STAR™ Aliphatic Amine Line Pipe (High Pressure - API 15HR DESIGN - Product Data)

Product Description Benefits

• Pressure - Up to 3250 psi (22,4 MPa) • Corrosion Control
• Resin System - Aliphatic Amine Cured Epoxy • Reduced Installation Costs
• Reinforcement - Premium Fiberglass • Improved Flow Efficiency
• Joining Systems - API 8rd Threaded
• Reduced Paraffin & Scale Build-Up
• Joint Length - 30 Feet (9,1 mts) Nominal
Random Lengths of 20 to 32 Feet (6,1 to 9,8 mts) • Reduced Maintenance Cost
• Temperature - Up to 200°F (93.3°C) Maximum
• Sizes - 1½ through 8 inches Applications
• Fittings - A variety of filament wound API 5B • Production Lines or Injection Lines
threaded fittings are available. API 15HR design • Transfer Lines or Disposal Lines
systems require higher rated fittings, refer to the • Oil, Gas, Saltwater, CO2 and H2S
STAR High Pressure Threaded Fittings Product
Data sheet. Temperature interpolation is not
recommended for fittings.

High Pressure Design > 500 psi

• Design Life - 20 years at full rating
• Design Temperature - 150°F (65.6°C)
• Wall Thickness - Minimum Joining System
• Hoop Stress - Lower Confidence Limit (LCL) of Advanced Composite Thread (ACT)
Long Term Hydrostatic Strength according to
ASTM D2992-B
• 100% Factory Hydro Test - All sizes at 1.5 times the
Series pressure rating

Flow Factors
• Hazen Williams C=150
• Absolute Roughness = 0.00021 in. (0.00533 mm)

Nominal Moduli
• Hoop Modulus of Elasticity
73ºF - 4.3 x 106 psi (29.7 GPa)
API Threads
150ºF - 3.6 x 106 psi (24.6 GPa)
• ACT - Molded threads using a graphite, ceramic
200ºF - 2.5 x 106 psi (17.0 GPa)
and epoxy composite for high performance
• Axial Modulus of Elasticity applications.
73ºF - 2.3 x 106 psi (16.1 GPa)
150ºF - 1.9 x 106 psi (13.3 GPa) • All 1½” EUE 10rd and 23/8” - 4½” EUE 8rd API
200ºF - 1.3 x 106 psi (9.2 GPa) threads conform to API 5B Table 14, 14th Edition
(L4 is minimum) and all 5½” - 95/8” OD 8rd casing
• Poisson’s Ratio
threads conform to API 5B Table 7, 14th Edition (L4 is
nah= 0.38 (minor)
minimum).
nha= 0.69 (major)

Physical Properties
• Density = 124 lbs/cu ft (1986 kgs/cu m)
• Specific Gravity = 1.99

Thermal Properties
• Coefficient of Thermal Conductivity
0.23 BTU/(ft•hr•°F) (0.4 W/(m•°C))
• Axial Coefficient of Thermal Expansion
10.4 x 10-6 in/in/°F (18,8 x 10-6 mm/mm/°C)
• Hoop Coefficient of Thermal Expansion
6.2 x 10-6 in/in/°F (11,2 x 10-6 mm/mm/°C)

www.fgspipe.com • [email protected]
 SIZE NOMINAL PIPE DIMENSIONS Minimum Short-Term
Inside Outside Wall Pipe Connection Bending Tensile
Diameter Diameter Thickness Weight Diameter Radius Rating
Pipe Thread In (mm) In (mm) In (mm) Lbs/ft (kg/m) In (mm) Ft (m) Lbs (kgs)

Series 500 (3,4 MPa)(1) 500@150°F (65.5°C), 450@180°F (82.2°C), 400@200°F (93.3°C)

3 3 1/2 2.94 (74,7) 3.07 (78,0) 0.07 (1,8) 0.70 (1,0) 4.20 (106,7) 154 (46,9) 1700 (771)
4 4 /21
3.85 (97,8) 4.02 (102,1) 0.09 (2,3) 1.20 (1,8) 5.45 (138,4) 201 (61,3) 2900 (1315)
6 6 5/8 5.93 (150,6) 6.18 (157,0) 0.12 (3,0) 2.30 (3,4) 7.15 (181,6) 309 (94,2) 6700 (3039)
8 8 /85
7.74 (196,6) 8.07 (205,0) 0.17 (4,3) 4.30 (6,4) 9.25 (235,0) 404 (123,1) 11800 (5352)

