Umschlag.aussen_Titel 2010 06.01.

11 10:59 Seite 6

DICHTOMATIK

www.dichtomatik.eu
Any se www.dichtomatik.eu www.dichtomatik.eu www.dichtomatik.eu www.dichtomatik.eu
al. An
y time.
DI CH TO MATIK DICHTOMATIK
· Any DICH TO M AT IK
DICHsTO
eaMl. ATAIK
MATIK DICHTOMATIK ny time
. · An
y seal.
Any tim
e. · A
ny seal
. Any
time
DICHTOMATIK

Wherever you are – 3

we are not far

Any seal. Any time. 4

Better than good 9

There’s a piece of us 11
in so much

There are no 12
unknown standards for us

Exceptions are our forte 15

Material indication 16

Seals for static applications 18

Seals for rotating movements 20

Seals for 24
translational movements

Locations 29

DIN EN ISO 9001:2008

Wherever you are –
we are not far

To ensure fast delivery all over the

world, Dichtomatik has continued to
extend its network of branch offices.
There are currently 8 locations in
Europe: in England, Sweden, the
Netherlands, France, Austria,
Hungary, Italy and the headquarters
in Germany as well as locations in
the USA, Canada, Middle and South
America and Asian areas. Africa is
taken care of from Hamburg.

The principle of establishing

Dichtomatik companies locally has
proved to be a great success.
It means that Dichtomatik is close to its
customers everywhere. The local
warehouse concepts are designed in
accordance with the specific demands
of the markets in question and
guarantee the fastest delivery possible.

Every single Dichtomatik team member

conscientiously works towards living up
to the claim of our slogan „Any seal.
Any time.“ And the customer has our
total attention, whether it is a standard
order, finding a special seal or giving
complex technical advice. We want to
be the first choice for our customers.

Any seal. Any time.

 Any time. DICHTOMATIK

Seal competence
from one source

Dichtomatik is a specialist for technical

seals; exclusively seals. Our main task
is to supply our customers with the
required seal as quickly as possible.
Our extensive range – there are
Any seal.

currently over 55,000 different types

of seals in stock – is continuously
being extended.

Customer-specific seal variations are

continually being developed and this
enhances our scope of performance.
Our customer service staff is able to
refer to and obtain approximately
115,000 of these seal variations
specially produced for customers. In
our main warehouse in Hamburg, we
currently have 12 fully-automated high-
bay systems in an area of 6.000 sq.m.
In addition, the branch offices keep
stocks which are geared to the specific
demands of the local markets. Between
the placement of an order and delivery
of the goods lie only a small number
of completely system supported pro-
cedures. As a result, up to 7,500 items
are dispatched per working day in
Europe alone.

Dichtomatik is continuously working

on improvement, procedures are
optimised and services extended. The
best possible customer support with
regard to speed, flexibility and techni-
cal application is guaranteed and
makes Dichtomatik a popular partner

www.dichtomatik.de
Dichtomatik’s internet pages allow
a virtual view of our warehouse.
You can call up the availability of
standard seals as well as technical
information on the seals, including
materials descriptions and installation
suggestions under www.dichtomatik.de.
Using an individual password,
you can look up prices and this
enables you to make enquiries and
place orders around the clock.

4 Any seal. Any time.

Better than good Quality

In 1995, Dichtomatik was certified in

accordance with DIN ISO 9001 and
since 2000 in accordance with the
process-orientated version:2008.
Our main suppliers are in possession
of the ISO/TS16949 or QS 9000
qualifications so that we are able to
supply products produced according
to these guidelines. Samples according
to the Association of German
Automobile Manufacturers’ norms,
8-D reports, documentation of cpk and
ppk values, statistical process control
(SPC), Error possibility and influence
(FMEA), the production release process
PPAP, the guaranteeing of ppm values,
measuring means ability or registration
in the IMDS data bank are not
unknown to us.

The right production

method for
any requirement

Dichtomatik’s worldwide connections

to high-performance manufacturers
give us the strength and flexibility
which allow Dichtomatik to be able
to select the most suitable production
method for the particular requirement.

Compression processing, injection

moulding, thermoplastic injection
moulding, turning, lathing and puching
are the principal production methods.
Mould restricted dimensions of from
approx. 1 – 1.400 mm diameter in
metric and imperial measures are part
of the standard production. CAD and
FEM programmes constitute the inter-
face between the development depart-
ments.

