Text Books: Book No. Title Author (S) Edition: ST ND TH
Text Books: Book No. Title Author (S) Edition: ST ND TH
Text Books: Book No. Title Author (S) Edition: ST ND TH
Interference of light:
If two beams of light cross each other at a certain point, in the region of cross over where
both the beams are acting simultaneously, according to superposition principle a
modification in their intensity is expected. The resultant intensity will be either great or
less than that which would be given by one beam alone. This modification of intensity
due to superposition of two or more beams of light is known as interference of light.
Superposition principle:
Suppose two trains cross each other at a certain point and let y1 be the displacement of
the point produced by the first wave in the absence of second wave. If y2 be the
displacement of the same point produced by the second wave in the absence of the first
wave, then the resultant displacement y of the point due to the two waves acting together
is expressed by
y = y1 + y2..............................................................................(1)
If the two waves cross each other in phase then Eq. (1) can be written as-
y = y1 + y2 ............................................................................(2)
If the two waves cross each other out of phase. Then Eq. (1) can be written as-
y = y1 ~ y2 ...................................................(3)
Dr. H. M. A. R. Maruf 1
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
From equation (2) we can say that, if the two individual displacements are in the same
direction, the resultant displacement will be enhanced. So, two waves reinforce each
other and are said to produce constructive interference. For example, in [Fig-1.1 (a)], two
waves are of the same frequency but of different amplitudes, say a and b where a > b.
when they reach a certain point in phase each other, then resultant displacement or
amplitude is equal to the sum of the two amplitude i.e., (a + b).
From equation (3) we can say that, if the two individual displacements are in the opposite
direction, the resultant displacement will be diminished. So, two waves neutralize each
other and are said to produce destructive interference. For example, in Fig.-[1.1(b)],
two waves are π radians or 1800 out of phase with each other, the resultant amplitude is
equal to the difference of the two amplitudes i.e., (a-b). If in addition, a = b, then the
resultant amplitude is zero.
Uses of interference:
Coherent Sources:
Two sources are said to be coherent if they emit light waves of the same frequency,
nearly the same amplitude and are always in phase with each other. It means that the two
sources must emit radiations of the same colour (wavelength). In actual practice it is not
possible to have two independent sources which are coherent. But for experimental
purposes, two virtual sources formed from a single source can act as coherent sources.
If the path difference between the two waves is , the phase difference = 2
Suppose for a path difference x, the phase difference is .
For a path difference , the phase difference is = 2
According to unitary method, we can write
The path difference is equal to phase difference 2
2
1
2
x x
2
So, phase difference x
2
Or, phase difference path difference(x)
x
Or, .
2
Dr. H. M. A. R. Maruf 3
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
Interference of two light waves: analytical treatment
Consider a monochromatic source of light S emitting waves of wavelength λ and two slits
A and B (Fig.-1.2). A and B are equivalent from S and act as two virtual sources. Let a be
the amplitude of the waves. The phase difference between the two waves reaching the
point P, at any instant, is δ.
Fig.-1.2
Let y1 be the displacement of the particle P due to waves emanating from the source A
alone (in the absence of waves coming from B) at any instant of time.
y1 a sin t .................................................(1)
Let y2 be the displacement of the particle P due to waves emanating from the source B
alone (in the absence of waves coming from A) at any of time.
y2 a sin ( t ) .........................................(2)
If y be the resultant displacement of the particle P at that instant of time then according to
principle of superposition-
y1 y2 a sin t a sin ( t )
a sin t a sin t cos a cos t sin
a sin t ( 1 cos ) a cos t sin …………………(3)
Taking a ( 1 cos ) R cos …………………(4)
And a sin R sin …………………(5)
Dr. H. M. A. R. Maruf 4
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
y R sin t cos R cos t sin
R sin ( t )
which represents the equation of simple harmonic vibration of amplitude R. Squaring (4)
and (5) and adding
Dr. H. M. A. R. Maruf 5
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
Fig.-1.3
From equation (7), it is found that the intensity at bright points is 4a2 and at dark points it
is zero. According to the law of conservation of energy, the energy can not be destroyed.
