Site Sharing

Capacity Site Sharing

Technology Overlays
Multi-Services Multi-Services
Site Sharing
Multi-Services Spectral Efficiency
N e w Spectrum
Site Approvals

Base Station Antenna

Product Guide
• Stadium and Multibeam Antennas
• Low Band Antennas
• High Band Antennas
• Multi-Band Antennas
 Stadium and Multibeam Antennas
Stadium and
Multibeam Antenna
Selection Guide
Stadium and Multibeam Antennas

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

2x9NPA2010F 1710–2170 VPOL ±4° 27.0 5 5.8 18 30 16 1.43:1 300 140 / 308.6 1771 / 69.7 1486 / 58.5
5NPX1006F 1710–2170 ±45° 6 23.0 11 11.0 18 30 25 1.43:1 300 30 / 66.1 890 / 35 865 / 34.1
790–960 VPOL 0 11.0 55 55.5 - 38 - 1.5:1 50
CNLPA3055F 1710–2170 VPOL 0 11.1 50 49.5 - 43 - 1.5:1 50 30 / 66.1 850 / 33.5 1350 / 53.1
2300–2690 VPOL 0 11.7 46 46.3 - 45 - 1.5:1 50
2CPX208M-V1 824–960 ±45° 0–10 18.5 35 9.5 18 25 25 1.29:1 500 32 / 70.5 2090 / 82.3 510 / 20.1
2CPX208R-V1 824–960 ±45° 0–10 18.5 35 9.5 18 25 25 1.3:1 500 32.5 / 71.7 2090 / 82.3 504 / 19.8
2NPX210R-V1 1710–2170 ±45° 0–10 19.2 34 6.8 18 30 22 1.43:1 300 18.5 / 40.8 1330 / 52.4 370 / 14.7
698–894 ±45° 0–10 14.5 33 21.0 15 20 22 1.43:1 500
2UNPX203.6R2 29.5 / 65 1745 / 68.7 564 / 22.2
1710–2170 ±45° 0–10 17.5 35 11.0 15 30 20 1.43:1 300
HBXX-3817TB1-VTM 1710–2180 ±45° 0–10 19.3 34 6.7 21 29 30 1.4:1 250 16.5 / 36.4 1390 / 54.7 301 / 11.9

Note: Specifications are subject to change without notice. See www.commscope.com for the most current information.
Product Specifications
2x9NPA2010F
Argus® Multibeam Antenna, 1710–2170 MHz, 2x9 Beam Panel 
Antenna for Event Coverage. Two rows of beams spaced 8° in 
elevation (one set of beams 4° up and one set of beams 4° 
down) and 5° in azimuth. Upper and lower beams displaced in 
azimuth by 2.5°. 

Electrical Specifications
Frequency Band, MHz 1710–1920 1920–2170
Gain, dBi 25.0 27.0
Beamwidth, Horizontal, degrees 6 5
Beamwidth, Vertical, degrees 7.2 5.8
USLS, dB 18 18
Front­to­Back Ratio at 180°, dB 30 30
Isolation, dB 16 16
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 300 300
Polarization ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | ASA 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 18 
Wind Loading, maximum  2800.0 N @ 160 km/h 
629.5 lbf @ 160 km/h 
Antenna Dimensions, L x W x D  1771.0 mm x 1486.0 mm x 283.0 mm | 69.7 in x 58.5 in x 11.1 in 
Net Weight  140.0 kg | 308.6 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 17, 2014 1
April 16, 2014
Product Specifications
5NPX1006F
Argus® Multibeam Antenna, 1710–2170 MHz, 5x 10­14° 
horizontal beamwidth, fixed electrical tilt 

Electrical Specifications
Frequency Band, MHz 1710–1920 1920–2170
Gain, dBi 22.0 23.0
Beamwidth, Horizontal, degrees 12 11
Beamwidth, Vertical, degrees 12.0 11.0
Beam Tilt, degrees 6 6
USLS, dB 18 18
Front­to­Back Ratio at 180°, dB 30 30
Isolation, dB 25 25
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 300 300
Polarization ±45° ±45°

Mechanical Specifications
Color | Radome Material  Gray | ASA, UV stabilized 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 10 
Wind Loading, maximum  1060.0 N @ 160 km/h 
238.3 lbf @ 160 km/h 
Antenna Dimensions, L x W x D  890.0 mm x 865.0 mm x 250.0 mm | 35.0 in x 34.1 in x 9.8 in 
Net Weight  30.0 kg | 66.1 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: April 15, 2014 2
April 16, 2014
Product Specifications
CNLPA3055F
Argus® Stadium Tri­band Antenna, 790–960, 1710–2170, and 
2300–2690 MHz, 50° horizontal beam. This triband antenna 
produces rectangular patterns with sharp cutoff for illuminating 
a section of the crowd. The three bands are internally triplexed, 
allowing a single connector interface to be used. 

Electrical Specifications
Frequency Band, MHz 790–960 1710–2170 2300–2690
Gain by all Beam Tilts, average, dBi 11.0 11.1 11.7
Gain by all Beam Tilts Tolerance, dB ±0.8 ±0.7 ±0.6
Beamwidth, Horizontal, degrees 55 50 46
Beamwidth, Horizontal at 20 dB, degrees 91 83 75
Beamwidth, Horizontal Tolerance, degrees ±4.7 ±5.2 ±2.4
Beamwidth, Vertical, degrees 55.5 49.5 46.3
Beamwidth, Vertical Tolerance, degrees ±5.5 ±5.1 ±2.3
Beam Tilt, degrees 0 0 0
Front­to­Back Ratio at 180°, dB 38 43 45
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power per Port, maximum, watts 50 50 50
Polarization Vertical Vertical Vertical

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 1 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  850.0 mm x 1350.0 mm x 120.0 mm | 33.5 in x 53.1 in x 4.7 in 
Net Weight  30.0 kg | 66.1 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 17, 2014 3
April 16, 2014
Product Specifications
2CPX208M
2CPX208M--V1
Argus® Twin Beam Antenna, 824–960 MHz, 37° horizontal 
beamwidth, with manual electrical tilt (not upgradeable) 

Electrical Specifications
Frequency Band, MHz 824–890 890–960
Gain, dBi 18.0 18.5
Beam Centers, Horizontal, degrees ±27 ±27
Beamwidth, Horizontal, degrees 39 35
Beamwidth, Vertical, degrees 10.0 9.5
Beam Tilt, degrees 0–10 0–10
USLS, dB 18 18
Front­to­Back Ratio at 180°, dB 25 25
Isolation, dB 25 25
VSWR | Return Loss, dB 1.29 | 18.0 1.29 | 18.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 500 500
Polarization ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  1500.0 N @ 160 km/h 
337.2 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2090.0 mm x 510.0 mm x 108.0 mm | 82.3 in x 20.1 in x 4.3 in 
Net Weight  32.0 kg | 70.5 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 17, 2014 4
April 16, 2014
Product Specifications
2CPX208R
2CPX208R--V1
Argus® Twin Beam Antenna, 824–960 MHz, 37° horizontal 
beamwidth, internal electrical tilt with manual override. 

Electrical Specifications
Frequency Band, MHz 824–890 890–960
Gain, dBi 18.0 18.5
Beam Centers, Horizontal, degrees ±27 ±27
Beamwidth, Horizontal, degrees 39 35
Beamwidth, Vertical, degrees 10.0 9.5
Beam Tilt, degrees 0–10 0–10
USLS, dB 18 18
Front­to­Back Ratio at 180°, dB 25 25
Isolation, dB 25 25
VSWR | Return Loss, dB 1.3 | 17.7 1.3 | 17.7
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 500 500
Polarization ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  1500.0 N @ 160 km/h 
337.2 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2090.0 mm x 504.0 mm x 118.0 mm | 82.3 in x 19.8 in x 4.6 in 
Net Weight  32.5 kg | 71.7 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 5
April 16, 2014
Product Specifications
2NPX210R
2NPX210R--V1
Argus® Twin Beam Antenna, 1710–2170 MHz, 35° horizontal 
beamwidth, internal electrical tilt with manual override. 
Horizontal Beamwidth at ±31°. 

Electrical Specifications
Frequency Band, MHz 1710–1920 1920–2170
Gain, dBi 18.2 19.2
Beamwidth, Horizontal, degrees 40 34
Beamwidth, Vertical, degrees 7.6 6.8
Beam Tilt, degrees 0–10 0–10
USLS, dB 18 18
Front­to­Back Ratio at 180°, dB 30 30
Isolation, dB 22 22
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 300 300
Polarization ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  720.0 N @ 160 km/h 
161.9 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  1330.0 mm x 370.0 mm x 120.0 mm | 52.4 in x 14.6 in x 4.7 in 
Net Weight  18.5 kg | 40.8 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 6
April 16, 2014
Product Specifications
2UNPX203.6R2
Argus® Dual Band Twin Beam Antenna, 698–894 and 1710­
2170 MHz, 37° horizontal beamwidth, internal electrical tilt. 

