102(1)
Tmax T2 3/4 200 KT2411 KT2111 KT2421 KT2121
Tmax T2 4 200 KT2401(*) KT2101(*) KL2104(*)
Tmax T3 3/4 200 KT3419 KT3119 KL3114 KT3421 KT3121
Tmax T3 4 300 KT3401(*) KT3101(*) KL3104(*)
Tmax T4 3/4 200 KT4411 KT4111 KT4122
Tmax T4 3/4 300 KT4127
Tmax T4 4 200 KT4101
Tmax T5 (400A) 3/4 300 KT5411 KT5111 KL5115 KT5120 KT5130
Tmax T5 4 300 KT5101 KL5101
Tmax T6 3/4 500 KT6111 KT6131
(**)
3/4 400 KT7110 KT7111 KL7112
Tmax T7-Emax X1
3/4 500 KT7560**
Tmax XT1 3(2)/4 200 KX1419 KX1611 KX1621
Tmax XT1 4 200 KX1401(*) KX1609(*) KX1801(*)
Tmax XT2 3(2)/4 200 KX2411 KX2611 KX2621
Tmax XT2 3(2)/4 300 KX2631
(*) (4) (*) (4)
Tmax XT2 4 200 KX2601 KX2801
Tmax XT2 4 300 KX2634(3)
(2)
Tmax XT3 3 /4 200 KX3411 KX3611 KX3811 KX3621
Tmax XT3 4 300 KX3601(*) KX3801(*)
Tmax XT4 3(2)/4 200 KX4411 KX4611 KX4622
Tmax XT4 3(2)/4 300 KX4627
Tmax XT4 4 300 KX4633(3)
(*) (4)
Tmax XT4 4 200 KX4601
(*)
Only front terminals,
(**)
Only rear terminals,
(1)
(2)
For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for platemounting - AD3307 XT3 3P Flange for plate-mounting - AD3308
(3)
Withdrawable + RC.mod. underneath.
(3)
Also for plug-in.

frames D≥225mm
Fixed Fixed + RCD mod. underneath Plug-in Withdrawable

Front or rear No. Dimensions 12 DIN mod. 24 DIN mod. 36 DIN mod. 12 mod. DIN 24 mod. DIN 36 mod. DIN 12 mod. DIN 24 mod. DIN 24 mod. DIN
CB terminals poles H (mm) W=390mm W=600mm W=800mm W=390mm W=600mm W=800mm W=390mm W=600mm W=600mm
Tmax T1-T2-T3-XT1-XT3 on DIN 35 rail 200 (see page 5/16)
5
Tmax T3 3/4 300 KT3416 KT3211 KL3212
Tmax T3 3/4 400 KT3426 KT3221
Tmax T4 3/4 400 KT4412 KT4211 KT4221 KT4231
Tmax T4 side by side 3/4 400 KT4116(3) KL4118(1)
Tmax T4 4 500 KT4103
Tmax T5 (630A) 3/4 400 KT5412 KT5211 KL5213
Tmax T5 3/4 500 KT5221 KT5231
Tmax T5 4 500 KT5401 KT5103 KL5103
Tmax T6 3/4 500 KT6211 KL6214 KT6122
(2)
Tmax T6 side by side 3/4 500 KL6124
Tmax T7-EMAX X1 3/4 500 KT7211(4) KL7212(4) KT7231(4)
Tmax T8 3/4 900 KT8211
Tmax XT2 side by side(6) 3/4(7) 200 KX2612
Tmax XT3 3(5)/4 300 KX3412 KX3613 KX3812
Tmax XT4 3(5)/4 300 KX4412 KX4617
Tmax XT4 4 400 KX4603
Tmax XT4 side by side 3(5)/4 300 KX4616(2)
Tmax XT4 side by side 3(5)/4 300 KX4818(3)
(1)
Kit for No. 4 T4 circuit-breakers side by side,
(2)
Kit for No. 2 circuit-breakers side by side,
(3)
Kit for No. 3 circuit-breakers side by side,
(4)
Order No.2 blind panels H=100mm (PC....) for breakers with front terminals.
(5)
For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for platemounting - AD3307 XT3 3P Flange for plate-mounting - AD3308
(6)
(7)


frames D≥225mm
Installation of equipped apparatus horizontally
Tmax with direct rotary handle Tmax interlocked or interlocked
or motor operator motor operated
(*)
Fixed Plug-in Withdrawable

24 DIN mod. W=600mm 24 DIN mod. W=600mm 24 DIN mod. W=600mm
5
motor operated
motor operated
motor operated
Direct rotary
Direct rotary
Direct rotary
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
operator
operator
operator
Front or rear
handle
handle
handle
Motor
Motor
Motor
circuit-breaker No. Dimensions
terminals poles H (mm)
Tmax T1 3/4 200 KT1112 KT1111
Tmax T2 3/4 200 KT2112 KT2111
Tmax T3 3/4 200 KT3114 KT3119 KT3116 KT3121
(2)
Tmax T3 3/4 500 KT3131 KT3131 KT3131
Tmax T4 3/4 200 KT4111 KT4111
Tmax T4 3/4 300 KT4127 KT4125
Tmax T4 3/4 600(2) KI4114 KI4114 KI4114 KI4114 KI4115 KI4115
Tmax T5 (400A) 3/4 300 KT5111 KT5111 KT5130 KT5134
Tmax T5 (630A) 3/4 300 KT5111 KT5111 KT5131 KT5135
(2)
Tmax T5 3/4 600 KI5114 KI5114 KI5114 KI5114 KI5115 KI5115
Tmax T6 3/4 500 KT6112 KT6115 KT6131 KT6114
Tmax T6 3/4 800(2) KT6116 KT6117 KT6118 KT6119
Tmax T7**/Emax X1 3/4 400(1) KT7111 KT7111 KT7111 KT7111
Tmax XT1 3/4 200 KX1605 KX1607
Tmax XT1 3/4 500 KX1622 KX1608 KX1622 KX1608
Tmax XT2 3/4 200 KX2605 KX2607
Tmax XT2 3/4 300 KX2632
Tmax XT2 3/4 500 KX2622 KX2608 KX2622 KX2608
Tmax XT3 3/4 200 KX3605 KX3607
Tmax XT3 + XT1 3(3)/4 500 KX1131 KX1132 KX1131 KX1132
Tmax XT3 3(3)/4 500 KX3131 KX3132 KX3131 KX3132
Tmax XT4 3(3)/4 200 KX4606 KX4607
Tmax XT4 3/4 300 KX4632
Tmax XT4 3(3)/4 500 KX4141 KX4142 KX4141 KX4142
(*) Interlock plate to be ordered with the circuit-breakers.

(**) Kit for a single circuit-breaker.
(1)
Kit for width 800mm KL7112.
(2)
Use with rear connection.
(3)
For 3 poles breakers please order accessory flange Code: AD3305 XT1 3P Flange for plate-mounting - AD3306 XT2 3P Flange for plate-mounting - AD3307 XT3 3P Flange for platemounting - AD3308

frames D≥225mm
Installation of equipped apparatus vertically
Tmax with direct rotary handle
or motor operator

5
motor operated
motor operated
motor operated
Direct rotary
Direct rotary
Direct rotary
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
operator
operator
operator
Front or rear
handle
handle
handle
Motor
Motor
Motor
Tmax T4 3/4 400 KT4211 KT4211 KT4231 KT4126
Tmax T5 (400A) 3/4 400 KT5211 KT5211 KT5232 KT5138
Tmax T5 (630A) 3/4 400 KT5211 KT5211
Tmax T5 3/4 500 KT5231 KT5139
Tmax T6 3/4 500 KT6120 KT6121 KT6122 KT6123
(1) (1) (1)
Tmax T7** - Emax X1 3/4 500 KT7211 KT7211 KT7211 KT7231(2) KT7231(2) KT7231(2)
Tmax XT2/XT4 3/4 400 KX2412

(1)
(2)


frames D≥225mm
Installation of Emax/Emax 2 circuit-breakers
Fixed Withdrawable
No. Dimensions H 24 DIN mod. 36 DIN mod. 48 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.
Emax circuit-breakers poles (mm) W=600mm W=800mm W=1000mm W=600mm W=800mm W=1000mm
5 Vertical installation
Emax X1/T7 interlocked** 3/4 500 KT7211(1) KL7212(1) KT7231(1) KL7213(1)
Emax E1(1)-E2(1)-E3 3/4 600 KE3215 KE3235
Emax E3/E3 interlocked** 3/4 600 KE4215 KE4235
Emax E4/E4 interlocked** 3/4(2) 600 KE5215 KE5235
Emax E4 Full size 4 600 KE4000 KE5237
Emax E6 50% Neutral 3/4 600 KE6342 KE6341
Emax E1.2 3/4 500 KN1556(3) KN1758(3) KN1356 KN1558
Emax E2.2 3/4 600 KN2766(4) KN2566(5)
Emax E2.2/E4.2 3/4 600 KN4168(4) (6) KN4768(5) (6)
Emax E2.2/E4.2/E6.2 N.50% 3/4 600 KN6361 KN6166
Emax E1.2 3/4 400 KN1446(3) KN1448(3)
Emax E1.2 3/4 500 KN1156
The kit for installing Emax air circuit-breakers in the versions of switchgear indicated includes the pre-drilled front panel and the resting crosspieces. To install Emax E1…E3
circuit-breakers, always use 700mm depth (therefore also depth 900mm with kit SK..81), for Emax E4 use structures with 900mm depth or several structures placed side by
side at the rear. It is necessary to install one E6 or one E6.2 breaker per column (depth D=900 mm), at a maximum height of H=1100 mm; moreover, under the E6 breaker it is
not possible to install any other device.
(1)
This kit can also be used for motor operated, interlocked and interlocked motor operated version. (2) For the 4P version neutral 50%
(3)
The E1.2 fixed with frontal terminals can be installed in an enclosure with D=300mm; the E1.2 fixed with rear terminals can be mounted in enclosures with D=500mm.
(4)
Fixed/interlocked version. (5) Withdrawable/interlocked version. (6)For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or D=900mm with proper intermediate uprights SK1881/
SK2081) for 3200A and D=900mm for 4000A. (**) Kit for a single circuit-breaker.
Flat
plate Recessed
plate
Recessed
panel
Flat Flat
panel panel
Minimum distance between back plate and

H recessed A B C busbar holder
Structure plate (mm) (mm) (mm) (mm)
ArTu K D≤300mm 200 45÷220 75÷250 28
400 110÷220 140÷250 95
ArTu K D≥=500mm 200 45÷200 75÷200 28
400 110÷270 140÷300 95
600 250÷380 280÷410 240

frames D≥225mm
Kit per OT160÷1600
Dimensions
(mm) 5
Kit OT630/800 vertical KO3660 400 600 E03-04 Decentralized 175mm 166mm
Kit OT1000/1600A vertical KO1250(*) 600 600 E12-22 Central Handle “T” 400mm 166mm
Kit OT630/800 vertical KO3680 400 800 E03-04 Decentralized 175mm 166mm
(*) Central control with butterfly lever.
Apparatus of the OETL series up to 1600A (not motor operated) and OESA up to 800A (not motor operated) can be installed inside the floor-mounted ArTu K switchgear. Again
in this case, according to the dimensions of the apparatus, a plain back plate must be used (PF or FR…) and a panel (PC or PR…) of appropriate height and depth. The useful
space between panel and door is 50mm. For larger-sized handles, use plain recessed panels RR… (see dimensions in table).
Plain flat, plain recessed back plates
PF.... FR....
Back plates
Plain flat Plain recessed
12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. 24 DIN mod. 36 DIN mod.
H (mm) W=390mm W=600mm W=800mm W=1000mm W=600mm W=800mm
100
200 PF2401 PF2601 PF2801 PF2100 FR2600 FR2800
300 PF3403 PF3601 PF3801 PF3100
400 PF4401 PF4601 PF4801 PF4100 FR4600 FR4800
600 PF6401 PF6601 PF6801 PF6100 FR6600 FR6800


frames D≥225mm
Modular blind panels, recessed and ventilated
PC.... PR.... PA....
Panels
Plain flat Plain recessed Ventilated
5
12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. 12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.
H (mm) W=390mm W=600mm W=800mm W=1000mm W=390mm W=600mm W=800mm W=1000mm
100 PC1400 PC1600 PC1800 PC1210 PA1600 PA1010
200 PC2400 PC2600 PC2800 PC1220 PR2600 PR2800 PA2600 PA2010
300 PC3400 PC3600 PC3800 PC1230
400 PC4400 PC4600 PC4800 PC1240 PR4600 PR4800
500 PC1250
600 PC6400 PC6600 PC6800 PC1260 PR6600 PR6800
800 PC8600 PC8800
Blind panels
1600 PC1660 PC1680
1800 PC1840 PC1860 PC1880
2000 PC2040 PC2060 PC2080
Back plates
Pair of crosspieces included in codes
AD1049, AD1050, AD1051
PM....
PF....
SK....
PC....
max 290 (D=362mm)
565 (D=637mm)
765 (D=837mm)
965 (D=1037mm)
PF.... For assembly of the counter
doors (PC1860, PC1880,
PC2060, PC2080) or modular
panels order the SK1804 or
SK2004 functional frames.
H (mm) Galvanised sheet back plate Track for front insertion

24 DIN mod. 36 DIN mod.
W=600mm W=800mm D=362mm D=637mm D=837mm
1800 PF1806 PF1808
AD1049 AD1050 AD1051
2000 PF2006 PF2008

frames D≥225mm
EV1135 EV1136

72x72mm 96x96mm 72x72mm 96x96mm
24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. 5
H (mm) W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=1000mm W=600mm W=800mm W=1000mm
200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS2017 PS4960 PS4968 PS2019

Code Description

AD1055
AD1041
AD1041
AD1041
AD1054

Installation on DIN rail Structure Internal cable container External cable container
Horizontal AD1054
Horizontal angled 45° AD1041

P≥225mm
EV1110 EV1111 EV1112
EV1119
Supporti inclinati per morsettiere e barre di terra

Code Description
EV1111 Angled supports double row of terminals

SEGREGATED STRUCTURES - Kit for switchgear D≥500mm

Installation on DIN rail
AD1600
PF2405
PF2005
PF2805 GD4005 PM2424
GD7005 PM2624 AD1086
GD9005 PM2836
GD1001 PM2010
W=390mm W=600mm W=800mm W=1000mm

Panel Panel Panel Panel
DIN rail kit 1 DIN row DIN rail kit 1 DIN row DIN rail kit 1 DIN row DIN rail kit 1 DIN row
H (mm) 12 DIN mod. 12 DIN mod. 24 DIN mod. 24 DIN mod. 36 DIN mod. 36 DIN mod. 48 DIN mod. 48 DIN mod.
5 200 GD4005 PM2424 GD7005 PM2624 GD9005 PM2836 GD1001 PM2010
EV1135 EV1136

72x72mm 96x96mm 72x72mm 96x96mm
24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.
H (mm) W=600mm W=800mm W=600mm W=800mm W=600mm W=800mm W=1000mm W=600mm W=800mm W=1000mm
200 PS2720 PS2728 PS2960 PS2968 PS4720 PS4728 PS2017 PS4960 PS4968 PS2019
Code Description
Modular back plate
Back plates
Blind flat
12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.
H (mm) W=390mm W=600mm W=800mm W=1000mm
200 PF2405 PF2005 PF2805 PF2090
300 PF3405 PF3005 PF3805 PF3090
400 PF4405 PF4005 PF4805 PF4090
600 PF6405 PF6005 PF6805 PF6090
PF8005 PF8805
Can be used to mount all the apparatus.

Modular blind panel
PC.... PR.... PA....
Panels
Flat Recessed Ventilated
12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. 24 DIN mod. 36 DIN mod. 24 DIN mod.
H (mm) W=390mm W=600mm W=800mm W=1000mm W=600mm W=800mm W=600mm
5
100 PC1400 PC1600 PC1800 PC1210 PA1600
200 PC2400 PC2600 PC2800 PC1220 PR2600 PR2800 PA2600
300 PC3400 PC3600 PC3800 PC1230
400 PC4400 PC4600 PC4800 PC1240 PR4600 PR4800
500 PC1250
600 PC6400 PC6600 PC6800 PC1260 PR6600 PR6800
800 PC8600 PC8800
Flat
plate
Recessed
panel
Flat
panel
Minimum distance between back plate and busbar

holder.

SEGREGATED STRUCTURES - Kit for switchgear D≥500mmm

Fixed Fixed+RCD mod. undern. Plug-in Withdrawable

Front or rear
circuit-breaker No. Dimensions 12 DIN mod 24 DIN mod 24 DIN mod 12 DIN mod 24 DIN mod 12 DIN mod 24 DIN mod
5 terminals poles H (mm) W=390mmm W=600mm W=600mm W=390mm W=600mm W=390mm W=600mm
Tmax T1 3/4 200 KT1410 KT1110 KT1100 (1)
Tmax T2 3/4 200 KT2410 KT2110 KT2420 KT2120
Tmax T3 3/4 200 KT3410 KT3110 KT3420 KT3120
Tmax T4 3/4 200 KT4120 KT4124 KT4113
Tmax T4 3/4 300 KT4130
Tmax T5 (400A) 3/4 300 KT5122 KT5136 KT5420 KT5430
Tmax T5 (630A) 3/4 300 KT5122 KT5136 KT5421 KT5431
Tmax T6 3/4 500 KT6110 KT6130
3/4 400 KT7115
Tmax T7 - Emax X1
3/4 500 KT7561
Tmax XT1 3(2)/4 200 KY1411 KY1611 KY1621
Tmax XT1 4 200 KY1601
Tmax XT2 3(2)/4 200 KY2411 KY2611 KY2421 KY2621
Tmax XT2 3(2)/4 300 KY2631
Tmax XT2 4 200 KY2601
Tmax XT3 3(2)/4 200 KY3411 KY3611
Tmax XT3 4 300 KY3601
(2)
Tmax XT3 3 /4 300 KY3421 KY3621
Tmax XT4 3(2)/4 200 KY4411 KY4611 KY4621
Tmax XT4 4 200 KY4601
Tmax XT4 3(2)/4 300 KY4631
(1)
Version for Tmax with differential module underplaced RC 221/222 (only 4P).
(2)

Installation of apparatus vertically
Fixed Fixed+RCD mod. undern. Withdrawable

Front or rear
circuit-breaker No. Dimensions 12 DIN mod 24 DIN mod 36 DIN mod 12 DIN mod 24 DIN mod 12 DIN mod 24 DIN mod
terminals poles H (mm) W=390mm W=600mm W=800mm W=390mm W=600mm W=390mm W=600mm 5
Tmax T1-T2-T3-XT1-XT3 on DIN Rail 35 200 (see page 5/29)
Tmax T4 3/4 400 KT4129 KT4121 KT4222 KT4128
Tmax T5 (400A) 3/4 400 KT5137 KT5128 KT5129 KT5223
Tmax T5 (630A) 3/4 400 KT5137 KT5128 KT5125 KT5123 KT5126 KT5124
Tmax T6 3/4 500 KT6210 KT6230
Tmax T7 3/4 500 KT7215 KT7230
Tmax T8 3/4 900 KT8210
Tmax XT4 3(1)/4 300 KY4412 KY4612
(1)

SEGREGATED STRUCTURES - Kit for switchgear D≥500mmm

Installation of equipped apparatus horizontally
Tmax with direct rotary Tmax interlocked or interlocked
handle or motor operator motor operated
(*)

motor operated
motor operated
motor operated
5
Direct rotary
Direct rotary
Direct rotary
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
operator
operator
operator
Front or rear
handle
handle
handle
Motor
Motor
Motor
Tmax T1 3/4 200 KT1110(1)
Tmax T2 3/4 200 KT2210 KT2110(1)
Tmax T3 3/4 200 KT3115 KT3110(1) KT3124
Tmax T3 3/4 500 KT3132 KT3132
Tmax T4 3/4 200 KT4124 KT4310 KT4113
Tmax T4 3/4 300 KT4130 KT4320(2)
Tmax T5 (400A) 3/4 300 KT5136 KT5310 KT5420 KT5430 KT5320(2)
Tmax T5 (630A) 3/4 300 KT5136 KT5310 KT5421 KT5431 KT5321(2)
Tmax T6 3/4 500 KT6220 KT6221 KT6130 KT6134(2)
Tmax T6 3/4 800 KT6142 KT6143 KT6144 KT6145
(3)
Tmax T7* / Emax X1 3/4 400 KT7115 KT7115 KT7115 KT7115
Tmax XT1 3/4 200 KY1605 KY1607
Tmax XT2 3/4 200 KY2605 KY2607
Tmax XT3 3/4 200 KY3605 KY3607
Tmax XT3 + XT1 3(4)/4 500 KY1131
Tmax XT3 3(4)/4 500 KY3131
(4)
Tmax XT4 3 /4 500 KY4141
Tmax XT4 3/4 200 KY4607 KY4604

(1)
Kit for 390mm width for T1 KT1410, T2 KT2410, T3 KT3410.
(2)
Only Form 2 segregation.
(3)
Use with protruding door PV..63 - PV..83.
(4)

Installation of equipped apparatus vertically (Form 2 only)
Tmax with direct rotary
handle or motor operator

motor operated
motor operated
motor operated
5
Direct rotary
Direct rotary
Direct rotary
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
Interlocked
operator
operator
operator
Front or rear
handle
handle
handle
Motor
Motor
Motor
Tmax T6 3/4 500 KT6132 KT6133 KT6230 KT6141
Tmax T7**/Emax X1 3/4 500 KT7215 KT7215 KT7215 KT7230 KT7230 KT7230
Installation of Emax/Emax 2 circuit-breakers
Fixed Withdrawable
No. Dimensions 24 DIN mod. 36 DIN mod. 48 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.
Circuit-breaker poles H (mm) W=600mm W=800mm W=1000mm W=600mm W=800mm W=1000mm
Verical installation
Emax X1/X1 interlocked** 3/4 500 KT7215(1) KT7230(1)
Emax E1/E2 3/4 600 KE2215 KE2235
Emax E3 3/4 600 KE3205 KE3236
Emax E3/E3 interlocked** 3/4 600 KE4214 KE4234
Emax E4/E4 interlocked** 3/4(2) 600 KE5214 KE5234
Emax E4 Full size 4 600 KE4100 KE5236
Emax E6 50% Neutral 3/4 600 KE6340 KE6343
Emax E1.2 3/4 500 KN1456 KN1856
Emax E2.2 3/4 600 KN2066(3) KN2666(4)
Emax E4.2 3/4 600 KN4268(3) (5) KN4868(4) (5)
Emax E6.2 N.50% 3/4 600 KN6461 KN6061
Emax E1.2 3/4 400 KN1243
Emax E1.2 3/4 500 KN1656
The kit for installing Emax air circuit-breakers in the versions of switchgear indicated includes the pre-drilled front panel and the resting crosspieces. To install Emax E1…E3
circuit-breakers, always use with 700mm depth (therefore also depth 900mm with kit SK..81), for Emax E4 use structures with 900mm depth or several structures placed side
by side at the rear. It is necessary to install one E6 or E6.2 breaker per column (depth D=900 mm), at a maximum height of H=1100 mm; moreover, under the E6 breaker it is
not possible to install any other device.
To complete the 36 module structure, ask for the special back plates (PF.... see page 5/28).
(1)
This kit can also be used for the motor operated version. (2) This kit can also be used for the motor operated, interlocked and interlocked motor operated versions.
(3)
Fixed/interlocked version. (4) Withdrawable/interlocked version. (5)For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or D=900mm with proper intermediate uprights SK1881/
SK2081) for 3200A and D=900mm for 4000A. (**) Kit for a single circuit-breaker.

Form 2-3-4 segregations for structures D≥500mm

Segregations according to the IEC 60439-1 and IEC 61439 -1 -2 Standards
By form of segregation, the type of subdivision provided inside the switchgear is meant. Segregation by means of barriers or partitions
(metallic or insulating) can have the purpose of:
- Ensuring protection against direct contacts (at least IPXXB), in the case of accessing a part of the switchgear with the power turned
off, in relation to the rest of the switchgear left live.
- Reducing the probability of an internal arc striking and propagating.
- Preventing passage of solid bodies between different parts of the switchgear (at least IP2X degree of protection).
By partition, the separation element between two compartments is meant, whereas the barrier protects the operator against direct
contacts and the effects of an arc of the breaking apparatus in the normal access direction.
5 Simbol Form 1 Form 2 Form 3 Form 4

(no internal segregation) (segregation of the busbars from (separation of the busbars from (separation of the busbars from the
the functional units) the functional units + separation functional units + separation of the
of the functional units from each functional units from each other +
other) separation of the terminals from
each other)
Form 2a Form 3a Form 4a
Terminals not separated from the Terminals not separated from the Terminals in the same compartment
a b d busbars busbars as the associated functional unit
Form 2b Form 3b Form 4b

Terminals separated from the Terminals separated from the Terminals not in the same
busbars busbars compartment as the associated
functional unit
Caption
a Housing
b Internal segregation
c Functional units including the terminals for the associated external conductors
d Busbars, including the distribution busbars
Note
The segregations can be made in ArTu K 390 and 600mm wide switchgear in 500/700/900mm depths with closed functional frame and segregated kits. Form 2 is obtained automatically using the
segregated type kits.
To obtain the desired form of segregation, the segregations kits relative to the previous forms must be ordered (e.g. Form 4 = Form 2 kit + Form 3 kit + Form 4 kit).

Examples of segregation


Forms of segregation
+
Selection of segregation according to the height of the kit Form 2a Form 3a
Height kit 12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.
Installation (mm) W=390mm W=600mm W=800mm W=1000mm
Horizontal moulded-case 200 See kit on page 5/30 SH4000 SH6000 SH8000 SH1100
5 circuit-breaker
300 See kit on page 5/30 SH4000 SH6000 SH8000 SH1100
400 See kit on page 5/30 SH6000 SH8000 SH1100
500 Tma T7-Emax X1 withdr. See kit on page 5/30 Included in Form 2 kit SH8000 SH1100
600 SH6000 SH8000 SH1100

T4-T5 interlocked See kit on page 5/32
800 SH6000 SH8000 SH1100
Vertical moulded-case 400 See kit on page 5/31
circuit-breaker
500 Emax X1-Tmax T6, T7 fixed See kit on page 5/31
600 See kit on page 5/31
800 See kit on page 5/31
Vertical air circuit-breaker 500 Emax X1-Tmax T7 withdr. See kit on page 5/32 Included in Form 2 kit Included in Form 2 kit
600 Emax E1-E2-E3 fixed See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit
600 Emax E1-E2-E3 withdr. See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit
Emax E4 fixed See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit
600
Emax E4 withdr. See kit on page 5/33 Included in Form 2 kit Included in Form 2 kit
600 Emax E6 fixed See kit on page 5/33 Included in Form 2 kit
600 Emax E6 withdr. See kit on page 5/33 Included in Form 2 kit
Uprights for switchgear D=900mm Example of Form 2a Example of Form 3a

segregation segregation
900
SH4000
SH6000
SH8000
SH1100
SH4000
SH6000
SH8000
SK1881 SH1100
SK2081

+ +
Form 3b Form 4b
Horizontal circuit-breaker Vertical circuit-breaker Horizz. CB Vertical CB
12 DIN mod. 24 DIN mod.
W=390mm W=600mm 24 DIN mod. 24 DIN mod. 24 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. Structure 24mod.DIN 24mod.DIN
W=600mm W=600mm W=600mm W=600mm W=800mm W=1000mm D=500/700/ W=600mm W=600mm
D=500/700mm D=500/700 D=700mm D=900mm D=900mm D=500mm D=700mm D=900mm D=900mm D=900mm 900mm P=500mm P=700mm
FH3224 FH3220 FH1020 FH4220
5
FH3434 FH3430 FH1030 FH4430
FH3544 FH3540 FH1040 FH4540
FH3650 FH1050 FH4650
Included in
FH7580 FH7510
Form 3B kit
FH3764 (1) FH3760 FH1060 FH4760
(3) (3) Included in
FV4557 FV4557
Form 3B kit
FH3680 (2) 4 x FH4220
FV3456 FV3458 FV4456 FV4458
FV3556 FV3558 FV4556 FV4558
FV3668 FV4668
FV3788 FV4788
FH3960 FH3690
FH3960 FH3690
FH3961 FH3691
FH3965 FH3190
FH3966 FH3191
FH3190
FH3191
(1) (2)
Only for blind back plate H=600mm. - Only for Tmax T6 interlocked in fixed/plug-in/withdrawable/motor operated versions. - (3) For use with Tmax T4 - T5.
For Emax 2 kit, the segregations Form 2 are already included in the segregated kit; segregations Form 3 are available under special offer request and Form 4 are those of Emax.
Emax segregation Form 3b Example of Emax and Emax 2 segregation Form 4b
Rear segregation Rear segregation
Picture 1 Picture 2 Picture 1
SV2061 SV2080 Rear segregation
SV2081 SV2011
SV2010 200mm Structure height
Emax
1800mm 2000mm installed
FH3960-FH3961
FH3965-FH3966 200mm No.3 SV2064 No.3 SV2064
FH3690-FH3691 No.1
FH3190-FH3191 SV2064 400mm No.2 SV2061 No.3 SV2061
SV4081
SV4010
Picture 2
1600mm
Side segregation
Side segregation
SV4080 Emax
SV4011 1800mm 2000mm installed
600mm
No.1 SV4080 No.1 SV4080
No.1
No.1 SV2080 No.2 SV2080
600mm 800mm


Busbar segregation
The SH2030, SH4030, SH1030, SH8570, SH1090 ed SV2061,
SH4000
SV4061, SV3060, SV2064, SV2081, SV3080, SV4081, SV2010, SH6000
SV3010, SV4010 versions are reciprocally indispensable for SH8000
SH1100
assembly.
The SH4030, SH1030, SH8570, SH1090 model must also be
used in combination with shelves SH4000, SH6000, SH8000,
SH1100 to make complete horizontal segregations of the
busbar system.
+
5
12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.

Horizontal Busbars W=390mm W=600mm W=800mm W=1000mm
Universal horizontal shelf SH4000 (1) SH6000 (1) SH8000 (1) SH1100
Horizontal busbar segregation
Vertical busbar segregation ≤4000A H=200mm
Vertical busbar segregation >4000A H=300mm
Vertical busbar segregation H=400mm
Horizontal segregation for internal cable container W=200mm

Horizontal segregation for external cable container W=300mm
Horizontal segregation for structure used as busbar container W=390mm
Horizontal segregation for structure used as busbar container W=600mm
Side segregation
AD1042
SV1860-SV1880
SV1815-SV2265
SV2285-SV2015
Spacers for AD1042 segregations
Allow simultaneous assembly of the
vertical segregations and crosspieces
positioned between the functional frame
and rear upright (cannot be coupled
with the side panel).
Structure Structure Structure

Vertical Busbars D=500mm D=700mm D=900mm
Vertical segregation for structure H=1600mm - No. 4 pieces SV4080 SV4011
Vertical segregation for structure H=1800mm - No. 2 pieces SV1860 SV1880 SV1815
Vertical segregation for structure H=2000mm SV2265 SV2285 SV2015
Rear segregation for internal cable container
Segregation/front door for external cable container W=300mm
Vertical segregation modular for structure H=200mm SV2080 SV2011

SH4033
SV4061 SH4034
SV2061 SH4035
2xSH2030* 1xSH2030*
+
2xSH4030 1xSH4030 SV4064 SH4031
2xSH1030 1xSH1030
2xSH8570 1xSH8570
2xSH1090 1xSH1090
5
*2 pieces without vertical **1 piece with vertical
busbar system busbar system
12 DIN mod. 24 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod.
W=390mm W=600mm W=600mm WL=800mm W=1000mm 12 DIN mod. 24 DIN mod. 36 DIN mod. 48 DIN mod. Structure Structure
D=500/700 D=500/700 D=900 D=500/700 D=900 W=390mm W=600mm W=800mm W=1000mm D=500mm D=700mm
SH4030 SH2030 SH1030 SH8570 SH1090

SV4061 SV2061 SV2081 SV2010
SV3060 SV3080 SV3010
SV2064 SV4081 SV4010
SH4031 SH4031
SH4033 SH4033
SH4034 SH4034
SH4035 SH4035
Rear segregation Front segregation

Cable container External cable container
AD1024 PO1831
AD1025 PO2031
Structure Structure Structure Structure

H=1800mm H=2000mm H=1800mm H=2000mm
AD1024 AD1025
PO1831 PO2031

Distribution system
Modular dividers
Code AD1076 AD1080(1) AD1007 AD1081(2) AD1030 AD1031 AD1075 AD1006

In (A) 125 125 175 175 250 400 125 175
Icw (kA) 4.4 4.2 11 11 21 21 4.4 11
Version pole 1 1 1 1 1 1 3 3
5 max 35 35 70 70 120 185 35 70
2,5÷16 10 6 10 6 5 5 6 6
2,5÷25 2 2
No. DIN modules 2,5 1,5 2,5 2 3 3 4.5 4.5
Four-poles

In (A) 125 125 125 160 250 250
Icw (kA) 10 4.2 4.2 6.2 15 15
Ipk (kA) 24 25 25 20 30 30
1.5/6 4/neutral
1.5/10 2/phase 7 9 20x5mm) 20x5mm)
6/neutral
1.5/16 2
2.5/16 8
6/25 2 2 3
No. DIN modules 5,5 5 7 9 24 36
1500 Vdc
(1)
(2)

Flexible busbars up to 1250A
Section
(A) Code phase IP31 IP41 IP65 (mm) (mm2) (mm) (kg)
20x3
250 BF1602 1 395 323 250 60 2000 1,42
20x5
400 BF2502 1 498 460 400 100 2000 2,15
24x6
500 BF4002 1 660 620 500 144 2000 3
32x5
630 BF4012 1 758 702 630 160 2000 3,36
40x8 5
1000 BF6302 1 1203 1140 1000 320 2000 6,33
50x10
1250 BF8002 1 1515 1390 1250 500 2000 9,68
Flat drilled and threaded busbars for earthing connection

WxW Length AxB
EV1119 6 MA 20 20x5 2000
5 20 6MA
20
EV1120 6 MA 20 25x5 2000

5 20 6MA
25
5 25 6MA EV1121 6MA 25 50x5 2000

50
A EV1122 6MA 34x30

EV1123 8MA 34x30
B EV1124 6MA 40x50
EV1125 8MA 40x50

Distribution system

Section
In No. busbar/ Icw max WxW dimensions Lenght Weight
Cross-section (A) Code phase IP31 IP41 IP65 (kA) (mm) (mm2) (mm) (kg)
400 BA0400 1 630 520 400 35 20x20 200 1730 4
800 BA0800 1 970 830 800 35 20x20 283 1730 4,4
5 1250 BA1250 1 1400 1330 1250 75 20x60 603 1730 9,3
1600 BA1600 1 1820 1710 1600 75 20x60 703 1730 10
2000 BA2000 1 2350 2200 2000 100 25x60 1000 1730 14,8
3200 BA2000 2 3600 3400 3200 100 25x60 2000 1730 29,6

Selection and assembly of flat busbars with shaped section and busbar holders
(max X) not to be exceeded between two consecutive busbar holders according to the max. Icc.
1/4 X
1/4 X The distance between the first busbar holder

1
/4 of “X”.
5
Busbar No. busbars X max X max X max X max X max X max X max
Lineare
PB0803 1 4 550 5 425 - - - - - - - - - -
BA0400 400A PB1601 (1) 1 4 550 4 550 - - - - - - - - - -
(1)
PB1603 1 4 550 4 550 - - - - - - - - - -
PB0803 1 4 550 5 425 - - - - - - - - - -
BA0800 800A PB1601 (1) 1 4 550 4 550 - - - - - - - - - -
PB1603 (1) 1 4 550 4 550 - - - - - - - - - -
1250A PB1601 1 4 550 4 550 5 425 7 275 9 225 - - - -
BA1250
PB1603 1 4 550 4 550 6 350 9 225 - - - - - -
PB1601 1 4 550 4 550 5 425 7 275 9 225 - - - -
BA1600 1600A
PB1603 1 4 550 4 550 6 350 9 225 - - - - - -
2000A PB3201 1 4 550 4 550 5 425 6 350 7 275 7 275 9 225
BA2000
3200A PB3201 2 4 550 4 550 5 425 6 350 7 275 7 275 9 225
Scalare
PB0802 1 4 550 5 425 - - - - - - - - - -
BA0400 400A
PB1600 (1) 1 4 550 4 550 - - - - - - - - - -
PB0802 1 4 550 5 425 - - - - - - - - - -
BA0800 800A
PB1600 (1) 1 4 550 4 550 - - - - - - - - - -
BA1250 1250A PB1600 1 4 550 4 550 5 425 7 275 8 250 - - - -
BA1600 1600A PB1600 1 4 550 4 550 5 425 7 275 8 250 - - - -
(1)
Can be used with the special AD1066 adapter.

