FORMATO DE PARTES Y HERRAMIENTAS

CHALLENGER 605

MPD - Section 1.3 Program 605 Revision Number 21 Dated 12182019

TLMC TOOLS AND
Chapter 5 Task No. AMTOSS/NDT No. Task Title Task Interval Zone Access REFERENCE DESIGNATION PART NUMBER CAGE Code QTY SUPPLIES SPARE
Section EQUIPMENT
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−54−01 TEST SET - TRANSPONDER/MODE "S" RAMP ATC−601−2 51190 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−50−01 TEST SET - NAV/COMM/MKR IFR 4000 0Z3C6 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34C−50−01 VOR NAV ANTENNA SHEILD G1003450044−001 24210 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−00−04 KIT - DATA BUS ANALYZER 01−1404−00 41364 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−00−04 SOFTWARE (NOT INCLUDED) 60−0631−00 41364 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−10−04 AIR DATA TEST SET ADTS−530 U0427 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−10−11 RAMP TEST SET - AIR DATA 622−8624−001 13499 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−50−03 TEST SET - TRANSPONDER/DME 9001−5802−000 (IFR 6000) 51190 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 34−54−03 ANTENNA SHIELD 7005−8142−200 51190 3 OR 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. Commercially Available Signal Generator (200CD or equivalent) N/A N/A 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 10−10−14 PIN - ADG GROUND LOCK G600−100017−1 88308 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. GSE 10−10−30 PROTECTOR - ADG BLADE G600−100030−143 88308 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. Commercially Available Meter, Phase Sequence N/A N/A 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. Commercially Available Solder Iron N/A N/A 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. Commercially Available Wrench, Torque 22.5 to 27.5 lbf in (2.55 to 3.10 Nm) N/A 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. Commercially Available Wrench, Torque 6 to 8 lbf in (0.68 to 0.90 Nm) N/A N/A 1 X
22-12-00-201 22−12−22−220−801 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 221, 222 221AZ, BZ, CZ,RZ, TZ, 222AZ,BZ, RZ
the Flight Compartment. Commercially Available Wrench, Torque 20 to 25 lbf in (2.26 to 2.82 Nm) N/A N/A 1 X
22-12-00-203 22−12−22−220−803 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection of 96 M 5-24-10 325 325DR
the Vertical Stabilizer - Internal Commercially Available Wrench, Torque 25 to 35 lbf in (2.83 to 3.95 Nm) N/A N/A 1 X
22-12-00-205 22−12−22−220−805 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 165
the Fuselage between FS409.00 and FS621.00, below WL73.5 - Internal
Commercially Available Wrench, Torque, 25 to 35 lbf in (2.83 to 3.95 Nm) N/A N/A 1 X
22-12-00-205 22−12−22−220−805 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 165
the Fuselage between FS409.00 and FS621.00, below WL73.5 - Internal
Commercially Available Wrench, Torque, 35 lbf in (3.95 Nm) N/A N/A 1 X
22-12-00-205 22−12−22−220−805 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection in 96 M 5-24-10 165
the Fuselage between FS409.00 and FS621.00, below WL73.5 - Internal
Commercially Available No. 10 Torq−Set Screwdrivers or Bits (MS33781) N/A N/A 1 X
22-12-00-206 22−12−22−220−806 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection on 96 M 5-24-10 141, 142 221CLF Tape, Self−Adhesive 0.062x1.00 in
the Avionics Racks 06−073 (1.57x25.4 mm) S8475−062−100 N/A AR X
22-12-00-207 22−12−22−280−801 Special Detailed Inspection (Borescope) of the Lightning/High Intensity Radiated Field 96 M 5-24-10 141, 142 221CLF
(L/HIRF) Protection on the #2 VHF Antenna Commercially Available Borescope N/A N/A 1 X
22-12-00-209 22−12−22−220−809 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection on 96 M 5-24-10 311, 312 311BB
the Upper FS621 Bulkhead
22-12-00-210 22−12−22−220−810 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection on 96 M 5-24-10 520, 620 572DB, 672DB
the Wing Disconnects - External
22-12-00-211 22−12−22−220−811 Detailed Inspection of the Lightning/High Intensity Radiated Field (L/HIRF) Protection on 96 M 5-24-10 141, 142
the Wing Disconnects - Internal
23-60-00-201 23−61−01−720−801 Functional Test of the Static Dischargers. 96 M 5-21-10 326, 327, 333,334, 343, 344,360,
561, 562,588, 662, 688
Commercially Available Alligator Clips (2 Required) N/A N/A AR X
23-60-00-201 23−61−01−720−801 Functional Test of the Static Dischargers. 96 M 5-21-10 326, 327, 333,334, 343, 344,360,
561, 562,588, 662, 688
Commercially Available Megohm Meter N/A N/A 1 X
23-60-00-201 23−61−01−720−801 Functional Test of the Static Dischargers. 96 M 5-21-10 326, 327, 333,334, 343, 344,360,
561, 562,588, 662, 688
Commercially Available Sponge N/A N/A 1 X
26-20-00-208 26−20−00−220−804 Detailed Inspection of the Portable Fire-Extinguisher Container. 96 M 5-21-10 220
27-00-00-204 27−00−00−220−804 Detailed Inspection of the Aileron, Rudder, Elevator and Spoiler Control Cables in the 96 M 5-21-10 165 231FLF, HLF,KLF, MLF, PLF,232FRF, HRF,KRF, MRF,
Mid-Lower Fuselage. PRF Commercially Available Glass, Magnifying − 10−Power N/A N/A X X
27-00-00-204 27−00−00−220−804 Detailed Inspection of the Aileron, Rudder, Elevator and Spoiler Control Cables in the 96 M 5-21-10 165 231FLF, HLF,KLF, MLF, PLF,232FRF, HRF,KRF, MRF, Grease, Aircraft, General Purpose,
Mid-Lower Fuselage. PRF 04−010 Wide Temperature Range MIL−PRF−81322 N/A AR X
27-00-00-204 27−00−00−220−804 Detailed Inspection of the Aileron, Rudder, Elevator and Spoiler Control Cables in the 96 M 5-21-10 165 231FLF, HLF,KLF, MLF, PLF,232FRF, HRF,KRF, MRF, MIL−PRF−16173 Grade 2
Mid-Lower Fuselage. PRF Braycote 137
LPS 3
No−Rust 27
Petrotect 2
04−020 Lubricant, Anti−Corrosion Steelgard MS−10 N/A AR X
27-00-00-204 27−00−00−220−804 Detailed Inspection of the Aileron, Rudder, Elevator and Spoiler Control Cables in the 96 M 5-21-10 165 231FLF, HLF,KLF, MLF, PLF,232FRF, HRF,KRF, MRF,
Mid-Lower Fuselage. PRF 05−001 Cloth, Cleaner, Low−Lint A−A−59323A N/A AR X
27-00-00-204 27−00−00−220−804 Detailed Inspection of the Aileron, Rudder, Elevator and Spoiler Control Cables in the 96 M 5-21-10 165 231FLF, HLF,KLF, MLF, PLF,232FRF, HRF,KRF, MRF,
Mid-Lower Fuselage. PRF 05−011 Brush, Fiber Commercially Available N/A AR X
27-00-00-204 27−00−00−220−804 Detailed Inspection of the Aileron, Rudder, Elevator and Spoiler Control Cables in the 96 M 5-21-10 165 231FLF, HLF,KLF, MLF, PLF,232FRF, HRF,KRF, MRF,
Mid-Lower Fuselage. PRF 05−053A 05−053A Commercially Available N/A AR X
27-00-00-204 27−00−00−220−804 Detailed Inspection of the Aileron, Rudder, Elevator and Spoiler Control Cables in the 96 M 5-21-10 165 231FLF, HLF,KLF, MLF, PLF,232FRF, HRF,KRF, MRF,
Mid-Lower Fuselage. PRF
27-00-00-205 27−00−00−220−805 Detailed Inspection of the Rudder and Elevator Control Cables in the Lower Mid-Fuselage 96 M 5-21-10 170 241ELF, FLF,242ERF, FRF
Compartment.
27-00-00-207 27−00−00−220−807 Detailed Inspection of the Elevator Control Cables in the Vertical Stabilizer. 96 M 5-21-10 325 311BB, 325AR,BR, BL, CL, DL Commercially Available Wrench, Torque 25 to 35 lbf in (2.83 to 3.95 Nm)
28-10-00-207 28−14−22−720−801 Functional Test of the Vent Line Shrouds. 96 M 5-21-10 222, 311, 325,327 311BB Commercially Available Plugs, Shroud Drain
28-10-00-207 28−14−22−720−801 Functional Test of the Vent Line Shrouds. 96 M 5-21-10 222, 311, 325,327 311BB Commercially Available Air Test Stand
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB 05−035 Leak Dectector, Fuel System A−A−59110 N/A AR X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB Commercially Available Test, Air Panel N/A N/A 1 X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB Commercially Available Plug, Shroud Drain N/A N/A 1 X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB GSE 28−10−04 KIT - EXTERNAL SHROUD DRAIN G600−280008−1 88308 1 X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB Commercially Available Wrench, Torque 15 to 18 lbf in (1.70 to 2.03 Nm) N/A N/A 1 X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB Commercially Available Wrench, Torque 20 to 25 lbf in (2.26 to 2.82 Nm) 1 X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB Commercially Available Wrench, Torque 27 to 33 lbf in (3.06 to 3.72 Nm) 1 X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB Commercially Available Wrench, Torque 25 to 30 lbf in (2.83 to 3.38 Nm) N/A N/A 1 X
28-10-00-208 28−22−10−720−801 Functional Test of the Motive-Flow Line Shrouds. 96 M 5-21-10 310, 412, 422 412DB, 422DB 04−011 Grease, Aircraft and Helicopter,Oscillating Bearing MIL−G−25537 N/A AR X
28-10-00-209 28−21−16−720−801 Functional Test of the Fuel-Feed Line Shrouds. 96 M 5-21-10 160, 170, 310,412, 422 163AZ, 164AZ,241ALF, BLF,CLF, DLF, ELF,FLF,
242CRF,DRF, ERF,FRF, 412BB,DB, 422BB, DB 05−035 Leak Detector, Fuel System A−A−59110 N/A AR X

