Universal Benchtop Featur

Universes
Digital Controllers Input
al

With Optional Embedded Ethernet Connectivity

CS8DPT shown smaller

CS8DPT than actual size.

U Universal Inputs: The OMEGA® CS8DPT is a portable communications, Modbus®, and

Thermocouple, RTD, benchtop digital controller and with Ethernet.
Thermistor, Process a large color-changing display. The universal temperature and
The PLATINUM Series meters process instrument handles 10
Voltage/Current, feature dual LED displays that common types of thermocouples,
and Strain can be programmed to change thermistors, multiple RTDs, and
U Simple to Configure color between Green, Amber, several process (DC) voltage
and Use and Red at any setpoint or alarm current ranges and strain inputs.
point. Other options include, serial
U Optional RS232/485
and Ethernet
Communications
LabVIEW™ Driver 
U High Accuracy The PLATINUM LabVIEW driver
U Internal 5A SSR is the National Instrument device
Control Output driver for communicating with
U 5-Year Warranty OMEGA® PLATINUM Controllers
via Modbus RTU/ASCII and
U Dual Display Standard, Modbus TCP protocols. The driver
Indicates Both Setpoint allows easy access to the internal
and Real-Time Process data, configuration settings,
and operating functions of the
U Totally Programmable PLATINUM product family.
Color Displays, Standard The LabVIEW instrument driver reduces the application development time
U Operates from 90 to and simplifies instrument control. With the PLATINUM LabVIEW driver,
240 Vac @ 50/60 Hz customers can quickly communicate with the instrument and develop
robust test applications and software. 

1
Just Hook Up Your Sensor, Plug in Your Heater, and
You’re Ready to Go!

ETHERNET
F1 F2 F3
SE

SE
O -
FU
O/I

SE
FU
FU

The power, fuses and outputs are located on

the rear panel of the Benchtop Digital Controller.
The optional Ethernet port is also located at the
rear of the unit.
ISO ANALOG

AC MAIN INPUT
90-240 VAC ~ 50 / 60 Hz
OUTPUT 1
90-240 VAC ~ 3A
OUTPUT 2
90-240 VAC ~ 5A CS8DPT-C24-EIP-A Rear Panel.

Input Type Description Range Accuracy

Process/Strain Process Voltage ±50 mV, ±100 mV, ±1 Vdc, ±10 Vdc 0.03% FS

Process Process Current Scalable within 0 to 24 mA 0.03% FS

Iron-Constantan -210 to 1200°C (-346 to 2192°F) 0.4°C (0.7°F)

-270 to -160°C (-454 to -256°F) 1.0°C (1.8°F)

CHROMEGA®-ALOMEGA®
-160 to 1372°C (-256 to 2502°F) 0.4°C (0.7°F)

-270 to -190°C (-454 to -310°F) 1.0°C (1.8°F)

Copper-Constantan
-190 to 400°C (-310 to 752°F) 0.4°C (0.7°F)

-270 to -220°C (-454 to -364°F) 1.0°C (1.8°F)

CHROMEGA®-Constantan
-220 to 1000°C (-364 to 1832°F) 0.4°C (0.7°F)

-50 to 40°C (-58 to 104°F) 1.0°C (1.8°F)

Pt/13%Rh-Pt
40 to 1788°C (104 to 3250°F) 0.5°C (0.9°F)

-50 to 100°C (-58 to 212°F) 1.0°C (1.8°F)

Pt/10%Rh-Pt
100 to 1768°C (212 to 3214°F) 0.5°C (0.9°F)

100 to 640°C (212 to 1184°F) 1.0°C (1.8°F)

30%Rh-Pt/6%Rh-Pt
640 to 1820°C (1184 to 3308°F) 0.5°C (0.9°F)

5%Re-W/26%Re-W 0 to 2320°C (32 to 4208°F) 0.4°C (0.7°F)

-250 to -100°C (-418 to -148°F) 1.0°C (1.8°F)

Nicrosil-Nisil
-100 to 1300°C (-148 to 2372°F) 0.4°C (0.7°F)