Distribution system
Busbars with shaped section

Side of structure or 4 Busbar at top
1 2 internal/external
Back of structure cable container 5 Busbar at each
or external cable height
container 3 Direct connection
with Unifix H
A
Selection and assembly of busbars and busbar holders

5 Busbar holder Busbars with shaped section Crosspieces for fixing to structure
Switchgear without Segregated Internal cable Additional cable
Type In≤40÷800A In=1250A In=1600A In=3200A Installation segregation switchgear container container
Scaled up to 800A BA0400 1 TV4001 (W=390mm) TV3000 (D=150mm) TV3201 (W=300mm)
PB0802 BA0800
TV3101 (D=225mm) TV3101 (D=225mm)
2 TV5101 (D=300mm) TV5101 (D=300mm)
Scaled up to 1600A BA0400 BA1250 BA1600 1 TV4000 (W=390mm) TV3201 (W=300mm)

PB1600 BA0800
with adap. TV8001 (D=700mm) TV8005 (D=700mm) TV8101 (D=700mm) TV6101 (D=500mm)
AD1066
2 TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV8101 (D=700mm)
TV1101 (D=900mm)
Linear up to 800A BA0400 TV4001 (W=390mm)
PB0803 BA0800
1 TV6202 (W=600mm)
TV8202 (W=800mm)
TV6203 (W=600mm)
3
TV8203 (W=800mm)
Linear up to 1600A BA0400 BA1250 BA1600 TV4000 (W=390mm) TV6201 (W=600mm)(1)
PB1601 BA0800
1 TV6201 (W=600mm) TV8201 (W=800mm)(1)
with adap.
AD1066 TV8201 (W=800mm)
TV8001 (D=700mm) TV8005 (D=700mm) TV6101 (D=500mm) TV6101 (D=500mm)
TV1101 (D=900mm) TV1101 (D=900mm)
4
TV4221 (W=390mm) TV4221 (W=390mm)
TV6221 (W=600mm) TV6221 (W=600mm)
5 TV8221 (W=800mm) TV8221 (W=800mm)
TV8011 (D=700mm) TV8011 (D=700mm)
TV1011 (D=900mm) TV1011 (D=900mm)
(1)
Only form 2

Side of structure or 4 Busbar at top
1 2 internal/external
Back of structure cable container 5 Busbar at each
or external cable height
container 3 Direct connection
with Unifix H
A
Busbar holder Busbars with shaped section Crosspieces for fixing to structure 5
Type In≤40÷800A In=1250A In=1600A In=3200A Installation segregation switchgear container container
Linear up to 1600A BA0400 BA1250 BA1600 TV4000 (W=390mm) TV4000 (W=390mm(1)
PB1603 BA0800
1 TV6201 (W=600mm) TV6201 (W=600mm(1)
with adap.
AD1066 TV8201 (W=800mm) TV8201 (W=800mm(1)
4
TV1211 (D=900mm) TV1211 (D=900mm)
TV4221 (W=390mm) TV4221 (W=390mm)
A TV6221 (W=600mm) TV6221 (W=600mm)
TV8221 (W=800mm) TV8221 (W=800mm)
5
TV6011 (D=500mm) TV6011 (D=500mm)
B TV8011 (D=700mm) TV8011 (D=700mm)
TV1011 (D=900mm) TV1011 (D=900mm
Linear up to 3200A BA2000 TV8001 (D=700mm) TV8005 (D=700mm) TV8101 (D=700mm) TV8101 (D=700mm)
PB3201 1/2 busbar 2
per phase
TV6221 (W=600mm) TV6221 (W=600mm)

A
TV8221 (W=800mm) TV8221 (W=800mm)
5
TV8011 (D=700mm) TV8011 (D=700mm)
B
TV1011 (D=900mm) TV1011 (D=900mm)
(1)
Only form 2

Distribution system

Cross-section (A) Code phase IP31 IP41 IP65 (kA) (mm) (mm) (kg)
400 BR4005 1 530 490 400 35 32x5 1750 2,1
630 BR6305 1 772 695 630 50 50x5 1750 3,4
800 BR8005 1 951 863 800 50 63x5 1750 4,4
5
1250 BR1250 1 1431 1347 1250 50 100x5 1750 7,25
1600 BR1600 1 1836 1710 1600 105 100x10 1750 14,5
2000 BR2000 1 2250 2110 2000 105 120x10 1750 18,7
BR1600 2 3056 2700 2500 105 100x10 1750 29

2500
3000 BR2000 2 3500 3200 3000 105 120x10 1750 37,4
3200 BR1600 3 4018 3600 3200 105 100x10 1750 43,5
4000 BR2000 3 4460 4250 4080 105 120x10 1750 56,1
5000 BR2500 3 5280 5000 NO 105 160x10 1750 75
6300 BR2010 3 6300 6000 NO 105 200x10 1750 93,5

Selection and assembly of flat busbars and busbar holders
(max X) not to be exceeded between two consecutive busbar holders according to the max. Icw.
1/4 X
1/4 X The distance between the first busbar holder

1
/4 of “X”.
5
No. of busbar holders according to the max. Icw
Busbar No. busbars/type X max X max X max X max X max
Busbar Capacity holder per phase 25 kA (mm) 35 kA (mm) 50 kA (mm) 75 kA (mm) 100 kA (mm)
BR4005 400A BP1250 1 7 300 9 225 - - - - - -
BR6305 630A BP1250 1 6 375 7 275 9 225 - - - -
BR8005 800A BP1250 1 5 425 7 300 9 225 - - - -
BR1250 1250A BP1250 1 4 500 6 375 8 250 - - - -
BR1600 1600A BP1600 1 3 1000 3 1000 4 600 6 375 9 225
BR2000 2000A BP1600 1 3 1000 3 1000 4 600 6 375 9 225
BR1600 2500A BP2500 2 x BR1600 3 1000 3 1000 3 900 5 400 9 225
BR2000 3000A BP2500 2 x BR2000 3 1000 3 1000 3 900 5 400 9 225
BR1600 3200A BP3200 3 x BR1600 3 1000 3 1000 3 800 5 400 9 225
BR2000 4000A BP3200 3 x BR2000 3 1000 3 1000 3 800 5 400 9 225
BR2500 5000A BP1621 3 x BR2500 3 1000 3 1000 3 800 5 400 9 225
BR2010 6300A BP1622 3 x BR2010 3 1000 3 1000 3 800 5 400 9 225
max X = maximum distance not to be exceeded between two consecutive busbar holders

Distribution system
Flat busbars for distribution up to 6300A

1 Back of structure
3 Busbar al top
2 Side of structure or 4 Busbar at

internal/external each height
cable container
Selection and assembly of busbars and busbar holders

5 Busbar holder Flat busbars Crosspieces for fixing to structure
Type In=400÷1250A In=1600÷6300A Installation segregation switchgear container container
Linear up to 1600A BR4005 TR7005 (W=600mm) TR7005 (W=600mm)
BP1250A BR6305 1
TR8000 (W=800mm) TR8000 (W=800mm)
BR8005
BR1250 TR6001 (D=500mm) TR6005 (D=500mm) TR6101 (D=500mm) TR6101 (D=500mm)
1 busbar 2 TR8001 (D=700mm) TR8005 (D=700mm) TR8101 (D=700mm) TR8101 (D=700mm)
per phase
TR6201 (D=500mm) TR6205 (D=500mm) TR6301 (D=500mm) TR6301 (D=500mm)
4 TR8201 (D=700mm) TR8205 (D=700mm) TR8301 (D=700mm) TR8301 (D=700mm)
TR1201 (D=900mm) TR1205 (D=900mm)
Linear up to BR1600 TR7005 (W=600mm) TR7005 (W=600mm)
1600A/2000A BR2000 1
TR8000 (W=800mm) TR8000 (W=800mm)
BP1600 1 busbar
per phase TR6001 (D=500mm) TR6005 (D=500mm) TR6101 (D=500mm) TR6101 (D=500mm)
TR1201 (D=900mm) TR1205 (D=900mm)
Linear up to BR1600 TR7005 (W=600mm) TR7005 (W=600mm)
2500A/3000A BR2000 1
TR8000 (W=800mm) TR8000 (W=800mm)
BP2500 2 busbars
per phase TR8001 (D=700mm) TR8005 (D=700mm) TR8101 (D=700mm) TR8101 (D=700mm)
2
TV8211 (D=700mm) TV8211 (D=700mm) TV8211(D=700mm) TV8211(D=700mm)
3
4
TR1201 (D=900mm) TR1205 (D=900mm)

1 Back of structure
3 Busbar al top
2 Side of structure or 4 Busbar at

internal/external each height
cable container
Selection of busbars holders and crosspieces

Busbars holders Shaped busbars Crosspieces for fixing to structure 5
Internal cable
Switchgear without Segregated container reduced Additional cable
Type In=400÷1250A In=1600÷6300A Installation segregation switchgear frames container
Linear up to 3200A BR1600 TR7005 (W=600mm) TR7005 (W=600mm)
BP3200 3 busbars 1
TR8000 (W=800mm) TR8000 (W=800mm)
per phase
2
TV8211 (D=700mm) TV8211 (D=700mm) TV8211(D=700mm) TV8211(D=700mm)
3
TV1211 (D=900mm TV1211 (D=900mm TV1211 (D=900mm TV1211 (D=900mm
4
TR1201 (D=900mm) TR1205 (D=900mm)
Linear up to 4000A BR2000 1 TR8000 (W=800mm) TR8000 (W=800mm)
BP3200 3 busbars
per phase 2 TV1001 (D=900mm) TV1005 (D=900mm) TV1101 (D=900mm) TV1101 (D=900mm)
BR2000 not drilled 4 TR1201 (D=900mm) TR1205 (D=900mm)
Linear up to 5000A BR2500 2 TV2630 (D=900mm) TV2631 (D=900mm) TV2632 (D=900mm) TV2632 (D=900mm)
BP1621 3 busbars
4 TV2634 (D=900mm) TV2635 (D=900mm)
BR2500 not drilled

Linear up to 6300A BR2010 2 TV2630 (D=900mm) TV2631 (D=900mm) TV2632 (D=900mm) TV2632 (D=900mm)
BP1622 3 busbars
4 TV2634 (D=900mm) TV2635 (D=900mm)
BR2010 not drilled

Distribution system
Unifix systems
Rated current (In) central power supply 400A 100A
Maximum peak current (Ipk) 52,5kA-400V
5 Conditioned short-circuit Tmax T1 36kA-400V

current (Icc)
Tmax T2 N, S (1) 50kA-400V
Tmax T3 50kA-400V
Tmax XT1 50kA-400V
Tmax XT3 50kA-400V
S200M 10kA-400V
S200P 25kA-400V
Width 24/600 12/400
(No. modules/mm) 36/800 24/600
36/800

Frame for Tmax T and Tmax XT 300x600mm (HxW) ED2183
series
300x800mm (HxW) ED2191
Crosspiece for direct connection to W=600mm TV6202(2)
TV6203
with PB0803
W=800mm TV8203
18 mod. ED3009
24 mod. ED3017
36 mod. ED3025
18 mod. ED2951
24 mod. ED2969
36 mod. ED2977
24 mod. GD6002
36 mod. GD8002
(1)
(2)
ArTu D=150mm.

Unifix systems
with shaped
section.
Direct power Power supply by 5

module ED2209.
N
N
L1 L1
T T
L2 L2
N
L3
L3 N

Terminal capacity
35mm2.

module.
T T
N N

Distribution system
Unifix systems
Circuit-breaker series Unifix H Unifix L
DS941 ED2654 L1/N 40A ED3272 L1/N 40A
ED2662 L2/N 40A ED3280 L2/N 40A
ED2670 L3/N 40A ED3298 L3/N 40A
S200 - DS200 (top power supply) (bottom power supply)
ED2549 L2 63A ED2590 L2 63A ED3041 L2 100A
ED2556 L3 63A ED2598 L3 63A ED3058 L3 100A
ED2564 N 63A ED2606 N 63A ED3066 N 100A
5 ED2557 L1 ≤32A
ED2558 L2 ≤32A
ED2559 L3 ≤32A
ED2560 N ≤32A
ED2551 L1 125A
ED2552 L2 125A
ED2553 L3 125A
ED2554 N 125A
ED2753 N 100A
MDRC - Various apparatus (top power supply) (low power supply)
ED2308 L2 ED2340 L2
ED2316 L3 ED2357 L3
ED2324 N ED2365 N

Ordering codes
SK40..
SK60.. STRUCTURES WITHOUT SEGREGATION/SEGREGATED
SK80..
Structure
Base-Top-Base strip
Preassembled structure complete with cable input flange, base strip angle pieces and front flanges – the lateral
ones must be ordered separately.
SK1600 Dimensions (mm)

Package/
SK1800
SK2000 Description D Code No. of pieces
Base-Top-Base strip 225 SK4040 1/1
SK40..
SK60.. Base-Top-Base strip 500 SK4060 1/1
SK80..
5
ZD....
Uprights
Dimensions (mm)
Package/
No. 4 uprights 1600 SK1600 1/4
Base strip lateral flanges

Dimensions (mm)
Package/
Description D Code No. of pieces
No.2 base strip lateral flanges 150 ZD1015 1/2

Ordering codes
SK6600
SK8800
STRUCTURES WITHOUT SEGREGATION/SEGREGATED
Structure
Base-Top-Base strip for corner switchgear
No. of
Description W W Code pieces
SK1815 Corner base-Top-Base strip 500 500 SK6600 1/1

SK2015
Corner base-Top-Base strip 700 700 SK8800 1/1
Corner base-Top-Base strip 900 900 SK1100 1/1
5
Uprights for corner switchgears
Dimensions (mm)
Package/
150mm
≤Tmax T6 fisso No. 4 corner uprights 1800 SK1815 1/4
No. 4 corner uprights 2000 SK2015 1/4
1600/1800/2000
Functional frames for switchgear without segregation (open frame)

Allow the circuit-breaker door kit to be mounted in the combinations shown in the table.
Dimensions (mm)
Package/
Reduced frame
No.2 functional frames 1600 SK1604 1/2
Standard frame
No.2 standard frame 1800 SK1803 1/2
≥225mm No.2 standard frame 2000 SK2003 1/2
To make structures with internal cable container (switchgear W=800mm) the functional frame is already included in the internal cable container kit (see
page 5/61).
Switchgear depth [mm]

Type of Horiz
frame busbars 150 225 300 500 700 900
1800/2000
Moulded- Fixed Reduced no ≤T6 ≤T6

Maximum circuit-breaker installable
case yes ≤T6 ≤T6 ≤T6 ≤T6

circuit-
breakers Standard no ≤T6 ≤T7
yes ≤T7 ≤T7 ≤T7
yes ≤T7 ≤T7 ≤T7
Withdrawable yes ≤T7 ≤T7 ≤T7
With accessor. yes ≤T7 ≤T7 ≤T7
Air circuit Fixed no X1
breakers yes X1 X1 X1
Fixed/withdr. yes ≤E3 ≤E4

≥500mm STRUCTURES WITHOUT SEGREGATION/SEGREGATED
Structure
Functional frames for segregated switchgear (closed frame)
Dimensions (mm)
Package/
1800/2000
No.2 segregated functional frames 1800 SK1802 1/2

No.2 segregated functional frames 2000 SK2002 1/2
To make structures with internal cable container (switchgear W=800mm), the functional frame is already included in the kit for internal cable container
(see page 5/61).
IP65 Side panels 5

Dimensions (mm)
Package/
H=1600mm
No.2 side panels IP65 150 LF1626 1/2
H=1800mm
H=2000mm
IP41 Ventilated side panels
Aeration
surface
Dimensions entry side (1) Package/
Description (mm) D (cm2) Code No. of pieces
H=1800mm
No.2 ventilated side panels IP41 500 75 LA1860 1/2
No2 ventilated side panels IP41 900 170 LA1810 1/2
H=2000mm
(1) Valid for 1 panel.

Ordering codes

390 600-800-1000 Structure
IP65 Front or rear blind doors IP65
12/24/36/48 mod. blind doors
Door made of 15/10 thick steel sheet fitted with polyurethane gasket complete with handle with key with double
tab. Reversible, can be hinged on the right or left.
Dimensions (mm)
Package/
12 DIN mod.
Blind door IP65 390 1800 PO1841 1/1
Blind door IP65 390 2000 PO2041 1/1
24 DIN mod.
PV1841-PO2041 PO1661-PO1861
5 PO2061-PO1681 Blind door IP65 600 1600 PO1661 1/1
PO1881-PO2081 Blind door IP65 600 1800 PO1861 1/1
PO1811-PO2011
Blind door IP65 600 2000 PO2061 1/1
36 DIN mod.
Blind door IP65 800 1600 PO1681 1/1
Blind door IP65 800 1800 PO1881 1/1
Blind door IP65 800 2000 PO2081 1/1
48 DIN mod.
Blind door IP65 1000 1800 PO1811 1/1
Blind door IP65 1000 2000 PO2011 1/1
600-800-1000
390 IP65 Front or rear glass doors
Glass doors 12/24/36 mod.
Door made of 15/10 thick steel sheet with 4 mm thick safety glass fitted with polyurethane gasket complete with
handle with key with double tab. Reversible, can be hinged on the right or left.
Dimensions (mm)
Package/
12 DIN mod.
Glass door IP65 390 1800 PV1841 1/1
Glass door IP65 390 2000 PV2041 1/1
24 DIN mod.
Glass door IP65 600 1600 PV1661 1/1
PV1841-PV2041 PV1661-PV1861
PV2061-PV1682 Glass door IP65 600 1800 PV1861 1/1
PV1882-PV2082 Glass door IP65 600 2000 PV2061 1/1
PV1811-PV2011
36 DIN mod.
Glass door IP65 800 1600 PV1682 1/1
800-1000 200
Glass door IP65 800 1800 PV1882 1/1
600-800 Glass door IP65 800 2000 PV2082 1/1
24 DIN mod. + internal cablr container (Only for structures W=800mm consisting of 24 mod. + internal
cable container).
Glass door IP65 + cale cont. 800 1600 PV1681 1/1
48 DIN mod.
Glass door IP65 1000 1800 PV1811 1/1
Glass door IP65 1000 2000 PV2011 1/1
36 DIN mod. + internal cablr container (Only for structures W=1000mm consisting of 48 mod. + internal
PV1681-PV1881 cable container).
PV2081-PV1812
PV2012 Glass door IP65 + cale cont. 1000 1800 PV1812 1/1

Structure
IP65 Blind side doors

H=1800mm
No.2 side doors IP65 225 LI1840 1/2
H=2000mm
No.2 side doors IP65 500 LI2060 1/2 5
IP65 Front extending glass doors

600-800
Dimensions (mm)
Package/
24 DIN mod.
82
External extending glass door IP65 600 1800 PV1863 1/1
36 DIN mod.

Ordering codes

Structure
IP65 Rear panels
Dimensions (mm)
Package/
12 DIN mod.
Rear panel IP65 390 1800 RF1840 1/1
Rear panel IP65 390 2000 RF2040 1/1
24 DIN mod.
Rear panel IP65 600 1600 RF1660 1/1
Rear panel IP65 600 1800 RF1860 1/1
5 Rear panel IP65 600 2000 RF2060 1/1
36 DIN mod.
Rear panel IP65 800 1600 RF1680 1/1
Rear panel IP65 800 1800 RF1880 1/1
Rear panel IP65 800 2000 RF2080 1/1
48 DIN mod.
Rear panel IP65 1000 1800 RF1810 1/1
Rear panel IP65 1000 2000 RF2010 1/1
Rear ventilatd panels IP41

Dimensions (mm)
Package/
24 DIN mod.
Ventilated rear panel 600 1800 RA1860 1/1
36 DIN mod.
48 DIN mod.

IP3040-IP3060
IP3080-IP3010
IP3030
Structure
IP 31 Finishing section
For IP31 version switchgear (without door), use the special finishing kits already sized for the standard heights and
widths of ArTu switchgear. In the case of switchgear placed side by side, use the special double IP31 kit on the joining
uprights.
Horizontal section
Dimensions (mm)
Package/
12 DIN mod.
No.2 IP31 horizontal finishing sections 390 IP3040 1/2
24 DIN mod. 5
36 DIN mod.
48 DIN mod.
External cable container W=300mm
Vertical section
Dimensions (mm)
Package/
No.2 IP31 vertical finishing sections 1600 IP3161 1/2
IP3163 Double vertical finishing profile IP31 for 1600 IP3163 1/2
IP3182 side-by-side switchgear
IP3161 IP3202
IP3180 Double vertical finishing profile IP31 for 1800 IP3182 1/2
IP3200 side-by-side switchgear
Double vertical finishing profile IP31 for 2000 IP3202 1/2
side-by-side switchgear

Ordering codes

Structure
Kit IP41
Not segregated structures
SH.... Dimensions (mm)
Package/
12 DIN mod.
No.4 IP41 horizontal kits for not 390 IP4140 1/4
segregated structures
24 DIN mod.
No.4 IP41 horizontal kits for not 600 IP4160 1/4
5 IP4140
IP4160
36 DIN mod.
IP4180 No.4 IP41 horizontal kits for not 800 IP4180 1/4
Segregated structures(1)
Dimensions (mm)
Package/
12 DIN mod.
No.4 IP41 horizontal kits for 390 IP4141 1/4
24 DIN mod.
36 DIN mod.
(1)
To complete with universal segregation SH 4000, SH 6000, SH 8000 (see page 5/86).

800
≤300
Structure
Internal cable container for switchgear without segregation (opern frame)
VC1624
VC1824 Only to be ordered for the 36 DIN mod. structures (W=800mm). Consisting of a pair of functional uprights and a
VC2024 blind door complete with two key locks. Can be mounted either on the right or left.
Dimensions (mm)
Package/
Reduced framed for structures P≤300mm
Not segregated internal cable
1600 200 VC1624 1/1
container
1800 200 VC1824 1/1
container
800
≥225
Not segregated internal cable 5
2000 200 VC2024 1/1
container
VC1823 Standard framed for structures P≤300mm
VC2023
SK1880 1800 200 VC1823 1/1
container
SK2080
2000 200 VC2023 1/1
container
Rear riser for unsegregated internal cable container

Kit consisting of 2 unsegregated functional frames and one blind door. The rear riser SK1880 (H=1800mm) and
SK2080 (H=2000mm) in the unsegregated structures must be ordered separately if needed for fixing onto the rear
of crosspieces, accessories, busbars, etc.
Dimensions (mm)
Package/
Internal cable container rear 1800 SK1880 1/1
riser
Internal cable container rear 2000 SK2080 1/1
riser
≥500
800 Internal cable container for segregated switchgear (closed frame)
Only to be ordered for the W=800mm structures. Kit consisting of 2 functional segregated frames, a blind door
VC1820
and a rear upright for fixing onto the back of crosspieces, accessories, busbars, etc. Can be mounted either on
VC2020 the right or left.
Dimensions (mm)
Package/
Internal cable container for segregated switchgear D≥500mm
Segregated cable container 1800 200 VC1820 1/1
Segregated cable container 2000 200 VC2020 1/1

Ordering codes
VC....
Structure
Base-Header-Plinth for external cable container
Pre-mounted structure complete with cable entry flanges, plinth channels and front flanges – the lateral ones must
SK1600 be ordered separately.
SK1800
SK2000 Dimensions (mm)
Package/
Description D W Code No. of pieces
Base, top and base strip for 150 300 VC3025 1/1
VC....
5 external cable container
Front and rear coverings for additional cable container

The additional cable container can be completed in the following ways:
PO..24 - IP65 version with external door (internal optional)
PO..31 - IP31 version with internal door and finishing section (see table on page 5/58).
IP31 Internal door

Dimensions (mm)
PO..23 Package/
PO..33 Description H W Code No. of pieces
RF.... Internal door for cable container 1600 300 PO1631 1/1
Internal door for cable container 1800 300 PO1831 1/1
Internal door for cable container 2000 300 PO2031 1/1
IP65 External door

Dimensions (mm)
Package/
External door for cable container 1600 300 PO1633 1/1
IP65 Rear panel

Dimensions (mm)
Package/
Rear panel for external cable 1600 300 RF1630 1/1
container
container
container

Reduced frames for switchboards
D=150 and for Tmax ≤ T6
Kit for apparatus
DIN rail kits for System Pro-M modular, Tmax T1- T2-T3, moulded-case circuit-
200
breakers and support for Unifix H

GD4002
GD6002 DIN rail kit
GD8002
300
150
GD1000
Dimensions (mm)
GD6008 Package/
GD6009 Description W Code No. of pieces
GD6011
200
GD6010 DIN rail kit (aluminium) GD4002 1/1

300
GD8010 390
DIN rail kit interaxis 150mm
GD6011 1/1
(2 DIN rows)
AD1061
24 DIN mod. - W=600mm 5
GD6008 1/1
(2 DIN rows) 600
Standard frames for switchboards

(excluding D=150mm) 36 DIN mod. - W=800mm
GD6009 1/1
(2 DIN rows) 800
(1)
The DIN rail Kit with accessories includes the 60x80 wiring duct and relative fixing supports AD1037.

Dimensions
(mm)
Package/
Fixing supports for Unifix H series
600/800 AD1061 1/1
for panel H=300mm

Ordering codes

Kit for apparatus
Modular panel
Steel sheet panels complete with hinges placed on the right or left
Dimensions (mm)
Package/
12 DIN mod.
390
24 DIN mod.
5 Modular panel 1 DIN row - Tmax RC 300 PM2312 1/1
Modular panel 1 DIN row only for
300 PM3624 1/1
Unifix H 600
300 PM3648 1/1
150mm
36 DIN mod.
Modular panel 1 DIN row - Tmax RC 300 PM2315 1/1
Modular panel 1 DIN row only for 800
300 PM3836 1/1
Unifix H
Pannello modulare 2 file DIN 300 PM3872 1/1
48 DIN mod.
Modular panel 1 DIN row 200 1000 PM2010 1/1
Width 600/800/1000mm Width 600mm

PM3648/PM3872 PM2624/PM2836/PM2010 PM6672
74,5 = 99,5
199
150 299 =
200
74,5 432/634/834
599
596/796/996
432/634
200
596/796
Version for Tmax with mod. diff. Version for Unifix H 99,5
PM2312/PM2315 PM3624/PM3836
432
99.5
= 596
299 299
199.5
=
432/634 432/634
596/796 596/796

Kit for apparatus
Steel sheet panels complete with hinges placed on the right or left.
Dimensions (mm)
Package/
200 600
36 DIN mod - W=800mm 5
200 800
48 DIN mod. - L=1000mm
200 1000
Leght 600/800/1000mm
PS4720/PS4728/PS4960/PS4968/ PS2720/PS2728/PS2960/PS2968
PS2017/PS2019 68 68
92 92
68 68
199
92 199 92
596/796/996 596/796

EV1135 Package/
AD1086 1/10
AD1600 AD1088 1/3
AD1800 grey RAL 7035 colour
AD1086 AD1089 1/3
INO AD1088 grey RAL 7035 colour
G AZZ
I MA AD1089
LU C No. 10 closing caps for instrument panel
EV1135 1/10
72x72mm
AD1101÷AD1104 No. 20 label-holders 24 DIN mod. AD1600 1/20

(1)

Ordering codes
05087 (60x80) STRUCTURES WITHOUT SEGREGATION/SEGREGATED

AD1009 Kit for apparatus
Ducts supports
05087(60x80)
Package/
OFF
OFF
OFF GD6002 Description Code No. of pieces

GD8002
No.4 plastic supports for horizontal duct AD1009 1/4
No.4 metal supports for horizontal duct AD1037 1/4
OFF
OFF
OFF
OFF
OFF
OFF
05087 (60x80) Depth adapters
OFF
OFF
OFF
OFF
OFF
GD6008 Enables the depth of miniature circuit-breakers to be adapted to that of moulded-case circuit-breakers mounted
OFF
GD6009
5 on the same DIN rail.
OFF
OFF
OFF
05085(40x80)
OFF
OFF
OFF
OFF
OFF
Dimensions
(mm)
OFF
OFF
OFF
Package/
OFF

600 AP6000 1/1
T1-T2-T3 floor-standing
05087(60x80)
AD1037
OFF
OFF
OFF
AP6000
GD6002
GD8002

Kit for apparatus
PC.... Blind, recessed and ventilated panels for general apparatus
Dimensions (mm)
Package/
PR....
PA....
Blind panel 390 400 PC4400 1/1
5
600
Ventilated panel 100 PA1600 1/1
800
1000

Ordering codes
STRUCTURES WITHOUT SEGREGATION - Kit for

switchgear with reduced frame
Kit for apparatus
Kit for installing Tmax circuit-breakers front terminals
KT.... Horizontal installation (front terminals)
KX....
KL.... Dimensions (mm)
Package/
Kit for T1 3/4 poles fixed 200 KT1117 1/1
Kit for T1 4 poles fixed + RC mod. 200 KT1102(1) 1/1
5 Kit for T2 4 poles fixed + RC mod. 200 KT2102 1/1
Kit for T5 4 poles fixed + RC mod. 300 600 KT5110 1/1
(2)
Kit for XT1 3/4 poles fixed 200 KX1617 1/1
Kit for XT1 4 poles fixed + RC mod. 200 KX1602 1/1
Kit for XT2 3/4 poles fixed 200 KX2619(2) 1/1
Kit for T3 3/4 poles fixed 200 KL3113 1/1
Kit for T5 3/4 poles fixed 300 800 KL5114 1/1
(2)
Kit for XT3 3/4 poles fixed 200 KL3613 1/1
(1)
(2)

Kit for apparatus
Kit for installing Tmax circuit-breakers
KT....
KX....
KL.... Dimensions (mm)
Package/
Kit for DIN T1-T2-T3-XT1-XT3, 3/4
200/600 GD…(1) 1/1
poles fixed + RC mod.
GD.... Kit for T4 3/4 poles fixed 400 KT4212 1/1 5
Kit for T5 3/4 poles fixed + RC mod. 500 KT5102 1/1
(4)
Kit for XT1 4 poles fixed + RC mod. 300 600 KX1603 1/1
Kit for XT1 No. 3 CBs side by side 200 KX1604(4) 1/1
Kit for XT2 No. 3/4(3) CBs side by
200 KX2604(2) 1/1
side
Kit for XT4 No. 3/4(3) CBs side by
300 KX4604(2) 1/1
side
Kit for DIN T1-T2-T3-XT1-XT3, 3/4
200/600 GD…(1) 1/1
poles fixed + RC mod.
Kit for T5 3/4 poles fixed 400 800 KL5212 1/1
Kit for T5 3/4 poles fixed + RC mod. 500 KL5102 1/1
(1)
(2)
(3)
(4)

Ordering codes
Orizzontale
Kit for apparatus
Kit for OT160÷400
Dimensions
(mm)
Package/
Kit for OT160/200/250/315/400 vertical
Verticale 300 600 Decentralized KO2260 1/1
installation
Kit for OT160/200/250/315/400 horizontal
installation
5 36 DIN mod. - W=800mm
Kit for OT160/200/250/315/400 vertical
installation
Kit for OT160/200/250/315/400 horizontal
installation
Blind back plates for general apparatus
Dimensions (mm)
Package/
PF.... 600
Blind recessed back plate 200 FR2601 1/1
FR.... Blind back plate 200 PF2810 1/1
800
The panels must be ordered separately.

switchgear with standard frame D≥225mm
KT....
KX.... Kit for apparatus
Horizontal installation (front or rear terminals)
Dimensions (mm)
Package/
5
Kit for T2 3/4 poles plug-in 200 KT2421 1/1
Kit for T3 4 poles fixed + RC mod. 300 KT3401(*) 1/1
390
Kit for T7 3/4 poles fixed 400 KT7110(**) 1/1
Kit for XT1 4 poles fixed + RC mod. 200 KX1401(*)(1) 1/1
(2)
Kit for T1 3/4 poles fixed (CM) 200 KT1111 1/1
Kit for T1 4 poles fixed + RC mod. 200 KT1101(*)(1) 1/1
Kit for T1 3/4 poles fixed (MRD) 200 KT1112 1/1
Kit for T2 4 poles fixed + RC mod. 200 KT2101(*) 1/1
Kit for T3 3/4 poles fixed (I-IM) 500 KT3131(**) 1/1
600
(*)
Kit for T3 3/4 poles plug-in (CM) 200 KT3121 1/1
Kit for T3 3/4 poles plug-in (MRD) 200 KT3116 1/1
Kit for T4 3/4 poles fixed (MRD-CM) 200 KT4111 1/1
Kit for T4 3/4 poles withdrawable (MRD) 300 KT4127 1/1
Kit for T4 3/4 poles withdrawable (CM) 300 KT4125 1/1
(*) Only front terminals; (**) Only rear terminals. CONTINUED
(1)
(2)
For 3 poles breakers please order accessory flange code AD3305 XT1 3P Flange for plate-mounting: AD3306 XT2 3P Flange for plate-mounting,
AD3307 XT3 3P Flange for plate-mounting, AD3308 XT4 3P Flange for plate-mounting.
(DRH) = Direct rotary handle; (MO) = Motor operator; (I) = Interlocked; (IM) = Interlocked motor operated.