Here also the energy is not destroyed but only transferred form the points of minimum
intensity to the points of maximum intensity.
Fig.-1.3a
Dr. H. M. A. R. Maruf 6
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
reach the slits S1 and S2. As the slits S1 and S2 are equidistant from S the waves reach the
slits at the same time i.e., S1 and S2 are on the same wavefront. A train of secondary
wavelets, having the same amplitude, velocity, wavefront and precisely the same phase at
the start, therefore, diverge to the right from both of these slits. Let the crest and the
trough in each wave be represented by continuous and dotted circular arcs respectively.
Furthermore, let the points where a crest of one wave is superposed on the crest of
another wave or a trough of one wave is superposed on the trough of another wave be
marked by P1 and P2 respectively and the points where the crest of one wave is
superposed on the trough of another wave be marked by P3. If a screen be placed at a
certain distance from the slits S1 and S2, solid lines connecting the points marked P1s and
P2s will intersect the screen at points Bo, B1. Since the resultant intensity along these lines
is always maximum (constructive interference), the points Bo, B1 will appear as bright
lines on the screen. Similarly D1s, the points of intersection of lines, connecting the
points marked P3s with the screen will represent points of zero intensity (destructive
interference) and consequently appear on the screen as dark lines. Thus the result of
interference between waves coming from the slits S1 and S2 will appear on the screen as
alternate bright and dark lines. As long as the experimental arrangement remains
undisturbed, the alternate bright and dark lines on the screen remain stationary. This is
known as interference pattern. That the observed pattern is truly due to interference of
two waves of light can be demonstrated by covering one of the slits. Then the well
defined dark and bright lines on the screen are replaced by a pattern much coarser due to
diffraction of light by the uncovered single light. Thus a point on the screen, bright when
only one slit is uncovered changes to dark when both the slits are uncovered. This cannot
be explained on the basis of corpuscular theory of light, but can be readily explained on
the basis of interference of two waves of light. The dark and bright lines are usually
referred to as fringes.
Consider a narrow monochromatic source S and two slits A and B, equidistance form S.
A and B act as two coherent sources separated by a distance d. Let a screen be placed at a
distance D from the coherent sources. The point C on the screen is equidistance form A
and B. Therefore, the path difference between the two waves is zero. Thus, the point C
has maximum intensity.
Dr. H. M. A. R. Maruf 7
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
X
X
Fig.-1.4
Consider a point P at a distance x from C. The wavelength reaches at the point P from A
and B.
d d
Here, PQ = x , PR = x
2 2
2 d
2
2 d
2
(AP) = D x ,
2
(BP) = D x
2
2 2
d
2
d
2
(BP)2 – (AP)2 = D 2 x D 2 x
2 2
(BP-AP) (BP +AP) = 2xd
2 xd
BP – AP =
BP AP
But BP = AP = D (approximately)
xd
Path difference =
D
2 xd
Phase difference =
D
xd
n
D
Where n = 0, 1, 2, 3, … … …
Dr. H. M. A. R. Maruf 8
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
n D
Or, x n
d
This equation gives the distance of the bright fringe form the point C. At C, the path
difference is zero and a bright fringe is formed.
D
When n = 1, x1
d
2 D
n = 2, x2
d
3D
n = 3, x3
d
Therefore the distance between any two consecutive bright fringes
2 D D D
x 2 x1 ……………(1)
d d d
Thus the distance between any two consecutive bright fringes is same or all bright fringes
are equally spaced.
(2) Dark fringes:
If the path difference is an odd number multiple of half wavelength λ, the point P is dark.
2n 1
xd
D 2
Where n = 0, 1, 2, 3, ..............................
(2n 1)D
Or, x n
2d
This equation gives the distance of the dark fringe form the point C.
3D
When n = 1, x1
2d
5D
n = 2, x2
2d
7D
n = 3, x3
2d
Therefore the distance between any two consecutive bright fringes
5D 3D D
x2 x1 ………………(2)
2d 2d d
Thus the distance between any two consecutive dark fringes is same or all dark fringes
are equally spaced.
