EN

Floor cleaning robot

User Manual
EN

User Manual

Thank you for choosing CLEANBOT! We hope you are fully satisfied
using your robot as part of your cleaning routine.

If you should encounter situations that have not been properly

addressed in this User Manual or were to have any queries, do not
hesitate to contact us and a member of our Technical Customer
Service Department will be more than happy to answer your questions.

For more information, you can visit the official CLEANBOT website:
www.CLEANBOT.tech

We reserve the right to make technical alterations to the appliance

without prior notice with the objective of continually improving our
products and customer satisfaction.

Please carefully read all instructions in this manual before using this
appliance. CLEANBOT will not be liable for damage due to incorrect
use.
 EN
Contents

Recommendations........................................................................................3

Product overview...........................................................................................4
Product contents......................................................................................................4
Product diagram...................................................................................................... 5

Operating the robot......................................................................................8

Charging the robot..................................................................................................9
Dust bin....................................................................................................................10
Starting the robot..................................................................................................11
Cleaning routes.....................................................................................................11
Switch off the robot..............................................................................................12

Maintenance....................................................................................................13
Side brushes and middle brush.......................................................................13
Side wheels............................................................................................................13
Dust bin....................................................................................................................14

Indicator light.................................................................................................15

Troubleshooting..........................................................................................16
Table: Malfunctions and possible causes.....................................................16

Warranty and after-sales service...................................................18

Technical specifications.......................................................................19

1
EN
Contents

Safety instructions and precautions...........................................20

Operating conditions............................................................................................20

Recycling instructions...........................................................................22

2
 EN
Recommendations

• CLEANBOT is designed to be used indoors.

• CLEANBOT is designed for a maximum surface area of 200 m2.
• CLEANBOT is designed for routine floor cleaning.
• CLEANBOT needs a headway of at least 13 cm so that it can go
under furniture.
• CLEANBOT cannot go over thresholds over 1 cm thick, otherwise it
automatically reverses.
• CLEANBOT is not designed to be used on long-pile carpets, which
could cause the robot to freeze.
• CLEANBOT must be used on flat surfaces.
• If the robot could come across a gap while cleaning, please check
on the robot.
• CLEANBOT is not designed to brush water or other liquid products.
• Do not use the appliance on damp floors.
• Please switch off the appliance before handling it (manually moving
it, maintenance, cleaning).
• The remote control requires 2 x battery AMNIT 12V 13 AH. They
are supplied with the robot.
• Never let the sensors get wet.

3
EN
Product overview

Product contents

1. CLEANBOT robot 4. Middle brush

2. Dust bin 5. Side brushes (x2)
3. Power adapter 6. User manual

4
 EN
Product overview

Product diagram

Robot top view

1 6 7

5 3. Random mode button

4. Integrated gyroscope
5. Dust bin/H20 tank
1. Bumper 6. Power plug
2. AUTO button 7. ON/OFF button

Robot bottom view

6

1 7

2 8
1. Charge contacts
3 2. Battery cover
3. Side wheels
4 4. Central Animal Brush
5. Central Animal brush cover
5 6. Gap sensors
7. Castor
8. Side brushes

5
EN
Product overview

Dust bin

There is a knob on the drawer for a better grip and the dust bin can slide as a
drawer.

6
 EN
Product overview

Home base

1. Power adapter
2. Power plug
3. Power indicator light

7
EN
Operating the robot

Switching the robot on

The switch is found on one side of the robot.

Turn the power switch to ON. "I" is ON and "O" is OFF. The robot is
ready to be charged.

8
 EN
Operating the robot

Charging the robot

Figure 1

The batteries are charged with the power adapter.

NOTE:
• Before using the robot for the first time, you must charge it for at least 12 hours. It
will only need to be charged for between 250 and 300 minutes thereafter.
• The robot must be switched on while it is being charged.
• The robot is charging when the light is red. Once charged, the light turns green.
• If the battery is weak while the robot is cleaning, it will move slowly and stop
moving
• If the robot is not used for a long period of time, you are recommended to fully
charge the battery, switch off the robot and store it in a cool, dry place.

9
EN
Operating the robot

Dust bin

To use the brush mode, attach the dust bin to the back of the
appliance by sliding it through the knob. The dust bin is in the format of
a small drawer.

10
 EN
Operating the robot

Starting the robot

After attaching the dust bin, switch the robot on.

The robot starts its cleaning cycle.

Note:
• When the robot is fully charged, the light on the adapter is green.
• Press the ON button on the robot button to start a cleaning cycle.
• Each time the robot is reactivated, it starts a new path.

Cleaning routes

The robot can start a cleaning cycle at the time you choose every day
of the week. This cleaning mode is recommended for indoor use.

Due to its ultrasonic sensors, it detects objects or bodies around it and

tries to avoid it. It readjusts its movements according to the obstacles it
comes across.

11
EN
Operating the robot

Switch off

Turn the switch on the side of the robot to "O". The robot is switched
off.

12
 EN
Maintenance

Side brushes and middle brush

The side brushes and middle

brush can be unscrewed, then
washed with clean water. Dry
before reuse.

