Kemper Profiler Readme 7.5.4.19312

PROFILER Operating System 7.5.4.
19312
Rig Manager 3.0.136 required!
PROFILER Stage users can immediately update to this revision regardless of the OS
version currently installed!
To upgrade classical PROFILER models via USB memory stick from OS versions before
OS 7.3, OS 7.3.2 needs to be installed first!
Older versions than OS 7.3 on classical models don't recognize this new integrated
OS revision.
For this purpose OS 7.3.2 can be found on the Download Page at Older Software
Versions.
User Interface
changed: minimum/maximum of Low Cut/High Cut in Output Section shows as off

fixed: default pedal assignments
fixed: external switch assignment REV On/Off Tail
PROFILER Operating System 7.5.3.18561
OS revision.
Versions.
Audio
changed: Acoustic Simulator level increased and Space effect decreased
User Interface
added: UI to MIDI includes Tuner Mode activation and deactivation

fixed: switching empty effect modules on/off triggers UNDO
IF YOUR PROFILER IS CURRENTLY RUNNING OS 7.4.0 PLEASE UPGRADE VIA USB MEMORY STICK!
OS revision.
Versions.
Audio
fixed: sound anomalies, if High Shift in cabinet is not in neutral position
OS revision.
Versions.
Audio
fixed: phasing issue Green Scream
User Interface
fixed: UI to MIDI; slave PROFILER immediately switching into morph sound, if

another Slot gets laoded
fixed: sensitivity of knobs
OS revision.
Versions.
Audio
added: new effect Acoustic Simulator in category Equalizer

added: new effects Phase Widener and Delay Widener in category Equalizer
added: new effect Auto Swell in category Compressor
added: Low Cut and High Cut filters in Output Section affecting all outputs
added: Pitch, Voice Interval, and Key in pitch and pitch delay effects can now be
morphed
added: S/PDIF slave capability for classical PROFILER models manufactured since
about 2019. New devices show option Auto/Internal in Output Section like Stage
models do.
improved: S/PDIF latency decreased (at 44.1 kHz)
User Interface
fixed: wrong Rig gets replaced when new Rig gets stored after PROFILING
fixed: UI to MIDI; slave PROFILER loading incorrect Slot with Performance Load set
to Pending or Keep Rig
fixed: Looper Mode not displaying Overdub correctly, if Play/Record/Overdup button
gets hold after First Recording.
fixed: expression pedals having dead area in heel and toe positions after each
restart of PROFILER Stage
Factory Content
added: five delay presets, twelve wah presets, one vowel filter preset, and one
vibrato preset
changed: legacy wah presets changed to Pedal Mode=On
Rig Manager 3.0.124 or higher required!
To upgrade classical models via USB memory stick, OS 7.3 needs to be installed
first!
Older versions than OS 7.3 don't recognize this new integrated OS revision.
fixed: upgrade issue of OS 7.4.0
First integrated operating system file for all PROFILER models (Stage and classical
models)
To upgrade classical models via USB memory stick, OS 7.3 needs to be installed
first!
OS revision.
PROFILER Operating System 7.3.2.16239/17132
User Interface
fixed: issues moving Performances
User Interface
fixed: locking of modules at PROFILER Stage

Audio
added: Speaker Imprint selection for KEMPER Kone in cabinet module to

opprtunistically overwrite global selection in Output Section
User Interface
fixed: "E" always popping up in Performance Mode after 10 seconds

fixed: odd "Cent" display in bubble tuner
fixed: wrong greying out of SEND 1 settings, if backup of classical PROFILER model
gets restored on Stage
fixed: accidental abilility to morph global continuous settings of KEMPER Kone
(Directivity and Sweetness)
Rig Manager 3.0 required!
User Interface
fixed: entering particular values of parameters like Tempo, Delay Time

fixed: accidential change of assigned function of Remote's TAP button
User Interface
fixed: UI to MIDI latency

fixed: bar direction of High Cut, High Decay, High Damp
fixed: GAIN led ring on while amp is off
fixed: logic while holding LOCK button
fixed: Rig Manager doesn't follow, if Rig gets loaded via MIDI in Browser Mode
fixed: crash of classical models caused by short-term conflicts of store and
changes of View and Sorted by
changed: incorrect Polarity selections for external switches have been causing user
issues frequently. Therefor we have decided to eliminate the Polarity option for
external switches and make momentary switches mandatory, which are normally open.
Owners of Mission™ expression pedals with built-in toe switch as well as PROFILER
2-way switches don't need to care. Owners of BOSS® FS-5/FS-6 switches might need to
adjust polarity at their devices. Switching functions should get triggered when the
button gets hit instead of when it gets released.
Audio
added: support of Kemper Kone™ and Kemper Kabinet™
User Interface
fixed: Sorted By Date

fixed: Performance Load Pending left, if selecting Performance currently loaded
fixed: wrong Amplifier and Cabinet Author could be displayed, when changing
Performance via MIDI
User Interface
fixed: integrity check potentially causing sync issues with RM
User Interface
fixed: wrong position/edit buffer after Performance move

fixed: edit buffers and locking not correctly maintained during backup/restore
fixed: View Last Imported not immediately updated after import
fixed: pot behavior for reversed unidirectional parameters
fixed: SEND 1 output not correctly initiated after powercycle (Stage)
fixed: HARDFAULT when moving Performance Slot #2 to Slot #1 via "Move Up" function
in Rig Manager
User Interface
fixed: Performance buffer immediately after restart
User Interface
fixed: loading Slots via Rig Manager in conjunction with locking
Audio
fixed: lost fix for Fuzz DS
User Interface
improved: optimizations for Rig Manager 3

added: PROFILER OS deletes defective Rigs/Performances/presets at startup
fixed: issues related to Locking and Morphing
User Interface
improved: stability
User Interface
fixed: UI and Editor can get out of sync when a preset gets loaded via Editor while
the module is locked
User Interface
fixed: selecting Slots in Performance Mode via <PAGE> buttons and Rig navigation
cross
User Interface
fixed: MIDI program changes received potentially causing hang of Stage in

Performance Mode
fixed: moving Slots and loading another Slot via remote control before storing
Performance could break Rig and Slot relationship
User Interface
fixed: accidental loss of date and time at some Stage units
User Interface
fixed: start issues of Stage
Audio
fixed: Gain too low at Fuzz DS
User Interface
added: holding EDIT button of Stage opens UNDO/REDO menu

changed: PROFILER Stage stays in standby, when power cable gets plugged in
fixed: MIDI Control CC# 80 triggering Morph Button not working
fixed: occasional loss of backlight on Effects Selection Page
fixed: sticky E after storing Rig edited
fixed: View and Sorting not correctly initiated after restart
fixed: browse list not updated after Store/Rename
fixed: Snapshots don't always show up correctly
fixed: Snapshots ordered by Snapshot taken instead of original date
fixed: Morphing button does not trigger, if pressed within first half of ramp
fixed: wrong MIDI program change displayed after bootup
fixed: LED brightness setting lost during restart of Stage
User Interface
fixed: PROFILER Stage not sending MIDI (UI to MIDI, Pedals to MIDI, program changes
in Performance Mode)
fixed: Effect Button I-IIII assignments created for REV-module before OS 5.7 did
stick
fixed: snapshots not visible after upgrade
fixed: Rig browser doesn't follow correct Rig after receiving MIDI program change
fixed: Rig browser doesn't follow correct Rig after "Store As"
fixed: reverb handling of Uno4Kemper revisions before v1.4
fixed: mixed use of Morph Button and Morph Pedal might lead to sticky ramps
(improved)
User Interface
fixed: possible hang, when using Performance Mode extensively
User Interface
fixed: no audio processing of MIDI control changes #1, 4, 7 received

