Vector Calculus Book

January 15, 2009 Version
Multivariable and Ve tor Cal ulus

David A. SANTOS [email protected]
ree to photocopy and distribute
Mathesis iuvenes tentare rerum quaelibet ardua semitasque non usitatas pandere docet.
ii
Copyright c 2007 David Anthony SANTOS. Permission is granted to

copy, distribute and/or modify this document under the terms of the
GNU Free Documentation License, Version 1.2 or any later version
published by the Free Software Foundation; with no Invariant Sec-
tions, no Front-Cover Texts, and no Back-Cover Texts. A copy of the
license is included in the section entitled “GNU Free Documentation
License”.
Contents
Preface v
1 Vectors and Parametric Curves 1

1.1 Points and Vectors on the Plane . . . . . . . . . . . . . . . . . . . . 1
1.2 Scalar Product on the Plane . . . . . . . . . . . . . . . . . . . . . . 11
1.3 Linear Independence . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.4 Geometric Transformations in two dimensions . . . . . . . . . . . . 17
1.5 Determinants in two dimensions . . . . . . . . . . . . . . . . . . . 25
1.6 Parametric Curves on the Plane . . . . . . . . . . . . . . . . . . . . 31
1.7 Vectors in Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1.8 Cross Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
1.9 Matrices in three dimensions . . . . . . . . . . . . . . . . . . . . . 58
1.10 Determinants in three dimensions . . . . . . . . . . . . . . . . . . . 62
1.11 Some Solid Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . 64
1.12 Cavalieri, and the Pappus-Guldin Rules . . . . . . . . . . . . . . . . 68
1.13 Dihedral Angles and Platonic Solids . . . . . . . . . . . . . . . . . . 70
1.14 Spherical Trigonometry . . . . . . . . . . . . . . . . . . . . . . . . 74
1.15 Canonical Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
1.16 Parametric Curves in Space . . . . . . . . . . . . . . . . . . . . . . 87
1.17 Multidimensional Vectors . . . . . . . . . . . . . . . . . . . . . . . 90
2 Differentiation 97
2.1 Some Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
2.2 Multivariable Functions . . . . . . . . . . . . . . . . . . . . . . . . 99
2.3 Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
2.4 Definition of the Derivative . . . . . . . . . . . . . . . . . . . . . . . 104
2.5 The Jacobi Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
2.6 Gradients and Directional Derivatives . . . . . . . . . . . . . . . . . 116
2.7 Levi-Civitta and Einstein . . . . . . . . . . . . . . . . . . . . . . . . 122
2.8 Extrema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
2.9 Lagrange Multipliers . . . . . . . . . . . . . . . . . . . . . . . . . . 129
3 Integration 133
3.1 Differential Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
3.2 Zero-Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
3.3 One-Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
3.4 Closed and Exact Forms . . . . . . . . . . . . . . . . . . . . . . . . 141
3.5 Two-Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
3.6 Change of Variables . . . . . . . . . . . . . . . . . . . . . . . . . . 155
3.7 Change to Polar Coordinates . . . . . . . . . . . . . . . . . . . . . . 162
3.8 Three-Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
iii
iv
3.9 Change of Variables . . . . . . . . . . . . . . . . . . . . . . . . . . 172

3.10 Surface Integrals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
3.11 Green’s, Stokes’, and Gauss’ Theorems . . . . . . . . . . . . . . . . 179
A Answers and Hints 186

Answers and Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
GNU Free Documentation License 250

1. APPLICABILITY AND DEFINITIONS . . . . . . . . . . . . . . . . . . . 250
2. VERBATIM COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
3. COPYING IN QUANTITY . . . . . . . . . . . . . . . . . . . . . . . . . 250
4. MODIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
5. COMBINING DOCUMENTS . . . . . . . . . . . . . . . . . . . . . . . . 251
6. COLLECTIONS OF DOCUMENTS . . . . . . . . . . . . . . . . . . . . 252
7. AGGREGATION WITH INDEPENDENT WORKS . . . . . . . . . . . . . 252
8. TRANSLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
9. TERMINATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
10. FUTURE REVISIONS OF THIS LICENSE . . . . . . . . . . . . . . . . 252
Preface
These notes started during the Spring of 2003. They are meant to be a gentle
introduction to multivariable and vector calculus.
Throughout these notes I use Maple version 10 commands in order to illus-

trate some points of the theory.
I would appreciate any comments, suggestions, corrections, etc., which can

be addressed to the email below.
David A. SANTOS
[email protected]
v
1 Vectors and Parametric Curves
1.1 Points and Vectors on the Plane
W e start with a naı̈ve introduction to some linear algebra necessary for the
course. Those interested in more formal treatments can profit by reading
[BlRo] or [Lan].
1 Definition (Scalar, Point, Bi-point, Vector) A scalar α ∈ R is simply a real num-

