Product

Catalog

ISO 9001, APPROVED

Contents

Addressable Fire Alarm Control Panel 01 - 02

Conventional Fire Alarm Control Panel 03 - 04

Fire Alarm System (Fire Alarm P.B.L Combination Series) 05

Fire Alarm System (Fire Alarm Accesories) 06

Fire Alarm System (I/O Modules) 07 - 08

Fire Alarm System (Rate of Rise Heat Detector) 09

Fire Alarm System (Fixed Temperature Heat Detector) 10

Fire Alarm System (Photoelectric Type Smoke Detector HS-WT3OL) 11

HOOSEKI I
 Addressable Fire Alarm Control Panel

HOOSEKI Fire Alarm

Control Panel
Features

• English LCD Screen (240 x 128 or 240 character).

• LCD backlight energy-saving protection function.
• Two-wire circuits for supper long transmission distance
(up to 1,5 km between the control panel and modules).
• The data memory device can store up to 2000 historical records permanently
(the device in graphic system can be expandable up to 20 million records).
• Composed voice alarm function (broadcost) in human voice to operators).
• Voice guidance function (while operating)
• Abnormal temperature protection function (I/O modules over loading).
• 5LCs, IDCs are equipped with insulation for false inspection function.
• Protection against lightning surge. HOOSEKI Fire Alarm
• I/O modules miswiring protection to accessories are available. Annunciator
• I/O modules are equipped with segment isolation function.
• A table to review all I/O modules statuses is available for casier operation.
• Addresses and interlocks can be display on the LCD screen.
• Weekly automatic check function.
• Repeat alarm function.
• Two stage alarm delay function
• Standby battery with power saving function
• Build in-printer

Dimensions (Steel) *Size mark in red represent with printer option.

Cabinet Wall-mount

Addressas
255/1L 510/2L 765/3L 1020/4L 1275/5L 1530/6L 1785/7L 2040/8L
/loops

H(mm) 450 500 840 1020

W(mm) 480 480 480 480

D(mm) 130(*160) 160 180 180

01. HOOSEKI
Addressable Fire Alarm Control Panel

HOOSEKI Fire Alarm HOOSEKI Fire Alarm

Control Panel Annunciator

Specifications

Item Specifications
Model HS-ADD-P1/8L(1 Loop/8 Loop), HS-ADD-AN 1/8 ( 1 Loop/8 Loop)
Power Source 1 1OV AC 50/60 Hz or 220V AC 50/60 Hz
Addresses / Loops 255/ 1L 510/2L 765/3L 1020/4L 1275/5L 1530/6L 1785/7L 2040/8L
Standby Battery 24V DC
Transmission Distance Two-wires (able for branch wiring l,5km)
Annunciator Connection Use RS-485 for 800m, Network Signal Transceiver for 3km and Optical Fiber
for up to 40km
Loop Voltage Load Power / Indicating Lamp / Zone Telephone : 24V DC
SLC power source: 32V AC
Power Consumption Main control panel (monitoring} :500mA
Communication module for each system (monitoring) : 280 mA
Transmission Method Selective and sequential (I/0 modules)
Broadcast Output Relay output :interlock relay board x 13 sets for a max of 2,000 contacts
Method (relay board = 40 contacts [standard], 160 contacts [expansion])
Main Audio Voice notifications, human voice or voice alarm (over 90 dB)
Ambient Temperature 0~40°C
Cabinet Material Powder coating steel (optional Flame retardant ABS enclosure available
up to 255/1L only)

HOOSEKI 02.
Conventional Fire Alarm Control Panel

HOOSEKI Fire Alarm

Features Control Panel
Two-Stage alarm delay function :
At the first stage, when the detector sends the signal for the first
time, the control panel will automatically reset the signal and
enter the second stage for standby after 8 seconds.
At the second stage , it there is another signal sent by the
detectors within 9-40 seconds, the control panel will triggered
the fire alarm, else reset the alarm signal. This will prevent the
control panel from sending false alarms.
Standby battery protection :
During power-cut, when the standby battery is under DC 18V it
will automatically stop discharging to extend battery life.
Protection against lighting surge :
Power supply module with protection against lightning surge to
ovoid device damage caused by high voltage or power surge.
Quality control :
All interior components of the display module and base boards
in the unit are approved by CE and CNS. All products have to
pass strict inspection before delivery to ensure durability.