Ordering codes

KT....
KX....
Kit for apparatus
Dimensions (mm)
Package/
KI....
Kit for T4 3/4 poles fixed/withdrawable (I-IM) 600 KI4114(**) 1/1
Kit for T4 3/4 poles plug-in (I-IM) 600 KI4115(**) 1/1
5 Kit for T5 4 poles fixed + RC mod. 300 KT5101 1/1
Kit for T5 (400A) 3/4 poles plug-in 300 KT5120 1/1
Kit for T5 (400A) 3/4 poles plug-in (MRD) 300 KT5130 1/1
Kit for T5 (630A) 3/4 poles plug-in (MRD) 300 KT5131 1/1
Kit for T5 (400A) 3/4 poles plug-in (CM) 300 KT5134 1/1
Kit for T5 (630A) 3/4 poles plug-in (CM) 300 KT5135 1/1
Kit for T5 3/4 poles fixed/withdrawable (I-IM) 600 KI5114(**) 1/1
Kit for T5 3/4 poles plug-in (I-IM) 600 KI5115(**) 1/1
Kit for T6 3/4 poles plug-in (CM) 500 KT6114 1/1
Kit for T6 3/4 poles fixed (I) 800 600 KT6116(**) 1/1
Kit for T6 3/4 poles fixed (IM) 800 KT6117(**) 1/1
(**)
Kit for T6 3/4 poles plug-in (I) 800 KT6118 1/1
Kit for T6 3/4 poles plug-in (IM) 800 KT6119(**) 1/1
Kit for T7 3/4 poles fixed 400
KT7111(3) 1/1
Kit for T7M 3/4 poles fixed (CM) 400
Kit for T7M 3/4 poles plug-in 500 KT7560 1/1
Kit for XT1 3/4 poles plug-in 200 KX1621(2) 1/1
Kit for XT1 3/4 poles fixed (MRD) 200 KX1605 1/1
Kit for XT1 3/4 poles fixed (CM) 200 KX1607 1/1
Kit for XT1 3/4 poles fixed/withdrawable (I) 500 KX1622 1/1
Kit for XT1 3/4 poles fixed/withdrawable (IM) 500 KX1608 1/1
(2)
(*) Only front terminals; (**) Only rear terminals. CONTINUED

(1)
Versione per Tmax modulo differenziale sottoposto RC 221/222.
(2)
(3)
If used with rotary handle, use the protruding door PV..63 and PV..83.

KT....
KX....
KL....
Kit for apparatus
Dimensions (mm)
Package/
Kit for XT2 4 poles fixed + RC mod. 300 KX2634(3) 1/1
Kit for XT2 3/4poles fixed/withdrawable (I) 500 KX2622 1/1 5
Kit for XT2 3/4poles fixed/withdrawable (CM) 500 KX2608 1/1
Kit for XT2 3/4 poli estraibile (MRD) 500 KX2632 1/1
Kit for XT3-XT1 3/4 poles fixed (I) 500 KX1131(2) 1/1
Kit for XT3 3/4 poles fixed (I) 500 KX3131(2) 1/1
(2)
Kit for XT3-XT1 3/4 poles fixed (IM) 500 KX1132 1/1
Kit for XT3 3/4 poles fixed (IM) 500 KX3132(2) 1/1
600
(2)
Kit for XT4 3/4 poli estraibile 300 KX4627 1/1
Kit for XT4 4 poles fixed + RC mod. 300 KX4633(4) 1/1
Kit for XT4 3/4 poles fixed (CM) 200 KX4607(2) 1/1
Kit for XT4 3/4 poles fixed (I) 500 KX4141(2) 1/1
Kit for XT4 3/4 poles fixed (IM) 500 KX4142(2) 1/1
Kit for XT4 3/4 poles fixed (MRD) 200 KX4606(2) 1/1
Kit for XT4 3/4 poli estraibile (MRD) 300 KX4632 1/1
Kit for T1 4 poles fixed + RC mod. 200 KL1102(*)(2) 1/1
Kit for T2 4 poles fixed + RC mod. 200 KL2104(*) 1/1
Kit for T3 4 poles fixed + RC mod. 300 KL3104(*) 1/1
Kit for T5 4 poles fixed + RC mod. 300 800 KL5101 1/1
(*) Only front terminals; (**) Only rear terminals.
(1)
(2)
(4)
withdrawable + differential module underplaced.

Ordering codes

GD.... Kit for apparatus
Vertical installation (front or rear terminals)
KT....
Dimensions (mm)
Package/
Kit DIN T1-T2-T3-XT1-XT3, 3/4 P fixed
200÷600 GD....(1) 1/1
+ RC mod.
5 Kit for T3 3/4 poles plug-in 400 KT3426 1/1
Kit for T4 3/4 poles fixed 400 390 KT4412 1/1
Tmax XT3 3/4 poles fixed 300 KX3412(2) 1/1
(2)
Tmax XT4 3/4 poles fixed 300 KX4412 1/1
Kit DIN T1-T2-T3-XT1-XT3, 3/4 P fixed
200÷600 GD....(1) 1/1
+ RC mod.
Kit for No.3 T4 3/4 poles fixed 400 KT4116 1/1
Kit for T4 4 poles fixed + RC mod.. 500 KT4103 1/1
Kit for T5 4 poles fixed + RC mod.. 500 KT5103 1/1
Kit for No.2 T5 3/4 poles fixed 400 600 KT5214 1/1
Kit for No.2 T5 3/4 poles fixed + RC
500 KT5117 1/1
mod..
Kit for T5 (400A) 3/4 poles withdrawable
400 KT5232 1/1
(MRD)
400 KT5138 1/1
(CM)
500 KT5139 1/1
(CM)
500 KT5231 1/1
(MRD)
(1)
CONTINUED
((2)

Kit for installing Tmax circuit-breakersx
KT....
KX.... Vertical installation (front or rear terminals)
KL....
Dimensions (mm)
Package/
Kit for T6 3/4 poles withdrawable 500 KT6122 1/1
5
Kit for T7 3/4 poles fixed
500 KT7211(5) 1/1
Kit for T7M 3/4 poles fixed (CM-I-IM)
Kit for T7 3/4 poles withdrawable
Kit for T7M 3/4 poles withdrawable 500 600 KT7231 1/1
(CM-I-IM)
Kit for XT4 No. 3/4(4) CBs side by side 200 KX2612(3) 1/1
Kit for XT2/XT4 3/4 poles fixed (I) 400 KX2412 1/1
Kit DIN T1-T2-T3-XT1-XT3, 3/4 poles
200÷600 GD....(1) 1/1
fixed + RC mod.
Kit for No.4 T4 3/4 poles fixed 400 KL4118 1/1
Kit for No.3 T5 3/4 poles fixed + RC
500 800 KL5117 1/1
mod.
Kit for T7 3/4 poles withdrawable 500 KL7213 1/1
(2)
(1)
(2)
(3)
(4)
(5)

Ordering codes

Kit for apparatus
Kit for installing Emax circuit-breakers X1, E1, E2, E3, E4, E6
Kit for X1 3/4 poles fixed 500 KT7211 1/1
Kit for X1 3/4 poles withdrawable 500 KT7231 1/1
600
Kit for E1-E2-E3 3/4 poles fixed 600 KE3215 (1) 1/1
Kit for E1-E2 -E3 3/4 poles withdrawable 600 KE3235 (1) 1/1
5 36 DIN mod. - W=800mm
Kit for X1 3/4 poles fixed 500 KL7212 1/1
Kit for X1 3/4 poles withdrawable 500 KL7213 1/1
Kit for E3 3/4 poles fixed 600 KE4215 (2) 1/1
800
Kit for E3 3/4 poles withdrawable 600 KE4235 (2) 1/1
Kit for E4 3/4 poles fixed (I) neutral 50% 600 KE5215 (2) 1/1
Kit for E4 3/4 poles withdrawable (I) neutral 50% 600 KE5235 (2) 1/1
Kit for E4 4 poles fixed 100% neutral 600 KE4000 1/1
Kit for E4 4 poles withdrawable 100% neutral 600 KE5237 1/1
1000
Kit for E6 3/4 poles fixed 50% neutral 600 KE6342 1/1
Kit for E6 3/4 poles withdrawable 50% neutral 600 KE6341 1/1
(I) = Interlocked
(1) (2)
Also for E1-E2 interlocked version. Also for interlocked version.
Kit for installing Emax 2 circuit-breakers

Dimensions
(mm) Package/
Kit for Emax E1.2 3/4 poles fixed 500 KN1556 (1) 1/1
Kit for Emax E1.2 3/4 poles withdrawable 500 KN1356 1/1
600
Kit for Emax E2.2 3/4 poles fixed (I) 600 KN2766 1/1
Kit for Emax E2.2 3/4 poles withdrawable (I) 600 KN2566 1/1
800
Kit for Emax E2.2/E4.2 3/4 poles fixed (I) 600 KN4168 (2) 1/1
Kit for Emax E2.2/E4.2 3/4 poles withdrawable (I) 600 KN4768 (2) 1/1
Kit for Emax E6.2 3/4 poles fixed 50% neutral 600 KN6361 (3) 1/1
1000
Kit for Emax E6.2 3/4 poles withdrawable 50% neutral 600 KN6161 (3) 1/1
600
Kit for Emax E1.2 3/4 poles fixed 400 600 KN1348 (1) 1/1
(I) = Interlocked
(1)
The E1.2 fixed with frontal terminals can be installed in an enclosure with D=300mm; the E1.2 fixed with rear terminals can be mounted in enclosures
(2)
with D=500mm For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or D=900mm with proper intermediate uprights SK1881/
SK2081) for 3200A and D=900mm for 4000A. (3) E6.2 (Fix. or Withdrawable, not with interlock, “half sized” with N=50%) can be installed in only
one enclosure with D=900mm, or in more structures coupled back to back (min. D=900). Only one E6.2 per column (D=900mm) can be installed, at a
maximum height of H=1100mm; below this breaker it is not possible to install any other device.

Horizontal STRUCTURES WITHOUT SEGREGATION - Kit for
Kit for apparatus
Kit for OT160÷1600
Dimensions
(mm) Package/
Kit for vertical
OT160/200/250/315/400
Kit for horizontal
Vertical 300 600 Decentralized KO2261 1/1
OT160/200/250/315/400
Kit for vertical OT630/800 400 600 Decentralized KO3660 1/1
Kit for vertical OT1000-1600A 600 600 Central KO1250 1/1 5
Kit for vertical
OT160/200/250/315/400
Kit for horizontal
OT160/200/250/315/400
Kit for vertical OT630/800 400 800 Decentralized KO3680 1/1

Dimensions (mm)
Package/
PF.... Blind back plate 200 PF2401 1/1
390
FR.... 24 DIN mod. - W=600mm
1000

Ordering codes

Kit for apparatus
Back plates
Dimensions (mm)
Package/
PF....
Galvanised sheet back plate 1800 PF1806 1/1
600
AD....
800
5 Galvanised sheet back plate 2000 PF2008 1/1
Tracks for back plate

Dimensions (mm)
Package/
Pair of tracks + crosspieces 225 AD1049 1/1

SEGREGATED STRUCTURES- Kit for switchgear with
segregated frame D≥500mm
DIN rail kit for System Pro-M modular, Tmax T1-T2-T3-XT1-XT3, moulded-case
PF....
circuit-breakers
DIN rail kit
Dimensions (mm)
Package/
DIN rail kit (aluminium) 600 GD7005 1/1 5

Dimensions (mm)
Package/
390
1000

Ordering codes

KT....
KY....
Kit for apparatus
Horizontal installation (rear terminals)
KI.... Description H W Code No. of pieces
5
Kit for XT1 3/4 poles fixed 200 KY1411(2) 1/1
Kit for XT2 3/4 poles plug-in 200 KY2421(2) 1/1
Kit for T3 3/4 poles fixed (I-IM) 500 KT3132 1/1
Kit for T4 3/4 poles fixed and plug-in (I-IM) 600 600 KI4116 1/1
Kit for T4 3/4 poles plug-in (I-IM) 600 KI4119 1/1
Kit for T4 3/4 poles withdrawable (CM) 300 KT4320* 1/1
Kit for T4 3/4 poles withdrawable (I) 600 KI4117 1/1
Kit for T4 3/4 poles withdrawable (IM) 600 KI4118 1/1
Kit for T5 3/4 poles fixed and plug-in (I-IM) 600 KI5116 1/1
Kit for T5 3/4 poles plug-in (I-IM) 600 KI5119 1/1
Kit for T5 (400A) 3/4 poles withdrawable (MRD) 300 KT5430 1/1
Kit for T5 (630A) 3/4 poles withdrawable (MRD) 300 KT5431 1/1
* Only segregation Form 2 CONTINUED
(1)
(2)

KT....
KY....
Kit for apparatus
KI.... Description H W Code No. of pieces
Kit for T5 (400A) 3/4 poles withdrawable (CM) 300 KT5320* 1/1
Kit for T5 (630A) 3/4 poles withdrawable (CM) 300 KT5321* 1/1
Kit for T5 3/4 poles withdrawable (I) 600 KI5117 1/1
Kit for T5 3/4 poles withdrawable (IM) 600 KI5118 1/1
5
Kit for T6 3/4 poles fixed (I) 800 KT6142 1/1
Kit for T6 3/4 poles fixed (IM) 800 KT6143 1/1
Kit for T6 3/4 poles withdrawable (CM) 500 KT6134* 1/1
Kit for T6 3/4 poles withdrawable (I) 800 KT6144 1/1
Kit for T6 3/4 poles withdrawable (IM) 800 KT6145 1/1
Kit for T7 3/4 poles fixed
400 KT7115(1) 1/1
Kit for T7M 3/4 poles fixed (CM)
Kit for T7M-X1 3/4 poles withdrawable 500 KT7561 1/1
Kit for XT1 poles fixed + RC mod. 200 KY1601 1/1
Kit for XT1 3/4 poles fixed (MRD) 200 KY1605 1/1
Kit for XT1 3/4 poles fixed (CM) 200 600 KY1607 1/1
Kit for XT2 3/4 poles withdrawable 300 KY2631(2) 1/1
Kit for XT2 3/4 poles fixed (CM) 200 KY2607 1/1
Kit for XT3 - XT1 3/4 poles fixed (I) 500 KY1131(2) 1/1
Kit for XT3 3/4 poles fixed (I) 500 KY3131(2) 1/1
Kit for XT4 3/4 poles withdrawable 300 KY4631(2) 1/1
Kit for XT4 3/4 poles fixed (I) 500 KY4141(2) 1/1
* Only segregation Form 2
(1)
(2)

Ordering codes

Kit for installation of Tmax circuit-breakers
Vertical installation (rear terminals)
KT....
KY....
200 GD....(1) 1/1
fixed+RC mod.
5 Kit for T5 (630A) 3/4 poles plug-in 400 KT5125 1/1
Kit for T5 (630A) 3/4 poles withdrawable 400 KT5126 1/1
Tmax XT4 3/4 poles fixed 300 KY4412(3) 1/1
200 GD....(1) 1/1
fixed+RC mod.
600
Kit for T6 3/4 poli estrabile (CM) 500 KT6141 1/1
Kit for T7 3/4 poles fixed (2)
500 KT7215 1/1
Kit for T7M 3/4 poles fixed (CM-I-IM)
Kit for T7 3/4 poles withdrawable
500 KT7230 1/1
Kit for T7M 3/4 poles withdrawable (CM-I-IM)
200 GD....(1) 1/1
fixed+RC mod. 800
(1)
(2)
(3)

Kit for apparatus
Kit for installation of Emax circuit-breakers X1, E1, E2, E3, E4, E6
Dimensions (mm)
Package/
Kit for X1 3/4 poles fixed 500 KT7215 1/1
Kit for X1 3/4 poles withdrawable 500 KT7230 1/1
Kit for E1-E2 3/4 poles fixed 600 KE2215 1/1
600
Kit for E1-E2 3/4 poles withdrawable 600 KE2235 1/1 5
Kit for E3 3/4 poles fixed 600 KE3205 1/1
Kit for E3 3/4 poles withdrawable 600 KE3236 1/1
Kit for E3 3/4 poles fixed 600 KE4214 1/1
Kit for E3 3/4 poles withdrawable 600 KE4234 1/1
Kit for E4 3/4 poles fixed (I) 50% neutral 600 KE5214 1/1
Kit for E4 3/4 poles withdrawable (I) 50%
600 KE5234 1/1
neutral
Kit for E6 3/4 poles fixed 50% neutral 600 KE6340 1/1
Kit for E6 3/4 poles withdrawable 50% neutral 600 KE6343 1/1
Kit for E4 4 poles fixed 100% neutral 600 KE4100 1/1
Kit for E4 4 poles withdrawable 100% neutral 600 KE5236 1/1
(I) = Interlocked.
Kit for installation of Emax 2 circuit-breakers

Kit for E1.2 3/4 poles fixed 500 KN1456(1) 1/1
Kit for E1.2 3/4 poles withdrawable 500 KN1856 1/1
600
Kit for E2.2 3/4 poles fixed (I) 600 KN2066 1/1
Kit for E2.2 3/4 poles withdrawable (I) 600 KN2666 1/1
Kit for E4.2 3/4 poles fixed (I) 600 KN4268(2) 1/1
800
Kit for E4.2 3/4 poles withdrawable (I) 600 KN4868(2) 1/1
Kit for E6.2 3/4 poles fixed 50% neutral 600 KN6461(3) 1/1
1000
Kit for E6.2 3/4 poles withdrawable 50% neutral 600 KN6061(3) 1/1
Kit for E1.2 3/4 poles fixed 400 KN1246 1/1
600
Kit for E1.2 3/4 poles withdrawable 500 KN1656 1/1
(1) (2)
The E1.2 fixed with rear needs enclosures with D=500mm For E4.2 (Fix./Interlocked or Withdrawable/Interlocked), use D=700mm (or
D=900mm with proper intermediate uprights SK1881/SK2081) for 3200A and D=900mm for 4000A. (3) E6.2 (Fix. or Withdrawable, not with
interlock, “half sized” with N=50%) can be installed in only one enclosure with D=900mm, or in more structures coupled back to back (min. D=900).
Only one E6.2 per column (D=900mm) can be installed, at a maximum height of H=1100mm; below this breaker it is not possible to install any other
device.

Ordering codes
900
Segregation
Intermediate upright for segregated structures D=900mm
SK1881
SK2081
Dimensions (mm)
Package/
No.2 lateral intermediate uprights 1800 SK1881 1/2
No.2 lateral intermediate uprights 2000 SK2081 1/2
Horizontal circuit-breakers segregation

Form 3
5 Dimensions (mm)
Package/
Segregation kit Form 3 200 500/700 FH3224 1/1
FV3...
FH.... Segregation kit Form 3 800 500/700 FH3680 1/1
Segregation kit Form 3 200 900 FH1020 1/1
500 700 FH7580 1/1
Segregation kit T7-X1 withdrawable (1)
500 900 FH7510 1/1
Form 4 (to add to Form 3 kits)
Package/
Kit segregation form 4 to combine to FH3224 or FH3220 FH4220 1/1
FH4... Kit segregation form 4 to combine to FH3544 or FH3540 FH4540 1/1
Kit segregation form 4 to combine to FH3650 FH4220 (2) 1/1
Kit segregation form 4 to combine to FH3760 FH4760 1/1
(2)
(1)
Only Form 3.
(2)
Order 4 pieces
To select the proper kit, please see page 5/36.

Segregation
FV4... Vertical circuit-breakers segregation
Form 3
Dimensions (mm)
Package/
Segregation kit Form 3 400 500 FV3456 1/1
5
Form 4 (to add to Form 3 kits)

Package/
Kit segregation form 4 to combine to FV3456 FV4456 1/1
Form 3 only
Dimensions (mm)
Package/
Description W D Code No. of pieces
FH39..
FH36.. 24 DIN mod. - W=600mm
FH31.. Segregation kit Emax X1-Tmax T7 600 700 FH3960 1/1
withdrawable
Segregation kit Emax E1-E2-E3 fixed 600 700 FH3960 1/1
Segregation kit Emax E1-E2-E3 withdra- 600 700 FH3961 1/1
wable
Segregation kit Emax E4 fixed 800 900 FH3965 1/1
Segregation kit Emax E4 withdrawable 800 900 FH3966 1/1
Segregation kit E1-E2-E3 fixed - T7M-X1 600 900 FH3690 1/1
withdrawable
Segregation kit E1-E2-E3 withdrawable 600 900 FH3691 1/1
Segregation kit E4/E6 fixed 600 900 FH3190 1/1
Segregation kit E4/E6 withdrawable 600 900 FH3191 1/1
To select the proper kit, please see page 5/36.

Ordering codes
SH4000
SH6000
SH8000
SH1100 segregated frame D≥500mm
Segregation
Universal shelf
Package/
Universal busbar segregation shelf SH4000 1/1
5
Busbar segregation Form 3

2xSH4030
2xSH2030 Horizontal busbar segregation down
2xSH1030
2xSH8570 Dimensions (mm)
2xSH1090 Package/
Horizontal busbar segregation (down) 390 500/700 SH4030 1/1
Horizontal busbar segregation (down) 500/700 SH2030 1/1
600
Horizontal busbar segregation (down) 900 SH1030 1/1
Horizontal busbar segregation (down) 800 500/700 SH8570 1/1
Horizontal busbar segregation (down) 1000 900 SH1090 1/1
Horizontal busbar segregation rear

Dimensions (mm)
Package/
SV.... Description H Code No. of pieces
Horizontal busbar segregation (rear) 200 SV4061 1/1

AD1042
Segregation
Busbar segregation Form 3
SV1860
SV1880 Vertical busbar segregation side
SV1815
SV2265 Dimensions (mm)
Package/
SV2285
SV2015 Description H D Code No. of pieces
Vertical busbar segregation (side) 500 SV1860 1/1
Vertical busbar segregation (side) 1800 700 SV1880 1/1
Vertical busbar segregation (side) 2000 700 SV2285 1/1
5
Vertical segregation Emax (side)

Dimensions (mm)
SV2064
Package/
SV2080
SV2011 Vertical segregation Emax (side) 200 700 SV2080 1/1
SV4080 Vertical segregation Emax (side) 400 700 SV4080 1/1
SV2411
Vertical segregation Emax (side) 200 900 SV2011 1/1
Vertical segregation Emax (side) 400 900 SV4011 1/1
Vertical segregation Emax (rear)

Dimensions (mm)
Package/
Vertical segregation Emax (rear) 400 600 SV2064 1/1
Busbar segregation in the cable container

SH4031 Dimensions (mm)
Package/
Horizontal busbar segregation in internal
200 500/700 SH4031 1/1
cable container
Horizontal busbar segregation in additio-
300 500/700 SH4033 1/1
SH4033 nal cable container
SH4034
SH4035 Horizontal busbar segregation in structure
400 500/700 SH4034 1/1
W=390 used as busbar container
Horizontal busbar segregation in structure
600 500/700 SH4035 1/1
W=390 used as busbar container
Internal cable container rear segregation

Dimensions (mm)
Package/
AD1024 Internal cable container rear segregation 1800 AD1024 1/1

AD1025
Internal cable container rear segregation 2000 AD1025 1/1
Accessories
Package/
No.4 spacers for lateral segregation AD1042 1/4

Ordering codes
BA0400 STRUCTURES WITHOUT SEGREGATION/SEGREGATED

Distribution system
BA0800
Distribution busbar with shaped section
BA1250 Dimensions
(mm)
Package/
Busbar In=400A 1730 BA0400 1/1
BA1600 Busbar In=800A 1730 BA0800 1/1
Busbar In=1250A 1730 BA1250 1/1
Busbar In=1600A 1730 BA1600 1/1
BA2000 Busbar In=2000A (1 busbar for phase)
1730 BA2000 1/1
In = 3200A (2 busbars for phase)
5
Busbar holder for shaped section

PB0802
Package/
Scaled
PB1600
Scaled busbar holder up to In=1600A - 75kA PB1600 1/1
PB0803 Linear
Linear busbar holder up to In=1600A - 75kA PB1601 1/1
PB1601 Linear busbar holder up to In=1600A - 65kA PB1603 1/1
Linear busbar holder up to In=3200A - 100kA
PB3201 1/1
(1-2 busbars per phase)
PB1603
PB3201
20
AD1056 Hammer seal screws for busbars with shaped section
Package/
27
AD1064
No.12 M8 hammer screws W=20mm for cable
AD1056 1/12
terminal
No.12 M8 screws-W=27mm for flat busbars up to
37 AD1064 1/12
AD1071 10mm, complete with screw-covering cap
No.12 M8 screws-W=37mm for flat busbars up to
AD1071 1/12
47 AD1072 No.12 M8 screws-W=47mm for flat busbars up to
AD1072 1/12

Distribution system
Resting bases with shaped section
AD1066
Package/
Adapters for busbars with shaped section

Package/
No.4 adapters for In=400/800A busbars with busbar
AD1066 1/4
AD1065 AD1067
holder (PB1600-PB1601-PB1603) 5

AD1069
Package/
AD1068 No.4 joints for 800A busbars with shaped section (with
AD1068 1/4
800/1250/1600A busbars)
No.4 joints for 1250/1600A busbars with shaped sec-
AD1069 1/4
tion (with 1250/1600/2000A
busbars) AD1063 1/4
No.4 joints for connecting busbars with shaped section
AD1078 1/4
(with rectangular pre-drilled
busbars pitch 25mm) AD1073 1/4
AD1063
No.4 joints complete with screws for connecting bu-
AD1077 1/4
sbars with shaped section up to
3200A (with busbars with shaped section up to 1600A)
No.4 joints complete with screws for connecting 3200A
busbars with shaped section
No.4 copper 400A branch joints
Selection of the connection joint and busbar holder compatibility

AD1078 Horizontal busbars
Bars with shaped section Flat busbars

PB3201 PB1601 PB1603 BP3200
Busbar holder
(3200A) (1600/1250A) (1600/1250A) (3200A)
2xAD1069 (1)
Vertical busbars
Bars with shaped section
PB3201
(3200A) 1xAD1073 (2)
PB1601
BA2000 AD1078 AD1069 AD1063
(1250/1600A)
PB1603
AD1069
(1250/1600A)
AD1073
PB1600
BA2000 AD1069
(1250/1600A)
PB1601
AD1078 AD1068
(≤800A)
PB1603
AD1068
(≤800A)
AD1077
Joints valid for “T” and “L” branches.
(1)
Only “L” branch
(2)
Only “T” branch

Ordering codes
Pic. 1 STRUCTURES WITHOUT SEGREGATION/SEGREGATED

Distribution system
Fixing crosspieces for busbars with shaped section
Pic. 1 - Busbars vertically on back of structure
Package/
No.2 crosspieces structure for PB0803/PB0802 TV4001 1/2
No.2 crosspieces structure for PB1600/PB1601/PB1603 TV4000 1/2
No.2 crosspieces structure for PB0803 TV6202 1/2
Pic. 2
5 36 DIN mod. - W=800mm
No.2 crosspieces structure for PB0803 TV8202 1/2
Pic. 2 - Busbars vertically on back of external/internal cable container
Package/
Internal cable container - W=200mm
No.2 crosspieces for PB0802/PB1600 TV3201 1/2
External cable container - W=300mm
No.2 crosspieces for PB0802 TV3000 1/2
Pic. 3
Pic. 3 - Vertical busbars on side of the internal/external cable container
Dimensions (mm)
Package/
No.2 crosspieces internal cable 225 TV3101 1/2

container PB0802 300 TV5101 1/2
No.2 Internal/external cable
container crosspieces for 500 TV6101 (1) 1/2
PB1600/PB1601/PB1603
No.2 Internal/external cable 700 TV8101 1/2
container crosspieces for
PB1600/PB1601/PB1603/PB3201 900 TV1101 1/2
(1)
With PB1600 only in the additional cable container.
Pic. 4 - Busbars vertically on side of structure

Pic. 4 Dimensions (mm)
Package/
Structure Segregation Description P Code No. of pieces
without segregation structure No.2 crosspieces for PB1603 -
500 TV6001 1/2
open frame
No.2 crosspieces for PB1603
500 TV6005 1/2
- closed frame
No.2 crosspieces for PB1600/
PB01601/PB1603/PB3201 - 700 TV8001 1/2
open frame
PB01601/PB1603/PB3201 - 700 TV8005 1/2
closed frame
PB01601/PB1603/PB3201 - 900 TV1001 1/2
open frame
TV6001-TV8001 TV6005-TV8005 PB01601/PB1603/PB3201 - 900 TV1005 1/2
TV1001 TV1005 closed frame

Fig. 5
Distribution system
Fixing crosspieces for busbars with shaped section
Pic. 5 - Horizontal busbars at the top under the roof or down to the bottom
Dimensions (mm)
Package/
No.2 crosspieces for PB1603 500 TV1261 1/2
No.2 crosspieces for PB1601/ 700 TV8211 1/2
PB1603/PB3201 900 TV1211 1/2
Fig. 6 Pic. 6 - Busbar horizontal at any height

5
Package/
Description Code (A) No. of pieces
No.2 crosspieces for PB1601/PB1603 TV4221(1) 1/2
No.2 crosspieces for PB1601/PB1603/PB3201 TV6221(1) 1/2
(A) 36 DIN mod. - W=800mm
No.2 crosspieces for PB1601/PB1603/PB3201 TV8221(1) 1/2
(B)
Dimensions (mm)
Package/
Description D Code (B) No. of pieces
No.2 crosspieces for PB1603 500 TV6011 1/2
No.2 crosspieces for PB1601/ 700 TV8011 1/2
PB1603/PB3201 900 TV1011 1/2
(1)
With structures W=800mm with internal cable container, use a TV6221 crosspiece plus a TV8221 crosspiece as in Pic. 6a or two TV6221 crosspieces
with the intermediate upright SK1880 or SK2080, as in Pic. 6b.
Pic. 6.a Pic. 6.b
SK 1880
SK 2080
TV 8221 TV 6221
TV 6221 TV 6221
Fig. 7 Pic. 7 - Connection to the Unifix H system
Package/

Ordering codes
BR0250 STRUCTURES WITHOUT SEGREGATION/SEGREGATED

BR0400
Distribution system
BR0630
Flat busbars
BR4005 Dimensions (mm)
Package/
BR6305
No.2 busbars In=250A, section 15x5mm 1750 BR0250 1/2
BR8005
BR1250 No.2 busbars In=630A, section 50x5mm 1750 BR6305 1/2

5 No.2 busbars In=1250A, section
1750 BR1250 1/2
100x5mm
BR1600 No.2 busbars In=1600A, section
1750 BR1600 1/2
100x10mm
BR2000 No.2 busbars In=2000A, section
BR2500 1750 BR2000 1/2
120x10mm
BR2010
No.2 busbars In=5000A section
1750 BR2500 1/2
160x10mm
No.2 busbars In=6300A section
1750 BR2010 1/2
200x10mm
BP0630
Busbar holders
BP0632
Package/
BP0634
No.2 linear busbar holders In=630A - 32kA BP0630 1/2
No.2 terminal covers for linear busbar holders BP0630 BP0632 1/2
BP1250 No.2 scaled busbar holders In=630A - 23kA BP0634 1/2
No.2 busbar holders for busbars 5mm thick BP1250 1/2
No.2 busbar holders for busbars 10mm thick BP1600 1/2
BP1600
No.2 busbar holders for 2 busbars per phase 10mm thick BP2500 1/2
No.2 busbar holders for 3 busbars per phase 10mm thick BP3200 1/2
No.2 busbar holders for 3 busbars per phase 16mm BP1621 1/2
BP2500
No.2 busbar holders for 3 busbars per phase 20mm BP1622 1/2
BP3200
BP1621
BP1622 Busbar clamps
Kit for tightening the flexible busbars onto the rigid busbars, without the need to drill the flexible busbars.
Package/
2 pairs of busbar tightening plates for busbars
BS3250 1/4
H=40mm
BS5050 1/4
H=50mm
BS6350 1/4
H=63mm

Distribution system
Fixing crosspieces for flat busbars
Pic. 1 - Busbars vertically on back of structure
Package/
No.2 crosspieces for BP1250/BP1600/BP2500/
TR7005 1/2
BP3200
No.2 crosspieces for BP1250/BP1600/BP2500/
TR8000 1/2
BP3200
Pic. 2
Pic. 2 - Busbars vertically on side of internal/additional cable container
5
Dimensions (mm)
Package/
No.2 crosspieces on side of cable
500 TR6101 1/2
container
700 TR8101 1/2
container
900 TV1101 1/2
container
900 TV2632 1/2
container 6300A
Pic. 3
Pic. 3 - Busbar in horizontally on external cable container

Dimensions (mm)
Package/
No.2 Crosspieces for horizontal
500 TR6301 1/2
busbars in the cable container
No.2 Crosspieces for horizontal
700 TR8301 1/2
busbars in the cable container
Pic. 4
Pic. 4 - Busbars vertically on side of structure
Structure Segregation
without segregation structure Dimensions (mm)
Package/
No.2 crosspieces on side of
500 TR6001 1/2
structure-open frame
500 TR6005 1/2
structure-closed frame
700 TR8001 1/2
700 TR8005 1/2
900 TV1001 1/2
900 TV2630 1/2
structure-open frame 6300A
TV6001-TV8001 TV6005-TV8005 No.2 crosspieces on side of
TV1001 TV1005 900 TV1005 1/2
900 TV2631 1/2
structure-closed frame 6300A

Ordering codes
Fig. 4 STRUCTURES WITHOUT SEGREGATION/SEGREGATED

Distribution system
Fixing crosspieces for flat busbars
Pic. 5 - Busbars horizontally at top of structure
No. of
Description D Code pieces
500 TV1261 1/2
No.2 horizontal crosspieces 700 TV8211 1/2
900 TV1311 1/2
No.2 horizontal crosspieces
900 TV2633 1/2
6300A
5
Fig. 6 Pic. 6 - Busbars horizontally at any height in the structure
Dimensions (mm)
Package/
No.2 crosspieces for BP1250/
500 TR6201 1/2
BP1600 - open frame
500 TR6205 1/2
BP1600 - closed frame
BP1600/BP2500/BP3200 - 700 TR8201 1/2
open frame
BP1600/BP2500/BP3200 - 700 TR8205 1/2
closed frame
BP1600/BP2500/BP3200 - 900 TR1201 1/2
open frame
BP1600/BP2500/BP3200 - 900 TR1205 1/2
closed frame
No.2 crosspieces for BP1622
900 TV2634 1/2
open frame 6300A
No.2 crosspieces for BP1622
900 TV2635 1/2
closed frame 6300A
Flexible busbars
Flexible busbars insulated in self-extinguishing material.
Dimensions
(mm) Package/
No. of
Description W In (A) Code pieces
No.2 busbar section
2000 250 BF1602 1/2
20x3mm
No.2 busbar section
2000 400 BF2502 1/2
20x5mm
No.2 busbar section
2000 500 BF4002 1/2
24x6mm
No.2 busbar section
2000 630 BF4012(1) 1/2
32x5mm
No.2 busbar section
2000 1000 BF6302 1/2
40x8mm
No.2 busbar section
2000 1250 BF8002 1/2
50x10mm
(1)
Only for circuit-breakers with front extended terminals or rear terminals.

