MTS46# G2WD-21

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

6-Port Antenna

698-960+2 x (1695-2690) MHz


G2WD-21 Embedded RET (AISG 2.0 Compliant), Field Exchangeable
1L2H / 2.0 m 4.3-10 Connectors

Electrical Data (BASTA)

698-960 2 x (1695-2690)
Frequency(MHz)
698-896 880-960 1695-1880 1900-2200 2300-2400 2500-2690
R1 15.3±0.5 15.8±0.5
Gain dBi
Y1/Y2 17.3±0.6 17.8±0.4 17.9±0.5 18.3±0.5
Polarization ° ±45
Horizontal Pattern
3dB Beamwidth ° 66±2 63±2 60±5 66±5 69±5 65±5
F/B Ratio
Co-polar(180°±30°) 28 30 28 30 29 30
dB
Cross-Polar Boresight 0° 20 20 17 18 17 18
Ratio Sector ±60 ° 10 13 8 10 7 7
Vertical Pattern
3dB Beamwidth 11.6±1.4 9.8±0.8 6.4±0.4 5.5±0.5 5.0±0.3 4.7±0.3
°
Electrical Downtilt 0-10 0-10
1st Upper sidelobe
dB 17 18
Suppression
RF Parameters
VSWR 1.5:1
Port Isolation 27 28
dB
Band Isolation 30
3rd Order PIM dBc -153 @ 2 x 43 dBm
Impedance Ω 50
Power Handling W 500 300

Mechanical Data (BASTA)

Input Connectors 6 x 4.3-10 Female


Connector Position Bottom
Lightning Protection DC Ground
Radome Material Fiberglass
Antenna Weight 22kg 48.5 lb
Antenna Dimensions (H x W x D) 1995 x 350 x 200 mm 78.5 x 13.8 x 7.9 in
Maximum Wind Velocity 241 km/h 150 mph
Max. Wind Load @150 km/h (Front/Rear/Side) 896 / 869 / 316 N 201 / 195 / 71 lbf
Mast Diameter Supported 50 - 110 mm 2.0 - 4.3 in
Relative Humidity 5% - 95%
Operating Temperature Range -40 ~ +70 °C -40 ~ +158 °F

Rosenberger Hochfrequenztechnik GmbH & Co. KG Rosenberger Asia Pacific Co., Ltd. V 0.1
1/2
www.rosenberger.com www.rosenbergerap.com 18/03/2019
6-Port Antenna
698-960+2 x (1695-2690)MHz
G2WD-21 Embedded RET (AISG 2.0 Compliant), Field Exchangeable
1L2H / 2.0 m 4.3-10 Connectors

Layout

3 R2
Array Connector Frequency (MHz) Sub Unit # RET Type RET Serial*
R1 1-2 698-960 1 MRET RB.....XXYYxxxxx-MM
Y1 3-4 1695-2690 2 MRET RB…..XXYYxxxxx-MM
Y2 5-6 1695-2690 3 MRET RB…..XXYYxxxxx-MM
*Remark: XX – Year, YY – Week , xxxxx – Serial Number

Pattern

698-960 1695-2690

Accessories
Item Model Weight (kg) Mechanical Tilt Range (°)
Mounting Kit 85-1 4.5 0-10

Compliance
— Our quality assurance system and our environmental management system apply to the entire company
and are certified according to EN ISO 9001, EN ISO 14001 and OHSAS 18001
— Our products are compliant to the EU Directive RoHS as well as to other environmentally relevant
regulations (e.g. REACH)

While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents.
In the effort to improve our products, we reserve the right to make changes judged to be necessary. For environmental information, please refer to www.rosenbergerap.com/content/Environment.aspx

Rosenberger Hochfrequenztechnik GmbH & Co. KG Rosenberger Asia Pacific Co., Ltd. V 1.0
2/2
www.rosenberger.com www.rosenbergerap.com 18/03/2019

You might also like