ber. A point r ∈ R2 is an ordered pair of real numbers, r = (x, y) with x ∈ R
and y ∈ R. Here the first coordinate x stipulates the location on the horizontal
axis and the second coordinate y stipulates the location on the vertical axis. See
figure 1.1. We will always denote the origin, that is, the point (0, 0) by O = (0, 0).
Given two points r and r′ in R2 the directed line segment with departure point
r and arrival point r′ is called the bi-point r, r′1 and is denoted by [r, r′ ]. See
figure 1.2 for an example. The bi-point [r, r′ ] can be thus interpreted as an arrow
starting at r and finishing, with the arrow tip, at r′ . We say that r is the tail
of the bi-point [r, r′ ] and that r′ is its head. A vector → −a ∈ R2 is a codification
′
of movement
" #of a bi-point: given the bi-point [r, r ], we associate to it the vector
−
→′ ′
x −x
rr = ′
stipulating a movement of x′ − x units from (x, y) in the horizon-
y −y
tal axis and "of #y ′ − y units from the current position in the vertical axis. The zero
→
− 0
vector 0 = indicates no movement in either direction.
0
Notice that infinitely many different choices of departure and arrival points
may give the same vector.
2 Example Consider the points
a1 = (1, 2), b1 = (3, −4), a2 = (3, 5), b2 = (5, −1), O = (0, 0) b = (2, −6).
1
Some authors use the terminology “fixed vector” instead of “bi-point.”
1
y axis
b
r′
b r = (x, y)
Points and Vectors on the Plane b
r
b
x axis
b
a2
2
Figure 1.1: A point
a in R .
b
Figure 1.2: A bi-point in R2 .
1
O b
b
b2
b
b1
b
b
Figure 1.3: Example 2.
Though the bi-points [a1 , b1 ], [a2 , b2 ] and [O, b] are in different locations on the
plane, they represent the same vector, as
" # " # " # " #
3−1 5−3 2−0 2
= = = .
−4 − 2 −1 − 5 −6 − 0 −6
The instructions given by the vector are all the same: start at the point, go two
units right and six units down. See figure 1.3.
In more technical language, a vector is an equivalence class of bi-points, that

is, all bi-points that have the same length, have the same direction, and point
in the same sense are equivalent, and the name of this equivalence is a vector.
As an simple example of an equivalence class, consider the set of integers Z.
According to their remainder upon division by 3, each integer belongs to one of
the three sets
3Z = {. . . , −6, −3, 0, 3, 6, . . .}, 3Z+1 = {. . . , −5, −2, 1, 4, 7, . . .}, 3Z+2 = {. . . , −4, −1, 2, 5, 8, . . .}.
The equivalence class 3Z comprises the integers divisible by 3, and for exam-
ple, −18 ∈ 3Z. Analogously,
" #
in example "2, the # bi-point [a1 , b1 ] belongs to the
2 2
equivalence class , that is, [a1 , b1 ] ∈ .
−6 −6
Free to photocopy and distribute 2

Chapter 1
−→
3 Definition The vector Oa that corresponds to the point a ∈ R2 is called the
position vector of the point a.
←→
4 Definition Let a 6= b be points on the plane and let ab be the line passing
through a and b. The direction of the bi-point [a, b] is the direction of the line
←→
L, that is, the angle θ ∈ [0; π[ that the line ab makes with the positive x-axis
(horizontal axis), when measured counterclockwise. The direction of a vector
→
− →
−
v 6= 0 is the direction of any of its bi-point representatives. See figure 1.4.
←→
5 Definition We say that [a, b] has the same direction as [z, w] if ab = ← → We
zw.
say that the bi-points [a, b] and [z, w] have the same sense if they have the same
direction and if when translating one so as to its tail is over the other’s tail, both
their heads lie on the same half-plane made by the line perpendicular to then at
their tails. They have opposite sense if they have the same direction and if when
translating one so as to its tail is over the other’s tail, their heads lie on different
half-planes made by the line perpendicular to them at their tails. . See figures 1.5
and 1.6 . The sense of a vector is the sense of any of its bi-point representatives.
Two bi-points are parallel if the lines containing them are parallel. Two vectors
are parallel, if bi-point representatives of them are parallel.
B B B
D
A A A
b θ C C
Figure 1.4: Direction of a Figure 1.5: Bi-points Figure 1.6: Bi-points

bi-point with the same sense. with opposite sense.
☞ Bi-point [b, a] has the opposite sense of [a, b] and so we write

[b, a] = −[a, b].
−
→ −
→
Similarly we write, ab = −ba.
6 Definition The Euclidean length or norm of bi-point [a, b] is simply the distance
between a and b and it is denoted by
È
||[a, b]|| = (a1 − b1 )2 + (a2 − b2 )2 .

