Scribd
Upload
178 views4 pages

TLE

The document provides instructions for two learning tasks. The first task involves filling out a table with pictures of different embroidery techniques cut out from magazines or newspapers. A rubric is provided assigning points for the number of techniques included. The second task involves writing a short spoken poetry describing the proper usage of tools and materials. A rubric is also provided for this task assigning points for creativity, application of proper usage, and content. Safety tips are then provided when using common household tools like hammers, screwdrivers, stepladders and hand saws. Proper maintenance and use of safety equipment is emphasized.

Uploaded by

Espano Faith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
178 views4 pages

TLE

The document provides instructions for two learning tasks. The first task involves filling out a table with pictures of different embroidery techniques cut out from magazines or newspapers. A rubric is provided assigning points for the number of techniques included. The second task involves writing a short spoken poetry describing the proper usage of tools and materials. A rubric is also provided for this task assigning points for creativity, application of proper usage, and content. Safety tips are then provided when using common household tools like hammers, screwdrivers, stepladders and hand saws. Proper maintenance and use of safety equipment is emphasized.

Uploaded by

Espano Faith
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Learning Task 2

In a short bond paper, fill up the table with pictures of different embroidery techniques from the
old magazine or newspaper or any avail-able materials at home. Follow the rubrics below.
RUBRICS
Cut at least 5 embroidery techniques/design 10
cut at least 3 embroidery techniques/design 6
cut at least 1 embroidery techniques /design 3

Embroidery Applique Calado Cross stitch Smocking


Learning Task 3: In a short bond paper, write a simple SPOKEN POETRY that will describe the
proper usage of tools and materials.

Safety first! Whenever taking on a project that involves manual labor, there’s
always an inherent risk of bodily harm. Here are a few simple steps you can
take to protect yourself.
Use insulated tools – This is of utmost importance if you’re going to be
working with or near electricity. Insulated tools have rubber handles that
protect from electric shock and provide easier grip. Not sure if your tools are
insulated? Then assume they aren’t! If they are, they will have the universal
“1,000 Volts” symbol on the handle, so check before you begin.
Hammers aren’t screwdrivers – Use each tool how it’s meant to be used.
Don’t cut corners by using a wrench handle as a hammer or using a
screwdriver as a pry bar. Improperly using tools like this is not only
dangerous, but it’s also bad for the durability of your tools.
Always wear safety gear – When taking on a project, always wear safety
glasses. If you’re doing heavy lifting, consider a lifting belt and gloves.
Assess each step of your project and anticipate the necessary safety
equipment before you begin.
Proper maintenance – Ensure that your tools are sturdy and in working order
before you begin. You may think a sharp saw or knife sounds more
dangerous than a dull one, but dull blades actually cause more accidents
because of their propensity to slip.
How To Use Common Household Tools
Hammer – When using a hammer, the further back you hold the handle, the
more force you’ll put on the object. So, if you’re hammering a nail, start with
precise, lighter hits while gripping the handle close to the hammer’s head.
Once the nail is in place, drive it in by gripping the hammer at the handle’s
end. Swing from the wrist for control and from the elbow for power. The
material you’re working with may require a different type of hammer/mallet.
Screwdriver – First, make sure you have the correct type of head and size
that matches the screws you’re working with – phillips, flat, torque, etc. Grip
the handle with one hand and grip the tip of the screwdriver, near the screw,
with the other. Apply force and twist until the screw catches a grip, then
ensure it goes in straight.
Stepladder – Never set up a stepladder on uneven ground. Always ensure
the hinged metal braces are completely straight and locked in. Heed the
printed warning on the stepladder to not step higher than recommended!
Standing higher than that point increases the odds that you will topple. Do
not leave tools on the ladder. The last thing anyone needs is a heavy
wrench falling onto their head. Read “8 Tips to Prevent Stepladder
Accidents.”
Hand Saws – First, make sure the saw is sharpened, the blade is straight
and has the proper amount of tension. This will make your life easier and
your work cleaner. Before you start hacking away, be sure to measure
(check it twice!) and draw a pencil line on the place you’re going to cut.
Make one soft, perfectly straight cut along the line, hold your elbows in by
your side and angle the saw properly. Then proceed to slowly saw all the
way through along the cut you’ve just made.
The hazards involved with hand tools may be overlooked, but they are
commonly used and can cause serious injury. Don’t miss tips on safety and
selecting the best tool in our blog, “Working Safely with Hand Tools.”

Rubrics:
Criteria Points
Creativity and originality 1
Application of proper usage of tools and materials 2
Content 2
Total 5

Care and maintenance of tools are significant


Complying to safety measures is always a must
Rubber in your tools, protects your delicate fingers
Not sure if not insulated, 1000 volts should be indicated
Tools have different purpose and function
Use them properly to avoid injuries
Hammer, screwdriver, or handsaw
Should be kept in good condition
Needles, pins and shears
Must be put out of reach of little children
Sewing box and pin cushion is waving!
Examine each tool for damage
Knowing the instructions to use is advantage
Always wear personal protective equipment
Gloves, thimble and mask
Never use a tool unless you are trained
Now you have a new knowledge gained

You might also like