BlueMaxima’s

Flashpoint
User Manual
Meant for version 9.0 – “Glorious Sunset”
Requirements

• A computer running Windows 7 or higher, as thoroughly updated as possible.

◦ You may need the following redistributables (.NET 4.7 and Visual C++ 2015 x86). If
Flashpoint does not work, try installing them from the two URLs below. These should
already be installed in Windows 10.
▪ https://www.microsoft.com/en-us/download/details.aspx?id=48145
▪ https://www.microsoft.com/en-us/download/details.aspx?id=55170

• As much hard drive space as you need to extract the files. You cannot run Flashpoint from
inside the archive, you must extract it. You need to be able to read and write to the directory
you extract Flashpoint to – you can’t run it from a CD or DVD.
◦ The size required varies by version – several hundred gigabytes for Ultimate, and a few
gigabytes for Infinity. The more games you play with Infinity, the more free space you
will need on your hard drive. We recommend leaving at least 10GB of free space
available for Flashpoint, just to be safe.

• If you have antivirus software, you’ll need to exclude a folder from your antivirus’ control
panel before you extract Flashpoint, and then extract Flashpoint directly to it.
◦ This is not a requirement for every antivirus, but enough antivirus software will react to
Flashpoint to make it a requirement before troubleshooting. To cite a certain example,
Avast Antivirus, it will see Flashpoint as a virus and do something to it, to the point
where Flashpoint won’t work, and Avast will not tell you it happened, which will result
in Flashpoint not working at all until you re-extract it.
◦ If you’re using a third party firewall, you may also need to allow the “Legacy” and
“Server” folders of Flashpoint through the firewall as well.

Notices

Many webgames have been designed to only play on certain websites or require resources that can’t
be provided by a regular filesystem. As a result, Flashpoint utilizes a web server, that runs locally
on your computer, and software configured to point directly at said web server, to run the games.
This server is NOT public - it is not accessible by anyone else over the internet, it is not used to
track/collect data, and it does not compromise your security or privacy in any way. It runs on port
22500 on your computer when Flashpoint is running, and when you close Flashpoint, the server
closes; nothing is left running on your computer while Flashpoint is not running.

Software inside Flashpoint will also modify your system registry in order to support certain plugins,
as they require certain registry keys to exist to work. We use a piece of open source software called
the Flashpoint Secure Player to make these changes, then revert those changes once the software
running the plugin closes. Some software also requires the ability to run in administrator mode; you
will be prompted when this is required, and you will be offered the option to refuse.

2
Using Flashpoint

Flashpoint is a standalone program that launches all other software and web games; you pick which
game you want to play via the Launcher. Flashpoint is, by default, compressed into either a ZIP or
7Z archive, which will need to be extracted to somewhere on a hard drive with both read and write
access.

Once you extract the archive, Flashpoint can be started in two different ways:

Clicking this icon. Clicking the Flashpoint executable in the

“Launcher” folder.

The Start Flashpoint shortcut is provided for convenience. If you want to make a shortcut to
Flashpoint somewhere else on your computer, make a shortcut by right-clicking Flashpoint.exe,
making a shortcut from that, and moving the shortcut where you want it.

The first time you open Flashpoint, you may see a Windows Firewall window, which you should
allow either Apache or PHP through. If you don’t do this, the web server won’t be able to serve the
web games to our included software, which means Flashpoint won’t work.

Once you’ve started Flashpoint, the launcher you open should look something like this.

This is the Home tab, which is where Flashpoint

starts on each boot. The main links of interest
are across the top of the screen; these lead to
other tabs. On the Home page, you have
Random Picks down the bottom of the screen;
this picks five entries from across Flashpoint,
which will reset every time you visit the Home
tab or press the Re-Roll Picks button. You can
also filter by individual platform with the links
in the middle of the screen.

3
The tabs across the top of the launcher lead to the sections we’re about to talk about.

Games / Animations

Grid View (default in Ultimate) List View (default in Infinity)

The Games and Animations tabs contain the listings of every web game included in the collection.
To start a game, all you need to do is double-click on a game’s logo (Grid View) or listing (List
View). When you single or double-click a game, the right sidebar will show the metadata for the
game that we’ve collected, and a button that will allow you to play the game instead of needing to
double-click.

Entries will open in many different windows, depending on their platform (which you can identify
by the colorful logos that are in the bottom right of the Grid View, or on the left side of the List
View). We’ve made an effort to make games easy to click into and start playing; any games that are
more complicated than that will often have a Notes section in the right sidebar, or will pop up a
message in the middle of the screen in the most extreme cases.

Know that some entries require usage of special software that will only allow one entry to be open
at a time. While this isn’t consistent across Flashpoint, if you have one entry open and another will
refuse to open, try closing any entries you have open first.

You can search either listing using the bar up the

top of the screen. Typing anything in the bar and
pressing Enter will filter the entries shown. You
can click the X that replaces the magnifying
glass to reset the search. The two boxes to the
right will sort the list.

You can also search for particular metadata by

using (fieldname):(searchterm). For example,
developer:Louissi will search for any games
with “Louissi” in the Developer field. You can
even click on fields in the right sidebar, and
they’ll be automatically searched for.

