0% found this document useful (0 votes)
135 views8 pages

World TBA - InertiaPM5

The Inertia PM5 vessel is designed for crew and cargo transfer for the offshore wind industry. It uses a trimaran hull configuration and hydrofoil technology to provide excellent seakeeping abilities and reduced motion, along with accommodations for up to 36 passengers. The vessel has a top speed of 29 knots when lightly loaded and a service speed of 25 knots when fully loaded, with fuel-efficient waterjet propulsion.

Uploaded by

Aswar Awa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
135 views8 pages

World TBA - InertiaPM5

The Inertia PM5 vessel is designed for crew and cargo transfer for the offshore wind industry. It uses a trimaran hull configuration and hydrofoil technology to provide excellent seakeeping abilities and reduced motion, along with accommodations for up to 36 passengers. The vessel has a top speed of 29 knots when lightly loaded and a service speed of 25 knots when fully loaded, with fuel-efficient waterjet propulsion.

Uploaded by

Aswar Awa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Vessel Specification

World Marine Offshore | Torskekaj 1 | 6700 Esbjerg, Denmark | +45 75 50 40 50 | [email protected] | www.wm-offshore.com
INERTIA PM5

Suitable for transfer of crew and cargo to wind indu­stry,


crew change vessel, survey, ROV, standby rescue and
guard duties.
The vessel design is a proven concept within support
vessels for offshore industry and is 3rd generation of the
design.

• Inertia PM5 is a combination of the best perfor­mances from a


trimaran, catamaran and a mono hull
• An adjustable Hydrofoil of 15 sq. m horisontal firm plate is
mounted at the bottom of the centre hull, which reduces the
heave movements and optimizes trim of the vessel

The hull shape combined with the high speed and


seaworthiness performed by the Trima­ran hull concept
and the Swath technology (Small water plane twin hull)
provide excellent seaworthi­ness and fuel economy when
the vessel is in transit speed as a Trimaran.

• Hull form of the Trimaran gives crew and pas­sengers


optimal sea comfort and less fatigue, and reduced slamming
• Accommodation and wheel house placed aft on the vessel,
to reduce heave and pitch for improved seacomfort for both
passenger and crew

World Marine Offshore | Torskekaj 1 | 6700 Esbjerg, Denmark | +45 75 50 40 50 | [email protected] | www.wm-offshore.com
INERTIA PM5

VESSEL ACCOMMODATION ACTIVE RIDE CONTROL

Inertia PM5 can transport 24 passengers The vessels have an ACTIVE Ride Control
in business class seats or alternatively system in­stalled that reduces roll and
accommodate 12 passengers in 6 double pitch motions onboard. The ACTIVE
cabins, so the passengers and crew can system also includes automatic trim and
re­main offshore for 1-10 days. list control moreover compensating for
The design is highly equipped for good cross winds or uneven loadings - all in
comfort for passengers. All seats are one system.
business class similar to airplanes, able
to adjust sleeping mode, with necessary The fast electric actuated interceptors are
entertainment, Wi-Fi, etc. controlled by the most advanced control
system ”ACTIVE” to counteract the
The vessel has 5 single and optional wave induced roll and pitch motions of a
double cabins with toilet and shower vessel to improve on board comfort and
facilities. The living quarters also incl. opera­bility of the vessel.
galley, mess room, change room, office, It gives between 23-48% roll and pitch
saloon and all necessary equipment for reduction in 1.5 to 3 meter wave height, a
living onboard. fuel saving of around 7% and the speed is
increasing by 1.4 to 1.5 knots.

World Marine Offshore | Torskekaj 1 | 6700 Esbjerg, Denmark | +45 75 50 40 50 | [email protected] | www.wm-offshore.com
INERTIA PM5

SOFT BOW - ACTIVE GANGWAY

The Soft Bow is an active impact reducing


system which is built into the hull of the
vessel. The Soft Bow is reducing the load
impact on the boatlanding system on turbine,
offshore vessel/instal­lations by up to 50% and
thereby keeping the land­ing load within the
manufactures limitations of the boat landings.

• Reduce the impact load with minimum 50%


• Enable up to 8 times higher approach speed
• Maintaining the impact load inside design
criteria.
• Fully automatic system and logging all data.
• Can be integrated to DP system
• Operated by touch screen panel
• Produced as a box system for easy built into the
vessel
• Low maintenance cost, due to simple
construction
• Safe transfer due to keeping constant contact to
the boat landing
• World Patent

World Marine Offshore | Torskekaj 1 | 6700 Esbjerg, Denmark | +45 75 50 40 50 | [email protected] | www.wm-offshore.com
INERTIA PM5

DATA SHEET

MAIN
Design Inertia PM5
Built 2016/2017
Class BV
Flag Danish
Passengers 24-36
Crew 5
Cabins 5 single cabins with own toilet and shower
Hull Aluminium
Lenght o.a. (m) 32
Beam (m) 12.2
Draught transit/service 1.6/2.8
Bunker capacity (liters) 40,000
Fresh water + watermaker 2 tons/day 1,600 l
Max deadweight (t) 34.7
Total forward deck capacity (m²) 110
Total aft deck capacity (m²) 35
Forward deck dimensions (m) 17.24 x 12
Main engine 3 x Scania 736 kW
2 x Visedo PM electrical generator 640 kW
Waterjets 3 x Hamilton HM571 in centre hull
2 x Hamilton HM461 in side hull
Bow thruster 2 x electrical bow thrusters 100 kW
Battery bank 1 x 42 kW/h for outlet peak 200 kW

World Marine Offshore | Torskekaj 1 | 6700 Esbjerg, Denmark | +45 75 50 40 50 | [email protected] | www.wm-offshore.com
INERTIA PM5

Sprint speed 29 kn (5 tons deadweight)


Service speed 25 kn (15 tons deadweight)
Bunker consumption (l/h at max speed) 450
Soft Bow (active impact force reduction) Yes

CARGO HANDLING
Max cargo capacity on deck (t) 20
Deck strenght (t/m²) 1.5
Deck crane (option) TMP900K
Max lifting capacity (kg) 3,000
Max lifting capacity at max outreach 890kg @ 9.3m

NAVIGATION AND COMMUNICATION


Radar 1 x Sperry X-band
1 x S band
Electronic chart ECDIS
AIS Sperry class A
GMDSS A1/A2
Heading system Sperry GPS Magnetic Compass
GPS Sperry
Depth sounder Sperry
VHF 1 x Fixed Sailor
3 x Sailor (Handheld)
Navtex Sperry

World Marine Offshore | Torskekaj 1 | 6700 Esbjerg, Denmark | +45 75 50 40 50 | [email protected] | www.wm-offshore.com

You might also like