FAQ List for

VWGRCLite and VWGRCLite Applications

Subject focal points:

Information source for VOLKSWAGEN Development Partner

Order/Changes

VALIDAT Basis/Professional

VX1/PX1

License Manager

Contact

GRC 7.1.x - What’s new

Known Problems

T-Systems International GmbH page 1 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
© Copyright T-Systems International GmbH 2020
All rights reserved.
Version 6.1 Released as on February 2020
Status: released

Reproduction of any kind, also in extracts, is not permitted without the approval
of T-Systems International GmbH

Created for:
T-Systems International GmbH
VWGRCLite-Service
Alessandro-Volta-Straße 11, 38440 Wolfsburg
+49 375 606199-19 (Tel.)
+49 391 580248942 (Fax)
E-Mail: [email protected]

Autors:
Annette Lüer, T-Systems International GmbH
Sabine Itani, T-Systems International GmbH
Thomas Hallmann, T-Systems International GmbH

The information in this document is published without regard for a possible patent protection. Product
names are used without regard for free usability. Many hardware and software names are concurrently
registered trademarks or should be regarded as such.

T-Systems International GmbH page 2 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
Change history
Version Status Editor Modifications / Comments

5.0 12.2013 Lüer New Document because cessation of VW partner package

and release of GRC450
5.1 03.2014 Lüer 2.2.3: Tab substituted by link; 2.2.2 and 12.1 expanded; 3.8
and 5.1 edited; 12.3 and 14.2.3 inserted, resp. new
5.2 10.2014 Lüer 2.3: corrected Link, 4.2: added VEM and VarTool, 10: new
phone, 3.5.3 and 3.5.4: DSLS replaced LUM
5.3 12.2014 Lüer Changes acc. GRC5.3: 3.5, 5, 8, 9,12, 13 and 14
Canceled: 5.2.3, 7.1, 8.1, 8.2, 9.1, 9.2
5.4 12.2015 Lüer Changes acc. GRC5.4: 2.2.1, 2.2.2, 3.3, 3.5.1, 3.6, 4.2, 5 all
chapt., 6,7, 8, 10.2, 12, 12.2 and 14 all chapt.
Inserted: 12.1, 12.2
Removed old 12.2
5.5 11.2016 Lüer Adjusted: 2.2.1, 2.2.2, 3.2, 3.3, 5.1, 7, 10.3 (bevor 10.2), 12,
12.1, 14, 14.1, 14.2.2, 14.2.4.2, 14.2.4.3, 14.2.5
Inserted: 4.3.12, 4.3.13, 10.2, 14.1.7
5.6 12.2017 Lüer Changes Acc. GRC6.2; Hyperlinks ServiceNet new;
Removed chapter 8 (CATIA V4)
5.7 06.2018 Lüer Changes Acc. GRC6.2.8
5.8 07.2018 Hallmann Removed: 11.3 Partner package process
5.9 12.2018 Lüer Changes acc. 6.2.10: 5.1; 2.2.1, 11
Update: 2.2.1, 2.3, 3.5.3, 3.7, 4, 8, 9,10.1, 13 (13.1.1-13.1.7
and 13.2.1-13.2.6 removed)
New: 12.4 , 4.3.14
6.0 11.2019 Lüer Changes acc. VWGRCLite7.1.x and CATIA Additional
Application replaced by VWGRCLite Application.
Update: 3.4 (plus physical), 3.6, 4.2 (Parafix erased), 5, 5.2.3,
5.2.4 (Validat Vers), 7, 9, 9.1.-9.2, 11
Remove: 4.3.14 (Parafix),
New: 5.2.1 (inserted enhanced handling result)
6.1 02.2020 Lüer 7: Windows 7 no longer released oslevel, little
corrections/rephrasing and Application instead of Additional
Applacation at whole document, 4.3.1 u 5.3: insert
exact/simplified link analysis, 4.3.8: CREO instead of PRO/E,
5.2: added decision additional benefit VAL Prof, 11.1:
update NEWS- Webinstaller

T-Systems International GmbH page 3 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 Version Status Editor Modifications / Comments

T-Systems International GmbH page 4 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
Table of Content

1.1 Audience .............................................................................................................................................................................8

1.2 Note for the FAQ list .........................................................................................................................................................8

1.3 Agreements/Abbreviation for this document ...........................................................................................................8

2 Important information sources......................................................................................................................................9

2.1 ONE.Konzern Business Plattform / VWGroupSupply............................................................................................ 9

2.2 T-Systems ServiceNet ................................................................................................................................................... 10

2.2.1 Website ServiceNet “VOLKSWAGEN GROUP” .................................................................................................... 11

2.2.2 ServiceNet account - Registration and “Forgot your password?” ................................................................... 12

2.2.3 ServiceNet - Short links ................................................................................................................................................ 12

2.3 Special supply “OEM Startpart” ................................................................................................................................ 13

3 VWGRCLite applications / VX1 licenses: Order, delivery, changes ............................................................... 14

3.1 T-Systems order process ............................................................................................................................................. 14

3.2 Support Package ........................................................................................................................................................... 14

3.3 Premium Contract Support ......................................................................................................................................... 15

3.4 License type – Nodelocked / Floating / Site / Corporate ................................................................................. 15

3.5 Technical specifications for license order / license ............................................................................................ 16

3.5.1 Technical specifications for VWGRCLite and VWGRCLite Application licenses ....................................... 16

3.5.2 Technical specifications for a license change of the VWGRCLite and/or the VWGRCLite Application
16

3.5.3 Technical specifications for VX1 licenses – DSLS (Dassault Systèmes License Server) ........................ 16

3.5.4 Technical specifications for a VX1 license change ............................................................................................. 17

3.6 License Switch (VWGRCLite, VWGRCLite Application and VX1) ................................................................... 17

3.7 Purchasing of PX1 and VX1 License ....................................................................................................................... 18

3.7.1 Process of the VX1 order: ............................................................................................................................................ 18

3.8 VWGRCLite – Enhancement of license feature.................................................................................................... 18

4 Licensed VWGRCLite Applications.......................................................................................................................... 19

4.1 License-Bundle............................................................................................................................................................... 19
T-Systems International GmbH page 5 of 39
FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 4.1.1 Standard package ......................................................................................................................................................... 19

4.1.2 Engineering package ................................................................................................................................................... 20

4.2 Licensed VWGRCLite Single applications ............................................................................................................. 20

4.3 Short descriptions VWGRCLite Applications ........................................................................................................ 21