INGENIERÍA DE PLANEACIÓN ASC 1 de 6

 FORMATO DE PARTES Y HERRAMIENTAS
CHALLENGER 605

TLMC TOOLS AND

Chapter 5 Task No. AMTOSS/NDT No. Task Title Task Interval Zone Access REFERENCE DESIGNATION PART NUMBER CAGE Code QTY SUPPLIES SPARE
Section EQUIPMENT

28-10-00-209 28−21−16−720−801 Functional Test of the Fuel-Feed Line Shrouds. 96 M 5-21-10 160, 170, 310,412, 422 163AZ, 164AZ,241ALF, BLF,CLF, DLF, ELF,FLF,
242CRF,DRF, ERF,FRF, 412BB,DB, 422BB, DB GSE 28−10−04 KIT - EXTERNAL SHROUD DRAIN G600−280008−1 88308 1 X
28-10-00-209 28−21−16−720−801 Functional Test of the Fuel-Feed Line Shrouds. 96 M 5-21-10 160, 170, 310,412, 422 163AZ, 164AZ,241ALF, BLF,CLF, DLF, ELF,FLF,
242CRF,DRF, ERF,FRF, 412BB,DB, 422BB, DB Commercially Available Air Test Stand N/A N/A 1 X
28-10-00-209 28−21−16−720−801 Functional Test of the Fuel-Feed Line Shrouds. 96 M 5-21-10 160, 170, 310,412, 422 163AZ, 164AZ,241ALF, BLF,CLF, DLF, ELF,FLF,
242CRF,DRF, ERF,FRF, 412BB,DB, 422BB, DB Commercially Available Plug, Shroud Drain N/A N/A 1 X
28-10-00-210 28−12−10−720−802 Functional Test of the Forward and Aft Auxiliary Tanks - Interspace and Fuel Transfer Line 96 M 5-21-10 163, 191, 192,221, 231, 241 191BB, 192BB
Shrouds. GSE 28−10−04 KIT - EXTERNAL SHROUD DRAIN G600−280008−1 88308 1 X
28-10-00-210 28−12−10−720−802 Functional Test of the Forward and Aft Auxiliary Tanks - Interspace and Fuel Transfer Line 96 M 5-21-10 163, 191, 192,221, 231, 241 191BB, 192BB
Shrouds. Commercially Available Air Test Stand N/A N/A 1 X
28-10-00-210 28−12−10−720−802 Functional Test of the Forward and Aft Auxiliary Tanks - Interspace and Fuel Transfer Line 96 M 5-21-10 163, 191, 192,221, 231, 241 191BB, 192BB
Shrouds. Commercially Available Plug, Shroud Drain N/A N/A 1 X
28-10-00-210 28−12−10−720−802 Functional Test of the Forward and Aft Auxiliary Tanks - Interspace and Fuel Transfer Line 96 M 5-21-10 163, 191, 192,221, 231, 241 191BB, 192BB
Shrouds. 05−035 Leak Detector, Fuel System A−A−59110 N/A AR X
28-20-00-202 28−11−19−710−801 Operational Test of the Collector-Tank Check Valve. 96 M 5-21-10 222, 311 311BB GSE 28−12−01 KIT - FUEL FLOW FUNCTIONAL CHECK G600−280009−99 88308 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Dedicated Sensors (Post SB 605-31- 96 M 5-21-10 351 311BB
001). GSE 20−00−04 INCLINOMETER - DIGITAL PRO 3600 63848 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Dedicated Sensors (Post SB 605-31- 96 M 5-21-10 351 311BB ADAPTER - HEADSET (CONNECTOR U-92A/U TO PJ-055B/PJ-
001). GSE 23−00−03 068) 18253G05 71483 2 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Dedicated Sensors (Post SB 605-31- 96 M 5-21-10 351 311BB
001). GSE 27−00−15 KIT - CONTROL WHEEL/COLUMN RIGGING G600−270033−149 88308 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Dedicated Sensors (Post SB 605-31- 96 M 5-21-10 351 311BB
001). GSE 31−30−03 ROSE ANALYSIS UNIT (STANDARD) 17TES0055 6141 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Dedicated Sensors (Post SB 605-31- 96 M 5-21-10 351 311BB
001). Commercially Available Parallel Cable N/A N/A 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Dedicated Sensors (Post SB 605-31- 96 M 5-21-10 351 311BB
001). Commercially Available Signal Generator (200CD or equivalent) N/A N/A 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
GSE 20−00−03 GAUGE - FORCE (0 TO 100 LB (0 TO 45.36 KG)) LG−100 35986 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
GSE 20−00−04 Inclinometer Digital PRO 3600 63848 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
GSE 27−00−02 Kit − Rigging Pins G600−270001−69 88308 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
GSE 27−00−15 Kit − Control Wheel/Column Rigging G600−270033−149 88308 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
GSE 31−30−03 ROSE Analysis Unit (RAU) 17TES0055 6141 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
GSE 32−43−02 FIXTURE - BRAKE PEDAL PRESSURE TEST G600−320026−123 88308 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
Commercially Available Floppy Disk N/A N/A 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
Commercially Available Wrench − Torque, 35 lbf in (3.95 Nm) N/A N/A 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
Commercially Available Meter, Cable Tension N/A N/A 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
Commercially Available Glasses, Safety N/A N/A 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB MIL−PRF−16173, Grade 2,
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001. Braycote 137 LPS−3 No−rust
27 Petrotect 2 Steelgard MS−
04−020 Lubricant, Anti−Corrosion 10 N/A AR X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
05−004 Lockwire, Cres 0.020 in. (0.51 mm) MS20995C20 N/A AR X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
05−005 Lockwire, Cres 0.032 in. (0.81 mm) MS20995C32 N/A AR X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
05−006 Lockwire, Cres 0.041 in. (01.04 mm) MS20995C41 N/A AR X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
Commercially Available Wrench, Torque 20 to 25 lbf in (2.26 to 2.82 Nm) N/A N/A 1 X
28-20-00-202 31−31−01−720−801 Functional Test of the Flight Data Recorder (FDR) Force Sensors (Post SB 605-31-001). 96 M 5-21-10 351 311BB
NOTE: The 96 month task interval starts at the incorporation date of SB 605-31-001.
GSE 31−31−01 CFMS RVDT BOB G604−313101−1 88308 1 X
32-00-01-211 32−34−28−220−805 Detailed Inspection of the Landing-Gear Emergency-Extension Cable in the Mid-Lower 96 M 5-21-10 160 231ELF, FLF,HLF
Fuselage Compartment.
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−30−04 KIT - MLG SIDE STAY PIN EXTRACTION G600−323001−1 88308 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 MIL−PRF−23827 (Type II)
Aeroshell Grease 7
Grease, Aircraft and Instrument, Castrol Aeroplex AI
04−014 Gear and Actuator Screw 5114 EP Grease N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−001 Cloth, Cleaner, Low−Lint A−A−59323A N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Mastinox 6856K or CA 1000
05−167 Compound, Corrosion Inhibitor Type I N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 AC−370 B−1/2, B−2
3M
PR−1776M B−1/2, B−2
06−013 Sealant, Fuel Tank, Lightweight PRC−Desoto N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 AMS3160 P−D−680 (Type II) or
Solvent to Dry−Clean and Remove MIL−PRF−680 (Type II)
07−002 Grease (QPL−680−1) N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−00−01 DOLLY - MLG AND NLG REMOVAL/INSTALLATION G604−320001−1 N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−10−03 EXTRACTOR - MLG PINTLE PIN G600−320004−201 88308 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−10−19 KIT - MLG PINTLE AND ACTUATOR NUT REMOVAL G601−320001−149 88308 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Container, Hydraulic Fluid N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 20 to 25 lbf in (2.26 to 2.82 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 20 to 40 lbf ft (27.12 to 54.23 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 20 to 150 lbf ft (27.12 to
Commercially Available 203.37 Nm) N/A N/A 1 X