Series 750 (5,2 MPa)(1) 750@150°F (65.6°C), 650@180°F (82.2°C), 600@200°F (93.3°C)

2 2 /83
1.94 (49,3) 2.07 (52,6) 0.07 (1,8) 0.40 (0,6) 3.05 (77,5) 104 (31,7) 1100 (499)
2½ 2 7/8 2.37 (60,2) 2.52 (64,0) 0.08 (2,0) 0.60 (0,9) 3.55 (90,2) 126 (38,4) 1700 (771)
3 3 /21
2.94 (74,7) 3.14 (79,8) 0.10 (2,5) 1.00 (1,5) 4.25 (108,0) 157 (47,9) 2700 (1225)
4 4 /21
3.85 (97,8) 4.09 (103,9) 0.12 (3,0) 1.70 (2,5) 5.55 (141,0) 204 (62,2) 4300 (1950)
5 5 1/2 TC 4.74 (120,4) 5.04 (128,0) 0.15 (3,8) 2.60 (3,9) 6.25 (158,8) 252 (76,8) 6500 (2948)
6 6 /85
5.50 (139,7) 5.85 (148,6) 0.18 (4,6) 3.20 (4,8) 7.35 (186,7) 293 (89,3) 8800 (3992)
6 6 5/8 5.93 (150,6) 6.31 (160,3) 0.19 (4,8) 3.50 (5,2) 7.35 (186,7) 316 (96,3) 10300 (4672)
8 8 /85
7.74 (196,6) 8.23 (209,0) 0.25 (6,4) 6.20 (9,2) 9.55 (242,6) 411 (125,3) 17400 (7893)

Series 1000 (6,9 MPa)(1) 1000@150°F (65.6°C), 900@180°F (82.2°C), 850@200°F (93.3°C)

2 2 /83
1.94 (49,3) 2.11 (53,6) 0.08 (2,0) 0.50 (0,7) 3.10 (78,7) 105 (32,0) 1400 (635)
2½ 2 7/8 2.37 (60,2) 2.57 (65,3) 0.10 (2,5) 0.80 (1,2) 3.55 (90,2) 128 (39,0) 2200 (998)
3 3 /21
2.94 (74,7) 3.19 (81,0) 0.13 (3,3) 1.20 (1,8) 4.40 (111,8) 160 (48,8) 3400 (1542)
4 4 /21
3.85 (97,8) 4.20 (106,7) 0.18 (4,6) 2.30 (3,4) 5.65 (143,5) 210 (64,0) 6300 (2858)
5 5 1/2TC 4.74 (120,4) 5.15 (130,8) 0.20 (5,1) 3.30 (4,9) 6.45 (163,8) 257 (78,3) 8900 (4037)
6 6 /85
5.50 (139,7) 5.97 (151,6) 0.24 (6,1) 4.10 (6,1) 7.45 (189,2) 299 (91,1) 12000 (5443)
6 6 /85
5.93 (150,6) 6.45 (163,8) 0.26 (6,6) 4.70 (7,0) 7.60 (193,0) 322 (98,1) 14000 (6350)
8 8 /85
7.74 (196,6) 8.40 (213,4) 0.33 (8,4) 8.00 (11,9) 9.75 (247,7) 420 (128,0) 23800 (10796)

Series 1250 (8,6 MPa)(1) 1250@150°F (65.6°C), 1100@180°F (82.2°C), 1050@200°F (93.3°C)

2 2 3/8 1.94 (49,3) 2.15 (54,6) 0.11 (2,8) 0.70 (1,0) 3.15 (80,0) 108 (32,9) 1900 (862)
2½ 2 /8
7
2.37 (60,2) 2.63 (66,8) 0.13 (3,3) 1.00 (1,5) 3.65 (92,7) 132 (40,2) 2900 (1315)
3 3 /21
2.94 (74,7) 3.26 (82,8) 0.16 (4,1) 1.50 (2,2) 4.35 (110,5) 163 (49,7) 4300 (1950)
4 4 1/2 3.85 (97,8) 4.26 (108,2) 0.21 (5,3) 2.70 (4,0) 5.75 (146,1) 213 (64,9) 7500 (3402)
6 6 /85
5.50 (139,7) 6.09 (154,7) 0.30 (7,6) 5.30 (7,9) 7.60 (193,0) 305 (93,0) 15300 (6940)
6 7 5.93 (150,6) 6.58 (167,1) 0.32 (8,1) 6.10 (9,1) 8.10 (205,7) 329 (100,3) 17800 (8074)
8 9 5/8 7.74 (196,6) 8.57 (217,7) 0.42 (10,7) 11.50 (17,1) 11.15 (283,2) 429 (130,8) 30200 (13699)

