Scribd
Upload
124 views2 pages

DT-176CV2: True Rms Voltage & Current Data Logger

The document describes a CEM DT-176CV2 data logger that can measure and log true RMS voltage and current over long periods of time. It stores up to 256,000 readings, displays real-time and min/max data, and transfers logged data to a PC via USB for analysis with included software.

Uploaded by

Andrzej Gomula
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views2 pages

DT-176CV2: True Rms Voltage & Current Data Logger

The document describes a CEM DT-176CV2 data logger that can measure and log true RMS voltage and current over long periods of time. It stores up to 256,000 readings, displays real-time and min/max data, and transfers logged data to a PC via USB for analysis with included software.

Uploaded by

Andrzej Gomula
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CEM

DT-176CV2
TRUE RMS VOLTAGE & CURRENT
DATA LOGGER
Datalog upto 256,000 Reading with user programmable sample rate
from 1second to 24 hours. This Datalogger is designed and produced
according to IEC61010 safety standard, and leave factory with best
status after passed inspection.
With the CEM Voltage and Current Data Logger DT-176CV2, you can
monitor and log data (Voltage / Current, Current / Current and Voltage /
Voltage) over long periods of time and then easily transfer the data to the
PC for viewing and evaluation. The LCD Display provides real time data,
Max / Min data and time information.

FEATURES

• Measure True RMS AC Voltage (600V) or Current (200A) 



• Readings can be downloaded to your PC via the USB
interface and 
analyzed using the included software or
exported to a spreadsheet 

• LCD indicates time/date, current readings, and Min/Max 

• Normal, Peak and Capture (user-specified trigger level)
recording modes 

• Auto Power off and battery check 

• Complete with current clamp, test leads, USB cable,
Windows® compatible software, universal AC Adaptor, and
four AAA batteries
• Waveform for Voltage and current can be stored.
• Datalog upto 256,000 readings.
• Captured readings can be downloaded to your using the
included USB cable and software, for further analysis,
Readings can also be expect into a spreadsheet for creating
charts and graphs

www.cem-india.com / www.cem-instruments.in
DT-176CV2 Voltage & Current Data Logger

SPECIFICATIONS

Display : Multi-function LCD


Maximum Data Point : 256,000 Values
Channels : Dual Channel, TRMS AC Voltage or Current
Sample Rate : 1s to 24h Selectable
Analysis Software : 2000 / XP / Vista /Windows 7 & 8
Data Output : USB Port
Current Clamp Jaw Opening : 0.5” (12.7mm)
Open input indication : “LO” Appears on the LCD
Low Battery Indication : Battery Symbol Appears on the LCD
Power Supply : 4AAA Batteries and 1CR 3V memory Button Battery (Cr2032 or Equivalent)
Battery Life : 5 Days (Appoximately)
AC Adaptor : 9V, 0.5A
Standards : CE, CAT III 600V, for inside use, Maximum height 2000 meters
Operating Temperature : 0°C to 50°C, -32°F to 122°F
Operating Humidity : < 70% RH
Storage Temperature : -20°C to 60°C (-4°F to 140°F)
Storage Humidity : < 80% Relative Humidity
Dimensions : 4.5 x 2.5 x 1.3” (114 x 63 x 34mm)
Weight : 8.70z. (248g)

Function Range Basic Accuracy


Voltage (40Hz to 1kHz) 10V to 600.0VAC ± 2.0% r± 1V
Current (50/60Hz) 10A to 200.0A ± 2.0% r± 1A

SAMPLE SCREEN SHORT

You might also like