INGENIERÍA DE PLANEACIÓN ASC 2 de 6

 FORMATO DE PARTES Y HERRAMIENTAS
CHALLENGER 605

TLMC TOOLS AND

Chapter 5 Task No. AMTOSS/NDT No. Task Title Task Interval Zone Access REFERENCE DESIGNATION PART NUMBER CAGE Code QTY SUPPLIES SPARE
Section EQUIPMENT

32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 MIL−PRF−23827 (Type I)
04−014A Grease Aeroshell Grease 33 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−005 Lockwire, CRES 0.032 in. (0.81 mm) MS20995C32 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Compound, Corrosion Inhibitor,
05−175 Non−Chromate CA 1000 Type I N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 80 to 100 lbf in (9.04 to 11.29 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 133 to 147 lbf in (15.03 to
Commercially Available 16.60 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−43−01 Kit − Brake Bleed Hose G600−320025−11 88308 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Cup, Measuring N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Torque Wrench, 23 to 27 lbf in (2.60 to 3.05 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Torque Wrench, 65 to 70 lbf in (7.35 to 7.90 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Skydrol LD−4
Skydrol 500B−4
Chevron HYJET IV
Chevron HYJET IV A
Fluid, Hydraulic, Phosphate Ester Chevron HYJET IV−A Plus
02−001 Base, Fire−Resistant SAE AS1241C N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−005 Lockwire, CRES 0.032 in. (0.81 mm) MS20995C32 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 07−10−04 Jack − Main Gear Axle (12 tons (10.886 kg)) 02−7813C0100 N/A 2 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 12−20−02 Kit − Tire Servicing 14−6830−6010 59603 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 12−30−05 Tool − Deflation 2755 27783 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−40−04 Socket − MLG Axle Nut (2.25 in (57.55 mm)) LDH722 9698 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−43−05 Tool − Rotor Centering G604−324305−1 88308 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 10 to 12 lbf in (1.13 to 1.35 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 20 to 25 lbf in (2.26 to 2.82 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 15 lbf ft (20.34 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 30 lbf ft (40.68 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Mobile Aviation Grease
04−009A Grease, Aircraft, Wheel Bearing SHC100 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Grease, Aircraft, General Purpose,
04−010 Wide Temperature Range MIL−PRF−81322 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−005 Lockwire, CRES 0.032 in. (0.81mm) MS20995C32 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−163 Compound, Corrosion Inhibitor Mastinox D40 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 50 to 55 lbf ft (67.80 to 74.56 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Skydrol LD−4
Skydrol 500B−4
Chevron HYJET IV
Chevron HYJET IV A
Fluid, Hydraulic, Phosphate Ester Chevron HYJET IV−A Plus
02−001 Base, Fire−Resistant SAE AS1241C N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 MIL−PRF−81322
Aeroshell Grease 22
Mobil Grease 28
Royco 22C
Grease, Aircraft, General Purpose, Royco 22D
04−009 Wide Temperature range Chevron W−T N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−005 Lockwire, CRES 0.032 in. (0.81mm) MS20995C32 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Unit − Phosphate Ester Base Hydraulic Fluid (5 U.S.
GSE 12−10−05 GAL (18.927 L)) PF53467−6P 94861 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 12−10−17 Unit − MIL−PRF−5606 (5.0 U.S. GAL (18.927 L)).) PF53481−22PWS 94861 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 12−20−03 Kit − Strut Servicing (Air/Nitrogen) 14−6805−6010 59603 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Bottle, High Pressure Nitrogen N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Container, Fluid, Minimum Capacity 1 U.S. Gallon
Commercially Available (3.78 L) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Gauge, Pressure N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Hose, Transparent Plastic (Flexible) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Scale, Measuring N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 50 to 70 lbf in (5.65 to 7.90 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 02−002 Fluid, Hydraulic, Petroleum Base MIL−PRF−5606 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 02−002A Fluid, Landing Gear Aeroshell N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−001 Cloth, Cleaner, Low−lint A−A−59323A N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 05−101 Nitrogen Gas A−A−59503, Type I, Grade A N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Grease Gun (Non−pneumatic) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Grease, Aircraft, General Purpose,
04−010 Wide Temperature Range MIL−PRF−81322 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 AMS3160
P−D−680 (Type II) or
Solvent to Dry−Clean and Remove MIL−PRF−680 (Type II)
07−002 Grease (AMS 3160) (QPL−680−1) N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Stopwatch N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 GSE 32−61−01 Target − Proximity Sensor N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Gauge, Force 5 lbf (22.24 N) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 50 to 60 lbf in (5.65 to 6.77 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 04−038A Compound, Corrosion Preventive MIL−PRF−16173 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 50 to 60 lbf in (5.65 to 6.77 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 100 to 120 lbf in (11.30 to
Commercially Available 13.55 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 04−031 Lubricant, Anti−Corrosion MIL−PRF−16173 Grade 4 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Seal and coat Compound or
Non−Chromated Pressure and MIL−PRF−81733 Type II (P/S
06−019 Environmental Sealant 870B) or MC−780 B−1/2, B−2 N/A AR X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Torque Wrench, 50 to 75 lbf in (5.65 to 8.47 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 10 to 15 lbf in (1.13 to 1.69 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 36 to 44 lbf in (4.07 to 4.97 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 135 to 145 lbf in (15.26 to
Commercially Available 16.38 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 24 to 36 lbf in (2.71 to 4.06 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 110 to 120 lbf in (12.43 to
Commercially Available 13.55 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 162 to 179 lbf in (18.31 to
Commercially Available 20.22 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 20 to 40 lbf ft (27.12 to 54.23 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 22.17 to 24.50 lbf ft (30.06 to
Commercially Available 33.21 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 30 to 100 lbf ft (40.67 to
Commercially Available 135.58 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 66 to 83 lbf ft (89.49 to 112.53 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Commercially Available Wrench, Torque 18 lbf in (2.03 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 133 to 147 lbf in (15.03 to
Commercially Available 16.60 Nm) N/A N/A 1 X

INGENIERÍA DE PLANEACIÓN ASC 3 de 6

 FORMATO DE PARTES Y HERRAMIENTAS
CHALLENGER 605

TLMC TOOLS AND

Chapter 5 Task No. AMTOSS/NDT No. Task Title Task Interval Zone Access REFERENCE DESIGNATION PART NUMBER CAGE Code QTY SUPPLIES SPARE
Section EQUIPMENT