It’s the mixture that

counts

Finding the most suitable material for

each specific application or modifying
an existing one is part of Dichtomatik’s
standard expert advice. In addition,
specific materials can be obtained for
special demands. For example, using
the most contemporary development
procedures, a PU material for the
hydraulics field was produced with
distinctly improved characteristics
with regard to pressure deformation
remnants, hydrolysis resistance,
wear resistance, extrusion resistance
and installation characteristics.

Any seal. Any time. 9

There’s a piece of us in so much
Your problems
are our challenge

Technical advice, design of installation

chambers, design modifications and
adaptation of standard seals to accom-
modate altered related conditions
are some of the daily demands on our
own applications engineers. As seal
specialists of many years’ standing,
we are familiar with all questions
regarding applications and materials
and work closely with both customers
and suppliers. Specific applications
development and adaptation of design
and materials are as much part of our
scope of ability as is the supervision of
new product lines right up to readiness
for industrial production.

Application know-how

Dichtomatik has developed special

applications know-how in particular
fields. The long-standing close
cooperation with manufacturers,
for example, from the motive power
technology branch has led to very
specialised applications expertise
which in turn, has triggered
the development of a large number
of Dichtomatik’s own products.

Any seal. Any time. 11

 There are no unknown standards for us
Static applications

The whole range of static seals –

o-rings, cords, x-rings, cover seals,
bonded seals, etc. – are available in
any concievable dimensions – metric,
imperial and other international stan-
dards. The large number of materials
fulfil all requirements and also have
certification in accordance with
DIN-DVGW, KTW, WRC, FDA,
NSF, ACS..

Translational movements

Piston and rod seals, u-rings, wipers,

guide strips and rings for hydraulics
are available from stock in all the
standard dimensions – in the materials:
NBR, PTFE and PU, symmetric or
asymmetric, with and without additinal
springs. Application specific
changes of design or material can
also be effected.

Function and life of a hydraulic and

pneumatic cylinder are decisively
dependent on the coordination of the
seal element used. Our experience
in combining seals, guides and wipers
to form a system have a very positive
effect on the service life.

Rotating movements

Standard design rotary shaft seals,

with or without protective lips, in the
materials: NBR, FPM are part of our
range as are special designs with
elastomer fully-coated metal bodies,
double protective or sealing lips and
reinforced sealing lips for higher
pressures.

Non-mould production, largest

diameters, modified materials (VMQ,
EPDM, ACM etc.) and adaption to the
required application are as much part
of our production spectrum as v-rings,
axial seals and rotary seals for rotating
and swivelling movements.

12 Any seal. Any time.

 Moulded parts
Exceptions are our forte to meet all requirements

Many years of experience in the

development of seals make Dichtomatik
a competent partner in finding
customer-specific solutions. Demands
for moulded parts made of elastomers
and metal and elastomer combina-
tions, or the combination of different
materials to make up a sealing
element, have become more and more
important in recent years

Fit for you

The commitment of our staff, their

motivation to perform, team spirit
and compatability are the result
of our stimulating working atmosphere.
Team spirit is fostered by fitness rooms,
our own football team, legendary
parties and film evenings. We also
have exceptional qualities when it
comes to training staff. Our trainees
have often received distinctions and
we have also received many awards
as an exemplary training company.
We have even been able to offer all
our trainees jobs on qualification.

Any seal. Any time. 15

 Material Short term Polymer Trade-names
®
ASTM D 1418 registered trademark
indication
Elastomers