4.3.1 VALIDAT ........................................................................................................................................................................... 21

4.3.2 KVS PlugIn ....................................................................................................................................................................... 21

4.3.3 NTool ................................................................................................................................................................................. 21

4.3.4 Netline V5 ......................................................................................................................................................................... 22

4.3.5 OutGen.............................................................................................................................................................................. 22

4.3.6 RPS .................................................................................................................................................................................... 22

4.3.7 LTA ..................................................................................................................................................................................... 22

4.3.8 DoLittle V5........................................................................................................................................................................ 22

4.3.9 BoM2KSL ......................................................................................................................................................................... 23

4.3.10 VWMetho .......................................................................................................................................................................... 23

4.3.11 CADGlyph ........................................................................................................................................................................ 23

4.3.12 VWGVARTool.................................................................................................................................................................. 23

4.3.13 3DZP .................................................................................................................................................................................. 24

5 VALIDAT ........................................................................................................................................................................... 24

5.1 Difference VALIDAT Basis / VALIDAT Professional ............................................................................................ 25

5.2 Benefit of VALIDAT-Professional license ................................................................................................................ 26

5.2.1 Check Result - handling and information content of standard check window enlarged ......................... 26

5.2.2 Automated VALIDAT Check of CATIA Data........................................................................................................... 27

5.2.3 VALIDAT Professional License released automatically ..................................................................................... 27

5.2.4 VALIDAT CATDua - extra Clean Option .................................................................................................................. 28

5.3 VALIDAT structure analysis ........................................................................................................................................ 29

5.3.1 Historical background .................................................................................................................................................. 29

6 Benefit of VX1 / PX1 license....................................................................................................................................... 30

7 Release of operating system / CATIA V5-6 combinations ................................................................................ 30

T-Systems International GmbH page 6 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 8 License manager FlexNet ........................................................................................................................................... 31

9 Contacting the VWGRCLite Service Team – Service Desk............................................................................... 31

9.1 You direct an inquiry to CAx Service, by telephone or email ............................................................................ 31

9.2 Reporting errors/problems related to VWGRCLite ............................................................................................. 32

9.3 Procedure for lodging a request ............................................................................................................................... 32

10 Best Practice ................................................................................................................................................................... 33

10.1 One way to configure the KVSPlugin ....................................................................................................................... 33

11 GRC 7.1.x – What’s new .............................................................................................................................................. 34

11.1 NEWS - New DoLittle package 7.0.1.2.0 available - Sep 6, 2019 ................................................................... 34

11.2 NEWS - Important information about the VWGRCLite 7.1.5.1.0 patch - Aug 8, 2019 .............................. 35

12 Known Problems ............................................................................................................................................................ 36

12.1 File %TEMP%\.inst_grx.lock .................................................................................................................................... 36

12.2 Installation on existing VWGRCLite installation.................................................................................................... 36

13 VWGRCLite...................................................................................................................................................................... 37

13.1 VWGRCLite – requirements and prerequisites .................................................................................................... 38

13.2 VWGRCLite – Tips and Tricks ................................................................................................................................... 38

13.2.1 Service Net – Quicklinks Brands............................................................................................................................... 38

13.2.2 VWGRCLite – Support Mail ........................................................................................................................................ 39

13.2.2.1 VWGRCLite – Support Mail without Outlook installation .................................................................................. 39

T-Systems International GmbH page 7 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
1 Introduction
This FAQ list provides answers to the following topics. They are not available in the classic question/answer flow;
instead, the corresponding document of frequently asked question is given under a topic.

Topic focal points:

Important question sources
Licenses – Purchase order, Delivery, Change
VWGRCLite
VWGRCLite Applications
Differences VALIDAT Basis / VALIDAT Professional
VX1- / PX1
License manager
Contact

1.1 Audience
This document is directed to the Volkswagen development partners who are interested in the VWGRCLite and the
VWGRCLite applications.

1.2 Note for the FAQ list

This document does not demand for completeness and response to all the questions. Please contact us in case of
particular questions, suggestion or ambiguities.

1.3 Agreements/Abbreviation for this document

Abbreviation Meaning
FAQ Frequently Asked Questions
ServiceNet T-Systems ServiceNet
The Automotive/Manufacturing Competence Center
The “VW Group” enter page can be found at: https://vwgroup.t-systems.com
e.g. for topics like the VWGRCLite, license orders
VWGroupSupply VOLKSWAGEN Web Portal for Partner
Link: http://www.vwgroupsupply.com (Extra access required)
VW GRC Volkswagen Group Reference CATIA
VWGRCLite Volkswagen Group Reference CATIA Lite
Defines the CATIA environment at development partner side about
participating brands, departments and additional applications.

T-Systems International GmbH page 8 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
2 Important information sources
Where can I get information as a VOLKSWAGEN development partner?

With the VOLKSWAGEN contact person in each project

Partner Portal of the VOLKSWAGEN brands
Partner information presentations of the VOLKSWAGEN brands
T-Systems ServiceNet
Trainings

The VOLKSWAGEN contact person should also clarify the following well in advance along with the other topics.
E.g.:

▪ Access to the VW Group Supply

▪ Skill specification to the designer
▪ Necessary requirement of the VOLKSWAGEN additional applications
▪ VOLKSWAGEN norms/design standards as per which are used

Please note the announcements and proclamations in the partner portals of the VOLKSWAGEN brands and in
T-Systems ServiceNet. You can register there for newsletter to some extent.

It is also recommended to see the partner information presentations of the respective brands relevant to you.
Except the “first-hand information” you can also address the suggestions and questions directly on the partner
information presentations.

Software, documentation and a few Video documents provided for the VWGRCLite and partially for the VWGRCLite
applications. This should be provided to the user and read if necessary.

As the use of the VWGRCLite applications is not self-explanatory, it is recommended that the “new” users undergo
corresponding trainings (e.g. for: VOLKSWAGEN coaching, AUDI academy).

2.1 ONE.Konzern Business Plattform / VWGroupSupply

The deployment and support for the Volkswagen partner package and its application packages is stopped
with the release of the GRC 4.5.0. For this reason, the VOLKSWAGEN Partner Packages is no longer available
at the website “VWGroupSupply”. With release of the GRC 4.5.0 suppliers are obligated to work solely with the
VWGRCLite.

VOLKSWAGEN Web Portal for VOLKSWAGEN Partner

Link: http://www.vwgroupsupply.com

Please note in the VWGroupSupply the announcements/proclamations.