32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 162 to 179 lbf in (18.31 to
Commercially Available 20.22 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 180 to 199 lbf in (20.34 to
Commercially Available 22.48 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 21.42 to 23.66 lbf ft (29.04 to
Commercially Available 32.08 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 22.17 to 24.50 lbf ft (30.06 to
Commercially Available 33.21 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Wrench, Torque 39.58 to 43.75 lbf ft (53.66 to
Commercially Available 59.31 Nm) N/A N/A 1 X
32-00-01-215 32−11−00−220−801 Detailed Inspection of the Main Landing Gear (MLG) Assembly. 96 M 5-21-10 730, 740 Compound, Leak Detection, Oxygen MIL−PRF−25567 Type I and
05−188 Systems Type II N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 04−014 Grease, Aircraft and Instrument,Gear and Actuator Screw MIL−PRF−23827 (Type II)Aeroshell Grease 7 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 05−001 Cloth, Cleaner, Low−Lint A−A−59323A N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 07−002 Solvent to Dry−Clean and RemoveGrease AMS3160 P−D−680 (Type II) orMIL−PRF−680 (Type
N/AII)(QPL−680−1)AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 32−00−01 Dolly − MLG and NLG Removal/Installation G604−320001−1 88308 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 32−21−01 Extractor − NLG Pivot Pin 460004588 35962 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 50 to 70 lbf in (5.65 to 7.91 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 10 to 20 lbf in (1.13 to 2.25 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 20 to 30 lbf in (2.26 to 3.38 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 25 to 30 lbf in (2.83 to 3.38 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 29 to 31 lbf ft (39.4 to 42.0 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 04−014A Grease MIL−PRF−23827 (Type I),Aeroshell 33 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 05−004 Lockwire MS20995C20 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 12−20−02 Kit − Tire Service 14−6830−6010 59603 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 12−30−05 Tool − Deflation 2755 27783 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 32−40−03 Socket − NLGAxle Nut (1.75 in (44.45 mm)) LDH562 9698 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 20 to 25 lbf in (2.26 to 2.82 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 110 lbf in (12.42 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 220 lbf in (24.85 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 04−009A Grease, Aircraft, Wheel Bearing Mobile Aviation GreaseSHC100 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 04−010 Grease, Aircraft, General Purpose,Wide Temperature Range MIL−PRF−81322 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 05−005 Lockwire, CRES 0.032 in. (0.81mm) MS20995C32 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 10−10−27 Cable−Drop Down Door (FWD) G600−100026−43 88308 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 12−10−05 Unit − Phosphate Ester Base Hydraulic Fluid (5 U.S.GAL (18.927 L))PF53467−6P 94861 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 12−10−17 Unit − MIL−PRF−5606 (5.0 U.S. GAL (18.927 L)).) PF53481−22PWS 94861 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 12−20−03 Kit − Strut Servicing (Air/Nitrogen) 14−6805−6010 59603 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Bottle, High Pressure Nitrogen N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Container, Fluid, Minimum Capacity 1 U.S. Gallon(3.78 L) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Gauge, Pressure N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Hose, Transparent Plastic (Flexible) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Scale, Measuring N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 50 to 70 lbf in (5.65 to 7.90 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 02−002 Fluid, Hydraulic, Petroleum Base MIL−PRF−5606 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 02−002A Fluid,Landing Gear Aeroshell N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 05−001 Cloth, Cleaner, Low−lint A−A−59323A N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 05−101 Nitrogen Gas A−A−59503, Type I,Grade A N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Grease Gun (Non−Pneumatic) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 07−002 Solvent to Dry−Clean and RemoveGrease AMS3160P−D−680 (Type II) orMIL−PRF−680 (Type
N/AII)(AMS 3160) (QPL−680−1)
AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 12−00−04 Kit − Hydraulic Ground Service Couplings G600−120005−1 88308 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Filler − Phosphate Ester Base Hydraulic Fluid (1
GSE 12−10−08 quart (0.946 L)) WF174410−17 94861 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 29−00−02 Power Unit − Hydraulic 52300EIZCM 59603 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Torque Wrench, 50 to 70 lbf in (5.65 to 7.90 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Gauge, Force 5 lbf (22.24 N) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Plates, Metal N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 06−105 Compound, Chromate Mastinox D40 N/A AR X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Extractor, Screw 0.190−32−UNF N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 Commercially Available Wrench, Torque 50 to 70 lbf in (5.65 to 7.90 Nm) N/A N/A 1 X
32-00-01-216 32−21−01−220−802 Detailed Inspection of the Nose Landing Gear (NLG) Assembly. 96 M 5-21-10 710 GSE 32−21−02 Assembly Sleeve − NLG Tube/Main Fitting 460004576 35962 1 X
32-12-00-201 32−12−01−220−801 Detailed Inspection of the Hinge and Fasteners of the Main Landing-Gear Door. T 96 M R 48 M 5-22-10 542, 642, 732,742

52-ZL-00-208 52−21−01−210−801 General Visual Inspection of the Overwing Emergency-Exit Door - External. 96 M 5-23-10 841 841AR, 843BZ Commercially Available Specialized Spray Gun N/A N/A 1 X
52-ZL-00-208 52−21−01−210−801 General Visual Inspection of the Overwing Emergency-Exit Door - External. 96 M 5-23-10 841 841AR, 843BZ Compound, Corrosion Inhibiting
04−039 (Penetrating) BAMS 565−006, Type 1 N/A AR X
52-ZL-00-208 52−21−01−210−801 General Visual Inspection of the Overwing Emergency-Exit Door - External. 96 M 5-23-10 841 841AR, 843BZ Brush, Paint, Natural or Synthetic
05−033 Bristle Commercially Available N/A AR X
52-11-00-203 52−11−01−220−803 Detailed Inspection of the Internal Structure of the Passenger Door. T 96 M R 96 M 5-22-10 832 832AL, AR, AT,BL, BR, BT, CL,CR, CT, DR,DT, EL, ET,
FL,FT, GL, GT, HL Commercially Available Specialized Spray Gun N/A N/A 1 X
52-11-00-203 52−11−01−220−803 Detailed Inspection of the Internal Structure of the Passenger Door. T 96 M R 96 M 5-22-10 832 832AL, AR, AT,BL, BR, BT, CL,CR, CT, DR,DT, EL, ET, Compound, Corrosion Inhibiting
FL,FT, GL, GT, HL 04−039 (Penetrating) BAMS 565−006, Type 1 N/A AR X
52-21-00-203 52−21−01−220−803 Detailed Inspection of the Internal Structure of the Overwing Emergency-Exit Door. T 96 M R 48 M 5-22-10 841 843AZ
Commercially Available Specialized Spray Gun N/A N/A 1 X
52-21-00-203 52−21−01−220−803 Detailed Inspection of the Internal Structure of the Overwing Emergency-Exit Door. T 96 M R 48 M 5-22-10 841 843AZ Compound, Corrosion Inhibiting
04−039 (Penetrating) BAMS 565−006, Type 1 N/A AR X
52-21-00-203 52−21−01−220−803 Detailed Inspection of the Internal Structure of the Overwing Emergency-Exit Door. T 96 M R 48 M 5-22-10 841 843AZ Brush, Paint, Natural or Synthetic
05−033 Bristle Commercially Available N/A AR X
52-31-00-202 52−31−01−220−802 Detailed Inspection of the Stop Fittings of the Cargo Compartment Door. T 96 M R 48 M 5-22-10 834 834CZ
52-31-00-203 52−31−01−220−803 Detailed Inspection of the Internal Structure of the Cargo Compartment Door. T 96 M R 96 M 5-22-10 834 834CZ Commercially Available Specialized Spray Gun N/A N/A 1 X
52-31-00-203 52−31−01−220−803 Detailed Inspection of the Internal Structure of the Cargo Compartment Door. T 96 M R 96 M 5-22-10 834 834CZ 04−039 Compound, Corrosion Inhibiting(Penetrating) BAMS 565−006,Type 1 N/A AR X
52-31-00-203 52−31−01−220−803 Detailed Inspection of the Internal Structure of the Cargo Compartment Door. T 96 M R 96 M 5-22-10 834 834CZ 05−033 Brush, Paint, Natural or SyntheticBristle Commercially Available N/A AR X
53−ZL−00−203 53−10−01−210−803 General Visual Inspection of the Nose Compartment − Lower External. 96 M 5−23−10 121, 122 122BR N/A N/A N/A N/A N/A
53−ZL−00−204 53−10−01−210−804 General Visual Inspection of the Nose Compartment − Lower Internal LH. 96 M 5−23−10 121 121AL N/A N/A N/A N/A N/A
53−ZL−00−207 53−10−01−210−807 General Visual Inspection of the Forward Avionics and Flight Controls Compartment − 96 M 5−23−10 131, 132 N/A N/A N/A N/A N/A N/A
External.
53−ZL−00−213 53−20−01−210−804 General Visual Inspection of the Lower Surface of the Pressure−Floor from FS409 to 96 M 5−23−10 161, 162 161CL, DL, EL, FL 162CL, DL, EL, FL 163AZ 164AZ N/A N/A N/A N/A N/A
FS559.
53−ZL−00−215 53−20−01−210−806 General Visual Inspection of the Mid−Fuselage between the Pressure Floor and the Cabin 96 M 5−23−10 165 231CLF, DLF, FLF, GLF, HLF, JLF, KLF, MLF, NLF, PLF, N/A N/A N/A N/A N/A
Floor − Lower Internal. QLF, 232FRF, GRF, HRF, JRF, KRF, MRF, NRF, PRF,
QRF
53−ZL−00−216 53−30−01−210−801 General Visual Inspection of the Aft Compartment and Aft Wing−to−Fuselage Fairing − 96 M 5−23−10 171, 172, 195, 196 191AL, 192AR, 195AB N/A N/A N/A N/A N/A
External.
53−ZL−00−218 53−10−01−210−809 General Visual Inspection of the Forward Equipment Compartment − External. 96 M 5−23−10 211, 212 N/A N/A N/A N/A N/A N/A
53−ZL−00−222 53−20−01−210−807 General Visual Inspection of the Passenger Compartment − External. 96 M 5−23−10 231, 232 N/A N/A N/A N/A N/A N/A
53−ZL−00−224 53−30−01−210−803 General Visual Inspection of the Cargo Compartment − External. 96 M 5−23−10 241, 242 N/A N/A N/A N/A N/A N/A
53−ZL−00−225 53−30−01−210−807 General Visual Inspection of the Cargo Compartment − Internal without Removal of the 96 M 5−23−10 241, 242 834AL N/A N/A N/A N/A N/A
Headliner.
53−ZL−00−229 53−43−01−210−801 General Visual Inspection of the Fuselage/Stabilizer Section − External 96 M 5−23−10 351, 352 N/A N/A N/A N/A N/A N/A
53−ZL−00−233 53−20−01−210−809 General Visual Inspection of the Mid−Fuselage Compartment − Lower Internal (FS559.0 96 M 5−23−10 171, 172 241ALF, BLF, CLF, DLF, ELF, FLF, 242CRF, DRF, ERF N/A N/A N/A N/A N/A
to FS621.0).