fixed: not restoring backups from USB memory drive while USB cable is plugged in
and connected to PC/MAC
changed: responsiveness of knobs when dialing parameter Pitch
added: Rigs sorted by author are now ordered alphabetically for each author
Audio
changed: improved timing of Tremolo
User Interface
fixed: Browser Mode asserting with MIDI program change > 127
fixed: inconsistent background color when selecting effect category with TYPE
pressed (Stage)
fixed: MorphPedal >Wah with Bypass@Stop not working properly
fixed: effect category and effect type assignment of TYPE knob not consistent
across all effect modules
fixed: Rig Tempo not always enabled/disabled correctly, if switching Slots fast in
Performance Mode
fixed: resets during startup not always functional (Stage)
fixed: rate of expression pedal scanning too low (Stage)
fixed: copy/paste of Stack Section not functional (Stack)
fixed: migration of older Stomps and Effects Section presets during upgrade
added: soft knobs 1, 2, 3 and 4 functional on Effects Selection Page
changed: enhanced Ground Lift page (Stage)
changed: second hit of EDIT button opens Effect Selection Page (Stage)
changed: scanning of foot buttons improved further (Stage)
User Interface
fixed: missing Rigs when previewing Performances via Rig Manager

fixed: reliability of Rig Manager notifications
fixed: clear morph function for EQ merged into amp module at Stage
fixed: potential stack overflow after large number of Rig changes via MIDI
fixed: occasional issues to export Rigs
User Interface
fixed: editing Slots in a Performance potentially corrupting Slot

fixed: insufficient number of tracks in init Performance causing issues
fixed: defective factory Rig during bootup
changed: scanning of foot buttons improved (Stage)
User Interface
fixed: latest mode e. g. Browser Mode survives restart (Stage)

fixed: improvements related to ground lifts (Stage)
fixed: improvements related to S/PDIF slave mode (Stage)
fixed: issue related to output volumes (Stage)
User Interface
added: selecting a Performance with pushing TYPE (Stage only)

added: backup to be restored can be selected via TYPE or BROWSE
added: Internal/Auto option for SPDIF master/slave mode (Stage only)
fixed: occasional ticking noise on Stage
fixed: Send MIDI Clock on Stage
fixed: MIDI THRU assertion on Stage
Audio
fixed: output noise while Stage is switched off
User Interface
fixed: connectivity issues with Rig Manager and MAC

fixed: accidental clock in Stage display, if restoring backup with clock activated
for PROFILER Remote
fixed: copy/paste of Slots in Performance Mode via holding RIG button at Stage
fixed: potential wrong Rig deletion in PROFILER, when deleting Rigs via Rig Manager
fixed: TAP button of Stage assignable
Audio
fixed: Stereo Widener functional again
fixed: edited parameters for Morph Sound immediately audible
User Interface
fixed: new presets of Legacy Reverb don't cause data issues anymore - such presets
stored since 6.0 get ignored!
fixed: new presets of Legacy Reverb include Bandwidth and Mid Frequency settings
fixed: accidental inverse display
fixed: display color reflecting effect type correctly, if effect category selected
via <PAGE> buttons
fixed: Stomps and Effects Section locks set in other PROFILER models are
incompatible and now get ignored in Stage
fixed: default pedal assignment at Stage
Audio
fixed: Rig X-Fade Time issue
User Interface
added: integrated effect select screen including effect category, type and preset
selection (TYPE & BROWSE)
added: Replace/Store As/Rename menu when storing effects presets
added: display name of effect preset recently loaded
added: power meter for models with internal power amp (PROFILER PowerHead™ and
PowerRack™) on page Power Amp of Output Section
added: Input Noise Gate received an additional soft knob in the Input Section and
can now be morphed. Consequently, Reamp Sens moved to a new second page.
added: export all effect presets to USB memory stick (folder Shared)
added: function to delete all snapshots at once
added: holding UNDO/REDO withdraws/recovers all edits
added: Performance Up/Down can be assigned to analog switches and corresponds to
Performance Load setting
added: assignment of Up and Down buttons of PROFILER Remote can be switched
added: Morph Button can be controlled via MIDI CC# 36
added: <PAGE> can be used to navigate through Slots of Performance similar to left
and right buttons of RIG Navigation Cross
changed: MorphPedal to Wah and MorphPedal to Pitch activated by default
changed: soft button label External Storage changed to USB Stick
changed: Wah Pedal and Pitch Pedal follow Morph Pedal controller more tightly, if
linked.
changed: global option Group of 5/Single Rig maintained during restart
fixed: accidental Rise Time when triggering Morphing via Rig Buttons
fixed: accidental Transpose value displayed in Rig Settings
fixed: analog switches with Rig Up/Rig Down assigned not switching between KEMPER
amp and reference amp in PROFILER Mode.
fixed: accidental locks after returning to Browser Mode, if Rigs were selected in
Performance Mode before
fixed: Performance scrolling continues, if Tuner Mode gets activated during
scrolling.
fixed: storing Rig previewed via Rig Manager overwriting Rig loaded before
Known Issues
The function "Factory Presets" is still missing.

Morph settings not immediately audible, but require a move of the Morph Pedal.
Audio
added: two new reverb effect types Formant Reverb and Ionosphere Reverb
Content
fixed: corrupted Rig occasionally preinstalled in factory
Audio
fixed: the real S/PDIF sync fix
Audio
fixed: S/PDIF sync issues
Audio
fixed: level of Loop Stereo
Audio
fixed: occasional Quad Delay noise

fixed: occasional DSP error, if a Rig includes many complex effects
User Interface
fixed: MIDI CC# 70/71 didn't control Reverb Mix and Reverb Time in module REV
fixed: MIDI CC# 35 didn't control Freeze of all delay and reverb effects of Rig
fixed: incorrect parameter migration of reverb effects stored before 5.0
Audio
changed: Input Swell improved in delay effects

fixed: signal flow issue of Spring Reverb under special conditions
User Interface
fixed: incorrect brightness of LOCK button under special conditions
User Interface
fixed: REV module can be locked/unlocked while in focus
fixed: Delay Flutter Rate parameter not accidentally linked to Smear parameter
fixed: rare DSP errors caused by Looper
User Interface
fixed: instant access knobs for Reverb Time and Reverb Mix dysfunctional
fixed: REV module button dysfunctional
changed: Scaling of the Mix control in Spring Reverb has changed compared to 5.6.2.
If you had created Rigs or presets including Spring Reverb under 5.6.2, please
readjust Mix.
Audio
added: five new reverb types: Spring Reverb, Natural Reverb, Easy Reverb, Echo
Reverb, Cirrus Reverb (corresponding reverb presets available for download)
added: all effect types available in all modules A - D and X - REV
changed: The former reverb types (Hall, Large Room, Small Room, Ambience, Matchbox)
are consolidated into one type named Legacy Reverb conserving the sound of all Rigs
and Presets. Legacy Reverb includes one additional parameter Room Size, which
reflects the former reverb types.
fixed: parts of amp sound accidentally bleeding into cabinet sound while AMP module
is switched off and CAB module is switched on
User Interface
changed: order of effect types

changed: parameter Del+Rev Balance moved into Rig Settings and renamed into DLY+REV
Routing
changed: Factory content not completely included in operating system file
(kaos.bin) anymore, just presets. Consequently Factory Rigs function in System
Settings renamed to Factory Presets.
changed: Volume Pedal kicks in softer, more logarithmic response curve
PROFILER Operating System 5.6.2.13481 Spring Reverb Preview
Audio
added: new effect type Spring Reverb; open one of the Modules A-D and turn BROWSE
knob to select preset REV Spring Fan. Refer to Quick Start Spring Reverb for
parameter explanations.
Stability
fixed: DABT assertion under rare conditions
User Interface
fixed: Strobo Tuner inaccuracy

Audio
added: Output Source Git / Master Mono for S/PDIF Out
User Interface
added: PAGE buttons functionality in browser screen in Performance Mode like in