Access is required for the VWGroupSupply that should be assigned via VOLKSWAGEN.
After the successful login you can access the following link:

https://sso.volkswagen.de/fedl/en/FEDL.catia.html

T-Systems International GmbH page 9 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 This includes information about for CATIA at VOLKSWAGEN, for example Methodology-Guides for download.

2.2 T-Systems ServiceNet

What can I find in ServiceNet?

The T-Systems ServiceNet provides following:

▪ The currently released VWGRCLite and VWGRCLite applications Software/ Documentation

(application bundle/single applications) for downloading
▪ Information for ordering the VWGRCLite and VWGRCLite application licenses and VX1 licenses (e.g.
contract conditions, license model-dependent price information, order pages)
▪ Suitable license manager for the VWGRCLite and VWGRCLite applications
▪ Current VX1 software for download
▪ Additional information for the currently released VWGRCLite applications (e.g. current application
versions, integration guidelines)

Where can I get the VX1-Software?

The VX1-Software provides functionalities for the VWGRCLite applications in CATIA V5-6.
If the VX1-Software is not installed, some of the VWGRCLite applications do not run.

The VX1-Software can be downloaded at the following location: https://vwgroup.t-systems.com/vx1

T-Systems International GmbH page 10 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 2.2.1 Website ServiceNet “VOLKSWAGEN GROUP”
The start page for the VOLKSWAGEN Group Reference CATIA Lite (VWGRCLite) is given in ServiceNet in
the following link: https://vwgroup.t-systems.com.

In the public area you find all relevant about the topic License Order (application licenses, support, etc.),
plus many important additional Information around the Volkswagen Group Reference CATIA (GRC).

The non-public area of ServiceNet contains downloads of the currently released VWGRCLite Packages.
The non-public pages are marked by a red snap-lock symbol.

T-Systems International GmbH page 11 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 2.2.2 ServiceNet account - Registration and “Forgot your password?”
To get a ServiceNet Account please use the “Registration” Link at the top right or the “Registration” Button
and enter the required information. Please notice the entered E-Mail-Address is equal to your account.
Access is granted only after a contract for a VWGRClite and/or VWGRCLite application has been
concluded.

By using link or button “Forgot your password?” a new password could be generated.

2.2.3 ServiceNet - Short links

You could find an overview of all Short links around VWGRCLite at:
https://vwgroup.t-systems.com/shortlinks

T-Systems International GmbH page 12 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 2.3 Special supply “OEM Startpart”
A general distribution of the "OEM Startpart" for development partner isn’t allowed.

The "OEM Startpart" is provided in an extra web site called "Specials".

To access the appropriate page, click on the following link:

https://vwgroup.t-systems.com/oem-startpart

If you are interested to access on this site, please send us an e-mail to our address cax-service@t-
systems.com and we will generate a username and password for you. Please write as a reference "OEM
Startpart is needed". In addition, your full contact details (First name, Surname, e-mail-address, phone number,
company address) and an information for which VW / AUDI department your company works, is required.

Please note that your data will be examined by VW / AUDI. After a successful test, the release of the GRC-
Specials download area is issued.

T-Systems International GmbH page 13 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
3 VWGRCLite applications / VX1 licenses: Order, delivery,
changes
3.1 T-Systems order process
T-Systems has changed the order process for the Volkswagen CAA applications. You can create the contract
by yourself with the data you provide in the order tool. Hereby you will receive binding price information from
us. This is not an internet order process.

Attention! To create the license T-Systems need the singed Order Form sent by you via fax or mail.

Please find a detailed description of the ordering process with the following link
https://vwgroup.t-systems.com/orderprocess

Please send the contract via fax to our fax number +49 391 580 248 942 or
via mail to [email protected]

3.2 Support Package

T-Systems provides a support package for your current license period based on the CATIA V5-6 environment
of the brand Volkswagen. This allows you or your ICT to retrieve support services when facing problems.

You can order a support package for €400 directly when ordering a license. For new customers the order of
the support package is mandatory. Orders of new customers without a support package will not be processed!

The support package contains the following services:

▪ Support for the installation of VWGRCLite via e-mail or at the discretion of T-Systems via the
telephone (up to a maximum of 4 hours of support per contract year).
▪ Change of licenses for technical reasons permitted once per contract year.

If you as a regular customer wish to order the support package during your current license period the current
license must be renewed by 1 year as well. The remaining time of the old license will be credited against.

T-Systems International GmbH page 14 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 3.3 Premium Contract Support
T-Systems provides a premium contract support for €200 excl. VAT.

The premium contract support contains the following services:

▪ Contract related consulting by our consultants – maximum of 1 hour

▪ Determination and recording of the necessary machine data
▪ Creating and sending of the contract form via e-mail
▪ If necessary login to the company-owned order tool

This premium contract support applies to the following products:

▪ BoM2KSL
▪ DoLittle
▪ Engineering Package
▪ Standard Package
▪ VALIDAT
▪ VWMetho

3.4 License type – Nodelocked / Floating / Site / Corporate

Licensing is restricted respectively to one place of use with Nodelocked or Floating licenses. A place of use is
defined by the business premises at the postal address stated in the contract form.

Nodelock licenses are issued to a certain physically workstation. The usage is restricted to that physically
machine. The quantity of concurrent license users is 1.

Floating licenses are issued to 1 physically license server or 3 physically license servers (triad). They are not
restricted to a certain workstation. The quantity of concurrent users is determined by the quantity of ordered
licenses. An "Initial Floating license" is a Floating license of a CA application with 1 user on 1 physically license
server or a physically triad at 1 place of use. An "Additional Floating license" is an additional license to the
"Initial Floating License" of a CA application on the same physically license server or physically triad at the
same place of use (same CPU-ID).

Site licenses are Floating licenses. The provided license file will contain 999 Floating licenses.

Corporate licenses are Floating licenses. The provided license file will contain 999 Floating licenses. The use
of Corporate licenses is not limited to one site, but to the number of sites specified on the order form. Use at
more sites is prohibited.

In the event of an infringement of the license agreement, no support will be provided.

T-Systems International GmbH page 15 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 3.5 Technical specifications for license order / license
How do I determine the technical specifications for the license order?

3.5.1 Technical specifications for VWGRCLite and VWGRCLite Application

licenses
The VWGRCLite and the VWGRCLite Applications are FlexNet (company FLEXERA SOFTWARE) license-
supported. We require some technical specifications from your computer (in case of nodelock licenses) or
from your FlexNet Server (in case of Floating licenses) so that your licenses can be created.