INGENIERÍA DE PLANEACIÓN ASC 4 de 6

 FORMATO DE PARTES Y HERRAMIENTAS
CHALLENGER 605

TLMC TOOLS AND

Chapter 5 Task No. AMTOSS/NDT No. Task Title Task Interval Zone Access REFERENCE DESIGNATION PART NUMBER CAGE Code QTY SUPPLIES SPARE
Section EQUIPMENT

53−10−00−201 53−10−01−220−801 Detailed Inspection of the Internal Fuselage, Frames and Forward Bulkhead − FS169.00 to T 96 M R 48 M 5−22−10 111, 121, 122, 211, 212 121AL, 122AR,211AL, 212AR N/A N/A N/A N/A N/A
FS202.75.
53−10−00−203 53−10−01−220−803 Detailed Inspection of the Internal Fuselage (Skins and Structure) − FS202.75 to FS280.00 T 96 M R 48 M 5−22−10 131, 132, 221, 222 131AL, 132AR, 221CZ, DZ, FZ, 222CZ, DZ, FZ 04−039 Compound, Corrosion Inhibiting N/A N/A 1 X
Below the Floor.
53−10−00−208 53−10−01−220−807 Detailed Inspection of the Beams, Crossmembers and Panels of the Floor Structure − T 96 M R 48 M 5−22−10 131, 132, 221, 222 131AL, 132AR, 221AL, 212AR, 221AZ, BZ, CZ, DZ, EZ, GSE 10−10−30 Protector − ADG Blade N/A N/A 1 X
FS169 to FS280. 222AZ, BZ, CZ, DZ, EZ
53−10−00−210 53−10−01−220−809 Detailed Inspection of the Forward Jacking Point − FS278. T 96 M R 48 M 5−22−10 131, 132 141ALF N/A N/A N/A N/A N/A
53−20−00−201 53−20−01−220−801 Detailed Inspection of the Sills, Frames and External Skin around the Passenger Door T 96 M R 48 M 5−22−10 141, 231 231LLF N/A N/A N/A N/A N/A
Cutout.
53−20−00−203 53−20−01−220−803 Detailed Inspection of the Floor Support Structure − FS280 to FS409, as Visible with the T 96 M R 48 M 5−22−10 141, 142 221CLF N/A N/A N/A N/A N/A
Floor Panels Installed.
53−20−00−204 53−20−01−220−830 Detailed Inspection of the Floor Support Structure − FS280 to FS409. T 96 M R 96 M 5−22−10 141, 142 231ALF, BLF, CLF, ELF, FLF, GLF, LLF, MLF, NLF, N/A N/A N/A N/A N/A
232ERF, FRF, GRF, LRF, MRF, NRF
53−20−00−206 53−20−01−220−805 Detailed Inspection of the Lower Internal Skin and Fuselage Structure − FS280 to FS409, T 96 M R 48 M 5−22−10 141, 142 221CLF N/A N/A N/A N/A N/A
as Visible with the Floor Panels Installed.
53−20−00−207 53−20−01−220−861 Detailed Inspection of the Internal Mid−Fuselage (Skin and Structure, FS409.00 Bulkhead T 96 M R 96 M 5−22−10 141, 142 141ALF, BLF, 221CLF, 231ALF, BLF, CLF, ELF, FLF, GSE 28−10−08 Kit − Video PAC Borescope N/A N/A 1 X
Forward Face and the External Surfaces of the Forward−Auxiliary Fuel Tank) − FS280.00 GLF, MLF, 232FRF, GRF, MRF, NRF
to FS409.00 Below the Floor.
53−20−00−210 53−20−01−220−808 Detailed Inspection of the Internal Forward Keel Beam − FS364 to FS394. T 96 M R 96 M 5−22−10 141, 142 221CLF GSE 28−10−08 Kit − Video PAC Borescope N/A N/A 1 X
53−20−00−211 53−20−01−220−809 Detailed Inspection of the Forward Keel Beam Pressure Box and Keel Beam Lugs and T 96 M R 96 M 5−22−10 141, 142 191AB N/A N/A N/A N/A N/A
Links − FS394 to FS409.
53−20−00−216 53−20−01−220−814 Detailed Inspection of the Aft Face of the Frame below the Floor −FS409. T 96 M R 96 M 5−22−10 161, 162 191AB, 191BB, 192BB Commercially Available Flexible Boroscope N/A N/A 1 X
53−20−00−217 53−20−01−220−815 Detailed Inspection of the Sills, Frames and External Skin around the Emergency−Exit T 96 M R 96 M 5−22−10 232 841AR N/A N/A N/A N/A N/A
Door Cutout.
53−20−00−218 53−20−01−220−816 Detailed Inspection of the Fittings of the Emergency−Exit Door. T 96 M R 48 M 5−22−10 232 841AR N/A N/A N/A N/A N/A
53−20−00−220 53−20−01−220−818 Detailed Inspection of the Floor Sill Area Over the Wing Box − FS409 to FS559. T 96 M R 48 M 5−22−10 231, 232 161BL, DL, EL, FL, 162CR, DR, EL, FL, 163AZ, 164AZ N/A N/A N/A N/A N/A