Electrical Specifications
Frequency Band, MHz 698–790 790–894 1710–1920 1920–2170
Gain, dBi 13.8 14.5 16.2 17.5
Beam Centers, Horizontal, degrees ±28 ±28 ±30 ±30
Beamwidth, Horizontal, degrees 40 33 42 35
Beamwidth, Vertical, degrees 24.0 21.0 12.0 11.0
Beam Tilt, degrees 1–16 1–16 0–10 0–10
USLS, dB 15 15 15 15
Front­to­Back Ratio at 180°, dB 20 20 30 30
Isolation, dB 22 22 20 20
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 500 500 300 300
Polarization ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 8 
Wind Loading, maximum  1550.0 N @ 160 km/h 
348.5 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  1745.0 mm x 564.0 mm x 127.0 mm | 68.7 in x 22.2 in x 5.0 in 
Net Weight  29.5 kg | 65.0 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 24, 2014 7
April 16, 2014
Product Specifications
HBXX
HBXX--3817TB1
3817TB1--VTM
Andrew® Twin Beam Capacity Antenna, 1710–2180 MHz, 2x 
38° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 18.9 19.1 19.3
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.6
0 ° | 18.7  0 ° | 18.9  0 ° | 19.3 
Gain by Beam Tilt, average, dBi  5 ° | 19.0   5 ° | 19.2   5 ° | 19.5 
 10 ° | 18.9   10 ° | 19.1   10 ° | 19.0 
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Horizontal Tolerance, degrees ±1.5 ±1.3 ±2.2
Beamwidth, Vertical, degrees 7.5 7.1 6.7
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5
Beam Tilt, degrees 0–10 0–10 0–10
Horizontal Sidelobe, dB 20 20 20
USLS, dB 20 20 21
Gain Roll­off at Boresite, dB 9 9 9
Gain Roll­off at Boresite Tolerance, dB ±2 ±2 ±2
Front­to­Back Total Power at 180° ± 30°, dB 30 31 29
Isolation, Cross Polarization, port to port, dB 30 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power per Port, maximum, watts 250 250 250
Polarization ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  438.0 N @ 150 km/h 
98.5 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1390.0 mm x 301.0 mm x 181.0 mm | 54.7 in x 11.9 in x 7.1 in 
Net Weight  16.5 kg | 36.4 lb 
Model with factory installed AISG 2.0 RET  HBXX­3817TB1­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: December 23, 2013 8
May 9, 2014
 Low Band
Base Station Antenna
Selection Guide
Single Band

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

33° Horizontal Beamwidth Models

LDX-3316DS-VTM 790–960 ±45° 2–12 17.9 32 15.0 14 29 30 1.4:1 300 17.9 / 39.5 1306 / 51.4 591 / 23.3
65° Horizontal Beamwidth Models

Low Band Antennas

LDX-6513DS-VTM 790–960 ±45° 0–15 15.2 65 14.0 16 30 30 1.4:1 350 9.3 / 20.5 1294 / 50.9 269 / 10.6
LDX-6515DSP-VTM 790–960 ±45° 0–10 17.1 65 8.1 17 28 30 1.4:1 350 17.9 / 39.4 2339 / 92.1 269 / 10.6
LDX-6515DS-VTM 790–960 ±45° 0–10 16.4 64 9.7 18 24 30 1.4:1 350 15.0 / 33.1 2070 / 81.5 269 / 10.6
LDX-6516DS-VTM 790–960 ±45° 0–8 17.5 64 7.1 19 24 30 1.4:1 350 21.0 / 46.3 2574 / 101.3 269 / 10.6
85°/90° Horizontal Beamwidth Models
LRX-8512DS-VTM 698–960 ±45° 0–15 14.0 85 14.4 15 24 30 1.4:1 400 13.6 / 30.0 1293 / 50.9 301 / 11.9
LDX-9013DS-VTM 790–960 ±45° 0–10 15.2 90 10.4 16 27 30 1.4:1 300 12.0 / 26.5 1831 / 72.1 225 / 8.9
LDX-9014DS-VTM 790–960 ±45° 0–8 15.8 89 7.5 17 22 30 1.4:1 300 18.1 / 39.9 2435 / 95.9 225 / 8.9

Single Band Quad

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

LDXX-6515DS-VTM 2x 790–960 ±45° 0–10 17.0 63 9.6 20 27 30 1.4:1 350 35.6 / 78.5 2070 / 81.5 549 / 21.6
LDXX-6516DS-VTM 2x 790–960 ±45° 0–8 17.3 64 7.1 17 24 30 1.4:1 350 32.1 / 70.8 2567 / 101.1 549 / 21.6
85°/90° Horizontal Beamwidth Models
LDXX-9013DS-VTM 2x 790–960 ±45° 0–10 15.1 87 10.6 17 27 30 1.5:1 300 30.0 / 66.1 1830 / 72.0 549 / 21.6

Note: Specifications are subject to change without notice. See www.commscope.com for the most current information.
Product Specifications
LDX
LDX--3316DS
3316DS--VTM
Andrew® Antenna, 790–960 MHz, 33° horizontal 
beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 17.5 17.9
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.3
2 ° | 17.6  2 ° | 18.0 
Gain by Beam Tilt, average, dBi  7 ° | 17.5   7 ° | 18.0 
 12 ° | 17.5   12 ° | 17.7 
Beamwidth, Horizontal, degrees 34 32
Beamwidth, Horizontal Tolerance, degrees ±2 ±2
Beamwidth, Vertical, degrees 16.0 15.0
Beamwidth, Vertical Tolerance, degrees ±1 ±1
Beam Tilt, degrees 2–12 2–12
USLS, dB 14 14
Front­to­Back Total Power at 180° ± 30°, dB 29 29
CPR at Boresight, dB 15 12
Isolation, dB 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 300 300
Polarization ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  933.0 N @ 150 km/h 
209.7 lbf @ 150 km/h 
Wind Speed, maximum  241.6 km/h | 150.1 mph 
Antenna Dimensions, L x W x D  1306.0 mm x 591.0 mm x 179.0 mm | 51.4 in x 23.3 in x 7.0 in 
Net Weight  17.9 kg | 39.5 lb 
Model with factory installed AISG 2.0 RET  LDX­3316DS­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: September 20, 2013 9
May 9, 2014
Product Specifications
LDX
LDX--6513DS
6513DS--VTM
Andrew® Antenna, 790–960 MHz, 65° horizontal beamwidth, 
RET compatible variable electrical tilt 

Electrical Specifications
Frequency Band, MHz 790–896 870–960
Gain, dBi 15.0 15.2
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 15.2 14.5
Beam Tilt, degrees 0–15 0–15
USLS, typical, dB 16 16
Front­to­Back Ratio at 180°, dB 32 30
Isolation, dB 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 350 350
Polarization ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | PVC, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  402.2 N @ 150 km/h 
90.4 lbf @ 150 km/h 
Wind Speed, maximum  241.5 km/h | 150.0 mph 
Antenna Dimensions, L x W x D  1294.0 mm x 269.0 mm x 132.0 mm | 50.9 in x 10.6 in x 5.2 in 
Net Weight  9.3 kg | 20.5 lb 
Model with factory installed AISG 2.0 RET  LDX­6513DS­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: September 20, 2013 10
April 16, 2014
Product Specifications
LDX
LDX--6515DSP
6515DSP--VTM
Andrew® Antenna, 790–960 MHz, 65° horizontal beamwidth, 
RET compatible variable electrical tilt 

Electrical Specifications
Frequency Band, MHz 790–896 870–960
Gain, dBi 17.1 17.1
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 8.7 8.1
Beam Tilt, degrees 0–10 0–10
USLS, typical, dB 17 16
Front­to­Back Ratio at 180°, dB 27 28
Isolation, dB 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 350 350
Polarization ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | PVC, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  828.2 N @ 150 km/h 
186.2 lbf @ 150 km/h 
Wind Speed, maximum  241.5 km/h | 150.0 mph 
Antenna Dimensions, L x W x D  2339.0 mm x 269.0 mm x 132.0 mm | 92.1 in x 10.6 in x 5.2 in 
Net Weight  17.9 kg | 39.4 lb 
Model with factory installed AISG 2.0 RET  LDX­6515DSP­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: September 20, 2013 11
April 16, 2014
Product Specifications
LDX
LDX--6515DS
6515DS--VTM
Andrew® Antenna, 790–960 MHz, 65° horizontal beamwidth, 
RET compatible variable electrical tilt 

Electrical Specifications
Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 16.2 16.4
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.3
0 ° | 16.1  0 ° | 16.3 
Gain by Beam Tilt, average, dBi  5 ° | 16.3   5 ° | 16.4 
 10 ° | 16.2   10 ° | 16.2 
Beamwidth, Horizontal, degrees 64 64
Beamwidth, Horizontal Tolerance, degrees ±1.4 ±1
Beamwidth, Vertical, degrees 10.2 9.7
Beamwidth, Vertical Tolerance, degrees ±0.7 ±0.4
Beam Tilt, degrees 0–10 0–10
USLS, dB 17 18
Front­to­Back Total Power at 180° ± 30°, dB 25 24
CPR at Boresight, dB 28 25
CPR at Sector, dB 16 14
Isolation, dB 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 350 350
Polarization ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | PVC, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  718.0 N @ 150 km/h 
161.4 lbf @ 150 km/h 
Wind Speed, maximum  241.5 km/h | 150.0 mph 
Antenna Dimensions, L x W x D  2070.0 mm x 269.0 mm x 132.0 mm | 81.5 in x 10.6 in x 5.2 in 
Net Weight  15.0 kg | 33.1 lb 
Model with factory installed AISG 2.0 RET  LDX­6515DS­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 17, 2014 12
May 9, 2014
Product Specifications
LDX
LDX--6516DS
6516DS--VTM
Andrew® Antenna, 790–960 MHz, 65° horizontal beamwidth, 
RET compatible variable electrical tilt 

