Scribd Logo
Upload

Welcome to Scribd!

  • 85 views

    Appendix P - Seismic Design Coefficients and Approximate Period Parameters - BNBC 2020 Commentary

    Uploaded by

    Tarif Aziz Maruf
    This appendix provides seismic design coefficients and approximate period parameters for buckling-restrained braced frames (BRBF) and special plate shear walls (SPSW) since these systems are included in the provisions but not defined in other applicable building codes. Table 6.P.1 lists design coefficients and factors like the deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification coefficient (R) for various seismic load resisting systems. Table 6.P.2 gives the values of approximate period parameters Cr and x for BRBFs and SPSWs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Appendix P - Seismic Design Coefficients and Approximate Period Parameters - BNBC 2020 Commentary

    Uploaded by

    Tarif Aziz Maruf
    85 views2 pages
    This appendix provides seismic design coefficients and approximate period parameters for buckling-restrained braced frames (BRBF) and special plate shear walls (SPSW) since these systems are included in the provisions but not defined in other applicable building codes. Table 6.P.1 lists design coefficients and factors like the deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification coefficient (R) for various seismic load resisting systems. Table 6.P.2 gives the values of approximate period parameters Cr and x for BRBFs and SPSWs.

    Original Title

    Appendix P_ Seismic Design Coefficients and Approximate Period Parameters - BNBC 2020 Commentary

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This appendix provides seismic design coefficients and approximate period parameters for buckling-restrained braced frames (BRBF) and special plate shear walls (SPSW) since these systems are included in the provisions but not defined in other applicable building codes. Table 6.P.1 lists design coefficients and factors like the deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification coefficient (R) for various seismic load resisting systems. Table 6.P.2 gives the values of approximate period parameters Cr and x for BRBFs and SPSWs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    85 views2 pages

    Appendix P - Seismic Design Coefficients and Approximate Period Parameters - BNBC 2020 Commentary

    Uploaded by

    Tarif Aziz Maruf
    This appendix provides seismic design coefficients and approximate period parameters for buckling-restrained braced frames (BRBF) and special plate shear walls (SPSW) since these systems are included in the provisions but not defined in other applicable building codes. Table 6.P.1 lists design coefficients and factors like the deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification coefficient (R) for various seismic load resisting systems. Table 6.P.2 gives the values of approximate period parameters Cr and x for BRBFs and SPSWs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    9/30/2020 Appendix P: Seismic Design Coefficients and Approximate Period Parameters - BNBC 2020 Commentary

    BNBC 2020 Commentary


    Bangladesh National Building Code 2020 – Commentary

    Search... 

    Appendix P: Seismic Design Coefficients and


    Approximate Period Parameters

    BNBC 2020, Volume-2, Part-6, Appendix P

    Table Of Contents
    P.1 SCOPE
    P.2 SYMBOLS
    P.3 COEFFICIENTS AND FACTORS FOR BASIC SEISMIC LOAD RESISTING SYSTEMS
    P.4 VALUES OF APPROXIMATE PERIOD PARAMETERS

    P.1 SCOPE
    This appendix contains design coefficients, system limitations and design parameters for seismic load
    resisting systems (SLRS) that are included in these provisions but not yet defined in the applicable building
    code for buckling-restrained braced frames (BRBF) and special plate shear walls (SPSW). The values
    presented in Tables 6.P.1 and 6.P.2 in this Appendix shall only be used where neither the applicable building
    code nor SEI/ASCE 7 contain such values.

    P.2 SYMBOLS
    The following symbols are used in this appendix.

    Cd = Deflection amplification factor

    Cr, x = Parameters used for determining the approximate fundamental period

    Ωo = System overstrength factor

    R = Response modification coefficient

    P.3 COEFFICIENTS AND FACTORS FOR BASIC SEISMIC LOAD RESISTING


    SYSTEMS
    TABLE 6.P.1 Design Coefficients and Factors for Basic Seismic Load Resisting Systems

    https://www.bnbc2020.com/appendix-p-seismic-design-coefficients/ 1/2
    9/30/2020 Appendix P: Seismic Design Coefficients and Approximate Period Parameters - BNBC 2020 Commentary

    (NL = Not Limited)

    P.4 VALUES OF APPROXIMATE PERIOD PARAMETERS


    Table 6.P.2 Values of Approximate Period Parameters Cr and x

    Structure Type Cr x
    Buckling-Restrained Braced Frames 0.03 0.75
    Special Plate Shear Walls 0.02 0.75

    https://www.bnbc2020.com/appendix-p-seismic-design-coefficients/ 2/2

    You might also like