Series 1500 (10,3 MPa)(1) 1500@150°F (65.6°C), 1350@180°F (82.2°C), 1250@200°F (93.3°C)

11/2 1.90 1.44 (36,6) 1.67 (42,4) 0.11 (2,8) 0.60 (0,9) 2.70 (68,6) 83 (25,3) 1500 (680)
2 2 /83
1.94 (49,3) 2.24 (56,9) 0.15 (3,8) 0.90 (1,3) 3.30 (83,8) 112 (34,1) 2700 (1225)
2½ 2 /87
2.37 (60,2) 2.75 (69,9) 0.19 (4,8) 1.40 (2,1) 3.75 (95,3) 138 (42,1) 4400 (1996)
3 3 1/2 2.94 (74,7) 3.40 (86,4) 0.23 (5,8) 2.10 (3,1) 4.45 (113,0) 170 (51,8) 6400 (2903)
4 4 /21
3.85 (97,8) 4.43 (112,5) 0.29 (7,4) 3.60 (5,4) 5.80 (147,3) 221 (67,4) 10700 (4854)
6 6 /8
5
5.50 (139,7) 6.33 (160,8) 0.42 (10,7) 7.20 (10,7) 7.74 (196,6) 317 (96,6) 21900 (9934)
6 7 5.93 (150,6) 6.83 (173,5) 0.45 (11,4) 8.20 (12,2) 8.20 (208,3) 342 (104,2) 25400 (11521)
8 9 5/8 7.74 (196,6) 8.75 (222,3) 0.51 (13,0) 13.90 (20,7) 11.80 (299,7) 437 (133,2) 37200 (16874)
TC - All products are integral joint unless indicated Threaded and Coupled

2
 SIZE NOMINAL PIPE DIMENSIONS Minimum Short-Term
Inside Outside Wall Pipe Connection Bending Tensile
Diameter Diameter Thickness Weight Diameter Radius Rating
Pipe Thread In (mm) In (mm) In (mm) Lbs/ft (kg/m) In (mm) Ft (m) Lbs (kgs)

Series 1750 (12,1 MPa)(1) 1750@150°F (65.6°C), 1600@180°F (82.2°C), 1500@200°F (93.3°C)

1 /21
1.90 1.44 (36,6) 1.71 (43,4) 0.13 (3,3) 0.60 (0,9) 2.70 (68,6) 85 (25,9) 1800 (816)
2 2 /8
3
1.94 (49,3) 2.31 (58,7) 0.19 (4,8) 1.20 (1,8) 3.35 (85,1) 116 (35,4) 3500 (1588)
2½ 2 7/8 2.37 (60,2) 2.81 (71,4) 0.22 (5,6) 1.70 (2,5) 3.76 (95,5) 141 (43,0) 5100 (2313)
3 3 /2
1
2.94 (74,7) 3.47 (88,1) 0.27 (6,9) 2.50 (3,7) 4.50 (114,3) 174 (53,0) 7500 (3402)
4 4 /2
1
3.85 (97,8) 4.55 (115,6) 0.35 (8,9) 4.30 (6,4) 5.95 (151,1) 227 (69,2) 13100 (5942)
6 6 5/8 5.50 (139,7) 6.35 (161,3) 0.42 (10,7) 7.40 (11,0) 7.92 (201,2) 317 (96,6) 22400 (10161)
6 7 5.93 (150,6) 6.86 (174,2) 0.46 (11,7) 8.60 (12,8) 8.40 (213,4) 343 (104,5) 26200 (11884)
8 9 /8
5
7.74 (196,6) 8.94 (227,1) 0.60 (15,2) 16.40 (24,4) 11.90 (302,3) 447 (136,2) 44600 (20231)