Electrical Specifications
Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 17.3 17.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3
0 ° | 17.2  0 ° | 17.5 
Gain by Beam Tilt, average, dBi  4 ° | 17.4   4 ° | 17.6 
 8 ° | 17.3   8 ° | 17.6 
Beamwidth, Horizontal, degrees 64 64
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±1
Beamwidth, Vertical, degrees 7.6 7.1
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.3
Beam Tilt, degrees 0–8 0–8
USLS, dB 19 19
Front­to­Back Total Power at 180° ± 30°, dB 25 24
CPR at Boresight, dB 24 22
CPR at Sector, dB 17 16
Isolation, dB 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­153 ­153
Input Power per Port, maximum, watts 350 350
Polarization ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | PVC, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  922.0 N @ 150 km/h 
207.3 lbf @ 150 km/h 
Wind Speed, maximum  201.0 km/h | 124.9 mph 
Antenna Dimensions, L x W x D  2574.0 mm x 269.0 mm x 132.0 mm | 101.3 in x 10.6 in x 5.2 in 
Net Weight  21.0 kg | 46.3 lb 
Model with factory installed AISG 2.0 RET  LDX­6516DS­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 17, 2014 13
May 9, 2014
Product Specifications
LRX
LRX--8512DS
8512DS--VTM
Andrew® Antenna, 698–960 MHz, 85° horizontal 
beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 698–806 806–896 870–960
Gain, dBi 13.5 13.9 14.0
Beamwidth, Horizontal, degrees 85 85 85
Beamwidth, Vertical, degrees 16.8 15.3 14.4
Beam Tilt, degrees 0–15 0–15 0–15
USLS, typical, dB 16 15 15
Front­to­Back Ratio at 180°, dB 26 25 24
CPR at Boresight, dB 20 27 24
CPR at Sector, dB 13 11 10
Isolation, dB 30 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­153 ­153 ­153
Input Power per Port, maximum, watts 400 400 400
Polarization ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  402.0 N @ 150 km/h 
90.4 lbf @ 150 km/h 
Wind Speed, maximum  241.4 km/h | 150.0 mph 
Antenna Dimensions, L x W x D  1293.0 mm x 301.0 mm x 181.0 mm | 50.9 in x 11.9 in x 7.1 in 
Net Weight  13.6 kg | 30.0 lb 
Model with factory installed AISG 2.0 RET  LRX­8512DS­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: December 26, 2013 14
April 16, 2014
Product Specifications
LDX
LDX--9013DS
9013DS--VTM
Andrew® Antenna, 790–960 MHz, 90° horizontal 
beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960
Gain, dBi 14.9 15.2
Beamwidth, Horizontal, degrees 90 90
Beamwidth, Vertical, degrees 11.4 10.4
Beam Tilt, degrees 0–10 0–10
0 ° 6 ° 10 ° 0 ° 6 ° 10 °
USLS by Beam Tilt, dB
14 16 14 14 16 14
Front­to­Back Ratio at 180°, dB 25 27
CPR at Boresight, dB 19 19
CPR at Sector, dB 15 15
Isolation, dB 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 300 300
Polarization ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  391.5 N @ 150 km/h 
88.0 lbf @ 150 km/h 
Wind Speed, maximum  241.6 km/h | 150.1 mph 
Antenna Dimensions, L x W x D  1831.0 mm x 225.0 mm x 164.0 mm | 72.1 in x 8.9 in x 6.5 in 
Net Weight  12.0 kg | 26.5 lb 
Model with factory installed AISG 2.0 RET  LDX­9013DS­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: February 11, 2014 15
April 16, 2014
Product Specifications
LDX
LDX--9014DS
9014DS--VTM
Andrew® Teletilt® Antenna, 790–960 MHz, 90° horizontal 
beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 15.6 15.8
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3
0 ° | 15.5  0 ° | 15.7 
Gain by Beam Tilt, average, dBi  4 ° | 15.6   4 ° | 15.9 
 8 ° | 15.6   8 ° | 15.8 
Beamwidth, Horizontal, degrees 89 89
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±1.6
Beamwidth, Vertical, degrees 8.0 7.5
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.3
Beam Tilt, degrees 0–8 0–8
USLS, dB 16 17
Front­to­Back Total Power at 180° ± 30°, dB 22 22
CPR at Boresight, dB 20 20
CPR at Sector, dB 14 14
Isolation, dB 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150
Input Power per Port, maximum, watts 300 300
Polarization ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  526.0 N @ 150 km/h 
118.2 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  2435.0 mm x 225.0 mm x 164.0 mm | 95.9 in x 8.9 in x 6.5 in 
Net Weight  18.1 kg | 39.9 lb 
Model with factory installed AISG 2.0 RET  LDX­9014DS­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 13, 2014 16
May 9, 2014
Product Specifications
LDXX
LDXX--6515DS
6515DS--VTM
Andrew® Quad Port Teletilt® Antenna, 790–960 MHz, 65° 
horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–862 824–894 870–960
Gain, dBi 16.3 16.4 17.0
Beamwidth, Horizontal, degrees 67 65 63
Beamwidth, Vertical, degrees 10.3 10.2 9.6
Beam Tilt, degrees 0–10 0–10 0–10
0 ° 6 ° 10 ° 0 ° 6 ° 10 ° 0 ° 6 ° 10 °
USLS by Beam Tilt, dB
17 21 19 17 21 18 16 20 20
Front­to­Back Ratio at 180°, dB 32 28 27
CPR at Boresight, dB 24 23 23
CPR at Sector, dB 14 13 10
Isolation, dB 30 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350
Polarization ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  1170.0 N @ 150 km/h 
263.0 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  2070.0 mm x 549.0 mm x 165.0 mm | 81.5 in x 21.6 in x 6.5 in 
Net Weight  35.6 kg | 78.5 lb 
Model with factory installed AISG 2.0 RET  LDXX­6515DS­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 17
April 16, 2014
Product Specifications
LDXX
LDXX--6516DS
6516DS--VTM
Andrew® Quad Port Teletilt® Antenna, 790–960 MHz, 65° 
horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–862 824–894 870–960
Gain by all Beam Tilts, average, dBi 16.8 17.1 17.3
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.2 ±0.4
0 ° | 16.7  0 ° | 17.0  0 ° | 17.2 
Gain by Beam Tilt, average, dBi  4 ° | 16.8   4 ° | 17.2   4 ° | 17.3 
 8 ° | 16.7   8 ° | 17.1   8 ° | 17.3 
Beamwidth, Horizontal, degrees 70 67 64
Beamwidth, Horizontal Tolerance, degrees ±3.5 ±3.1 ±4
Beamwidth, Vertical, degrees 7.9 7.5 7.1
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.4 ±0.3
Beam Tilt, degrees 0–8 0–8 0–8
USLS, typical, dB 16 17 17
Front­to­Back Total Power at 180° ± 30°, dB 26 26 24
CPR at Boresight, dB 24 24 25
CPR at Sector, dB 16 16 12
Isolation, dB 30 30 30
Isolation, Cross Polarization, port to port, dB 30 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350
Polarization ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  1436.0 N @ 150 km/h 
322.8 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  2567.0 mm x 549.0 mm x 165.0 mm | 101.1 in x 21.6 in x 6.5 in 
Net Weight  32.1 kg | 70.8 lb 
Model with factory installed AISG 2.0 RET  LDXX­6516DS­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: April 16, 2014 18
May 9, 2014
Product Specifications
LDXX
LDXX--9013DS
9013DS--VTM
Andrew® Quad Port Teletilt® Antenna, 790–960 MHz, 90° 
horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–862 824–894 870–960
Gain, dBi 14.7 14.7 15.1
Beamwidth, Horizontal, degrees 90 88 87
Beamwidth, Vertical, degrees 11.4 11.0 10.6
Beam Tilt, degrees 0–10 0–10 0–10
0 ° 6 ° 10 ° 0 ° 6 ° 10 ° 0 ° 6 ° 10 °
USLS by Beam Tilt, dB
19 15 15 17 15 15 16 17 15
Front­to­Back Ratio at 180°, dB 26 27 27
CPR at Boresight, dB 18 18 19
CPR at Sector, dB 10 11 11
Isolation, dB 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 300
Polarization ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  1188.1 N @ 150 km/h 
267.1 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1830.0 mm x 549.0 mm x 165.0 mm | 72.0 in x 21.6 in x 6.5 in 
Net Weight  30.0 kg | 66.1 lb 
Model with factory installed AISG 2.0 RET  LDXX­9013DS­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 19
April 16, 2014
 High Band
Base Station Antenna
Selection Guide
Single Band Ultra-Wideband

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

HWX-6516DS1-VTM 1710–2690 ±45° 0–10 18.5 61 5.0 21 28 30 1.5:1 300 6.0 / 13.2 1390 / 54.7 170 / 6.7

Single Band Quad Ultra-Wideband

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

HWXX-6516DS1-VTM 2x 1710–2690 ±45° 0–10 18.3 63 5.3 20 27 30 1.5:1 350 10.2 / 22.5 1390 / 54.7 305 / 12.0
VVPX303F1 2x 1710–2690 ±45° 0 13.2 62 19.0 17 25 30 1.5:1 250 5.0 / 11.0 420 / 16.5 290 / 11.4
VVPX306M-V5 2x 1710–2690 ±45° 0–10 16.3 61 10.1 18 29 30 1.5:1 250 8.5 / 18.7 875 / 34.4 290 / 11.4

Single Band Hex Port Ultra-Wideband

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

HWXXX-6516DS-VTM 3x 1710–2690 ±45° 0–10 18.3 62 5.1 21 26 30 1.5:1 350 19.5 / 43.0 1390 / 54.7 504 / 19.8

Note: Specifications are subject to change without notice. See www.commscope.com for the most current information.

