What Do You Mean by CATIA and The Scope of The Application?

By OnlineInterviewQuestions.
com
Interview either for your first job or for the job you are trying to switch will always make you feel tense. If you
have an interview on CATIA and you are looking out for interview questions and answers related to this then
you must go through these the list given below, as it can help you a lot. CATIA has a vast scope in every field
but to get selected in any MNC you must clear the interview.
Here are some frequently asked CATIA Interview questions with their answers that will help you in cracking
yours:
Q1. What do you mean by CATIA and the scope of the application?
CATIA is abbreviated for Computer Aided Three-Dimensional Interactive Application, which supports
different phases of item development from conceptualization, engineering, manufacturing, and designing. It
gives a vast exhibit of utilization for mold and dies, along with common tooling. CATIA empowers the
designing of circulated, electrical, and electronic systems from generation to manufacturing. It is most
appropriate for Mechanical Engineering candidates, as it empowers them to make 3D sections from 3D sketches
alongside offering answers for shape design, style, surface workspace, and envision shapes.
Q2. Differentiate between Split and trim?
Following are the differences between Split and Trim:
Split-: Split can be utilized with lines, curves, or surfaces to cut with a plane or surface. It’s additionally
accessible in the Part Design workbench to cut a solid.
Trim-: Trim can be utilized with lines, bends, or surfaces to cut and join the rest of the sections. Trim can
also be utilized inside a sketch.
Q3. What do you mean by NURBS?
NURBS (non-uniform rational B-splines) are mathematical portrayals of 2-or 3-dimensional objects, which can
be standard shapes, (for example, a cone) or freestyle shapes, (like cars). NURBS are utilized as a part of PC
graphics and the CAD/CAM industry and have come to be viewed as a standard method to make and represent
to complex articles.
Q4. What is Sketcher Workbench?
The sketch is a 2D profile that is utilized to make 3D models. To start making 3D models one normally begin
with a 2D sketch. Sketches are made in the Sketcher Workbench utilizing wireframe components (i.e., lines,
curves, circles, and so forth). The Sketcher Workbench is utilized to make 2D geometries planned for use in the
Part Design Workbench and different workbenches. Generally a 2D geometry is viewed as the beginning stage
for most CAD models – a basic 2D sketch can be ‘expelled’ into a 3D shape, promote 2D sketches can be
utilized to make pockets in the surface of this shape and draws can be utilized to characterize ‘cushions’
(expulsions) on the surface of 3D objects.
Q5. What is the importance of sketch tools?
As an apparatus or ability, sketching has its part in the design procedure. That part will fluctuate contingent
upon the final result being made, the size and scope of the project, the individual originator’s style, experience,
and work process, and the customer’s desires. The main purpose of sketching in advanced arts varies if you’re
making Websites, characters, representations, product concepts, or different plans.
Q6. What do you mean by true dimension and ISO-Constraints?
Let’s define the terms one by one:
True Dimension-: True dimension is the measurement, which is required after the machining. This is
the value that ought to be accomplished after the machining.
ISO- Constraints-: When degrees of freedom of geometry have been taking up by a predictable
combination of measurements and fixed geometry. That geometry is said to be ISO-CONSTRAINED.
Q7. Where do we utilize axis? State the difference between axis and construction
components?
Axis is utilized as a part of making Shaft which is the rotating feature. Axis is noticeable to some extent-
designing mode and can be chosen. However, construction elements are not visible to some parts in designing
mode and can’t be chosen. A construction component is a 2D geometric component that isn’t utilized for
making geometry, yet is utilized for positioning other 2D geometric components. Dashed lines in a sketch show
a development element. An axis is a line that is characterized as an axis of revolution for a rotating surface.
Q8. What is the utilization of Cut Part by Sketch Plane?
This alternative represents to make edges noticeable. It is utilized to hide the strong bit, which appears in front
of sketch and incapacitates us to work easily.
Q9. What is the function of mirror command in the sketch and what should what should
we do to remove the relation between original and mirrored elements?
This is an extraordinary tool when you are working on an asymmetrical sketch. The mirror highlight can be
utilized inside sketches, parts (adding sheet metal, elements, and surface bodies), and assemblies. Mirror
command in design makes a copy of the sketch about a reference plane. If we need to evacuate the connection
amongst unique and mirror elements, we have to detonate, and the connection between the original and mirror
components will be evacuated.
Q10. What is SHOW/HIDE mode? Is it possible to hide the specification tree?
Show mode empowers us to see the accessible components opened whereas, in Hide mode, we can hide the
required components from the view on a provisional premise which boosts screen space. With the assistance of
F3 button on the keyboard, it is conceivable to hide specification tree, but it must be ensured that options in
Tool command must be enabled to allow this.
Please Visit OnlineInterviewquestions.com to download more pdfs

What Do You Mean by CATIA and The Scope of The Application?

Uploaded by

Copyright:

Available Formats

What Do You Mean by CATIA and The Scope of The Application?

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

What Do You Mean by CATIA and The Scope of The Application?

Uploaded by

Copyright:

Available Formats

By OnlineInterviewQuestions.

Q2. Differentiate between Split and trim?

Following are the differences between Split and Trim:

Q3. What do you mean by NURBS?

Q4. What is Sketcher Workbench?

Q5. What is the importance of sketch tools?

Q6. What do you mean by true dimension and ISO-Constraints?

Let’s define the terms one by one:

Q8. What is the utilization of Cut Part by Sketch Plane?

Q10. What is SHOW/HIDE mode? Is it possible to hide the specification tree?

Please Visit OnlineInterviewquestions.com to download more pdfs

You might also like