Browser Mode.
added: messages indicating conflicting socket usage e. g. Monitor Stereo and Effect
Loop
fixed: UI to MIDI now working correctly
fixed: Wah Pedal Booster in combination with Wah Pedal to Volume
changed: Looper Location Pre/Post renamed into Looper Location Input/Output
Audio
added: S/PDIF clock can be selected: 44.1/48/88.2/96 kHz

added: With the option Monitor Stereo MONITOR OUT and DIRECT OUT become one logical
stereo monitor output. Functions like Output Source, Monitor Volume, Monitor Output
Link, Monitor Output Equalizer, Monitor Cab. Off, and Aux In >Mon are then applied
to both.
added: the option Aux >Mono merges the Aux In signal from RETURN and ALTERNATIVE
IN.
User Interface
added: Transpose in the Rig Settings

added: Rig Volume now also reflected on page Details in the Rig Settings
added: UI to MIDI allows to transmit all sound relevant parameters of the PROFILER
user interface via MIDI to for example establish a MIDI daisy chain of multiple
PROFILER units
fixed: release of Mute Signal if multiple methods to activate Tuner Mode are
crossed
fixed: parameter anomalies when storing Presets in Module D
changed: parameter Swell now named Input Swell
changed: parameter Hold renamed into Freeze and Action & Hold functions renamed
into Action & Freeze
changed: Output Source Delay/Reverb wet renamed to DLY/REV wet
User Interface
added: third instrument Acoustic beside Guitar and Bass

changed: Volume Pedal Locations names changed to Input, Pre Stack, Post Stack,
Output
User Interface
added: support of incoming MIDI CC#10 (Panorama)

added: holding PROFILER Remote™ Effect Buttons switches to momentary operation
automatically
fixed: possible hanging screen when syncing with Rig Manager
Audio
changed: S/PDIF optimization
User Interface
changed: Master Volume Screen enhanced

changed: Global PURE CABINET™ disappears in Cabinet Module, if disabled in Output
Section
Audio
added: Mix parameter in Treble Booster and Lead Booster

added: Ducking parameter, if Treble Booster or Lead Booster are used in stereo
Modules
changed: Mix control of distortion effects improved. Level is unity at Mix 0%
changed: DIRECT OUT/SEND muted immediately, if Effect Loop gets deactivated
changed: reduced latency of pitch shifter effects incl. Transpose
changed: sound of Formant Shifter improved in combination with pitch shifter
effects
changed: Freeze Formants in Pedal Pitch improved
changed: Freeze Formants option added in Pedal Vinyl Stop
changed: Formant Shift as continuous controller in Pedal Pitch not useful and
obsoleted
User Interface
added: PROFILER Remote™ supports PROFILER Mode

added: new MIDI option Pedals to MIDI in System Settings enables pedal controllers
CC#1, 4, 7, and 11 to be sent to two external MIDI devices, even if triggered by
pedals connected to PROFILER or Remote
added: Master Volume display reflecting all output volumes to better illustrate its
functionality
added: with the new option Signal LEDs Blue in the System Settings the color of the
Input and Output LEDs can be changed
added: new warning indicating MIDI buffer overflow, if too many program chances are
received within too short time frame
added: PROFILER doesn’t try to restore corrupted backup files
fixed: MIDI clock display stabilized
fixed: correct handling of Pedal Volume after Rig change, if WahPedal to Volume is
enabled
fixed: correct processing of MIDI controlling changes immediately following a
program change
fixed: logical conflicts between Morph Pedal and Morph Button
fixed: disabled Slots accidentally appear as enabled
fixed: Uno4Kemper conflict with relative addressing in Browser Mode
fixed: default Pitch if WahPedal to Pitch or MorphPedal to Pitch are activated.
fixed: Tuner Mode exits Performance scrolling
fixed: erroneous locks after Mode changes
fixed: erroneous Morphing of Slot 4 in Performance edit buffer after restart
fixed: polarity option for external switches gets ignored, if a pedal is configured
fixed: correct handling of delay on/off tail triggered via external switch
changed: Power Amp On instead of Power Amp in PROFILER PowerHead™ and PROFILER
PowerRack™ Output Section
changed: scale of Crystal Mix und Pitch Mix parameter changed to 0-100%
changed: option to display time on Remote on page Date and Time in System Settings
(had been hidden feature before)
User Interface
fixed: rare USB transmission errors in communication with Rig Manager

fixed: QUICK button threshold for holding increased
fixed: output volumes linked to Master Volume maintaining their volume relations
reliably
User Interface
fixed: selection of Autoload for presets gets memorized during restart

fixed: Rig and preset Autoload always exits browse screen
fixed: avoiding overlay hang of Clear Module function on page Morph in the Rig
Settings
fixed: avoiding accidental changes of pedal controllers during PROFILER Remote
start process
fixed: avoiding accidental Strobo Tuner overlay
Audio
added: new pitch shifter delay types Crystal Delay, Loop Pitch Delay, Frequency
Shifter Delay, Dual Chromatic Delay, Dual Harmonic Delay, Dual Loop Pitch Delay,
Melody Chromatic Delay, Melody Harmonic Delay, Quad Chromatic Delay, Quad Harmonic
Delay (details about these pitch shifter delay types and their parameters can be
found in the Addendum manual)
fixed: anomalies of Metal DS
fixed: anomalies of Delay Mix setting at 100% (wet)
fixed: Fuzz DS potentially causing DSP outages
User Interface
changed: color coding; Pitch Shifter Delays indicated as light green, Effect Loops
as pink, and Pitch Shifters as white
fixed: accidental loss of volume, when Remote starts and expression pedal is
connected, which is configured as Volume Pedal
fixed: Pitch Pedal reset to 0 during Rig/Slot change, if linked to Wah Pedal or
Morph Pedal (WahPedal to Pitch, MorphPedal to Pitch)
Factory Content (enclosed in software)
added: Pitch Shifter Delay Presets embedded in operating system
Rigs, Performances, presets, and snapshots created under this operating system are
only downward compatible to operating system 3.3.0 build 11973, but not with elder
operating systems!
Audio
fixed: anomaly in Recti Shaper
User Interface
fixed: old PROFILE™ not correctly migrated into new format, if Amp, Cabinet Module
or both are locked
fixed: reset of Pedal Volume during Rig change reduced from 50% to 25% and only
applied, if WahPedal to Volume is activated and Pedal Range is below 0
fixed: under rare conditions the Performances got reset to factory default after
restoring a backup
fixed: Delay Hold and Infinity are reset during Rig change
fixed: correct Power Amp Boost level maintained during restart
added: import of Rigs and presets also available in Performance Mode
only downward compatible to operating system 3.3.0 Build 11973, but not with elder
operating systems!
Audio
added: new delay types Single Delay, Dual Delay, Two Tap Delay, Serial Two Tap
Delay, Rhythm Delay, Quad Delay, and Dual Crystal Delay (details about these delay
types and their parameters can be found in the Addendum manual)
changed: Legacy Delay presets embedded in operating system exchanged against new
delay presets based on new delay types
operating systems!
User Interface
fixed: interoperability issue with specific 3rd party floorboards leveraging bi-
directional MIDI protocol
fixed: first change after power up can't be undone
operating systems!
Audio
fixed: accidental Reverb on/off status in Performance Mode

fixed: PROFILING™ test tone stereo again
User Interface
fixed: occasional assertion after upgrade

fixed: progress bar shows always up during backup
Please perform a backup before you upgrade to 4.x for the first time!
operating systems!
Audio
added: parameter PURE CABINET™ now also available in Cabinet Module

added: new parameter Looper Volume in System Settings
added: Delay/Reverb Modules’ spillover can be deselected in Rig Settings (Rig
Spillover Off)
added: new option to place Mix parameter pre or post effect loops (Loop Mono and
Loop Stereo)
fixed: Tuner mute now including DIRECT OUT sources Git&Processing und Git Studio
User Interface
added: new option Main Output -12dB in Output Section