High Band Antennas

Product Specifications
HWX
HWX--6516DS1
6516DS1--VTM
Andrew® Teletilt® Antenna, 1710–2690 MHz, 65° horizontal 
beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2170 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 17.1 17.2 17.7 18.3 18.5
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3 ±0.7 ±0.2 ±0.4
0 ° | 17.1  0 ° | 17.2  0 ° | 17.7  0 ° | 18.1  0 ° | 18.6 
Gain by Beam Tilt, average, dBi  5 ° | 17.2   5 ° | 17.3   5 ° | 17.8   5 ° | 18.4   5 ° | 18.7 
 10 ° | 16.9   10 ° | 16.9   10 ° | 17.4   10 ° | 18.1   10 ° | 18.1 
Beamwidth, Horizontal, degrees 68 66 65 61 60
Beamwidth, Horizontal Tolerance, degrees ±2.4 ±2.3 ±1.9 ±2.2 ±1.9
Beamwidth, Vertical, degrees 6.8 6.4 6.1 5.4 5.0
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.2 ±0.4 ±0.3 ±0.3
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 17 17 21 20
Front­to­Back Total Power at 180° ± 30°, dB 27 27 27 28 26
CPR at Boresight, dB 17 19 20 21 17
CPR at Sector, dB 14 12 11 10 9
Isolation, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350 300 300
Polarization ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | PVC, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 
Wind Loading, maximum  273.0 N @ 150 km/h 
61.4 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1390.0 mm x 170.0 mm x 105.0 mm | 54.7 in x 6.7 in x 4.1 in 
Net Weight  6.0 kg | 13.2 lb 
Model with factory installed AISG 2.0 RET  HWX­6516DS1­A1M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 31, 2014 20
May 9, 2014
Product Specifications
HWXX
HWXX--6516DS1
6516DS1--VTM
Andrew® Quad Port Teletilt® Antenna, 1710–2690 MHz, 65° 
horizontal beamwidth RET compatible 

Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2170 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 17.2 17.4 17.8 18.0 18.3
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.4 ±0.5 ±0.3 ±0.3
0 ° | 17.0  0 ° | 17.3  0 ° | 17.8  0 ° | 17.8  0 ° | 18.3 
Gain by Beam Tilt, average, dBi  5 ° | 17.3   5 ° | 17.4   5 ° | 17.9   5 ° | 18.1   5 ° | 18.4 
 10 ° | 17.1   10 ° | 17.2   10 ° | 17.6   10 ° | 18.0   10 ° | 17.9 
Beamwidth, Horizontal, degrees 66 65 65 63 62
Beamwidth, Horizontal Tolerance, degrees ±2.7 ±2.7 ±2.1 ±2.1 ±3
Beamwidth, Vertical, degrees 6.7 6.4 6.1 5.3 5.1
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.2 ±0.4 ±0.2 ±0.2
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 16 16 17 20 21
Front­to­Back Total Power at 180° ± 30°, dB 25 26 27 27 26
CPR at Boresight, dB 16 17 16 19 18
CPR at Sector, dB 15 14 14 9 10
Isolation, dB 30 30 30 30 30
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350 350 350
Polarization ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | PVC, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  512.0 N @ 150 km/h 
115.1 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1390.0 mm x 305.0 mm x 118.0 mm | 54.7 in x 12.0 in x 4.6 in 
Net Weight  10.2 kg | 22.5 lb 
Model with factory installed AISG 2.0 RET  HWXX­6516DS1­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 10, 2014 21
May 9, 2014
Product Specifications
VVPX303F1
Argus® Quad Antenna, 2 x 1710­2690 MHz, fixed 
electrical tilt 

Electrical Specifications
Frequency Band, MHz 1710–1920 1920–2170 2300–2690
Gain, dBi 11.8 12.5 13.2
Beamwidth, Horizontal, degrees 68 66 62
Beamwidth, Vertical, degrees 27.0 23.0 19.0
Beam Tilt, degrees 0 0 0
USLS, dB 17 17 17
Front­to­Back Ratio at 180°, dB 25 25 25
Isolation, dB 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power per Port, maximum, watts 250 250 250
Polarization ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  180.0 N @ 160 km/h 
40.5 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  420.0 mm x 290.0 mm x 103.0 mm | 16.5 in x 11.4 in x 4.1 in 
Net Weight  5.0 kg | 11.0 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: March 20, 2014 22
April 16, 2014
Product Specifications
VVPX306M
VVPX306M--V5
Argus® Quad Antenna, 2 x 1710–2690 MHz, 65° horizontal 
beamwidth, variable electrical tilt 

Electrical Specifications
Frequency Band, MHz 1710–1920 1920–2170 2300–2690
Gain by all Beam Tilts, average, dBi 15.0 15.6 16.3
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.5
0 ° | 14.9  0 ° | 15.6  0 ° | 16.4 
Gain by Beam Tilt, average, dBi  5 ° | 14.9   5 ° | 15.6   5 ° | 16.4 
 10 ° | 15.0   10 ° | 15.6   10 ° | 16.0 
Beamwidth, Horizontal, degrees 65 64 61
Beamwidth, Horizontal Tolerance, degrees ±3.4 ±3.5 ±5.4
Beamwidth, Vertical, degrees 13.9 12.5 10.1
Beamwidth, Vertical Tolerance, degrees ±0.9 ±0.8 ±0.8
Beam Tilt, degrees 0–10 0–10 0–10
USLS, dB 18 18 18
Front­to­Back Total Power at 180° ± 30°, dB 24 26 29
CPR at Boresight, dB 11 18 21
CPR at Sector, dB 18 12 12
Isolation, dB 30 30 30
Isolation, Intersystem, dB 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power per Port, maximum, watts 250 250 250
Polarization ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  326.0 N @ 150 km/h 
73.3 lbf @ 150 km/h 
Wind Speed, maximum  250.0 km/h | 155.3 mph 
Antenna Dimensions, L x W x D  875.0 mm x 290.0 mm x 103.0 mm | 34.4 in x 11.4 in x 4.1 in 
Net Weight  8.5 kg | 18.7 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: February 20, 2014 23
May 9, 2014
Product Specifications
HWXXX
HWXXX--6516DS
6516DS--VTM
Andrew® Hex Port Teletilt® Antenna, 1710–2690 MHz, 65° 
horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 17.2 17.3 17.6 17.9 17.9
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.4 ±0.5 ±0.3 ±0.5
0 ° | 17.0  0 ° | 17.1  0 ° | 17.5  0 ° | 17.7  0 ° | 17.7 
Gain by Beam Tilt, average, dBi  5 ° | 17.2   5 ° | 17.3   5 ° | 17.7   5 ° | 17.9   5 ° | 18.0 
 10 ° | 17.2   10 ° | 17.3   10 ° | 17.7   10 ° | 17.9   10 ° | 17.8 
Beamwidth, Horizontal, degrees 62 63 64 62 61
Beamwidth, Horizontal Tolerance, degrees ±3.6 ±2.9 ±4.2 ±3.9 ±5.3
Beamwidth, Vertical, degrees 7.3 6.8 6.4 5.3 5.0
Beamwidth, Vertical Tolerance, degrees ±0.4 ±0.3 ±0.5 ±0.2 ±0.3
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 15 16 17 15 14
Front­to­Back Total Power at 180° ± 30°, dB 24 24 23 23 20
CPR at Boresight, dB 23 21 19 19 19
CPR at Sector, dB 13 10 9 8 14
Isolation, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350 300 300
Polarization ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  715.0 N @ 150 km/h 
160.7 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1390.0 mm x 504.0 mm x 118.0 mm | 54.7 in x 19.8 in x 4.6 in 
Net Weight  19.5 kg | 43.0 lb 
Model with factory installed AISG 2.0 RET  HWXXX­6516DS­A3M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: April 16, 2014 24
May 9, 2014
 Multi-Band
Base Station Antenna
Selection Guide
Dual Band LTE800

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

790–960 ±45° 0–16 14.0 67 14.3 16 21 30 1.5:1 300
DBXDH-6565A-VTM 15.3 / 33.7 1293 / 50.9 301 / 11.9
1710–2180 ±45° 2–12 16.9 59 6.4 15 26 30 1.5:1 250
790–960 ±45° 2–12 16.7 65 9.2 15 29 30 1.5:1 500
DBXDH-6565B-VTM 22.8 / 50.3 1998 / 78.7 301 / 11.9
1710–2180 ±45° 1–8 18.7 65 5.2 15 33 30 1.5:1 400
790–960 ±45° 1–9 16.7 66 7.1 16 23 30 1.5:1 350
DBXDH-6565EC-VTM 22.5 / 49.6 2578 / 101.5 301 / 11.9
1710–2180 ±45° 0–10 17.1 60 6.2 17 24 30 1.5:1 350
85° Horizontal Beamwidth Models
790–960 ±45° 0–15 14.0 86 15.3 18 25 30 1.5:1 500
DBXDH-8585A-VTM 14.5 / 32.0 1298 / 51.1 301 / 11.9
1710–2180 ±45° 0–10 16.1 84 6.4 15 26 30 1.5:1 300
790–960 ±45° 0–10 14.9 85 10.5 16 24 30 1.4:1 400
DBXDH-8585B-VTM 21.0 / 46.2 1847 / 72.7 301 / 11.9
1710–2180 ±45° 0–6 17.2 84 5.2 17 29 30 1.5:1 300
698–960 ±45° 0–11 16.1 85 7.3 15 28 30 1.5:1 400
DBXRH-8585C-VTM 21.9 / 48.3 2449 / 96.4 301 / 11.9
1710–2180 ±45° 0–6 17.1 85 4.2 17 29 30 1.5:1 300

Dual Band Ultra-Wideband

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

790–960 ±45° 0–10 15.4 62 9.7 16 25 28 1.5:1 350
CV65BSX-M 17.9 / 39.5 1970 / 77.6 301 / 11.9
1710–2690 ±45° 2–12 18.0 58 4.1 16 24 28 1.5:1 300

Tri-Band LTE800

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

790–960 ±45° 1–9 17.0 67 7.1 16 32 30 1.5:1 300
MBDHH-65C-VTM 23.5 / 51.8 2578 / 101.5 301 / 11.9
1710–2180 ±45° 0–10 17.5 59 6.7 14 29 30 1.5:1 250