Abnormal voltage Inspection :

With abnormal voltage display Function, the system can indicate Exterior design :
high and low voltage. Equipped with zone display panel board. The panel (made of
Modular design : flame retardant plastic) adopt a streamline design for clear
The system has modular design with inputs/ outputs independent indication of zone's name, floor, building, properties, etc.
terminal module. If there is a problem on site, users do Other Functions:
not have to remove external wires and can easly replace Can be integrated with the Voice Evacuation System and the
defective boards improving the efficiency of maintenance and Emergency Telephone System in one cabinet for more
inspection. appealing look and less space consuming.

Cabinet Wall-mount

Number
5-10L 15L 20L 25-30L 35-40L 45-50L 55-60L 65-70L 75-80L 85-90L 95-100L 105-110 115-120L
of Loops

H(mm) 400 495 580 520 580 700 760 840 930 1020 1110 1195 1350

W(mm) 300 300 300 480 480 480 480 480 480 580 580 580 580

D(mm) 120 120 120 180 180 180 180 200 180 200 180 200 200

03. HOOSEKI
Conventional Fire Alarm Control Panel

Interlock
Cabinet Floor-standing 2-in-1 3-in-1 4-in-1
Control Panel

Number
125-130L 135-150L 155-170L 135-260L 265-300L 305-340L 345-450L 455-600L 1L 1L
of Loops

H(mm) 1600 1800 2000 1600 1800 2000 1800 1800 180 250

W(mm) 580 580 580 1160 1160 1160 1740 2320 180 210

D(mm) 260/360 260/360 260/360 260/360 260/360 260/360 260/360 260/360 75 90

HOOSEKI Fire Alarm Item Specifications

Annunciator
Model HS-5L. 10L, 15L, 20L, HS-25L,
30L. 40L. 50L (5 Zone - 50 Zone)
AN-5L, 10L, 15L, 20L, 25L,
30L, 40L, 50L (5 Zone - 50 Zone)
Power Source 110V AC 50/60 Hz or 220V AC 50/60 Hz
Standby Battery 24V DC
Charging Voltage Below 26V DC 450mA, trickle charging
Circuit Voltage 24V DC operation voltage,
under 10-11V DC 32mA
Rated Impedance Under 50, Ground Resistance above 2M
Detector Connection No limitation for Conventional Rate of
Rise Heat Detectors / Fixed Temperature Heat
Detectors : Up to 15 Photoelectric
Smoke Detectors (24V DC 40 A) per zone
E.O.L Resistor I0K Ω
No. of Indicators 1.2 times of the number of zone
(LED indicating lamp)
No. of Bells 1.2 times of the number of zone
Color Green/ Red / Black
Buttons Rocker Switch / Push-button / Capacitive Touch Switch
Cabinet Material Powder coating steel (optional flame
retardant ABS enclosure available up to 20L only
Mono tone sounder (above 85dB for 1m distance)
Main Audio 2 sets of No-Voltage NO contact,
Alarm Relay Contact capacity AC 250V / 7A

HOOSEKI 04.
Fire Alarm System
Fire Alarm P.B.L Combination Series

HS-FP1 Manual Call Point

Description

This Fire Manual Station con quickly transmit a signal to the fire receiver terminals or the
repeaters while the button under a transparent protective cover has been pushed at the
first finding of a fire accident. (This signal is beyond the accumulated time limitation).
There is a light over the button. The light will light up as a signal has been exactly received
by the receiver terminal. There is also a telephone jock for telephone communication with
attendant at the fire receiver terminal.

Specifications Advantages
Option Base
Model No. HS-FPI 1. Auto-Return by pushing button, no need to disassemble
Material Fire-Proof
Voltage Range 24V DC the main body.
plastics
Alarm Current 30 mA 2. Response light available to identify the operation completed.
Dimensions O 140 (mm)
Contact Rating 24V DC 100mA 3. Reinforced transparent protective cover is reusable.
Weight 150g
Sub-Function Phone jack: 4. All plastics are fire-proof, light, convenient and stylish.
Color Red
Confirmation LED; 5. Outside cord distribution with terminators to ease on work.
Reset button

HS-FL3 Indicator Lamp LED Specifications

Description Model No. HS-FL3
Power Source 24V DC
The Fire Indicating lamp is an equipment to go twinkling,
Alarm Current 12 mA
to show the position of a fire signal device and to be
Ambient Temp. -10°C~+55°C
controlled by fire receiver terminal or a repeater while a
Material Fire-Proof plastics
fire accident accured.
Weight 52g
Dimensions O 92x 58 (H) mm
Color Red
Specifications
Model No. HS-FB6
Advantages
Power Source 24V DC
Alarm Current 35mA 1. The way of motor-driven is taken of the
low consumption of current, to reduce
Movement Motor
HS-FB6 Alarm Bell FB6 24V the load for power output from receiver
Material 3.0 Alloy Alu
terminal.
Dimensions O 6” (150mm) Description 2. This design of exceptional structure is
Weight 418g sturdy and durable. The bell even can
The fire alarm bell is an equipment controlled by
Sound Output 90 dB/ M and above ring to last 40 hours without decline of
the fire receiver terminal or the repeater and
Color Red the performance and structure.
sounds a warning as a fire accident occured.