added: separate controls for Aux In into HEADPHONE OUTPUT, MONITOR OUTPUT, and MAIN
OUT
changed: option Headphone Space renamed into Space>HeadphOnly
added: new option Tuner@Volume 0 available in Tuner Mode to suppress automatic
activation of Tuner, whenever Volume Pedal is in heel position
added: Up/Down buttons of Rig Navigation Cross not only stepping, but also
scrolling through Performances
fixed: WahPedal >Volume now also functional, if Volume Pedal Range set above 0
(booster pedal)
changed: If WahPedal >Volume is activated, pedal volume is maintained during Rig
changes and doesn’t require to be picked up at toe position after Rig change any
more.
changed: If WahPedal >Pitch is activated, pedal pitch doesn’t require to be picked
up at heel position any more, but is functional as soon as a pedal pitch effect
gets activated.
added: Linked pedal nodes can still be controlled remotely. If for example WahPedal
>Volume is activated, expression pedals configured as volume pedals are still
operational as well as MIDI CC#7.
changed: page Pedal Links with pedal controller bars moved to earlier page within
System Settings
changed: Store to Pool function renamed into Export Rig to Pool and moved from Rig
Settings to Store Performance page.
changed: a few cosmetic changes on Morph page of the Rig Settings
changed: cosmetic changes on the last page of Rig Settings with Remote Effect
Buttons assignments
added: User locks maintained during upgrades
changed: LEDs of PROFILER Remote updated faster after Slot/Rig change
fixed: parameter Amp Volume set correctly after load of stack presets
changed: increased consistency of copy/paste function across Performances, Slots,
Modules, and Sections
added: option Single Rig/Group of 5 on page Remote Settings in the System Settings,
which allows to determine, how the Remote’s Up/Down Buttons operate in Browser
Mode.
fixed: Power Amp Boost setting maintained during restart even if Power Amp has been
switched off

Locks are automatically reset to default during upgrades!
operating systems!
User Interface
fixed: anomalies selecting a Performance via TYPE knob
operating systems!
User Interface
fixed: incorrect data in Performance immediately after restart and before first new
Performance gets loaded
Rigs, Performances, Presets, and Snapshots created under this operating system are
operating systems!
Audio
fixed: potential DSP error if source of MONITOR OUTPUT is edited
operating systems!
Audio
fixed: artefacts about two seconds after loading another Performance

fixed: volume differences between left and right channels of Space effect
fixed: potential loss of spillover under specific conditions
User Interface
fixed: MIDI CC#11 now correctly controlling Morph Pedal Links
operating systems!
Audio
fixed: rare loss of spillover during Slot change

fixed: occasional erroneous Master Stereo signal while source Delay/Reverb wet is
selected
User Interface
fixed: lower sensitivity of pedal movement

fixed: occasional error message during backup or restore
fixed: Ducking set to neutral in Rigs, which had been stored before ducking was
implemented.
fixed: occasional display of erroneous Delay Mix values greater than 100%
fixed: Delay Feedback controlled again via MIDI CC# 69
fixed: display color of pitch effects light green in line with LED color
fixed: processing of mode changes while Tuner is active
changed: While MorphPedal to Wah or MorphPedal to Pitch are engaged, wah and pedal
pitch effects can also be triggered via buttons e. g. Remote’s Rig Buttons or
external buttons.
added: New option Momentary on Morph page in Rig Settings allows to determine
behavior of Morph buttons from latched (default) to momentary by Rig.
added: Master Tune renamed to Reference Pitch and confirmation screen has been
added to avoid erroneous pitch settings.
added: support for Kemper 2-way switch
In rare situations 4.0.1 public beta could damage Rigs and Performances during
upload to Rig Manager. Users experiencing error messages when loading particular
Rigs or Performances should restore the backup created before upgrading to 4.x.
operating systems!
Audio
fixed: parameter Drive in DS Plus

changed: MorphPedal to Pitch improved, pitch control needs to be picked up at heel
like at WahPedal to Pitch
User Interface
added: page Morph in Rig Settings reflecting signal chain. Modules including
Morphing are marked. Morphing can be cleared completely or selectively by
Module/Section on this page.
added: Dynamic default for Rise Time and Fall Time memorizing last user choice.
Both parameters start with 2 seconds as their initial default, but if user choses
another value e. g. 0 seconds, this will become the new default whenever Morphing
gets set up in another Rig for the first time.
added: new option Rig Button Morph in System Settings. If this isn’t ticked,
subsequent hits of Rig Buttons and MIDI CC#50-54 will reload current Rig/Slot
instead of trigger Morphing.
added: Old delay presets are automatically migrated into the pool of stomp presets;
select any Module except Reverb and turn the BROWSE knob to find these. A leading
DLY - has been added to the original preset names for easier identification. For
example, old Free Delay preset Free Oiltank migrates into Legacy Delay preset DLY –
Free Oiltank with no tick in the To Tempo box or Tap Delay preset Tap Ping Pong
migrates into Legacy Delay preset DLY – Tap Ping Pong with To Tempo ticked.
added: functions preassigned to Pedals 1-6 in order to simply configuration for new
users
added: Note Values of Legacy Delay can also be morphed
changed: Performance Mode database rationalized, which reduces time to backup and
size of backup
fixed: avoiding accidental appearance of Strobe Tuner overlay in other screens
fixed: avoiding possible corruption when sending Rigs from Rig Manager (see warning
above!)
fixed: Pedal Links e. g. MorphPedal to Wah survive restart
fixed: switching from any Rig in Morph state will not influence sound of following
Rig in Performance Mode anymore
fixed: assigning switching functions to Remote Effect Buttons I-IIII also works, if
Module is selected first
fixed: correct handling of Morphing in combination with locks and copy/paste
fixed: Contrast of PROFILER display memorized during restart
fixed: avoiding occasional flickering of type windows
Please perform a backup before you upgrade to 4.0!

only downward compatible with operating system 3.3.0 build 11973, but not with
elder operating systems!
Audio
added: Morphing (demonstration Rigs enclosed in this upgrade package and available
as Morphing Demo Rig Pack)
added: multiple delay effects supported in one Rig
fixed: crackles while editing PURE CABINET™ in combination with Space
fixed: loud noise during shutdown
fixed: Panorama parameter in Rig Settings
fixed: initialization of Amplifier Volume in PROFILER Mode
User Interface
added: Strobe Tuner with cent display replacing Bubble Tuner

added: new subpage Button Assignments on page Remote Settings in System Settings
allows to assign alternative functions to Remote’s TAP, TUNER, and LOOPER buttons
added: function Looper Button 1 (Record/Playback/Overdub) and 2 (Stop) as well as
Morph Button can be assigned to external switches and Remote’s TAP, TUNER, LOOPER
added: Morph Pedal and pedal nodes MorphPedal to Wah and MorphPedal to Pitch
combined with other pedal node selections on new System Settings page Pedal Links
added: parameter Mix in all Distortion effects enabling Morphing
added: QUICK button can be used to simulate Morphing.
added: Vibrato effect now features ducking
added: relative addressing via MIDI CC 50-54 also functional in Browser Mode
changed: MIDI CC 48/49 in Browser Mode value 0 +/- 1 Rig, value 1 +/-5 Rigs, value
2 first/last of next higher/lower bank of five
changed: Tap Delay, Free Delay, and Analog Delay are consolidated into one Delay
Type called Legacy Delay. Former Rigs and presets will automatically be migrated to
this new type without any tonal changes.
changed: PURE CABINET activated at level 3.0 by default
changed: Loop Level Adjust renamed to FX Loop Adjust
changed: Voice Mix parameter of pitch shifters renamed to Voice Balance
changed: the term Beat Scanner replacing Beat Detection in PROFILER user interface
changed: parameter Volume completely migrated from Cabinet into Amplifier Module
changed: parameter Detune in pitch shifters converted into a bipolar parameter.
Thus, positive and negative values can be dialed.
changed: Output Section cannot be locked anymore, which was meaningless anyhow
changed: Performance Load Pending without automatic timeout; exit via Remote’s
LOOPER, TUNER and TAP buttons, PROFILER EXIT button, MIDI CC# 30 and 31
changed: Type now working as preselection in Performance Mode
changed: Rig Autoload activated by default
changed: edit buffer gets cleared during upgrades, and default Rig Crunch appears
after restart.
fixed: audio now muted during firmware upgrade and during reboot after restore
fixed: accidental Rigs in Performance Mode edit buffer immediately after restart
fixed: TYPE knob functionality on Arrange Performances screen
fixed: potential corruption error during Rig load
fixed: Init Globals now enables also power amp of PROFILER PowerHead™ and PROFILER
PowerRack™
fixed: anomalies, when Cabinet Module is locked and another Merged Rig gets loaded
or Performance gets stored
fixed: DIRECT OUTPUT Source initialization after restart
added: 2 Rigs 1971 Mars Golub Crunch and 2011 More Gain AC20
added: 3 TopJimi and 6 SoundSide Rigs
added: Wah presets revised
changed: Reverb presets revised
changed: Rig browse pool has been cleaned up, excluded Rigs available as Legacy Rig
Pack 2015
changed: Delay presets and Effects Section presets revised to accommodate Legacy
Delay
changed: Factory Demo Performances revised
Performances created under this operating system are not downward compatible with
software revisions before 3.2!
User Interface
fixed: resetting pedal parameters if pedals get disconnected