Distribution system
600
800 Unifix H
AD1061 Dimensions Package/

ED2183 Frames for Tmax
ED2191
No.2 fixing brackets onto structure for ED2183 o ED2091 AD1061 1/2
Feeder modules
ED2209 4P 400A feeder module (for ED2183-ED2191) ED2209 1/1
5
Basic module for DIN L1-L2 top 16A ED2902 1/1
ED2894
ED2902 Basic module for DIN L1-N bottom 16A ED2910 1/1
ED2928
ED2654
ED2564-ED2556
ED2720-ED2738
ED2551-ED2552 Basic modules In 100A
ED2553-ED2554
ED2845
ED2572-ED2590

Ordering codes

Distribution system
ED2217-ED2225
ED2258-ED2266
ED2332-ED2340
ED2373 1/1
RC221
ED0001
5 ED0002 Basic module false pole for solenoid operator ED2381 1/1
ED0003
ED2290-ED2308
ED2373 1/1
RC221

ED2381
ED2373 1/1
RC221
Accessories
ED2407
PM3624
Basic module false pole for DDA ED2845 1/1
PM3836 Basic module false pole for modular MDRC ED2852 1/1
No.2 IP20 covers (for ED2183-ED2191) W=173mm
ED2407 1/2
(10 DIN modules)
No.6 duct supports 40x60mm (only for modular
ED2936 1/6
apparatus)
ArTu M Kit for ED2183 and ED2191 PM3624 1/1
ED2936
Modular front panel 300x800mm (HxW)
No.10 terminal covers S200/F200 ED0004 1/10

600
Distribution system
800 Unifix L
ED2961
ED2962 Dimensions Package/
Description W (mm) Code No. of pieces
ED….
GD6002
2-poles busbars
PM2624
4-poles busbars
2 poli 4 poli
100A 4P 24 module busbar 600 ED2969 1/6 5
N L1 N L1 L2 L3
Connection with 4 conductors L1/L2/L3/N 16A
ED3124 1/6
single phase
ED3033 Connection with 3 conductors L1/L2/L3 40A ED3363 1/6
ED3041
ED3058
ED3104 No.10 connections N 100A ED3066 1/10
ED3101 Feeder with 4P 100A cable (W=350mm) ED3132 1/10
No.10 single-pole power supply terminals N ED3104 1/10
400 350
600 1500 Accessories
800 2500 No.10 busbar covers (W=600mm) ED2961 1/10
1500
DIN rail kit (W=400mm) GD4002 1/1
ED3090 ED3132 ED3124

ED3405 ED0026
ED3413 ED0025
ED3439

Ordering codes

Accessories
Structure side-by-side kit
The ArTu K switchgear can be placed side by side both laterally and at the rear. The IP65 side-by-side kit consists of
a set of supports and a gasket for keeping the degree of protection. In the IP31 version, in addition to the AD1014
kit, order the double finishing section (see page 5/59).
Package/
Kit for placing structures H=1600-1800-2000mm
AD1014 1/1
side by side laterally
5 Lifting eyebolts
SA1350 These allow cabled switchgear to be lifted. They are made of steel treated with white passivated galvanisation.
Package/
AA9610
No.4 steel M12 lifting eyebolts AA9610 1/4
These allow handling of several ArTu K switchgear placed side by side.
Package/
lifting reinforcements for side-by-side structures SA1350 1/2
Brackets for fixing to the wall

Allow fixing of ArTu K switchgears to the wall.
Package/
No.2 brackets for fixing to the wall AD1808 1/2

Accessories
Additional base strip H=100mm
Base strip for structure
Dimensions (mm)
Package/
No.4 base strip + No.4 flanges 225 ZD2440 1/8
5
Base strip for cable container external

Dimensions (mm)
Package/
Vano cavi esterno W=300mm
Base strip angle

To make a 200mm high base strip, order a H=100mm kit, which includes four additional angle pieces and four
additional flanges.
Dimensions (mm)
Package/
W=300mm
No.4 base strip angle pieces 100 AZ4000 1/4

Ordering codes

Accessories
Reinforced base strip H=100mm
Package/
Front and rear profile ZR4000 1/2
Additional cable container - W=300mm
5 Front and rear profile ZR3000 1/2
One-piece quake-proof base compartment

Base compartment in a single piece with reinforcing tubes installed at depth. Allows adjacent switchgear acces-
sorized with particularly heavy components to be lifted. Height 100 mm, length up to 6 meters. RAL7012 grey
colour with orange-peel finish. The number of reinforcing tubes depends on the length of the bank.
Package/
One-piece base compartment H=100 mm for adjacent
ZK1100 1/1
switchgear
- Must be designed in a special dedicated way for each configuration. Always attach the drawing of the front view
of the switchgear bank and specify the width, depth and switchgear sequence of each column.
- Unit of measurement for ordering: METER.
- Available in lengths of up to 6 m.

Accessories
AS0001 Kits for seismic hazard zones
Anti-quake tests performed
The tests provide a reference for comparison with dimensionally similar configurations and with regard to the load
distributed within them. They concern 3 columns measuring 2 x 2231x910x636 mm (including base compartment)
+ 1 x2231x720x636 mm (including base compartment). Total length=2540 mm with busbar system and internal
electrical components weighing about 1,500 kg (fig.1), and points for fixing to the floor with M12 bolts.
The switchgear was tested in accordance with standard IEC 60068-2-57 “Environmental testing Part. 2: Test
method. Vibration - Time history method” and standard IEE Std 693 “Recommended Practice for Seismic Design
of Substation”.
Similar fields of use*

5
Cabinet without specific accessories
According to Magnitude Intensity
ZK1100 According to standards Seismic Zone IEC according to according to
IEC 60068-2-57 - IEEE Std 693 68-3-3 Richter scale Mercalli scale
Resistance capacity up to 0.5 g Zone 4 7 9
Cabinet with specific accessories AS0001 + reinforced base compartment

According to Magnitude Intensity
According to standards Seismic Zone IEC according to according to
IEC 60068-2-57 - IEEE Std 693 68-3-3 Richter scale Mercalli scale
Resistance capacity up to 0.75 g Zone 4 7,5 10
* The references to the intensity scales are indicative.
Product codes for creating structures for seismic hazard zones

The product reaches 0.75 g resistance capacity with special base compartment ZK1100 and kit AS0001 com-
prising 12 reinforcing plates. Reinforced base compartment ZR… can be used as an alternative to the one-piece
base compartment.
Package/
No.12 (twelve) anti-quake reinforcing plates AS0001 1/12
Reinforced base compartment H=100 mm (see above) ZR.... 1/1
The segregation partitions replace the reinforcing kit.

Ordering codes

Accessories
Crosspieces for accessories
Can be mounted on the structure to anchor cables or to mount accessories. The crosspieces for accessories can
be mounted on the side, on the rear or in the cable container of the structure.
STRUCTURES WITHOUT SEGREGATION

Side crosspieces
Dimensions Mounting
(mm) position Package/
No. of
Description D Pic. Code pieces
No.2 side crosspieces 500 1 TR6001 1/2
5 Pic. 2
SEGREGATED STRUCTURES
Side crosspieces
Dimensions Mounting
No. of

Side crosspieces
Dimensions Mounting
No. of
Pic. 3 Description D Pic. Code pieces
No.2 side crosspieces 300 2 TV5101 1/2

Rear crosspieces
Dimensions Mounting
No. of
Description W Pic. Code pieces
No.2 rear crosspieces 600 3 TR7005 1/2
No.2 rear crosspieces 800 3 TR8000 1/2

Reinforcement crosspieces
Recommended for installation of fuse bases or transformers.
Dimensions Mounting
No. of
No.2 reinforcement crosspieces 225 4 TR8400 1/2

Accessories
Roof ventilation
Allows the roof of the cabinet to be raised thereby increasing ventilation and therefore the power which can be dissi-
pated. The degree of protection is IP20. The ventilation kit must not be mounted if the cabinet has to be lifted using
the eyebolts. In this case, the kit must be mounted when installation has been completed.
15mm Package/
No.4 Roof ventilation kit AD1015 1/4
Diagram pocket holder

The diagram pocket holder (made of RAL 2004 colour plastic, dim. HxL 237x265mm type A4) is applied to the
inside of doors/blind panels of suitable size using the adhesive provided. 5
Package/
Plastic diagram pocket holder AA5600 1/1

Package/
Structure
AD1041
No. 2 supports for horizontal 45° angled terminal box
AD1041 1/2
for ArTu K
No. 2 supports for horizontal terminal box for ArTu K AD1054 1/2
No. 4 supports for vertical terminal box in internal/
AD1055 1/4
additional ArTu K cable container
AD1055
Angled supports for terminal boxes and earthing busbars
AD1054 Package/
No.50 angled supports 1 row of terminals EV1110 1/50
EV1110 No.10 angled supports 1 row of terminals EV2110 1/10
EV2110
No.10 angled supports double row of terminals EV1111 1/10
EV2113
EV1119
EV1111 Insulators and copper busbars for neutral/earthing

Package/
No.2 busbars 20x5 mm drilled and threaded M6* EV1119 1/50
* Length 2000mm

Ordering codes
TS4013 STRUCTURES WITHOUT SEGREGATION/SEGREGATED

Accessories
TS4011
Sections for accessories
TS4012 Dimensions (mm) Package/
TS4000 No.2 sections EN50024 C30 2000 TS4011 1/2
TS4001
TS4002 No.2 sections EN50035 G32 2000 TS4012 1/2
TS4003
No.2 DIN sections EN50022 2000 TS4013 1/2
5
Dividers
Package/
Single-pole
AD1080 AD1081 AD1030 Modular 125A AD1076 (1) 1/1
AD1031
Modular 125A AD1080 (2) 1/1
Modular 175A AD1007 (1) 1/1
(2)
AD1075 AD1004
AD1006 Three-pole
Four-pole
Modular 125A-medium-93x89x48 (HxLxP) AD1028 1/1
AD1028 AD1027 Modular 125A-large-96x126x48 (HxLxP) AD1029 1/1
AD1029
AD1035 Horizontal 250A for structures W=600mm AD1034 1/1
(1)
AD1034
AD1053
Mounting accessories
Package/
AD1035 1/1
AD1053

Accessories
N Marking
Package/
3 No.490 adhesive labels ø12mm symbol N EV1150 1/490
400 VOLT No.490 adhesive labels ø12mm symbol T EV1154 1/490
No.10 triangular adhesive labels 125mm with 400V
EV1155 1/10
No.300 triangular adhesive labels 20mm with
5
EV1156 1/300
EV1090
EV1092
Package/
EV1050
EV1051
Package/
EV1058
No.10 aluminium supporting sections 30x15 –
EV1050 1/10
W=2000mm
EV1050
No.25 fixing brackets for EV1050 EV1051 1/25

Ordering codes

Accessories
Inserts and keys
Package/
Cable container
Box+ Yale insert (without tab) EV1008 1/1
Insert + Yale key for EV1008 EV1036 1/1
Ronis 455 insert + key for EV1008 EV1037 1/1
EV1008 AA6140
Structures
5 Double-tab Zn+Al+Mg alloy key AD1058 1/1
AA1560
Fiat key AA1570 1/1

Accessories
Spare parts
Package/
No.10 hinges + screws for panels (spare part ACP468) AD1090 1/10
No.10 plug + door key kits (spare part APT002) AD1091 1/10
No.5 FP fixing accessories H=1800/2000mm (spare
AD1092 1/5
part A210)
No.2 DIN rail fixing brackets for open frame (switchgear
AD1047 1/2 5
without segregation)
No.2 DIN rail fixing brackets for closed frame (segrega-
AD1048 1/2
ted switchgear)
ArTu Survival Kit” - Accessories and small items for
AD1057 1/1
spare parts
No.10 ArTu handle covers AD1070 1/10
No.4 base strip angle pieces H=100mm AZ4000 1/4
Internal finishing tape for IP31 Ral 7035 colour AD1001 1/1
No.20 cage nuts AD1036 1/20
No.50 three-lobed M6 spare screws AD1033 1/50
VB7035 1/1
spray can)

ArTu
T T T
T T T
T T T
T T T
T T T
Terminal boxes
ArTu K Series dim. 1600x500x150 (1831x748x287) mm (external hxwxd) IP65 with modular panels
5
AD1808 No.2 wall fixing brackets, K 1
GD6002 DIN rail Kit without segreg.24 mod. w=600mm, K 6
LF1626 No.2 side panels 1600x250mm (hxd) K 1
PM6672 Panel 72 mod. 600x600mm (hxw) M, K 2
PV1661 Glass door 1600x600mm (hxw) K 1
RF1660 Rear panel 1600x600mm (hxw) K 1
SK1600 No.4 ArTu K uprights h=1600mm 1
SK1604 No.2 reduced funct. frames h=1600mm K d=250mm 1
SK6025 ArTu K Base/Top/Base strip 600x250mm (wxd) 1
ArTu
T T T
T T T
T T T
T T T
T T T
Terminal boxes
ArTu K Series dim. 1600x800x150 (1831x948x287) mm (external hxwxd) IP65 with modular panels
VC1624 Int. reduced cable cont.1600x250mm (hxd) K 1

ArTu ArTu ArTu
SACE
Additional panel Additional panel
ArTu K Series dim. 1600x800x150 (1831x948x287) mm (external hxwxd) IP65 with plate for Tmax T5 and
modular panels
5
KL5114 Hor. fixed T5 Kit 300x800mm(hxw) M,K 1
PV1682 Glass door 36 mod. 1600x800mm (hxw) K 1

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
modular panels, complete with 400A busbars vertically on back of structure - Icw max 35kA
5
GD6002 DIN rail Kit without segreg. 24 mod. w=600mm, K 5
KT5112 Hor. fixed T5 Kit 300x600mm(hxw) M,K 1
TV6202 No.2 rear of struct. crosspieces w=600xPB0803 3

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
ArTu K Series dim. 1800x800x150 (2031x948x287) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and
modular panels, complete with 800A busbars vertically on back of internal cable cont. - Icw max 35kA
5
AD1808 Rear panel 1800x800mm (hxw) K 1 AD1808 Rear panel 1800x800mm (hxw) K 1
GD6002 DIN rail Kit without segreg. 24 mod. w=600mm, K 5 GD6002 DIN rail Kit without segreg. 24 mod. w=600mm, K 5
KT3112 T3 3/4P horiz. fixed without segreg. Kit M, K250 1 KX3612 XT3 3/4P horiz. fixed without segreg. Kit M, K250 1
LF1826 No.2 pann. later. 1800x150mm (hxp) K 1 LF1826 No.2 pann. later. 1800x150mm (hxp) K 1
PB0802 Scaled busbar holder In=800A (35 kA) 5 PB0802 Scaled busbar holder In=800A (35 kA) 5
PV1881 Glass door 1800x800mm (hxw) K 1 PV1881 Glass door 1800x800mm (hxw) K 1
RF1880 Rear panel 1800x800mm (hxw) K 1 RF1880 Rear panel 1800x800mm (hxw) K 1
SK1800 No.4 ArTu K uprights h=1800mm 1 SK1800 No.4 ArTu K uprights h=1800mm 1
SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1 SK8025 ArTu K Base/Top/Base strip 800x250mm (wxd) 1
TV3000 No.2 int. cable cont. cross. w=200mm x K d=250mm 3 TV3000 No.2 int. cable cont. cross. w=200mm x K d=250mm 3
VC1824 Int. reduced cable cont.1800x250mm (hxd) K 1 VC1824 Int. reduced cable cont.1800x250mm (hxd) K 1

ArTu
T T T T T
T T T T T
T T T T T
T T T T T
Terminal boxes
ArTu K Series dim. 1800x800x150 (2031x948x287) mm (external hxwxd) IP65 with plate for Tmax T3-XT3 and
modular panels, complete with 800A busbars vertically on back of internal cable cont. - Icw max 35kA
5
AD1808 Rear panel 1800x800mm (hxw) K 1 AD1808 Rear panel 1800x800mm (hxw) K 1
GD8002 DIN rail Kit without segreg.36 mod. w=800mm, K 5 GD8002 DIN rail Kit without segreg.36 mod. w=800mm, K 5
KL3113 T3 3/4P horiz. fixed without segreg. Kit w=800mm M, 1 KL3613 XT3 3/4P horiz. fixed without segreg. Kit w=800mm M, K250 1
LF1826 No.2 side panels 1800x250mm (hxd) K 1 LF1826 No.2 side panels 1800x250mm (hxd) K 1
PB0803 Linear busbar holder In=800A (35kA 5 PB0803 Linear busbar holder In=800A (35kA 5
PV1882 Glass door 36 mod. 1800x800mm (hxw) K 1 PV1882 Glass door 36 mod. 1800x800mm (hxw) K 1
SK1804 No.2 reduced funct. frames h=1800mm K d=250mm 1 SK1804 No.2 reduced funct. frames h=1800mm K d=250mm 1
TV8202 No.2 rear of struct. crosspieces w=800xPB0803 3 TV8202 No.2 rear of struct. crosspieces w=800xPB0803 3

ArTu
T T T
T T T
T T T
T T T
T T T
T T T
T T T
T T T
Terminal boxes
ArTu K Series dim. 2000x600x150 (2131x748x287) mm (external hxwxd) IP65 with plate for Tmax T5-630A and
5
GD6008 DIN rail Kit int. 150mm w=600mm M floor-mount. K 4
KT5112 Hor. fixed T5 Kit 300x600mm(hxw) M,K 1
TV6202 No.2 rear of struct. crosspieces w=600xPB0803 3

ArTu
T T T
T T T
T T T
T T T
T T T
Terminal boxes
ArTu K Series dim. 1800x600x350 (2031x748x225) mm (external hxwxd) IP65 with plate for Isomax S5 and
5
AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 3
KT5112 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 1
PB1601 Linear busbar holder In=1600A (75 kA) 3
SK1804 No.2 funct. frames h=1800mm open K 1
TV6201 No.2 structure crosspieces w=600mm 2

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
modular panels, complete with 800A busbars vertically on side of int. cable container - Icw max 35kA
5
KT5102 Kit T5 3/4P vertic. fisso+mod diff. non segreg. K 500x600mm (hxl) 1
PB0802 Scaled busbar holder In=800A (35 kA) 5
TV3101 No.2 int./ext. cable cont. crosspieces d=350mm 3
VC1824 Int. reduced cable cont.1800x200mm (hxw) K 1

ArTu
T T T T T
T T T T T
T T T T T
T T T T T
Terminal boxes
ArTu K Series dim. 1800x800x225 (2031x948x362)mm (external hxwxd) IP65 with plate for Tmax T5 and modular
panels
5
KL5102 Kit for T5 3/4 poles fixed + RC mod. not segregated K 500x600mm (hxw) 1
PC2800 Blind Panels 200x800mm (hxw) M, K 1
PM2836 36 mod. panels 200x800mm (hxwl) M, K 4
PS4968 Panels for 4 instruments 96x96 200x800mm (hwl)M, K 1
PV1882 Glass door 36 mod. 1800x800mm (hxw) K 1
SK1800 No.4 uprights ArTu K h=1800mm 1
SK1804 No.2 functional frames h=1800mm aperto K 1
SK8040 Base/Top/Base strip ArTu K 800x350mm (wxd) 1

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
ArTu K Series dim. 2000x600x300 (2231x748x437)mm (external hxwxd) IP65 with plate for Tmax T5, T2-XT2 and
modular panels
5
KT2117 Kit for T5 3/4 poles fixed + RC mod. not segregated K 1 KX2613 Kit for T5 3/4 poles fixed + RC mod. not segregated K 1
500x600mm (hxw) 500x600mm (hxw)
KT5102 Kit for T2 3/4 p. horiz. fixed 200x600mm (hxlw) 1 KT5102 Kit for XT2 3/4 p. horiz. fixed 200x600mm (hxlw) 1
PM2624 24 mod. Panel 200x600mm (hxw) M, K 2 PM2624 24 mod. Panel 200x600mm (hxw) M, K 2
RF2060 Rear panel. 2000x600mm (hxw) K 1 RF2060 Rear panel. 2000x600mm (hxw) K 1
SK2000 No.4 uprights ArTu K h=2000mm 1 SK2000 No.4 uprights ArTu K h=2000mm 1
SK2004 No.2 functional frames h=2000mm open K 1 SK2004 No.2 functional frames h=2000mm open K 1
SK6050 Base/Top/Base strip ArTu K 600x300mm (wxd) 1 SK6050 Base/Top/Base strip ArTu K 600x300mm (wxd) 1

ArTu
T T
T T
T T
T T
T T
ArTu K Series dim. 2000x390x225 (2231x538x362) mm (external hxwxd) IP65 with plate for Tmax T5, T2-XT2 and
5
AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 4 AD1066 No.4 busbar adapters In=800A with bus. hold. up to 1600A 4
GD4002 DIN rail Kit without segreg.12 mod. w=400mm, K 5 GD4002 DIN rail Kit without segreg.12 mod. w=400mm, K 5
KT2411 T2 3/4P horiz. fixed without segreg. Kit, K 1 KX2411 XT2 3/4P horiz. fixed without segreg. Kit, K 1
KT5412 T5 vert. fixed Kit 400x400mm (hxw) 1 KT5412 T5 vert. fixed Kit 400x400mm (hxw) 1
PB1601 Linear busbar holder In=1600A (75 kA) 4 PB1601 Linear busbar holder In=1600A (75 kA) 4
PC2400 Blind panel 200x400mm (hxw) K 2 PC2400 Blind panel 200x400mm (hxw) K 2
PM2424 Panel 12 mod. 200x400mm (hxw) K 5 PM2424 Panel 12 mod. 200x400mm (hxw) K 5
SK2003 No.2 funct. frames h=2000mm open K 1 SK2003 No.2 funct. frames h=2000mm open K 1
TV4000 No.2 rear crosspieces w=400mm, K 2 TV4000 No.2 rear crosspieces w=400mm, K 2

ArTu
T T T
T T T
T T T
T T T
Terminal boxes
ArTu K Series dim. 2000x800x300 (2231x948x437)mm (external hxwxd) IP65 with plate for Tmax T5, T2-XT2 and
5
AD1066 No.4 busbar adapters 400/800A 5 AD1066 No.4 busbar adapters 400/800A 5
KT2117 Kit for T2 3/4 p. horiz. fixed 200x600mm (hxlw) 1 KX2619 Kit for XT2 3/4 p. horiz. fixed 200x600mm (hxlw) 1
KT5102 Kit for T5 3/4 poles fixed + RC mod. not segregated K 1 KT5102 Kit for T5 3/4 poles fixed + RC mod. not segregated K 1
500x600mm (hxw) 500x600mm (hxw)
TV5101 No.2 int./ext. cable container crosspieces d=300mm 3 TV5101 No.2 int./ext. cable container crosspieces d=300mm 3
VC2024 Internal reduced cable container 2000x200mm (hxw) K 1 VC2024 Internal reduced cable container 2000x200mm (hxw) K 1

ArTu
ArTu K Series dim. 1800x600x500 (2031x748x637) mm (external hxwxd) IP41 with plate for Isomax S7, Tmax T5,
T2-XT2 and modular panels, complete with 1250A busbars vertically on back of structure - Icw max 50kA
5
AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 1 AD1066 No.4 busbar adapters In=800A with busbar holders up to 1600A 1
KT2111 S7 vert. fixed without segreg. Kit, K 1 KX2611 Kit XT2 vert. fixed without segreg. Kit, K 1
KT5111 T2 3/4P horiz. fixed without segreg. Kit, K 2 KT5111 T2 3/4P horiz. fixed without segreg. Kit, K 2
KT7231 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 1 KT7231 Hor. fixed T5 Kit+accessories 300x600mm (hxw) K 1
LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1 LA1860 No.2 ventilated side panels 1800x600mm (hxw) K 1
PS4960 4-instrument panel 96x96 200x600mm (hxw) M, K 1 PS4960 4-instrument panel 96x96 200x600mm (hxw) M, K 1
TV6001 No.2 axto frame struct. crosspieces d=600mm 2 TV6001 No.2 axto frame struct. crosspieces d=600mm 2

ArTu
ArTu K Series dim. 1800x390x500 (2031x538x637) mm (external hxwxd) IP41 with plate for Tmax T5, T3, T2,
XT3, XT2 and modular panels, complete with 1250A busbars vertically on side of structure - Icw max 50kA
5
KT2411 T2 3/4P horiz. fixed without segreg. Kit, K 3 KX2411 kit XT2 3/4P horiz. fixed without segreg. Kit, K 3
KT3419 T3 3/4P horiz. fixed without segreg. Kit, K 1 KX3419 Kit XT3 3/4P horiz. fixed without segreg. Kit, K 1
KT5411 T5 horiz. fixed Kit 300x400mm (hxw) K 2 KT5411 T5 horiz. fixed Kit 300x400mm (hxw) K 2
TV6001 No.2 axto frame struct. crosspieces d=600mm 2 TV6001 No.2 axto frame struct. crosspieces d=600mm 2

ArTu
ArTu K Series dim. 1800x800x500 (2031x948x637) mm (external hxwxd) IP41 with plate Tmax T7, T5, T2, XT2
and modular panels, complete with 1250A busbars vertically on side of internal cable riser - Icw max 35kA
5 Code Description Q.ty Code Description Q.ty
KT2111 T2 3/4P horiz. fixed without segreg. Kit, K 1 KX2611 XT2 3/4P horiz. fixed without segreg. Kit, K 1
KT7231 S7 vert. fixed without segreg. Kit, K 1 KT7231 S7 vert. fixed without segreg. Kit, K 1
PV1881 Blind panel 200x600mm (hxw) M, K 1 PV1881 Blind panel 200x600mm (hxw) M, K 1
RF1880 Glass door 1800x800mm (hxw) K 1 RF1880 Glass door 1800x800mm (hxw) K 1
TV6101 No.2 int./ext. cable cont. crosspieces d=600mm 2 TV6101 No.2 int./ext. cable cont. crosspieces d=600mm 2
VC1823 Internal cable cont.1800x200mm (hxw) K 1 VC1823 Internal cable cont.1800x200mm (hxw) K 1

ArTu
ArTu K Series dim. 2000x800x500 (2231x948x637)mm (external hxwxd) P41 with kit for Tmax T6, T5, T3, XT3
complete with 1600A busbars vertically on side on side of internal cable riser - Icw max 65kA
Code Description Q.ty Code Description Q.ty 5
KT3119 Kit for T3 3/4P horizontal fixed not segregated K 3 KX3611 Kit for XT3 3/4P horizontal fixed not segregated K 3
KT5111 Kit for T5 horizontal fixed +accessories 300x600mm (hxw) K 2 KT5111 Kit for T5 horizontal fixed +accessories 300x600mm (hxw) K 2
KT6211 Kit for T6 vertical fixed without segregation K 1 KT6211 Kit for T6 vertical fixed without segregation K 1
VC2023 Internal cable container. 2000x200mm (hxw) K 1 VC2023 Internal cable container. 2000x200mm (hxw) K 1

ArTu
Additional panel
Additional panel
Additional panel
ArTu K Series dim. 2000x800x500 (2231x948x637)mm (external hxwxd) IP65 with kit for Tmax T6, T3, T2, XT3,
XT2 complete with 1600A busbars vertically on side on side of internal cable riser - Icw max 65kA
5
KT2111 Kit forT2 3/4P horiz. fixed not segregated K 2 KX2611 Kit for XT2 3/4P horiz. fixed not segregated K 2
KT3119 Kit for T3 3/4P horiz. fixed not segregated K 2 KX3611 Kit for XT3 3/4P horiz. fixed not segregated K 2
KT6211 Kit for T6 vert. fixed not segregated K 1 KT6211 Kit for T6 vert. fixed not segregated K 1
VC2023 Internal cable container 2000x200mm (hxw) K 1 VC2023 Internal cable container 2000x200mm (hxw) K 1

ArTu
Terminal boxes
Terminal boxes
ArTu K Series Form 3/4 segregation dim.1800x600x700 (2031x748x837) mm (external hxwxd) IP31 with plate for
Tmax T5, T3, T2, XT3, XT2 complete with 1600A busbars vertically on side of structure - Icw max 50kA
5
IP3060 No.2 hor. finishing sections w=600mm K 1 IP3060 No.2 hor. finishing sections w=600mm K 1
IP3180 No.2 vert. finishing sections IP31 h=1800mm K 1 IP3180 No.2 vert. finishing sections IP31 h=1800mm K 1
KT2110 T2 3/4P hor. fixed segreg. Kit, K 2 KY2611 XT2 3/4P hor. fixed segreg. Kit, K 2
KT5136 T5 segr. hor. fixed Kit 300x600mm(hxw)K 1 KT5136 T5 segr. hor. fixed Kit 300x600mm(hxw)K 1
PF2005 Plain plate 200x600mm (hxw) segreg. K 2 PF2005 Plain plate 200x600mm (hxw) segreg. K 2
PS4960 4-instrument panel 96x96 200x600mm (hxw)M, K 1 PS4960 4-instrument panel 96x96 200x600mm (hxw)M, K 1
SH2030 Busbar hor. segregation w=600mm, K, PC 1 SH2030 Busbar hor. segregation w=600mm, K, PC 1
SH6000 Busbar hor. shelf w=600mm, K 2 SH6000 Busbar hor. shelf w=600mm, K 2
SK1802 No.2 funct. frames h=1800mm closed K 1 SK1802 No.2 funct. frames h=1800mm closed K 1
SV2061 Busbar vert. segregation 200x600mm (hxw) K 1 SV2061 Busbar vert. segregation 200x600mm (hxw) K 1
TV8005 No.2 funct. frame struct. crosspieces d=800mm 3 TV8005 No.2 funct. frame struct. crosspieces d=800mm 3
Segregation Form 3 Segregation Form 3
FH3540 F3 horiz. segreg. Kit 400x600mm (hxw) K 1 FH3540 F3 horiz. segreg. Kit 400x600mm (hxw) K 1
FH4220 Fairlead plate F4 h=200mm 2 FH4220 Fairlead plate F4 h=200mm 2

ArTu
Additional
panel
Additional
panel
Tmax T5, T3, T2 and modular panels, complete with 1600A busbars vertically on side of structure - Icw max
5 50kA
IP3040 No.2 hor. finishing sections IP31 w=400mm K 1
IP3180 No.2 vert. finishing sections IP31 h=1800mm K 1
KT2410 T2 3/4P hor. fixed segreg. Kit, K 2
KT3410 T3 3/4P hor. fixed segreg. Kit, K 1
KT5122 T5 segr. hor. fixed Kit 300x400mm(hxw)K 1
LA1880 No.2 ventilated side panels 1800x800mm (hxw) K 1
PB1601 Linear busbar holder In=1600A (75 kA) 5
PC2400 Blind panel 200x400mm (hxw) K 2
PC4400 Blind panel 400x400mm (hxw) K 1
PF2405 Plain plate 200x400mm (hxw) segreg. K 2
PF4405 Plain plate 400x400mm (hxw) segreg. K 1
SH4000 Busbar hor. shelf w=400mm, K 2
SH4030 Busbar hor. segregation w=400mm, K 1
SK1800 No.4 ArTu K uprigh ts h=1800mm 1
SK1802 No.2 funct. frames h=1800mm closed K 1
SV4061 Busbar vert. segregation 200x400mm (hxw) K 1
TV8005 No.2 funct. frame struct. crosspieces d=800mm 3
Segregation Form 3
FH3220 F3 horiz. segreg. Kit 200x600mm (hxw) K 4
Segregation Form 4
FH4220 Fairlead plate F4 h=200mm 2

ArTu
T T T
Additional panel
Tmax T6, T3, T2, XT3, XT4 and modular panels, complete with 1600A busbars vertically on side of structure -
Icw max 50kA 5
GD7005 DIN rail Kit w=700mm segreg. K, PC 1 GD7005 DIN rail Kit w=700mm segreg. K, PC 1
KT6210 T6 vert. fixed segreg. Kit, K 1 KT6210 T6 vert. fixed segreg. Kit, K 1
SH2030 Busbar hor. segregation w=600mm, K, PC 1 SH2030 Busbar hor. segregation w=600mm, K, PC 1
SH6000 Busbar hor. shelf w=600mm, K 2 SH6000 Busbar hor. shelf w=600mm, K 2
SV2061 Busbar vert. segregation 200x600mm (hxw) K 1 SV2061 Busbar vert. segregation 200x600mm (hxw) K 1
VC2020 Cable container int. segreg. 2000x200mm (hxw) K 1 VC2020 Cable container int. segreg. 2000x200mm (hxw) K 1
FH3220 F3 hor iz. segreg. Kit 200x600mm (hxw) K 4 FH3220 F3 hor iz. segreg. Kit 200x600mm (hxw) K 4
FV3668 S6 vert. F3 segreg. Kit600x800mm (hxd) 1 FV3668 S6 vert. F3 segreg. Kit600x800mm (hxd) 1
FV4668 Fairlead plate F4 vert. d=800mm 1 FV4668 Fairlead plate F4 vert. d=800mm 1

ArTu
ArTu K Series dim. 1800x300x700 (2031x420x837) mm (external hxwxd) IP65 complete with 1250A busbars
vertically on side of cable riser - Icw max 50kA
5 Code Description Q.ty
AD1014 Lateral side-by-side Kit, K 1
AD1066 No.4 busbar adapters In=800A with busbar holder up to 1600A 2
PB1600 Scaled busbar holder In=1600A (75 kA) 5
PO1831 Blind door 1800x300mm (hxw) L, M int. 1
PO1833 Blind door 1800x300mm (hxw) K ext. 1
RF1830 Cable container rear panel 1800x300mm (hxw) K 1
TV8101 No.2 int./ext. cable cont. crosspieces d=800mm 3
VC3080 Cable container 300x800mm (wxd) K 1

ArTu ArTu
Additional panel
Additional panel
Additional panel
Additional panel
SACE
Additional panel
Additional panel
ArTu K Series 2 x dim.2000x1600x700 (2231x1924x837) mm (external hxwxd) IP65 complete with 1600A
horizontal and 1250A vertical busbars - Icw max 75kA
5
AD1014 Lateral side-by-side Kit, K 1 AD1014 Lateral side-by-side Kit, K 1
AD1064 No.12 coupling screws w=27 x flat up to 10mm 4 AD1064 No.12 coupling screws w=27 x flat up to 10mm 4
AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 1 AD1069 No.4 connect. coupling busbars from 1250/1600A to 800A 1
KE3215 Kit per Emax E1, E2, E3 vert. fixed 1 KE3215 Kit per Emax E1, E2, E3 vert. fixed 1
KT2111 T2 Kit 3/4P horiz. fixed without segreg. K 2 KX2611 XT2 Kit 3/4P horiz. fixed without segreg. K 2
KT4111 T4 Kit hor. fixed+access. 200x600mm (hxw) K 2 KX4611 XT4 Kit hor. fixed+access. 200x600mm (hxw) K 2
TV8001 No.2 open frame structure crosspieces d=800mm 3 TV8001 No.2 open frame structure crosspieces d=800mm 3
TV8211 No.2 structure crosspieces w=800mm 2 TV8211 No.2 structure crosspieces w=800mm 2
VC2023 Internal cable cont.2000x200mm (hxw) K 2 VC2023 Internal cable cont.2000x200mm (hxw) K 2

ArTu ArTu
Additional panel
Additional panel
Additional panel
Additional panel
SACE
Additional panel
Additional panel
ArTu K Series 2 x dim.2000x1600x700 (2231x1924x837) mm (external hxwxd) IP65 complete with 3200A
horizontal and 1250A vertical busbars - Icw max 75kA
AD1064 No.12 coupling screws w=27 x flat up to 10mm 4 AD1064 No.12 coupling screws w=27 x flat up to 10mm 4
AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A 2 AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A 2
KE3215 Kit per Emax E1, E2, E3 vert. fixed 1 KE3215 Kit per Emax E1, E2, E3 vert. fixed 1
KT4111 T4 Kit hor. fixed+access. 200x600mm (hxw) K 2 KX4611 XT4 Kit hor. fixed+access. 200x600mm (hxw) K 2
TV8001 No.2 Open frame struct. crosspieces d=800mm 3 TV8001 No.2 Open frame struct. crosspieces d=800mm 3
VC2023 Int. reduced cable cont.2000x200mm (hxw) K 2 VC2023 Int. reduced cable cont.2000x200mm (hxw) K 2