Tri-Band Ultra-Wideband

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

790–960 ±45° 0–10 15.5 61 9.6 16 27 28 1.5:1 350
CVV65BSX-M 18.8 / 41.4 1970 / 77.6 301 / 11.9
2x 1710–2690 ±45° 2–12 17.9 60 4.1 16 24 28 1.5:1 300
790–960 ±45° 0–10 16.5 61 7.6 16 27 28 1.5:1 350
CVV65CSX-M 22.2 / 48.9 2449 / 96.4 301 / 11.9
2x 1710–2690 ±45° 2–12 17.9 60 4.1 18 24 28 1.5:1 300
790–960 ±45° 0 12.5 62 25.0 15 25 20 1.43:1 300
CVVPX303F1 11 / 24.3 860 / 33.9 353 / 13.9
2x 1710–2690 ±45° 0 12.8 62 18.0 15 25 25 1.5:1 250
790–960 ±45° 0–10 13.4 63 19.5 17 25 25 1.43:1 300
CVVPX304R3 14.5 / 32 1093 / 43 353 / 13.9
2x 1710–2690 ±45° 0–10 14.2 61 14.5 15 25 25 1.5:1 250
790–960 ±45° 0–10 14.8 62 13.5 18 25 25 1.43:1 300
Multi Band Antennas

CVVPX306R3 21.0 / 46.3 1560 / 61.4 353 / 13.9

2x 1710–2690 ±45° 0–10 16.2 60 9.5 18 25 25 1.5:1 250
790–960 ±45° 0–10 16.0 60 10.0 18 25 25 1.43:1 300
CVVPX308.10R3 26.0 / 57.3 2025 / 79.7 354 / 13.9
2x 1710–2690 ±45° 0–10 18.2 60 5.7 18 25 25 1.5:1 250
790–960 ±45° 0–10 16.8 62 8.0 18 25 25 1.43:1 300
CVVPX310R1 31.0 / 68.3 2494 / 98.2 353 / 13.9
2x 1710–2690 ±45° 0–10 18.0 62 5.8 18 25 25 1.5:1 250
698–960 ±45° 0–10 14.1 63 16.6 18 23 25 1.43:1 300
RVVPX305.10R3 20 / 44.1 1380 / 54.3 353 / 13.9
2x 1710–2690 ±45° 0–10 17.4 63 6.0 18 26 25 1.5:1 250
698–960 ±45° 0–10 14.8 63 13.4 20 24 25 1.43:1 300
RVVPX306.11R3 23 / 50.7 1600 / 63 353 / 13.9
2x 1710–2690 ±45° 0–10 17.7 61 5.4 20 25 25 1.43:1 250
698–960 ±45° 0–10 15.7 63 10.1 20 24 25 1.43:1 300
RVVPX308.14R3 28 / 61.7 2065 / 81.3 353 / 13.9
2x 1710–2690 ±45° 0–10 18.6 63 4.2 19 25 25 1.5:1 250
698–960 ±45° 0–10 14.4 61 8.0 18 25 25 1.43:1 300
RVVPX310R-V 31 / 68.3 2490 / 98 296 / 11.7
2x 1710–2690 ±45° 0–10 18.0 60 5.8 18 25 25 1.5:1 250
Multi-Band
Base Station Antenna
Selection Guide
Quad Band Ultra-Wideband
Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

790–960 ±45° 0–10 15.6 64 10.5 23 26 25 1.43:1 300
CV3PX308R1 27.1 / 59.7 2067 / 81.4 353 / 13.9
3x 1710–2690 ±45° 0–10 16.2 66 7.1 19 25 25 1.5:1 250
790–960 ±45° 0–10 16.8 62 8.0 18 25 25 1.43:1 300
CV3PX310R1 36.0 / 79.4 2533 / 99.7 353 / 13.9
3x 1710–2690 ±45° 0–10 18.0 62 5.8 18 25 25 1.5:1 250

Multi-Port Ultra-Wideband

Frequency Tilt Gain HBW VBW USLS F/B Isolation Max. Input Weight Length Width
Model Polarization VSWR
(MHz) (Degree) (dBi) (Degree) (Degree) (dB) (dB) (dB) Power (W) (kg/lb) (mm/in) (mm/in)

65° Horizontal Beamwidth Models

698–960 ±45° 0–10 16.5 62 8.0 18 25 25 1.43:1 300
RV4PX310B1 37.0 / 81.6 2533 / 99.7 353 / 13.9
4x 1710–2690 ±45° 0–10 18.0 62 5.8 18 25 25 1.5:1 250
698–960 ±45° 0–10 16.5 62 8.0 18 25 25 1.43:1 300
RV4PX310R 37.0 / 81.6 2533 / 99.7 353 / 13.9
4x 1710–2690 ±45° 0–10 18.0 62 5.8 18 25 25 1.5:1 250

Note: Specifications are subject to change without notice. See www.commscope.com for the most current information.
Product Specifications
DBXDH
DBXDH--6565A
6565A--VTM
Andrew® Dual Band Antenna, 790–960 MHz and 1710–2180 
MHz, 65° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 13.8 14.0 16.7 16.8 16.9
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.4 ±0.4 ±0.5
0 ° | 13.9  0 ° | 14.2  2 ° | 16.8  2 ° | 16.9  2 ° | 16.9 
Gain by Beam Tilt, average, dBi  8 ° | 13.9   8 ° | 14.1   7 ° | 16.9   7 ° | 17.0   7 ° | 17.1 
 16 ° | 13.4   16 ° | 13.6   12 ° | 16.5   12 ° | 16.4   12 ° | 16.5 
Beamwidth, Horizontal, degrees 69 67 63 59 59
Beamwidth, Horizontal Tolerance, degrees ±3.2 ±3.9 ±4.4 ±2.4 ±2.2
Beamwidth, Vertical, degrees 15.2 14.3 7.1 6.7 6.4
Beamwidth, Vertical Tolerance, degrees ±1 ±0.7 ±0.4 ±0.3 ±0.5
Beam Tilt, degrees 0–16 0–16 2–12 2–12 2–12
USLS, dB 15 16 14 15 16
Front­to­Back Total Power at 180° ± 30°, dB 20 21 26 26 26
CPR at Boresight, dB 25 23 22 21 20
CPR at Sector, dB 12 8 9 9 10
Isolation, dB 30 30 30 30 30
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  403.0 N @ 150 km/h 
90.6 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1293.0 mm x 301.0 mm x 181.0 mm | 50.9 in x 11.9 in x 7.1 in 
Net Weight  15.3 kg | 33.7 lb 
Model with factory installed AISG 2.0 RET  DBXDH­6565A­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 10, 2014 25
May 9, 2014
Product Specifications
DBXDH
DBXDH--6565B
6565B--VTM
Andrew® Dual Band Antenna, 790–960 MHz and 1710–2180 
MHz, 65° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180
Gain, dBi 15.8 16.7 18.7 18.6 18.3
Beamwidth, Horizontal, degrees 66 65 65 63 63
Beamwidth, Vertical, degrees 10.0 9.2 5.2 5.0 4.8
Beam Tilt, degrees 2–12 2–12 1–8 1–8 1–8
USLS, typical, dB 15 15 15 15 15
Front­to­Back Ratio at 180°, dB 28 29 33 32 31
Isolation, dB 30 30 30 30 30
Isolation, Intersystem, dB 37 35 40 40 40
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 500 500 400 400 400
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  681.0 N @ 150 km/h 
153.1 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1998.0 mm x 301.0 mm x 181.0 mm | 78.7 in x 11.9 in x 7.1 in 
Net Weight  22.8 kg | 50.3 lb 
Model with factory installed AISG 2.0 RET  DBXDH­6565B­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 26
April 16, 2014
Product Specifications
DBXDH
DBXDH--6565EC
6565EC--VTM
Andrew® Dual Band Antenna, 790–960 MHz and 1710–2180 
MHz, 65° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 16.4 16.7 16.9 17.0 17.1
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.3 ±0.4 ±0.4 ±0.4
1 ° | 16.5  1 ° | 16.6  0 ° | 16.9  0 ° | 16.8  0 ° | 16.9 
Gain by Beam Tilt, average, dBi  5 ° | 16.5   5 ° | 16.8   5 ° | 17.1   5 ° | 17.1   5 ° | 17.4 
 9 ° | 16.3   9 ° | 16.7   10 ° | 16.6   10 ° | 16.8   10 ° | 17.1 
Beamwidth, Horizontal, degrees 68 66 61 61 60
Beamwidth, Horizontal Tolerance, degrees ±1.8 ±3.3 ±3.7 ±0.7 ±3.8
Beamwidth, Vertical, degrees 7.6 7.1 6.9 6.6 6.2
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.2 ±0.4 ±0.3 ±0.5
Beam Tilt, degrees 1–9 1–9 0–10 0–10 0–10
USLS, dB 15 16 17 18 17
Front­to­Back Total Power at 180° ± 30°, dB 23 23 27 25 24
CPR at Boresight, dB 25 25 18 19 19
CPR at Sector, dB 16 8 11 11 10
Isolation, dB 30 30 30 30 30
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350 350 350
Polarization ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  930.0 N @ 150 km/h 
209.1 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  2578.0 mm x 301.0 mm x 181.0 mm | 101.5 in x 11.9 in x 7.1 in 
Net Weight  22.5 kg | 49.6 lb 
Model with factory installed AISG 2.0 RET  DBXDH­6565EC­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: April 16, 2014 27
May 9, 2014
Product Specifications
DBXDH
DBXDH--8585A
8585A--VTM
Andrew® Dual Band Antenna, 790–960 MHz and 1710–2180 
MHz, 85° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180
Gain, dBi 13.2 14.0 15.9 16.0 16.1
Beamwidth, Horizontal, degrees 87 86 85 85 84
Beamwidth, Vertical, degrees 16.5 15.3 7.3 6.9 6.4
Beam Tilt, degrees 0–15 0–15 0–10 0–10 0–10
USLS, typical, dB 17 18 15 15 15
Front­to­Back Ratio at 180°, dB 22 25 28 26 26
Isolation, dB 30 30 30 30 30
Isolation, Intersystem, dB 40 40 35 35 35
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 500 500 300 300 300
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  402.7 N @ 150 km/h 
90.5 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1298.0 mm x 301.0 mm x 181.0 mm | 51.1 in x 11.9 in x 7.1 in 
Net Weight  14.5 kg | 32.0 lb 
Model with factory installed AISG 2.0 RET  DBXDH­8585A­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 30, 2014 28
April 16, 2014
Product Specifications
DBXDH
DBXDH--8585B
8585B--VTM
Andrew® Dual Band Antenna, 790–960 MHz and 1710–2180 
MHz, 85° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180
Gain, dBi 14.3 14.9 17.2 17.1 17.1
Beamwidth, Horizontal, degrees 85 85 84 85 85
Beamwidth, Vertical, degrees 11.2 10.5 5.2 4.8 4.4
Beam Tilt, degrees 0–10 0–10 0–6 0–6 0–6
USLS, typical, dB 16 16 17 18 18
Front­to­Back Ratio at 180°, dB 22 24 29 29 29
Isolation, dB 30 30 30 30 30
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 400 400 300 300 300
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  618.6 N @ 150 km/h 
139.1 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1847.0 mm x 301.0 mm x 181.0 mm | 72.7 in x 11.9 in x 7.1 in 
Net Weight  21.0 kg | 46.2 lb 
Model with factory installed AISG 2.0 RET  DBXDH­8585B­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 30, 2014 29
April 16, 2014
Product Specifications
DBXRH
DBXRH--8585C
8585C--VTM
Andrew® Dual Band Teletilt® Antenna, 698–960 MHz and 
1710–2180 MHz, 85° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 698–806 806–896 870–960 1710–1880 1850–1990 1920–2180
Gain, dBi 15.1 15.0 16.2 17.0 16.7 17.1
Beamwidth, Horizontal, degrees 88 85 85 81 84 85
Beamwidth, Vertical, degrees 8.4 7.6 7.3 4.7 4.4 4.2
Beam Tilt, degrees 0–11 0–11 0–11 0–6 0–6 0–6
USLS, typical, dB 15 15 15 16 17 17
Front­to­Back Ratio at 180°, dB 30 28 28 29 29 29
Front­to­Back Total Power at 180° ± 20°, dB 16 19 20 23 22 22
CPR at Boresight, dB 25 22 21 20 20 20
CPR at Sector, dB 13 11 10 8 9 10
Isolation, dB 30 30 30 30 30 30
Isolation, Intersystem, dB 30 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 400 400 400 300 300 300
Polarization ±45° ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  879.0 N @ 150 km/h 
197.6 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  2449.0 mm x 301.0 mm x 181.0 mm | 96.4 in x 11.9 in x 7.1 in 
Net Weight  21.9 kg | 48.3 lb 
Model with factory installed AISG 2.0 RET  DBXRH­8585C­A2M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: March 19, 2014 30
April 16, 2014
Product Specifications
CV65BSX
CV65BSX--M
Andrew® Dual Band Teletilt® Antenna, 790–960 MHz and 
1710–2690 MHz, 65° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.3 15.4 17.2 17.5 17.6 17.7 18.0
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.3 ±0.3 ±0.5 ±0.6 ±0.4
0 ° | 15.4  0 ° | 15.4  2 ° | 17.1  2 ° | 17.4  2 ° | 17.5  2 ° | 17.6  2 ° | 17.8 
Gain by Beam Tilt, average, dBi  5 ° | 15.4   5 ° | 15.5   7 ° | 17.3   7 ° | 17.6   7 ° | 17.7   7 ° | 17.9   7 ° | 18.1 
 10 ° | 15.1   10 ° | 15.1   12 ° | 17.2   12 ° | 17.4   12 ° | 17.6   12 ° | 17.5   12 ° | 17.7 
Beamwidth, Horizontal, degrees 63 62 71 66 67 57 58
Beamwidth, Horizontal Tolerance, 
±2.7 ±1.9 ±4.6 ±2.4 ±5 ±3.5 ±4.6
degrees
Beamwidth, Vertical, degrees 10.5 9.7 5.6 5.3 5.0 4.3 4.1
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.6 ±0.3 ±0.3 ±0.3 ±0.2 ±0.2
Beam Tilt, degrees 0–10 0–10 2–12 2–12 2–12 2–12 2–12
USLS, dB 16 16 16 17 17 16 18
Front­to­Back Total Power at 180° ± 30°, 
25 25 26 24 22 22 24
dB
CPR at Sector, dB 11 11 12 9 9 5 7
Isolation, dB 28 28 28 28 28 28 28
Isolation, Intersystem, dB 30 30 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350 350 350 300 300
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 4 
Wind Loading, maximum  669.0 N @ 150 km/h 
150.4 lbf @ 150 km/h 
Wind Speed, maximum  241.4 km/h | 150.0 mph 
Antenna Dimensions, L x W x D  1970.0 mm x 301.0 mm x 181.0 mm | 77.6 in x 11.9 in x 7.1 in 
Net Weight  17.9 kg | 39.5 lb 
Model with factory installed AISG 2.0 RET  CV65BSX­2X2 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: March 3, 2014 31
May 9, 2014
Product Specifications
MBDHH
MBDHH--65C
65C--VTM
Andrew® Tri­band Teletilt® Antenna, 790–960 MHz and 2 x 
1710–2180 MHz, 65° horizontal beamwidth, RET compatible 