WIN: ipconfig /all (MAC address of network card)

AIX: uname –m
redhat: ipconfig /all (MAC address of network card)

In case multiple addresses are output: Please use only the physical address of the Ethernet adapter LAN-
Connection as CPU-ID.

3.5.2 Technical specifications for a license change of the VWGRCLite and/or the
VWGRCLite Application
If a license switch is necessary, due to a server change e.g., we will require following information:

CPU-ID of the new server

CPU-ID of the current server
Products/Licenses related to the change

It would be helpful to send the old license file, or the license mail we sent before.

3.5.3 Technical specifications for VX1 licenses – DSLS (Dassault Systèmes

License Server)
CATIA only supports DSLS. The Software and additional information are available on the Dassault
Systems website: (https://www.3ds.com/support/).

VX1 is CATIA V5-6 software and DSLS licensed. Technical specifications of your computer (in case of
Nodelock licenses) or of your DSLS server (in case of floating licenses) is required so that VX1 licenses
can be created.

Under the following link you can find a tool for determining the VX1 DSLS ID:
http://www.3ds.com/terms/software-keys/?xtmc=DSLicTarget&xtcr=1
under "LICENSE KEY TOOLS"

T-Systems International GmbH page 16 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 3.5.4 Technical specifications for a VX1 license change
If a license switch should be necessary due to, for example, a server change, we will require following
information:

DSLS ID and OS level of the new server

DSLS ID and OS level of the current server

It would be helpful to send the old license file or license dispatch mail.

3.6 License Switch (VWGRCLite, VWGRCLite Application and VX1)

Processing a subsequent license change (so-called license switch) for technical reasons permitted once per
year for VOLKSWAGEN VWGRCLite or VX1 licenses costs 195 € net.
In order to assign a license switch, please use our change form from the ServiceNet. The change form is
available for download in the ServiceNet at topic “License Order” under heading “Ordering Process”.

Please send the signed form to our fax number +49 391 580 248 942.

The change process will be charged per incoming FAX. This change can consist of multiple licenses

(VWGRCLite, VWGRCLite Applications, VX1) which are part of this license switch order.

Dassault needs the filled out form „DASSAULT SYSTEM LICENSE KEY REQUEST FORM “ to change the VX1-
License. This form could also be downloaded in the ServiceNet at topic “License Order”

If the VX1 licenses should be changed several times during its validity period, then only the respective
processing fee of the change procedure is levied.

If the existing VX1 license expires regularly, it can be ordered on request free of cost. Thereby, a new server
can be entered.

T-Systems International GmbH page 17 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 3.7 Purchasing of PX1 and VX1 License
Where do I get the PX1 license? How much does the PX1 license cost?

Where do I get the VX1 license? How much does the VX1 license cost?

You can purchase the PX1 license from Dassault, or a Dassault Business Partner. The PX1 license is not free of
charge.

As a VOLKSWAGEN development partner you can obtain the VX1 License free of cost through T-Systems if a
contract for a VWGRCLite Application has been already concluded (Engineering Package, Standard Package
or VWGValidat Professional).

3.7.1 Process of the VX1 order:

What happens with a VX1 order?

T-Systems initiates the generation of the license once weekly with Dassault Systemes. When T-Systems
receive the license from Dassault Systemes, it will be delivered immediately to the development partner.

Note:
Dassault generates the VX1 license only if T-Systems provide the following data:

Company and contact person

Street / house number
postal code, city
Email address and
telephone number.

By ordering, you authorize T-Systems to share this information with Dassault.

Note:
A VX1 license requires a PX1 license. A VX1 license without the PX1 license does not bring any
functionality.

In order to be able to use the VX1 license, the VX1 software should also be installed at the workstation.

3.8 VWGRCLite – Enhancement of license feature

To use the VWGRCLite, a special FlexNet license feature (VWGRCLITE) is required. VWGRCLite Application
license (e.g. VALIDAT, Standard Package or Engineering Package) is delivered with the additional VWGRCLite
license with the feature name VWGRCLITE. The VWGRCLite license feature is free of costs and is necessary
for the use of the VWGRCLite GUI.
Separate ordering of VWGRCLite licenses is not intended.

For more information according to VWGRCLite please have a look at https://vwgroup.t-

systems.com/vwgrclite-news

T-Systems International GmbH page 18 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
4 Licensed VWGRCLite Applications
VOLKSWAGEN Applications-Bundle and also the VOLKSWAGEN single applications are available in T-Systems
ServiceNet.

The applications in the packages provided here and also the single applications are the efficient help material for
adhering to the VOLKSWAGEN norms/construction standards in the CAD system CATIA. The adherence to the
VOLKSWAGEN norms/construction standards forms the basis for the coordination with the VOLKSWAGEN group.

Where will I get information about the required VWGRCLite applications?

Please coordinate with your VOLKSWAGEN contact person regarding the requirement of the VOLKSWAGEN
applications. It can be different depending on your specific task.

4.1 License-Bundle
Why do two License-Bundle existing?

What is the difference between License Bundle “Standard Package” and “Engineering Package”?

Is it possible to order individual components of a package?

The frequently required applications have been compiled in the packages. There are differences in case of the
VOLKSWAGEN brands. Thus, it came about that, for example, the specification for the using the Engineering
Package has been prepared by AUDI for the development.

The contextual difference between the Engineering Package and Standard Package is that the Standard
Package does not include VALIDAT Basis.

Except for VALIDAT, no single components of a bundle can be ordered separately.

4.1.1 Standard package

The standard package consists of:

KVS-PlugIn
NTool
Netline V5
OutGen
RPS
LTA
VTA

T-Systems International GmbH page 19 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 4.1.2 Engineering package
The engineering package consists of:

VALIDAT Basis
KVS-PlugIn
NTool
Netline V5
OutGen
RPS
LTA
VTA

4.2 Licensed VWGRCLite Single applications

For the following single application licenses can be ordered:

BoM2KSL
DoLittle
VALIDAT V5 Basis
VALIDAT V5 Professional
VWMetho (consists of “ABBRICH”, “FLAN” and “SURPRESS”)
VWGCADGlyph
VWGVarTool
VWGVEM
3DZP (FTACaptureAid license)

T-Systems International GmbH page 20 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 4.3 Short descriptions VWGRCLite Applications
At what can the VWGRCLite applications support me?