ArTu
ArTu K Series dim. 2000x600x500 (2231x748x637) mm (external hxwxd) IP65 with back plate h=2000

5
AD1050 No.2 pair of tracks x back plate w=600mm 1
PF2006 Plain plate 2000x600mm (hxw) K 1
PO2061 Blind door 2000x600mm (hxw) K 1

ArTu ArTu ArTu
SACE
Additional Additional
panel panel
panel panel
panel panel
panel panel
ArTu K Series dim. 1800x1580x700 (2031x1984x837) mm (external hxwxd) IP65 with Emax E1, T5, T3, XT3,
1600A omnibus busbars and vertical 800A branches - Icw 50kA
KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 1 KE3215 Kit E1, E2, E3 vert. fixed without segreg. K 1
KT3419 XT3 Kit 3/4P horiz. fixed without segreg. K 2 KX3411 T3 Kit 3/4P horiz. fixed without segreg. K 2
KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4 KT5411 T5 Kit horiz. fixed 300x400mm (hxw) K 4
SK1880 Open frame int. cable cont. rear assembly h=1800mm 1 SK1880 Open frame int. cable cont. rear assembly h=1800mm 1
TV6221 No.2 funct. frame struct. crosspieces w=600mm 1 TV6221 No.2 funct. frame struct. crosspieces w=600mm 1
TV8011 No.2 structure crosspieces d=800mm 1 TV8011 No.2 structure crosspieces d=800mm 1

ArTu ArTu ArTu ArTu ArTu
SACE SACE
SACE
panel panel
panel panel
ArTu K Series dim. 1800x2280x700 (2031x2904x837) mm (external hxwxd) IP65 with Emax E1, T5, T3, XT3 1600A
omnibus busbars and vertical 1250A branches - Icw 50kA
5
PO1833 Blind door 1800x300mm (hxw) K ext. 1 PO1833 Blind door 1800x300mm (hxw) K ext. 1
RF1830 Cable container rear panel 1800x300mm (hxw) K 1 RF1830 Cable container rear panel 1800x300mm (hxw) K 1
VC3080 Cable container 300x800mm (wxd) K 1 VC3080 Cable container 300x800mm (wxd) K 1

ArTu ArTu ArTu
SACE
ArTu K Series dim. 1800x2400x700 (2031x2784x837) mm (external hxwxd) IP65 with Emax E1, T4 , T1, XT4, XT1,
AD1014 Lateral side-by-side kit, K 2 AD1014 Lateral side-by-side kit, K 2
KT1111 Kit T1 3/4P horiz. fixed without segreg. K 2 KX1611 Kit XT1 3/4P horiz. fixed without segreg. K 2
KT4111 T4 Kit hor. fixed+access.200x600mm (hxw) K 6 KX4611 XT4 Kit hor. fixed+access.200x600mm (hxw) K 6
TV8001 No.2 open frame struct. crosspieces d=800mm 2 TV8001 No.2 open frame struct. crosspieces d=800mm 2

ArTu ArTu ArTu ArTu ArTu
SACE SACE
SACE
panel panel
SACE
panel panel
ArTu K Series dim. 1800x2280x700 (2031x2900x837) mm (external hxwxd) IP65 with Emax E2, T5, T3, XT3 3200A
omnibus busbars and vertical 1600A branches - Icw 65kA
5
AD1073 No.4 busbar section T-couplings 3200A 1 AD1073 No.4 busbar section T-couplings 3200A 1
AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A 1 AD1078 No.4 connect. coupling busbars from 3200A to 1600/1250A 1
VC3080 Cable container 300x800mm (wxd) K 2 VC3080 Cable container 300x800mm (wxd) K 2

ArTu ArTu ArTu ArTu ArTu ArTu ArTu ArTu ArTu
panel panel
SACE SACE SACE
Additional
panel
SACE SACE SACE SACE
Riserva
panel panel
Additional Additional Additional
Riserva
panel panel panel
ArTu K Series dim. 1800x4680x900 (2031x5804x1037) mm. (external hxwxd) IP65 with Emax E3, T5, T3, XT3,
BP1600 No.2 busbar holders x cross-section 10mm 9 BP1600 No.2 busbar holders x cross-section 10mm 9
BP3200 No.2 busbar holders 3 phase busbars cross-sect. 10mm 6 BP3200 No.2 busbar holders 3 phase busbars cross-sect. 10mm 6
BR1600 No.2 busbars cross-section100x10mm w=1750mm 29 BR1600 No.2 busbars cross-section100x10mm w=1750mm 29
TR1201 No.2 hor. struct. busbar crosspieces d=1000mm 6 TR1201 No.2 hor. struct. busbar crosspieces d=1000mm 6
VC3010 ArTu K Base/Top/Base strip 300x1000mm (wxd) 1 VC3010 ArTu K Base/Top/Base strip 300x1000mm (wxd) 1

Gemini
Compliance with Standards and technical characteristics 6/2
IP degree of protection 6/4
IK degree of resistance to impacts 6/5
Double insulation 6/6
Self-extinguishing tests 6/6
Resistance to chemical agents 6/7
Disposal instructions 6/8
ArTu distribution switchgear

Mechanical and electrical characteristics 6/10
Declaration of conformity 6/12
Dissipated power 6/13
Handling 6/21
Electrical continuity 6/23
Equipotential conductors 6/24
Degrees of protection 6/26 6
IK mechanical resistance to impact 6/28
Busbars with shaped section and flat busbars

Mechanical and electrical characteristics 6/29
Busbar with shaped section
Busbar holders 6/30
Components 6/32
Flat busbar 6/34
Components 6/35
Unifix cabling system

Examples of connections - Unifix H 6/36
Examples of connections - Unifix L 6/37
Segregations
Examples of ArTu segregation 6/38
Special painting
RAL colour 6/39

Gemini switchboards
Compliance with Standards and technical characteristics
References Standard
The IEC 62208 Standard (“Empty enclosures for assembled protection and operating apparatus for low voltage. General Prescriptions”) has
implemented the EN 50298 Standard reissued in EN 62208 internationally, and is the reference for the Gemini switchboards: as its subject,
it has formulation of the definitions, classifications, characteristics and testing prescriptions for enclosures destined for uses in accordance
with the EN 60439 Standards and the new IEC 61439-1-2 Standard as part of protection and operating apparatus (switchboards), whose
rated voltage does not exceed 1000 V in alternating current for frequencies up to 1000 Hz or 1500 V in direct current and suitable for
general use in both indoor and outdoor applications.
The Standard refers to empty enclosures, before the user installs protection and operating apparatus.
The Standard does not apply to enclosures which, due to their construction and functional characteristics, are subject to other prescriptions
(e.g. enclosures for domestic and similar installations). In this case, the IEC 60670 – CEI 23-48 Standards are the reference (“Enclosures
for apparatus for fixed electrical installations for domestic and similar uses.
6 Part 1: general prescriptions”) and CEI 23-49 (“Enclosures for apparatus for fixed electrical installations for domestic and similar uses.
Part 2: special prescriptions for enclosures destined to contain protection devices and apparatus which dissipate a power that is not
negligible”).
On the basis of what is indicated by ABB SACE in the table of technical characteristics, if, necessary, the installer must certify conformity
with the CEI 23-51 (“Prescriptions for constructing, checking and testing distribution switchboards for fixed installations for domestic and
similar use”) or EN 60439-1/IEC 61439-1-2 Standards.

Compliance with Standards and technical characteristics
Table of Gemini switchboards’ technical characteristics
Size 1 2 3 4 5 6
Gemini with transparent door 1SL0211A00 1SL0212A00 1SL0213A00 1SL0214A00 1SL0215A00 1SL0216A00
Gemini with opaque door 1SL0201A00 1SL0202A00 1SL0203A00 1SL0204A00 1SL0205A00 1SL0206A00
External dimensions WxHxD (mm) 335x400x210 460x550x260 460x700x260 590x700x260 590x855x360 840x1005x360
Internal dimensions WxHxD (mm) 250x300x180 375x450x230 375x600x230 500x600x230 500x750x330 750x900x330
IP degree IP66 IP66 IP66 IP66 IP66 IP66
Double isolation yes yes yes yes yes yes
IK degree 10 10 10 10 10 10
GWT (°C) 750 750 750 750 750 750
Operating temperature -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C -25 °C … +100 °C
No. of DIN modules 24 (12x2) 54 (18x3) 72 (18x4) 96 (24x4) 120 (24x5) 216 (36x6)
No. of vertical modules (H=150 mm) 2 3 4 4 5 6
6
Material Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic
Color Grey RAL7035 Grey RAL7035 Grey RAL7035 Grey RAL7035 Grey RAL7035 Grey RAL7035
Fast wiring system Unifix L Unifix L Unifix L Unifix L Unifix L Unifix L
No. of locks 2 2 2 2 3 3
Rated frequency 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz
(1)
NORMA CEI 23-51 - IEC 61439-1-2
Max. potenza dissipabile (2) 45 W 72 W 85 W 102 W 156 W 248 W
STANDARD CEI EN 60439-1
Over-temperature (par. 8.2.1) (3)
Max. dispersible power with
over-temperature of 25 °C 40 W 65 W 77 W 91 W 133 W 205 W
Impulse withstand (par. 8.2.2)
- Rated service voltage ≤ 690 V ≤ 690 V ≤ 690 V ≤ 690 V ≤ 690 V ≤ 690 V
- Rated insulation voltage AC ≤ 1000 V ≤ 1000 V ≤ 1000 V ≤ 1000 V ≤ 1000 V ≤ 1000 V
- Rated insulation voltage DC ≤ 1500 V ≤ 1500 V ≤ 1500 V ≤ 1500 V ≤ 1500 V ≤ 1500 V
- Rated impulse withstand voltage 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV
(1)
Limits of Applicability of the CEI 23-51 Standard
The Standard is only applicable if the cabled switchboard fulfils all the following conditions:
fixed installation with average ambient temperature up to 25 °C, occasionally up to 35 °C;
alternating current with rated voltage up to 440 V;
rated incoming current up to 125 A;
rated prospective short-circuit current up to 10 kA or protection using current-limiting devices with limited current up to 15 kA in correspondence with their rated
breaking capacity.
(2)
The data on the maximum dissipated power were taken following the indications in the CEI 23-49 Standard, with a temperature difference of Dt=30 °C.
(3)
Note to paragraph 8.2.1 of Standard CEI EN 60439-1
The table gives the thermal dissipation values of Gemini switchboards when they are wall-mounted. The dispersible power figures (in Watts) vary according to
the overtemperature allowed in the accessible parts of the switchboard and must be compared with the total amount of power dissipated by all the components
installed inside the switchboard taking into due account the factor of contemporaneity.

Gemini switchboards
IP degree of protection
1st number according to EN 60529 Standard 2nd number according to CEI 70-1 IEC 60529 Standard
As indicated in the following table, the IP degree of protection is With IP66 degree of protection, Gemini switchboards are totally
expressed by two characteristic numbers depending on the protected against the penetration of dusts and sprays of seawater.
behaviorof the product to which it refers according to the
prescriptions of CEI 70-1 and IEC 529 Standards.
1st Number: protection against the penetration of solid bodies 2nd Number: protection against the penetration of water
1 1
No protection No protection
ø 50mm
2 2
Protection against the penetration
Protection against the penetration of
of solid bodies with a diameter of
6 drops of water falling vertically
over 50 mm
ø 12mm 15°
3 3
Protection against the penetration of Protection against the penetration
solid bodies with a diameter of over of drops of water falling at an angle
12 mm or a length of over 80 mm of up to 15° from vertical
4 4 60°
ø 2,5mm of drops of water falling at an angle
of solid bodies with a diameter or
of up to 60° from vertical
thickness of over 2.5 mm
5 5
ø 1mm Protection against the penetration of
of solid bodies with a diameter or
splashes of water from all directions
thickness of over 1.0 mm
6 Gemini 6 Protection against the penetration

Protection against the penetration of water sprayed by a hose from
of dusts all directions
7 7
Total protection against the penetration Protection against the penetration
of dusts of sea water
8
15cm

water during temporary immersion
9
water during continual immersion

IK degree of resistance to impacts
IK degree according to EN 62262 reference Standard. consists in let a weight falling down from a pre-established height.
The method specified in the EN 62262 Standard to determine the The degree of resistance to impacts is therefore obtained and it is
IK degree of resistance to impact is indicated in the table below. expressed in Joules
It specifies the resistance of equipment to impact. The proof
IK 0 IK 06 0,25 kg
400 mm
Resistance to impacts with
No protection against impacts
impact energy up to 1,00 J
IK 01 0,25 kg IK 07 0,50 kg
6
56 mm
400 mm
Resistance to impacts with Resistance to impacts with

impact energy up to 0,150 J impact energy up to 2,00 J
IK 02 0,25 kg
IK 08
1,7 kg
80 mm
300 mm

IK 03 0,25 kg
IK 09 5 kg
140 mm
200 mm

IK 04 IK 10 5 kg Gemini
0,25 kg
400 mm
200 mm

IK 05 0,25 kg
280 mm
Resistance to impacts with

impact energy up to 0,700 J

Gemini switchboards
Double insulation
Double insulation guarantees that Gemini is protected against indirect contacts on condition that the manufacturer’s
instructions are observed when carrying out mounting and wiring operations on the switchboard and that the appropriate
accessories are used (e.g. screw-cover caps).
Self-extinguishing tests
Test text Equipment Compliance Purpose Test Test conditions
required with of the test results Heat Length Character.
Standards
source of test elements
Glow wire IEC 695-2-1 To assess the danger of If a flame is generated, Glow wire 30 sec. Assessment
(GLOW WIRE CEI 50-11 fire by simulating it must go out within ø 4 mm of the time
TEST) thermal 30 seconds of removing it takes for
stresses produced the glow wire. the flame to
6 by heat sources or The test is conducted go out
by ignition (e.g. glowing at temperatures of:
elements, resistances - 650°C
overloaded for short - 750°C
intervals) - 850°C
- 960°C

Resistance to chemical agents
The behavior of Gemini switchboards in the presence of chemical agents is indicated in the table with the symbols:
High resistance Limited resistance

Cold water
Hot water
Sulfuric acid 50%
Hydrochloric acid 36%
Acetic acid 60%
Benzol
Gasoline
Acetone
Ethyl alcohol
Ammonia
Dichlromethane 6
Diesel oil - naphtha
Mineral oils and greases
Food oils and greases
Perchloroethylene
Trichlorethene
Ethylether
Toluene
Methanol
Wine
Fruit juices
Laundry lye
Detergents

Gemini switchboards
Disposal instructiones
Information about how to dispose of Gemini switchboards when they reach the end of their life
Instructions are given below about the procedures to adopt when disposing of Gemini switchboards at the end of their life cycle.
The text is drafted in the form of a table referring to Standard CEI 308-1 “Information table concerning the end of life of electric and
electronic products and a compilation guide”, 2002-04, ed. 1, pamphlet number 308-1 6454.
Section I – Global product specification
Name Type of product

Rated weight External dimensions
Size With transparent door With opaque door [kg] WxHxD (mm)
1 1SL0211A00 1SL0201A00 4,3 335x400x210
2 1SL0212A00 1SL0202A00 7,9 460x550x260
3 1SL0213A00 1SL0203A00 9,5 460x700x260
4 1SL0214A00 1SL0204A00 12,0 590x700x260
6 5 1SL0215A00 1SL0205A00 17,8 590x855x360
6 1SL0216A00 1SL0206A00 21,1 840x1005x360
Section II – Global product table

General code: CER 17 02 03 plastic (more than 95% of the product’s weight)
No. of the Quantity

component part % over Material Dangerousness
P1, P2, etc.) Diagram total weight description Symbol (Yes/No) CER Code
P5/ACCESSORIES
P1/BOX
P2/ROOF Polypropylene No 17 02 03
>PP<
80%
P2/ROOF Polypropylene No 17 02 03
>PP<
P3/DOOR 20% Polycarbonate No 17 02 03

>PC<
P4/ACCESSORIES < 5% Steel - No 17 04 05
P3/DOOR
P1/BOX
P5/ACCESSORIES P4/ACCESSORIES < 5% Brass - No 17 04 01

Disposal instructiones
Section III – Components to be removed from the product and sent for separate treatment
Refer to section II of the table for a description of the materials.
Notes for recovery and disposal

At the end of its life, after separating it from components, the product can be sent to be recovered.
The product is not biodegradable: do not dispose of it in the environment.
The product/waste product is assimilable as solid urban waste. It must be incinerated or disposed of in compliance with current EEC,
national and local regulations. You are recommended to check all reutilization possibilities.
Other recommendations
The information in this table relates to the product in the condition it was supplied. Assembled parts coming from different supplies
must be treated separately according to the reference specifications of the respective manufacturers.
Section IV – Safety instructions
Handling
No special instructions. Refer to the general regulations concerning hygiene on the workplace when using.
The product’s main components contain mineral additives and coloring agents in concentrations that comply with current European
Directives at the time this catalogue went to press: they do not contain substances classified as dangerous.
Transport
No special instructions.
Storage
No gas or harmful vapors are released during storage. Thermal decomposition in the event of fire or combustion may release
dangerous products: if this should occur, specific means of protection must be used. In the event of fire, conventional fire
extinguishing instruments are recommended (atomized water, foam, carbon dioxide, powder).
Empty packages are not contaminated by the product and can therefore be recycled or reused.
Utilization
No special instructions.
Other instructions
The information given in this section is based on current ABB SACE know-how and is aimed at describing the product only for
environmental, health and safety purposes. It must not, therefore, be considered as a guarantee of specific properties. ABB SACE
assumes no responsibility for the behavior of buyers that do not comply with the information given in this table and for incorrect or
improper usages of the product or usages that cannot reasonably be envisaged.

Mechanical and electrical characteristics

Conformity with the CEI EN 60439-1/IEC 61439-1-2 Standard
The ArTu switchboards have undergone the type tests foreseen by the CEI EN 60439-1 Standard and the new IEC 61439-1-2 Standard
at the ABB type test laboratories. The results of these tests guarantee the performances of the ArTu switchboards and allow the end
constructor of the switchboard using ABB SACE metal structures, air, moulded-case and modular circuit-breakers, not to carry out
further type tests, respecting the selection criteria and the assembly instructions of the various components. These results, given below,
can be referred to for drawing up the declaration of conformity of the electric switchboard.
Overtemperature (Ref. par. 8.2.1. of the Standard)

In the tables on page 5/5 and following, the thermal dissipation values are indicated, referring to all the dimensions of the ArTu
switchboards and to the type of installation, deriving from the type tests carried out. The dissipated power data (in Watts) are according
to the admissible overtemperature inside the switchboard in the upper part, and must be compared with the sum of the powers
dissipated by all the components installed inside the switchboard (taking appropriately into account the factor of contemporaneity).
Dielectric properties (Ref. par. 8.2.2 of the Standard)

6
Wall-mounted ArTu L Floor-standing ArTu L Wall-mounted ArTu M ArTu M floor
D=200mm D=250mm D=150/200mm ArTu K D=250mm ArTu K
Rated service voltage: up to 690V AC up to 690V AC up to 690V AC up to 690V AC up to 1000V AC
Rated insulation voltage: up to 1000V AC up to 1000V AC up to 1000V AC up to 1000V AC up to 1000V AC
Rated impulse withstand voltage: 6 kV 8 kV 6 kV 8 kV 8 kV
Short-circuit withstand current (Ref. par. 8.2.3 of the Standard)

Rated short-time short-circuit phase-phase 25 kA (1s) 35 kA (1s) 25 kA (1s) 35 kA (1s) 105kA (1s)
current: 50kA (3s)
phase-neutral 9 kA (1s) 21 kA (1s) 9kA (1s) 21 kA (1s) 60 kA (1s)
Rated max. peak short-circuit current 52,5kA 73kA 52,5kA 73kA 254kA
Efficiency of the protection circuit (Ref. par. 8.2.4 of the Standard)

Following the assembly indications of the metal components, the effective electrical continuity between the exposed conductive parts
(Ref. par. 8.2.4.1): is verified, with negligible resistance values.
(Ref par. 8.2.4.2): Protection circuit short-circuit withstand current: phase-earthing busbar
9 kA (1s) 21 kA (1s) 9 kA (1s) 21 kA (1s) 60 kA (1s)
Insulation distances (Ref. par. 8.2.5 of the Standard)

The insulation distances are guaranteed by following the ABB SACE metalwork structure and circuit-breaker assembly and mounting instructions.
Mechanical operation (Ref. par. 8.2.6 of the Standard)

Mechanical operation is verified by following the assembly and mounting instructions for the ABB SACE metalwork structures and circuit-breakers.
Degree of protection (Ref. par. 8.2.7 of the Standard) According to CEI EN 60529 (CEI 70-1 publication IEC 529)
Without door IP31 IP31 - IP 31 IP31
With door/without door and ventilated side panels - - - - IP41
With door IP43 IP43 IP 65 IP 65 IP 65

Mechanical characteristics
Material
ArTu L structure 12/10mm thick pickled steel sheet
ArTu M structure 15/10mm thick pickled steel sheet (floor-mounted) / 15/10mm hot galvanised sheet (wall-mounted)
ArTu K structure 15/10mm thick steel sheet
Panels 12/15/10mm thick steel sheet
Doors 15/10mm hot galvanised steel sheet. 4mm thick glass tempered from inside
Plates hot galvanised steel sheet, thickness: Plates 20/25/10mm
Painting
Structure colour Grey orange-peel RAL 7035
Base strip colour Grey orange-peel RAL 7012
Standard cycle Sheet washing
Phosphating with iron salt base
Drying in tunnel at 100°C
6
External and internal painting with electrostatic application of thermosetting powder enamel with epoxy polyester
binders. Grey orange-peel RAL 7035 colour, total thickness: 60/70 micron.
Polymerisation in oven at 180°C.
Paint characteristics Binder: epossipoliestere
Specific gravity: 1,61g/cm3
Theoretical coverage: 10,4 m2/Kg. con film di spessore medio 60 micron
Melting point: 85-95 °C (Metodo banco Kofler)
Granulometry: standard distribution between 5 and 100 micron with average size
particles between 30 and 40 micron. Hardening: 12 min. at 190 °C (temperature of object)
Hardness: 1H - 2H
DIN 53152 bending elasticity: unaltered on 1/4” spindle
DIN 53151 reticular adherence: GT O (100%)
Erichem elasticity: SEN DIN 53156: > 6mm
Gardner resistance to impact: 25 Kg. x cm.
Tests carried out on degreased and phosphated sheets with film thickness of 60/70 micron.
The painting has passed the resistance tests to saline fog (193 hours).
Ambient characteristics
Type of installation indoors
Installation conditions Wall / Floor-mounted
Service climate (t° / r.h. %) constant 23°C/83% - 40°C/93%
variable 23°C/98% - 40°C/98%
Ambient temperature limits operating -5°C +40°C
storage -25°C +55°C

ABB SACE declaration of conformity

ArTu switchgear with the following rated characteristics:
Rated service voltage up to 690V / up to 1000V for ArTu K
Rated insulation voltage up to 1000V
Rated current / ICW ArTu L wall-mounted up to 250 A / 25 kA
ArTu L floor-mounted up to 800 A / 35 kA
ArTu K up to 4000 A / up to 105 kA
ArTu M floor-mounted and K D=250mm up to 630 A / 35 kA
ArTu M D=150/200mm up to 250 A / 25 kA
Grado di protezione ArTu L IP31 (without door), IP 43 (with door)
ArTu K IP31 (without door), IP41 (with door and side ventilation), IP65 (with door)
ArTu M D=250mm IP31 (without door), IP65 (with door)
ArTu M D=150/200mm IP 65 (with door)
When correctly selected and assembled, as per the indications given in this catalogue and in the instruction manual, allow construction
6 of switchgear complying with the IEC 60439-1/IEC 61439-1-2Standard, on the basis of what is foreseen by the Low Voltage Directive
of the European Community (Directive 73/23/EEC, Law 791/1977).
The above is valid if the switchgear is designed and constructed:

- selecting the materials according to the performances indicated in the ABB catalogues;
- sizing the conductors according to the prescriptions of the IEC 60439-1 and CEI 64-8 Standards;
- carrying out the individual tests foreseen under the IEC 60439-1 Standard successfully.
Technical information
Information regarding the methods for disposal and end of product life
ABB SACE has carried out a study on the end of product life. Evaluation is made by means of applying the LCA (Life Cycle Assessment)
method according to ISO 14040 - 1997 and in conformity with the requirements established by the SEMC in the document ISO TR
14025 TYPE III Environmental Declarations (MSR 1999:2 – “Guidelines for the Environmental Product Declaration”).
The study was carried out taking into consideration the disposal and recycling processes of the main materials making up a typical
switchboard.
Starting from the basic list, the facility of dismantling and separating each piece, as well as recyclability of the materials was considered,
and the product results as being almost completely recyclable.
Again starting from the basic list reduced to the significant components, the end of life of each of these was evaluated.
The flows of recyclable materials, materials to be recovered (or for incineration), given in the Table resulted. According to the hypotheses
made, no material should end up directly in the dump.
Substance Destination
Aluminium waste Recycling
Copper waste Recycling
Polyurethane gaskets Incineration
Glass fibres Recycling
Glass waste Recycling
Paper/cardboard Recycling
Plastic Insulators Recycling
Sheet metal waste Recycling

Dissipated power
ArTu IP 31 switchgear
Separate housing Separate housing First or last First or last housing Central housing Central housing
exposed on all sides wall-mounted housing exposed wall-mounted exposed wall-mounted
Max. dissipated Max. dissipated Max. dissipated Max. dissipated Max. dissipated Max. dissipated
power (W) power (W) power (W) power (W) power (W) power (W)
Code 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C
ArTu L
SL0600 99 125 150 176 95 118 143 168 91 113 137 160
SL0800 106 134 160 188 100 125 152 178 107 132 160 189 6
SL1000 122 152 184 216 116 143 174 204 113 141 170 201
SL1200 135 170 205 241 128 161 193 228 126 156 189 223
SL1400 174 217 265 312 155 195 237 278 168 211 255 301 145 183 221 261 164 206 250 295 140 176 213 252
SL1600 194 242 294 347 171 213 259 306 185 232 281 332 160 200 242 286 180 226 274 323 154 193 233 276
SL1800 211 264 320 378 184 231 281 331 200 251 305 360 173 217 262 309 195 244 296 350 166 208 252 298
SL2000 227 285 345 408 197 248 300 354 215 270 327 386 185 231 281 331 206 262 318 375 178 223 271 319
SL1408 246 309 374 442 206 257 311 369 237 297 360 425 197 246 299 352 229 287 348 410 190 239 288 341
SL1608 273 342 415 490 231 289 351 415 264 331 402 474 220 276 331 395 253 318 385 454 211 265 321 380
SL1808 286 359 435 513 245 308 373 441 278 349 422 498 235 295 358 422 268 337 408 482 229 287 348 411
SL2008 303 380 461 543 271 340 411 485 298 374 453 535 263 329 399 471 294 367 446 526 254 318 385 455
ArTu M
SM 1462 179 225 272 313 159 199 241 285 172 216 261 309 149 186 226 267 168 210 255 301 143 180 218 257
SM 1662 196 246 298 352 173 217 263 310 187 235 285 336 161 203 245 290 182 229 277 327 156 195 236 279
SM 1682 248 311 377 445 218 274 331 391 241 303 367 433 206 259 313 370 238 298 361 427 201 252 306 361
SM 1862 212 266 323 381 186 233 282 333 202 253 307 362 174 218 264 311 196 246 298 352 167 210 254 300
SM 1882 270 339 410 484 236 296 358 423 261 328 397 469 223 279 338 399 257 322 391 461 217 272 330 389
SM 2062 228 286 346 409 198 248 301 355 215 270 327 386 185 232 281 331 209 262 317 375 178 223 270 319
SM 2082 291 365 442 521 252 316 383 453 280 351 425 502 238 299 362 427 275 345 418 494 232 291 353 417
ArTu K - H=1600mm
SK 6025 206 257 310 367 185 229 275 325 198 247 298 351 172 215 257 305 192 242 290 342 167 207 248 283
SK 8025 260 322 391 460 230 286 345 406 252 315 380 448 216 273 325 385 250 310 373 442 212 265 320 376
ArTu K - H=1800mm
SK 6025 222 278 338 396 196 245 295 348 212 255 320 377 184 230 276 325 206 258 310 368 178 222 267 315
SK 8025 280 350 423 500 247 310 370 438 271 340 410 485 233 290 350 415 270 335 405 476 228 285 342 404
SK 4040 223 280 338 400 208 258 314 371 208 262 315 374 187 234 281 332 193 246 296 350 170 215 260 310
SK 6040 285 357 433 511 259 324 393 464 268 336 407 481 237 297 359 424 255 320 387 457 223 279 338 400
SK 8040 356 446 540 638 319 400 484 572 339 425 515 608 296 371 449 530 327 410 496 586 283 355 430 508
SK 4050 257 322 389 460 242 301 366 433 237 298 359 425 216 270 324 383 217 276 332 393 194 245 297 353
SK 6050 328 412 499 589 302 378 458 541 306 383 464 549 273 342 414 489 286 359 434 513 254 319 386 456
SK 8050 390 489 592 699 367 461 558 659 374 469 568 671 339 425 514 607 365 458 554 654 321 403 488 577
SK 4060 290 364 440 520 276 344 418 494 265 333 402 476 244 305 367 434 240 305 367 435 218 274 333 395
SK 6060 371 466 564 666 344 432 523 617 343 430 521 616 309 387 469 553 316 397 481 568 285 358 434 512
SK 8060 423 531 643 759 415 521 631 745 408 512 621 733 381 478 579 684 402 505 611 722 359 451 546 645
Dissipated power inside the ArTu switchgear according to the admissible overtemperature. CONTINUED

Dissipated power
Max. dissipated Max. dissipated Max. dissipated Max. dissipated Max. dissipated Max. dissipated
power (W) power (W) power (W) power (W) power (W) power (W)
ArTu K - H=1800mm
SK 4080 371 461 560 668 349 440 535 622 329 410 495 588 300 377 457 539 297 370 455 536 273 343 415 491
6 SK 6080 428 537 651 769 426 535 648 765 407 511 619 731 388 486 589 695 384 481 583 688 352 442 535 632
SK 8080 489 614 743 877 478 599 726 857 463 581 703 830 450 564 683 807 454 570 690 815 434 544 659 778
SK 4010 445 553 672 802 419 528 642 746 395 492 594 706 360 452 548 647 356 444 546 643 328 412 498 589
SK 6010 514 644 781 923 511 642 778 918 488 613 743 877 466 583 707 834 461 577 700 826 422 530 642 758
SK 8010 587 737 892 1052 574 719 871 1028 556 697 844 996 540 677 820 968 545 684 828 978 521 653 791 934
SK1010 683 824 961 1098 670 812 968 1123 651 793 945 1102 632 776 927 1086 638 780 930 1089 612 757 913 1070
ArTu K - H=2000mm
SK 6025 240 298 358 424 208 260 313 370 225 282 340 402 195 245 295 346 219 275 329 388 188 234 282 334
SK 8025 306 377 457 536 262 328 395 468 290 363 440 520 248 312 377 442 285 358 429 509 242 304 365 432
SK 4040 242 304 368 435 224 268 337 399 223 280 339 399 200 251 304 359 209 260 316 377 183 230 278 329
SK 6040 304 382 463 546 277 347 420 496 287 360 436 514 253 317 384 454 273 342 415 489 237 298 360 426
SK 8040 368 462 559 660 340 427 517 610 362 454 550 650 315 395 479 565 349 437 530 625 301 378 458 541
SK 4050 277 349 422 498 261 314 393 465 254 318 385 454 203 289 350 413 234 291 354 422 208 262 316 374
SK 6050 343 431 522 616 324 406 491 580 327 410 497 586 292 384 444 524 307 384 466 549 271 340 411 486
SK 8050 402 504 611 721 381 479 580 684 390 489 592 700 359 450 546 644 381 433 579 684 341 428 518 612
SK 4060 312 393 476 561 297 360 448 530 284 356 431 508 260 327 395 467 258 322 392 466 233 293 354 419
SK 6060 382 479 581 685 370 464 562 663 367 460 557 658 331 451 503 594 340 426 516 609 304 381 462 545
SK 8060 436 546 662 781 422 530 642 758 417 524 634 749 402 505 612 722 413 519 628 742 380 477 578 682
SK 4080 393 495 598 705 378 475 577 680 356 444 538 636 306 386 469 550 319 397 480 565 291 365 442 525
SK 6080 441 554 671 792 435 546 662 781 416 522 632 746 408 512 620 732 406 509 617 728 373 468 566 669
SK 4010 472 594 718 846 454 570 692 816 427 533 646 763 367 463 563 660 383 476 576 678 349 438 530 630
SK 6010 529 665 805 950 522 655 794 937 499 626 758 895 490 614 744 878 487 611 740 874 448 562 679 803
SK 8080 512 643 778 919 494 620 751 887 480 602 729 861 461 578 701 827 466 585 709 837 451 566 685 809
SK 8010 614 772 934 1103 593 744 901 1064 576 722 875 1033 553 694 841 992 559 702 851 1004 541 679 822 971
SK1010 721 864 1022 1198 700 858 1023 1184 681 833 987 1145 659 799 947 1100 670 814 967 1123 653 792 938 1092
Dissipated power inside the ArTu switchgear according to the admissible overtemperature.