Electrical Specifications
LB LB HB1 HB1 HB1 HB2 HB2 HB2
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 1710–1880 1850–1990 1920–2180
Gain, dBi 16.5 17.0 17.4 17.5 17.5 16.6 16.6 16.8
Beamwidth, Horizontal, degrees 69 67 59 59 58 62 60 58
Beamwidth, Horizontal Tolerance, degrees ±3 ±4 ±5 ±5 ±5 ±5 ±5 ±4
Beamwidth, Vertical, degrees 7.9 7.1 7.1 6.7 6.2 7.0 6.7 6.3
Beam Tilt, degrees 1–9 1–9 0–10 0–10 0–10 0–10 0–10 0–10
USLS, typical, dB 15 16 14 14 15 14 14 14
Front­to­Back Ratio at 180°, dB 27 32 31 29 29 30 29 28
CPR at Boresight, dB 22 24 20 19 18 20 20 18
CPR at Sector, dB 14 8 12 14 12 12 12 13
Isolation, dB 30 30 30 30 30 30 30 30
Isolation, Intersystem, dB 30 30 30 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Color | Radome Material  Light gray | PVC, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  930.0 N @ 150 km/h 
209.1 lbf @ 150 km/h 
Wind Speed, maximum  241.4 km/h | 150.0 mph 
Antenna Dimensions, L x W x D  2578.0 mm x 301.0 mm x 181.0 mm | 101.5 in x 11.9 in x 7.1 in 
Net Weight  23.5 kg | 51.8 lb 
Model with factory installed AISG 2.0 RET  MBDHH­65C­A3M 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 32
April 16, 2014
Product Specifications
CVV65BSX
CVV65BSX--M
Andrew® Tri­band Antenna, 1 x 790–960 MHz and 2 x 1710–
2690 MHz, 65° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.4 15.5 17.3 17.5 17.7 17.7 17.9
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.2 ±0.3 ±0.5 ±0.6 ±0.4
0 ° | 15.4  0 ° | 15.5  2 ° | 17.2  2 ° | 17.3  2 ° | 17.5  2 ° | 17.5  2 ° | 17.7 
Gain by Beam Tilt, average, dBi  5 ° | 15.4   5 ° | 15.6   7 ° | 17.4   7 ° | 17.5   7 ° | 17.8   7 ° | 17.9   7 ° | 18.1 
 10 ° | 15.2   10 ° | 15.2   12 ° | 17.2   12 ° | 17.4   12 ° | 17.6   12 ° | 17.5   12 ° | 17.7 
Beamwidth, Horizontal, degrees 62 61 70 68 67 58 60
Beamwidth, Horizontal Tolerance, 
±2.7 ±1.8 ±3.2 ±2.9 ±5.5 ±5.2 ±5.8
degrees
Beamwidth, Vertical, degrees 10.5 9.6 5.6 5.3 5.1 4.3 4.1
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.7 ±0.3 ±0.2 ±0.3 ±0.2 ±0.2
Beam Tilt, degrees 0–10 0–10 2–12 2–12 2–12 2–12 2–12
USLS, dB 17 16 16 17 17 16 18
Front­to­Back Total Power at 180° ± 30°, 
25 27 26 25 23 21 24
dB
CPR at Sector, dB 11 11 12 10 10 5 6
Isolation, dB 28 28 28 28 28 28 28
Isolation, Intersystem, dB 30 30 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350 350 350 300 300
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  669.0 N @ 150 km/h 
150.4 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  1970.0 mm x 301.0 mm x 181.0 mm | 77.6 in x 11.9 in x 7.1 in 
Net Weight  18.8 kg | 41.4 lb 
Model with factory installed AISG 2.0 RET  CVV65BSX­3X2 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: April 16, 2014 33
May 9, 2014
Product Specifications
CVV65CSX
CVV65CSX--M
Andrew® Tri­band Teletilt® Antenna, 1 x 790–960 MHz and 2 x 
1710–2690 MHz, 65° horizontal beamwidth, RET compatible 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 16.4 16.5 17.3 17.5 17.7 17.7 17.9
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.2 ±0.3 ±0.5 ±0.6 ±0.4
0 ° | 16.4  0 ° | 16.5  2 ° | 17.2  2 ° | 17.3  2 ° | 17.5  2 ° | 17.5  2 ° | 17.7 
Gain by Beam Tilt, average, dBi  5 ° | 16.4   5 ° | 16.5   7 ° | 17.4   7 ° | 17.5   7 ° | 17.8   7 ° | 17.9   7 ° | 18.1 
 10 ° | 16.2   10 ° | 16.2   12 ° | 17.2   12 ° | 17.4   12 ° | 17.6   12 ° | 17.5   12 ° | 17.7 
Beamwidth, Horizontal, degrees 62 61 70 68 67 58 60
Beamwidth, Horizontal Tolerance, 
±2 ±2 ±3.2 ±2.9 ±5.5 ±5.2 ±5.8
degrees
Beamwidth, Vertical, degrees 8.2 7.6 5.6 5.3 5.1 4.3 4.1
Beamwidth, Vertical Tolerance, degrees ±0.5 ±0.5 ±0.3 ±0.2 ±0.3 ±0.2 ±0.2
Beam Tilt, degrees 0–10 0–10 2–12 2–12 2–12 2–12 2–12
USLS, dB 17 16 16 17 17 16 18
Front­to­Back Total Power at 180° ± 30°, 
26 27 26 25 23 21 24
dB
CPR at Sector, dB 13 14 12 10 10 5 6
Isolation, dB 28 28 28 28 28 28 28
Isolation, Intersystem, dB 30 30 30 30 30 30 30
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 350 350 350 350 350 300 300
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Color | Radome Material  Light gray | Fiberglass, UV resistant 
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  879.0 N @ 150 km/h 
197.6 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  2449.0 mm x 301.0 mm x 181.0 mm | 96.4 in x 11.9 in x 7.1 in 
Net Weight  22.2 kg | 48.9 lb 
Model with factory installed AISG 2.0 RET  CVV65CSX­3X2 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: April 16, 2014 34
May 9, 2014
Product Specifications
CVVPX303F1
Argus® Tri­band Antenna, 790–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, fixed electrical tilt 