fixed: crash on loading certain Rigs
added: Rig Manager is able to adjust real time clock
for example 3.0.2 operating system! Modifications will get lost!
Audio
fixed: artifacts after switching Rigs
User Interface
changed: Browse window in Performance Mode applies view and sort by selected in
Browser Mode.
changed: no MIDI clock transmission if tempo is disabled in current Rig/Slot
fixed: potential restore issues of Performances in new data structure (since 3.1.4)
fixed: accidental MIDI clock after Remote/MIDI Rig load
fixed: Monitor Cab. Off now included in output presets.
fixed: Import function greyed out, if Rig limit reached
fixed: PURE CABINET is visible, but greyed out when disabled
fixed: all Rig parameter edits trigger E incl. Clean Sens, Distortion Sens, Noise
Gate
Remote
fixed: accidental blinking of LEDs
Global functional assignments to pedals and external switches connected to Remote
get lost during upgrade and need to be redone. All pedals and switches connected to
either Remote or PROFILER need to be calibrated before first usage.
User Interface
added: support of mono and dual switches connected to Remote

added: enhancements of Pedal pages in System Settings for pedals/switches connected
to PROFILER™ as well as Remote
added: symbols on Home Screen indicate receiving MIDI commands as well as
activation of bi-directional MIDI protocol
added: global option Send MIDI clock on MIDI OUT (permanently) and on MIDI THRU (if
used as auxiliary MIDI OUT2)
added: Rig Navigation Cross buttons now also functional in list and edit screens
added: new Performance tags (Author and Comment) and parameters (Key and Tonality)
added: new page Audio Setup in System Settings introducing new parameters to
control FX loop level, Rig cross-fading time (Rig X-Fade Time)
added: new Performance Load options Pending, Slot 1, Keep Slot replacing
Performance Autoload
added: two new lock symbols on Remote display indicating locked stomps/effects
standalone or in combination with assigned Effect Buttons.
changed: parameter Auto Favorite by default off
changed: returned to former edit behavior: short hit of Module/Section buttons
switching on/off.
added: new option Quick Edit Page for QUICK button returns to last Module/Section
edit page and enables convenient editing multiple Modules and Sections.
changed: Remote connects faster after PROFILER™ start
changed: Initialized Rig renamed to Crunch
changed: Using term operating system instead of firmware
fixed: switching Rigs via MIDI doesn’t change PROFILE™
fixed: switching Delay on/off via Remote is not cutting off spillover anymore
fixed: Looper position maintained during restart
fixed: Volume Link anomaly
fixed: multiple Performance Mode anomalies
fixed: Rig parameter Panorama not accidentally locked together with Tempo anymore
Audio
added: PURE CABINET controlled via soft knob and button in Output Section
added: Loop Level Adjust to control FX loop level in System Settings
added: Rig X-Fade Time parameter in System menu
added: High Cut and Low Cut parameters in Graphics/Studio/Metal EQ
fixed: crackles during Rig change
Remote
fixed: missing MAC address issue
Factory Content
added: 2 new stomp presets for univibe and talkbox demonstration PHA Uni Trower and
WVOW Frampton also available as separate preset pack.
User Interface
fixed: loss of Performance tempo during Slot change

changed: parameter Looper Location now controlled via soft button instead of soft
knob and its default is pre instead of post
changed: parameter Rotation Speed of Rotary Speaker now controlled via soft button
instead of soft knob. This button can also be used to assign this function to one
of Remote’s Effect Buttons.
Audio
fixed: Looper volume anomalies

fixed: occasional drop of volume when switching Reverb Module
added: manual selector for Direct PROFILE™ (No Cabinet) in PROFILER Mode.
User Interface
fixed: handling of old Amplifier presets

fixed: volume of Aux In into S/PDIF OUT now controlled via Aux In > Main
fixed: potential software error when copying Amplifier Module
fixed: receiving MIDI commands while channel set to Omni
fixed: notes being displayed and Mute Signal flag being processed when PROFILER
gets started in Tuner Mode
improved: USB memory stick compatibility and performance
Audio
fixed: reliability of pasting cabinet, merging PROFILE™, and storing Merged

PROFILE™
fixed: crackles of Looper and Aux In during Rig change
fixed: occasional sound anomalies after switching between Browser and Performance
Mode multiple times
Known Issues
Direct Amp PROFILE™ not accurately recognized under specific circumstances.

Intended Solution: Manual selection of Studio versus Direct Amp PROFILE™ in
preparation.
PROFILE™ can be corrupted, if other Rigs have been merged just before. Workaround:
Always reload Rig immediately before initiating PROFILING™.
PROFILER Operating system 3.0.0.10856

User Interface
added: support of PROFILER Remote including Looper and revised System Settings (for
details refer to chapter PROFILER Remote in Reference Manual 3.0)
added: new option of QUICK button allows to recall latest edit menu
added: MIDI OUTPUT routing for two external devices and capability to send MIDI
program changes in Performance Mode (for details refer to chapter MIDI in Reference
Manual 3.0)
added: MIDI CC #48/49 value 0 stepping Rig up/down in Browser Mode
changed: time to load Slots within one Performance significantly shortened
changed: faster switching between Rigs including same Amp and Cab PROFILE™
changed: Direct Edit is permanent now. While one edit menu is open (e. g. Stomp A)
pressing another Module button (e. g. DELAY) will not switch on/off that Module but
instantly open its edit menu.
Audio
changed: next generation PROFILING™ incl. automatic detection of a Direct Amp

PROFILE™ and the ability to merge a Direct Amp PROFILE™ and a Cabinet PROFILE™ into
a so called Merged PROFILE™. Please read related article in the Addendum manual!
added: noise in delay effects fixed
added: Aux In >Main also feeding S/PDIF OUT
Factory Content
WARNING: All Rigs included in this operating system have been stored in the new
PROFILING™ format and are not downward compatible below 2.8.0 operating system!
added: 49 Merged Rigs included in operating system also available as Merged Rigs
Pack
changed: all Rigs have been stored in new PROFILING™ format and are also available
as Factory Content 3.0.
In case the current operating system installed is older than 1.8.2 release you need
to take an interim step and upgrade to 1.8.2 first, before you will be able to
install current operating system. Please use this link to download operating system
1.8.2 release and install this before you upgrade to more recent operating system:
Stability
fixed: accidental booting & burning from USB device
User Interface
fixed: LED anomalies in Rack panel software

fixed: processing of MIDI control changes #26-29 in specific scenarios
Audio
fixed: crackles while editing Low Shift in Cabinet Module