Dissipated power
ArTu IP 31 switchgear with ventilated side panels
Separate housing Separate housing First or last First or last housing
exposed on all sides wall-mounted housing exposed wall-mounted
Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W)
Code 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C 25 °C 30 °C 35 °C 40 °C
ArTu K - H=1800mm
K 4060 442 570 707 852 421 544 675 813 325 420 521 628 312 402 499 601
SK 6060 515 664 824 993 486 627 778 938 396 511 634 764 368 475 589 710
SK 8060 590 761 944 1138 553 713 885 1067 461 594 737 889 426 550 682 823 6
SK 4080 599 773 959 1155 581 749 930 1120 409 528 654 789 393 508 630 759
SK 6080 685 885 1097 1323 660 852 1057 1274 496 640 793 956 461 595 738 889
SK 8080 772 996 1236 1489 725 936 1161 1399 551 711 882 1064 498 695 863 1040
SK 4010 799 1031 1279 1540 726 936 1163 1400 511 660 818 986 462 598 741 893
SK 6010 913 1180 1463 1764 825 1065 1321 1593 620 800 991 1195 542 700 868 1046
SK 8010 1029 1328 1648 1985 906 1170 1451 1749 689 889 1103 1330 586 818 1015 1224
SK1010 1196 1487 1778 2064 1057 1321 1612 1910 806 1011 1235 1471 685 937 1147 1373
ArTu K - H=2000mm
SK 4060 446 574 710 855 426 550 682 822 328 425 525 632 314 406 504 605
SK 6060 529 683 847 1021 491 634 786 948 399 515 639 770 372 480 595 717
SK 8060 596 769 955 1151 565 728 904 1089 464 598 742 894 431 556 690 831
SK 4080 605 780 968 1167 584 754 935 1128 413 532 658 794 397 512 636 766
SK 6080 691 892 1107 1334 665 858 1065 1283 503 648 804 970 472 608 755 910
SK 8080 804 1037 1287 1551 738 953 1182 1425 575 742 920 1109 536 692 859 1035
SK 4010 807 1040 1291 1556 730 943 1169 1410 516 665 823 993 467 602 748 901
SK 6010 921 1189 1476 1779 831 1073 1331 1604 629 810 1005 1213 555 715 888 1071
SK 8010 1072 1383 1716 2068 923 1191 1478 1781 719 928 1150 1386 631 814 1011 1218
SK1010 1258 1548 1877 2246 1089 1373 1678 1982 850 1070 1297 1536 751 937 1138 1350

Dissipated power
ArTu IP 31 switchgear with 2 ventilated side panels and 2 ventilated front panels H=200mm
ArTu K - H=1800mm
SK 6060 571 737 914 1102 541 698 866 1044 428 552 685 826 406 524 650 784
SK 8060 649 837 1038 1252 611 788 978 1179 502 648 804 969 460 593 736 887
6 SK 6080 737 951 1180 1422 712 919 1140 1374 552 713 884 1066 518 668 829 999
SK 8080 836 1079 1339 1613 787 1016 1261 1519 625 806 1000 1205 595 768 953 1149
SK1010 1295 1606 1926 2235 1147 1444 1750 2074 914 1146 1401 1666 818 1035 1266 1516
ArTu K - H=2000mm
SK 6060 586 756 938 1131 546 705 874 1131 434 560 695 838 407 525 651 785
SK 8060 654 844 1047 1261 623 804 997 1202 507 654 811 978 468 604 749 903
SK 6080 741 956 1186 1429 715 923 1145 1380 560 723 897 1081 527 680 843 1016
SK 8080 861 1112 1379 1662 792 1022 1268 1528 640 826 1024 1234 596 769 955 1151
SK1010 1333 1655 1983 2301 1154 1452 1759 2086 935 1176 1434 1706 820 1036 1263 1520

Dissipated power
ArTu IP 41 switchgear with ventilated side panels
ArTu K - H=1800mm
SK 4060 418 539 669 806 398 514 637 768 317 409 507 611 304 392 486 586
SK 6060 489 631 783 944 462 596 739 891 376 485 602 725 350 451 560 674
SK 8060 560 723 897 1081 525 678 841 1013 438 565 700 844 405 523 648 781 6
SK 6080 651 840 1042 1256 627 809 1004 1210 471 608 754 909 438 565 701 845
SK 4080 562 725 899 1084 544 703 872 1051 395 509 632 761 382 493 612 738
SK 8080 733 946 1174 1415 689 889 1103 1329 524 676 838 1010 473 661 819 988
SK 4010 749 967 1199 1445 725 937 1163 1401 494 636 790 951 449 580 720 868
SK 6010 868 1120 1389 1675 836 1079 1339 1613 589 760 943 1136 515 665 825 994
SK 8010 977 1261 1565 1887 919 1185 1471 1772 655 845 1048 1263 556 778 964 1162
SK1010 1135 1408 1688 1962 1072 1338 1634 1935 766 960 1173 1397 650 891 1089 1303
ArTu K - H=2000mm
SK 4060 422 543 671 809 403 519 644 777 320 413 511 615 309 398 492 591
SK 6060 503 649 805 970 466 602 747 900 379 489 607 732 353 456 565 681
SK 8060 566 731 907 1093 536 692 859 1035 440 568 705 850 410 528 656 790
SK 4080 567 732 908 1094 547 706 876 1056 398 514 635 765 389 498 617 743
SK 6080 657 847 1051 1267 632 815 1011 1219 477 616 764 921 448 578 717 864
SK 8080 764 985 1222 1474 701 905 1123 1353 546 705 874 1054 510 658 816 983
SK 4010 756 976 1211 1459 729 941 1168 1408 498 643 794 956 458 586 726 874
SK 6010 876 1129 1401 1689 843 1087 1348 1625 596 770 955 1151 527 680 844 1016
SK 8010 1019 1313 1629 1965 935 1207 1497 1804 683 881 1093 1318 600 774 960 1156
SK1010 1196 1497 1782 2134 1103 1391 1699 1998 807 1016 1232 1460 714 891 1080 1281

Dissipated power
Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W) Max. dissipated power (W)
ArTu L
SL0600 90 113 137 162 86 108 131 155 82 103 125 147
SL0800 97 122 147 174 92 115 140 165 98 122 148 175
6 SL1000 113 141 171 202 107 134 162 191 104 131 158 187
SL1200 126 159 192 227 120 151 181 214 117 146 177 209
SL1400 158 197 241 284 141 177 215 253 153 192 232 274 132 166 201 237 149 187 227 268 127 160 194 229
SL1600 176 220 267 315 155 194 235 278 168 211 255 302 145 182 220 260 164 205 249 294 140 175 212 251
SL1800 192 240 291 344 167 210 255 301 182 228 277 327 157 197 238 281 177 222 269 318 151 189 229 271
SL2000 206 259 314 371 179 225 273 322 195 245 297 351 168 210 253 301 190 238 289 341 162 203 246 290
SL1408 224 281 340 402 187 234 283 335 215 270 327 386 179 224 272 320 208 261 316 373 173 217 262 310
SL1608 248 311 377 445 210 263 319 377 240 301 365 431 200 251 301 359 230 289 350 413 192 241 292 345
SL1808 260 326 395 466 223 280 339 401 253 317 384 453 214 268 325 384 244 306 371 438 208 261 316 374
SL2008 275 345 419 494 246 309 374 441 271 340 412 486 239 299 363 428 267 334 405 478 231 289 350 414

Dissipated power
ArTu M
SM 6061 70 88 107 126
SM 8061 71 90 108 128
SM 8062 83 104 126 149 6
SM 1062 95 119 145 171
SM 1262 107 134 162 192
SM 1462 159 200 242 278 141 177 215 254 153 192 233 275 132 166 201 237 149 187 227 268 127 160 194 229
SM 1662 175 219 265 313 154 193 234 276 167 209 253 299 144 180 218 258 162 204 247 291 138 174 210 248
SM 1682 221 277 336 396 194 244 295 348 215 269 326 385 184 230 279 329 212 265 321 380 179 224 272 321
SM 1862 189 237 287 339 165 207 251 297 180 225 273 322 154 194 235 277 175 219 265 313 149 186 226 267
SM 1882 240 301 365 431 210 263 319 376 232 291 353 417 198 249 301 355 229 287 348 410 193 242 294 347
SM 2062 203 254 308 364 176 221 268 316 192 240 291 344 164 206 250 295 186 233 282 334 158 199 241 284
SM 2082 259 324 393 464 224 282 341 403 249 312 379 447 212 266 322 380 245 307 372 440 207 259 314 371
ArTu K - H=1600mm
SK 6025 182 228 276 326 161 202 245 289 175 219 266 314 151 189 229 271 170 214 259 306 145 182 221 261
SK 8025 232 291 353 416 203 255 309 365 225 282 342 404 192 241 292 345 222 278 337 398 189 237 287 338
ArTu K - H=1800mm
SK 6025 199 250 303 357 175 220 266 315 190 239 289 342 164 206 249 294 185 233 282 333 158 198 240 283
SK 8025 251 315 382 451 221 277 335 396 244 307 371 439 209 262 317 375 241 302 366 432 204 256 310 365
SK 4040 193 242 293 346 179 224 271 320 178 223 270 319 160 201 243 287 165 207 251 296 146 184 222 263
SK 6040 254 318 385 455 230 289 350 413 238 299 362 428 210 264 320 378 227 285 345 407 198 249 301 356
SK 8040 316 397 481 568 284 356 431 509 302 378 458 541 263 330 400 472 291 365 442 521 252 316 383 452
SK 4050 223 284 344 406 213 267 323 381 206 258 313 370 188 236 286 338 188 236 286 338 170 213 258 305
SK 6050 292 366 443 524 268 336 407 481 271 341 413 488 242 304 368 435 279 319 386 456 226 284 343 406
SK 8050 346 435 526 622 326 409 496 586 332 417 505 596 301 378 458 540 324 407 493 581 286 358 434 413
SK 4060 260 326 395 466 247 310 375 443 235 294 357 421 217 272 329 389 212 266 322 381 194 243 295 348
SK 6060 331 415 502 593 306 384 465 549 305 383 464 548 275 344 417 493 282 353 428 505 254 319 386 456
SK 8060 377 473 572 676 369 463 561 663 363 456 552 652 339 426 516 609 358 449 544 642 320 401 486 574
SK 4080 328 411 498 588 317 398 482 569 290 364 440 520 274 344 417 492 259 325 394 465 243 304 369 435
SK 6080 381 478 579 684 379 476 577 681 362 455 551 650 345 433 524 619 341 428 519 612 314 393 477 563
SK 8080 435 546 661 781 425 533 646 763 412 517 626 739 400 502 608 718 404 507 614 725 386 484 586 692
SK 4010 386 484 586 692 373 468 567 669 341 428 518 612 322 405 491 579 305 382 464 547 286 358 434 512
SK 6010 448 562 681 805 446 560 679 801 426 535 648 765 406 509 616 728 401 504 611 720 369 462 561 662
SK 8010 512 642 778 919 500 627 760 898 485 608 736 869 471 591 715 845 475 596 722 853 454 569 689 814
SK1010 596 718 838 959 583 708 844 981 568 692 832 975 551 677 808 948 556 679 811 950 533 659 795 932
CONTINUED

Dissipated power
ArTu K - H=2000mm
SK 6025 216 270 328 387 189 237 287 338 205 257 312 368 176 221 268 316 199 250 303 358 170 213 258 305
SK 8025 273 343 415 490 239 299 362 428 265 332 402 475 225 283 343 404 261 327 396 467 220 276 334 395
6 SK 4040 209 262 317 375 192 241 292 345 191 240 291 343 172 216 262 309 178 223 270 319 157 197 239 282
SK 6040 271 340 412 486 246 309 374 442 255 320 388 458 225 282 342 404 243 305 369 436 211 265 321 379
SK 8040 328 411 498 588 303 380 460 543 322 404 490 578 280 352 426 503 310 389 471 557 268 337 408 481
SK 4050 244 306 371 438 228 287 347 410 221 278 337 397 202 254 307 363 202 254 308 363 182 228 277 327
SK 6050 305 383 464 548 287 361 437 516 290 364 442 521 260 342 395 466 272 342 414 459 241 302 366 432
SK 8050 358 448 543 641 339 404 515 609 346 406 527 622 319 400 485 573 339 425 515 608 303 380 461 544
SK 4060 279 351 425 501 265 333 403 476 252 316 383 452 232 292 353 417 227 285 346 408 207 260 315 372
SK 6060 340 426 517 610 329 413 500 590 326 409 496 585 295 402 448 528 302 379 459 542 271 339 411 485
SK 8060 388 486 589 695 376 472 571 675 371 466 565 667 358 449 544 643 368 462 559 660 338 424 514 607
SK 4080 354 444 537 634 341 428 519 612 314 394 478 564 295 370 448 529 278 349 423 499 258 324 393 464
SK 6080 393 493 597 705 387 486 589 695 370 464 562 664 363 455 552 651 361 453 549 648 332 416 504 595
SK 8080 456 572 693 818 440 552 668 789 427 536 649 766 410 515 624 736 415 521 631 745 401 503 610 720
SK 4010 416 522 632 746 401 504 611 720 369 464 562 664 347 435 527 622 327 411 498 587 304 381 462 546
SK 6010 462 580 702 829 455 572 693 818 435 546 661 781 427 535 649 766 425 533 646 762 391 489 593 700
SK 8010 536 673 815 962 518 649 786 928 502 631 764 901 482 606 734 866 488 613 742 876 472 592 718 847
SK1010 629 753 892 1045 611 748 892 1092 593 728 862 998 574 697 826 960 585 710 843 980 569 690 819 952

Handling Handling ArTu K structures by means of rollers: only with ZR…
Handling with transpallet reinforced plinth
100
A B C D A
6
For switchgear with reduced depth, the following type of handling
A B C D is recommended:
Dimensions (mm) (mm) (mm) (mm)
ArTu L
Fianco
Width 600mm 47 596 97 296
ArTu M
Width 600mm 125,5 469 251
Width 800mm 125,5 669 251
ArTu K
Width 400mm 125,5 259 251
Width 600mm 125,5 469 251
Width 800mm 125,5 669 251
Width 1000mm 125.5 869 251
Width 200mm (cable container) 125,5 251 69
Width 300mm (cable container) 125,5 251 169
150/300mm
For greater safety during transport using a fork-lift truck, it is In the case of structures W=1000mm (with internal or external
advisable to anchor the switchgear to the truck: cable container) containing busbar systems, check the centre of
gravity before handling.

Handling
Handling with overhead travelling crane
To handle using a crane or overhead travelling crane, check the following conditions before lifting the switchgear:
- excellent state of the ropes or chains;
- the angle between the lifting ropes and the switchgear roof must be ≥ 45°;
- the maximum number of columns transported is 3;
- ArTu L maximum weight lifted as per DIN 580 (M8);
- ArTu M - K maximum weight lifted as per DIN 580 (M12) Standard.
To respect the conditions described above, a lifting beam with appropriate characteristics can be used when there are several
columns side by side.
Do not lift the Artu L

structures by
6 hooking the ropes to
the connection box.
45° 45°
DIN 580 Standard regarding mechanical connection elements (only for lifting eyebolts)
Lifting eyebolts Lifting reinforcements
B C D E F G Load 1 Load 2 Tightening

A (mm) (mm) (mm) (mm) (mm) (mm) (kg) (kg) (Nm)
Lifting eyebolts
ArTu L M8 30 8 18 6 15 20 140 95 8*
ArTu M-K M12 54 12 28 10 22 30 340 240 8*
ArTu L M8 Ø20 30 60 28 Ø10 40 210 140 22
ArTu M-K M12 Ø40 37 80 25 Ø14 60 510 350 40
* Close by hand without mechanical elements in order to avoid overvoltage in the stem that will reduce the capacity of the lifting eyebolts

Electrical continuity of the structure and of the fixed and mobile parts
Electrical continuity in ArTu switchgear is guaranteed automatically In the case of mobile parts (e.g. front panels), electrical continuity
just with assembly of the structure without the use of dedicated is guaranteed in the closed position by the special shape of the
accessories. hinge (ABB patent) which is always supplied with the panels.
The blind door, side panels and rear panels are fitted with copper The special shape of the hinge allows connection even using a
M6captive screws. Panel earthing is obtained thanks to the fixing traditional copper braid.
screws.
Standard 61439-1
Part 8.4.2.2.2
Prescriptions for earth continuity for protection against the
consequences of a fault within the switchgear
b) For covers, doors, closing plates and similar, the ordinary
connections with metal screws and metal hinges are considered
sufficient for electrical continuity so long as electrical devices that
exceed the low voltage limits (ELV) are not installed on them.
90mm

Calculation of the PE protection conductor

The IEC 60439-1 Standard indicates the methods of calculation for the cross-section of the PE protection conductor which must be
suitably sized to withstand the thermal and dynamic components of the fault currents. In identifying the fixing position of the busbar,
check the following conditions:
- the busbar must be connected directly to the switchgear exposed conductive parts (structure);
- the busbar must be connected in an easily accessible position.
For sizing, use the values in the table, taken from the IEC 60439-1 Standard CEI EN60439-1, IEC 61439-1-2.
S (mm2) Sp (mm2)
S ≤ 16 S
16 < S ≤ 35 16
35 < S ≤ 400 S/2
400 < S ≤ 800 200
S ≤ 800 S/4
6 Wall-mounted ArTu L Wall-mounted ArTu M

Protection conductor section (25x4) 100mm2 Certified ACAE/LOVAG No. IT 11.078
(art. BR0400) with protection conductor section
(25x4)100 mm2 (art. BR0400)
Floor-mounted ArTu M
Certified ACAE-LOVAG IT 11.076 with protection
conductor section (25x4) 100mm2
Floor-mounted ArTu L
Protection conductor section (25x4) 100mm2
(art. BR0400)
The conductors must be The conductors must be

connected singly. connected singly.
ArTu K
Certified ACAE/LOVAG No. IT 11.079 with protection
conductor section (50x5) 250mm2 (art. BR6305)

Equipotentiality
The accessible conductive parts of a device, which cannot be connected to the protection circuit by their own means of connection,
must be connected to the protection circuit of the apparatus for equipotentiality of the protection by means of an equipotential
conductor, whose section must be selected according to the table given below.
Rated service current Minimum section of the equipotential protective conductor

Ie (A) (mm2)
Ie ≤ 20 S
20 < Ie ≤ 25 2,5
25 < Ie ≤ 32 4
32 < Ie ≤ 63 6
63 < Ie 10
S = section of the phase conductor (mm2)
PEN conductor 6
The section of the PEN conductors of the apparatus must be determined using the same procedure followed for the neutral
conductor (N). The minimum section of a copper conductor must be 10mm2.
The PEN conductor does not need to be insulated.
The parts of the structure must not be used as a PEN conductor.
However, the assembly tracks, made of copper or aluminium, can be used as PEN conductors.
For conductors not made of copper, the sections above are replaced with equivalent conductivity sections, which may require
larger sized terminals.

IP degrees of protection
1st NUMBER: protection against solid bodies 2nd NUMBER: protection against liquids
0 No protection 0 No protection
1 Protected against solid bodies larger 1 Protected against vertical fall of

than 50mm (accidental contact with drops of water (condensation)
hands)
2 Protected against solid bodies 2 Protected against drops of water up

larger than 12 mm (fingers) to 15° from vertical
6
3 Protected against solid bodies larger 3 Protected against drops of water up

than 2.5mm (tools, wires) to 60° from vertical
4 Protected against solid bodies 4 Protected against splashes of water

larger than 1 mm from all directions
5 Protected against dust 5 Protected against jets of water from

(no harmful deposit) all directions by means of a hose
6 Totally protected against dust 6 Protection against jets of water

similar to sea waves
1st number defined by the CEI EN 60529 – IEC 529 Standards 7 Protected against the effects of
temporary immersion
8 Protected against the effects of

continual immersion
2nd number defined by the CEI EN 60529 – IEC 529 Standards

IP degree of protection
Protection against penetration of solid bodies Protection against penetration of water
1st 2nd
characteristic Brief Complete characteristic Brief Complete
number description description number description description
0 Unprotected No particular protection 0 Unprotected No particular protection
1 Protected against No large surface of the human 1 Protected against The drops of water which fall
solid bodies lar- must be able to penetrate, vertical fall of drops vertically must not cause harmful
ger than 50mm for example a hand (voluntary of water effects
protection is not provided) or 2 Protected against The drops of water which fall
solid bodies larger than 50mm in drops of water up vertically must not cause harmful
diameter. to 15° from vertical effects when the housing is
leant at any angle up to 15°
2 Protected against Fingers or similar objects of length in relation to its normal
solid bodies lar- not exceeding 80mm or solid position
ger than 12mm 3 Protected against The water which falls like rain
bodies of diameter higher than 12 6
rain from a direction with an angle
mm must not penetrate
of up to 60° to vertical must
3 Protected against Tools, wires, etc. with diameter or not cause harmful effects
solid bodies lar- thickness greater than 2.5mm or 4 Protected against the Water splashed over the housing
ger than 2.5mm solid bodies with splashes of water from all directions must not
diameter greater than 2.5mm cause harmful effects
must not be not be able to
penetrate 5 Protected against jets Water sprayed with a nozzle
onto the housing from all
4 Protected against Wires or plates thicker than direction must not cause
solid bodies lar- 1.0mm or solid bodies with harmful effects
ger than 1.0mm diameter greater than 1.0mm
must not be able to penetrate 6 Protected against In the case of waves or
waves strong jets of water, the water
must not enter the housing in a
5 Protected against Penetration of dust is not totally
harmful amount
dust excluded, but the amount
penetrating is not enough to 7 Protected against the Water in a harmful amount must
harm correct operation of the effects of temporary not be able to penetrate inside
material immersion the housing immersed in certain
pressure and duration
6 Totally protected No penetration of dust is allowed conditions
against dust 8 Protected against the The material is suited to remai-
effects of continual ning immersed in water in
immersion
Degrees of protection which can be obtained with ArTu switchgear

ArTu K - IP41
ArTu L - IP31 ArTu L - IP41 ArTu M/K - IP31 ArTu K - IP41 ArTu K - IP65
With door and side
Without door With door Without door Without door with IP41 With door and blind
ventilated panels
kit and side ventilated panels
panels

IK mechanical resistance
The IK degree is expressed in Joules in compliance with Standard IEC 62262.
IK 0 Unprotected IK 06 0,25 kg
Impact energy in
Joule 1,00
400mm
IK 01 0,25 kg
Impact energy in IK 07 Impact energy in
56mm
Joule 0,140 0,50 kg Joule 2,00
400mm
6
IK 02 0,25 kg
Impact energy in IK 08 1,7 kg
ArTu L
80mm
Joule 0,200 Impact energy in

300mm
Joule 5,00
IK 03 0,25 kg
Impact energy in IK 09 5 kg
ArTu M - K
Joule 0,350
140mm
Impact energy in
200mm
Joule 10,00
IK 04 0,25 kg
Impact energy in IK 10 5 kg ArTu M - K
Joule 0,500
200mm
400mm
Impact energy in
Joule 20,00
IK 05 0,25 kg
Impact energy in
280mm
Joule 0,700

Busbars with shaped section and flat bars
Mechanical and electrical characteristics
Compliance with CEI EN 60439-2/IEC 61439-1-2 Standard
The ArTu switchgear has undergone the type tests foreseen by the CEI EN 60439-2/IEC 61439-1-2 Standards in the ABB laboratories.
The results of these tests guarantee the performances of the ArTu switchgear and, by using the ABB SACE metalwork structures
and accessories, such as the modular and moulded-case circuit-breakers, allow the end switchgear constructor not to carry out any
further type tests by following the selection criteria and the assembly instructions for the various components, and only carrying out the
individual tests foreseen under the CEI EN 60439/IEC 61439-1-2 Standard. These results, which are indicated below, can be referred
to for making out the declaration of conformity of the switchgear.
Components Material
Busbars electrolytic copper 99.9% CU-ETP
Busbar holders self-extinguishing thermoplastic VO
Tightening screws Mad. class 8.8
6
Busbar Code Length IP 31 IP 41/43 IP 65 Icw IpK Dimensions Section Weight
(mm) (kA) (kA) (mm) (mm2) (Kg)
In 400 BA0400 1730 630 520 400 35 74 20x20 200 4
In 800 BA0800 1730 970 830 800 35 74 20x20 283 4.4
In 1250 BA1250 1730 1400 1330 1250 75 165 20x60 603 9.3
In 1600 BA1600 1730 1820 1710 1600 75 165 20x60 703 10
In 2000 BA2000 1730 2350 2200 2000 100 220 25x60 1000 14,8
Tightening torque Screws M6 - 10N.m
Screws M8 - 20N.m
Screws M10 - 30N.m
Flat busbar
Busbar Code Length IP 31 IP 41 IP 65 Icw IpK Dimensions Section Weight
(mm) (kA) (kA) (mm) (mm2) (Kg)
In 250 BR0250 1750 280 275 250 15x5 0,7
In 400 BR0400 1750 530 480 400 25x5 1,3
In 400 BR4005 1750 610 575 500 35 32x5 2,1
In 630 BR0630 1750 772 695 630 30x10 3,1
In 630 BR6305 1750 850 780 715 50 50x5 3,4
In 800 BR8005 1750 951 863 800 50 63x5 4,4
In 1250 BR1250 1750 1431 1347 1250 50 100x5 2,25
In 1600 BR1600 1750 1836 1710 1600 105 100x10 14,5
In 2000 BR2000 1750 2250 2110 2000 105 120x10 18,7
In 2500 BR1600 1750 3056 2700 2500 105 100x10 29
In 3000 BR2000 1750 3500 3200 3000 105 120x10 37,4
In 3200 BR1600 1750 4018 3600 3200 105 100x10 43,5
In 4000 BR2000 1750 4460 4250 4080 105 120x10 56,1
In 5000 BR2500 1750 5280 5000 NO 105 160x10 75
In 6300 BR2010 1750 6300 6000 NO 105 200x10 93,5
Tightening torque Screws M6 - 10N.m
Screws M8 - 20N.m
Screws M10 - 30N.m


Busbar holders for busbars with shaped section up to 100 kA
Busbar
400A 800A 1250A
Type Icc (kA) Code BA0400 BA0800 BA1250
Scaled 35 PB0802 L1-L2-L3 3x BA0400 3x BA0800
Neutral 100% 1x BA0400 1x BA0800
Neutral reduced 1x BA0400
Linear 35 PB0803 L1-L2-L3 3x BA0400 3x BA0800
Neutral 100% 1x BA0400 1x BA0800
Neutral reduced 1x BA0400
6 Scaled 75 PB1600(1) L1-L2-L3 3x BA1250
Neutral 100% 1x BA1250
Neutral reduced
Linear 65 PB1603(1) L1-L2-L3 3x BA1250
Neutral reduced
Linear 75 PB1601(1) L1-L2-L3 3x BA1250
Neutral reduced
(1)
Linear 100 PB3201 L1-L2-L3
Neutral 100%
Neutral reduced
(1)
It is possible to mount the 400/800A busbars with the special adapter AD1066 see example on page 5/88.
Example of use of adapter Example of use of 2 busbars Example of use of the busbar
for busbars per phase (3200A) with reduced neutral
N
L1
L2
AD1066 L3
PB3201
PB1601
In=3200A In=1250A
2xBA2000 BA1250
In=800A
BA0800
In=1600A
BA1600

Application
ArTu L ArTu M ArTu K
1600A 3200A Cable cont. Cable Cable
BA1600 BA2000 Structure Drawer Structure container Structure container

3x BA1600 6
1x BA1600 D≥700mm D≥700mm
1x BA1250
3x BA1600
1x BA1600 D≥500mm D≥300mm
1x BA1250[
3x BA1600
1x BA1600 D≥500mm D≥500mm
1x BA1250
6x BA2000
2x BA2000 D≥700mm D≥700mm
1x BA2000


Components
AD1067
AD1063
AD1078
PB1601 PB1601
6
The busbar holders can be used both Branch between 3200A busbars with Branch between 3200A flat busbars
in intermediate and end positions, shaped section and 1250/1600A and 1250/1600A busbars with shaped
thanks to the special support. busbars with shaped section. section.
BF....
BA1600
BA2000
AD1069
AD1056
BF8002
BA1250
The connections can be made on Joint for 1250-1600-2000A busbars. Direct branch by means of cable
each side of the busbar. Example of “T” or “L” coupling. terminal for cable section up to 50mm2.

AD.... BA1250
ED2209
TV....
AD1064
AD1071
AD1072
6
Snap-on assembly between busbar Direct connection with Unifix H A self-locking hammer screw allows
holders and assembly crosspieces. system. fixing between conductors in any
position along the busbar, ensuring a
large contact surface.
Note
branches headed with cable terminal
AD1077 with the following dimensions:
Cable C
section
mm2 A B C D A
16 9 13 6 32 M8
D
25 10,5 13 7 35 9
35 14 17 9 41 8
70 15 20 10 42 B
Branch by means of accessory.

Flat busbars
Busbar holders for flat busbars up to 32 kA
Busbars Application
250A 400A 630A Cable cont.
Type Icc (kA) Code BR0250 BR0400 BR0630 Structure Box
Scaled 23 BP0634 L1-L2-L3 3xBR0250 3xBR0400 3xBR0630
Neutral 1xBR0250 1xBR0400 1xBR0630
100%
Linear 32 BP0630 L1-L2-L3 3xBR0250 3xBR0400 3xBR0630

Neutral 1xBR0250 1xBR0400 1xBR0630

100%
6
Busbar holders for flat busbars up to 105 kA
Busbars Application
400A 630A 800A 1250A 1600A ArTu K
Type Icc (kA) Code BR4005 BR6305 BR8005 BR1250 BR1600 structure/cable cont.
Linear 50 BP1250 L1-L2-L3 3xBR4005 3xBR6305 3xBR8005 3xBR1250
Neutral 1xBR4005 1xBR6305 1xBR8005 1xBR1250
D≥500
100%
Linear 75 BP1600 L1-L2-L3 3xBR1600

Neutral 1xBR1600
D≥500
100%

Neutral 2xBR1600
D≥700
100%

Neutral 3xBR1600
D≥700
100%

Neutral 3xBR2000
D≥900
100%

Neutral 3xBR2500
D≥900
100%

Neutral 3xBR2010
D≥900
100%

Flat busbars
Components
AD1063
BS....
BR ....
BP1601
TR....
The 25mm pitch drilling allows Branch between pre-drilled 3200A flat Branch between flat busbar and 6
branching between flat busbars at busbars and 1250/1600A busbars with flexible busbar by means of tightening
any point.. shaped section (only with PB1601). plate.
BR...
N N
16x5 max
N
L1
N L2
L3
BP... AD1081
AD1081
Busbar holder for flat busbars (one Single-phase divider with possibility Single-phase dividers up to 400A,
busbar per phase). of connection, which can be mounted which can be mounted on DIN rail.
on DIN rail.
AD1034
AD1063
Four-pole 250A divider.

Examples of connections - Unifix H

Unifix H frame with 400A 24 and 36 module busbars
Busbar power supply from the top by means of 4P feeder Busbar power supply from the top by means of main row
module placed laterally circuitbreaker
ED2531 ED2549 ED2556
In = 320A max ED2191
ED2549 ED2531 ED2564
ED2209 ED2191
ED2556
N N
ED2845 ED2564
L1 L1
T T
L2 L2
L3 N N L3
N N
L1 L1
T T T
L2 L2
N N N
L3 L3
N N
L1 L1
T
L2 L2
6 L3 N L3
Busbar power supply from the bottom by means of 4P feeder Busbar power supply from the bottom by means of main row
module placed laterally circuit-breaker
ED2531 ED2531 ED2531
ED2549 ED2549 In = 400A max ED2549
ED2191 ED2556 ED2191
ED2556 ED2556
ED2564
ED2564 ED2564
ED2845
N N N N
on
L1 L1 L1 L1
T T TEST
T T T
TEST
L2 L2 L2 L2
N N N N N
L3 L3 L3 L3
Busbar power supply from the top by means of 4P feeder module Covers for IP 20 degree of protection
placed centrally
ED2531 ED2407
In = 400A max ED2549
ED2191
ED2556
N N
ED2564
L1 L1
T
L2 L2
L3 N L3
N N
on
L1 L1
TEST
T T T
TEST
L2 L2
ED2407
N N N
L3 L3

Examples of connections - Unifix L
Unifix L frame with 100A 12/18/24 module busbars
Two different single-phase circuits on a single 24 module DIN rail Busbar power supply by means of power supply terminals
placed centrally
ED3104
ED3103
In 100 A max
ED3102
ED3082
ED2993 ED2993 ED3101
T T
T
N N
N
Example of main and shunted power supply Busbar power supply by means of power supply terminals
placed laterally
ED3104
ED2969
ED3103
ED3102
In = 80 A max
ED3101
T T T
N N N
ED3082
ED3132 ED2944
(L=350mm)
ED2993
T T T T
N N N N
Busbar power supply by means of cable terminal placed under Direct busbar power supply by means of feeder module
the head of the circuit-breaker terminal and branch with parallel (supplied without cables) and branch by means of feeder module
module
In = 100 A max ED3101 ED2969
ED3405
(L=400mm) ED3102
ED3103
ED3104 T T T T T
N N N N N
ED3132
(L=350mm) ED2969
T T T T
N N N N

Examples of ArTu segregation
Form 1 Form 2 Form 3 Form 4

(no internal segregation) (segregation of the busbars (separation of the busbars (separation of the busbars
from the functional units) from the functional units + from the functional units +
separation of the functional separation of the functional
Form 2a units from each other) units from each other +
Terminals not separated from separation of the terminals
the busbar Form 3a from each other)
Terminals not separated from
Form 2b the busbar Form 4a
Terminals separated from the Terminals in the same the
busbar Form 3b associated functional unit
Terminals separated from the
busbar Form 4b
Terminas not in the same the
associated functional unit

Standardised RAL colours (on request)
On request, colours other than the standard RAL 7035 orange peel one are available, using the same painting cycle (for other types
of colours or paints, please contact ABB).
Beige Ivory Green
RAL 1013 RAL 1015 RAL 1014 RAL 6027 RAL 6019 RAL 6021 RAL 6011
Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p.
6
Orange Red Blue
RAL 2002 RAL 2004 RAL 3000 RAL 5012 RAL 5015 RAL 5010 RAL 5009
Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p.
White Black Grey
RAL 9010 RAL 9001 RAL 9002 RAL 9005 RAL 7032 RAL 7001 RAL 7031 RAL 7030 RAL 7035 RAL 7012
Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p. Smooth Orange p.

Overall dimensions
Gemini 7/2
ArTu L Structures 7/6
ArTu M 7/10
ArTu K 7/14
ArTu L - M - K - Kit for apparatus 7/20
ArTu L - M - K - Distribution systems 7/23
ArTu L - M - K - Accessories 8/26

Overall dimensions
Gemini
Structures
Front view Side view Top view Installation with brackets
A G
= C = H
=
30
=
30
30
G
H
D
D
B
B
F
C
=
=
= E = I
L
Size Code A B C D E F G H I L
1 1SL0201A00-1SL0211A00-1SL0221A00 335 400 250 300 150 180 263 463 195 395
2 1SL0202A00-1SL0212A00-1SL0222A00 460 550 375 450 250 270 412 612 320 520
7
3 1SL0203A00-1SL0213A00-1SL0223A00 460 700 375 600 270 475 560 760 320 520
4 1SL0204A00-1SL0214A00-1SL0224A00 590 700 500 600 286 385 562 762 445 645
5 1SL0205A00-1SL0215A00-1SL0225A00 590 855 500 750 390 558 713 913 445 645
6 1SL0206A00-1SL0216A00-1SL0226A00 840 1005 750 900 640 706 863 1063 695 895
Uprights Front opaque and transparent doors

28
Duct Duct
h b
A
B
A B
Duct
Size Code A B b h Size Code A B
1 1SL0283A00 132 300 18 46 1 1SL0241A00-1SL0231A00 349 325
2 1SL0284A00 152 450 27 46 2 1SL0242A00-1SL0232A00 499 450
3 1SL0285A00 152 600 27 46 3 1SL0243A00-1SL0233A00 649 450
4 1SL0285A00 152 600 27 46 4 1SL0244A00-1SL0234A00 649 575
5 1SL0286A00 152 750 36 46 5 1SL0245A00-1SL0235A00 799 575
6 1SL0287A00 152 900 55 46 6 1SL0246A00-1SL0236A00 949 825
> The measurements are in millimetres

Base plates Inner doors
2 metal plates
A 5 insulating plates A 38
Base plate Inner door

Inner door Panel
B
B
D 63 D
C
Size Code A B C D Size Code A B C D
1 1SL0259A00-1SL0275A00-1SL0267A00 235 285 33.5÷110 16.3÷91 1 1SL0251A00 250 300 3 128
2 1SL0260A00-1SL0276A00-1SL0268A00 360 435 33.5÷139 36.4÷140 2 1SL0252A00 375 450 4 177
3 1SL0261A00-1SL0277A00-1SL0269A00 360 585 33.5÷139 36.4÷140 3 1SL0253A00 375 600 4 177
4 1SL0262A00-1SL0278A00-1SL0270A00 485 585 33.5÷139 36.4÷140 4 1SL0254A00 500 600 4 177 7
5 1SL0263A00-1SL0279A00-1SL0271A00 485 735 33.5÷228 47÷244 5 1SL0255A00 500 750 5 277
6 1SL0264A00-1SL0280A00-1SL0272A00 735 885 33.5÷228 47÷244 6 1SL0256A00 750 900 5 277
DIN rail
35
22,5 A
d= d= d= d= d= d=
Size Code A pos. 1 pos. 2 pos. 3 pos. 4 pos. 5 pos. 6
1 1SL0290A00 210 51 63,5 76 88,5 - - d
2 1SL0291A00 318 51 63,5 76 88,5 101 113,5
3 1SL0291A00 318 51 63,5 76 88,5 101 113,5
4 1SL0292A00 443 51 63,5 76 88,5 101 113,5
5 1SL0292A00 443 51 63,5 76 88,5 101 113,5
6 1SL0293A00 663 51 63,5 76 88,5 101 113,5
The distances of the DIN rail from the panel depend on the depth at which the DIN rail is regulated
by using fixing devices.
Panels for modular apparatus mounted on DIN rail

1 + 1/2 module 1 module
C
p f
B
C
B
A 19
A 19
1 mod. 1+1/2 mod. DIN

Size Code A B A B C modules p f
1 1SL0307A00 250 150 - - 46 12 44 145
2 1SL0308A00-1SL0313A00 375 150 375 225 46 18 44 197
3 1SL0308A00-1SL0313A00 375 150 375 225 46 18 44 197
4 1SL0309A00-1SL0314A00 500 150 500 225 46 24 44 197
5 1SL0309A00-1SL0314A00 500 150 500 225 46 24 44 297
6 1SL0310A00-1SL0315A00 750 150 750 225 46 36 44 297

Overall dimensions
Gemini
Blank panels
B
f
p
A 19
1/2 mod. 1 mod. 2 mod.