4.3.1 VALIDAT
VALIDAT assures adherence to the data quality corresponding to the VOLKSWAGEN Norm 01059 part 6.
Your CATIA V5-6 documents are checked with some company-specific criteria for the adherence to this
norm.

For several messages in VALIDAT repair functions are available.

VALIDAT can carry out a structure analysis of the CATIA model. Validat Basis performs a simplified link
analysis, Validat Professional performs an exact link analysis using your PX1 and VX1 license.

A PX1/VX1 license is still needed for automated directory monitoring of assemblies (ZSB, KPR) with
VALIDAT Batch (Watch directory). For more details see VALIDAT structure analysis .

The quality of the changed data is evaluated as per the unique criteria with VALIDAT as the check
program executes a control of the created CAD data as per the VDA recommendation 4955/4. Thus the
quality of the CAD elements and element connections can be determined as per the defined check
criteria. According to the check requirements tolerance values can be set and saved. The graphical
representation of the check results enable quick and target-oriented search of different areas and
elements.

VALIDAT is available in the expansion stage: Basis and Professional. For details see "Difference
VALIDAT Basis / VALIDAT Professional"

4.3.2 KVS PlugIn

The KVS PlugIn provides – like toolbar integrated in CATIA – efficient functions for the structure check of
CAD documents, for creating VOLKSWAGEN TAR archives and for saving the data in KVS.

PX1 and VX1 license are additionally required for the KVS PlugIn.

4.3.3 NTool
The VWGRCLite Application name tool V5 (NTool) supports the CAD user while giving standardized
document names as per the instructions of the VOLKSWAGEN group. The user will efficiently manage the
existing and new documents for the correct naming through screens and menus. The naming conventions
saved in the profile can be customized according to the individual requirements. With the corresponding
CATIA licenses, NTool continuously supports the avoidance of incorrect links.

PX1 license is required for several NTool functions (see also "Benefit of VX1 / PX1 license").

T-Systems International GmbH page 21 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 4.3.4 Netline V5
Netline V5 provides the CATIA users with a function using which netlines can be created in the in CATIA
V5-6 CATDrawings as well as in the ground level and in any section views with the corresponding caption
and with the adjustable netlines distance. The application netline provides functions for creating,
modifying and deleting the netgrids. The net to be created is using the line type and line width, line
distance, text size and text position as well as the scaling in a panel. The view level is determined
automatically and the netgrid is created within the earlier indiced points as connection.

4.3.5 OutGen
Outgen generates interactive menu-driven process chain adapter according to the method instruction of
VOLKSWAGEN group.

4.3.6 RPS
RPS is an application to support in CATIA V5-6 the process for the generation of reference elements.
Therefore special RPS features are generated and stored in CATIA models. These features can also be
displayed in a table.

The application RPS is released since the GRC4.1.1. Basically, you should check with your
VOLKSWAGEN contacts which CAAs and which methodology are to be used. In particular tune which
RPS is allowed to be used, the VEM/ RPS macro or the CAA-RPS.

4.3.7 LTA
LTA is an application to support in CATIA V5-6 the process for the generation of LTA elements. Therefore
special LTA features are generated and stored in CATIA models. These features can also be displayed in a
table.

4.3.8 DoLittle V5
DoLittle is a system for creating multilingual CAD-constructions.
It supports the constructor online in case of multilingual text entry in the CAD-systems on the basis of a
central company-specific collection of design texts.

With DoLittle, T-Systems has the suitable solution platform ready for the development partner of
VOLKSWAGEN group: a system for supporting the constructor in case of creating multilingual CAD-
constructions on the basis of a company-specific text catalogue. The central data base records a lot of
text entries ; unavailable translations can be directly asked for in the system.

Even if the DoLittle-module is independent of the set CAD-system, the specific integration offers special
advantages in the leading platforms CATIA® and CREO. DoLittle supports the language directions
“German – English”, “English - German”.

We recommend for more Information about Dolittle the documents “Dolittle_Getting_Started” and
“Dolittle_UserManual”. Please find this documents as a Zip-archiv for download at https://vwgroup.t-
systems.com/download-dolittle under section “Dolittle DOCUMENTATION”.

T-Systems International GmbH page 22 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 4.3.9 BoM2KSL
The VWGRCLite Application “BoM2KSL” provides all essential functions for compliance of the company
specifications for parts lists and transfers the created parts list to KSL as background process via XML.

4.3.10 VWMetho
The VWGRCLite Application “VWMetho” consists of the individual elements “ABBRICH”; “FLAN” and
“SURPRESS”.

ARBRICH supports the definition/analysis of restriction directions. According to the border angles
specified by the user, one or if this is not possible under the compliance of permissible angle, more
restriction directions are suggested for the selected restriction edges.

The selected restriction edges are analysed and are marked as IO, warning or critical accordingly. The
result of the analysis can be saved in the model. The visualisation is then possible, if required, also without
corresponding license.

The application FLAN provides functions for ascertaining the restriction outlines of altered components
(adapter) in the areas of non-altered blank (addendum) for CATIA V5-6 and development of upper
bevelling parts with constants and with variable radius.

4.3.11 CADGlyph
CADGlyph is a tool for three-dimensional text generation in CATIA V5-6. The text can be generated on
surfaces with any curvature. The text is associative and always adjusts to the curve selected, even if the
text includes multiple lines. The major advantage of this is that the text is generated with tangentially
constant surfaces that are reduced to a minimum. This opens up more possibilities and improves the
performance when compared to DXF.

4.3.12 VWGVARTool
VWGVarTool (internal designation: Variants Tool) is a tool to generate and control variants in CATIA V5-6.

A CATIA V5-6 tree structure with all relevant assemblies and parts is transferred by the VWGVarTool
automatically into an Excel list. The imported structure result can be smaller and clearer, if using a 3D
filter.

Then the user can define in Excel the desired variants. With VWGVarTool can be switched afterwards into
a defined variant (CATIA V5-6 view control). The variants control can be transferred also into a pure V5-6-
function. In this way it is also possible to use the variants control without VWGVarTool. This V5-6-function
was made for group work or suppliers without variants tool.