Factory Content
changed: revised factory Rig CK Rotary Speaker

User Interface
fixed: memory garbage displayed, if current view contains only one single rig
fixed: stomp type information sent to and reflected by some adapted foot-
controllers
added: key repeat for PAGE buttons and Rig Navigation Cross
added: unique default owner name Me [some-id] instead of the generic Me
changed: Effect types Noise Gate 2:1/4:1 instead of Gate 2:1/4:1
Audio
added: new Output Source Git / Master Left added for S/PDIF OUTPUT
added: new parameter Panorama in Rig Settings
fixed: DIRECT OUT with source "Master Mono/Right" now correctly switching into SEND
functionality and avoiding feedback, when any loop gets activated
fixed: avoiding noise in combination with a few clean sounds
fixed: avoiding crackling within first three seconds after rig load
changed: slightly adjusted bass response during PROFILING™ increasing authenticity
changed: reduced latency of effect Micro Pitch
changed: reduced time to bypass wah effects, if Pedal Mode set to Bypass @
Stop/Heel/Toe
User Interface
changed: faster Rig loading

changed: new preview/rating design, if previewing via Rig Manager
changed: Tuner screen appears with short delay, if triggered via Pedal Volume = 0
changed: improved support for Gordius foot controller
Audio
added: improved PROFILING™ and low frequency correction switch LFC Off in System
Settings (please read Addendum for details)
fixed: Monitor Output EQ now functional for all output sources except Git Analog
fixed: Spillover now also functional on MONITOR OUTPUT and DIRECT OUTPUT, if source
Master Right or Master Mono are selected for DIRECT OUTPUT
install current operating system. Operating system 1.8.2 release can be downloaded
from our web-page under category Operating System Updates.
User Interface
fixed: issues browsing cabinet presets or From Rigs

fixed: issues regarding undo/redo functionality
Operating system 1.8.2 Release has been included in this package for users with
older operating system installed. These need to take one interim step and install
1.8.2 release first. All other users can directly upgrade to current operating
system.
User Interface
added: new view Just Bass Rigs and vertical scroll bar for views
added: Undo/redo functionality
changed: automatic reboot after restore
changed: Exact mid-point of Master Tune now indicated as <440.0 Hz>
Audio
fixed: aliasing with small number of Rigs while Monitor Cab Off is activated
Factory Content
added: 26 brand new bass Rigs also available as Bass Rig Pack
added: a selection from the Vintage Sound Project Rick Pack created by Carsten
Litfin
added: five brand new Vintage Sound Project Rigs also included in this upgrade
package
added: a selection of Rigs from the Revolverheld Rig Pack
added: four Performances for demonstration purposes
changed: All Rigs embedded in this operating system have been revised for improved
tagging and input settings. Those Rigs which were taken out and had not been
included in any public Kemper Rig pack before are still available as Legacy Rig
Pack 2013.
NOTE: Operating system 1.8.2 release has been included in this package for users
with older operating system installed. These need to take one interim step and
install 1.8.2 release first. All other users can directly upgrade to current
operating system.
User Interface
fixed: cut off messages in External Storage menus
User Interface
fixed: avoiding potential data abort
User Interface
changed: improved boot time
added: reset of global parameters Init Globals in System Settings
Audio
fixed: low frequency response issue introduced in 2.4.0
Audio
changed: Cab parameters are more authentic and do not influence a Direct PROFILE™
nor CabDriver™ anymore.
User Interface
changed: revised Rig, amplifier, and cabinet tagging

added: new Tag Instrument enabling to differentiate between Rigs for guitar and
bass
added: rating option while previewing via Rig Manager
added: names of enabled Slots get displayed during Performance pre-selection
fixed: compatibility with old rig files while previewing via Rig Manager
fixed: threshold instead of treshold
fixed: sens (sensitivity) instead of sense
fixed: amplitude of Studio Equalizer and Metal Equalizer corrected to +-12 dB
fixed: deleting rigs with MIDI assignments via Rig Manager doesn’t cause hang
anymore
Stability
fixed: compatibility of Parallel Path with very old Rigs
Audio
fixed: functionality Formant Shift in Chromatic Pitch

fixed: incorrect load of cabinet parameters
Audio
fixed: accidental sound after Rig or preset load

fixed: Tuner mute as well as Pedal Volume affecting Parallel Path, too.
User Interface
added: Switch in Output Section to limit Space to Headphone Out (option). By

default Space affects HEADPHONE OUT and MAIN OUTS.
fixed: Chromatic Pitch including Formant Shift knob
User Interface
added: Rig Manager support
added: Performance tempo, which overrules Rig tempo
added: Performance Autoload option in System Settings. By default Performances are
not loaded before you select any particular Slot. Autoload is optional now and will
always load Slot 1.
added: new view Non-Favorites
added: User Scale presets can be stored separately from Rig and Harmonic Pitch
presets. This functionality is available as soon as you bring Harmonic Pitch into
focus, select as User Scale for one of the two voices and then press Edit User
Scale 1 or 2.
added: Beat Scanner
added: incoming MIDI clock now reflected on page Tempo in Rig Settings
changed: order of views to better reflect frequency of usage
changed: Sorted by Amp renamed into Sorted by Amp/Cab to better indicate logic
fixed: change of Favorite state doesn’t trigger erroneous rig-edit-flag anymore
fixed: successful formatting of USB memory stick not confirmed anymore before
really completed
fixed: import of output presets performed correctly now
fixed: owner name including special characters doesn’t cause backup issues anymore
fixed: interference of locked Input Section settings between Browser and
Performance Mode
Audio
added: new stomp Analog Octaver

added: new stomp Space
added: Tonestack position switch pre/post
added: Formant Shift also available for Chromatic Pitch
added for bass players: Parallel signal path (Input -> Stomp A -> Stomp B -> Master
Output) can be activated in Rig Settings.
fixed: Transpose not impacted by effect volume anymore.
fixed: Spillover issue of MONITOR OUTPUT and DIRECT OUTPUT with source Master Mono
Performance and Stability
changed: avoidance and improved recovery of DSP errors
Factory Content
added: the following rigs are included in this operating system

Lasse Lammert Signature Rig Pack (October 2013)
Franz Plasa Rig Pack (October 2013)
User scale example rig PITCH Harmonic Minor
added: User scale presets Harmonic Minor and MakeNoMistake
added: Presets for new stomps Space and Analog Octaver: SPCE Default and OCT
Default
changed: most factory Rigs revised for improved volume levelling.
User Interface
fixed: Compatibility issues with older output presets are fixed. Presets created
under 2.2.0 need to be recreated.
fixed: Copy/paste of cabinet and amplifier doesn’t cause hang of user interface
anymore.

User Interface
added: soft button WahPedal to Vol. available in System Settings and Rig Settings
(Volume Pedal Settings)
added: soft button WahPedal to Pitch available in System Settings as well as pedal
itch effects
added: current state of pedal values displayed on page 6 of System Settings
added: backup name includes Owner Name
changed: new boot and shutdown screen layout
fixed: old Rigs and presets starting with ! don’t get lost during Restore anymore
Audio
added: two new Input Sources especially for reamping

added: New Reamp Sense parameter
added: new effect Pedal Vinyl Stop
changed: Clean Sens and Distortion Sens now scaling in decibel
changed: Main Output Equalizer also affecting HEADPHONE OUTPUT
fixed: occasional loss of sound triggered by fast Rig browsing
Factory Content
added: the following Rigs are included in operating system

Ola Englund Signature Rig Pack (August 2013)
added: two new factory presets for Pedal Pitch
PPTC Two Oct Down and PPTC Two Oct Up
added: two new factory presets for Harmonic Pitch
HARM Octaver and HARM +3 +6
added: new factory preset for Pedal Vinyl Stop
PVST Vinyl Stop
changed: many factory Rigs revised to improve volume levels
This version is a minor update recommended for every user. It fixes an issue
related to the preamp gain, which was slightly lower in comparison to previous
versions.
User Interface
added: Input Source selection (Front Input/Alternative Input/SPDIF Input). Please

read related notes.
added: Monitor Volume can now also be controlled via directly connected expression
pedal
added: analog stereo switch set to Rig Up/Down steps thru Slots/Performances
Audio
added: Aux In Volume can be controlled separately for MAIN OUTPUT and MONITOR
OUT/HEADPHONE OUT
fixed: noise affecting clean sounds
fixed: Pitch Shifter tracking lack immediately after Rig change
fixed: Wah lowpass and hipass signal levels corrected
fixed: clipping of guitar signal on DIRECT OUTPUT and SPDIF OUT
changed: New Initialised Rig is now based on Christoph Kemper’s first PROFILE™ CK 0

improved: generally faster Rig load
fixed: Initialised Rig doesn’t appear accidentally anymore in Performance Mode
after restart
fixed: noise immediately after loading a Slot/Rig of another Performance
fixed: Restore selection list can handle more backup files on USB memory stick
fixed: accidental jumps of rig pointer when changing views
Factory Rigs
added: the following rigs are included in operating system

