Scribd
Upload
73 views1 page

Option Platin e

Uploaded by

Alberto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views1 page

Option Platin e

Uploaded by

Alberto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

POSIDRIVE® FDS 4000 STÖBER

ANTRIEBSTECHNIK

14. Option Boards


14.1 Option Board GB 4001 and EA 4001

GB4001 EA4001
Purpose: Encoder connection TTL or HTL and buffered Purpose: Encoder connection TTL or HTL (can be switched),
encoder output TTL or HTL (can be switched), one binary 5 additional binary inputs, 1 binary output, external 24 V supply
output, external 24 V supply for encoder and inverter for encoder and inverter
Application: High-quality encoder connection, synchronous Application: Positioning, synchronous running
running
Terminals: Plug connectors X20 and X21 on top of device Terminals: Plug connectors X20 and X21 on top of device

Caution:
Fixed
encoder
power
supply
UB = 18 V

* Bin. output
BA2 is EA-4000-compatible
contained in
basic device
as
relay2/BA2.

Plug connector X21: Buffered encoder output for GB4001 Plug connector X21: I/O expansion for EA4001
1: Reference ground, connected internally with X20.7 + X20.9 A: BA4, Binary output, for data see BA1 (left)
2: BA1, binary output Techical data, BA1: B: BA3, Binary output
3: / C Inverted encoder track C 1: 0 V Ref. ground
4: C Encoder track C (zero track) L level 1 V at 20 mA, 2: BA1, Bin. output
5: / B Inverted encoder track B Ri = 10 3: BE10, Bin. input
6: B Encoder track B H level = Uext – 4 V at 4: BE9, Bin. input
7: / A Inverted encoder track A 20 mA, Ri = 120 5: BE8, Bin. input
8: A Encoder track A 6: BE7, Bin. input 0 V on X21.1, X20.7 and X20.9 are
connected but galvanically isolated
7: BE6, Bin. input from X1.8 device ground!
Encoder output: Imax = 20 mA. Resolution can be set in 5
stages (1/1 to 1/16) with parameter H21. Technical data - binary inputs:

The encoder output can be switched between 5 V L level: +8 V, H level: +12 V


(plant setting) and 24 V (HTL) with a sliding switch Voltage limits: -10 V to +32 V, Ri = 2.3 k , Ta = 4 msec
in the middle of the board. All BEs and BAs are equipped with optocouplers and are
Use shielded cable! galvanically isolated from the basic device. Reference ground
= terminal 1.
Plug connector X20: Connection of incremental encoder and ext. 24 V with GB4001 and EA4001
1: /C Inverted encoder track C (zero track) Connection of TTL
2: C Encoder track C (zero track) and HTL encoder
3: /B Inverted encoder track B (inv. frequency*) Gray
4: B Encoder track B (frequency*) Pink
5: /A Inverted encoder track A (inv. sign*) Yellow
6: A Encoder track A (sign*) Green
7: 0V Encoder power supply UB, con. internally with X20.9 White
8: UB Encoder power supply, UB = 18 V, 200 mA The three sliding switches are Brown
9: 0V External voltage supply used to switch the terminating
Blue
10: 24V External voltage supply, 20.4 V to 28.8 V DC, resistors on tracks A, B and C
between 1.6 k (HTL Red
max. of 0.5 A
encoder, plant setting) and * Terminating resistance can
Max. frequency = 500 kHz, min. pulse duration = 500 nsec 120 for TTL encoder. be switched for HTL and TTL.

Important: The negated tracks must be connected. All three tracks are monitored for wire break (fault 3 :n- eed c ). This
does not apply to the evaluation of the stepper motor signals. The signal rise time from 10% to 90% of the level must be 2
µsec. The type of option board is automatically recognized and indicated in parameter E54. The external 24 V voltage supply
(terminals 9 and 10) must be connected and must already be present when the inverter is turned on.
H20=2:encoder in specifies the X20 function as input for incremental encoder. The motor encoder must be set to B26=1:X20
with vector control via X20. The signals "direction" and "sign" can be used with H20=3:Stepmotor In as reference value for the
electronic gearbox (activation with parameter G20).

Interference immunity: EN 61000-4-4. All cables shielded. Cables: Use original STÖBER cables!

55

You might also like