NBR Acrylonitrile-butadiene rubber Perbunan, Buna N

Polysar-Krynac

FKM Fluoro rubber Viton, Fluorel, Tecnoflon

EPDM Ethylene propylene diene rubber Buna AP, Keltan, Dutral

VMQ Silicone rubber Silopren

CR Chloroprene rubber Neoprene, Baypren

HNBR Hydrogenated Therban, Zetpol

acrylonitrile-butadiene rubber

ACM Acrylate rubber Cyanacryl, Europrene

AR, Noxtite PA, Nipol AR

AEM Ethylen acrylate rubber Vamac

FVMQ Fluorosilicone rubber Silastic

FFKM Perfluoro rubber Kalrez, Chemraz, Simriz

TFE/P Tetrafluoroethylene-propylene Aflas, Fluoraz

rubber

SBR Styrene-butadiene rubber Buna Hüls, Buna SB,

Europrene, Cariflex S,
Solprene, Carom

ECO Epichlorohydrin rubber Epichlomer, Hydrin,

Gechron

CSM Chlorosulfonated polyethylene Hypalon

AU, EU Polyurethane Urepan, Desmopan,

Vulkollan, Adipren
LSR Liquid Silicone Rubber

NBR F Rubber fabric materials

Thermoplastic elastomers

TPU Thermoplastic Irogran, Desmopan,

polyurethane Elastollan C

TPEE Tetrafluoroethylene- Hytrel

propylene rubber

Thermoplastics

PTFE Polytetrafluorethylene Teflon, Hostaflon

FEP Fluorinated ethylene-propylene Neoflon

PA Polyamide Nylon, Durethan, Ultramid

POM Polyoxymethylene Hostaform C, Delrin,

(Polyacetal) Ultrform

PEEK Polyetheretherketone Victrex

HG Hard fabric materials Ferrozell, Pertinax

16 Phenolic resin + synthetic fibre fabric
Short term Material Trade-names
SAE - code

Steel

1008 carbon steel 1.0204/1.0330

1070 gather spring steel 1.1231/1.0603

304 stainless steel 1.4301 (V2A)

316 stainless steel 1.4401/1.4436

316Ti stainless steel 1.4571/1.4573 (V4A)

316L stainless steel 1.4404/1.4435

Any seal. Any time. 17

Static applications
O-Rings Description Product Mat. Hardn. Cross- Colour Encapsu- Speci- Comp. max. Temp.
Sh-A linked lated fication Pressure °C
MPa(bar)

OR NBR 70 OR NBR 70 black 0100 -30/+100

OR NBR 80 OR NBR 80 black 0110 -30/+100

OR NBR 90 OR NBR 90 black 0120 -30/+100

OR FKM 80 OR FKM 80 black 0130 -15/+200

OR EPDM 70 OR EPDM 70 black 0170 -45/+130

OR VMQ 70 OR VMQ 70 red 0180 -55/+200

OR NBR 70 OR NBR 70 black BiB* 0100 -30/+100

Standard dimensions from min. 0.73 mm Di up to max. 700 mm Di · Special dimensions up to max. 2500 mm Di

Cord Description Product Mat. Hardn. Cross- Colour Structure Tole- Comp. max. Temp.
Sh-A linked rance Pressure °C
MPa(bar)

RS NBR 70 RS NBR 70 black E1 2201 -30/+100

RS FKM 75 RS FKM 75 black E1 2202 -15/+200

RS EPDM 70 RS EPDM 70 Perox. black E1 2201 -50/+150

RS VMQ 70 RS VMQ 60 red E2 4101 -55/+200

Standard dimensions from min. 1.5 mm ø up to max. 30 mm ø · Special dimensions up to max. 40 mm ø

X-Rings Description Product Mat. Hardn. Cross- Colour Model Speci- Comp. max. Temp.
Sh-A linked fication Pressure °C
MPa(bar)

XR NBR 70 XR NBR 70 black 1807 -30/+100

XR FKM 70 XR FKM 70 black 1806 -15/+200

Standard dimensions from min. 1.78 mm Di up to max. 660 mm Di *BiB = Bag in bag packing

18
Bonded seals Description Product Mat. Hardn. Cross- Colour Metal Model Comp. max. Temp.
Sh-A linked Pressure °C
MPa(bar)

US NBR US NBR 70 black RS 3409 25(250) -30/+100

USS NBR US NBR 70 black RS S 3409 25(250) -30/+100

US FKM US FKM 70 brown RS 3402 25(250) -15/+200

USS FKM US FKM 70 brown RS S 3402 25(250) -15/+200

US NBR US NBR 70 black RN 3409 25(250) -30/+100

USS NBR US NBR 70 black RN S 3409 25(250) -30/+100

USS FKM US FKM 70 brown RN S 3402 25(250) -15/+200

Standard dimensions from min. 3.05 mm Di bis up to 90 mm Di · Special dimensions up to max. 350 mm Di

Back- Description Product Mat. Hardn. Cross- Colour Model Speci- Comp. max. Temp.
up-rings Sh-A linked fication Pressure °C
MPa(bar)

STU STU NBR 90 black 1801 -30/+100

Profile rings Description Product Mat. Hardn. Cross- Colour Product Model Comp. max. Temp.
acc. to DIN 3869 Sh-A linked group Pressure °C
MPa(bar)

FOR FOR NBR 85 black 3869 1803 -30/+100

3869 NBR

FOR FOR FKM 80 green 3869 1804 -15/+200

3869 FKM

Custom-moulding Description Product Mat.

