Scribd
Upload
162 views2 pages

TUTORIAL2C

This document contains 10 questions about modulation index, amplitude modulation (AM) waves, sidebands, bandwidth, power calculations for AM transmitters, and monitoring the output of an AM modulator using an oscilloscope. The questions cover key concepts in AM modulation including modulation index, percentage modulation, carrier power, sideband power, bandwidth, and power calculations for AM transmitters and antennas.

Uploaded by

Fauzan Ariq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
162 views2 pages

TUTORIAL2C

This document contains 10 questions about modulation index, amplitude modulation (AM) waves, sidebands, bandwidth, power calculations for AM transmitters, and monitoring the output of an AM modulator using an oscilloscope. The questions cover key concepts in AM modulation including modulation index, percentage modulation, carrier power, sideband power, bandwidth, and power calculations for AM transmitters and antennas.

Uploaded by

Fauzan Ariq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ELECTRONICS COMMUNICATION 1

LEB20103
TUTORIAL: CHAPTER 2c

1) Explain the term of modulation index. Provide the formula and graph signal in your
explanation.

2) An AM wave displayed on an oscillposcope has values of Vmax = 4.8V and Vmin =


2.5V. What is the percentage of the modulation?

3) To achieve 75percent modulation of the carrier of Vc = 50V, what is the amplitude of


the modulating signal needed?

4) The maximum peak to peak value of an AM wave is 45V. The peak to peak value of
the modulating signal is 20V. What is the percentage of the modulation.

5) Suppose that on an AM signal, the Vmaxpp value read from the graticule on the
oscilloscope screen is 5.9 division and Vminpp is 1.2 division.

a) What is the modulation index


b) Calculate the Vc, Vm and m if the vertical scale is 2V per division.

6) A standard AM broadcast station allowed to transmit modulating frequency up to


5kHz. If the AM station is transmitting on a frequency of 980kHz, compute the
maximum and the minimum upper and lower sidebands and the total bandwidth
occupied by the AM station.

7) An AM transmitter has a carrier power of 30W. The persentage of modulation is


85percent. Calculate :

a) Total power
b) The power in onesideband.
8) An antenna has an impedance of 40Ω. An unmodulated AM signal produces a current
of 4.8A. The modulation is 90percent. Calculate:
a) Carrier power
b) Total power
c) Sideband power
d) What is the power in one sideband .

9) An single sideband transmitter produces a peak to peak voltage of 178V across 75Ω
antenna load. What is the peak power?

10) An oscilloscope is used to monitor an output of a conventional AM modulator. The


input signal of the modulator are:

Determine :
a) Upper and lower side frequency
b) Modulation coefficient
c) Upper and lower sideband amplitude voltages
d) Maximum and minimum amplitude of AM modulated wave
e) Total transmitted power using conventional AM for 75Ω load.

You might also like