Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Check Sheet Inspection: Pt. Dffi

    Uploaded by

    Jovianto Prisila
    1. The document is a check sheet inspection report for an equal tee part number 07 made of A234 WPB steel. 2. It lists the nominal and toleranced dimensions that were measured and inspected, including outside diameter, inside diameter, thickness, top bevel, weld bevel, and distances from the center to each end. 3. All actual measured dimensions were within specification tolerances according to the report.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Check Sheet Inspection: Pt. Dffi

    Uploaded by

    Jovianto Prisila
    39 views2 pages
    1. The document is a check sheet inspection report for an equal tee part number 07 made of A234 WPB steel. 2. It lists the nominal and toleranced dimensions that were measured and inspected, including outside diameter, inside diameter, thickness, top bevel, weld bevel, and distances from the center to each end. 3. All actual measured dimensions were within specification tolerances according to the report.

    Original Title

    EQUAL TEE 2 S80_OK

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document is a check sheet inspection report for an equal tee part number 07 made of A234 WPB steel. 2. It lists the nominal and toleranced dimensions that were measured and inspected, including outside diameter, inside diameter, thickness, top bevel, weld bevel, and distances from the center to each end. 3. All actual measured dimensions were within specification tolerances according to the report.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    39 views2 pages

    Check Sheet Inspection: Pt. Dffi

    Uploaded by

    Jovianto Prisila
    1. The document is a check sheet inspection report for an equal tee part number 07 made of A234 WPB steel. 2. It lists the nominal and toleranced dimensions that were measured and inspected, including outside diameter, inside diameter, thickness, top bevel, weld bevel, and distances from the center to each end. 3. All actual measured dimensions were within specification tolerances according to the report.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    DOC.

    NO FM-QCC-004
    REV. NO 01
    CHECK SHEET INSPECTION REV. DATE 17 January, 2019

    PT. DFFI PAGE of

    Customer : PT. Chevron Pacific Indonesia Part No. : 07 Inspection by : Firman I/Sofyan D
    Job No. : 89709 Dwg No. : - Inspection Report : Final Inspection
    Quantity : 5 pcs Material : A234 WPB Heat Number : 37005

    Part Name : Standard


    Meas. Actual Dimension
    EQUAL TEE 2" S80 Item No. Position Remark
    Device Nominal Tol
    (ASME B16.9)
    Drawing / Sketch : MTC No V
    Visual V

    +1,6mm
    D Outside Diameter VC 60,3mm
    -0,8mm

    ID

    ID Inside Diameter VC 49,22mm ±1,6mm

    t Thickness UT 5,54mm min 4,84mm

    tb
    tb top bevel (plain) VC 1,6mm ±0,8

    w Weld Bevel BP 37,5˚ ±2,5˚

    C Center to end HG 64mm ±2mm

    M Center to end HG 64mm ±2mm

    NOTE :
    Measuring tool used : Inspected by Reviewed by
    -V = Visual - HG = Height Gauge -SR = Steel Ruller
    - VC = Vernier Caliper - BP = Bevel Protactor
    - UT = Ultrasonic Thickness
    Date : Date :
    DOC. NO FM-QCC-004
    REV. NO 01
    CHECK SHEET INSPECTION REV. DATE 17 January, 2019

    PT. DFFI PAGE of

    Customer : Part No. : Inspection by :


    Job No. : Dwg No. : Inspection Report :
    Quantity : pcs Material : WPB-A234 Heat Number :

    Part Name : Standard


    Meas. Actual Dimension
    EQUAL TEE 2" S80 Item No. Position Remark
    Device Nominal Tol
    (ASME B16.9)
    Drawing / Sketch : MTC No V
    Visual V

    +1,6mm
    D Outside Diameter VC 60,3mm
    -0,8mm

    ID

    ID Inside Diameter VC 49,22mm ±1,6mm

    t Thickness UT 5,54mm min 4,84mm

    C Center to end HG 64mm ±2mm

    M Center to end HG 64mm ±2mm

    NOTE :
    Measuring tool used : Inspected by Reviewed by
    -V = Visual - HG = Height Gauge -SR = Steel Ruller
    - VC = Vernier Caliper - BP = Bevel Protactor
    - UT = Ultrasonic Thickness
    Date : Date :

    You might also like