Moreover, from equations (1) and (2), it is clear that the width of the bright fringe is
equal to the width of the dark fringe. This distance between any two consecutive bright or
dark fringes is called the fringe-width (X).
Dr. H. M. A. R. Maruf 9
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
D
X
d
From this equation it can be seen that
Xd
D
Thus if the fringe-width, the distance of separation of the sources and the distance of the
screen from the sources are known, then the phenomenon of interference can be
employed to determine the wavelength of unknown monochromatic light.
Everyone is familiar with the brilliant colours produced by a thin film of oil on the
surface of water and a thin film of a soap bubble. The explanation of the origin of this
colour phenomenon was given by Young, in 1802, in terms of the interference of light
waves reflected from the upper and the lower surface of the thin film. It has been
observed that interference in the case of thin film takes place due to both reflected as well
as transmitted light.
Interference due to reflected light from a plane parallel (thin) film:
Consider transparent film of thickness t and refractive index , bounded by two parallel
surfaces MN and PQ. A ray AB of monochromatic light is incident on the upper (Fig.-
1.5) surface at the point B. A part of it is reflected along BC and a part is refracted along
BD. The refracted beam is again partly reflected at the point D back into the medium
along DE and the rest refracts into the surrounding medium along DV. The ray along DE
suffers both reflection and refraction at point E on the upper surface MN. The refracted
ray goes along EF. The difference in path between BC and EF can be calculated. Draw,
El normal to BC and BR normal to DE. Also produce ED to meet BT produced at S.
Dr. H. M. A. R. Maruf 10
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
V
Let the angle of incidence and refraction be i and r respectively. The optical path difference
x = µ (BD + DE) – BL
= µ (BD + DR + RE) – BL ............................(1)
Also, BD=DE
sin i BL BE BL
Here, µ =
sin r RE BE RE
Or, BL=µRE .............................(2)
It should be remembered that the interference pattern will not be perfect because the
amplitudes of the rays BC and EF are not same.
Interference due to reflected light from a plane of varying thickness (wedge shaped film):
Suppose the film is not parallel sided but is in the shape of thin wedge i.e., its surfaces
make an angle θ with each other. Consider the film to be illuminated with monochromatic
light. The incident light wave propagating along AB will give rise to two light waves- the
directly reflected ray along BR and the internally reflected ray along B1R1. The rays BR
and B1R1 are, therefore, coherent and capable of producing interference.
Dr. H. M. A. R. Maruf 12
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
G H
Q
Fig.-1.6: Interference due to reflected light (thin film of varying thickness)
To derive an expression for the optical path difference between them, let us draw an arc
with the optical path difference between them, let us draw an arc with the point Q as the
center and QB1 as the radius. The arc B1D will be approximately straight and
perpendicular to BR. From points B1 and D onwards, the two waves or rays travel equal
distances. Let us also draw a perpendicular B1E from B1 on BC. The optical path
difference x, between the waves BR and B1R1 in reaching the arc B1D from B, the point
of their origination, is expressed by
x = µ (BC + CB1) – BD
x = µ (BE + EC + CB1) – BD....................(1)
Now the angle DB1B = i = angle of incident and
Angle BB1E = r = angle of refraction
BD BE
sin i and sin r
BB1 BB1
sin i BD
Hence = µ =
sin r BE
Or, BD = µ BE..............................(2)
Dr. H. M. A. R. Maruf 13
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
CNB =
PCB = CBN + CNB = + r and PCB1 = PCB = + r
In the fig-1.6, B1M is perpendicular from B1 of the lower surface of the film and BC
when produced further intersects it at O. Thus we have the relation
B1OC = PCB = + r.
Also CB1O = PCB1 = θ+r = B1OC. Thus B1OC is an isosceles triangle. Hence
CB1 = CO.