53−20−00−221 53−20−01−220−819 Detailed Inspection of the Wing−to−Fuselage Attachment Lug − FS424. T 96 M R 96 M 5−22−10 161, 162 161BL, 162CR N/A N/A N/A N/A N/A
53−20−00−222 53−20−01−220−820 Detailed Inspection of the Wing−to−Fuselage Attachment Lug − FS473.15. T 96 M R 96 M 5−22−10 161, 162 161EL, 162EL N/A N/A N/A N/A N/A
53−20−00−223 53−20−01−220−821 Detailed Inspection of the Frame below the Floor − FS513. T 96 M R 96 M 5−22−10 165 161FL, 162FL, 163AZ, 164AZ N/A N/A N/A N/A N/A
53−20−00−224 53−20−01−220−822 Detailed Inspection of Wing−to−Fuselage Attachment Link − FS513. T 96 M R 48 M 5−22−10 161, 162 161FL, 162FL N/A N/A N/A N/A N/A
53−20−00−225 53−20−01−220−823 Detailed Inspection of the Wing−to−Floor Tie Beam − FS460. T 96 M R 96 M 5−22−10 165 161EL, 162EL, 163AZ, 164AZ N/A N/A N/A N/A N/A
53−20−00−226 53−20−01−220−824 Detailed Inspection of the Upper Surface of the Pressure Floor Skin Panel − FS409 to T 96 M R 48 M 5−22−10 165 231FLF, GLF, HLF, JLF, KLF, MLF, NLF, PLF, QLF, N/A N/A N/A N/A N/A
FS559 and BL36L to BL36R. 232FRF, GRF, HRF, JRF, KRF, MRF, NRF, PRF, QRF

53−20−00−227 53−20−01−220−825 Detailed Inspection of the Lower Surface of the Pressure Floor Skin Panel − FS409 to T 96 M R 48 M 5−22−10 161, 162 161EL, 162EL, 163AZ, 164AZ N/A N/A N/A N/A N/A
FS559 and BL36L to BL36R.
53−20−00−228 53−20−01−220−826 Detailed Inspection of the Pressure Floor Support Beams − FS409 to FS559, BL0.0, BL9, T 96 M R 96 M 5−22−10 165 231FLF, GLF, HLF, JLF, KLF, MLF, NLF, PLF, QLF, N/A N/A N/A N/A N/A
BL18.6, BL27 and BL35.4. 232FRF, GRF, HRF, JRF, KRF, MRF, NRF, PRF, QRF

53−20−00−229 53−20−01−220−827 Detailed Inspection of the Underfloor Longeron Assembly − FS409 to FS559. T 96 M R 96 M 5−22−10 231, 232 161BL, DL, EL, FL, 162CR, DR, EL, FL, 163AZ, 164AZ N/A N/A N/A N/A N/A

53−20−00−230 53−20−01−220−828 Detailed Inspection of the MLG Uplock Structure − FS513 to FS559 below WL73 (LH and T 96 M R 96 M 5−22−10 163, 164 163AZ, 164AZ N/A N/A N/A N/A N/A
RH).
53−20−00−232 53−20−01−220−863 Detailed Inspection of the Internal Surfaces of the Forward Auxiliary Tank. T 96 M R 96 M 5−22−10 141, 142 231BLF, CLF, FLF, GLF, MLF, 232FRF, GRF, MRF N/A N/A N/A N/A N/A
53−30−00−201 53−30−01−220−801 Detailed Inspection of the Aft Face of the Pressure Bulkhead below the Floor − FS559. T 96 M R 48 M 5−22−10 171, 172 241ALF, CLF, ELF, 242CRF, ERF N/A N/A N/A N/A N/A

53−30−00−202 53−30−01−220−802 Detailed Inspection of the Forward Face of the Pressure Bulkhead below the Floor − T 96 M R 48 M 5−22−10 163, 164, 165 163AZ, 164AZ N/A N/A N/A N/A N/A
FS559.
53−30−00−203 53−30−01−220−803 Detailed Inspection of the Aft Face of the Rear Pressure Bulkhead − FS621. T 96 M R 48 M 5−22−10 311, 312 311BB N/A N/A N/A N/A N/A
53−30−00−204 53−30−01−220−804 Detailed Inspection of the Stabilizer Drag Angles − FS700 to FS820, and Stringer 2L and T 96 M R 96 M 5−22−10 311, 312, 323, 325, 351, 352, 361, N/A N/A N/A N/A N/A N/A
2R. 362
53−30−00−206 53−30−01−220−806 Detailed Inspection of the Profile Plates of the Floor Support Structure − FS559 to FS621. T 96 M R 96 M 5−22−10 171, 172 241ALF, BLF, CLF, DLF, ELF, FLF, 242CRF, DRF, ERF, N/A N/A N/A N/A N/A
FRF
53−30−00−208 53−30−01−220−807 Detailed Inspection of the Engine Support Beam Structure. T 96 M R 96 M 5−22−10 311, 312 311BB N/A N/A N/A N/A N/A
53−30−00−209 53−30−01−220−852 Detailed Inspection of the Internal Aft Fuselage (Skin and Structure, FS621.00 Bulkhead T 96 M R 96 M 5−22−10 171, 172 241ALF, BLF, CLF, DLF, ELF, FLF, 242CRF, DRF, ERF, GSE 28−10−08 Kit − Video PAC Borescope N/A N/A 1 X
Forward Face and the External Surfaces of the Aft−Auxiliary Fuel Tank) − FS559.00 to FRF
FS621.00 Below the Floor.
53−30−00−211 53−30−01−220−810 Detailed Inspection of the Track Supports near, and the Sills and Frames around, the T 96 M R 48 M 5−22−10 171, 172, 241, 242 241FLF N/A N/A N/A N/A N/A
Cargo Compartment Door Cutout.
53−30−00−213 53−30−01−220−812 Detailed Inspection of the Fittings of the Cargo Compartment Door. T 96 M R 48 M 5−22−10 241, 242 N/A N/A N/A N/A N/A N/A
53−30−00−216 53−30−01−220−816 Detailed Inspection of the Forward Face of the Frame − FS755. T 96 M R 48 M 5−22−10 311, 312 311BB N/A N/A N/A N/A N/A
53−30−00−219 53−30−01−220−819 Detailed Inspection of the External Side Skin Panels of the Fuselage − FS559 to FS755 and T 96 M R 96 M 5−22−10 171, 172, 241, 242, 311, 312 412AB, BB, CB, 413BB, 422AB, BB, CB, 423BB N/A N/A N/A N/A N/A
Stringer 6L to 20L and 6R to 20R Covered by Pylon.
53−30−00−222 53−30−01−220−850 Detailed Inspection of the Internal Skin and Structure of the Aft Auxiliary Tank. T 96 M R 96 M 5−22−10 171, 172 241ALF, BLF, CLF, DLF, ELF, FLF, 242CRF, DRF, ERF, N/A N/A N/A N/A N/A
FRF
53−30−00−223 ET−53−30−012 Special Detailed Inspection of the Skin and Fuselage Structure − FS718.00 to FS755.00. T 96 M R 96 M 5−22−10 N/A N/A BA CRS ET−55C−3 Calibration Reference Standard (CRS) made from aluminum N/A N/A 1 X
alloy (35−45% IACS) containing chemically milled steps

53−43−00−202 53−43−02−220−801 Detailed Inspection of the Aft Face of the Frame − VS67.5% . T 96 M R 48 M 5−22−10 361, 362 311BB Commercially Available Borescope−flexible type, 6 mm (0.236 in.) dia. max, 1 m (39.370 N/A N/A 1 X
in.) long min.
53−43−00−203 53−43−02−220−802 Detailed Inspection of the Internal Skin and Fuselage Structure − FS755 to VS67.5%. T 96 M R 48 M 5−22−10 351, 352 311BB N/A N/A N/A N/A N/A

53−50−00−201 53−66−01−220−801 Detailed Inspection of the Internal Skin and Structure of the Tail Tank. T 96 M R 96 M 5−22−10 361, 362 361AT, BB, BZ, BLZ, BRZ N/A N/A N/A N/A N/A
53−50−00−202 53−66−01−220−802 Detailed Inspection of the Floor Structure of the Tail Tank. T 96 M R 96 M 5−22−10 361, 362 363AB N/A N/A N/A N/A N/A
53−50−00−203 53−66−01−220−803 Detailed Inspection of the Forward Face of the Fuel Tail Tank Forward Bulkhead. T 96 M R 96 M 5−22−10 361, 362 311BB Commercially Available Borescope−flexible type, 6 mm (0.236 in.) dia. max, 1 m (39.370 in.)
N/Along min. N/A 1 X

