Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    Digital Tectonic Design

    Uploaded by

    beauty xu
    Digital Tectonic Design is a methodology that integrates digital design software with traditional construction methods through a focus on assemblies of construction elements at various scales. The authors present examples from Mies van der Rohe and Frank Lloyd Wright that employed systematic construction as an integral part of the design. They also discuss a student project that used interlocking glazing units to create a shimmering facade surface like a scaled reptile skin. The methodology offers a rigorous and expressive approach to design through emergent qualities produced by complex arrays of symbol insertions representing physical components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Digital Tectonic Design

    Uploaded by

    beauty xu
    23 views6 pages
    Digital Tectonic Design is a methodology that integrates digital design software with traditional construction methods through a focus on assemblies of construction elements at various scales. The authors present examples from Mies van der Rohe and Frank Lloyd Wright that employed systematic construction as an integral part of the design. They also discuss a student project that used interlocking glazing units to create a shimmering facade surface like a scaled reptile skin. The methodology offers a rigorous and expressive approach to design through emergent qualities produced by complex arrays of symbol insertions representing physical components.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Digital Tectonic Design is a methodology that integrates digital design software with traditional construction methods through a focus on assemblies of construction elements at various scales. The authors present examples from Mies van der Rohe and Frank Lloyd Wright that employed systematic construction as an integral part of the design. They also discuss a student project that used interlocking glazing units to create a shimmering facade surface like a scaled reptile skin. The methodology offers a rigorous and expressive approach to design through emergent qualities produced by complex arrays of symbol insertions representing physical components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views6 pages

    Digital Tectonic Design

    Uploaded by

    beauty xu
    Digital Tectonic Design is a methodology that integrates digital design software with traditional construction methods through a focus on assemblies of construction elements at various scales. The authors present examples from Mies van der Rohe and Frank Lloyd Wright that employed systematic construction as an integral part of the design. They also discuss a student project that used interlocking glazing units to create a shimmering facade surface like a scaled reptile skin. The methodology offers a rigorous and expressive approach to design through emergent qualities produced by complex arrays of symbol insertions representing physical components.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Digital Tectonic Design

    Philip Beesley and Thomas Seebohm

    Beesley, Philip and Thomas Seebohm. “Digital Tectonic Design.” Promise and Reality: State of the Art versus State of
    Practice in Computing for the Design and Planning Process. 18th eCAADe Conference Proceedings. Universität Weimar.
    Weimar. 2000.
    Digital Tectonic Design
    Presented at eCAADe Conference, Hannover 2000

    PHILIP BEESLEY and THOMAS SEEBOHM


    University of Waterloo

    Digital tectonic design is a fresh approach to architectural design methodology.Tectonics


    means a focus on assemblies of construction elements. Digital tectonics is an evolving methodology
    that integrates use of design software with traditional construction methods.We see digital tec-
    tonic design as a systematic use of geometric and spatial ordinances, used in combination with
    details and components directly related to contemporary construction.The current approach will,
    we hope, lead to an architectural curriculum based on generative form making where the com-
    puter can be used to produce systems of forms algorithmically. Digital design has tended to remain
    abstract, emphasizing visual and spatial arrangements often at the expense of materials and con-
    struction. Our pursuit is translation of these methods into more fully realized physical qualities.This
    method offers a rigorous approach based on close study of geometry and building construction
    elements. Giving a context for this approach, historical examples employing systematic tectonic
    design are explored in this paper. The underlying geometric ordinance systems and the highly
    tuned relationships between the details in these examples offer design vocabularies for use within
    the studio curriculum.The paper concludes with a detailed example from a recent studio project
    demonstrating particular qualities developed within the method.
    The method involves a wide range of scales, relating large-scale gestural and schematic stud-
    ies to detailed assembly systems. Designing in this way means developing geometric strategies and,
    in parallel, producing detailed symbols or objects to be inserted.These details are assembled into a
    variety of arrays and groups.The approach is analogous to computer-aided design’s tradition of
    shape grammars in which systems of spatial relationships are used to control the insertion of
    shapes within a space. Using this approach, a three-dimensional representation of a building is itera-
    tively refined until the final result is an integrated, systematically organized complex of symbols rep-
    resenting physical building components.The resulting complex offers substantial material qualities.
    Strategies of symbol insertions and hierarchical grouping of elements are familiar in digital design
    practice. However these strategies are usually used for automated production of preconceived
    designs. In contrast to thsse normal approaches this presentation focuses on emergent qualities
    produced directly by means of the complex arrays of symbol insertions.The rhythmic combination
    of small scale elements into large fabrics tends to produce special qualities. Like the intricate com-
    binations of warp and weft that make up the unique character of every textile, the interlinking rela-
    tionships of coursing, bonding and attachment patterns prove to be fundamental sources of charac-
    ter for this architecture.These productions work as an analog of a full-scale building.
    Examples from Mies van der Rohe and Frank Lloyd Wright are included here.The first of
    these is Mies‘ apartment project at 860 and 880 Lakeshore Drive in Chicago, completed 1951.The
    project shows systematic construction positioned as an integral aspect of the bounding envelope.
    This envelope is explicitly tectonic: the individual components and joints are deliberately articulat-
    ed.The articulation of individual tectonic components is not done for the sake of showing the skin
    as infill between the structure or hung on the outside. Instead Mies van der Rohe preferred the
    ambiguity of fusing the skin and the structure causing the skin and structure to be merged by
    means of the unifying exterior mullions.[1] We can see this clearly by comparing the plan of a cor-
    ner column at 886-880 Lakeshore in figure 1b and 1c with the plan of a column of the Seagram
    Building of 1958 in figure 1a, an example where the skin is hung outside the structure.