Gundy Keller Rigs (July 2013)
Bill Ruppert Rig Pack (July 2013)
Unlike other parameters of the Input stage the parameter Input Source is global and
not rig-specific. ALTERNATIVE INPUT on the rear panel can now be effectively used
in rack setups, however is more noisy than the front instrument INPUT. When Input
Source is set to Alternative Input, the ALTERNATIVE INPUT won’t work as long as a
cable is connected to the front INPUT. While Input Source is set to SPDIF INPUT,
the front input is still active, if no SPDIF cable is connected or no SPDIF signal
is detected. The front Input has got the right-of-way in order to avoid unintented
loss of the guitar signal.
User Interface
added: Restore allows to select between one of the backup archives stored on USB
memory stick
added: continuous pedal calibration
fixed: while in Performance mode temporary Tuner Mode triggered by pedal volume = 0
doesn’t accidentally switch into Browser Mode anymore
Audio
added: Stereo parameter in Chromatic and Harmonic Pitch (only available in Effects
section)
changed: Aux In now independent of rig volume and Space parameter
fixed: avoiding Clicks that had been experienced by some users
User Interface
added: Performance Mode with 125 Performances 5 Slots each to store and organize
rig. These up to 625 Rigs can be tweaked and stored independently from browse pool.
added: Extended foot controller support incl. new MIDI control change #48-54 to
step/scroll through Performances and select Slot. For details please consult the
Addendum manual.
added: Tuner Mode automatically activated while MIDI volume equals 0.
added: separate controller for pitch pedal available in MIDI (control change #4) as
well as for expression pedals directly connected
changed: Volume and Wah (and Pitch) can be flexibly assigned to each expression
pedal directly connected.
added: Wah pedal can be shared to also control pitch and/or volume (MIDI as well as
directly connected expression pedals).
added: MIDI control change #73 to control Monitor Volume
Audio
added: Pure Tuning and Formant Shift parameter in several pitch effects
changed: Tuner range increased (1/4 note) and accuracy improved
fixed: Mix parameter of MicroPitch
fixed: Phaser sound anomaly
improved: recognition of corrupted rig/preset files
Factory Rigs
added: the following Rigs are included in operating system

Rig Pack 04
Keith Merrow Signature Rig Pack
Gundy Keller Rigs
Pitch Shifter Rigs
The Amp Factory Rig Pack II
changed: 60 factory Rigs are not included in this operating system anymore, however
are still available as Legacy Factory Rigs 2012 on our download page.
Factory Presets
added: presets for all pitch shifter effects are automatically imported during
upgrade
Warning: A small number of pitch shifter parameters will be reset to their default
value, because we had to change their internal location for better compatibility
with lock and presets. These are mainly parameters of the Harmonic Shift, so it's
no big deal. The scales are not touched. Before upgrading the operating system
those parameters have to be written down and readjusted after the update. These are
the parameters in question: Smooth Chords, Voice 1 Interval, Voice 2 Interval, and
Key.
Warning: Assignment of an expression pedal directly connected and configured as Wah
pedal needs to be renewed after upgrading to and downgrading from this operating
system.
Warning: Should you retain more than 1000 Rigs/presets on your PROFILER this
upgrade might fail.
Audio
added: Pitch shifter effects including MicroPitch, Transpose, Pedal Pitch,

Chromatic Pitch, Harmonic Pitch
added: Ducking parameter in Loop Mono and Loop Stereo
improved: faster Rig switching
Warning: Should you retain more than 1000 Rigs/presets on your PROFILER this
upgrade might fail.
Audio
added: Space parameter in Master/Output Section enhances the Master Stereo signal
by a short room simulation (HEADPHONE OUTPUT and MAIN OUTPUT)
improved: Tuner has been improved, Master Tune added, and range increased (low B)
User Interface
added: warning message, if 1000 Rigs get exceeded during store or import
fixed: MIDI control changes sent immediately after a program change are now
processed correctly
fixed: potential jumps of Return level
improved: rig load time shortened
Warnings: Should you retain more than 1000 Rigs/presets on your PROFILER this
upgrade might fail.
Downgrading to operating system before 1.5.0 might require a reset. Please refer to
known issues for details.
Audio
added: Ducking parameter added for many effects (modulation, delay, reverb).
added: new effect types Phaser Vibe, Phaser Oneway, Flanger Oneway
changed: Green Scream improved
fixed: aliasing avoided
Factory Rigs
added: The Amp Factory Rig Pack included in operating system
Factory Presets
added: new amp, equalizer, cabinet, and stack presets

added: complete set of stomp/effect presets for all effect types
changed: consistent naming convention for all factory presets (please refer to
Preset Reference List in order to identify successors of your favourite factory
presets)
User Interface
added: Aux In via RETURN and ALTERNATIVE INPUT; volume control in Master/Output
Section; mixed into Master Stereo signal
added: S/PDIF OUT Volume control in Master/Output Section
added: erase of all Rigs, which are not Favorites nor My Rigs (in System Settings)
added: selective export of Rigs corresponding to current view
changed: first button hit in drop list control (view and sorted by) does not change
the value
fixed: Store/replace after loading Rig outside of current view via MIDI doesn’t
overwrite another Rig anymore
fixed: S/PDIF OUT not muted anymore after upgrade
fixed: Direct Output volume doesn’t influence Monitor Output volume anymore, when
Master ... is selected as source
fixed: occasional assertion after update
upgrade might fail.
fixed: dedicated DELAY FEEDBACK and DELAY MIX knobs on front panel functional in
delay editing mode
upgrade might fail.
Audio
fixed: Direct Out Volume doesn’t influence Monitor Output Volume, when Master ...
is selected as source
fixed: several possible memory issues when using all characters in tags
upgrade might fail.
User Interface
fixed: Rig browsing and autoload interplay improved
changed: size of factory rigs in operating system reduced
upgrade might fail.
User Interface
added: MIDI control change number 119 added in order to enable remote control of
NRPN parameters using a floorboard, which can only handle 7-bit NRPN messages (NRPN
functionality is described in our PROFILER MIDI Parameter Guide available on our
download page under category Documents).
fixed: selective browse of amp, cab or stack doesn’t accidentally load complete rig
anymore.
fixed: Edit flags are now correctly reset during rig store.
Warning: Downgrading to operating system before 1.5.0 might require a reset. Please
refer to known issues for details.
Audio
added: output source selection parameters in Output Section (page 1 of 4) and

output presets
added: new MIDI control changes can be controlled via expression pedal:
#68 Delay Mix
#69 Delay Feedback
#70 Reverb Mix
#71 Reverb Time
#72 Gain
added: reception of MIDI clock does enable tempo
changed: SPDIF improved
changed: improved Pick parameter
fixed: after reboot, the MIDI volume gets reset to maximum
User Interface
added: Selective browse of amp, stack, and cabinet

added: copy & paste for text editing
added: shutdown animation
changed: increased performance of Rig import
changed: backups do contain the current rig and setting of locks
changed: browse control timeout increased to 4 seconds
fixed: local presets and selective browse presets can be loaded while sections are
locked
fixed: dialogs are better visible
Additions and Improvements
added: soft button "View" and TYPE knob toggle new filter criteria All Rigs,
Current Author, Favorites, Last Imported, and My Rigs with drop list
added: holding RIG button or using soft button in Rig Settings flags/un-flags rig
actually loaded as Favorite
added: new function on System Settings page 3 to automatically flag any rigs as
Favorites which have created by the user himself
added: soft button and TYPE knob toggle sorting criteria with drop list
added: new sort criteria by Amp and by Gain
added: Rig Pack 02 included
added: key stomp parameters available in stomps settings
changed: detail amp/cab view in load page is now multi-lined
changed: middle frequencies on MONITOR OUTPUT (Monitor Cab. Off) emphasized by 2 dB
changed: more specific labels for stomps
Resolved Issues
fixed: reliability of import of older rigs has been improved

fixed: first on command for MIDI CC # 27 and 29 processed correctly now
fixed: an issue related to sonic artefacts with Lead Booster on high guitar notes
has been addressed
fixed: an issue related to noise on SPDIF IN while switching Rigs has been
addressed
fixed: switching delay algorithms has been improved
Resolved Issues
fixed: Changing Rigs does not produce a click noise anymore
added: Eight new stomp box effects dubbed The LoFi section
Rate Reducer
Ring Modulator
Frequency Shifter
Bit Shaper
Recti Shaper
Soft Shaper
Hard Shaper
Wave Shaper
improved: Several parameters can be adjusted in finer steps.
improved: Better S/R ratio in certain situations
The new public beta version 7426 addresses a stability issue introduced in version
7415.
added: in PROFILER Mode, ON/OFF button mutes DIRECT OUT signal

added: new noise gate stomp: Gate 2:1 with ratio 2:1 (a soft expander)
added: new noise gate stomp: Gate 4:1 with ratio 4:1 (a steeper expander)
improved: The unit boots much faster now.
improved: Rotary Speaker stomp has been refined.
improved: Better S/R ratio in certain situations
Resolved Issues
fixed: Several assertions have been addressed.

