Easy UPS 3S - E3SUPS20KHB2
Easy UPS 3S - E3SUPS20KHB2
Easy UPS 3S - E3SUPS20KHB2
Overview
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Presentation High-efficiency 3-phase UPS with internal batteries providing a runtime of 30 minutes. The UPS
features advanced product features, competitive specifications, and robust electrical design, making
business continuity easy in the data center or electrical room. This is an exceptionally easy to install,
operate, maintain, and service 20 kVA UPS, ideal for small and medium businesses. Includes dust
filter and conformance-coated boards for harsh environments. For battery runtime details, see the
runtime charts published under the Documents tab.
Lead time Usually Ships within 6 Weeks
General
Provided equipment Dust filter
Installation guide
Redundant No
UPS size WS
Physical
Depth 92.8 cm
Height 140 cm
Mounting preference No preference
Net weight 446 kg
Mounting mode Not rack-mountable
Two post mountable 0
USB compatible No
Width 38 cm
Input
Network frequency 45...65 Hz
Input voltage limits 304...477 V
Inputvolt_other 380 V
415 V
Maximum input current 37 A
Input harmonic distortion Less than 3 % for full load
Input voltage 400 V 3 phases
Output
Rated power in W 20000 W
Maximum configurable power in W 20000 W
Harmonic distortion Less than 3 %
Output frequency 50 Hz sync to mains
60 Hz sync to mains
Outputvolt_other 380 V
415 V
UPS type Double conversion online
Output voltage tolerance +/- 1.5 %
Output harmonic distortion < 3% linear load
Curve equation Efficiency
Curve fixed loss 0.0038
Curve load maximum 100 %
Curve load minimum 1 %
Curve proportional loss 0.0302
Curve square loss 0.0147
Curve X-axis maximum 100 %
Curve test cond ID Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical
environmental conditions, with 400V 50Hz input and 400V 50Hz balanced resistive load (PF = 1.0)
output.
Curve X-axis minimum 0 %
Curve X-axis title Load
Curve X-axis units Percentage
Curve Y-axis maximum 100 %
Curve Y-axis minimum 50 %
Curve Y-axis title Efficiency
Curve Y-axis units Percentage
Graph display 1
Output voltage 400 V 3 phases
Maximum configurable power in VA 20000 VA
Rated power in VA 20000 VA
Conformance
Product certifications CE
EAC
RCM
WEEE
Standards IEC 62040-1-1
IEC 62040-2
IEC 62040-3
IEC 62040-4
ISTA 2B
Environmental
Ambient air temperature for operation 0…40 °C
Relative humidity 0…95 % non-condensing
Operating altitude 0...3333 ft
Ambient air temperature for storage -15…40 °C
Storage Relative Humidity Non-condensing 0…95 %
Storage altitude 0.00…15240.00 m
Acoustic level 60 dBA
2
Heat dissipation 900 Btu/h
Show note OP temperature No
IP degree of protection IP20
Packing Units
Package 1 Weight 494 kg
Package 1 Height 164 cm
Package 1 width 56.3 cm
Package 1 Length 101.4 cm
Offer Sustainability
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Product out of China RoHS scope. Substance declaration for your information
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins
Optimized Energy Efficiency Energy efficient product
Contractual warranty
Warranty 1 year on-site repair or replace with factory authorized Start-Up