Pt, 0.00385, 100Ω, 500Ω, 1000Ω -200 to 850°C (-328 to 1562°F) 0.3°C (0.7°F)

Pt, 0.003916, 100Ω -200 to 660°C (-328 to 1220°F) 0.3°C (0.7°F)

Pt, 0.00392, 100Ω -200 to 660°C (-328 to 1220°F) 0.3°C (0.7°F)

Thermistor 2252Ω -40 to 120°C (-40 to 248°F) 0.2°C (0.35°F)

Thermistor 5K Ω -30 to 140°C (-22 to 284°F) 0.2°C (0.35°F)

Thermistor 10K Ω -20 to 150°C (-4 to 302°F) 0.2°C (0.35°F)

2
Specifications Thermocouple Type (ITS 90): Network and Communications
Accuracy: See table on page 2 J, K, T, E, R, S, B, C, N, L Ethernet: IEEE 802.3 10/100
Resolution: 1°/0.1°; 10 µV process RTD Input (ITS 90): 100/500/1000Ω Pt Supported Protocols: TCP/IP, ARP,
Temperature Stability: sensor; 2-, 3- or 4-wire; HTTPGET
RTD: 0.04°C/°C 0.00385 or 0.00392 curve RS232/RS485: Selectable from menu;
Thermocouple: 25°C (77°F); cold- Thermistor Input: 2252Ω, 5kΩ, both ASCII and Modbus protocol
junction compensation of 0.05°C/°C and 10kΩ selectable from menu; programmable
Process: 50 ppm/°C Voltage Input: -100 to 100 mV, -1 to 1200 to 115K baud; complete
CMRR: 120 dB 1 Vdc, 0 to 10 Vdc programmable setup capability; program
A/D Conversion: Dual-slope Current Input: 4 to 20 mA to transmit current display, alarm status,
Reading Rate: 20 samples per second Strain Inputs: ±50, ±100 mV min/max, actual measured input value
Digital Filter: Programmable Configuration: Differential and status
Display: 4-digit, 9-segment LED Polarity: Bipolar Connection: USB, Ethernet (option),
with size 21 mm (83") and 10.2 mm Decimal Selection: None or 0.1 for Series (option)
(40"); Red, Green, and Amber, temperature; None, 0.1, 0.01 or General
and programmable colors for process 0.001 for process Power: 90 to 240 Vac, 50 to 60 Hz
variable, and temperature units Control Output: 5A SSR (internal), Dimensions: 236 W x 230 D x 108 mm H
Input Types: Thermocouple, RTD, 3A relay max, analog process output (9.3" x 9.1" x 4.3")
thermistor, analog voltage, analog Excitation: Firmware selectable to 5, Weight: 1.13 kg (2.5 lb)
current and strain 10, 12, and 24 Vdc @ 25 mA
Note: Power cords are available from
OMEGA.

The OMEGA Dashboard Windows® web server provides

a comprehensive data logging, charting and alarm
notification system for all OMEGA iServer web connected
devices, including PLATINUM series, iSeries, and all
OMEGA wireless products. Users may view charts and
graphs, monitor and record readings and receive alarm
information from virtually any type of iServer connected
transducer on any computer, tablet, or smartphone that
supports a web browser.

To Order
Model No. Description
CS8DPT Benchtop controller, universal input
CS8DPT-C24-EIP-A Benchtop controller with embedded ethernet, serial communication, and isolated
analog output
Comes complete with 2 output cords, wire kit (for RTD and bridge inputs only) and quick start manual.

Power Cord Option

Model No. Description
POWER CORD-DM Power cord with connector for Denmark
POWER CORD-E-10A Power cord with connector for Continental Europe
POWER CORD-IT Power cord with connector for Italy or Ireland
POWER CORD-SE Power cord with stripped ends (no connection), all countries 250 Vac max
POWER CORD-UK Power cord with connector for United Kingdom
POWER CORD-MOLDED Power cord with connector for North America (USA, Mexico, Canada),
standard 120 Vac