Size Code A B A B A B p f
1 1SL0318A00-1SL0324A00-1SL0330A00 250 75 250 150 250 300 26,5 162
2 1SL0319A00-1SL0325A00-1SL0331A00 375 75 375 150 375 300 26,5 214
3 1SL0319A00-1SL0325A00-1SL0331A00 375 75 375 150 375 300 26,5 214
4 1SL0320A00-1SL0326A00-1SL0332A00 500 75 500 150 500 300 26,5 214
5 1SL0320A00-1SL0326A00-1SL0232A00 500 75 500 150 500 300 26,5 314
6 1SL0321A00-1SL0327A00-1SL0233A00 750 75 750 150 750 300 26,5 314
Modular plates Mounting distances between front panel and plate

DIN panel Blank panel
12,5 2,2 12,5
B
7
A 2
73,7 73,7
1 mod. 2 mod.
Size Code A B A B
1 1SL0296A00 210 130 19 54,7 71,5
2 1SL0297A00-1SL0302A00 318 130 318 280 67,2 84
3 1SL0297A00-1SL0302A00 318 130 318 280 79,7 96,5
4 1SL0298A00-1SL0303A00 443 130 443 280 92,2 109
5 1SL0298A00-1SL0303A00 443 130 443 280 104,7 121,5
6 1SL0299A00-1SL0304A00 663 130 663 280 117,2 134
Kit for Tmax

Panel 46
150
300
B
A 19
Plate
D
Panel Plate
1 mod. 2 mod. 1 mod. 2 mod.
Size Code A B A B Size Code C D C D
2 1SL0336A00-1SL0370A00 375 150 375 300 1 1SL0296A00 210 130
3 1SL0336A00-1SL0370A00 375 150 375 300 2 1SL0297A00-1SL0302A00 318 130 318 280
4 1SL0337A00-1SL0371A00 500 150 500 300 3 1SL0297A00-1SL0302A00 318 130 318 280
5 1SL0337A00-1SL0371A00 500 150 500 300 4 1SL0298A00-1SL0303A00 443 130 443 280
6 1SL0338A00-1SL0372A00 750 150 750 300 5 1SL0298A00-1SL0303A00 443 130 443 280
6 1SL0299A00-1SL0304A00 663 130 663 280

Wiring kit
Duct 25x60 mm
60
31 14
25 A
Size A
1 210
Duct 40x60 mm 2 318
3 318
60
46 14
4 443
5 443
40 6 663
A
Ventilation kit Anti-condensation kit Pedestal

50
7
130
Ø25
130 23
800
104,5
11
5 Ø 4,5x4
104,5 55
305 165
Pole installation kit

60
B
A
30
25
Size A B
1 232 206
2-3 358 332
4-5 483 457
6 733 707

Overall dimensions
ArTu L structures
Wall-mounted ArTu L
Front structure Front of cable container Side
690 390 204

560 310
484 260
Code A B
Structure
A B A B
SL0600 600 650
SL0800 800 850
SL1000 1000 1050
SL1200 1200 1250
Cable container
7 VC0600 600 650
VC0800 800 850
VC1000 1000 1050
VC1200 1200 1250
Base of structure Base of cable container

540 160
84.5 84.5
75.5 90

Wall-mounted ArTu L
Fixing to wall
C 667,5 367,5
35 35
Code C D
Structure
SL0600 645 700
D D
SL0800 645 900
SL1000 645 1100
SL1200 645 1300
Cable container
VC0600 345 700
VC0800 345 900
VC1000 345 1100 7
VC1400 345 1300
90
Useful space inside wall-mounted switchgear

Structure Cable container
76 52 Tmax T-XT
84 Pro M
154
119 BP0630
144 PB0803
51 BP0634
29 74 PB0802

Overall dimensions
ArTu L structures
Floor mounted ArTu L

Front of structure Front of structure with internal cable Front of external cable Side
container container
690/890 890 390 240
560/760 563 310 112
484/684 484 247 260
147
VC1425
VC1625 LF....
VC1825
VC2025
A B 36 Modules A B A B
24 Modules
7
MC....
100 100 100
Base of structure Base of cable container

540/740 Structure 160 External cable container
Code A B Code A B
84.5 103.5
SL1400 - SL1408 1400 1450 VC1400 1400 1450
75.5 90
SL1600 - SL1608 1600 1650 VC1600 1600 1650
SL1800 - SL1808 1800 1850 VC1800 1800 1850
SL2000 - SL2008 2000 2050 VC2000 2000 2050
Cable connection box Blind base plates

Front view Side view 516
C 235.4 15.5 = = 10
D 192.8
310 341
338.5 384.5
15.5 216 10
Top view Code C D E
E
Connection box for structure
RC1000 690 644 550 310 341
132.5
Connection box for cable container
RC2000 390 344 250

Floor-mounted ArTu L
Fixing to wall/floor Glazed door Blind door
F 667.5/867.5 367.5 24 mod. DIN + 24 mod.DIN
int.cable container
384.5 384.5
887 694
35 35 452
G G
I I
H 90 514
42.5 22 22
152
30.5
Structures External cable container
Code F G H I Code F G H
SL1400 645 1575 645 VC1400 345 1575 345
SL1600 645 1775 645 VC1600 345 1775 345
SL1800 645 1975 645 VC1800 345 1975 345
SL2000 645 2175 645 VC2000 345 2175 345
SL1408 845 1575 845 1444
SL1608 845 1775 845 1644
SL1808 845 1975 845 1844
SL2008 845 2175 845 2044
Useful space inside floor-mounted switchgear

Structure Cable container Connection box
185 BP0630
162 PB0803
129 BP0634
106 PB0802
108 86 Tmax T -XT

Tmax T-XT 118 Pro M
154 BP0630 189 129 BP0630

180 PB0803 149 PB0803
62 BP0634
80 PB0802
29

Overall dimensions
ArTu M structures
Wall-mounted ArTu M
Structure Blind or transparent front door
Front Side
700 150
200 694
600 35 35
A B E
90
25
Top
C
A B C D E
7
150 Depth 150mm
D
200 SM6061 700 600 183 60 640
SM8061 900 800 183 60 840
556
Depth 200mm
SM8062 900 800 320 70 840
SM1062 1100 1000 320 70 1040
SM1262 1300 1200 320 70 1240
Switchgear for operating theatre SM 1069

Front Side
700
200
600
PV 4060
1123
1100
1000
1029
1151
PO 6069
629
751
Top
130
69
130
200
556

Wall-mounted ArTu M
Fixing to wall
734
660
F G
Depth 150mm
SM6061 734 661
SM8061 934 861
Depth 200mm
SM8062 934 861
F G SM1062 1134 1061
SM1262 1334 1261
Embedded installation
Front Totally embedded Semi-embedded 7
822 150 150
710 136 80 70
46
822-1022-1222-1422
792-992-1192-1392
700-900-1100-1300
46
185 80 120
200 200
Useful space inside wall-mounted switchgear

Depth 150m Depth 200mm
99 System Pro M
49 System Pro M 67 Tmax T-XT
17 Tmax T1-T2-XT1-XT3
171
121
23
23

Overall dimensions
ArTu M structures
Front Side Blind or transparent front doors
694
696 896 250 894 894
35 35
600 800 157
55
123
36 Modules
24 Modules
241,5
A B A B E D D
55
100 100 90 90 90 514
Top/Base 22 22
70 57 70 250
320 180 320 180
Side panel Additional cable container

396 Externasl door
219 (front/rear)
300
394
A B C D E
Structures without cable container
SM1462 1496 1400 1490 1436
SM1662 1696 1600 1690 1636
SM1862 1896 1800 1890 1836
SM2062 2096 2000 2090 2036
Structures with cable container
SM1682 1696 1600 1690 1636 157
C A B 1636 SM1882 1896 1800 1890 1836 157
1836
2036 SM2082 2096 2000 2090 2036 157
VC1632 1696 1600
VC1832 1896 1800
VC2032 2096 2000
Overall dimensions for several

structures side by side
W x N + 28 = Xmm
100 W = Column width
N = Number of columns
14 18 28 = Overall dimensions 2 side panel

Fixing to wall/floor
606
806
7
Ø13mm
522
722
162,5
Useful space inside floor-mounted switchgear

F G H I
System Pro M 72 129,5 120 max 81
Tmax T1-T2 78 108
Tmax XT1-XT3 74 112
Tmax XT2-XT4 86 124
Structure Cable container
I
G
128 BP0630 150 BP0630

165 PB0803
H
F 95 PB0802
40

Overall dimensions
ArTu K structures
ArTu K
Structure without Structure with
cable container cable container
Front Side D ≤300mm Side D ≥500mm
510/637*/720/837*
920/1037*/1120 920/1020/1120 C2 C2
390/600/800/1000 800/1000 C1 C1
Closed frame
for segregated
switchgear
305
505
705
Reduced
A B 157 557/757 frame
347/557/757/957
Open frame
7
36/48 Modules 275
75 475
150 675
24/36 Mod. 226
74 223
100
A B C1 C2
Structure height 1600mm B
SK6025/SK8025 1731 1600 150 270
Structure height 1800mm
SK6025/SK8025 1931 1800 150 270
SK4040/SK6040/SK8040 1931 1800 225 345
SK4050/SK6050/SK8050 1931 1800 300 420
SK4060/SK6060/SK8060/SK6600* 1931 1800 500 620
SK4080/SK6080/SK8080/SK8800* 1931 1800 700 820
SK4010/SK6010/SK8010 1931 1800 900 1020
SK1010 1931 1800 1020
Structure height 2000mm
SK6025/SK8025 2131 2000 150 270
SK4040/SK6040/SK8040 2131 2000 225 345
Overall dimensions for several
SK4050/SK6050/SK8050 2131 2000 300 420
structures side by side
SK4060/SK6060/SK8060/SK6600* 620
2131 2000 500
W x N + 28 = Xmm
SK4080/SK6080/SK8080/SK8800* 2131 2000 700 820
W = Column width
SK4010/SK6010/SK8010 2131 2000 900 1020
N = Number of columns
SK1010 2131 2000 1020 28 = Overall dimensions 2 side panels
* Angled structures

ArTu K
Bases
SK6025 (W600xD150) SK4040 (W390xD225)
SK8025 (W800xD150) SK6040 (W600xD225)
VC3025 (W300xD150) VC3040 (W300xD225) SK8040 (W800xD225)
= 90 115 340 115 90 =

= = = D =
F
86,5
E =
E
F 160 76,5
D =
76,5
SK8060 (W800xD500) VC3060 (W300xD500) SK4060 (W390xD500) SK6060 (W600xD500)

VC3080 (W300xD700) SK4080 (W390xD700) SK6080 (W600xD700) SK8080 (W800xD700)
= 75,5 128,5 137 58 137 128,5 75,5 = = = = = = 200 70 200 = = 75,5 128,5 137 58 137 128,5 75,5 =
D D
104 E E E
142 102,5 102,5
137 7
200 200
F F
340 F
540 120
137
= 400 = 190
176
260
155,5
SK4010 (W390xD900)
SK6010 (W600xD900)
SK8010 (W800xD900)
VC3010 (w300xD900) SK1010 (W1000xD900)
= = 169,5 1117 169,5
D
126,5 D E F
112
SK6025 (W600xD150) 320 140 70
374 SK8025 (W800xD150) 320 140 70

SK4040 (W390xD255) 200 108 137
778 SK4050 (W390xD300) 320 94,5 235
66
SK4060 (W390xD500) 320 99 420
SK4080 (W390xD700) 320 99 620
374 SK4010 (W390xD900) 270 125 780
SK6040 (W600xD225) 540 123,5 70
115,5 112 SK6050 (W600xD300) 530 94,5 235

SK6060 (W600xD500) 93 163
SK6080 (W600xD700) 123 333
SK6010 (W600xD900) 467 125 780
SK8050 (W800xD900) 730 94,5 235
SK8010 (W800xD300) 467 125 780
50
VC3025 (W300xD150) 180 140 57
VC3040 (W300xD225) 200 103 137
VC3050 (W300xD300) 230 99 235
VC3060 (W300xD500) 230 99 420
VC3080 (W300xD700) 230 99 620
VC3010 (W390xD900) 200

Overall dimensions
ArTu K structures
ArTu K
Transparent front doors Side door Side door
507/717
917/1117 507/717/917/1117 318/393
917/1117 593/793
35 35
55
1671 1671 1671 1671

1871 1871 1871 1871
2071 2071 2071 2071
55
7
90 90 90 537/737
18 18 18 18
82 82
Blind side or ventilated panels Rear panels

593/793/993 ventilated 417 cable container
318/593 blind 507/717/917/1117
793/993
150
300
500
1671 1671
1871 1871
2071 2071
Ventilation area air inlet side

(valid for a single panel)
D (mm) cm 2
500 75
700 113
900 170
18 18

ArTu K
Fixing to wall/floor Structure
Dimensions Code A A1 B B1 C
L600xP150 SK6025 546 720 189 287 620
C L800xP150 SK8025 746 920 189 287 820
L390xP225 SK4040 336 510 264 362 410
L390xP300 SK4050 336 510 339 437 410
L390xP500 SK4060 336 510 539 637 410
L390xP700 SK4080 336 510 739 837 410
L390xP900 SK4010 336 510 939 1037 410
L600xP225 SK6040 546 720 264 362 620
L600xP300 SK6050 546 720 339 437 620
L600xP500 SK6060 546 720 539 637 620
L600xP700 SK6080 546 720 739 837 620
Ø13mm L600xP900 SK6010 546 720 939 1037 620
L800xP225 SK8040 746 920 264 362 820
L800xP300 SK8050 746 920 339 437 820
L800xP500 SK8060 746 920 539 637 820
L800xP700 SK8080 746 920 739 837 820
L800xP900 SK8010 746 920 939 1037 820
L1000xP900 SK1010 946 1120 939 1037 1020
Additional cable container 7

Code W (mm) A D (mm) B
ZR3000 420 320 287 170
ZR4000 510 410 362 245
ZR6000 720 620 437 320
ZR8000 920 820 637 520
B A
1
A1 837 720
B
1037 920
Additional cable container External door

Front Side
(front/rear)
F H L
G

Dimensions Code D E F G H I L
H=1600mm
L300xP150 VC3025 1731 1600 420 300 150 1671 417
H=1800mm
L300xP150 VC3025 1931 1800 420 300 150 1871 417
L300xP225 VC3040 1931 1800 420 300 225 1871 417
L300xP300 VC3050 1931 1800 420 300 300 1871 417
D E I L300xP500 VC3060 1931 1800 420 300 500 1871 417
L300xP700 VC3080 1931 1800 420 300 700 1871 417
L300xP900 VC3010 1931 1800 420 300 900 1871 417
H=2000mm
L300xP150 VC3025 2131 2000 420 300 150 1871 417
L300xP225 VC3040 2131 2000 420 300 225 1871 417
L300xP300 VC3050 2131 2000 420 300 300 1871 417
L300xP500 VC3060 2131 2000 420 300 500 1871 417
L300xP700 VC3080 2131 2000 420 300 700 1871 417
L300xP900 VC3010 2131 2000 420 300 900 1871 417
100
18

Overall dimensions
ArTu K structures
ArTu K
Useful space inside the switchgear
Depth 150mm Depth 225/300mm
B D
USEFUL SPACE FOR BARS
USEFUL SPACE FOR BARS
A
C
50
50
7
FIXED PLUG-IN WITHDR. FIXED PLUG-IN WITHDR.
A B A B A B C D C D C D
T1-T2-T3 78 146 - - - - Depth 225mm
T4-T5-T6 107 117 - - - - T1-T2-T3 78 221 149 150 - -

XT1-XT3 74 150 - - - - T4-T5-T6 107 192 157 142 190 109
XT2-XT4 86 138 - - - - XT1-XT3 74 225 124 175 - -
XT2-XT4 86 213 136 163 170 129
Depth 300mm
T1-T2 78 296 149 225 - -

T4-T5-T6 107 267 157 217 190 184
XT1-XT3 74 300 124 250 - -
XT2-XT4 86 288 136 238 170 204

ArTu K
Useful space inside the switchgear
Depth 500mm Depth 700/900mm
F H
USEFUL SPACE FOR BARS USEFUL SPACE FOR BARS
E G
50
50
7
FIXED PLUG-IN WITHDR. FIXED PLUG-IN WITHDR.
E F E F E F G H G H G H
T1-T2-T3 78 493 149 425 - - Depth 700mm
T4-T5-T6 107 467 157 417 190 384 T1-T2-T3 78 696 149 625 - -
T7-X 1 146 428 - - 251 323 T4-T5-T6 107 667 157 617 190 584
XT1-XT3 74 500 124 450 - - T7-X 1 146 628 - - 251 523
XT2-XT4 86 488 136 438 170 404 E1-E2-E3-E4 266 508 - - 378 396
XT1-XT3 74 700 124 650 - -
XT2-XT4 86 688 136 638 170 604
Depth 900mm
T1-T2 78 896 149 825 - -
T4-T5-S6 107 867 157 817 190 784
T7-X 1 146 828 - - 251 723
E1-E2-E3-E4-E6 266 708 - - 378 596
XT1-XT3 74 900 124 850 - -

XT2-XT4 86 888 136 838 170 804

Overall dimensions
ArTu L-M-K structures
Kit for apparatus

Panels for apparatus mounted on DIN rail
1 DIN row 2 DIN rows 3 DIN rows

W=390mm (12 DIN mod.) W=600mm (48 DIN mod.) W=600mm (72 mod.DIN)
W=600mm (24 DIN mod.) W=800mm (72 DIN mod.)
W=800mm (36 DIN mod.)
W=1000mm (48 DIN mod.)
Width 390mm Width 600/800mm Width 600mm
= 74,5 99,5
7 199
= 150 299
200
216 74,5
386 599
Width 600/800mm 432/634

200
596/796
=
149
= 99,5
432/634 432
596/796
596
Width 600/800/1000mm
=
199
=
432/634/845
596/796/996
Version for Tmax with diff. mod.
99.5
299
199.5
432/634/845
596/796/996
Version for Unifix H
=
299
=
432/634
596/796

Kit for apparatus
Blind flat plates - PF
Useful dimensions
B B
B
A A
A
ArTu L ArTu M-K d=150m ArTu K without segregation

H functional W=600mm W=800mm W=600mm W=800mm W=390mm W=600mm W=800mm W=1000mm
(mm) A B A B A B A B A B A B A B A B
200 175 440 175 592 184 449 184 649 184 284 184 440 184 650 184 850
300 275 440 275 592 - - - - 284 284 284 440 284 650 284 850
400 375 440 375 592 384 449 384 649 384 284 384 440 384 650 384 850
600 575 440 575 592 - - - - 584 284 584 440 584 650 584 850
800 775 440 775 592 - - - - - - - - - - 775 850
B .5
78 7
39
8
ø4
ArTu K segregated
H functional W=390mm W=600mm W=800mm W=1000mm
(mm) A B A B A B A B
200 190 374 190 584 190 784 190 984
300 290 374 290 584 290 784 290 984
400 390 374 390 584 390 784 390 984
600 590 374 590 584 590 784 590 984
800 - - 790 584 790 784 - -
Blind recessed plates - FR

Useful dimensions
ArTu M-K d=150m ArTu K without segregation

H functional W=600mm W=800mm W=600mm W=800mm
(mm) A B A B A B A B
200 191 426 191 626 180 526 180 726
400 391 426 391 626 257 526 257 726
600 - - - - 400 526 400 726

Overall dimensions
Kit for apparatus

ArTu L-M-K ArTu L-M-K ArTu L-M-K
Blind and ventilated panels Panels for instruments Blind and recessed panels
68
68 199 195 199

H
A
596/796/996 596/796
596/796/996
92
Blind H (mm) Ventilated H (mm)

99 99 92 199 B C
199 199
299
399 596/796
499 A
599 596/796
799
Code A B C
7 PR2600 506
PR2800 706
PR4600 506 308 399
PR4800 706 308 399
PR6600 506 508 599
PR6800 706 508 599
ArTu K
Adjustable back plate
Code C D
PF1806 1776 580
PF1808 1776 780
PF2006 1966 580
PF2008 1966 780

Busbars Insulators
BA0400 PB 0803
20 1730 273,5
20
39
20
68 68 68 20
BA0800
PB 0802
20 1730 229
20
20
103,5
BA1250
20 1730
45
45
20 45
60
PB 1601
349,9
78,5
60
BA1600
20 1730
86 86 86 20
PB 1600
348
60
204
BA2000
25 1730
60
86 86 86 20
60
PB 1603
250
124,5
Accessories
60
AD1077
65 5 68 68 68 20
PB 3201
405
22
90
158
60
Ø9 91 98.5 93.5 25

Overall dimensions
Flat busbars
Busbars Insulators
Insulators for busbars up to 630A
A 1750
BP0634 BP0630
25 Ø6,5
50
B 128 123 60 60 60
245
Code In (A) A B
BR0250 250 5 15 230
BR0400 400 5 25
Insulators for busbars up to 6300A
BR0630 630 10 30
BP1250 BP1600
BR4005 400 5 32 300 300
1750
5 10
C 25 Ø10, 5 30÷125 30÷125
7
70 70 70 70 70 70
D
75
BP2500
480
10
10
30÷125
Code In (A) C D
BR6305 630 5 50
BR8005 800 5 63
110 110 110
BR1250 1250 5 100
BR1600 1600 10 100
BP3200
480
10
E 1750
10
30÷125
F
110 110 110
BP1621/BP1622
480
10
Code 10
In (A) C D
BR2000 4000 10 120 160÷200
BR2500 5000 10 160
BR2010 6300 10 200
110 110 110

Unifix cabling system
Unifix H
24 - 36 modules
Front view Side view
442 / 642 9 78 80 A
425 / 625
30
300
128 300
7
300
Unifix L
Front view Side view
36 modules 638 B 48 A
24 modules 438
18 modules 323
12 modules 218
8 modules 148
150/200
40/60
150/200
150/200
A B
ArTu L Wall-mounted 29 104
ArTu L Floor mounted 29 140
ArTu M Wall-mounted (D=150mm) 21 73
ArTu M Wall-mounted (D=200mm) 21 123
ArTu M Floor mounted 40 152
ArTu K (D=150mm) 50 173
ArTu K (D=225mm) 50 248
ArTu K (D=300mm) 50 323
ArTu K (D=500mm) 50 523
ArTu K (D=700mm) 50 723
ArTu K (D=900mm) 50 923

Overall dimensions
Accessories
Aluminium section EV1050 Aluminium nuts for EV1050
EV1056 EV1058
10.7 18 19
10
19
15 8
8
6MA 8MA
30
Brackets for cables EV1090 / EV1091 Angles for busbars EV105

7
9.5x32 30
42
Ø6 20
A
B
9.5x17 32
A B
EV1090 49 20
EV1091 65 36
EV1092 85 51
EV1093 106 80

Accessories
Terminal box supports
EV1110 EV1112
22 8 6 MA
9
12.5
7 48.5
5.5 MA
41.1 13
12
49 Ø6,5
13 10 7x12
Ø6.5
13
7x10 10 6 MA 7x12
Ø5.2
7x12
50 22 55 79
70
20 20
10 11
Depth adapter
7
AP6000 AP6001
24
24
23.5 37.5
16.5 25.5
33.45 33.45
38 38

Order codes
Gemini switchboards 8/2

ArTu L structures 8/4
ArTu M structures 8/8
ArTu K structures 8/12

Gemini switchboards
Order codes
Code Structure Weight Kg. Page Code Structure Weight Kg. Page Code Structure Weight Kg. Page
05 270 Gemini 0 2/16 1SL0255A00 Gemini 1,8 2/12 1SL0314A00 Gemini 0,812 2/13
1SL0201A00 Gemini 4,76 2/11 1SL0269A00 Gemini 1,7 2/17 1SL0336A00 Gemini 0,965 2/14
8 1SL0213A00 Gemini 10,65 2/11 1SL0279A00 Gemini 3,1 2/17 1SL0344A00 Gemini 0,8325 2/19
1SL0214A00 Gemini 12,78 2/11 1SL0280A00 Gemini 5 2/17 1SL0345A00 Gemini 1,75 2/19
1SL0225A00 Gemini 14 2/11 1SL0291A00 Gemini 0,23 2/13 1SL0356A00 Gemini 0,337 2/16
1SL0252A00 Gemini 0,725 2/12 1SL0309A00 Gemini 0,56 2/13 1SL0381A00 Gemini 0 2/22

1SL0384A00 Gemini 0,006 2/22 ED2993 Gemini 1645 2/18
1SL0414A00 Gemini 0,875 2/20 ED3101 Gemini 0,3 2/18
1SL0434A00 Gemini 2,775 2/21 ED3272 Gemini 607 2/18 8
1SL0458A00 Gemini 0,089 2/19 EN0105K Gemini 0,09 2/21
1SL0465A00 Gemini 13,6 2/20
1SL0466A00 Gemini 16,2 2/20
1SL0470A00 Gemini 1,35 2/22
1SL0471A00 Gemini 2 2/22
1SL0472A00 Gemini 3,05 2/22
1SL0473A00 Gemini 3,35 2/22
ED0025 Gemini 11555 2/18
ED0026 Gemini 8000 2/18
ED2944 Gemini 2154 2/18
ED2951 Gemini 3336 2/18
ED2961 Gemini 0,4 2/18
ED2962 Gemini 0,6 2/18
ED2969 Gemini 4,5 2/18
ED2977 Gemini 6700 2/18

ArTu L structures
Order codes
AA1000 ArTu L 0,15 3/46 AD1090 ArTu L 0,51 3/49 ED2225 ArTu L 2,1 3/44
AA5600 ArTu L 20 3/47 AD1097 ArTu L 0,56 3/43 ED2266 ArTu L 2,7 3/44
AA6140 ArTu L 0,01 3/49 AD1101 ArTu L 0,05 3/32 ED2290 ArTu L 3 3/44
AA6160 ArTu L 0,02 3/49 AD1102 ArTu L 0,02 3/32 ED2308 ArTu L 3180 3/44
AA8004 ArTu L 0,01 3/49 AD1390 ArTu L 3/32 ED2332 ArTu L 3,1 3/44
AD1004 ArTu L 0,55 3/47 AD1600 ArTu L 0,24 3/32 ED2340 ArTu L 3 3/44
AD1005 ArTu L 0,42 3/46 AD1800 ArTu L 0,36 3/32 ED2357 ArTu L 2,76 3/44
8 AD1027 ArTu L 0,69 3/47 AL1000 ArTu L 0,18 3/46 ED2381 ArTu L 1,024 3/44
AD1027 ArTu L 0,69 3/47 AL1001 ArTu L 1,35 3/46 ED2399 ArTu L 0,92 3/44
AD1028 ArTu L 0,306 3/47 AL2000 ArTu L 0,12 3/46 ED2407 ArTu L 1,56 3/44
AD1029 ArTu L 0,41 3/47 AP6000 ArTu L 0,01 3/30 ED2531 ArTu L 972 3/43
AD1030 ArTu L 0,438 3/47 BA0400 ArTu L 3,3 3/38 ED2549 ArTu L 972 3/43
AD1031 ArTu L 0,518 3/47 BA0800 ArTu L 4,5 3/38 ED2550 ArTu L 880 3/43
AD1033 ArTu L 0,22 3/49 BF1602 ArTu L 2,7 3/41 ED2551 ArTu L 1600 3/43
AD1034 ArTu L 2 3/47 BF2502 ArTu L 4,2 3/41 ED2552 ArTu L 1540 3/43
AD1036 ArTu L 0,07 3/49 BF4002 ArTu L 3 3/41 ED2553 ArTu L 1540 3/43
AD1038 ArTu L 0,14 3/47 BF4012 ArTu L 6,5 3/41 ED2554 ArTu L 1540 3/43
AD1053 ArTu L 2,95 3/47 BP0630 ArTu L 0,4 3/40 ED2556 ArTu L 1037 3/43
AD1064 ArTu L 0,26 3/38 BR0250 ArTu L 1,3 3/40 ED2559 ArTu L 0 3/43
AD1070 ArTu L 0,03 3/49 ED0001 ArTu L 0,22 3/44 ED2572 ArTu L 1038 3/43
AD1080 ArTu L 0,25 3/47 ED0025 ArTu L 11555 3/45 ED2654 ArTu L 800 3/43

ED2753 ArTu L 1166 3/43 EV1037 ArTu L 0,04 3/49 IP1000 ArTu L 0,71 3/28
ED2894 ArTu L 900 3/43 EV1051 ArTu L 1 3/48 IP1201 ArTu L 0,58 3/28
ED2961 ArTu L 0,4 3/45 EV1110 ArTu L 2,74 3/46 IP2000 ArTu L 1,37 3/28
ED2962 ArTu L 0,6 3/45 EV1112 ArTu L 2,74 3/46 IP2001 ArTu L 0,96 3/28
ED2969 ArTu L 4,5 3/45 EV1113 ArTu L 0,125 3/46 KB1001 ArTu L 0,5 3/42
ED2977 ArTu L 6700 3/45 EV1119 ArTu L 3,6 3/41 KB1002 ArTu L 0,95 3/42
8
ED3082 ArTu L 1480 3/45 EV1151 ArTu L 0,1 3/48 KO1260 ArTu L 4,78 3/33
ED3090 ArTu L 3360 3/45 EV1152 ArTu L 0,1 3/48 KO1261 ArTu L 4,78 3/33
ED3101 ArTu L 0,3 3/45 EV1153 ArTu L 0,1 3/48 KO1262 ArTu L 3,08 3/33
ED3104 ArTu L 0,3 3/45 EV1156 ArTu L 0,07 3/48 LF1400 ArTu L 10,17 3/24
ED3108 ArTu L 300 3/45 EV2110 ArTu L 0,558 3/46 LF1600 ArTu L 11,61 3/24
ED3116 ArTu L 350 3/45 EV2112 ArTu L 0,558 3/46 LF1800 ArTu L 13,05 3/24
ED3124 ArTu L 498 3/45 GD1512 ArTu L 0,72 3/30 LF2000 ArTu L 14,5 3/24
ED3132 ArTu L 1977 3/45 GD1515 ArTu L 3/30 LK1000 ArTu L 3,39 3/35
ED3272 ArTu L 607 3/45 GD1520 ArTu L 0,8 3/30 LK1001 ArTu L 3,39 3/36
ED3363 ArTu L 500 3/45 IP0600 ArTu L 0,43 3/28 LK1100 ArTu L 4,52 3/35
EV1008 ArTu L 0,04 3/49 IP0800 ArTu L 0,57 3/28 LK2002 ArTu L 2,64 3/37
EV1036 ArTu L 0,04 3/49 IP0801 ArTu L 0,39 3/28 LK2004 ArTu L 3,39 3/35

ArTu L structures
Order codes
LK2008 ArTu L 4,11 3/37 LX1006 ArTu L 3,561 3/36 MI1800 ArTu L 5,02 3/23
LK2100 ArTu L 4,58 3/35 LX1008 ArTu L 4,03 3/37 MI2000 ArTu L 5,57 3/23
LK2101 ArTu L 4,62 3/37 LX1100 ArTu L 3,819 3/35 PA1600 ArTu L 2,6 3/34
LK2104 ArTu L 4,85 3/35 LX1101 ArTu L 3,963 3/37 PA2600 ArTu L 2,94 3/34
LK3000 ArTu L 3,45 3/35 LX1104 ArTu L 4,76 3/35 PB0802 ArTu L 0,66 3/38
LK3001 ArTu L 3,39 3/36 LX1108 ArTu L 5,427 3/37 PB0803 ArTu L 0,4 3/38
LK3002 ArTu L 3,28 3/37 LX2000 ArTu L 2,672 3/35 PC0300 ArTu L 1,49 3/33
LK3003 ArTu L 3,58 3/37 LX2001 ArTu L 3,61 3/36 PC0600 ArTu L 3/33
8 LK3301 ArTu L 3,66 3/35 LX3008 ArTu L 1,82 3/37 PC1202 ArTu L 7,18 3/26
LK5005 ArTu L 6,53 3/36 MC0600 ArTu L 3,69 3/22 PC1802 ArTu L 10,64 3/26
LK5007 ArTu L 4,11 3/37 MC1000 ArTu L 6,15 3/22 PC1860 ArTu L 15 3/34
LK6011 ArTu L 7,09 3/36 MI0600 ArTu L 1,67 3/22 PC2080 ArTu L 22,57 3/34
LK6012 ArTu L 9,45 3/37 MI0800 ArTu L 2,23 3/22 PC2401 ArTu L 0,61 3/34
LX1000 ArTu L 2,7 3/35 MI1000 ArTu L 2,79 3/22 PC2600 ArTu L 1,4 3/34