Series 2000 (13,8 MPa)(1) 2000@150°F (65.6°C), 1800@180°F (82.2°C), 1700@200°F (93.3°C)

1 /21
1.90 1.44 (36,6) 1.74 (44,2) 0.15 (3,8) 0.70 (1,0) 2.75 (69,9) 87 (26,5) 2000 (907)
2 2 /8
3
1.94 (49,3) 2.36 (59,9) 0.21 (5,3) 1.30 (1,9) 3.40 (86,4) 118 (36,0) 4000 (1814)
2½ 2 7/8 2.37 (60,2) 2.86 (72,6) 0.25 (6,4) 1.90 (2,8) 3.85 (97,8) 143 (43,6) 5800 (2631)
3 3 /2
1
2.94 (74,7) 3.55 (90,2) 0.30 (7,6) 2.80 (4,2) 4.63 (117,6) 177 (53,9) 8700 (3946)
4 4 /2
1
3.85 (97,8) 4.64 (117,9) 0.40 (10,2) 4.90 (7,3) 6.10 (154,9) 232 (70,7) 15000 (6804)
6 7 5.50 (139,7) 6.48 (164,6) 0.49 (12,4) 9.00 (13,4) 8.80 (223,5) 324 (98,8) 26100 (11839)

Series 2500 (17,2 MPa)(1) 2500@150°F (65.6°C), 2250@180°F (82.2°C), 2100@200°F (93.3°C)

1 /21
1.90 1.44 (36,6) 1.84 (46,7) 0.20 (5,1) 1.00 (1,5) 2.84 (72,1) 92 (28,0) 2900 (1315)
2 2 3/8 1.94 (49,3) 2.46 (62,5) 0.26 (6,6) 1.70 (2,5) 3.60 (91,4) 123 (37,5) 5000 (2268)
2½ 2 /8
7
2.37 (60,2) 2.91 (73,9) 0.27 (6,9) 2.10 (3,1) 4.03 (102,4) 145 (44,2) 6300 (2858)
3 3 /2
1
2.94 (74,7) 3.61 (91,7) 0.34 (8,6) 3.20 (4,8) 4.85 (123,2) 181 (55,2) 9800 (4445)
3½ 4 1/2 3.33 (84,6) 4.11 (104,4) 0.39 (9,9) 4.60 (6,8) 6.50 (165,1) 205 (62,5) 12800 (5806)
4 5 /2
1
3.85 (97,8) 4.73 (120,1) 0.44 (11,2) 6.00 (8,9) 7.12 (180,8) 236 (71,9) 16800 (7620)

Series 3000 (20,7 MPa)(1) 3000@150°F (65.6°C), 2700@180°F (82.2°C), 2550@200 (93.3°C)

1 1/2 1.90 1.44 (36,6) 1.92 (48,8) 0.24 (6,1) 1.20 (1,8) 2.98 (75,7) 96 (29,3) 3500 (1588)
2 2 /8
3
1.94 (49,3) 2.49 (63,2) 0.27 (6,9) 1.80 (2,7) 3.65 (92,7) 124 (37,8) 5400 (2449)
2½ 2 /8
7
2.37 (60,2) 3.03 (77,0) 0.33 (8,4) 2.70 (4,0) 4.46 (113,3) 152 (46,3) 8000 (3629)
3 4 1/2TC 2.94 (74,7) 3.77 (95,8) 0.41 (10,4) 4.90 (7,3) 7.00 (177,8) 188 (57,3) 12300 (5579)
3½ 4 /2
1
3.33 (84,6) 4.27 (108,5) 0.47 (11,9) 5.50 (8,2) 6.75 (171,5) 213 (64,9) 15800 (7167)
4 5 /2
1
3.85 (97,8) 4.93 (125,2) 0.54 (13,7) 7.40 (11,0) 7.47 (189,7) 247 (75,3) 25300 (11476)
TC - All products are produced integral joint unless indicated Threaded and Coupled

NOTE: Additional pressure classes are available on request.

SERIES PRESSURE (API 15HR) - Based on minimum

(1)

wall thickness dimensions and API 15HR Edition 3, for

a 20 year life expectancy. API monogrammable pipe
available on request.