    BEESLEY/FORREST 2001 page 1 of 4


    D I G I TA L T E C TO N I C D E S I G N eC AADe CONFERENCE HANNOVER 2000

    Figure 1: a) Seagram Building, Mies Van der Rohe 1958, corner detail; b) and c) 860 and 880 Lakeshore Drive, Chicago, Mies
    Van der Rohe 1951, corner detail; d) Hanna House, Palo Alto, Frank Lloyd Wright 1936, detail vocabulary showing “unit lines”.

    BEESLEY/SEEBOHM 2000 page 2 of 4


    D I G I TA L T E C TO N I C D E S I G N eC AADe CONFERENCE HANNOVER 2000

    Throughout Mies van der Rohe’s work there is an implied limitless cellular space into
    which the planes of his abstract space and the tectonic components of his envelopes are insert-
    ed.[2] At 860-880 Lakeshore, this cellular space is characterized by a square grid plan whose
    intersections are the centres of the columns. All other components are positioned in relation to
    the columns. This approach, where individual components are expressed with particular emphasis
    on joints between them corresponds with the concept of objects (symbols or blocks) in com-
    puter aided design. The assembly of components that represent a column (for example I section
    steel, fireproofing, drywall, steel plate cladding, angle brackets) can be represented as a hierarchi-
    cal three-dimensional object with origin at the intersection of the grid lines. Similarly, one bay of
    curtain wall cladding can be combined into a system consisting of small I beam mullions and win-
    dow panels with insertion points controlled by the underlying grid system.
    A second example is the design of the Usonian houses of Frank Lloyd Wright, the first
    built version of which was the Herbert Jacobs house of 1936. Each of the Usonian house types
    (the polliwog, the inline, the diagonal, the hexagonal and the two-story type) had a kit of parts or
    "grammar" as Wright called it.[3] These parts were grouped according to Gottfried Semper’s
    19th century theory of four elements of architecture: earthwork, interpreted as a slab on grade
    with built in radiant heating pipes; hearth, interpreted as a massive central brick pier with fire-
    place; framework, interpreted as brick piers and a roof of tiered 2x4’s; and an enclosing mem-
    brane, a "woven fabric" consisting of thin board and batten walls sandwiched together with a thin
    wood core.[4] Internal partitions followed the same construction as the exterior enclosure.
    These Usonian parts are like digital symbols inserted in a three-dimensional gridded cage. The
    Jacobs house follows a two foot by four foot grid with thirteen-inch vertical divisions, corre-
    sponding to triple brick mortar joints aligning with joints in board and batten walls.
    A particular example is in the enclosure of the Hanna House in Palo Alto whose first
    phase working drawings date from 1936.[5] Here the underlying grid is a hexagonal mesh and
    the board and batten walls and partitions weave in and out along the edges of the hexagons.
    This effectively emphasizes the Semperian conception of an enclosure as woven fabric. The com-
    ponents of the partitions are all drawn so that they can be inserted with respect to the hexago-
    nal grid without measurement. Insertion points are shown for each component (figure 1d). In
    plan and section the positioning of each component with respect to these "unit lines" is shown.
    The digital studio project illustrated in figure 2 employs a similar approach to these his-
    torical examples. Façade elements are here developed from individual glazing units in interlock-
    ing angled positions. The student project included fine-grained development of mounting details
    for the envelope system. Attachment points for these hardware systems were translated into
    insertion points for digital symbols. Like a large scale textile, this skin is built out of arrays of the
    individual elements. The rhythmic combination of these units gave the project a shimmering sur-
    face, like a scaled reptile skin. Thus the interlinking relationships of the attachment patterns
    directly produce the particular character for this architecture. This approach offers an effective
    and highly expressive method for design.

    BEESLEY/FORREST 2001 page 3 of 4


    D I G I TA L T E C TO N I C D E S I G N eC AADe CONFERENCE HANNOVER 2000

    Figure. 2: Façade detail,Canadian Embassy in Berlin, digital model by Peter Marshall, University of Waterloo, 1998

    Notes
    [1] Frampton, Kenneth. Studies in Tectonic Culture, MIT Press, p. 192 , 1996.
    [2] Ibid., p. 207.
    [3] Sergeant, John, Frank Lloyd Wright’s Usonian Houses.Whitney, 1976.
    [4] Frampton, Kenneth. Studies in Tectonic Culture, MIT Press, p. 117 , 1996.
    [5] Hanna, Paul R. and Jean S., Frank Lloyd Wright’s Hanna House, MIT Press, 1981.

    BEESLEY/FORREST 2001 page 4 of 4


    References
    Citation for the above:
    Beesley, Philip and Thomas Seebohm. “Digital Tectonic Design.” Promise and Reality: State of the
    Art versus State of Practice in Computing for the Design and Planning Process. 18th eCAADe
    Conference Proceedings. Universität Weimar. Weimar. 2000.
    For further reading:
    Beesley, Philip, and Thomas Seebohm. "Digital tectonic design." Promise and Reality: State of the
    art versus state of practice in computing for the design and planning process, Proceedings of the
    18th eCAADe Conference. Vol. 23. 2000.

    You might also like