fixed: Deleting a loaded Rig does not vanish on store/replace anymore
fixed: Sorting by alphabet is case insensitive now
fixed: Sort by author/date works as expected now
fixed: Rig, which name contains an ampersands ('&'), work as expected now
fixed: First Rig after powering up sounds as expected now
fixed: Addresses an issue related to handling of multiple MIDI assignments to same
rig
fixed: Deleting the last preset doesn’t cause occasional crashes anymore
fixed: Load/Autoload works as expected when navigating using the rig key cross
fixed: A issue related to hitting delete/yes in Rig browser to fast has been
addressed
fixed: Deleting a loaded rig does not vanish on store/replace anymore
Changing to another Rig will now always recall the tempo setting from the new rig
An issue related to the the output settings has been addressed
A recently introduced issue regarding the Monitor Output and S/PDIF OUTPUT volumes
has been addressed
Note: In order to improve noise levels we have (temporarily) deactivated the

ALTERNATIVE INPUT for normal operation (plug-in your guitar on the backside of the
KPA), however it is still functional for Loop Stereo.
changed: Setup wizard does not automatically launch after OS update.

fixed: An issue regarding MIDI controller #0 reception has been addressed.
added: Tempo related effects sync to an incoming MIDI clock.
added: Monitor, Headphone and Main Output Volume can be relatively linked to MASTER
VOLUME knob.
fixed: Booting with loads of Rigs installed works as expected now.
fixed: audio latency improved

fixed: Rig import works with all characters in filename
fixed: [UI] several minor bugs fixed
added: [UI] Update Successful screen after reboot
added: Pedals can switch delay and reverb without cutting sound (delay mix / reverb
mix)
added: Volumes (Monitor/Main/Headphone) in Master/Output Section can be linked to
the MASTER VOLUME knob (first step implementation)
changed: Export/backup Rigs use new filename format name - date.
changed: LED collar for list parameters
fixed: S/PDIF OUT

fixed: cabinet crash
fixed: RETURN INPUT level
fixed: Chicken head no longer displays Tuner, if not selected.
added: Rig Navigation Cross works as cursors if a browser window is displayed.
fixed: SPDIF OUT now working with all sound cards (e.g. M-Audio 24/96).
fixed: problem adapting cabinet parameters to current sound
fixed: Names which include more than one space are allowed for MIDI program list.
fixed: delete function in input presets browser working correctly
new: mono switch can toggle Rotary Speaker (slow/fast)
new: mono switch can invert STOMP A-D, X, MOD on/off (only if Type is not off)
new: dual switch can toggle two functions e. g. STOMP A/B
new: Rotary Speaker (slow/fast) can toggle via MIDI (CC33: Rotary)
new: STOMP A-D, X, MOD on/off invert can be done via MIDI (CC16: Stomp Invert)
fixed: SPDIF IN now working (input module)

fixed: TAP CC30 behavior: The floorboard should send control change 30, values
should change each step for example: Val00, Val127, Val00,....
fixed: some more internal memory problems
fixed: delete stack presets working
fixed: handling of corrupted backup files
new: Tempo / Volume Pedal can be locked (RIG)
changed: Rig change is possible on Browser Mode MIDI program change page
changed: start dialog ask for name, which is used as Rig Author
changed: Stack page
changed: Device information page (includes serial number)
fixed: ALTERNATIVE INPUT works from beginning now

fixed: Input Section parameter are stored now (edit buffer)
fixed: Tuner by MIDI CC now on with unequal 0 and off with 0
fixed: some internal memory problems
fixed: MIDI assignment slots no longer get lost when renaming/replacing
fixed: improved performance and stability during USB media backup/restore
fixed: improved stability during operating system update
added: new DSP file (2012-01-05 22:07)
added: SPDIF Input switch in Input Section
added: Progress bar when usb storage formatting
added: MIDI control change 30 for TAP and 31 for tuner select
Initial release version. No change log entries yet.

Kemper Profiler Readme 7.5.4.19312

Uploaded by

Copyright:

Available Formats

Kemper Profiler Readme 7.5.4.19312

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Kemper Profiler Readme 7.5.4.19312

Uploaded by

Copyright:

Available Formats

PROFILER Operating System 7.5.4.

Rig Manager 3.0.136 required!

changed: minimum/maximum of Low Cut/High Cut in Output Section shows as off

PROFILER Operating System 7.5.3.18561

Rig Manager 3.0.131 required!

changed: Acoustic Simulator level increased and Space effect decreased

added: UI to MIDI includes Tuner Mode activation and deactivation

PROFILER Operating System 7.5.2.18327

Rig Manager 3.0.131 required!

fixed: sound anomalies, if High Shift in cabinet is not in neutral position

PROFILER Operating System 7.5.1.18252

Rig Manager 3.0.130 required!

fixed: phasing issue Green Scream

fixed: UI to MIDI; slave PROFILER immediately switching into morph sound, if

PROFILER Operating System 7.5.0.18050

Rig Manager 3.0.126 required!

added: new effect Acoustic Simulator in category Equalizer

PROFILER Operating System 7.4.1.17821

Rig Manager 3.0.124 or higher required!

fixed: upgrade issue of OS 7.4.0

PROFILER Operating System 7.4.0.17800

Rig Manager 3.0.122 or higher required!

PROFILER Operating System 7.3.2.16239/17132

Rig Manager 3.0.119 or higher required!

fixed: issues moving Performances

PROFILER Operating System 7.3.1.16224/16790

Rig Manager 3.0.117 or higher required!

fixed: locking of modules at PROFILER Stage

PROFILER Operating System 7.3.0.16213/16733

Rig Manager 3.0.117 required!

added: Speaker Imprint selection for KEMPER Kone in cabinet module to

fixed: "E" always popping up in Performance Mode after 10 seconds

PROFILER Operating System 7.2.2.16146/16147

Rig Manager 3.0 required!

fixed: entering particular values of parameters like Tempo, Delay Time

PROFILER Operating System 7.2.1.16122/16123

Rig Manager 3.0 required!

fixed: UI to MIDI latency

PROFILER Operating System 7.2.0.16004/16006

Rig Manager 3.0 required!

added: support of Kemper Kone™ and Kemper Kabinet™

fixed: Sorted By Date

Rig Manager 3.0 required!

fixed: integrity check potentially causing sync issues with RM

PROFILER Operating System 7.1.21.15952/15953

Rig Manager 3.0 required!

fixed: wrong position/edit buffer after Performance move

PROFILER Operating System 7.1.19.15872/15873

Rig Manager 3.0 required!

fixed: Performance buffer immediately after restart

PROFILER Operating System 7.1.18.15853/15854

Rig Manager 3.0 required!

fixed: loading Slots via Rig Manager in conjunction with locking

PROFILER Operating System 7.1.17.15813/15814

Rig Manager 3.0 required!

fixed: lost fix for Fuzz DS

improved: optimizations for Rig Manager 3

PROFILER Operating System 7.1.9.15700/15701

Rig Manager 3.0 required!

PROFILER Operating System 7.1.8.15579/15580