3
Joining System Information (API 8rd Thread)
Joining System
1½ 2 2½ 3 4 5 6 6 8 8
Pipe Size - Inches
Thread Size 1.90” 2 3/8” 2 7/8” 3 1/2” 4 1/2” 5 1/2” 6 5/8” 7” 8 5/8” 9 5/8”
EUE 10rd EUE 8rd EUE 8rd EUE 8rd EUE 8rd OD 8rd OD 8rd OD 8rd OD 8rd OD 8rd

• Pin Upset O.D. In 2.15 2.60 3.10 3.75 4.75 5.55 6.65 7.05 8.65 9.65
(mm) (54,6) (66,0) (78,7) (95,3) (120,7) (141,0) (168,9) (179,1) (219,7) (245,1)

• Thread Length In 2.36 2.94 3.25 3.50 3.88 4.75 4.25 4.88 4.85 5.13
(mm) (59,9) (74,7) (82,6) (88,9) (98,6) (120,7) (108,0) (124,0) (123,2) (130,3)

• Make Up Length Loss In 2.06 2.56 2.86 3.13 3.50 4.38 3.88 4.50 4.50 4.75
(mm) (52,4) (65,1) (73,0) (79,4) (88,9) (111,1) (98,4) (114,3) (114,3) (120,7)
API CONNECTIONS - All products are produced integral joint unless indicated (TC) Threaded and Coupled. All 11/2” EUE 10rd and 23/8” - 41/2” EUE 8rd API threads conform
to API 5B Table 14, 14th Edition (L4 is minimum) and all 51/2” - 95/8” OD 8rd casing thread conform to API 5B Table 7, 14th Edition (L4 is minimum).

Performance Ratings vs. Temperature Pipe Capacity

73.4° F 150° F 180° F 200° F Size Inside Diameter Capacity
ASTM D2992-B
(23°) C (65.6°) C (82.2°) C (93.3°) C
Pipe in (mm) Bbls/1,000 ft. (m3/km)
psi 26,353 22,203 20,578 19,494 1½ 1.44 (36,6) 2.01 (1,1)
11.4 Year Life,
LTHS 2 1.94 (49,3) 3.66 (1,9)
MPa (181,7) (153,1) (141,9) (134,4)
2½ 2.37 (60,2) 5.46 (2,8)

psi 26,004 21,404 19,602 18,401 3 2.94 (74,7) 8.40 (4,4)

20 Year Life, LTHS
(Long-Term Hydrostatic 3½ 3.33 (84.6) 10.77 (5.6)
Stress)
MPa (179,3) (147,6) (135,2) (126,9) 4 3.85 (97,8) 14.40 (7,5)
5 4.74 (120,4) 21.83 (11,4)
20 Year Life, LCL psi 24,596 20,335 18,666 17,554
(Lower Confidence
6 5.50 (139,7) 29.39 (15,3)
Limit) MPa (169,6) (140,2) (128,7) (121,0) 6 5.93 (150,6) 34.16 (17,8)
* 150° F and 180° F data are interpolated 8 7.74 (196,6) 58.20 (30,4)

National Oilwell Varco has produced this brochure for general information only, and it
is not intended for design purposes. Although every effort has been made to maintain
the accuracy and reliability of its contents, National Oilwell Varco in no way assumes
responsibility for liability for any loss, damage or injury resulting from the use of information
and data herein nor is any warranty expressed or implied. Always cross-reference the
bulletin date with the most current version listed at the web site noted in this literature.

®
The API QMS Registered mark is either a trademark or registered trademark of the
American Petroleum Institute in the United States and/or other countries 15HR-0001
LICENSEE Q1 RATED

North America South America Europe Asia Pacific Middle East

17115 San Pedro Avenue Estrada de Acesso à Zona P.O. Box 6, 4190 CA No. 7A, Tuas Avenue 3 P.O. Box 17324
Suite 200 Industrial Portuária de Suape, s/no. Geldermalsen, The Netherlands Jurong, Singapore 639407 Dubai, UAE
San Antonio, TX 78232 USA Recife, PE, Brazil 55.590-000 Phone: +31 345 587 587 Phone: +65 6861 6118 Phone: +971 4881 3566
Phone: +1 210 477 7500 Phone: +55 81 3501 0023

www.fgspipe.com • [email protected]

© 2015 National Oilwell Varco. All rights reserved.

OG8110ENG April 2015