53−50−00−204 53−66−01−220−804 Detailed Inspection of the Aft Face of the Tail Tank Aft Bulkhead. T 96 M R 96 M 5−22−10 361, 362 363BB N/A N/A N/A N/A N/A
54−ZL−00−207 54−62−04−210−801 General Visual Inspection of the Pylon Trailing Edge − Internal LH. 96 M 5−23−10 413 413AL, BB, CB N/A N/A N/A N/A N/A
54−50−00−201 54−50−01−220−801 Detailed Inspection of the Forward Engine−Mount Spar Assembly. T 96 M R 96 M 5−22−10 410, 420 412AT, 422AT N/A N/A N/A N/A N/A
54−50−00−203 54−50−01−220−803 Detailed Inspection of the Internal Structure of the Pylon. T 96 M R 96 M 5−22−10 410, 420 412AB, AT, BB, BT, CT, 422AB, AT, BB, BT, CT N/A N/A N/A N/A N/A
54−50−00−204 54−50−01−220−804 Detailed Inspection of the Aft Engine−Mount Support Structure. T 96 M R 96 M 5−22−10 410, 420 412CT, 422CT N/A N/A N/A N/A N/A
55−ZL−00−202 55−30−01−210−802 General Visual Inspection of the Ram Air Intake and Dorsal Fairing − Internal. 96 M 5−23−10 323 323AT N/A N/A N/A N/A N/A
55−ZL−00−203 55−30−01−210−803 General Visual Inspection of the Leading Edge of the Vertical Stabilizer − Internal. 96 M 5−23−10 324 324AT N/A N/A N/A N/A N/A

55−ZL−00−204 55−30−01−210−804 General Visual Inspection of the Vertical Stabilizer − Internal. 96 M 5−23−10 325, 327 325AL, AR, BL, BR, CL, CR, DL, DR, EL, ER, FR, GR, HR, N/A N/A N/A N/A N/A
327AL, BL, BR, CL
55−ZL−00−205 55−30−01−210−805 General Visual Inspection of the Tip of the Vertical Stabilizer − Internal. 96 M 5−23−10 326 326AL, AR, AT, CL, CT, CR, EL, ER N/A N/A N/A N/A N/A
55−ZL−00−206 55−10−01−210−801 General Visual Inspection of the Horizontal Stabilizer − External LH. 96 M 5−23−10 331, 332, 333, 334 N/A N/A N/A N/A N/A N/A
55−ZL−00−208 55−10−01−210−803 General Visual Inspection of the Leading Edge of the Horizontal Stabilizer − Internal LH. 96 M 5−23−10 331 331AL N/A N/A N/A N/A N/A

55−ZL−00−210 55−10−01−210−802 General Visual Inspection of the Horizontal Stabilizer − Internal LH. 96 M 5−23−10 332, 333, 334 332AB, BB, 333AL, 334AB, BB, CB N/A N/A N/A N/A N/A
55−10−00−201 55−00−00−220−803 Detailed Inspection of the Upper Face of the Top Canted Rib and the Rib Fittings of the T 96 M R 48 M 5−22−10 326 326AL, AR, AT, BL, BR, BT, CL, CR, CT N/A N/A N/A N/A N/A
Vertical Stabilizer and the Attachment Fittings and Skin Splices of the Horizontal
Stabilizer.
55−10−00−202 55−10−01−220−802 Detailed Inspection of the Front Spar of the Horizontal Stabilizer. T 96 M R 96 M 5−22−10 326, 332, 342 331AL, 341AR N/A N/A N/A N/A N/A
55−10−00−203 55−00−00−220−801 Detailed Inspection of the Horizontal Stabilizer (Internal Skins, Structure, Rear Spar and T 96 M R 96 M 5−22−10 326, 330, 332, 334, 340, 342, 344 326AL, AR, BL, BR, DL, DR, 331AL, 332AB, BB, 334AB, GSE 28−10−08 Kit − Video PAC Borescope N/A N/A 1 X
Hinge Fittings) and the Elevator (Forward Face of the Front Spar, Hinge Fittings and Bolts) BB, CB, 341AR, 342AB, BB, 344AB, BB, CB

55−20−00−202 55−20−01−220−802 Detailed Inspection of the External Surfaces of the Elevator. T 96 M R 48 M 5−22−10 334, 344 N/A N/A N/A N/A N/A N/A

INGENIERÍA DE PLANEACIÓN ASC 5 de 6

 FORMATO DE PARTES Y HERRAMIENTAS
CHALLENGER 605

TLMC TOOLS AND

Chapter 5 Task No. AMTOSS/NDT No. Task Title Task Interval Zone Access REFERENCE DESIGNATION PART NUMBER CAGE Code QTY SUPPLIES SPARE
Section EQUIPMENT

55−30−00−201 55−30−01−220−812 Detailed Inspection of the Vertical−Stabilizer (Forward Side of the Front Spar, Attachment T 96 M R 96 M 5−22−10 323, 324, 325 323AT, 324AT, 325BL, 326EL, ER N/A N/A N/A N/A N/A
Fittings and the Splice Strap).
55−30−00−206 55−30−01−220−806 Detailed Inspection of the Internal Structure of the Vertical Stabilizer. T 96 M R 96 M 5−22−10 325 324AT, 325AL, AR, BL BR, CL, N/A N/A N/A N/A N/A
CR DL, DR, EL, ER, FR
55−40−00−201 55−40−01−220−801 Detailed Inspection of the External Surfaces of the Rudder. T 96 M R 48 M 5−22−10 327 N/A N/A N/A N/A N/A N/A
55−40−00−202 55−00−00−220−802 Detailed Inspection of the Rudder (Forward Face of the Front Spar and Hinge Bolts) and T 96 M R 96 M 5−22−10 325, 327 N/A N/A N/A N/A N/A N/A
the Vertical Stabilizer (Aft Face of the Rear Spar and Rudder Hinge Fittings).

57−ZL−00−203 57−10−00−210−807 General Visual Inspection of the Front Spar of the Wing Center Section − External. 96 M 5−23−10 510, 610 191AB, BB, 192BB N/A N/A N/A N/A N/A

57−ZL−00−204 57−10−00−210−802 General Visual Inspection of the Wing Center Section − Internal LH. 96 M 5−23−10 510 510AB, BB N/A N/A N/A N/A N/A
57−ZL−00−208 57−40−00−210−802 General Visual Inspection of the Inboard Leading Edge of the Wing − Internal LH. 96 M 5−23−10 520 520AB, AT, AZ, BL, BZ, CL, CZ, DL, DZ N/A N/A N/A N/A N/A

57−ZL−00−212 57−40−00−210−804 General Visual Inspection of the Outboard Leading Edge of the Wing − Internal LH. 96 M 5−23−10 520, 530 520EL, 530AL, AZ, BL, BZ, CL, N/A N/A N/A N/A N/A
CZ, DL, DZ, EZ, FZ, GZ, HZ, JZ, KZ
57−ZL−00−216 57−10−00−210−804 General Visual Inspection of the Wing from WS45 to WS148 − Internal LH. 96 M 5−23−10 541, 542 540AB, BB, CB, DB, EB, FB, N/A N/A N/A N/A N/A
541AT, 571BB, CB, DB
57−ZL−00−220 57−10−00−210−806 General Visual Inspection of the Wing from WS148 to WS353 − Internal LH. 96 M 5−23−10 551, 552 550AB, BB, BT, CB, DB, EB, FB, N/A N/A N/A N/A N/A
GB, HB, JB, KB, LB
57−ZL−00−234 57−60−01−210−802 General Visual Inspection of the Aileron Shroud − Internal LH. 96 M 5−23−10 587 581HB N/A N/A N/A N/A N/A
57−10−00−201 57−10−00−220−866 Detailed Inspection of the External Center Wing (Front Spar and the Bayonet Fitting) − T 96 M R 96 M 5−22−10 190 191AB, BB, N/A N/A N/A N/A N/A
LWS50.00 to RWS50.00. 192BB
57−10−00−202 57−10−00−220−864 Detailed Inspection of the Internal Center Wing (Spars, Rib and Wing Plank Surfaces) − T 96 M R 48 M 5−22−10 510, 610 510AB, CB, N/A N/A N/A N/A N/A
LWS45.00 to RWS45.00. 610AB, CB
57−10−00−204 57−10−00−220−865 Detailed Inspection of the External Center Wing (Rear Spar and Upper Wing Plank, MLG T 96 M R 96 M 5−22−10 160, 163, 164 161DL, EL, FL, 162DL, EL, FL, N/A N/A N/A N/A N/A
Side Brace Fitting and Rear Spar Bayonet−Fitting) − LWS48.00 to RWS48.00. 163AZ, 164AZ, 191BB, 192BB