The path difference x, therefore, varies both on account of changing thickness as well
changing angle of incidence, provided the broad light source is at a finite distance from
the film. Equation (5) does not, however, represent the total path difference between the
rays. Now we have to consider a path difference of introduced as a result of reflection
2
at the point B which represents reflection at a surface backed by a denser medium. Thus
the total path difference between the rays is
x = 2t μ cos (θ+r)
2
Therefore, for constructive interference or brightness
2t cos r n
2
2t cos r 2n 1 ...........................Bright
2
In terms of phase difference, there will be constructive interference or brightness, when
the total phase difference
2
(2n 1)
2
(2n 1) …………………………………Bright
Dr. H. M. A. R. Maruf 14
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
2tµ cos (θ+r) = n ……………………………..dark
In terms of phase difference, there will be destructive interference or darkness, when the
total phase difference
2
n 2 n ……………………………..dark
Where n = 0, 1, 2, 3, … … …etc.
Consider the wedge shaped film to be illuminated by a parallel beam of monochromatic
light of wavelength λ. Then the angle of incidence i, will be constant at every point of the
film and so will be r, the angle of refraction. The total optical path difference will,
therefore, be only due to variation of the thickness, t, from point to point of the film. At
the edge of the wedge, since t = 0, the film appears perfectly dark and the two interfering
waves are π out of phase. At distances from the edge where the total path difference
3 5
x , , ,... ... ...etc. the film is bright.
2 2 2
While at distances where
x , 2 , 3 , 5 , ... ... ... etc. the film appears to be dark.
Thus as we go along the wedge in the direction of increasing thickness there will be
alternate dark and bright bands parallel to the edge of the film.
Consider two plane surfaces OA and OB inclined at an angle and enclosing a wedge
shaped air film. The thickness of the air film increase from O to A (Fig-1.7). When the air
film is viewed with reflected monochromatic light, a system of equidistance interference
fringes is observed which are parallel to the line of intersection of the two surfaces. The
effect is best observed when the angle of incidence is small.
Dr. H. M. A. R. Maruf 15
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
Suppose the rays are incident normally on the film which is in air, i.e. μ = 1. Then the
angle of refraction is very small and since angle θ is also very small cos (θ+r) = 1. Under
this condition the nth bright fringe occurs at the point Pn where the thickness of the film,
t = PnQn. (Fig-1.7a).
Applying the relation for bright fringe (for reflected light),
2t cos r 2n 1
2
2n Q n 2n 1 [µ = 1, cos (θ+r) = 1]
2
The next bright fringe (n+1) will occur at Pn+1 such that
2n 1Q n 1 [2(n 1) 1]
2
Subtracting
n 1Q n 1 n Q n
2
Thus the next bright fringe will occur at the point where the air-film thickness has
increase by . Suppose Pn+m represents the position of the (n+m)th bright fringe. Hence,
2
there will be m bright fringes between Pn and Pn+m.
n m Q n m n Q n m
2
Let the distance QnQn+m = x
Then the angle of inclination θ, between OA and OB is
Pn m Q n m - Pn Q n m
QnQn m 2x
m
Or, x
2
Since x is the distance corresponding to m fringes, the fringe width
x
m 2
Newton’s rings:
When a plano-convex or bi-convex lens of large radius of curvature is placed on a glass
plate p, a thin air film of progressively increasing thickness in all directions form the
point of contact between the lens and the glass plate is very easily formed (Fig.-1.9 ) The
air film thus possesses a radial symmetry about the point of contact. When it is
illuminated normally with monochromatic light, an interference pattern consisting of a
Dr. H. M. A. R. Maruf 16
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
series of alternate dark and bright circular rings, concentric with the point of contact is
observe (Fig-1.8). The fringes are the loci of points of equal optical film thickness and
gradually become narrower as their radii increase until the eye or the magnifying
instrument can no longer separate them. The rings are localized in the air film. Since the
phenomenon was first examined in detail by Newton, the rings are termed as Newton’s
rings.
(a) (b)
Fig.-1.8: (a) Newton’s rings experiment apparatus, (b) Newton’s rings
Dr. H. M. A. R. Maruf 17
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
The two reflected rays BC and BDEF are derived from the same source and are coherent.
They will produce constructive or destructive interference depending on their path
difference. Let t be the thickness of the film at the point E and let the tangent to the
convex surface at the point be inclined at an angle θ with the horizontal. Then the optical
path difference between the two rays is given by
2t cos( r )
2
Where r is the angle of refraction at the point B and μ is the refractive index of the film
with respect to air.
