MCQ For BMCT-VII (Final Exam Dec2020)

MCQ for BMCT-VII (Regular) Final exam , Dec-
2020
Marks: 30
1. In Slip Form Construction, -------------- is poured into a continuously moving part.
a) Aggregate b) mortar c) concrete d) cement
2. _______________ is suitable for construction of core walls in high rise structure.
a) Lift Slab Technology B) Slip Form Technology C) Cable Stressed Structures D)

None Of All
3. _____________ method was initially devised and utilized in interstate highway

construction during 1950s.
a) Horizontal slip form b) Vertical slip form c) Slip form construction d)

Lift slab construction
4. ____________________ method becomes more advantageous in building with

similar floor plans.
a) Slip form construction b) Vertical slip form c) lift slab construction d)

Conventional building construction
5. No large span slab is constructed in ______________ type of construction.
a) Lift Slab b) Cable Stressed C) Conventional Building D) Slip Form
6. Use of lift slab construction technology is limited up to ____________ floors.
a) 8-11 b) 10- 13 c) 12 d) 15-16
7. The Sequence of lifting slabs is influenced by________________
a) Weight of the slabs b) Height of the building c) Lifting capacity of the jack d) All of
these
8. ___________ system requires a central and accurate control to provide a uniform

lift from all directions.
a) Lifting capacity of the jack b) Lift Slab construction c) Cable Stressed d)none of
all
9. In Lift Slab Construction, slabs are lifted by _______________ .

a) Jacks b) Casings C) Columns D) Rollers
10. Building consumes energy directly or indirectly in all phases of it’s life and hence
they are analyzed by _______________ .
a) Life cycle assessment b) Life cycle impact assessment c)Life cycle energy
assessment d) Strategic Planning
11. Compilation and evaluation of the inputs , outputs and environmental impacts of
the product system throughout its life cycle is called as ___________.
a) Impact assessment b) Inventory assessment c) Energy assessment d) Life Cycle

assessment
12. Inventory analysis under life-cycle assessment includes ________________.
a) Data Collection and Calculations B) Assumptions C) Limitations d) All of them
13. The selection of building materials plays an important role in achieving the goal of
___________ in the construction industry
a) Sustainable Development B) Energy Efficiency C) Impact Assessment d) none of

them
14. Life cycle of a building can be divided into __________,design , construction

,___________ and demolition.
a) material , cost b) feasibility , operation c) estimate, maintenance d) none of

them
15. ____________ plays an important role in enhancing the overall performance of

the building and in achieving the goal for Sustainable construction in the Industry.
a) Orientation b) Context C) Materials D) Aesthetics
16. It becomes apparent that sustainable building materials are related to the following
criteria:
a) Resource efficiency b) Energy efficiency c) Pollution prevention d) All of them
17. Filler slab is economical than the conventional R.C.C slab. (True/False)
18. Benefits of Earth Blocks ___________
a) Cost and Energy efficient b) Non Toxic C) Fire And Pest Resistant d) all of them
19. Some of the Technical benefits of fly ash use are Higher strength and increased
durability.
( True/False) _____________
20. By making use of locally available demolition waste and concrete material
aggregates, there would be sufficient increase in aggregate requirement at construction
site. (True/False) ------------
21. Processing of waste will make the system Sustainable. (True/ False) ----------
22. Ferro cement has low strength and low fireproofing properties. (True/False)--------
23. Flexibility and Damping are the two major components of base isolation system.
(True/False)--------
24. A ____________wall is a wall that warms trapped air, and then circulates it to
help heat a house.
a) Exterior b) load- bearing c) R.C.C d) Trombe
25. ____________structures are also known as surface structures.
a) Shell b) Cable c) Suspended d) Vault
26.PTFE is completely inert and does not affected by weather. (True/False)-------
27. Cables can only support Tensile loading. (True/False)
28. Cables are used as ___________
a)supports to suspension roofs b) suspension bridges c) Trolley wheels d) All of

them
29. A cable stayed bridge has one or more pylons (towers) from which cables support
the bridge deck.
(True/False) ----------
30. The main type of force in a suspension bridge are compression in cables and tension
in pillars.
(True/False)----------

MCQ For BMCT-VII (Final Exam Dec2020)

Uploaded by

Copyright:

Available Formats

MCQ For BMCT-VII (Final Exam Dec2020)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MCQ For BMCT-VII (Final Exam Dec2020)

Uploaded by

Copyright:

Available Formats

MCQ for BMCT-VII (Regular) Final exam , Dec-

1. In Slip Form Construction, -------------- is poured into a continuously moving part.

a) Aggregate b) mortar c) concrete d) cement

2. _______________ is suitable for construction of core walls in high rise structure.

a) Lift Slab Technology B) Slip Form Technology C) Cable Stressed Structures D)

3. _____________ method was initially devised and utilized in interstate highway

a) Horizontal slip form b) Vertical slip form c) Slip form construction d)

4. ____________________ method becomes more advantageous in building with

a) Slip form construction b) Vertical slip form c) lift slab construction d)

5. No large span slab is constructed in ______________ type of construction.

a) Lift Slab b) Cable Stressed C) Conventional Building D) Slip Form

6. Use of lift slab construction technology is limited up to ____________ floors.

a) 8-11 b) 10- 13 c) 12 d) 15-16

7. The Sequence of lifting slabs is influenced by________________

8. ___________ system requires a central and accurate control to provide a uniform

9. In Lift Slab Construction, slabs are lifted by _______________ .

a) Impact assessment b) Inventory assessment c) Energy assessment d) Life Cycle

12. Inventory analysis under life-cycle assessment includes ________________.

a) Data Collection and Calculations B) Assumptions C) Limitations d) All of them

a) Sustainable Development B) Energy Efficiency C) Impact Assessment d) none of

14. Life cycle of a building can be divided into __________,design , construction

a) material , cost b) feasibility , operation c) estimate, maintenance d) none of

15. ____________ plays an important role in enhancing the overall performance of

a) Orientation b) Context C) Materials D) Aesthetics

a) Resource efficiency b) Energy efficiency c) Pollution prevention d) All of them

18. Benefits of Earth Blocks ___________

a) Exterior b) load- bearing c) R.C.C d) Trombe

25. ____________structures are also known as surface structures.

a) Shell b) Cable c) Suspended d) Vault

26.PTFE is completely inert and does not affected by weather. (True/False)-------

27. Cables can only support Tensile loading. (True/False)

28. Cables are used as ___________

a)supports to suspension roofs b) suspension bridges c) Trolley wheels d) All of

You might also like