57−10−00−208 57−10−00−220−808 Detailed Inspection of the Forward Face of the Front Spar of the Wing − WS50 to WS353. T 96 M R 48 M 5−22−10 520, 530, 620, 630 N/A N/A N/A N/A N/A N/A

57−10−00−209 57−10−00−220−867 Detailed Inspection of the Internal Wing (Front Spar, Rear Spar, Wing Planks, Structure T 96 M R 48 M 5−22−10 541, 551, 641,651 540AB, BB, CB,DB, EB, FB,541AT, 550AB,BB, CB, N/A N/A N/A N/A N/A
and the MLG Mounting Fittings) − WS45.00 to Canted WS314.50. DB,EB, FB, GB,HB, 571BB, CB,DB, 581BT, CT,DT, ET,
HB,640AB, BB, CB,DB, EB, FB,GB, 641AT,650AB, AT,
BB,BT, CB, DB, EB,FB, GB, HB,671BB, CB, DB,681BT,
CT, DT,ET, H
57−10−00−213 57−10−00−220−813 Detailed Inspection of the Internal Skin and the Wing Structure − Canted WS314.5 to T 96 M R 48 M 5−22−10 552, 652 550JB, KB, LB,560AL, BB,650JB, KB, LB,660AL, BB N/A N/A N/A N/A N/A
WS353.
57−10−00−224 57−10−00−220−869 Detailed Inspection of the Wing−to−Fuselage Attachment Fittings and Bolts − FS424.00, T 96 M R 96 M 5−22−10 160, 510, 610 161CL, DL, EL,FL, 162CL, DL,EL, FL, 163AZ,164AZ N/A N/A N/A N/A N/A
FS473.15 and FS513.00.
57−10−00−227 57−10−00−220−827 Detailed Inspection of the Attachment Fittings of the Flap Hinge Box of the Inboard Flap T 96 M R 96 M 5−22−10 573, 576, 673,676 571AB, EB,572DB, GB,671AB, EB,672DB, GB N/A N/A N/A N/A N/A
− WS76.5 and WS127.25.
57−10−00−228 57−10−00−220−828 Detailed Inspection of the Attachment Fittings of the Flap Hinge Box of the Outboard T 96 M R 96 M 5−22−10 582, 585, 586,682, 685, 686 581BB, DB, FB,681BB, DB, FB,684BB, DB, FB N/A N/A N/A N/A N/A
Flap − WS178, WS220 and WS264.
57−10−00−229 57−60−01−220−808 Detailed Inspection of the Aileron (External Surfaces, Wing−to−Aileron Hinge Fittings, T 96 M R 96 M 5−22−10 587, 588, 687,688 581BT, CT, DT,ET, HB, 585AB,BB, CB, 681BT,CT, DT, GSE 20−00−04 Inclinometer − Digital N/A N/A N/A 1
Hinge Bolts and Anti−Float Torsion Bar). ET, HB,685AB, BB, CB
57−10−00−230 57−10−00−220−830 Detailed Inspection of the Hinge Fittings for the Ground Spoiler. T 96 M R 96 M 5−22−10 575, 675 N/A N/A N/A N/A N/A N/A
57−10−00−231 57−10−00−220−831 Detailed Inspection of the Hinge Fittings for the Flight Spoiler. T 96 M R 96 M 5−22−10 583, 683 N/A N/A N/A N/A N/A N/A
57−30−00−201 57−30−00−220−801 Detailed Inspection of the Skin, Spars, Attachment Fittings, and Internal Structure of the T 96 M R 96 M 5−22−10 561, 562, 661,662 560AB,BB, DB,660AB,BB, DB 06−411 Sealant PR−1425 B−1/2, B−2 or N/A 1 X
Winglet. PR−1425CF B−1/2, B−2
PRC−Desoto Intl
57−50−00−202 57−50−01−220−818 Detailed Inspection of the Inboard Flap (External Skins, Attachment Lugs and Hinge T 96 M R 96 M 5−22−10 573, 574, 576,673, 674, 676 572DB, GB,672DB, GB N/A N/A N/A N/A N/A
Arms).
57−50−00−207 57−50−01−220−819 Detailed Inspection of the Outboard Flap (External Skins, Attachment Lugs and Hinge T 96 M R 96 M 5−22−10 582, 584, 585,586, 682, 684,685, 584BB, DB, FB,684BB, DB, FB N/A N/A N/A N/A N/A
Arms). 686
57−50−00−210 57−50−01−220−810 Detailed Inspection of the Flap Hinge Boxes of the Inboard Flap. T 96 M R 48 M 5−22−10 573, 576, 673,676 571AB, EB,671AB, EB N/A N/A N/A N/A N/A
57−50−00−211 57−50−01−220−811 Detailed Inspection of the Flap Hinge Boxes of the Outboard Flap. T 96 M R 48 M 5−22−10 582, 585, 586,682, 685, 686 581BB, DB, FB,584BB, DB, FB,681BB, DB, FB,684BB, N/A N/A N/A N/A N/A
DB, FB
57−70−00−205 57−70−01−220−805 Detailed Inspection of the Hinge Bolts of the Ground Spoiler. T 96 M R 96 M 5−22−10 575, 675 N/A 04−009 Grease, Aircraft, General Purpose, Wide Temperature Range MIL−PRF−81322 N/A 1 X
Aeroshell Grease 22
Mobil Grease 28
Royco 22C
Royco 22D
Chevron W−T
57−70−00−206 57−70−01−220−804 Detailed Inspection of the Hinge Bolts of the Flight Spoiler. T 96 M R 96 M 5−22−10 583, 683 N/A 04−010 Grease, Aircraft, General Purpose, MIL−PRF−81322 N/A 1 X
71−12−00−205 71−12−01−220−801 Detailed Inspection of the Hinge Fittings of the Core Cowl Door. T 96 M R 96 M 5−22−10 435, 445 435AB, AT,445AB, AT N/A N/A N/A N/A N/A
71−13−00−202 71−10−00−220−801 Detailed Inspection of the Service Pylon Casting and Support Rails. T 96 M R 96 M 5−22−10 433, 443, 434,444 412AB, AT,422AB, AT,432AB, AT,442AB, AT N/A N/A N/A N/A N/A
71−20−00−202 71−21−01−220−803 Detailed Inspection of the Forward Engine Mount Yoke and Link Assembly. T 96 M R 96 M 5−22−10 430, 440 412AT, 422CT N/A N/A N/A N/A N/A
71−20−00−203 71−22−01−220−801 Detailed Inspection of the Aft Engine Mount Assembly. T 96 M R 96 M 5−22−10 430, 440 412AT, CT,422CT N/A N/A N/A N/A N/A
78−30−00−206 78−34−07−220−802 Detailed Inspection of the Main Pylon Tracks of the Thrust−Reverser. T 96 M R 96 M 5−22−10 433, 434, 443, 444 432AB, AT, 442AB, AT N/A N/A N/A N/A N/A
78−30−00−207 78−34−04−220−801 Detailed Inspection of the Thrust−Reverser Main Tracks. T 96 M R 96 M 5−22−10 433, 434, 443, 444 N/A 04−006 Lubricant, (Shortening) Dry Film Dow Corning 321 N/A 1 X
Molykote D321R
78−30−00−208 78−34−04−220−802 Detailed Inspection of the Attachment Fittings for the Thrust−Reverser Main Tracks. T 96 M R 96 M 5−22−10 433, 434, 443, 444 N/A N/A N/A N/A N/A N/A

78−30−00−209 78−32−04−220−801 Detailed Inspection of the Support Fittings of the Thrust−Reverser Ballscrew Actuators. T 96 M R 96 M 5−22−10 433, 434, 443, 444 N/A N/A N/A N/A N/A N/A

INGENIERÍA DE PLANEACIÓN ASC 6 de 6