Electrical Specifications
Frequency Band, MHz 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 11.8 12.5 11.8 12.5 12.8
Beamwidth, Horizontal, degrees 64 62 60 60 62
Beamwidth, Vertical, degrees 27.0 25.0 25.0 22.0 18.0
Beam Tilt, degrees 0 0 0 0 0
USLS, dB 15 15 15 15 15
Front­to­Back Ratio at 180°, dB 25 25 25 25 25
Isolation, dB 20 20 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  450.0 N @ 160 km/h 
101.2 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  860.0 mm x 353.0 mm x 209.0 mm | 33.9 in x 13.9 in x 8.2 in 
Net Weight  11.0 kg | 24.3 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 17, 2014 35
April 16, 2014
Product Specifications
CVVPX304R3
Argus® Tri­band Antenna, 790–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. 

Electrical Specifications
Frequency Band, MHz 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 13.2 13.4 13.0 13.5 14.2
Beamwidth, Horizontal, degrees 65 63 62 61 62
Beamwidth, Vertical, degrees 21.0 19.5 20.0 18.0 14.5
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 17 17 15 15 15
Front­to­Back Ratio at 180°, dB 25 25 25 25 25
Isolation, dB 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  580.0 N @ 160 km/h 
130.4 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  1093.0 mm x 353.0 mm x 209.0 mm | 43.0 in x 13.9 in x 8.2 in 
Net Weight  14.5 kg | 32.0 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 36
April 16, 2014
Product Specifications
CVVPX306R3
Argus® Tri­band Antenna, 790–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. 

Electrical Specifications
Frequency Band, MHz 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 14.5 14.8 14.5 15.2 16.2
Beamwidth, Horizontal, degrees 64 62 60 60 62
Beamwidth, Vertical, degrees 14.8 13.5 13.5 12.0 9.5
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18
Front­to­Back Ratio at 180°, dB 25 25 25 25 25
Isolation, dB 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  820.0 N @ 160 km/h 
184.3 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  1560.0 mm x 353.0 mm x 209.0 mm | 61.4 in x 13.9 in x 8.2 in 
Net Weight  21.0 kg | 46.3 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 37
April 16, 2014
Product Specifications
CVVPX308.10R3
Argus® Tri­band Antenna, 790–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. 

Electrical Specifications
Frequency Band, MHz 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 15.8 16.0 16.5 17.2 18.2
Beamwidth, Horizontal, degrees 60 60 65 62 60
Beamwidth, Vertical, degrees 11.0 10.0 8.0 7.0 5.7
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18
Front­to­Back Ratio at 180°, dB 25 25 25 25 25
Isolation, dB 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  1060.0 N @ 160 km/h 
238.3 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2025.0 mm x 354.0 mm x 210.0 mm | 79.7 in x 13.9 in x 8.3 in 
Net Weight  26.0 kg | 57.3 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: March 14, 2014 38
April 16, 2014
Product Specifications
CVVPX310R1
Argus® Tri­band Antenna, 790–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. Bands cascaded SRET. 

Electrical Specifications
Frequency Band, MHz 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 16.5 16.8 16.5 17.0 18.0
Beamwidth, Horizontal, degrees 64 62 60 60 62
Beamwidth, Vertical, degrees 8.8 8.0 8.2 7.2 5.8
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18
Front­to­Back Ratio at 180°, dB 25 25 25 25 25
Isolation, dB 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  1300.0 N @ 160 km/h 
292.3 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2494.0 mm x 353.0 mm x 209.0 mm | 98.2 in x 13.9 in x 8.2 in 
Net Weight  31.0 kg | 68.3 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 39
April 16, 2014
Product Specifications
RVVPX305.10R3
Argus® Multi­band Antenna, 698–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. 

Electrical Specifications
Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain by all Beam Tilts, average, dBi 13.3 13.5 14.1 16.4 16.9 17.4
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.2 ±0.2 ±0.6 ±0.4 ±0.6
0 ° | 13.3  0 ° | 13.6  0 ° | 14.1  0 ° | 16.4  0 ° | 16.9  0 ° | 17.6 
Gain by Beam Tilt, average, dBi  5 ° | 13.3   5 ° | 13.5   5 ° | 14.1   5 ° | 16.4   5 ° | 16.8   5 ° | 17.5 
 10 ° | 13.3   10 ° | 13.5   10 ° | 14.0   10 ° | 16.4   10 ° | 16.9   10 ° | 17.1 
Beamwidth, Horizontal, degrees 68 69 63 62 63 62
Beamwidth, Horizontal Tolerance, degrees ±1.9 ±1.9 ±2 ±2.9 ±4.8 ±6.4
Beamwidth, Vertical, degrees 20.2 18.1 16.6 8.2 7.3 6.0
Beamwidth, Vertical Tolerance, degrees ±1 ±1.1 ±0.8 ±0.5 ±0.6 ±0.5
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18 18
Null Fill, dB ­22 ­22 ­22
Front­to­Back Total Power at 180° ± 30°, dB 24 23 23 23 25 26
CPR at Boresight, dB 17 13 13 21 18 18
CPR at Sector, dB 11 10 8 7 5 4
Isolation, dB 25 25 25 25 25 25
Isolation, Intersystem, dB 28 30 30 27 28 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  570.0 N @ 150 km/h 
128.1 lbf @ 150 km/h 
Wind Speed, maximum  250.0 km/h | 155.3 mph 
Antenna Dimensions, L x W x D  1380.0 mm x 353.0 mm x 209.0 mm | 54.3 in x 13.9 in x 8.2 in 
Net Weight  20.0 kg | 44.1 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: March 27, 2014 40
May 9, 2014
Product Specifications
RVVPX306.11R3
Argus® Multi­band Antenna, 698–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. 

Electrical Specifications
Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain by all Beam Tilts, average, dBi 13.9 14.2 14.8 16.8 17.3 17.7
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.2 ±0.1 ±0.6 ±0.3 ±0.6
0 ° | 13.9  0 ° | 14.2  0 ° | 14.8  0 ° | 16.8  0 ° | 17.2  0 ° | 17.8 
Gain by Beam Tilt, average, dBi  5 ° | 13.9   5 ° | 14.2   5 ° | 14.8   5 ° | 16.8   5 ° | 17.2   5 ° | 17.8 
 10 ° | 13.9   10 ° | 14.1   10 ° | 14.7   10 ° | 16.8   10 ° | 17.3   10 ° | 17.5 
Beamwidth, Horizontal, degrees 68 69 63 62 63 61
Beamwidth, Horizontal Tolerance, degrees ±1.6 ±1.8 ±2 ±2.8 ±5.1 ±6.3
Beamwidth, Vertical, degrees 16.4 14.7 13.4 7.5 6.7 5.4
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.9 ±0.5 ±0.5 ±0.5 ±0.4
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS, dB 20 20 20 21 22 20
Front­to­Back Total Power at 180° ± 30°, dB 25 23 24 23 25 25
CPR at Boresight, dB 16 13 13 21 19 18
CPR at Sector, dB 11 10 8 7 5 5
Isolation, dB 25 25 25 25 25 25
Isolation, Intersystem, dB 25 25 25 25 25 25
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  748.0 N @ 150 km/h 
168.2 lbf @ 150 km/h 
Wind Speed, maximum  250.0 km/h | 155.3 mph 
Antenna Dimensions, L x W x D  1600.0 mm x 353.0 mm x 209.0 mm | 63.0 in x 13.9 in x 8.2 in 
Net Weight  23.0 kg | 50.7 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: February 13, 2014 41
May 9, 2014
Product Specifications
RVVPX308.14R3
Argus® Multi­band Antenna, 698–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. 

Electrical Specifications
Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain by all Beam Tilts, average, dBi 14.8 15.1 15.7 17.6 18.1 18.6
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.2 ±0.2 ±0.6 ±0.3 ±0.6
0 ° | 14.9  0 ° | 15.1  0 ° | 15.7  0 ° | 17.6  0 ° | 18.0  0 ° | 18.6 
Gain by Beam Tilt, average, dBi  5 ° | 14.8   5 ° | 15.1   5 ° | 15.7   5 ° | 17.6   5 ° | 18.0   5 ° | 18.7 
 10 ° | 14.7   10 ° | 15.0   10 ° | 15.6   10 ° | 17.6   10 ° | 18.1   10 ° | 18.3 
Beamwidth, Horizontal, degrees 68 69 63 62 63 62
Beamwidth, Horizontal Tolerance, degrees ±1.2 ±2 ±1.7 ±2.8 ±5.4 ±6.6
Beamwidth, Vertical, degrees 12.4 11.0 10.1 5.8 5.1 4.2
Beamwidth, Vertical Tolerance, degrees ±0.8 ±0.6 ±0.4 ±0.3 ±0.4 ±0.3
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS, dB 21 20 21 20 20 19
Null Fill, dB ­19 ­18 ­19 ­39 ­41 ­37
Front­to­Back Total Power at 180° ± 30°, dB 25 23 24 23 25 25
CPR at Boresight, dB 9 13 18 30 32 34
CPR at Sector, dB 11 10 8 7 5 5
Isolation, dB 25 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  987.0 N @ 150 km/h 
221.9 lbf @ 150 km/h 
Wind Speed, maximum  250.0 km/h | 155.3 mph 
Antenna Dimensions, L x W x D  2065.0 mm x 353.0 mm x 209.0 mm | 81.3 in x 13.9 in x 8.2 in 
Net Weight  28.0 kg | 61.7 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: March 27, 2014 42
May 9, 2014
Product Specifications
RVVPX310R
RVVPX310R--V
Argus® Multi­band Antenna, 698–960 MHz and 2 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. Bands cascaded SRET. 

