Scribd Logo
Upload

Welcome to Scribd!

  • 115 views

    Borang Pemeriksaan Air Kompressor

    Uploaded by

    Andara Asifa Yudiana
    This document is an air compressor inspection checklist from the Occupational Safety and Health Section of Universiti Tun Hussein Onn Malaysia. The checklist contains 12 inspection items to check the air receiver and safety of the compressor. These include checking for proper pressure gauges and safety valves, draining of accumulated oil and water, leaks, filters, guards, secure installation, and electric safety cut-off. The inspection is signed off by an assistant engineer, safety liaison officer, and laboratory manager once completed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Borang Pemeriksaan Air Kompressor

    Uploaded by

    Andara Asifa Yudiana
    115 views1 page
    This document is an air compressor inspection checklist from the Occupational Safety and Health Section of Universiti Tun Hussein Onn Malaysia. The checklist contains 12 inspection items to check the air receiver and safety of the compressor. These include checking for proper pressure gauges and safety valves, draining of accumulated oil and water, leaks, filters, guards, secure installation, and electric safety cut-off. The inspection is signed off by an assistant engineer, safety liaison officer, and laboratory manager once completed.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an air compressor inspection checklist from the Occupational Safety and Health Section of Universiti Tun Hussein Onn Malaysia. The checklist contains 12 inspection items to check the air receiver and safety of the compressor. These include checking for proper pressure gauges and safety valves, draining of accumulated oil and water, leaks, filters, guards, secure installation, and electric safety cut-off. The inspection is signed off by an assistant engineer, safety liaison officer, and laboratory manager once completed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    115 views1 page

    Borang Pemeriksaan Air Kompressor

    Uploaded by

    Andara Asifa Yudiana
    This document is an air compressor inspection checklist from the Occupational Safety and Health Section of Universiti Tun Hussein Onn Malaysia. The checklist contains 12 inspection items to check the air receiver and safety of the compressor. These include checking for proper pressure gauges and safety valves, draining of accumulated oil and water, leaks, filters, guards, secure installation, and electric safety cut-off. The inspection is signed off by an assistant engineer, safety liaison officer, and laboratory manager once completed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    UTHM/OSHE/UKKJ.

    005

    BAHAGIAN PERSEKITARAN, KESELAMATAN DAN KESIHATAN PEKERJAAN


    UNIVERSITI TUN HUSSEIN ONN MALAYSIA

    AIR COMPRESSOR INSPECTION CHECKLIST

    FACULTY
    PERSON IN CHARGE DESIGNATION
    LABORATORY CONTACT NO
    PURPOSE Weekly Monthly Improvement DATE OF INSP.
    MODEL PMT NO
    JKKP C.F NO VALIDITY INSP. RESULT GOOD FAIR POOR

    A AIR RECEIVER CHECKLIST GOOD DEFECT REMARKS


    1 Are compressor equipped with pressure gauges and springloaded safety valves?

    2 Are compressor provided with a drain valve and removal of accumulated oil and water?

    3 Observed that the receiver is cutting out at the correct maximum presurre?

    4 Is there any external signs of damage to the receiver or component parts?

    5 Are safety devices on compressor air systems checked frequently ?

    6 Check for leaks on receiver, fittings, delivery lines and coupling?

    7 Are air filters installed on the compressor intake ?

    8 Are all pulley guards in place and secure?

    9 Is the motor pulley and flywheel in line?

    10 Check crankcase oil & top up if required?

    11 Is equipment securely installed?

    12 Is the power supplied via ELCB?

    DETAILS INSPECTED BY * Assistant Engineer SIGNATURE


    Name
    Designation
    PTj

    Contact No. Date Time

    DETAILS ACKNOWLEDGED BY (Safety Liasion Officer) SIGNATURE

    Name

    Designation
    PTj
    Contact No. Date Time

    DETAILS APPROVED BY LABORATORY MANAGER SIGNATURE


    Name
    Designation
    Status APPROVED NOT APPROVED
    Contact No. Date Time

    You might also like