FOR FOR NBR, FKM, EPDM, VMQ, H-NBR, AEM, ACM

Boxes Description Product

BOX OR, XR, RS

19
Rotating movements
Rotary Description Product DesignModel Profile- Mat. Hardn. Colour Speci- Com- max. Temp.-
shaft seals No. Sh-A fication pound Speed range
m/s °C

WA W A NBR 70 black 3412 12 -40/+100

7501

WAS W A S NBR 70 black 3412 12 -40/+100

7501

WA FKM W A FKM 80 brown VU 3403 35 -30/+200

WAS FKM W A S FKM 80 brown VU 3403 35 -30/+200

WB W B NBR 70 black 3412 12 -40/+100

4604
7501

WBS W B S NBR 70 black 3412 12 -40/+100

4604
7501

WC W C NBR 70 black 3412 12 -40/+100

4604
7501

WCS W C S NBR 70 black 3412 12 -40/+100

4604

WAO W A O NBR 70 black 3412 6 -40/+100

WAOK W A OK NBR 70 green 3413 6 -40/+100

WBO W B O NBR 70 black 3412 6 -40/+100

WAK W A K NBR 70 black 3412 12 -40/+100

WAG W A G NBR 70 black 3412 12 -40/+100

WAK FKM W A K FKM 80 brown 3403 35 -30/+200

WAG FKM W A G FKM 80 brown 3403 35 -30/+200

WAY W A Y NBR 80 black 3404 12 -40/+100

Standard dimensions from min. 4 mm Di up to max. 650 mm Da · Special dimensions up to max. 1100 mm Da

20
Rotary Description Product DesignModel Profile Mat. Hardn. Colour Speci- Com- max. Temp.-
shaft seals No. Sh-A fication pound Speed range
m/s °C

WASY W A SY NBR 80 blue 3414 12 -40/+100

WAY FKM W A Y FKM 80 brown 3403 35 -30/+170

WASY FKM W A SY FKM 80 brown 3403 35 -30/+170

WAX W A X NBR 70 black 3412 10 -40/+100

WAD W A D NBR 70 black 3412 6 -40/+100

WBD W B D NBR 70 black 3412 6 -40/+100

WCP 20 W CP 20 PTFE 00 grey 3707 40 -90/+250

WCL W C L NBR 75 black 8601 12 -40/+100

WCL FKM W C L FKM 75 black 8603 15 -30/+200

WE 05 W E 05 NBR 80 black 2101 20 -30/+100

WE 05 FKM W E 05 FKM 80 black 2101 25 -20/+180

WE 06 W E 06 NBR 80 black 2101 20 -30/+100

WE 06 FKM W E 06 FKM 80 black 2101 25 -20/+180

WE 07 W E 07 NBR 80 black 2101 20 -30/+100

WE 07 FKM W E 07 FKM 80 black 2101 25 -20/+180

WEPO W E PO PTFE 00 black 9809 15 -20/+200

Standard dimensions from min. 4 mm Di up to max. 650 mm Da · Special dimensions up to max. 1100 mm Da

21
 V-Rings Description Product DesignMat. Hardn. Colour Mat. Model Com- max. Temp.-
Sh-A Perfor- pound Speed range
mance m/s °C

VA V A NBR 60 black OZB 3402 8 -40/+100

9202
5604

VS V S NBR 60 black OZB 3402 8 -40/+100

VL V L NBR 60 black OZB 3402 8 -40/+100

5604
9202

VE V E NBR 60 black OZB 5601 8 -40/+100

5604

VA FKM V A FKM 60 brown 5601 6.5 -20/+200

3401
3402
3403

VS FKM V S FKM 60 brown 3401 6.5 -20/+200

3402
3403

VL FKM V L FKM 60 brown 5601 6.5 -20/+200

3402
3403

VE FKM V E FKM 60 brown 5601 6.5 -20/+200

VA FKM 70 V A FKM 70 brown 9203 6,5 -20/+200

VE FKM 70 V E FKM 70 brown 5601 6.5 -20/+200

Standard dimensions from min. 3 mm Di up to max. 2000 mm Da · Special dimensions up to max. 7000 mm Da