05. HOOSEKI
Fire Alarm System
Fire Alarm Accesories

Telephone HS-PBL Fire Alarm

Handset Combination

Material ABS Plastic Description

Purpose Equipped in Fire Hose, insert to
• Material Plate MS Tebal 1.2 mm
manual call point plug for
• Engsel SH-006
communicating with
• Mata ayam
fire alarm control panel
• Knob pintu
Dimension 212 (H) x 63 (W) x 50 (D) mm

BOX Main
Distribution Frame

Material Plate MS tebal 1.2 mm

Engsel SH-006
Kunci Hubben
50 pairs : 50 x 40 x 13 cm

BOX TB (Terminal Box)

12 pairs, 24 pairs

Material Plate MS lebal 1.2 mm

Engsel SH-006
Kunci Hubben
12 pairs : 30 x 20 x 8 cm
24 pairs : 30 x 25 x 8 cm

BOX TB 12 pairs BOX TB 24 pairs

HOOSEKI 06.
Fire Alarm System
I/O Modules

HS-ADD-BD
Base Detectors Addressable
(Only for full Addressable System)

Suitable for Model:

- ROR (HS-WS19L)
- Fixed (HS-WK100L)
- Smoke (HS-WT30L)

Specifications

Function Circuit Input Operating Voltage DC16~30V

EOL Resistor Below 10Ω /master line Material Fire-proof plastic
Ambient Temperature -10°C~50°C Relative Humidity below 95% Dimension 108 x 22.6 mm
Monitored Current 420µA/DC24V Note Addressable profesional EOL resistor

Functions

• Status indicators for Monitoring, Active, Error and Isolating. • Self-test functions for circuit disconnection and activation
• Address coding by binary coded dip switch for easier setting • Expandable to connect with photoelectric smoke, rate of rise heat
• Two-wires multi-transmission detector and fixed temperature heat detector, and no need for external
• Stable communication with rejection to noise and disturbances power supply

Wiring Notes
• Addressable Detector Base's L+ LC connect to Convensional • Provided current is not over 1.3mA/DC24V
Detectors' L+ LC, polarized • A Profesional terminal device is needed, cannot use a normal 10KΩ

07. HOOSEKI
Fire Alarm System
I/O Modules

HS-ADD-I/O-1
Control Modules 1 In 1 Out
(with isolation function) Communication isolation function,
when short circuit occurred in the module, the module will
be automatically isolated from the main communication line.

Specifications
SPECIFICATIONS
• EOL : Below ICON capacitor / address.
• EOL
Operating
: BelowEnvironment : 0°C-/ 50°C
10K Ω capacitor relative humidity below 85%
address. • Rated Voltage : 33V AC
MonitoringEnvironment
Current : 3.2: mA • Rated Voltage : 33V AC
• Operating °0 C- °50 C relative humidity below 85% • Output Contact Capacity : 30V DC / 2A (max)
Activating Current • Output Contact Capacity : 30V DC / 2A (YRR-3LO & YRR-4LO)
• Monitoring Current: :48mA
420 A • Material : Flame retardant plastic
64mA (YRR-4L & YRR-4LO) • Material : Flame retardant plastic
• Activating Current : 16mA • Dimensions : 80 (H) x 60 (W) x 30 (D) mm
• Load Voltage Input : 24V DC (YRR-3LO & YRR-4LO) • Dimensions : 87 (H) x 93.5 (W) x 43 (D) mm
• Note : EOL capacitor
• Note : EOL capacitor

HS-ADD-I/O-4
Control Modules 4 In 4 Out

Specifications
• EOL : Below 10K Ω capacitor / address.
• Operating Environment : 0°C- 50°C relative humidity below 85%
• Monitoring Current : 3.2 mA
• Activating Current : 48mA • Output Contact Capacity : 30V DC / 2A
• Activating Current : 64mA • Material : Flame retardant plastic
• Load Voltage Input : 24V DC • Dimensions : 87 (H) x 93.5 (W) x 43 (D) mm
• Rated Voltage : 33V AC • Note : EOL capacitor

