Scribd
Upload
77 views2 pages

Firmware Release Note: Model: CLX-4195N. FN Date: February 17, 2017

This firmware release note describes updates made in several versions of firmware for the CLX-4195N printer model. The updates include fixes for issues like USB scanning and color registration failures, as well as additions of new error codes and support for PostScript printing. Installation instructions are provided for updating the firmware via a USB cable or over a network connection. The updates are tested to work with Samsung toner cartridges only.

Uploaded by

Dennis Besekow
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views2 pages

Firmware Release Note: Model: CLX-4195N. FN Date: February 17, 2017

This firmware release note describes updates made in several versions of firmware for the CLX-4195N printer model. The updates include fixes for issues like USB scanning and color registration failures, as well as additions of new error codes and support for PostScript printing. Installation instructions are provided for updating the firmware via a USB cable or over a network connection. The updates are tested to work with Samsung toner cartridges only.

Uploaded by

Dennis Besekow
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Firmware Release Note

Model : CLX-4195N. FN Date: February 17, 2017

Version Category Change Description

- Fix the USB scan to PC issue


V4.xx.01.58 - Fix the Auto Color Registeration fail
Fix Defect
(20-May, 2014) - Improve connection of C3N USB device in special case
- Gigabit Network Connection Error

Add the new error code(M3-1112, Jam Inside of Machine)

Fix the PCL error issue


V4.xx.02.16
Fix Defect Fix PDF direct print issue
(11-Dec, 2014)
Photo Print Quality & Copy Text Improvement

Improve the paper curl


V4.xx.03.06
Add Func. Apply PostScript
(14-May, 2015)

Added "Network Connection Status" to Network Configuration Report


Add Func.
V4.xx.03.15
Apply to PrinterOn Cloud Print.
(29-Mar, 2016)

Fix Defect Scanned image is not getting scanned properly via ADF after cancelling Flatbed Scan.

Machine Settings,Network Settings,System Security,Network Security,User access


V4.xx.03.16 control values are not retaining after firmware upgrade
Fix Defect
(5-Dec, 2016)
Address Book gets deleted after Firmware Upgrade

※ Note
- Please do not turn off the printer and your computer until firmware update finishes.
- If you are using USB connection, disconnect all other USB printers from the PC.
- The firmware update you are about to install has been tested for compatibility
with Samsung toner cartridge products ONLY.
Installing The upgrade may cause a non-Samsung toner cartridge to malfunction.
- Do not run your printer during the firmware update.(Do not have any print job)
How to update the firmware using a USB cable.
1. Make sure that the machine is connected to the PC with a USB cable.
2. Check the current firmware version of your printer.
- If the firmware version is V4.xx.01.48 and more lower,
Execute a patch file(CLX4195FN_UpgradeJig.exe)
And then patch rom will be download on the machine.
Please wait until green LED is ON.(About 2~3 minutes)
- If the firmware version is V4.xx.01.49 and more higher, Go to next step.
3. Drag 'SWUPGRADE_ON.prn' and drop down it on usblist2.exe.

4. Drag the firmware file(*.hd) and Drop down it on usblist2.exe.


And then, firmware update will be started automatically.

How to update the firmware for a network connected printer.


1. Check the current firmware version of your printer.
- If the firmware version is V4.xx.01.48 and more lower,
Execute a patch file(CLX4195FN_UpgradeJig.exe)
And then patch rom will be download on the machine.
Please wait until green LED is ON.(About 2~3 minutes)
- If the firmware version is V4.xx.01.49 and more higher, Go to next step.

2. Open Internet Explorer and enter the IP address of your printer.


3. Go to the SyncThruWeb Service (SWS) main home page.
Login as Admin in SyncThruWeb Service.
NOTE: Login using the Administrator ID and Password established
during initial machine setup.
4. Click [Maintenance] on the top menu.
And then click [Firmware Upgrade] or Application Management > Application
5. Click Add button
6. Click [Browse].
Choose installation file by browsing file system. And click OK button
7. The firmware update will start.
Once the f/w update is complete, the machine power-off and power-on automatically.

You might also like