Axial seals Description Product ProfileMat Hardn. Colour Metal Surface Spez. Com- max. Temp.-
No. Sh-A pound Speed range
m/s °C

VRM 01 VRM 01 NBR 70 black GS 3411 12 -40/+100

VRM 02 VRM 02 NBR 70 black GS 3411 12 -40/+100

VRM 01 FKM VRM 01 FKM 70 brown GS 3403 12 -30/+180

VRM 02 FKM VRM 02 FKM 70 brown GS 3403 12 -30/+180

Standard dimensions up to max. 215 mm Da · Special dimensions up to max. 280 mm Da

22
Cassette seals Description Design Model Profile Mat. Hardn. Colour Metal max. Temp.-
No. Sh-A Speed range
m/s °C

C NBR 70 black
FKM 80 black

Cover seals Description Product ProfileMat. Hardn. Colour Metal Surface Spez. Com- max. Temp.-
No. Sh-A pound Pressure range
bar °C

VER 01 VER 01 NBR 70 black GS 3412 0.5 -30/+100

VER 02 VER 02 NBR 70 black GS 3412 0.5 -30/+100

0207

VER 03 VER 03 NBR 70 black GS 3412 0.5 -30/+100

VER 01 FKM VER 01 FKM 70 brown GS 3403 0.5 -20/+200

VER 02 FKM VER 02 FKM 70 brown GS 3403 0.5 -20/+200

VER 03 FKM VER 03 FKM 70 brown GS 3403 0.5 -20/+200

Standard dimensions up to max. 230 mm Da · Special dimensions up to max. 350 mm Da

Shaft repair Description Product DesignMetal Surface Assembling aid Packaging Com- max. Temp.-
sleeves pound Speed range
m/s °C

WSH R WSH R NG 304 lead-free CARB08 PACK

Standard dimensions up to max. 210 mm Da · Special dimensions up to max. 1000 mm Da

23
Translational movements
Piston seals Description Product Design Profile Speci- Model Mat. Hardn. Com- max. max. Temp.-
No. fication Sh-A pound Speed Pressure range
m/s MPa(bar) °C

KNA 28 K NA 28 E TPU 95 3401 0.5 40(400) -40/+100

KN 25 K N 25 E TPU 95 3401 0.5 30(300) -40/+100

KNA 23 K NA 23 E NBR 90 3006 0.5 16(160) -30/+100

KN 21 K N 21 E NBR 90 3006 0.5 16(160) -30/+100

KN 36 K N 36 E TPU 95 3401 0.5 40(400) -40/+100

KN 05 K N 05 E NBR 80 3002 0.5 20(200) -30/+100

KNA 16 K NA 16 E STFAH NBR 80 3002 0.5 50(500) -30/+100

KPOR 31 K POR 31 E PTFE 00 9807 15 40(400) -30/+100

KPOR 30 K POR 30 Z PTFE 00 9807 15 40(400) -30/+100

KPUOR 70 K PUOR 70 Z TPU 95 3001 0.5 25(250) -30/+100

KK 71 K K 71 Z STA PTFE 00 3001 1.5 40(400) -30/+100

KK 03 K K 03 Z STFA NBR 80 3002 0.5 40(400) -30/+100

KK 22 K K 22 Z STFA NBR F 90 3005 0.5 40(400) -30/+100

KDS 01 K DS 01 E 1/0 NBR F 90 3005 0.5 40(400) -30/+100

KNA 44 K NA 44 E PTFE 00 9808 15 35(350) -150/+250

Standard dimensions from min. 7.5 mm Da up to max. ca. 300 mm Da · Special dimensions up to max. 1200 mm Da

24
Rod Seals Description Product Design Profile Speci- Model Mat. Hardn. Com- max. max. Temp.-
group No. fication Sh-A pound Speed Pressure range
m/s MPa(bar) °C