Control Modules 1 In 1 Out, 4 In 4 Out Features

• Built-in tri-state LED indicator to indicate different statuses, • Expandable to connect with photoelectric smoke, rate of
"Monitoring", "Disconnection", and "Fire State". rise heat and fixed temperature heat detector
• Binary coded address dip switch • LED indication pattern, as follows :
• Two-wire multi-transmission monitoring (flash at intervals of 2.5s), disconnection (flash at
• Stable communication with resistance to noise and disturbances intervals 0.5s) and fire state (on)
• Self-test function for circuit disconnection and activation • Can be fixed on alumunium railings for easy installment

HOOSEKI 08.
Fire Alarm System
Rate of Rise Heat Detector

HS-WS19L ISO 9001 certificated CE

Description

The rate-of-rise heat detector, HS-WS19L, is designed to sense the rapid When a slower temperature change occurs, the expanded
or abnormal rise in temperature of air. If ambient temperature rises air escapes through a bleeding hole to keep the pressure
rapidly, the air in chamber expands and presses the diaphram to close balanced so that the fault alarm never occurs.
the contact point to give advanced warning.

Advantages

• Rate-of-rise heat detector detects intense fires by quickly • Red indication lamp lights when detector is activated.
responding to rapid temperature increases. • High-temperature-enduring plastics and fire-proof material
• Mechanical operating principles ensure the long-term durability are used to build up the main body of the detector.
and the least malfunction. • The base is in common with other detectors made in this
• Self-restoring ensures those elements repeated use. company for the facilitation of installation.
• High quality components are fitted for greater reliability. • Connections are non-polarized to avoid wiring mistakes.

Specifications

Model HS-WS19L Ambient Temp. -10°C~+55°C

Type 2 wire Ambient Humidity 0~95%
Voltage Range 12~30V DC Material Fire-proof Plastics
Alarm Current 24V DC 30mA Dimensions 102 (Dia.) x 42 (H) mm
Contact Rating N/A Weight 130g
Polarization Non-polarized Color White
Alarm Temp. Comply to EN54, CNS

09. HOOSEKI
Fire Alarm System
Fixed Temperature Heat Detector

HS-WK100L Description

ISO 9001 certificated CE The detector, HS-WKIOOL incorportes a self-resetting bimetallic disk
element with response indicator. It activates whenever the ambient air
temperature reaches the top temperature detector setting.

Advantages

• Stabilized performance, long-term durability and least- • Red indication lamp lights when detector is activated.
malfunction are ensured by employing a bimetal mechanism. • High-temperature-enduring plastics are used to build up the
• Self-restoring ensures the elements repeated use. main body which is also nicely shaped.
• The sensitive part is enclosed to prevent from being • The base is in common with other detectors made in this
moistened and contaminated. company for the facilitation of installation.
• Pure silver contacts ensure the quick response. • Connections are non-polarized to avoid wiring mistakes.

Specifications

Main Model HS-WK100L Alarm Temperature Comply to EN54, CNS

Type 2 wire Ambient Temperature -10°C~+55°C
Voltage Range 12~30V DC Ambient Humidity 0~95%
Alarm Current 24V DC 30mA Material Fire-Proof plastics
Polarization Non-polarized Dimensions 101 (Dia.) x 47 (H)mm
Fixed Temperature 60°C, 70°C, 80°C. Weight 100g.
Color white
Sensitivity :
When exposed within an air stream 1 m/sec., 125% higher than its
operating temperature, and at 20°C of ambient temperature, the detector
will sound an alarm within 90 seconds.

HOOSEKI 10.
Fire Alarm System
Photoelectric Type Smoke Detector HS-WT3OL

HS-WT30L
Specifications

Main Model : HS-WT3OL

• Series Model : HS-WVT3OL1 . HS-WT3OL3
• Rated Voltage : 24V DC
• Working Voltage : 1 2V to 30V DC
Standby Current : 60 micro amps. (max)
Alarm Current : 100mili amps. (max)
• Initial Stabilizing Time : 1 5sec
Identification Light : Red Color (LED)
Ambient Temperature : -10 C~+50 C
• Ambient Humidity : 0~95%
Body Case : Fire-Proof Plastic
Weight : Approx. 140g
Color : Creamy-white
• Used Conventional

Description
This is an advance scientific device. It is very quick and
The photoelectric type smoke detector is based on the photoelectric
accurate to activate the early fire warning system.
sensing principle to make up. When fire break out and smoke enters the
Because of the pretty and compact styling, it is most
light- tight box, the particles of smoke scatter the infrared light, and
suitable for the interior decoration of the modern
this scattered light goes into the receiving element, thereby emitting
buildings.
an electric current, and while the electric current is up to the fixed
extend, the fire alarm will be activated.

ISO 9001. CE Approved

11. HOOSEKI
ISO 9001, APPROVED