T-Systems International GmbH page 23 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 4.3.13 3DZP
3DZP is a software package to create captures in CATIA V5-6. The package contains the CAA FtaCaptureAid
incl. the required settings (FTA: „Functional Tolerancing & Annotation“).
The creation of captures is particularly used at 3DZP for finishing 3D documents.
With a capture you can define views in CATIA V5-6. A capture does not only contain a perspective view of a
part it also defines hide- and show elements, dimensioning, texts and tolerances in a preferred zoom factor.
To create captures there have to be views in your CATIA V5-6 data. In the process of 3DZP you have to create
at least the “All_Initial_Capture” which can be done with the tool FtaCaptureAid.
FtaCaptureAid can be used in CATParts and CATProducts.

5 VALIDAT
Which uses do I have, if I apply VALIDAT?

What is the difference between the version “VALIDAT Basis” and “VALIDAT Professional”?

What is the meaning of structure analysis with VALIDAT?

With VALIDAT, the quality of exchanged data is assessed as per the uniform criteria, because the checking
program executes a checking of created CAD-data according to the VDA-suggestion 4955/4. Thus the quality of
CAD-elements and element connections is ascertained as per defined checking criteria. The tolerance values can
be set and saved according to the checking requirements. The graphical representation of checking results
enables a quick and target-oriented detection of various areas and elements.

T-Systems International GmbH page 24 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 5.1 Difference VALIDAT Basis / VALIDAT Professional
With the VALIDAT Software, a current criteria list is delivered. In this list, there is a comparison of repairing
services between basic and professional expansion. Apart from that, it can also be ascertained from this list,
whether specified criteria for VOLKSWAGEN are relevant or not.

In the consideration in case of repairing services, the difference is that two of them are only in the version
“VALIDAT Professional”, otherwise the versions are identical. The following table shows which out of them are
currently available.

Below is the overview of sorted criteria list with the differences between basis and professional with reference
to the relevance for the VOLKSWAGEN criteria.

The criteria list is always subject to further customizations – please check this in case of updates.

The VALIDAT basis and the professional version fulfil the checking requirements as per VOLKSWAGEN Norm
VW 01059 part 6. VALIDAT professional fulfils the requirements as per SASIG/VDA certification. With VALIDAT
professional, you can thus check more criteria. The checking scope exceeds the requirements of Volkswagen.

The above extractions from the criteria table are valid only for the VALIDAT Version 7.0.2. The allocation of
criteria to the licenses basis and professional can be changed in the coming versions.

T-Systems International GmbH page 25 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
5.2 Benefit of VALIDAT-Professional license
Where does the VALIDAT-Professional License bring a benefit?
Each development partner must decide for himself, if the Validat Professional functionality has a benefit for him.

5.2.1 Check Result - handling and information content of standard check window
enlarged
The Check Protocol for the check result can optionally be displayed as soon as the check has been
completed, but it can also be opened at any time using the protocol icon in the VALIDAT main menu.
Here, users can also further evaluate the check results and even provide approval if appropriate.
The handling and the information content of the standard check windows can be enlarged by connecting
of the professional-license under Tools/Options.

Please refer to Validat manual for more details.

T-Systems International GmbH page 26 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 5.2.2 Automated VALIDAT Check of CATIA Data
In batch mode, it is possible to activate an automatic time-defined check. The specific Directory is
monitored for CATIA Data to be checked. Thereby for example your CATIA Data can be checked
overnight.

For the automated VALIDAT Check of assemblies (ZSB, KPR) a PX1 license is also required because the
root document has to be checked. An automated check of CATParts is possible without a PX1 license.
Have a look to VALIDAT structure analysis

Detailed information about the automated directory monitoring could be read in the VALIDAT User
manual.

5.2.3 VALIDAT Professional License released automatically

Since VALIDAT 2.4.x Version the Professional license is automatically released after each use of a
VALIDAT function.

With VALIDAT Basic the license is kept granted until VALIDAT Toolbar is closed.

Notice - it is not necessary to finish the current CATIA Session; simply the VALIDAT-Toolbar needs to be
closed. This could be done within the Pulldown Menu “View- Toolbars” by unmark “VALIDAT Version
X.X.X”, e.g.
It is also possible to enable the license by deselect “Basic” under „Tools- Options ...“ as shown below.

T-Systems International GmbH page 27 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 5.2.4 VALIDAT CATDua - extra Clean Option
Geometric changes after a VALDAT-CATDUA-Clean can be displayed with the VALIDAT Professional license.
For this purpose, the switch "Check modification of gem. elements " must be active.

T-Systems International GmbH page 28 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 5.3 VALIDAT structure analysis
You can run the structure analysis and link checking of CATIA V5-6 data locally on your computer. In case of
successful checking of the structure you are guaranteed that the CATIA V5-6 data is not rejected by HyperKVS
due to this criterion.
Validat Basis performs a simplified link analysis, Validat Professional performs an exact link analysis using your
PX1 and VX1 license.

The function for the simplified link analysis (without PX1/VX1), existing since VALIDAT version 2.0.7, became
with VALIDAT version 2.3.6 the standard testing method.

A PX1/VX1 license is still needed for automated directory monitoring of assemblies (ZSB, KPR) with VALIDAT
Batch (Watch directory) because the root document has to be checked. The automated directory monitoring is
only available in the VALIDAT Professional Version.
For automated directory monitoring of CATParts with VALIDAT Batch, only a VALIDAT Professional license is
required, no PX1.

5.3.1 Historical background

The structure analysis option was not integrated up to VALIDAT Version 1.3.0 in VALIDAT. The structure
analysis took place in the checking process of HyperKVS.

The option for local structure analysis has been created on the request of the development partners. It has
been justified on the part of development partners that a rejection of the data in the HyperKVS due to
incorrect structure is a big-time factor and if this could have been locally checked, this loss of time could
be avoided.

With the introduction of VALIDAT Version 1.3.0, the option has been created to execute the structure
analysis also with VALIDAT.

T-Systems International GmbH page 29 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
6 Benefit of VX1 / PX1 license
Where does PX1/VX1 bring a benefit?

VOLKSWAGEN recommends the deployment of PX1 (plus VX1). Since the PX1 license is not free of charge, each
development partner must decide for himself, if the functionality acquisition has a benefit for him.

Note:
A VX1 license requires a PX1 license. A VX1 license without the PX1 license does not bring any functionality.

The PX1/ VX1 license is required for the following VWGRCLite Applications/Functions:

▪ NTool New From

▪ NTool Send To
▪ NTool Save Management
▪ KVS Plugin
▪ VALIDAT Professional – Automated Check, see Automated VALIDAT Check of CATIA Data
▪ VWGVarTool - VarTool batch starts functions “NTool Convert To …“ and “NTool Save Management“
▪ LTA RPS Diagnostic tool - option “Attach actually loaded model to the report”

7 Release of operating system / CATIA V5-6 combinations

The software is only provided for MS Windows 10 64 bit.

