DC Pass

Power Splitter/Combiner ZAPD-50W+

2 Way-0° 50Ω 4200 to 6000 MHz
Maximum Ratings Features
Operating Temperature -55°C to 100°C • low insertion loss, 0.3 dB typ. Generic photo used for illustration purposes only

Storage Temperature -55°C to 100°C

• good isolation, 26 dB typ. CASE STYLE: F14
• up to 10W power input as splitter Connectors Model
Power Input (as a splitter) 10W max. • excellent amplitude unbalance, 0.1 dB typ. N-TYPE ZAPD-50W-N+
Internal Dissipation 0.125W max. • excellent phase unbalance, 1 deg. typ.
DC Current 500 mA (250mA for each port) • excellent VSWR, 1.15:1 typ. +RoHS Compliant
Permanent damage may occur if any of these limits are exceeded. • rugged shielded case The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Coaxial Connections Applications
SUM PORT S • wireless
PORT 1 1 • defense
PORT 2 2
• communications Electrical Specifications
FREQ. ISOLATION INSERTION LOSS(dB) PHASE AMPLITUDE VSWR
RANGE (dB) ABOVE 3.0 dB UNBALANCE UNBALANCE (:1)
(MHz) (Degrees) (dB)

S OUT
fL-fU Typ. Min. Typ. Max. Max. Max. Typ. Max. Typ. Max.
Outline Drawing
4200-6000 26 16 0.3 0.8 5 0.7 — — — —

Typical Performance Data

Frequency Total Loss1 Amplitude Isolation VSWR VSWR VSWR
(MHz) (dB) Unbalance (dB) S 1 2
(dB)
S-1 S-2

4200.00 3.25 3.27 0.02 22.67 1.22 1.07 1.12
4210.00 3.26 3.29 0.03 22.77 1.21 1.07 1.12
4332.50 3.25 3.28 0.03 24.57 1.19 1.06 1.11
4455.00 3.27 3.30 0.04 26.77 1.17 1.06 1.11
4577.50 3.28 3.32 0.04 29.78 1.15 1.05 1.11

4700.00 3.27 3.32 0.05 34.24 1.13 1.05 1.11
4710.00 3.27 3.32 0.06 34.56 1.12 1.05 1.11
4832.50 3.32 3.37 0.05 40.68 1.10 1.06 1.11
Outline Dimensions ( inch
mm ) 4955.00 3.34 3.39 0.05 37.99 1.08 1.07 1.12
A B C D E F G 5077.50 3.35 3.40 0.05 32.96 1.06 1.08 1.12

2.00 2.00 0.75 1.00 0.25 1.500 0.125 5200.00 3.37 3.41 0.04 29.43 1.05 1.09 1.13
50.80 50.80 19.05 25.40 6.35 38.10 3.18 5400.00 3.36 3.40 0.04 25.79 1.03 1.12 1.14
5600.00 3.33 3.39 0.06 23.24 1.02 1.15 1.16
5800.00 3.35 3.40 0.06 21.34 1.05 1.20 1.18
H J K L wt 6000.00 3.39 3.42 0.04 19.75 1.09 1.25 1.21
0.39 1.00 0.50 1.00 grams 1. Total Loss = Insertion Loss + 3dB splitter loss.
9.91 25.40 12.70 25.40 170.0
ZAPD-50W+ ZAPD-50W+
TOTAL LOSS ISOLATION
3.5 50
45
3.4
TOTAL LOSS (dB)

ISOLATION (dB)

40
3.3 35

3.2 30
25
3.1
20
S-1(dB) S-2(dB)
3.0 15
4200 4400 4600 4800 5000 5200 5400 5600 5800 6000 4200 4400 4600 4800 5000 5200 5400 5600 5800 6000
FREQUENCY (MHz) FREQUENCY (MHz)

ZAPD-50W+
VSWR
1.3
#S-VSWR #1-VSWR #2-VSWR
electrical schematic
PORT 1
1.2 DC THROUGH
RF+DC
VSWR

PORT S
1.1 RF+DC
PORT 2
1.0 RF+DC
4200 4400 4600 4800 5000 5200 5400 5600 5800 6000
FREQUENCY (MHz)

Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. REV. E
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. M151107
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled ZAPD-50W+
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp HY/TD/CP/AM

Mini-Circuits
® 200610

www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]