Electrical Specifications
Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 16.0 16.2 16.5 16.8 17.2 18.0
Beamwidth, Horizontal, degrees 66 63 61 65 62 60
Beamwidth, Vertical, degrees 9.8 8.8 8.0 8.2 7.2 5.8
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18 18
Null Fill, dB ­22 ­22 ­22 ­22 ­22 ­22
Front­to­Back Ratio at 180°, dB 25 25 25 25 25 25
Isolation, dB 25 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 6 
Wind Loading, maximum  1100.0 N @ 160 km/h 
247.3 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2490.0 mm x 296.0 mm x 244.0 mm | 98.0 in x 11.7 in x 9.6 in 
Net Weight  31.0 kg | 68.3 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 43
April 16, 2014
Product Specifications
CV3PX308R1
Argus® Multi Band Antenna, 790–960 MHz and 3 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. Bands cascaded SRET. 

Electrical Specifications
Frequency Band, MHz 790–896 870–960 1710–2170 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.3 15.6 15.4 16.1 16.2
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.5 ±0.5 ±0.5
0 ° | 15.4  0 ° | 15.6  0 ° | 15.5  0 ° | 16.3  0 ° | 16.5 
Gain by Beam Tilt, average, dBi  5 ° | 15.4   5 ° | 15.6   5 ° | 15.4   5 ° | 16.1   5 ° | 16.3 
 10 ° | 15.3   10 ° | 15.5   10 ° | 15.4   10 ° | 15.8   10 ° | 16.0 
Beamwidth, Horizontal, degrees 65 64 61 66 61
Beamwidth, Horizontal Tolerance, degrees ±1.6 ±1.5 ±3 ±5 ±6
Beamwidth, Vertical, degrees 11.1 10.5 9.9 7.8 7.1
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±1.1 ±0.5 ±0.5
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10
USLS, dB 22 23 21 20 19
Front­to­Back Total Power at 180° ± 30°, dB 24 26 23 27 25
CPR at Boresight, dB 17 16 18 19 20
CPR at Sector, dB 9 9 5 6 4
Isolation, dB 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30
VSWR | Return Loss, dB 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, watts 300 300 250 250 250
Polarization ±45° ±45° ±45° ±45° ±45°

*Values calculated using NGMN Alliance N­P­BASTA v9.6   

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 8 
Wind Loading, maximum  951.0 N @ 150 km/h 
213.8 lbf @ 150 km/h 
Wind Speed, maximum  241.0 km/h | 149.8 mph 
Antenna Dimensions, L x W x D  2067.0 mm x 353.0 mm x 209.0 mm | 81.4 in x 13.9 in x 8.2 in 
Net Weight  27.1 kg | 59.7 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 44
May 9, 2014
Product Specifications
CV3PX310R1
Argus® Multi Band Antenna, 790–960 MHz and 3 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. Bands cascaded SRET. 

Electrical Specifications
Band 1 Band 1 Band 2 Band 2 Band 2 Band 3 Band 3 Band 3 Band 4 Band 4 Band 4
1710– 1920– 2300– 1710– 1920– 2300– 1710– 1920– 2300–
Frequency Band, MHz 790–890 890–960
1920 2170 2690 1920 2170 2690 1920 2170 2690
Gain, dBi 16.5 16.8 16.5 17.0 18.0 16.5 17.0 18.0 16.5 16.7 17.7
Beamwidth, Horizontal, 
64 62 60 60 62 60 60 62 60 60 62
degrees
Beamwidth, Vertical, degrees 8.8 8.0 8.0 7.2 5.8 8.0 7.2 5.8 8.0 7.2 5.8
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18 18 18 18 18 18 18
Front­to­Back Ratio at 180°, 
25 25 25 25 25 25 25 25 25 25 25
dB
Isolation, dB 25 25 25 25 25 25 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30 30 30 30 30 30 30
1.43 |  1.43 |  1.5 |  1.5 |  1.5 |  1.5 |  1.5 |  1.5 |  1.5 |  1.5 |  1.5 | 
VSWR | Return Loss, dB
15.0 15.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0
PIM, 3rd Order, 2 x 20 W, 
­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150
dBc
Input Power per Port, 
300 300 250 250 250 250 250 250 250 250 250
maximum, watts
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 8 
Wind Loading, maximum  1320.0 N @ 160 km/h 
296.7 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2533.0 mm x 353.0 mm x 209.0 mm | 99.7 in x 13.9 in x 8.2 in 
Net Weight  36.0 kg | 79.4 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: January 29, 2014 45
April 16, 2014
Product Specifications
RV4PX310B1
Argus® Multi­band Antenna, 698–960 MHz and 4 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. Internal Bias­Tee from port 1 band 1. Bands 
cascaded SRET. 

Electrical Specifications
LB LB LB HB1/HB2 HB1/HB2 HB1/HB2 HB3/HB4 HB3/HB4 HB3/HB4
1710– 1920– 2300– 1710– 1920– 2300–
Frequency Band, MHz 698–790 790–890 890–960
1920 2170 2690 1920 2170 2690
Gain, dBi 16.0 16.2 16.5 16.8 17.2 18.0 16.5 16.9 17.7
Beamwidth, Horizontal, degrees 67 65 62 62 62 62 62 62 62
Beamwidth, Vertical, degrees 9.8 8.8 8.0 8.2 7.2 5.8 8.2 7.2 5.8
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18 18 18 18 18
Null Fill, dB ­22 ­22 ­22 ­22 ­22 ­22 ­22 ­22 ­22
Front­to­Back Ratio at 180°, dB 25 25 25 25 25 25 25 25 25
Isolation, dB 25 25 25 25 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30 30 30 30 30
1.43 |  1.43 |  1.43 | 
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
15.0 15.0 15.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, 
300 300 300 250 250 250 250 250 250
watts
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 10 
Wind Loading, maximum  1320.0 N @ 160 km/h 
296.7 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2533.0 mm x 353.0 mm x 209.0 mm | 99.7 in x 13.9 in x 8.2 in 
Net Weight  37.0 kg | 81.6 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: February 3, 2014 46
April 16, 2014
Product Specifications
RV4PX310R
Argus® Multi­band Antenna, 698–960 MHz and 4 x 1710–2690 
MHz, 65° horizontal beamwidth, internal electrical tilt with 
manual override. Bands cascaded SRET. 

Electrical Specifications
LB LB LB HB1/HB2 HB1/HB2 HB1/HB2 HB3/HB4 HB3/HB4 HB3/HB4
1710– 1920– 2300– 1710– 1920– 2300–
Frequency Band, MHz 698–790 790–890 890–960
1920 2170 2690 1920 2170 2690
Gain, dBi 16.0 16.2 16.5 16.8 17.2 18.0 16.5 16.9 17.7
Beamwidth, Horizontal, degrees 67 65 62 62 62 62 62 62 62
Beamwidth, Vertical, degrees 9.8 8.8 8.0 8.2 7.2 5.8 8.2 7.2 5.8
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS, dB 18 18 18 18 18 18 18 18 18
Null Fill, dB ­22 ­22 ­22 ­22 ­22 ­22 ­22 ­22 ­22
Front­to­Back Ratio at 180°, dB 25 25 25 25 25 25 25 25 25
Isolation, dB 25 25 25 25 25 25 25 25 25
Isolation, Intersystem, dB 30 30 30 30 30 30 30 30 30
1.43 |  1.43 |  1.43 | 
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
15.0 15.0 15.0
PIM, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150 ­150
Input Power per Port, maximum, 
300 300 300 250 250 250 250 250 250
watts
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45°

Mechanical Specifications
Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 10 
Wind Loading, maximum  1320.0 N @ 160 km/h 
296.7 lbf @ 160 km/h 
Wind Speed, maximum  200.0 km/h | 124.3 mph 
Antenna Dimensions, L x W x D  2533.0 mm x 353.0 mm x 209.0 mm | 99.7 in x 13.9 in x 8.2 in 
Net Weight  37.0 kg | 81.6 lb 

©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 1
All specifications are subject to change. See www.commscope.com for the most current information. Revised: March 20, 2014 47
April 16, 2014
We’re proud to be a part
of your network’s story.
Here at CommScope, we embrace our role as
a trusted resource, partner, and facilitator. We
create the infrastructure that connects the world
and evolves with every advance in technology.
By investing all of our capabilities, resources,
relationships, and products into your toughest
challenges, we continue our long history of solving
problems together—paving the way for new ideas
and fresh ways of thinking.

We’re a trusted resource and partner around the

world because we’re invested in you: your people,
your networks, your success. It inspires us to build
relationships and infrastructure… connect people and
technologies across protocols, oceans, and
time zones… and share what we learn along the
way.

This is our promise to you.

This is CommScope.

www.commscope.com
Visit our Web site or contact your local CommScope representative for more information.

© 2014 CommScope, Inc. All rights reserved.

All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services.
CA-106251.2 - EN.GB (05/14)