SN 25 S N 25 E TPU 95 3401 0.5 30(300) -40/+100

SNI 30 S NI 30 E TPU 95 3401 0.5 40(400) -40/+100

SNI 39 S NI 39 E ZL TPU 95 3401 0.5 40(400) -40/+100

SN 21 S N 21 E NBR 90 3006 0.5 16(160) -30/+100

SNI 24 S NI 24 E NBR 90 3006 0.5 16(160) -30/+100

SN 05 S N 05 E NBR 80 3002 0.5 20(200) -30/+100

SNI 07 S NI 07 E STI NBR 80 3002 0.5 40(400) -30/+100

SN 36 S N 36 E TPU 95 3401 0.5 40(400) -40/+100

SNI 72 S NI 72 E STI TPU 90 3001 0.5 40(400) -30/+100

SPOR 31 S POR 31 E PTFE 00 9807 15 40(400) -30/+100

SPOR 30 S POR 30 Z PTFE 00 9807 15 40(400) -30/+100

SDS 01 3/2 S DS 01 E 3/2 NBR F 90 3005 0.5 40(400) -30/+100

NBR 90 3006

SDS 01 1/0 S DS 01 E 1/0 NBR F 90 3005 0.5 40(400) -30/+100

SDR 01 S DR 01 E NBR 90 3006 0.5 - -30/+100

NBR F 90 3005 0.5 - -30/+100

SNI 43 S NI 43 E PTFE 00 9808 15 35(350) -150/+250

Standard dimensions from min. 3 mm Di up to max. ca. 650 mm Di · Special dimensions up to max. 1200 mm Di

25
 Wiper Description Product Design Profile Speci- Model Mat. Hardn. Com- max. max. Temp.-
group No. fication Sh-A pound Speed Pressure range
m/s MPa(bar) °C

AE 40 A E 40 NBR 90 3006 4 -30/+100

AE 42 A E 42 TPU 90 3001 2 -40/+100

AE 41 A E 41 NBR 90 3006 4 -30/+100

AE 47 A E 47 TPU 90 3001 2 -40/+100

AM 43 A M 43 NBR 90 3402 1 -40/+100

AM 44 A M 44 TPU 95 3401 2 -40/+100

AM 45 A M 45 NBR 90 3402 1 -40/+100

AM 54 A M 54 TPU 95 3401 1 -40/+100

AD 60 A D 60 PTFE 00 9807 15 -30/+100

AD 61 A D 61 PTFE 00 9807 15 -30/+100

AD 48 A D 48 TPU 95 3401 1 -40/+100

AD 51 A D 51 NBR 90 3006 1 -30/+100

ADM 55 A DM 55 TPU 95 3401 1 -40/+100

Standard dimensions from min. 4 mm Di up to max. approx. 415 mm Di · Special dimensions up to max. 1200 mm Di

26
SAE flange seal Product Product Design Profile Speci- Model Mat. Hardn. Com- max. max. Temp.-
group No. fication Sh-A pound Speed Pressure range
m/s MPa(bar) °C

FLAN 89 FLAN 89 TPU 95 3001 50(500) -30/+100

SAE- flange dimension 1/2” - 2”

Radial seals Product Product Design Profile Speci- Model Mat. Hardn. Com- max. max. Temp.-
group No. fication Sh-A pound Speed Pressure range
m/s MPa(bar) °C

RPORI 32 R PORI 32 Z PTFE 9809 ≤5 30(300) -30/+120

RPORA 32 R PORA 32 Z PTFE 9809 ≤5 30(300) -30/+120

Standard dimensions from min. 3,1 mm Di up to max. 1000 mm Da

Guide elements Product Product Design Profil- Speci- Model Mat. Hardn. Com- max. max. Surface Temp.-
group No. fication pound Speed Pressure range
m/s N/mm2 °C

FB 01 F B 01 PTFE 00 9853 15 15 -60/+200

FB 05 F B 05 HG 00 0301 1 350 -50/+130

Standard dimensions from min. 1.55 mm cross sec. up tp max. 4 mm cross sec. · L-dimens. min. 2.5 mm up to max. 50 mm