Thus the two rays will interfere constructively when
2t cos( r ) n
2
2t cos( r ) (2n 1)
.............................................Bright (1)
2
The minus sing has been chosen purposely since n con not have a value of zero for bright
fringes seen in reflected light.
The rays will interfere destructively when
2t cos( r ) (2n 1)
2 2
2t cos( r ) n ..............................................Dark (2)
λ is the wavelength of light in air.
In practice, however, a thin lens of extremely small curvature is used in order to keep the
film enclosed between the lens and the plane glass plate extremely thin. As a
consequence, the angle θ becomes negligibly small as compared to r. Furthermore, the
experimental arrangement is so designed (Fig-1.10) that the light is incident almost
Dr. H. M. A. R. Maruf 18
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
normally on the film and is viewed from nearly normal directions by reflected light, so
that cos ( r) = 1. Accordingly eqns. (1) and (2) reduce to
2t (2n 1) ………………………….Bright (3)
2
And
2t n ………..……………………….Dark (4)
Let us now compute the radius of any ring. Let R be the radius of curvature of the convex
surface which rests on the plane glass surface (Fig.-1.10). From the right angled triangle
OFB1, we get the relation
R 2 rn2 (R - t)2
rn2 2Rt t 2
Where rn is the radius of the circular ring corresponding to the constant film thickness t.
As outlined above, the condition of the experiment makes t extremely small; so to a
sufficient degree of accuracy, t2 may be neglected compare to 2Rt. Then
rn2
t
2R
Substituting the value of t in the above expressions [(3) and (4)] for bright and dark rings,
we have
R
rn2 (2n - 1) …………………………….Bright (5)
2
nR
And rn2 …………………………….…Dark (6)
The square of the diameters of the bright and dark rings are, therefore, given by the
expressions
R
D 2n 2(2n - 1) …………………………….Bright (7)
4nR
D 2n ………………………………..…Dark (8)
Thus the diameters of the different bright rings may be written as
2R
1st ring, D1 1
2R
2nd ring, D2 3
Dr. H. M. A. R. Maruf 19
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
2R
3rd ring, D3 5 and so on.
Hence it can be seen that the diameters (also radii) of bright rings are proportional to the
square root of the odd natural numbers.
Similarly, the diameters of the different dark rings can be written as
Central ring D0 = 0
R
1st ring, D1 2 1
R
2nd ring, D2 2 2
R
3rd ring, D3 2 3 and so on.
It is obvious that the diameters (also radii) of the dark rings are proportional to the square
root of the natural numbers.
At the point of contact of the lens and the glass plate, t = 0; therefore, the total phase
difference between directly and internally reflected rays reduces to π. As a
consequence, when Newton’s rings are viewed in reflected light, the central spot
appears to be dark. This central spot is surrounded alternately by a large number of
bright and dark rings. This is very interesting result. How could you get bright at
central spot?
If we consider the difference in diameters of the 5th and 4th dark rings, then
D5 - D 4 2 5- 4 R
0.46
R
D17 - D16 2 17 - 16 R
0.26
R
Thus it is clear that the alternate bright and dark rings surrounding the central dark spot in
Newton’s rings gradually become narrower as their radii increases.
This is also very interesting result. Do you know why it is happened?
Determination of wavelength:
In the laboratory, the diameters of the Newton’s rings can be measured with traveling
microscope. Usually a little away from the centre, a bright (or dark) ring is chosen which
Dr. H. M. A. R. Maruf 20
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
is clearly visible and its diameter measured. Let it can be the nth order ring. For an air
film μ = 1. Then we have
D2n 2(2n - 1)R …………………………….Bright (9)
and
D2n 4nR ………………………………..…Dark (10)
The wavelength of the monochromatic light employed to illuminate the film can be
computed either of the above equations, provided R is known.
However, in actual practice, another ring, p rings from this ring onwards, is selected. The
diameter of this (n+p)th ring is also measured. Then we have
D2n p 2 [2(n p) 1] R
D 2n p - D 2n
Or, …………………………..(13)
4 pR
Thus, if the radius of curvature of the surface of the lens is known the eqn. (13) can be
used to determine the wavelength of the light used.
