Scribd
Upload
32 views2 pages

Telecommunication Engineering MID Performance For Sec-E: For All Groups Time: 30 Mins

The document provides instructions for members of a telecommunication engineering class to complete a lab performance. Members are assigned different tasks like generating graphs to analyze modulation schemes, simulating fiber optic systems in OptiSystem software, and analyzing results for different channel lengths and scenarios.

Uploaded by

saikat ghosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
32 views2 pages

Telecommunication Engineering MID Performance For Sec-E: For All Groups Time: 30 Mins

The document provides instructions for members of a telecommunication engineering class to complete a lab performance. Members are assigned different tasks like generating graphs to analyze modulation schemes, simulating fiber optic systems in OptiSystem software, and analyzing results for different channel lengths and scenarios.

Uploaded by

saikat ghosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Telecommunication Engineering MID performance

For Sec-E

For all Groups


Time: 30 mins

Member-1
With the help of the code provided for Exp-1, please generate a Eb/No Vs  plot and then
discuss, what does power-limited and bandwidth-limited region mean? Consider a noise-
only limited wireless communication channel. Assume receiver noise is flat over the
channel bandwidth B.
As being system designer; you are given with the following scenarios for an arbitrary
data rate R.
Scenario 1: R=0.2B,
Scenario 2: R=B,
Scenario 3: R=2B.

Identify which region in the plot you would rather consider for operating the system and
mention your considerations for designing the system for all these scenarios.

NB. Answer script must contain the generated graph.

Member-2
With the help of the code provided for Exp-2 please generate a graph showing Bit error
probability for 4 X 4 QAM and 16-point orthogonal signal sets.
Explain with proper reasoning that which one is the best modulation scheme between
them.
NB. Answer script must contain the generated graph.

Member-3
Design a Fiber Optic Communication System using “optisystem” software and take the
reading for the given channel length and comment on the change of Eye-Diagram you
observe for three different channel length.

Fiber Length in Km Received power in dBm Max Q Factor Min BER Eye Hight
50
80
120

NB. Answer script must contain the simulation layout (screen shot will work), Eye-
diagram for three different length.
Member-4
With the help of the code provided for Exp-2 please generate a graph showing Bit error
probability for 64-PAM and 8 X 8 QAM.
Explain with proper reasoning that which one is the best modulation scheme between
them.
NB. Answer script must contain the generated graph.

Member-5
Design a Fiber Optic Communication System using “optisystem” software and take the
reading for the given channel length and comment on the change of Signal to Noise Ratio
and Min BER for three different channel length.

Fiber Length in Km Received power in dBm Max Q Factor Min BER Eye Hight
50
90
130

NB. Answer script must contain the simulation layout (screen shot will work).

Instructions:

1. Please prepare an answer script (word/pdf) containing all solutions, graphs, data,
discussion, and code.
2. Rename the file as-
Telecom_Lab_Sec_Student’s First Name_Student’s ID_Performance.
[For example- Telecom_Lab_E_Tareq_19_12345_01_Performance]

3. Submission: Email to “[email protected]”

*** Don’t forget to write the subject “Telecom_lab_Sec_Performance” in the subject box of the
email.

[NOTE: Please keep or reduce the file size within 500 KB]

You might also like