Scribd
Upload
29 views2 pages

Pee OP

The JSON document contains information about 3D printer settings and instructions for a 3D print job. It includes details like the filament used, layer height, print area dimensions, temperature settings and instructions for each layer of the print.

Uploaded by

Elite Geeks
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
29 views2 pages

Pee OP

The JSON document contains information about 3D printer settings and instructions for a 3D print job. It includes details like the filament used, layer height, print area dimensions, temperature settings and instructions for each layer of the print.

Uploaded by

Elite Geeks
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

;FLAVOR:Marlin

;TIME:1658
;Filament used: 0.828566m
;Layer height: 0.2
;MINX:103.45
;MINY:102.7
;MINZ:0.14
;MAXX:146.55
;MAXY:108.215
;MAXZ:40.14
;ARCWELDERPROCESSED
;LINEARADVANCEPROCESSED
; Postprocessed by [ArcWelder](https://github.com/FormerLurker/ArcWelderLib)
; Copyright(C) 2020 - Brad Hochgesang
; resolution=0.05mm
; path_tolerance=1%
; max_radius=1000000.00mm
; firmware_compensation=True
; mm_per_arc_segment=1.00mm
; min_arc_segments=12
; default_xyz_precision=3
; default_e_precision=5

;Generated with Cura_SteamEngine 4.8.0


M82 ;absolute extrusion mode
G21 ; set units to millimeters
G90 ; use absolute positioning
M83 ; extruder relative mode
M900 K30
M104 S220 ; set extruder temp
M140 S40 ; set bed temp
M190 S40 ; wait for bed temp
M109 S220 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G92 E0.0 ; reset extruder distance position
G1 Y-3.0 F1000.0 ; go outside print area
G1 X60.0 E9.0 F1000.0 ; intro line
G1 X100.0 E21.5 F1000.0 ; intro line
G92 E0.0 ; reset extruder distance position
M83 ;relative extrusion mode
;LAYER_COUNT:201
M900 K0.000000 T0 ;added by LinearAdvanceSettingPlugin
;LAYER:0
M107
M204 S800
M205 X8 Y8
;MESH:clip_on_40mm_fan_cover_v2.stl
G0 F1800 X144.209 Y107.298 Z0.14
M205 X4 Y4
;TYPE:WALL-OUTER
G1 F1200 X105.791 Y107.298 E1.12925
G1 X105.791 Y105.802 E0.04397
G1 X144.209 Y105.802 E1.12925
G1 X144.209 Y107.298 E0.04397
M205 X8 Y8
G0 F1800 X144.084 Y107.298
G0 X143.654 Y106.743
G0 X143.705 Y106.794
M104 S220
M205 X4 Y4
;TYPE:WALL-INNER
G1 F1200 X106.295 Y106.794 E1.09962
G1 X106.295 Y106.306 E0.01434
G1 X143.705 Y106.306 E1.09962
G1 X143.705 Y106.794 E0.01434
M205 X8 Y8
;MESH:NONMESH
G0 F600 X143.705 Y106.794 Z0.34
G0 F1800 X144.499 Y107.3
;TIME_ELAPSED:14.130164
;LAYER:1
M106 S255
M205 X4 Y4
;TYPE:WALL-OUTER

You might also like