KUBOTA MINI-EXCAVATOR

Reaching a higher level of performance is easy

when you’ve got the most digging power in
your class. The Kubota KX71-3 mini-excavator.
Operate the KX71-3 mini-excavator’s control levers. And you’ve got the most efficient,
on-the-job performance within your hands. That’s because the KX71-3 delivers the
largest digging depth and reach of all mini-excavators with a long arm in its weight
category. Even with the long arm, it amazingly generates the largest power in its class
for both arm and bucket digging. Furthermore, the KX71-3’s lifting power is so strong.
Together with a host of robust features that complete the package, making the KX71-3
the stand-alone leader in performance.

Protected bucket cylinder hoses

To extend service life and improve
visibility, the bucket cylinder hoses are
well protected having been routed
Digging arm and bucket through the arm.
With the ability to deliver the most digging
power, plus the efficiency of a long arm, the
KX71-3 produces the largest digging depth of all
long-arm mini-excavators*. Even with its long
arm specification, the KX71-3 amazingly
generates the biggest force for both arm and
bucket digging*. Moreover, it has the ability to
perform a wide range of tasks. (* In its class.)
Boom cylinder protector Well protected front attachment hoses
Thanks to a V-shaped thick plate, To prevent accidental damage of the
the boom cylinder is protected from front hoses, they are routed through the
unexpected damage caused by the swing bracket. Also, a metal cover plate
breaker or other attachments, rocks, located at the back of the boom protects
being loaded onto a truck, etc. the operator subject to a hose burst.

Variable displacement pump

For efficient operation, both the oil flow
and pressure are adjusted according
to the workload by the variable
displacement pumps. By utilizing
variable pumps a more efficient engine
is selected. This gives fuel efficiency,
low vibration and noise level.

Dozer cylinder hoses

Utilising a more efficient two-
piece design, the KX71-3’s
dozer cylinder hoses can be
Swing bracket bushes quickly replaced on the spot.
To enhance durability, we’ve
adopted bushes at all fixing /
pivot points.
Upgraded features to keep your performance up
while keeping downtime down.

Deluxe cabin Increased rear visibility Low noise level

To keep you operating longer, our The KX71-3 has a 28 % reduiced When designing the KX71-3,
larger cabin delivers maximum overhang while maintaining the we kept a focus on being
comfort. It provides more legroom, same level of stability as our environmentally and operator
an adjustable suspension seat, a conventional model. Now, KX71-3 friendly. Thus, the KX71-3’s
radio installation kit, plus excellent offers increased rear visibility and noise level in the cabin is an
visibility. Both cabin and canopy easier operation in confined areas. amazingly low 79 dB.
offer the security of ROPS/FOPS.

Double-opening bonnet
Both daily maintenance and repairs
will become fast and easy with the
double-opening bonnet. When both
panels are opened, virtually all
components are within quick reach.

Kubota V1505-EBH engine Safety lock system

The powerful and reliable Kubota To prevent unexpected machine
V1505-EBH engine provides movement, the safety lever must
economical and environmentally be raised to lock out the travel
clean power. The engine is so levers and pilot controls before
fuel efficient, a full tank gives 10 the engine will start.
hours of continuous work.
 Kubota Intelligent Control System
An innovative upgrade that always keeps
you in tune with the KX71-3’s vital signs.
The Kubota Intelligent Control System is
equipped with warning indicators for
engine, fuel, temperature, and oil; a service
mode that enables accurate
troubleshooting; and standard indicators
which display current working conditions
such as engine rpm, hour meter, and more.

Language selection display Information when service time comes Low fuel display

2-speed travel switch

With the 2-speed travel switch re-located
from the floor to the dozer lever, you’ll
enjoy enhanced dozer operation whenever
changing travel speeds.

Wrist rest
With this new feature, to assist with smooth
operation and create less operator fatigue,
wrist rests are fitted as standard. Slight
adjustments are easy to make, plus
operation is smooth and less fatiguing.

Boom swing / Auxiliary operation

For easier operation, the boom swing
pedal and auxiliary hydraulic operations
are controled by independent pedals—with
one pedal located on the right side of the
floor and the other on the left side.
Standard Equipment

Engine/Fuel system Undercarriage Safety system

• Double element air cleaner • 300 mm rubber track • Engine start safety system on the
• Electric fuel pump • 1 x upper track roller left console
• 3 x outer flange type lower track • Travel lock system on the left
Cabin roller console
• 2 speed travel switch on dozer • Swivel lock system
• ROPS (Roll-Over Protective lever • Boom anti-fall circuit in the
Structure, ISO 3471) control valve
• FOPS (Falling Objects Protective Canopy
Structure) level 1 Working equipment
• Weight-adjustable full suspension • ROPS (Roll-Over Protective
seat Structure, ISO 3471) • 1150 mm arm
• Seatbelt • FOPS (Falling Objects Protective • Auxiliary hydraulic circuit piping
• Hydraulic pilot control levers with Structure) level 1 to the arm end
wrist rests • Weight-adjustable full suspension • 2 working lights on cabin and 1
• Travel levers with foot pedals seat light on the boom
• Cabin heater for defrosting & • Seatbelt
demisting • Hydraulic pilot control levers with
• Emergency exit hammer wrist rests
• Front window power-assisted by 2 • Travel levers with foot pedals
gas dampers
• 12 V power source for radio-stereo Hydraulic system Optional Equipment
• Location for 2 speakers and radio
antenna • Pressure accumulator
• Hydraulic pressure checking ports Working equipment
• Straight travel circuit
• Third line hydraulic return • 1350 mm arm (long arm)

