5G Standalone Access Registration UE.

pdf

User Equipment 5G NodeB

UE gNB

UE Interactions: 5G Standalone Access Registration

Preconditions
1:RRC_IDLE The UE is in RRC idle state

5G-NR RRC Connection Setup

2:Msg1: Preamble The UE picks a random preamble. The preamble is referenced with the
Zadoff-Chu sequence Random Access Preamble Id (RAPID). The preamble transmission is a
Zadoff-Chu sequence.

3:T300 Start T300 to await the RRC Setup message from the network.

4:Start decoding the PDCCH for the In response to a PRACH transmission, a UE attempts to detect a DCI
RA-RNTI Format 1_0 with CRC scrambled by a the RA-RNTI corresponding to the
RACH transmission. The UE looks for message during a configured window
of length ra-ResponseWindow.

5:PDCCH DCI Format 1_0 [RA-RNTI] The RA-RNTI scrambled DCI message signals the frequency and time
Frequency domain resource assignment, resources assigned for the transmission of the Transport Block containing
Time domain resource assignment, the Random Access Response message.
Downlink MCS

6:Msg2: Random Access Response The UE detects a DCI Format 1_0 with CRC scrambled by the
Timing Advance Command, corresponding RA-RNTI and receives a transport block in a corresponding
UL Grant = { Frequency hopping flag, Msg3 PUSCH frequency+time resource allocation, PDSCH. The RAR carries the timing advance, uplink grant and the
Uplink MCS, TPC command, CSI request}, Temporary C-RNTI assignment.
Temporary C-RNTI

7:ue-identity = Random number UE picks a random identity that will be used during contention resolution.
between 0 and 2^39-1

8:Extract UL Grant from the RAR The uplink allocation contained in the RAR will be used to transmit Msg3
(RRC Setup Request).

9:Msg3: RRCSetupRequest The RRC Setup Request is sent with the random ue-Identity and an
ue-Identity, establishment cause.
establishmentCause

10:PDCCH DCI Format 1_0 [C-RNTI] The C-RNTI scrambled DCI message signals the frequency and time
Frequency domain resource assignment, resources assigned for the transmission of the Transport Block containing
Time domain resource assignment, the RRC Setup message.
Downlink MCS

13-Feb-19 Generated with EventStudio System Designer - https://www.EventHelix.com/EventStudio/ 1

5G Standalone Access Registration UE.pdf

User Equipment 5G NodeB

UE gNB

11:Msg4: RRCSetup The RRC Setup message is sent to setup SRB1 and the master cell. The
radioBearerConfig {srb-ToAddModList}, message carries the radioBearerConfig and masterCellGroup information
masterCellGroup {cellGroupId, rlc-BearerToAddModList, mac-CellGroupConfig, elements.
physicalCellGroupConfig}

12:T300 The UE stops T300 as it has received the RRC Setup message.

13:RRC_CONNECTED

14:Perform the cell group

configuration procedure

15:Perform the radio bearer

configuration procedure

16:PDCCH DCI Format 0_0 [C-RNTI] The gNB assigns uplink resource to the UE so that it can send the RRC
Frequency domain resource assignment, Setup Complete message.
Time domain resource assignment,
Uplink MCS

17:Prepare the Registration Request

NAS message

18:RRCSetupComplete The UE sends the RRC Setup Complete message with a "Registration
[dedicatedNAS-Message: Registration Request] Request" in the dedicatedNAS-Message field.
NAS Registration Request = {Registration type, 5G-GUTI, Last TAI, Requested NSSAI, UE
Capability, List of PDU Sessions}

19:NAS Identity Request The New AMF requests UE Identity (SUCI) from the UE via a NAS message.
Security header type,
Identity request message identity,
Identity type

20:Derive SUCI from the Home PLMN

public key

21:NAS Identity Response The UE responds to the Identity Request.

Security header type,
Identity response message identity,
Mobile identity

NAS Authentication and Security

13-Feb-19 Generated with EventStudio System Designer - https://www.EventHelix.com/EventStudio/ 2

5G Standalone Access Registration UE.pdf

User Equipment 5G NodeB

UE gNB

22:NAS Authentication Request Initiate the authentication procedure with the UE. Send the key selector,
ngKSI, RAND and AUTN to the UE.
RAND,
AUTN,
ABBA

23:NAS Authentication Response The UE responds to the authentication challenge.

Authentication response parameter

24:NAS Security Mode Command The AMF signals the selected NAS security algorithm to the UE. The AMF
Selected NAS security algorithms, also requests the IMEISV from the UE.
Replayed UE security capabilities,
IMEISV request,
ngKSI,
Additional 5G security information

25:NAS Security Mode Complete The UE signals the completion of the NAS security procedure. The message
NAS message container, contains the IMEISV.
IMEISV

5G-NR AS Security Procedure

26:SecurityModeCommand
securityConfigSMC {securityAlgorithmConfig}

27:Derive the K-gNB key K-gNB is a key derived by UE and AMF from K-AMF.

28:Derive K-RRC-int key associated

with the Integrity Protection Algorithm

29:Verify the integrity protection of the

Security Mode Command message

30:Derive K-UP-int key associated with

the Integrity Protection Algorithm

31:Start SRB Integrity Protect Configure lower layers to apply SRB integrity protection using the indicated
algorithm and the K-RRC-int key immediately.

32:SecurityModeComplete The security mode complete message confirms the successful completion
of the security mode command. This message is integrity protected but not
ciphered. Ciphering will start immediately after sending this message.

13-Feb-19 Generated with EventStudio System Designer - https://www.EventHelix.com/EventStudio/ 3

5G Standalone Access Registration UE.pdf

User Equipment 5G NodeB

UE gNB

33:Start SRB Ciphering Configure lower layers to apply SRB ciphering using the indicated
algorithm, the K-RRC-enc key after completing the procedure. The Security
Mode Complete message is not ciphered.

5G-NR RRC Reconfiguration

34:RRCReconfiguration The RRC Reconfiguration message is sent to the UE for setting up radio
[Registration Accept bearers, setup a secondary cell and initiate UE measurements.
(5GS registration result,
PDU session status)]
masterCellGroup,
secondaryCellGroup,
radioBearerConfig (drb-ToAddModList),
MeasConfig (Measurement Config)

35:Perform the primary cell group

configuration procedure

36:Perform the secondary cell group

configuration procedure

37:Perform the radio bearer

configuration procedure

38:Initiate measurements based on the

received MeasConfig

39:Process the Registration Accept

NAS message and setup PDU sessions

40:RRCReconfigurationComplete Confirm the successful completion of an RRC connection reconfiguration.

uplinkTxDirectCurrentList [ {servCellIndex, uplinkDirectCurrentBWP}]

41:NAS Registration Complete The UE signals the completion of the registration via the "Registration
Complete" message to the AMF.

Start Downlink and Uplink Data Transfer

42:Uplink Data Since the uplink path has been setup completely, the UE starts sending
data. The gNB sends the UE data to the Uplink TEID.

13-Feb-19 Generated with EventStudio System Designer - https://www.EventHelix.com/EventStudio/ 4

5G Standalone Access Registration UE.pdf

User Equipment 5G NodeB

UE gNB

43:Downlink Data The UPF sends the buffered data to the gNB using the Downlink TEID for
DTEID the PDU session. All new downlink data also takes the same path.

13-Feb-19 Generated with EventStudio System Designer - https://www.EventHelix.com/EventStudio/ 5