Since 01.01.2020 Windows 7 no longer released for VWGRCLite 7.1.5.x.

Chapter 2 of VWGRCLite Installation Guide gives more details, for example which language package and security
update are allowed.

VWGRCLite Operating system CATIA V5-6

7.1.5.x. MS Windows 10 64bit CATIA V5-6R2018 SP03 Hotfix 27

There should be a bilateral agreement between the Volkswagen department and the development partner about
the usage of a system environment.
Every usage of a non-Volkswagen released operating system and CATIA V5-6 combination is done on your own
risk and will be not supported by Volkswagen in case of a problem.

T-Systems International GmbH page 30 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
8 License manager FlexNet
The VWGRCLite and the VWGRCLite Applications are licensed for FlexLM respectively FlexNet as license
manager.

If you have licenses of the type “floating”, then a license server is required. If you have licenses of the type
“Nodelock” then a license server is not required.

The adequate license manager could be downloaded at the ServiceNet. You will find the actual required FlexNet
software at the short link https://vwgroup.t-systems.com/flexlm.
Here you will find software for the VW supported There you will find the software for the platforms supported by VW
and documentation for implementing of FlexNet licenses, as well as the topic of borrowing licenses.

9 Contacting the VWGRCLite Service Team – Service Desk

If you have questions concerning the VWGRCLite environment or the VWGRCLite Applications, please contact our
Service Desk. The Service Desk can be accessed in the following ways:

▪ By telephone (Service Desk): +49 375 606199-19

▪ By e-mail (central mailbox): [email protected]

See also https://vwgroup.t-systems.com/cax-contact

9.1 You direct an inquiry to CAx Service, by telephone or email

Please specify your complete contact data this makes the subsequent contacting easier.

Also, so that your query reaches the correct processor, please simultaneously specify what type of query you
have. e.g.:

▪ Questions on the order process or order form

▪ Proposal for Applications or Services
▪ Problems/Questions on VWGRCLite Installation
▪ Questions on integration of VWGRCLite Applications
▪ Registration of an application problem (software error)
▪ lodging a request (requirements to VWGRCLite or an VWGRCLite Application)

In case of problems with the VWGRCLite and/or the VWGRCLite Applications, please compile a traceable
problem scenario based on a current VWGRCLite environment (VWGRCLite-Support Mail, screenshots, log
files, configuration, working step till cancellation…) Note that the installation, configuration and use of the
VWGRCLite must be in accordance with the documentation provided by Volkswagen.

Principle send the content of the VWGRCLite-Support Mail. See VWGRCLite – Support Mail

T-Systems International GmbH page 31 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 9.2 Reporting errors/problems related to VWGRCLite
Before reporting a problem, please have a look into the Known Problems list first (https://vwgroup.t-
systems.com/problems).
Problem reports need a minimum amount of detailed data.
Please find a checklist and a document with further information on the page https://vwgroup.t-
systems.com/issues.

For an issue or an error, please send us the following data:

▪ an understandable and comprehensible scenario of the issue or error

▪ the information according to the checklist
▪ the used license file

Hint:
The requested “Support Mail” could be generated within the VWGRCLite GUI at menu “Help”.
Please refer to VWGRCLite – Support Mail.

Attention:
For a thorough problem analysis possibly test data will be required.
Please do not share test data that are uncritical shippable via email and only after direct consultation with the
VW Problem Management!

Reports with insufficient data cannot be processed!

9.3 Procedure for lodging a request

In order to implement requirements to VWGRCLite correctly, Volkswagen requires a precise description of the
desired functionality.
A specification document, which must be delivered completely, is provided on the page https://vwgroup.t-
systems.com/request.

Please do not summarize a collection of enhancement requests. Every requirement is done separately. For
each request there is one incident number and one associated request number at VW.

We cannot give a warranty on the implementation of your requirement. The evaluation of your request for
further development of VWGRCLite/ VWGRCLite Applications is the responsibility of software manufacturer
(VOLKSWAGEN).

T-Systems International GmbH page 32 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
10 Best Practice
10.1 One way to configure the KVSPlugin
1. Create a directory named .kvsi in the directory $USERPROFILE
2. In this directory ($USERPROFILE/.kvsi) create a file named caddies.conf
The content of caddies.conf could look like this:
COMMON.TO_KVS=${USERPROFILE}:\KVS_EXCHANGE\TO_KVS
COMMON.FROM_KVS=${USERPROFILE}.\KVS_EXCHANGE\FROM_KVS
COMMON.KVS_BROWSER_PATH=IEXPLORE.EXE
COMMON.KVS_SERVER=https://kvspfv1.pfn.vwg:8081
COMMON.KVS_TRANSFER_LOG=${USERPROFILE}/.kvsi/transfer.log
CATIA.PX1_USAGE=1
CATIA.VX1_USAGE=1 (after entering this „1“ there must be a Enter so that the cursor jumps into a new line
before saving)
3. Copy also the content of item 3 in a file named master_caddies.conf. Location is .kvsi too.
4. Set the system variables $CADDIES_HOME and $KVSPLUGINPATH
(Control Panel/System/Advanced/Environment Variables)
This variables could be for example:
$CADDIES_HOME=${USERPROFILE}/.kvsi
$KVSPLUGINPATH=${VWGRCLITE_K_PATH}\catia\vwgrclite_621090\opt\oem\vw_group\R26\CAA

Note:
A DASSAULT PX1 and a VX1 license must be available thus the KVSPlugin works.

An example output of “Shows „CAA-Diagnostic-Tool “-Button

Usage:
After using the KVS-structure-check your saved CATIA Data can be stored in KVS supported by KVSPlugin.

T-Systems International GmbH page 33 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
11 GRC 7.1.x – What’s new
Please find the actual NEWS for VOLKSWAGEN Engineering Partner at https://vwgroup.t-systems.com/vwgrclite-
news.

11.1 VWGRCLite Web-Installer rollout - Dec 12, 2019

The rollout of the Volkswagen VWGRCLite Web-Installer is scheduled for January 6, 2020. The VWGRCLite Web-
Installer will support you in obtaining the VWGRCLite packages and in setting up the VWGRCLite environment on
the end user system. It is a locally executed application that dynamically downloads the packages required to
configure the VWGRCLite environment from the VWGRCLite ServiceNet and optionally installs them on the target
system.