Undercarriage
• 300 mm steel track
(+ 95 kg)

Cabin
• Radio/stereo installation kit

Safety system
• Warning buzzer
• Anti-theft device
SPECIFICATIONS WORKING RANGE
*Rubber shoe type

Cabin (Std. arm/Long arm) kg 2790/2800

Machine weight
Canopy (Std. arm/Long arm) kg 2685/2695
Bucket capacity, std. SAE/CECE m3 0.07
Bucket with side teeth mm 505
width without side teeth mm 480
Model V1505-E2-BH-10EU

590 600
Type Water-cooled, diesel engine

1360
1500
PS/rpm 27.5/2300

1500
Engine Output ISO9249
kW/rpm 20.5/2300
Number of cylinders 4
Bore x stroke mm 78 x 78.4
Displacement cc 1498
Overall length (Std. arm/Long arm) mm 4520/4550 1840 (1870) 1200
Cabin mm 2410
Overall height
Canopy mm 2430
Swivelling speed rpm 9.4

4470 (4600)
Rubber shoe width mm 300
mm
3170 (3300)
Tumbler distance 1560
Dozer size (width x height) mm 1500 x 300
P1,P2 Variable displacement pump

2410
Flow rate /min 32.2+32.2

Hydraulic Hydraulic pressure MPa(kgf/cm2) 23.5 (240)

pumps P3 Gear pump

350 370
Flow rate /min 18.4
Hydraulic pressure MPa(kgf/cm2) 20.6 (210) 1560
Arm (Std. /Long) kN (kgf) 17.5/16.2 (1790/1650) 1990
2260 (2460)

Max. digging force

1360
2680 (2870)

Bucket kN (kgf) 25.2 (2570)

Boom swing angle (left/right) deg 80/60 3320 (3350)
Flow rate /min 50.6
Auxiliary circuit
Hydraulic pressure MPa(kgf/cm2) 20.6 (210)
Hydraulic reservoir 34
Fuel tank capacity 45

Max. travelling Low km/h 2.7 4580 (4770)

speed High km/h 4.6
4700 (4890)
Cabin kPa(kgf/cm2) 26.5 (0.270)
Ground contact pressure
Canopy kPa(kgf/cm2) 25.0 (0.255)
( ): Long Arm
Ground clearance mm 305
Unit: mm

LIFTING CAPACITY
With Cabin, Rubber shoe, Standard Arm Unit : kN (ton)
Lifting point radius (2.5m) Lifting point radius (max.)
Lift Point Over-front Over-front
Height Over-side Over-side Lift Point Radius
Blade Down Blade UP Blade Down Blade UP
2.0m 5.4(0.55) 5.4(0.55) 5.4(0.55) - - - Lift Point
1.5m 6.7(0.68) 6.7(0.68) 6.1(0.62) - - -
1.0m 7.9(0.81) 6.9(0.70) 5.9(0.60) 4.5(0.46) 3.4(0.35) 3.0(0.31)
0m 8.8(0.90) 6.7(0.68) 5.7(0.58) - - -
With Cabin, Rubber shoe, Long Arm Unit : kN (ton)
Lift Point Height
Lifting point radius (2.5m) Lifting point radius (max.)
Lift Point
Over-front Over-front
Height Over-side Over-side
Blade Down Blade UP Blade Down Blade UP
2.0m 4.8(0.49) 4.8(0.49) 4.8(0.49) - - -
Axis of Rotation
1.5m 6.1(0.62) 6.1(0.62) 6.1(0.62) - - -
1.0m 7.4(0.75) 6.9(0.70) 5.9(0.60) 4.1(0.42) 3.3(0.33) 2.9(0.29)
0m 8.7(0.89) 6.6(0.67) 5.6(0.57) - - -

Please note:
* The lifting capacities are based on ISO 10567 and do not exceed 75 % of the static tilt load of the machine or 87 %
of the hydraulic lifting capacity of the machine.
* The excavator bucket, hook, sling and other lifting accessories are not included on this table.
* Working ranges are with Kubota standard bucket, without quick coupler.
*Specifications are subject to change without notice for purpose of improvement.
KUBOTA EUROPE S.A.S.
19 à 25, Rue Jules Vercruysse -
Zone Industrielle - B.P. 50088

95101 Argenteuil Cedex France

Téléphone : (33) 01 34 26 34 34

Télécopieur : (33) 01 34 26 34 99
http://www.kubota-global.net :36