PID330 Temperature Controller-PID

Features :
! 4 + 4 Digits, 7 Segment LED Dual Display
! LED Status Indicator : Relay ON, Tune, Alarm, Manual
! Universal Input
! ON-OFF / PID Control
o
! C / oF Selectable
! Heat Cool PID
! Ramp Soak
! Soft Start

96 x 96mm Certifications :

Display Specifications Functional Specifications

Display 4+4 Digits, 7 Segment LED Dual Display Control Action 1) PID 2) ON - OFF
Height of Upper Display : 14mm Proportional Band (P) 0.0 to 400.0o
Height of Lower Display : 7mm
Integral Time (I) 0 to 3600 sec
LED Indications 1 : Main output, 2, 3 : Alarm output,
M : Manual output, T : Tune. Derivative Time (D) 0 to 200 sec
Cycle Time 0.1 to 100.0 sec
Hysteresis Width 0.1 to 99.9o
Input Specifications
Manual Reset Value -99.9 to 99.9o
Inputs Thermocouple (J, K, T, R, S, C, E, B, N, L, U, W, Heat Cool PID
Platinel II), RTD (PT100)
signal inputs (-5 to 56mV, 0 to 10V, 0 to 20mA) Control Action PID

Resolution o
1 / 0.1 for TC / RTD only Cycle Time 0.1 to 100 sec
(Fixed 1° resolution for R & S type TC) Proportional Gain 0.0 to 400.0o
Decimal point position selectable : Deadband Programmable from setpoint low limit to
1 / 0.1 / 0.01 / 0.001 for analog input setpoint high limit
Indication Accuracy For TC inputs : 0.25% of F.S. ±1o Alarms
For R & S type TC inputs : 0.5% of F.S. ±2o
(20 min of warm up time for TC input) Modes Deviation high / low, Absolute high / low, Band,
For RTD input : 0.1% of F.S. ±1o sensor Break, Full scale high, Full scale low
For Analog input : ±0.5%, ±1 digit Hysteresis 0.1 to 99.9o
(F.S. = Full Scale) Ramp Soak
o
Temperature Unit C / oF Selectable Ramp Rate 1 to 9999o / hr
Input Filter (FTC) 1 to 99 sec Soak Time 0 to 1440 min
Sampling time 200 ms Soft Start Time 0 to 999 min

Output Specifications
Auxiliary Supply Specifications
Control Output (Optional) 1 Supply Voltage 90 to 270V AC / DC (50 / 60Hz)
Relay Contact (SPST) 5A @ 230V AC / 30V DC, resistive Power Consumption 5 VA max @230V AC
SSR Drive (Voltage Pulse) 12V DC, 20mA
Current 4 to 20mA DC (loop impedance : 500Ω max)
Environmental Specifications
Auxiliary Output (Optional) 2
Relay Contact (SPST) 5A @ 230V AC / 30V DC, resistive Temperature Operating : 0 to 50oC (32 to 122oF)
Storage : -20 to 75oC (-4 to 167oF)
SSR Drive 12V DC, 20mA
Humidity (non-condensing) 85% RH
Retransmission
Current 4 to 20mA DC
(loop impedance : 500Ω max) Mechanical Specifications
Update Rate 100 msec
Mounting Panel
Weight 295 gms

www.selec.com 1
 PID330 Temperature Controller-PID
Dimensions
Ordering Information
SUPPLY
Panel Cutout PRODUCT CODE OUTPUT 1 OUTPUT 2 OUTPUT 3 COMMUNICATION CERTIFICATION
VOLTAGE
PID330-2-0-04 4 - 20mA RELAY RELAY YES 90-270V AC / DC

PID330-0-0-01 RELAY RELAY RELAY — 90-270V AC / DC

Mounting Accessories

Clamp side with screw assembled

Terminal Connections Mounting Accessories (Supplied with units)

For TC544 : 48 X 48 Collar clamp ACL4802

Input Sensor Ranges (For TC / RTD Inputs)

Resolution Ranges
Sensor type 1 0.1
o
C -150 to 850 -150 to 850
PT100
Cable Size (mm2): 1.5-2.5 ; Stud Hole for Lug (mm): 3.5 ; Tightening Torque (N-m): 0.8 o
F -238 to 1562 -199 to 999
o
C -199 to 750 -199 to 750
J
o
F -328 to 1382 -199 to 999
o
C -199 to 1350 -199 to 999
K
o
F -328 to 2462 -199 to 999
o
C -199 to 400 -199 to 400
T
o
F -328 to 750 -199 to 750
o
C 0 to 1750 N/A
R&S
o
F 32 to 3182 N/A

www.selec.com 2