FRK 01 F RK 01 30 PTFE 00 9853 15 15 -60/+200

FRK 05 F RK 05 45 HG 00 0301 1 350 -50/+130

FRS 01 F RS 01 30 PTFE 00 9853 15 15 -60/+200

FRS 05 F RS 05 45 HG 00 0301 1 350 -50/+130

FRS 06 F RS 06 EN POM 00 3003 1 35 -30/+110

Standard dimensions from min. 13 mm Di up to max. 1200 mm Da

27
Germany France
DICHTOMATIK GMBH DICHTOMATIK S.A.S.
Albert-Schweitzer-Ring 1 Espace Entreprise de
D-22045 Hamburg Mâcon Loché TGV
P.O.Box 70 04 80 F-71000 Loché
D-22004 Hamburg Phone 03/85 27 02 80
Phone +49/40 /66 98 90 Fax 03/85 35 69 37
Fax +49/40 /66 98 91 01 [email protected]
[email protected] www.dichtomatik.fr
www.dichtomatik.de
Hungary
The Netherlands DICHTOMATIK KFT.
DICHTOMATIK B.V. Vegyész utca 17-25
Benjamin Franklinstraat 6 H-1116 Budapest
NL-8013 NC Zwolle Phone 01/802 64 00
Postbus 40 102 Fax 01/802 64 10
NL-8004 DC Zwolle [email protected]
Phone 038 /460 16 06 www.dichtomatik.hu
Fax 038 /467 19 00
[email protected] USA
www.dichtomatik.nl DICHTOMATIK North America
1087 Park Place
Great Britain USA-Shakopee, Minnesota 55379
DICHTOMATIK LIMITED Phone 1 800 328 2840
Donington House Fax 1 877 777 6869
Riverside Road [email protected]
Pride Park www.dichtomatik.us
GB-Derby DE24 8HX
Phone 01332 /52 44 00 Canada
Fax 01332 /52 44 04 DICHTOMATIK Canada
[email protected] 950 Denison Steet Unit 21
www.dichtomatik.co.uk CDN-Markham, Ontario L3R3K5
Phone 905/470 22 66
Austria Fax 905/470 20 55
DICHTOMATIK HANDELSGES. MBH [email protected]
Rautenweg 17 www.dichtomatik.ca
A-1220 Wien
Phone 01/259 35 41-0 Brazil
Fax 01/259 35 41-30 Division Dichtomatik Brazil
[email protected] Freudenberg-Nok
www.dichtomatik.co.at Componentes Brazil Ltda.
Av. Piraporinha, 411
Sweden BR-Diadema 09950-902 SP
DICHTOMATIK AB Phone 11/33 63 80 80
Box 142 Fax 11/33 63 80 81
Hjalmar Brantingsväg 25 [email protected]
S-26122 Landskrona
Phone 0418 /44 98 00 Mexico
Fax 0418 /44 98 20 International Seal De Mexico
[email protected] S.A. De Cv.
www.dichtomatik.se Av. De Las Misiones No. 5
Fracc. Ind. Bernardo Quintana
Italy MEX-El Marques., Queretaro 76246
DICHTOMATIK S.R.L. Phone 442/221 63 03
Via Delle Fabbriche 6 Fax 442/221 63 27
I-16158 Genova-Voltri [email protected]
Phone 010 /612 75 www.dichtomatikmex.com
Fax 010 /613 38 61
[email protected]
www.dichtomatik.it

29
The technical details in this catalogue
are based on experience and standard
tests repeated in quality assurance and
are to be seen as general and non-
binding approximate values which may
well vary up or down. We therefore
recommend that you consult our
technical department for concrete cases
in which limits may be reached.

The catalogue details may be altered

without notice. Upon the publication of
a new catalogue, previous editions
cease to be valid.

Reproduction in any form requires the

express authorisation of Dichtomatik
GmbH.
10.10.1

30
 Umschlag.aussen_Titel 2010 06.01.11 10:59 Seite 5

seal.
Any tim
e. · A
ny seal
. Any tim
e. · A
ny seal
. Any tim
e. · A
ny seal
. Any
time. ·
dichtomatik.eu www.dichtomatik.eu www.dichtomatik.eu www.dichtomatik.eu www.dichtomatik.eu ww
An

DICHTOMATIK DICHTOMAT
DICHTOMATIK DICHTOMATIK
HTOMATIK DICHTOMATIK

Any seal. Any time.