In order to be able to use the VWGRCLite Web-Installer, you need a user account for the VWGRCLite ServiceNet.

The current provision of the VWGRCLite packages on the VWGRCLite-ServiceNet will continue in parallel during a
planned transition period of 6 weeks. According to this, VWGRCLite packages can only be obtained using the
VWGRCLite Web-Installer.

Important:
The guidelines, rules and specifications communicated in the project and the agreements on the system
environment (VWGRCLite) continue to apply.

11.2 NEWS - New DoLittle package 7.0.1.2.0 available - Sep 6, 2019

For VWGRCLite 7.1.5.1.0 the new DoLittle package (version 7.0.1.2.0) is available at the ServiceNet since
09/06/2019.

Due to extended security requirements of the DoLittle server, the DoLittle Client had to be modified. The
VWGRCLite DoLittle package 7.0.1.2.0 contains the DoLittle Client version 4.5.3.

More details on changes can be found in the DoLittle Release Notes and the updated documentation in the
vwgrclite_vwgdolittle_documentation.zip package.

The installation of DoLittle 7.0.1.2.0 must be done till 09/30/2019 at latest.

After 09/30/2019 the DoLittle server will only answer requests from a DoLittle client if it has at least version 4.5.3.

The VWGRCLite DoLittle download for software and documentation can be found at
https://vwgroup.t-systems.com/download-dolittle

Your current DoLittle access-data remain valid within the new DoLittle version.

Any used dss-files can still be used if they have already been created with the current DL_DssAdmin (Version
7.0.0).

When using a partner company access (CSN), pay attention to the also available documentation
REQUIREMENTS_CERTIFICATES.pdf.

T-Systems International GmbH page 34 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
11.3 NEWS - Important information about the VWGRCLite 7.1.5.1.0 patch -
Aug 8, 2019
Since 08/08/2019 VWGRCLite Version 7.1.5.1.0 is available at the ServiceNet.

Following changes:

▪ CATIA V5-6R2018 SP03 HF27 (among others the CATIA problems with shareable licenses has been
solved)
▪ Base Paket Version 7.1.5.1.0 (with bug fixing from NTool, OutGen, Validat)
▪ Seat Markenpaket Version 4.0.0.1 (Drafting / Layout settings issue has been fixed)

Change details can be found in the provided Release Notes (VWGRCLite_71510_Release_Notes_EN.zip).

All other packages from the VWGRCLite 7.1.4.5.3 can also be used for the VWGRCLite 7.1.5.1.0.

An overview with links to all released VWGRCLite packages can be found at:
https://vwgroup.t-systems.com/vwgrclite

Please note: With VWGRCLite 7.1.5.1.0, Windows 7 is only supported until 31.12.2019. A timely transition to
Windows 10 is recommended.

The switch from VWGRCLite 7.1.4.5.3 to VWGRCLite 7.1.5.1.0 must have taken place at the development partner
from 08/08/2019 to 09/30/2019.

In case of problem (e.g. use of CATIA shareable licenses) the switch is recommended immediately.

Keep in mind: Only for the currently released VWGRCLite support is provided.

Important: The project agreements about terms of reference, rules and specifications as well as the system
environment (VWGRCLite) are still valid.

T-Systems International GmbH page 35 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
12 Known Problems
Please note the Known Problems at https://vwgroup.t-systems.com/issues. This page contains information
about problems/workarounds, which become known with latest VWGRCLite.

12.1 File %TEMP%\.inst_grx.lock

During an (un-)installation errors can occur which leave a file named “.inst_grx.lock” under %TEMP%. This file
then blocks any further (un-)installation procedures. Deleting this file can help then.

12.2 Installation on existing VWGRCLite installation

On the initial installation of the Base Packages, neither the VWGRCLite rootdir must exist, nor the VWGRCLite
environment variables. Uninstallation with VWGRCLite Installer GUI or VWGRCLite Installer command line
must be set. Therefore prior to installing a new VWGRCLite release, the previous VWGRCLite version must be
uninstalled entirely.

The uninstall process is described in detail in "VWGRCLite Installation Guide", which could be found on the
page “VWGRCLite Information“.

T-Systems International GmbH page 36 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
13 VWGRCLite
The VWGRCLite includes the released CATIA partner environments of participating Volkswagen brands and
departments.
Additionally a set of licensed Volkswagen applications are integrated into the VWGRCLite.

For access to all information and downloads of the current released VWGRCLite you have to do the registration as
described in chapter 2.2.2 ServiceNet account - Registration and “Forgot your password?”.

After Login you have access to this VWGRCLite page VWGRCLite:

T-Systems International GmbH page 37 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 13.1 VWGRCLite – requirements and prerequisites
Before you install any software, it is essential to read the information and documentation about VWGRCLite
installation/administration on the page “VWGRCLite Information“.

13.2 VWGRCLite – Tips and Tricks

13.2.1 Service Net – Quicklinks Brands

At ServiceNet there are Quicklinks for customers who are familiar with the VWGRCLite installation
procedure.
There are two possibilities to find all the downloads of the VWGRCLite for a corresponding brand.

T-Systems International GmbH page 38 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020
 13.2.2 VWGRCLite – Support Mail
If you want to report a problem regarding the VWGRCLite to the CAx-Service (support interface
regarding the VWGRCLite), please use the function “Support Mail” in the menu “Help”.
Using this function will collect all relevant information about your system environment. Following this an
Outlook mail with the recipient [email protected] and the collected information will be
displayed.

In case of problems regarding VWGRCLite applications (e.g. Validat, NTool, etc.) you should extend this
mail by a reproducible problem scenario description (e.g. steps taken until the problem occurs, output of
diagnosis functions of the application, screenshots, etc.).

Important hint: If you want to report a problem, please regard the Volkswagen „checklist “ at
https://vwgroup.t-systems.com/issues.

Caution: It is recommended to let your administrator, or your CAD support, check those problems first,
before reporting them to the CAx-Service.

13.2.2.1 VWGRCLite – Support Mail without Outlook installation

The automatic support mail will be created only if Microsoft Outlook is installed and configured as the
default mailing application. If this is not the case, you will be asked to save the needed VWGRCLite log
and system files (e.g. to C:\temp). Afterwards you can attach them to your e-mail.

T-Systems International GmbH page 39 of 39

FAQ List for VWGRCLite and VWGRCLite Applications,
Version: 02.2020