Blood Cell Washing Centrifuge: Specifications

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Blood Cell Washing Centrifuge

Automatic centrifuges for Coomb’s test and blood cell washing. Automatic microcomputer
control substantially shortens blood cell washing time—as many as 24 samples in three
minutes (washing three times). Sized for convenient counter-top placement.

MC450
■ Specifications

Model MC 450

Test-tube size
Samples 24 (φ10, φ12 x 75 mm)
Speed (rpm) 1,200 rpm (200 x g)/3,000 rpm (1,200 x g)
Process display 4-stage display: WASH CENTRIFUGE DECANT AGITATE
Manual operation speed 3,000 rpm or 1,200 rpm
Timer Automatic/manual: 1 - 99 sec./1 - 999 sec.
Termination signal Selection can be made from among 5 kinds of melodies and electronic buzzers.
Power requirements AC 115V±10%, 10A, 50/60Hz, AC 220V±10%, 5A, 50/60Hz
Dimensions (mm) 410 (H) x 370 (W) x 450 (D)
MC450
Weight (kg) 29
Washing cycles are under full-automatic 905589C1 AC 220V, 50/60Hz
Part No. (order No.)
operation! 905589C2 AC 115V, 50/60Hz

Note: MC450 meets current European Community guidelines and is labeled.


■ Standard accessories
Rotor 1 (24 samples)
Distributor 1
Tank for physiological salt solution
1 (5 liters)
(with liquid level detector)
Test-tube (φ12 x 75 mm) 50
Drain hose (m) 2.0

Instruction manual 1

New operation process


● The overflow method is used for the washing process to improve corpuscle
washing potential. (This is the washing method in which physiological salt
water is injected into the test tube again after centrifugation so that some
physiological salt water will overflow.)

● Due to the use of a new-type distributor, attachment and separation of test


tubes have become easier.

● The drain cover and chamber can be dismantled easily, so cleaning has
become simple.

● Because decanting rotational speed can be set precisely (7 stages), it is


possible to increase the degree of corpuscle dryness through adjustment of
physiological salt water remaining after termination.

● The new door interlocking mechanism further enhances safety.


Attachment and separation of test tubes
are easy due to a new-type distributor.
● Termination-announcing sound can be chosen from among five kinds of
melodies and buzzers.

● This is a mark affixed to products in conformance with EU requirements for


mechanical and electrical safety and electromagnetic compatibility.

26

You might also like