4
The bar in the bottom right will allow you to swap between List and Grid view, and change the
displayed size of entries on the screen.

Playlists are listed on the left side of the screen. We include a series of playlists by default in
Flashpoint to get users started digging through the absolutely massive collection, and it is also
possible to make your own. Clicking any of the playlists will filter the entries in the middle of the
screen to just entries on the playlist, at which point you can double click them to launch them as
normal.

You can create a playlist by clicking “New Playlist” at the bottom of the list of playlists. You can
click on a playlist and click the pencil to edit the title, author and description (click to edit, press
Enter to confirm), click the question mark where the logos are to add a logo to the playlist, and to
add games, return to the All Games view (at the top of the playlists) and click & drag an entry into
the playlist you want to add entries to.

At the moment, you can’t reorder playlists, so the order you drag and drop entries into a playlist is
the order they’ll remain in the playlist. However, you can delete a game from a playlist by clicking
the entry, and doubleclicking the hexagon with a small cross in the top right corner. Do not do this
while in the All Games view; this will delete the entry from Flashpoint entirely. You can share
playlists with other players by using the ‘Export playlist to a file’ (the chest) button. Send this file to
another player, and they can import it with the Import Playlist button at the bottom of the playlist
list.

5
 If you don’t want to see the playlists or the metadata, the two buttons at the top
right corner of the window will remove the left and right sidebar respectively,
allowing the games list to fill the entire launcher window.

Clicking on a screenshot in the sidebar

will show it over the whole window;
you can click outside the screenshot to
make it go away, or click on the
screenshot to increase the size of the
preview in the launcher window.

Certain games have what we refer to as “additional

applications”, which are often alternative versions of
games, extras bundled with the original distributions of
the games, or other knick-knacks. They’ll usually be
self explanatory, and can be launched by just clicking
that Launch button.

To close Flashpoint, you can simply close the launcher, which will close the server running in the
background. Note that this will not close any open games; while this might be a benefit if you want
to finish up a game, there are certain games that may need to load level by level that will fail. As
such, we recommend keeping Flashpoint open until you finish playing any particular game.

6
Config

The Config tab is where you go to change certain settings related to Flashpoint. Please note that
most setting changes will require you to click the “Save and Restart” button at the bottom of the
window to restart Flashpoint and keep the settings. Settings are locked to that Flashpoint install – if
you extract a new version elsewhere it will have its own settings.

Extreme Games: Entries are determined to be ‘extreme’ if they have high-end violence, high-end
nudity, or otherwise very questionable content for less mature audiences. When you tick this setting,
the entries will appear. This setting starts off unticked on a default Flashpoint setup. If you have
young children that you don’t want finding this switch this easily, see the “Can I permanently
disable extreme games” question later on in the manual.

Enable Editing: This allows you to edit and delete entries in the launcher and see the Curate tab,
which is more used for people adding games to the collection. (This is not useful for people who are
here to play, and even then, you should not be using the Curate tab in a default Flashpoint
distribution.)

On Demand Images: By default, this grabs missing logos and screenshots from the internet when
needed for Infinity. You may want to disable this if you are low on space / have a slow hard drive /
have a slow internet connection.

Language: This will change the language of the launcher. The default is English. Translations have
been crowd-sourced, so they may be incorrect or inaccurate.

Flashpoint Path: This allows you to manually set the path of certain folders (mainly the database
and image locations) in the Flashpoint file set. By default, it’s set to look in the folder setup that
Flashpoint is using, so you shouldn’t need to change this setting.

Random Libraries: These allow you to change what libraries (in the case of default Flashpoint,
games and animations) turn up in the Random Picks on the Home tab.

Native Platforms: This option is for something which has not been followed through on as of this
manual. You shouldn’t need to touch it.

App Path Overrides: This allows you to replace certain included applications in Flashpoint with
other applications on a wide-scale without needing to edit the database. Most users should never
need to use this option.

Use Custom Title Bar: By default, the Flashpoint Launcher’s top bar blends in with the rest of the
launcher theme. Unticking this box will display a more Windows-like title bar.

Theme: Multiple themes are included with the launcher to customize its look. The default is Metal,
a slick dark theme, but there are other themes for looking like older versions of Windows and
Steam.

Logo Set: Each platform included in Flashpoint has its own unique logo to help it stand out in the
games list. This can be replaced by users, or changed by a theme. No logo sets are included by
default.

7
Show Developer Tab: This enables an extra tab that allows you to monitor the server and perform
other tasks for fiddling with the collection. Most of them are not useful for the casual user.

Server: This determines what server starts when Flashpoint starts; the Apache Webserver (used in
Ultimate) or the PHP Router (used in Infinity). You shouldn’t change this if you don’t know what
you’re doing; it’s set to the correct server by default depending on your version.

Metadata Server Host: This is for a feature that has not been completed; you shouldn’t need to
modify it.

Fallback Language: This determines what language the launcher will use when a certain line isn’t
translated in your selected language. You shouldn’t need to change this from English.

Extensions can be installed from external sources that add new functionality to the Launcher. We
won’t be covering any here – see their individual downloads for details.