Dr. H. M. A. R. Maruf 21
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
Fig.-1.11: Refractive index of a liquid with Newton’s rings
It is possible to determine the refractive index of a liquid by Newton’s rings method. The
diameters of two particular rings, say the nth and (n + p)th, obtained in Newton’s rings
with an air film, are measured. The difference in diameters of the two rings is
(D2n p - D2n )air 4 pR ……………………..(15)
Then a drop of liquid, whose refractive index is to be measured, is carefully introduced
into the air film. This liquid is drawn in at the centre by the capillary action forming a
liquid film between the lens and the plate. When the film is illuminated with the same
monochromatic light, another set of Newton’s rings is obtained. The diameters of the
same two rings (nth and (n + p)th) are then measured. The difference in diameters of the
two rings for the two films are
4 pR 4 pR
(D2n p - D 2n )liquid ;
(D - D2n )liquid
2
np
Mathematical problem:
Dr. H. M. A. R. Maruf 22
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
Solution:
D
X
d
D 6 10-7 1
or, d 4
1.2 10-3 m 1.2 mm.
X 5 10
2. Two straight and narrow parallel slits 1mm apart are illuminated by monochromatic
light. Fringes formed on the screen held at a distance of 100 cm from the slits are
0.50 mm apart. Calculate the wavelength of light.
Solution:
D
X
d
X d 5 10-4 1 103
or, 5 10-7 m 5000 Å.
D 1
3. In Young’s double slit experiment the separation of the slits is 1.9 mm and the fringe
spacing is 0.31 mm at a distance of 1 m from the slits. Calculate the wavelength of light.
Solution:
D
X
d
X d 3.1 10-4 1.9 10 3
or, 5.89 10-7 m 5890 Å.
D 1
Dr. H. M. A. R. Maruf 23
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
4. Newton’s rings are observed by keeping a spherical surface of 100 cm radius on a
plane glass plate. If the diameter of the 15th bright ring is 0.590 cm and the diameter of
the 5th ring is 0.336 cm, what is the wavelength of light used?
Solution:
Mathematical Problem:
Example: 27.1, 27.4, 27.16-27.27.
A Text Book of Optics- N. Subrahmanyam, Brijlal (22nd Edition)
Mathematical Problem:
Example: 8.1-8.4, 8.6, 8.7, 8.8, 8.47-8.56.
Exercises
1. What is mean by interference of light? Explain.
2. What do you mean by coherent sources? Derive a relation between path difference and
Phase difference.
3. State the fundamental conditions for the production of interference fringes.
4. Discuss interference of light analytically and obtain the conditions of maximum and
minimum intensities.
5. What do you mean by fringe width? Show that for bright and dark fringe, the fringe
D
width is X , where the symbols have their usual meaning.
d
or,
Dr. H. M. A. R. Maruf 24
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com
5. Prove that the distance between two successive bright fringes formed in Young’s
D
experiment is given by , where the symbols have their usual meaning.
d
6. For both constructive and destructive interference derive an expression of phase
difference due to reflected light from a plane parallel (thin) film.
or,
6. Establish the expression of phase difference for both constructive and destructive
interference due to reflected light from a plane parallel (thin) film.
7. Describe and explain the formation of Newton’s rings in the reflected light. Show that
(i) the diameters (also radii) of bright rings are proportional to the square root of the odd
natural numbers and diameters (also radii) of the dark rings are proportional to the square
root of the natural numbers. (ii) Account for the perfect blackness of the central spot in
Newton’s rings. (iii) What will happen if a little water is introduced between the lens and
glass plate? (iv) Show that the alternate bright and dark rings surrounding the central dark
spot in Newton’s rings gradually become narrower as their radii increases.
or,
7. Explain the formation of Newton’s rings. Describe with necessary theory the Newton’s
rings method of measuring wavelength of monochromatic light.
8. Describe the phenomena of interference due to reflected light from a plane of varying
thickness (wedge shaped film).
Dr. H. M. A. R. Maruf 25
Department of Physics, CUET
E-mail: hasnatmaruf@gmail.com