PC3800 ArTu L 3,23 3/34 PS2728 ArTu L 2,45 3/32 SV1000 ArTu L 2,08 3/27
PC6800 ArTu L 6,37 3/34 PS4968 ArTu L 2,5 3/32 TL1000 ArTu L 0,7 3/29
PC8401 ArTu L 2,67 3/34 PV0600 ArTu L 6,16 3/25 TL1000 ArTu L 0,7 3/39
PF1002 ArTu L 1,45 3/33 PV1200 ArTu L 12,32 3/25 TL1100 ArTu L 0,85 3/39
PF1108 ArTu L 8,44 3/33 PV1824 ArTu L 24,86 3/25 TS4000 ArTu L 2 3/47 8
PM1500 ArTu L 1,13 3/31 PV2000 ArTu L 20,29 3/25 TS4001 ArTu L 2,5 3/47
PM1536 ArTu L 1,47 3/31 PV2000 ArTu L 20,29 3/25 TS4002 ArTu L 2 3/47
PM2312 ArTu L 2,93 3/31 PV2024 ArTu L 27,55 3/25 TS4003 ArTu L 2 3/47
PM2315 ArTu L 3,9 3/31 RC1000 ArTu L 14,41 3/29 TS4011 ArTu L 2 3/47
PM2612 ArTu L 0,652 3/31 RC2000 ArTu L 10,19 3/29 TS4012 ArTu L 2 3/47
PM2624 ArTu L 1,2 3/31 SH0100 ArTu L 1,155 3/28 TS4013 ArTu L 2 3/47
PM2624 ArTu L 1,2 3/45 SH0200 ArTu L 1,419 3/28 TU8000 ArTu L 1,35 3/46
PM2836 ArTu L 2 3/31 SH0208 ArTu L 1,82 3/28 VB7035 ArTu L 0,6 3/49
PM2836 ArTu L 2 3/45 SH0600 ArTu L 0,52 3/27 VC0600 ArTu L 5,74 3/22
PM3624 ArTu L 2,87 3/31 SH0608 ArTu L 1,26 3/27 VC0800 ArTu L 7,65 3/22
PM3872 ArTu L 3,82 3/31 SL0600 ArTu L 9,84 3/22 VC1600 ArTu L 14,66 3/23
PM6672 ArTu L 4,41 3/31 SL0800 ArTu L 13,12 3/22 VC1625 ArTu L 8,77 3/23
PO1431 ArTu L 6,02 3/27 SL1000 ArTu L 16,4 3/22 VC1800 ArTu L 15,9 3/23
PO1631 ArTu L 12 3/27 SL1200 ArTu L 19,67 3/22 VC1825 ArTu L 9,86 3/23
PR2600 ArTu L 1,96 3/34 SL1600 ArTu L 24,95 3/23 ZL1000 ArTu L 2,48 3/24
PR6600 ArTu L 5,39 3/34 SL2008 ArTu L 41,32 3/23
PR6800 ArTu L 6,86 3/34 SV0600 ArTu L 1,25 3/27
PS2720 ArTu L 1,27 3/32 SV0800 ArTu L 1,66 3/27

ArTu M structures
Order codes
AA1206 ArTu M 0 4/41 AD1077 ArTu M 1,05 4/34 ED2191 ArTu M 4100 4/38
AA1560 ArTu M 0,02 4/46 AD1080 ArTu M 0,25 4/44 ED2209 ArTu M 1450 4/38
AA1570 ArTu M 0,03 4/46 AD1081 ArTu M 0,25 4/44 ED2217 ArTu M 2,04 4/39
AA5600 ArTu M 20 4/42 AD1083 ArTu M 0,25 4/44 ED2225 ArTu M 2,1 4/39
AD1004 ArTu M 0,55 4/44 AD1104 ArTu M 0,02 4/27 ED2316 ArTu M 3,48 4/39
AD1006 ArTu M 0,55 4/44 AD1390 ArTu M 4/27 ED2324 ArTu M 2,76 4/39
AD1009 ArTu M 0,086 4/30 AD1800 ArTu M 0,36 4/27 ED2340 ArTu M 3 4/39
8 AD1027 ArTu M 0,69 4/44 AD3303 ArTu M 0,15 4/47 ED2373 ArTu M 1,104 4/39
AD1028 ArTu M 0,306 4/44 AP6000 ArTu M 0,01 4/30 ED2373 ArTu M 1,104 4/39
AD1029 ArTu M 0,41 4/44 AZ4000 ArTu M 3,5 4/47 ED2381 ArTu M 1,024 4/39
AD1030 ArTu M 0,438 4/44 BA0400 ArTu M 3,3 4/34 ED2399 ArTu M 0,92 4/39
AD1031 ArTu M 0,518 4/44 BA0800 ArTu M 4,5 4/34 ED2407 ArTu M 1,56 4/39
AD1033 ArTu M 0,22 4/47 BF1602 ArTu M 2,7 4/37 ED2531 ArTu M 972 4/38
AD1034 ArTu M 2 4/44 BF2502 ArTu M 4,2 4/37 ED2549 ArTu M 972 4/38
AD1035 ArTu M 0,12 4/44 BF4002 ArTu M 3 4/37 ED2550 ArTu M 880 4/38
AD1036 ArTu M 0,07 4/47 BF4012 ArTu M 6,5 4/37 ED2551 ArTu M 1600 4/38
AD1037 ArTu M 0,352 4/30 BP0630 ArTu M 0,4 4/36 ED2552 ArTu M 1540 4/38
AD1041 ArTu M 0,34 4/43 BP0632 ArTu M 0,55 4/36 ED2553 ArTu M 1540 4/38
AD1044 ArTu M 0,99 4/43 BR0250 ArTu M 1,3 4/36 ED2554 ArTu M 1540 4/38
AD1055 ArTu M 1,67 4/43 CA1401 ArTu M 1,237 4/47 ED2558 ArTu M 0 4/38
AD1061 ArTu M 0,88 4/38 ED0001 ArTu M 0,22 4/39 ED2572 ArTu M 1038 4/38
AD1070 ArTu M 0,03 4/47 ED0025 ArTu M 11555 4/40 ED2654 ArTu M 800 4/38

ED2720 ArTu M 1198 4/38 ED3439 ArTu M 7800 4/40 GD6009 ArTu M 2,4 4/28
ED2738 ArTu M 1203 4/38 EV1008 ArTu M 0,04 4/46 GD6010 ArTu M 1,6 4/28
ED2746 ArTu M 1287 4/38 EV1036 ArTu M 0,04 4/46 GD8002 ArTu M 1 4/28
ED2753 ArTu M 1166 4/38 EV1037 ArTu M 0,04 4/46 GD8010 ArTu M 1,9 4/28
ED2845 ArTu M 576 4/39 EV1039 ArTu M 0,04 4/46 IP3031 ArTu M 0,7 4/26
ED2894 ArTu M 900 4/38 EV1051 ArTu M 1 4/45 IP3081 ArTu M 0,7 4/26
ED2961 ArTu M 0,4 4/40 EV1110 ArTu M 2,74 4/43 IP3201 ArTu M 0,7 4/26
ED2962 ArTu M 0,6 4/40 EV1112 ArTu M 2,74 4/43 IP3203 ArTu M 0,7 4/26
ED2969 ArTu M 4,5 4/40 EV1113 ArTu M 0,125 4/43 KL2103 ArTu M 5,1 4/32
ED2977 ArTu M 6700 4/40 EV1119 ArTu M 3,6 4/37 KL3103 ArTu M 7,1 4/32
8
ED3090 ArTu M 3360 4/40 EV1152 ArTu M 0,1 4/45 KO2260 ArTu M 6,31 4/33
ED3101 ArTu M 0,3 4/40 EV1153 ArTu M 0,1 4/45 KO2261 ArTu M 6,31 4/33
ED3104 ArTu M 0,3 4/40 EV1156 ArTu M 0,07 4/45 KT1102 ArTu M 4 4/32
ED3108 ArTu M 300 4/40 EV2110 ArTu M 0,558 4/43 KT1117 ArTu M 3,89 4/32
ED3116 ArTu M 350 4/40 EV2112 ArTu M 0,558 4/43 KT2102 ArTu M 4 4/32
ED3124 ArTu M 498 4/40 FR2601 ArTu M 5 4/30 KT2117 ArTu M 3,89 4/32
ED3132 ArTu M 1977 4/40 FR2801 ArTu M 6 4/30 KT3102 ArTu M 5,6 4/32
ED3272 ArTu M 607 4/40 FR4601 ArTu M 10,5 4/30 KT3112 ArTu M 3,9 4/32
ED3280 ArTu M 608 4/40 FR4801 ArTu M 11,5 4/30 KT3118 ArTu M 3,13 4/32
ED3298 ArTu M 574 4/40 GC6002 ArTu M 1 4/28 KT3212 ArTu M 5,6 4/33
ED3355 ArTu M 400 4/40 GC8002 ArTu M 1 4/28 KT4102 ArTu M 11,56 4/33
ED3363 ArTu M 500 4/40 GD1520 ArTu M 0,8 4/40 KT4110 ArTu M 2,95 4/32
ED3405 ArTu M 3700 4/40 GD6002 ArTu M 1 4/28 KT4212 ArTu M 9,25 4/33

ArTu M structures
Order codes
KT5110 ArTu M 4,43 4/32 PC3800 ArTu M 3,23 4/31 PR4600 ArTu M 3,92 4/31
KT6213 ArTu M 9,53 4/33 PC6800 ArTu M 6,37 4/31 PS2720 ArTu M 1,27 4/27
KX1602 ArTu M 3,702 4/32 PC8600 ArTu M 5,39 4/31 PS2728 ArTu M 2,45 4/27
KX1603 ArTu M 5,64 4/33 PC8800 ArTu M 8,58 4/31 PS2960 ArTu M 1,27 4/27
KX1604 ArTu M 5,64 4/33 PF2610 ArTu M 2,5 4/30 PS2968 ArTu M 2,45 4/27
KX2604 ArTu M 4,25 4/33 PM2312 ArTu M 2,93 4/29 PS4968 ArTu M 2,5 4/27
KX2619 ArTu M 3,592 4/32 PM2315 ArTu M 3,9 4/29 PV1060 ArTu M 10,5 4/24
KX3602 ArTu M 5,6 4/32 PM2624 ArTu M 1,2 4/29 PV1260 ArTu M 12 4/24
KX3609 ArTu M 5,64 4/33 PM2836 ArTu M 2 4/29 PV1660 ArTu M 17 4/24
KX3612 ArTu M 3,596 4/32 PM2836 ArTu M 2 4/40 PV1680 ArTu M 21,5 4/24
8 KX3618 ArTu M 3,13 4/32 PM3624 ArTu M 2,87 4/39 PV1860 ArTu M 19,5 4/24
KX4615 ArTu M 6,55 4/32 PO1060 ArTu M 12 4/25 PV4060 ArTu M 7 4/47
LF1425 ArTu M 9,5 4/23 PO1260 ArTu M 13 4/25 PV6060 ArTu M 7 4/24
LF1625 ArTu M 10,8 4/23 PO1460 ArTu M 15,5 4/25 PV8060 ArTu M 9 4/24
LF1825 ArTu M 12 4/23 PO1630 ArTu M 14 4/25 SA1350 ArTu M 2,2 4/41
LF2025 ArTu M 13,5 4/23 PO1631 ArTu M 12 4/23 SH6001 ArTu M 2,7 4/42
PA1600 ArTu M 2,6 4/31 PO1660 ArTu M 17,5 4/25 SH8001 ArTu M 3,7 4/42
PA2600 ArTu M 2,94 4/31 PO1680 ArTu M 22 4/25 SM1462 ArTu M 40,96 4/22
PB0802 ArTu M 0,66 4/34 PO1830 ArTu M 13 4/25 SM1662 ArTu M 44,69 4/22
PB0803 ArTu M 0,4 4/34 PO1831 ArTu M 8 4/23 SM1682 ArTu M 45,18 4/22
PC1600 ArTu M 0,96 4/31 PO1860 ArTu M 19 4/25 SM1862 ArTu M 48,51 4/22
PC1660 ArTu M 13,5 4/31 PO1880 ArTu M 23 4/25 SM1882 ArTu M 49 4/22
PC1860 ArTu M 15 4/31 PO2060 ArTu M 22 4/25 TR2001 ArTu M 0,22 4/42
PC1880 ArTu M 20,25 4/31 PO2080 ArTu M 26 4/25 TR3001 ArTu M 0,78 4/35
PC2060 ArTu M 16,875 4/31 PO6060 ArTu M 7,5 4/25 TR3001 ArTu M 0,78 4/42
PC2080 ArTu M 22,57 4/31 PO6069 ArTu M 10 4/47 TS4000 ArTu M 2 4/43
PC2600 ArTu M 1,4 4/31 PO8060 ArTu M 10 4/25 TS4001 ArTu M 2,5 4/43
PC2800 ArTu M 2,6 4/31 PR2600 ArTu M 1,96 4/31 TS4002 ArTu M 2 4/43
PC3600 ArTu M 1,96 4/31 PR2800 ArTu M 2,74 4/31 TS4003 ArTu M 2 4/43

TS4011 ArTu M 2 4/43
TS4012 ArTu M 2 4/43
TS4013 ArTu M 2 4/43
TV2000 ArTu M 0,47 4/35
TV2000 ArTu M 0,47 4/42
TV6200 ArTu M 0,46 4/35
TV6200 ArTu M 0,46 4/35
TV6200 ArTu M 0,46 4/36
TV8200 ArTu M 0,75 4/35
TV8200 ArTu M 0,75 4/35
TV8200 ArTu M 0,75 4/36
TV8200 ArTu M 0,75 4/36
VB7035 ArTu M 0,6 4/47
VB7035 ArTu M 0,6 4/47
VC1622 ArTu M 15 4/22
VC1632 ArTu M 20,58 4/23
VC1822 ArTu M 16 4/22
VC1832 ArTu M 22,54 4/23
VC2022 ArTu M 18 4/22
8
VC2032 ArTu M 29,4 4/23
ZD2325 ArTu M 3,8 4/47
ZD2625 ArTu M 8,5 4/47
ZD2825 ArTu M 10 4/47

ArTu K structures
Order codes
AA1560 ArTu K 0,02 5/106 AD1058 ArTu K 0,01 5/106 BA1250 ArTu K 9,16 5/88
AA1570 ArTu K 0,03 5/106 AD1061 ArTu K 0,88 5/63 BA1600 ArTu K 10,72 5/88
AA5600 ArTu K 20 5/103 AD1061 ArTu K 0,88 5/95 BA2000 ArTu K 15,7 5/88
AA6100 ArTu K 0,01 5/106 AD1063 ArTu K 4,16 5/89 BF1602 ArTu K 2,7 5/94
AA6140 ArTu K 0,01 5/106 AD1065 ArTu K 0,2 5/89 BF4002 ArTu K 3 5/94
AA8004 ArTu K 0,01 5/106 AD1069 ArTu K 2,4 5/89 BP0630 ArTu K 0,4 5/92
AA9610 ArTu K 0,5 5/98 AD1070 ArTu K 0,03 5/107 BP0632 ArTu K 0,55 5/92
AD1001 ArTu K 0,2 5/107 AD1071 ArTu K 0,25 5/88 BP0634 ArTu K 0,45 5/92
8 AD1022 ArTu K 0,32 5/107 AD1080 ArTu K 0,25 5/104 BR0250 ArTu K 1,3 5/92
AD1024 ArTu K 5,5 5/87 AD1081 ArTu K 0,25 5/104 BR0400 ArTu K 2,8 5/92
AD1025 ArTu K 6 5/87 AD1083 ArTu K 0,25 5/104 BR0630 ArTu K 6,2 5/92
AD1027 ArTu K 0,69 5/104 AD1088 ArTu K 1,41 5/65 BR1600 ArTu K 29 5/92
AD1034 ArTu K 2 5/104 AD1102 ArTu K 0,02 5/65 BR8005 ArTu K 8,6 5/92
AD1035 ArTu K 0,12 5/104 AD1103 ArTu K 0,02 5/65 BS3250 ArTu K 1,6 5/92
AD1036 ArTu K 0,07 5/107 AD1104 ArTu K 0,02 5/65 BS5050 ArTu K 1,8 5/92
AD1037 ArTu K 0,352 5/66 AD1390 ArTu K 5/65 BS6350 ArTu K 2,25 5/92
AD1041 ArTu K 0,34 5/103 AD1600 ArTu K 0,24 5/65 CA1600 ArTu K 1,571 5/107
AD1048 ArTu K 0,2 5/107 AD3301 ArTu K 0,15 5/107 ED0001 ArTu K 0,22 5/96
AD1053 ArTu K 2,95 5/104 AP6000 ArTu K 0,01 5/66 ED0025 ArTu K 11555 5/97
AD1054 ArTu K 0,9 5/103 AZ4000 ArTu K 3,5 5/99 ED0026 ArTu K 8000 5/97
AD1055 ArTu K 1,67 5/103 AZ4000 ArTu K 3,5 5/107 ED2183 ArTu K 3100 5/95
AD1056 ArTu K 0,3 5/88 BA0400 ArTu K 3,3 5/88 ED2191 ArTu K 4100 5/95
AD1057 ArTu K 28 5/107 BA0800 ArTu K 4,5 5/88 ED2209 ArTu K 1450 5/95

ED2217 ArTu K 2,04 5/96 ED2746 ArTu K 1287 5/95 EV1036 ArTu K 0,04 5/106
ED2258 ArTu K 2,4 5/96 ED2894 ArTu K 900 5/95 EV1051 ArTu K 1 5/105
ED2290 ArTu K 3 5/96 ED2936 ArTu K 580 5/96 EV1091 ArTu K 0,88 5/105
ED2324 ArTu K 2,76 5/96 ED2961 ArTu K 0,4 5/97 EV1110 ArTu K 2,74 5/103
ED2332 ArTu K 3,1 5/96 ED2962 ArTu K 0,6 5/97 EV1111 ArTu K 0,68 5/103
ED2340 ArTu K 3 5/96 ED2969 ArTu K 4,5 5/97 EV1112 ArTu K 2,74 5/103
8
ED2557 ArTu K 0 5/95 ED3108 ArTu K 300 5/97 FH1020 ArTu K 6,42 5/84
ED2598 ArTu K 1068 5/95 ED3355 ArTu K 400 5/97 FH3220 ArTu K 5 5/84
ED2738 ArTu K 1203 5/95 EV1008 ArTu K 0,04 5/106 FH3650 ArTu K 10,78 5/84

ArTu K structures
Order codes
EV1119 ArTu K 3,6 5/103 FV3558 ArTu K 12 5/85 KE3205 ArTu K 13 5/83
FH3680 ArTu K 11 5/84 FV4456 ArTu K 2,34 5/85 KE3236 ArTu K 18 5/83
FH3690 ArTu K 5,248 5/85 FV4458 ArTu K 4,4 5/85 KE4000 ArTu K 16,5 5/76
FH3691 ArTu K 4,68 5/85 FV4556 ArTu K 4 5/85 KE4100 ArTu K 16,5 5/83
FH3760 ArTu K 12,74 5/84 FV4557 ArTu K 1,85 5/85 KE4214 ArTu K 13 5/83
FH3780 ArTu K 12 5/84 FV4668 ArTu K 5,5 5/85 KE4234 ArTu K 13 5/83
FH3960 ArTu K 3,5 5/85 GC6002 ArTu K 1 5/63 KE5214 ArTu K 13,2 5/83
FH3961 ArTu K 3,12 5/85 GC8002 ArTu K 1 5/63 KE5215 ArTu K 13,2 5/76
FH3965 ArTu K 6,5 5/85 GD1000 ArTu K 1,75 5/63 KE5234 ArTu K 13,2 5/83
FH4220 ArTu K 0,228 5/84 GD6002 ArTu K 1 5/63 KE6340 ArTu K 16,2 5/83
8 FH4430 ArTu K 0,9 5/84 GD6009 ArTu K 2,4 5/63 KE6342 ArTu K 16,2 5/76
FH4540 ArTu K 1,1 5/84 GD6011 ArTu K 1,68 5/63 KI4114 ArTu K 12,65 5/72
FH4650 ArTu K 1,3 5/84 GD8002 ArTu K 1 5/63 KI4116 ArTu K 22,45 5/80
FH4760 ArTu K 1,5 5/84 IP3010 ArTu K 0,66 5/59 KI4119 ArTu K 22,45 5/80
FR2600 ArTu K 5 5/77 IP3060 ArTu K 0,62 5/59 KI5116 ArTu K 22,45 5/80
FR4600 ArTu K 10,5 5/77 IP3180 ArTu K 0,7 5/59 KL1102 ArTu K 7,52 5/73
FR6600 ArTu K 16 5/77 IP4140 ArTu K 0,9 5/60 KL3104 ArTu K 7,2 5/73
GD4002 ArTu K 5/97 IP4160 ArTu K 1,35 5/60 KL3114 ArTu K 7,76 5/73
FV3456 ArTu K 6,85 5/85 IP4181 ArTu K 3,22 5/60 KL4115 ArTu K 6,55 5/68
FV3458 ArTu K 7,94 5/85 KE2215 ArTu K 13 5/83 KL4116 ArTu K 3,93 5/68
FV3556 ArTu K 10 5/85 KE2235 ArTu K 18 5/83 KL4118 ArTu K 10,44 5/75

KL5101 ArTu K 6,32 5/73 KO2261 ArTu K 6,31 5/77 KT3211 ArTu K 7,53 5/74
KL5115 ArTu K 10,25 5/73 KO2281 ArTu K 8,18 5/77 KT3410 ArTu K 4 5/80
KL5212 ArTu K 12,25 5/69 KT1100 ArTu K 3,89 5/80 KT3420 ArTu K 4 5/80
KL5213 ArTu K 12,25 5/75 KT1101 ArTu K 5,64 5/71 KT3421 ArTu K 3,88 5/71
KL5214 ArTu K 11,65 5/75 KT1102 ArTu K 4 5/68 KT3426 ArTu K 5,02 5/74
KL7213 ArTu K 10,58 5/76 KT2102 ArTu K 4 5/68 KT4120 ArTu K 1,87 5/80
8
KN1146 ArTu K 5/76 KT2110 ArTu K 3,9 5/80 KT4121 ArTu K 11,37 5/82
KN4868 ArTu K 5/83 KT3114 ArTu K 5 5/71 KT4411 ArTu K 2,95 5/71
KO1250 ArTu K 20,5 5/76 KT3121 ArTu K 5,82 5/71 KT5110 ArTu K 4,43 5/68

ArTu K structures
Order codes
KT5120 ArTu K 4,74 5/72 KT6119 ArTu K 15,25 5/72 KX1607 ArTu K 4,728 5/72
8 KT5212 ArTu K 8,25 5/69 KT6220 ArTu K 9,53 5/81 KX2612 ArTu K 4,25 5/75
KT5430 ArTu K 4,92 5/80 KT7561 ArTu K 8,98 5/81 KX3605 ArTu K 5 5/73
KT6111 ArTu K 9,53 5/72 KX1131 ArTu K 5,64 5/73 KX3611 ArTu K 4,679 5/73

KX4141 ArTu K 12,65 5/73 KY3621 ArTu K 5,6 5/81 PB1603 ArTu K 1,11 5/88
KX4142 ArTu K 5,64 5/73 KY4141 ArTu K 22,45 5/81 PB3201 ArTu K 1,11 5/88
KX4411 ArTu K 2,95 5/71 KY4411 ArTu K 1,87 5/80 PC1210 ArTu K 1,96 5/67
KX4611 ArTu K 4,637 5/73 LA1810 ArTu K 52,5 5/55 PC1680 ArTu K 18,3 5/67
KX4612 ArTu K 3,539 5/68 LA1860 ArTu K 31 5/55 PC1800 ArTu K 1,27 5/67
KX4614 ArTu K 4,899 5/69 LA1880 ArTu K 42 5/55 PC1840 ArTu K 10 5/67
KX4615 ArTu K 6,55 5/68 LA2010 ArTu K 52 5/55 PC1860 ArTu K 15 5/67
KX4622 ArTu K 4,625 5/73 LF1626 ArTu K 12,1 5/55 PC2060 ArTu K 16,875 5/67
KX4627 ArTu K 6,33 5/73 LF1810 ArTu K 52 5/55 PC2080 ArTu K 22,57 5/67
8
KX4633 ArTu K 5,45 5/73 LF1840 ArTu K 19 5/55 PC2600 ArTu K 1,4 5/67
KY1131 ArTu K 8,293 5/81 LF1860 ArTu K 25 5/55 PC3400 ArTu K 1,57 5/67
KY1607 ArTu K 3,89 5/81 LF2040 ArTu K 19,5 5/55 PC4600 ArTu K 2,45 5/67
KY1611 ArTu K 3,89 5/81 LF2050 ArTu K 24,78 5/55 PC4800 ArTu K 4,41 5/67
KY2421 ArTu K 2,7 5/80 LI1840 ArTu K 23 5/57 PC6800 ArTu K 6,37 5/67
KY2607 ArTu K 3,89 5/81 LI2040 ArTu K 26 5/57 PF1806 ArTu K 25 5/78
KY2611 ArTu K 3,581 5/81 LI2060 ArTu K 30 5/57 PF1808 ArTu K 32 5/78
KY2621 ArTu K 3,755 5/81 LI2080 ArTu K 35 5/57 PF2005 ArTu K 2,5 5/79
KY2631 ArTu K 5,6 5/81 PA1010 ArTu K 1,913 5/67 PF2006 ArTu K 35,5 5/78
KY3131 ArTu K 10,57 5/81 PA1600 ArTu K 2,6 5/67 PF2008 ArTu K 36 5/78
KY3411 ArTu K 4 5/80 PA2010 ArTu K 3,826 5/67 PF2090 ArTu K 4,166 5/79
KY3421 ArTu K 4 5/80 PA2600 ArTu K 2,94 5/67 PF2100 ArTu K 5,166 5/77
KY3601 ArTu K 5,5 5/81 PB0802 ArTu K 0,66 5/88 PF2401 ArTu K 1,8 5/77

ArTu K structures
Order codes
PF2801 ArTu K 3,6 5/77 PO1833 ArTu K 13 5/62 RF1680 ArTu K 23,2 5/58
PF2805 ArTu K 3,2 5/79 PO1841 ArTu K 15,2 5/56 RF1810 ArTu K 25 5/58
PF2810 ArTu K 3,6 5/70 PO1861 ArTu K 20,5 5/56 RF1830 ArTu K 10,5 5/62
PF3100 ArTu K 7,151 5/77 PO2031 ArTu K 9 5/62 RF1880 ArTu K 24 5/58
PF3801 ArTu K 6 5/77 PO2081 ArTu K 28 5/56 RF2060 ArTu K 20,66 5/58
PF3805 ArTu K 4,6 5/79 PR2600 ArTu K 1,96 5/67 RF2080 ArTu K 26,56 5/58
PF4005 ArTu K 5,6 5/79 PR2800 ArTu K 2,74 5/67 SA1350 ArTu K 2,2 5/98
PF4090 ArTu K 8,135 5/79 PR4600 ArTu K 3,92 5/67 SH1030 ArTu K 2,94 5/86
PF4601 ArTu K 5,6 5/77 PS2017 ArTu K 3,826 5/65 SH4000 ArTu K 2 5/86
PF4610 ArTu K 4,5 5/70 PS2019 ArTu K 3,826 5/65 SH4030 ArTu K 3,3 5/86
PF4801 ArTu K 9 5/77 PS2720 ArTu K 1,27 5/65 SH4031 ArTu K 3,15 5/87
8 PF6005 ArTu K 8,25 5/79 PS2968 ArTu K 2,45 5/65 SH4035 ArTu K 9,23 5/87
PF6401 ArTu K 7 5/77 PS4960 ArTu K 1,3 5/65 SH8570 ArTu K 2,984 5/86
PF6405 ArTu K 5,9 5/79 PS4968 ArTu K 2,5 5/65 SK1010 ArTu K 64,5 5/53
PF6601 ArTu K 9,5 5/77 PV1661 ArTu K 18,6 5/56 SK1100 ArTu K 64,5 5/54
PF6801 ArTu K 11 5/77 PV1681 ArTu K 23,6 5/56 SK1600 ArTu K 16,72 5/53
PF8005 ArTu K 12,5 5/79 PV1811 ArTu K 30,85 5/56 SK1800 ArTu K 19 5/53
PM2010 ArTu K 3,826 5/64 PV1841 ArTu K 14,3 5/56 SK1803 ArTu K 9,5 5/54
PM2312 ArTu K 2,93 5/64 PV1861 ArTu K 19,5 5/56 SK1804 ArTu K 8 5/54
PM2624 ArTu K 1,2 5/64 PV1882 ArTu K 35 5/56 SK1881 ArTu K 3,97 5/84
PM2836 ArTu K 2 5/64 PV2011 ArTu K 41,13 5/56 SK2003 ArTu K 10 5/54
PM2836 ArTu K 2 5/97 PV2012 ArTu K 24,5 5/56 SK2002 ArTu K 10 5/55
PM3836 ArTu K 3,82 5/64 PV2082 ArTu K 32 5/56 SK4010 ArTu K 35 5/53
PM3836 ArTu K 3,82 5/96 PV2083 ArTu K 32 5/57 SK4040 ArTu K 20,5 5/53
PM3872 ArTu K 3,82 5/64 RA1810 ArTu K 25 5/58 SK4050 ArTu K 28,85 5/53
PM6672 ArTu K 4,41 5/64 RA1860 ArTu K 20,5 5/58 SK4060 ArTu K 30,3 5/53
PO1631 ArTu K 12 5/62 RA1880 ArTu K 24 5/58 SK4080 ArTu K 36 5/53
PO1633 ArTu K 14,6 5/62 RA2010 ArTu K 28,82 5/58 SK6010 ArTu K 52,5 5/53
PO1811 ArTu K 25,098 5/56 RF1630 ArTu K 10,8 5/62 SK6050 ArTu K 36,54 5/53
PO1831 ArTu K 8 5/62 RF1660 ArTu K 18,2 5/58 SK6060 ArTu K 41,6 5/53

SK6080 ArTu K 46,5 5/53 TR8301 ArTu K 0,49 5/93 TV2635 ArTu K 5/94
SK6600 ArTu K 41,6 5/54 TR8400 ArTu K 0,5 5/102 TV8221 ArTu K 1,39 5/91
SK8010 ArTu K 54,9 5/53 TR8500 ArTu K 0,45 5/102 VB7035 ArTu K 0,6 5/107
SK8025 ArTu K 28,28 5/53 TR8600 ArTu K 0,5 5/102 VC1624 ArTu K 17,5 5/61
SK8040 ArTu K 36 5/53 TR8800 ArTu K 0,5 5/102 VC1820 ArTu K 28,5 5/61
SK8050 ArTu K 44,84 5/53 TR8900 ArTu K 0,62 5/102 VC1823 ArTu K 26 5/61
SK8060 ArTu K 49,5 5/53 TS4000 ArTu K 2 5/104 VC1824 ArTu K 19,5 5/61
SK8080 ArTu K 57,5 5/53 TS4001 ArTu K 2,5 5/104 VC2020 ArTu K 31,5 5/61
SK8800 ArTu K 57,5 5/54 TS4002 ArTu K 2 5/104 VC2023 ArTu K 30 5/61
SV1815 ArTu K 14,63 5/87 TS4003 ArTu K 2 5/104 VC2024 ArTu K 22,9 5/61
SV2011 ArTu K 1,587 5/87 TV1001 ArTu K 1,53 5/90 VC3050 ArTu K 26,55 5/62
SV2015 ArTu K 16,25 5/87 TV1001 ArTu K 1,53 5/93 VC3060 ArTu K 28 5/62
SV2061 ArTu K 1,76 5/86 TV1005 ArTu K 2,84 5/90 VC3080 ArTu K 29,5 5/62
SV2064 ArTu K 3,13 5/87 TV1005 ArTu K 2,84 5/93 ZD1015 ArTu K 1,3 5/53
SV3010 ArTu K 3,912 5/86 TV1261 ArTu K 2,89 5/94 ZD1090 ArTu K 5,75 5/53 8
TR1201 ArTu K 3,06 5/94 TV5101 ArTu K 1,18 5/90 ZD2460 ArTu K 8,1 5/99
TR6005 ArTu K 0,39 5/93 TV6101 ArTu K 0,83 5/90 ZD2660 ArTu K 11 5/99
TR6205 ArTu K 0,49 5/94 TV8001 ArTu K 0,74 5/90 ZD2860 ArTu K 13 5/99
TR8000 ArTu K 0,98 5/102 TV8202 ArTu K 2,61 5/90 ZK1100 ArTu K 8,351 5/100
TR8001 ArTu K 0,98 5/93 TV8203 ArTu K 0,58 5/91 ZR3000 ArTu K 12,87 5/100
TR8005 ArTu K 0,49 5/102 TV2630 ArTu K 5/93 ZR8000 ArTu K 20 5/100
TR8101 ArTu K 0,49 5/93 TV2631 ArTu K 5/93
TR8101 ArTu K 0,49 5/102 TV2632 ArTu K 5/93
TR8201 ArTu K 0,49 5/94 TV2633 ArTu K 5/94
TR8205 ArTu K 0,78 5/94 TV2634 ArTu K 5/94

Notes
Notes
Notes
Notes
Contact us
ABB SACE
1STC008001D0204 - 06.2014 - 6.000

The data and illustrations are not binding. We reserve
the right to modify the contents of this document on the
A division of ABB S.p.A. basis of technical development of the products, without
Automation and Distribution Boards prior notice.
Via Italia, 58 Copyright 2014 ABB. All right reserved.
23846 Garbagnate Monastero (LC) - Italy

Tel: +39 031 3570.111
Fax: +39 031 3570.228
www.abb.com/lowvoltage

Distribution Switchgear: Technical Catalogue - June 2014

Uploaded by

Copyright:

Available Formats

Distribution Switchgear: Technical Catalogue - June 2014

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Distribution Switchgear: Technical Catalogue - June 2014

Uploaded by

Copyright:

Available Formats

Technical catalogue | June 2014

ABB Tecnichnical catalogue | 1STC008001D0204

Among the companies in the Group, ABB SACE is up front

ABB: Energy Efﬁciency for a sustainable

CAT 7 FrontCAD is compatible

Gemini. Quality and safety.

ArTu. A great offer, really high performances

ArTu. Born certiﬁed.

Certificato N°OHS-015 Certificato N°1612/98/S

Certificato N° EMS-051 Certificato N°SGI004

ArTu L. Why complicate your life?

ArTu M. Maximum protection up to 630A.

ArTu. High performances? No problem

Characteristics of Gemini switchboards 1/2

ABB Technical catalogue | 1STC008001D0204 1/1

1/2 1STC008001D0204 | ABB Technical catalogue

Fixing hooks and

ABB Technical catalogue | 1STC008001D0204 1/3

The ArTu switchgear is noted for the following features:

The range of The ArTu

1/4 1STC008001D0204 | ABB Technical catalogue

Use and installation

ABB Technical catalogue | 1STC008001D0204 1/5

The ArTu switchgear has the following functional widths:

The panels for

1/6 1STC008001D0204 | ABB Technical catalogue

The ABB SACE The Uniﬁx rapid

ABB Technical catalogue | 1STC008001D0204 1/7

450 375 230

600 375 230

600 500 230

750 500 330

900 750 300

800 600 165

1000 600 165

1200 600 165

1400 600 195

1600 600 195

1800 600 195

2000 600 195

1400 800 195

1600 800 195

1800 800 195

2000 800 195

1/8 1STC008001D0204 | ABB Technical catalogue

Busbar distribution Uniﬁx distribution

ABB Technical catalogue | 1STC008001D0204 1/9

1000 600 165

1200 600 165

1400 600 195

1/10 1STC008001D0204 | ABB Technical catalogue

Busbar distri- System Pro M

Vert. T1-T2 T3 T4-T5-T6 XT1-XT3 XT2-XT4

ABB Technical catalogue | 1STC008001D0204 1/11

1800 600 500

1/12 1STC008001D0204 | ABB Technical catalogue

Busbar distribution Uniﬁx distribution Tmax moulded-case circuit- Emax air

ABB Technical catalogue | 1STC008001D0204 1/13

ABB Technical catalogue | 1STC008001D0204 2/1