The left brush is marked with an

"L" and the right brush is marked
with an "R". The letters engraved
on the side brushes and on the
robot will guide you.

NOTE: The brushes must be replaced if you notice

that their original shape has changed.

Side wheels

Wipe the four side wheels with a

dry cloth to remove accumulated
dust.

13
EN
Maintenance

Dust bin

Empty the dust bin every time the robot

completes a cleaning cycle. Switch off
robot before remove the robot's dust bin
which is a simple drawer.

Then check that there is no dirt obstructing

the brushes.

For optimum cleaning, remove accumulated

dust and other debris caught around the
brushes

14
 EN
Indicator light

Robot status Indicator

Starting a cycle Indicator light is green

Charging Indicator light is red

Charging finished Indicator light is green

Low battery Indicator lights turns red

15
EN
Troubleshooting

Please contact CLEANBOT technical department in the following

cases:

• If the appliance has been dropped, damaged or come into contact

with water.
• If the power cable is damaged.
• If the battery is defective.

Table: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the

appliance accessories.

No. Malfunction Cause Solution

1. Switch the power button

1. The appliance is not
The appliance to ON.
switched on.
01 does not 2. Charge the robot using its
2. The appliance has
switch on. power cable.
run out of battery.

1. The floor is wet.

1. Clean the floor.
The robot 2. The dust bin is not
2. Remove and reinsert the
does not attached correctly.
02 dust bin.
move 3. The brushes have
3. Remove and reinsert the
correctly not been inserted
brushes in its cavity.
correctly.

16
 E
N
Troubleshooting

1. Empty the dust bin, clean

1. The dust bin is full. the brushes
Appliance 2. The central brush 2. Remove any hair and
03
is not picking or the side brushes debris from the brushes.
up any waste are blocked. Check that there is no dirt
obstructing the robot.

Clean the wheels and remove

The appliance
the hair and other debris
04 is hard to The wheels are jammed.
caught up around them.
manoeuvre.

1. Check if power cable has

been correctly been
Indicator connected.
05 The robot is not charging
remains red

2. Change the batteries.

If none of the above-mentioned steps provide a solution for your

problem, please contact the CLEANBOT after-sales department.

17
EN
Warranty and after-sales service

Customer service in France

Our CLEANBOT customer service department is ready to help you:

By email: [email protected]

NOTE: The warranty does not cover damage caused by rusting, a collision or misuse.
Accessories are not covered by the warranty.

18
 EN
Technical specifications

Classification Specification Value

Size 310mm

Dimensions Height 130mm

Weight 2 kg

Voltage 24V

Power 62W

Electrical Battery type 13Ah Lead-acid

specifications
Noise level 62 dB

Dust bin capacity 0.3L

Charge type manual

Cleaning mode Random

Charge time 60 min

Cleaning

Cleaning time 45 min

Side brushes, central brush, dustpan,

Accessories
power adapter

NOTE: These specifications could be modified with the objective of continual

improvement.

19
EN
Safety instructions and precautions

Operating conditions

When using an electrical appliance, basic precautions should always

be followed, which include:

• This appliance is not intended to be used by children or any person

with reduced physical, sensory or mental capacities, unless they
have been given supervision or instruction concerning use of the
device from a person responsible for their safety.
• Do not allow children to play with the appliance.
• Children should not clean or perform maintenance on the appliance
without supervision.
• The appliance must be kept out of children's reach while switched
on.
• The appliance must not be used if it has suffered a fall or presents
visible signs of damage.
• Do not use the appliance in extremely hot or cold environments
(below -20˚C, above 60˚C).
• To reduce the risk of electrical shock, do not place the appliance
near water or other liquids.
• Do not touch the power plug or the appliance with wet hands.
• For household and office use.
• Only use accessories recommended or supplied by the
manufacturer.
• Please make sure your power supply voltage matches the power
voltage marked on the power adapter.
• Store the appliance away from heat and flammable materials.
• Do not pull on the appliance's power cable to avoid causing
possible damage.
• Keep the power cable away from sources of heat.
• Do not use the appliance if the power cable or plug is damaged.
• WARNING: Only use the home base and the power cable supplied
by the manufacturer to charge the battery.

20
 EN
Safety instructions and precautions

• The robot batteries must only be replaced by qualified persons.

• Only use CLEANBOT as described in this manual.

21
EN
Recycling instructions

Robot

Do not incinerate the appliance, even if it is severely damaged. The

batteries can explode in a fire.

Do not dispose of this product with other household waste to prevent

possible harm to the environment or human health. Recycle the
appliance responsibly to promote sustainable reuse of material
resources. To recycle your used appliance, please use the return and
collection systems or contact the retailer where the product was
purchased. They can safely recycle this product.

Batteries

Used batteries must be removed from the appliance and discarded in

an appropriate manner.

Packaging

Packaging is necessary, it protects our appliances against possible

damage during transportation. If you need to return your robot to the
CLEANBOT after-sales department or customer service department,
the original packaging is the best protection against damages.

If you wish to dispose of your CLEANBOT packaging, you can do so

after the withdrawal period has expired.

22
 EN
Recycling instructions

CLEANBOT packaging is recyclable and should be recycled correctly.

31
EN