The Logs tab is where Flashpoint keeps track of things like files loading and games opening and
closing. It’s good for debugging if you have a problem, but you shouldn’t need to look at it if
Flashpoint is running as expected.

8
Flashpoint Infinity

Flashpoint Infinity differs from Flashpoint Ultimate in many ways, and this part of the manual will
list them out.

• The Ultimate version contains several “Extras” folders that contain knick-knacks for certain
entries. These are usually launched by Additional Applications; as a result, certain
Additional Applications will not work with Infinity.

• You won’t start with logos and screenshots, but they’ll be downloaded on demand. You can
turn off this functionality in the previously mentioned Config tab.

• As it says on the website, Infinity will download entries as they’re played, instead of having
them included on the hard drive. There’s several results to this:
◦ Entries will download the first time you play them. You’ll have to wait for them to
download the first time. (On most Flash titles, this will let you watch many of their
unique loading bars.)
◦ They will stay on your hard drive after you’ve downloaded them, meaning if you want to
play them again, you can without downloading them again.
◦ Some entries require you to load more than one file, sometimes all at once, sometimes
over the course of the entry. As a result, if you play certain entries online, then go offline
without finishing them, you may run into trouble.
◦ Some entries may not load completely or properly the first time depending on many
conditions (internet speed, server speed, anything in between). If you fail loading an
entry, try restarting (or if it loads in the Basilisk browser, refreshing) the entry. You
might need to do this more than once. If a few retries doesn’t work, refer to the
Questions part of this manual.

• Overwriting older versions of Infinity is not a good idea, due to older versions potentially
being significantly different to newer ones. To upgrade Infinity, just delete the old version
and move onto the new one (but don’t forget to export your old playlists first!)

• Due to technological limitations, certain entries from Ultimate will not work in Infinity at
all. These entries are hidden from Infinity by default. This may also apply to certain titles we
haven’t been able to mark as broken in Infinity yet; if you find one that doesn’t work after
all relevant troubleshooting, please let us know.

9
Questions & Answers

Can I permanently disable extreme games?

If you open the file “config.json” in the Launcher folder, and change the “true” next to
“disableExtremeGames” to “false”, then save the file, it will hide the extreme games and the switch
to turn them on in the Launcher. This will not remove the actual games themselves from an
Ultimate install, however.

Where is my save data kept for games?

Flashpoint doesn’t change how the technologies save data at all, so they save to their normal
directories, which you can see some details on here. This will remain on the computer it was created
on even if you move Flashpoint onto a flash drive and to another computer; we include a batch file
set that can back up and restore save data for Flash specifically in the FPSoftware folder.

Is every entry in the collection unhacked?

Not exactly. We’ve tried our best to have all of our entries unhacked, but some simply need a bit of
tweaking to work on our setup. You can see what games are hacked by looking at the Status line in
the sidebar.

Is the collection virus-free?

We try our best to keep Flashpoint as virus free as possible, although individual files may set off
oversensitive antiviruses.

I can’t find a specific game!

There’s a few things you can try.

• Try searching just a partial title instead of a full title (example: “Infiltrating” for “Infiltrating
the Airship”). Sometimes games are spelt in different ways than you might expect in the
project’s metadata.

• Try enabling Extreme games in the Config tab. Some games have been marked with it due
to their content.

I’m having a problem / something doesn’t work!

Here’s a list of troubleshooting tips.

• Restart your computer. Sometimes it helps.

• Read the Requirements point about antiviruses again on page 2. No, seriously. Antiviruses
sometimes really overreact to Flashpoint.

• If you have Flashpoint in OneDrive or any other network location, move it to a local folder
such as "C:\Flashpoint". Same goes for user folders like your Documents or Desktop; try a
location like "C:\Flashpoint" instead.

10
 • Make sure that you have Flashpoint in a path that contains only alphanumeric characters
(letters and numbers).

• Try running the launcher as an Administrator (right-click Flashpoint.exe in the Launcher

directory).

• Try disabling any VPNs, firewalls or antiviruses entirely to rule out they’re not doing
something shifty, even with exclusions.

• If you extracted Flashpoint with WinRAR and nothing is working, try extracting again with
7-Zip instead. No, seriously, again, WinRAR sometimes just refuses to extract Flashpoint
properly and we don’t know why.

• Make sure no internet-focused applications on your PC are using port 22500. We don’t
know of any that do, but it’s worth being thorough.

Ask on our Discord (see Contact) if you can’t get it working after this troubleshooting, and we’ll try
and help. We’ll probably tell you to do the troubleshooting again, to be on the safe side.

I have another question!

We have an extended FAQ page on our website.

Contact

The Flashpoint website is where we have our most up to date articles on the project, links to the
latest releases, and more info about what we do.

Our Discord community is where we do all our work; add games to the collection, test for bugs, and
make enhancements to the software. If you have a problem, game suggestion or are willing to help,
this is the place to be.

If you absolutely need to talk about something more sensitive, you can email us at the following
address: flashpoint (at) bluemaxima (dot) org. Troubleshooting and game requests will be ignored
except in special circumstances.

11