Points and Vectors on the Plane
A bi-point is said to have unit length if it has norm 1. The norm of a vector is the
norm of any of its bi-point representatives.
☞ A vector is completely determined by three things: (i) its norm, (ii) its direc-
tion, and (iii) its sense. It is clear that the norm of a vector satisfies the following
properties:
−
1. →
a ≥ 0.
− →
−
2. →
a = 0 ⇐⇒ → −a = 0.
" #
− È √ √
1
7 Example The vector →
−
v = √ has norm →
v = 12 + ( 2)2 = 3.
2
8 Definition If →
−
u and →
−
v are two vectors in R2 their vector sum →
−
u +→
−
v is defined
by the coordinatewise addition
" # " # " #
→
− u1 v1 u1 + v1
u +→
−
v = + = . (1.1)
u2 v2 u2 + v2
−2→
−
u
B →
− →
−
→
− v u
u
A
→
− C
u +→
−
v
1→−
u
2
Figure 1.7: Addition of Vectors. Figure 1.8: Scalar multiplication of vectors.
It is easy to see that vector addition is commutative and associative, that

→
−
the vector 0 acts as an additive identity, and that the additive inverse of → −a
→
−
is − a . To add two vectors geometrically, proceed as follows. Draw a bi-point
representative of →
−
u . Find a bi-point representative of →−v having its tail at the tip
of u . The sum u + v is the vector whose tail is that of the bi-point for →
→
− →
− →
− −u and
→
− →
− −→ →
− −→
whose tip is that of the bi-point for v . In particular, if u = AB and v = BC,
then we have Chasles’ Rule:
−→ −→ −→
AB + BC = AC. (1.2)
See figures 1.7, 1.9, 1.10, and 1.11.

Chapter 1
9 Definition If α ∈ R and →
−
a ∈ R2 we define scalar multiplication of a vector and a
scalar by the coordinatewise multiplication
" # " #
a1 αa1
α→
−
a =α = . (1.3)
a2 αa2
It is easy to see that vector addition and scalar multiplication satisfies the
following properties.
→
− →
−
➊ α(→ −a + b ) = α→−a +αb
➋ (α + β)→ −a = α→−a + β→−a
➌ 1→
−a =→−
a
➍ (αβ)→
−
a = α(β →
−
a)
−v
→
−v
→
−w
+ →
→
−w
→
−
→
−
v
+ →
→
v +→
−
−
−v −
w
−
v
+ →
w
w−
w→
−
→
u→
→
→
−
−
−
w
v
→
→
−
−
→
−
v
−
→
−
→
v )+ w
(u +
−)
→
(
−
→v +w
−v
→ −
→
u + −
→
w
Figure 1.9: Commutativity Figure 1.10: Associativity Figure 1.11: Difference
→
−
10 Definition Let →−
u =6 0 . Put"R→
−
u# = {λ→−
u : λ ∈ R} and let a ∈ R2 , The affine
u1
line with direction vector →
−
u = and passing through a is the set of points on
u2
the plane
( ! )
x
a + R→
−
u = 2
∈ R : x = a1 + tu1 , y = a2 + tu2 , t∈R .
y
See figure 1.12.
If u1 = 0, the affine line defined above is vertical, as x is constant. If u1 6= 0,

then
x − a1 (x − a1 ) u2 u2
= t =⇒ y = a2 + u2 = x + a2 − a1 ,
u1 u1 u1 u1

u2
that is, the affine line is the Cartesian line with slope . Conversely, if y =
u1
mx + k is the equation of a Cartesian line, then
! " # !
x 1 0
= t+ ,
y m k
that# is, every Cartesian line is also an affine line and one may take the vector
"
1
as its direction vector. It also follows that two vectors →
−
u and →
−v are parallel
m
if and only if the affine lines R→−u and R→ −
v are parallel. Hence, →
−
u k →−
v if there
→
−
exists a scalar λ ∈ R such that u = λ v . →
−
☞ →
−
Because 0 = 0→
−
v for any vector →
− →
−
v , the 0 is parallel to every vector.
u→
−
b
r = a + t→
−
u
b
a
Figure 1.12: Parametric equation of a line on the plane.
" #
1
11 Example Find a vector of length 3, parallel to →
−
v = √ but in the opposite
2
sense.
− √ →
−
v
Solution: ◮ Since → v = 3, the vector → has unit norm and
−
v
has the same direction and sense as →
−
v , and so the vector sought is
" # " √ #
→
−
v 3 1 − 3
−3 → = − √ √ = √ .
−
v 3 2 − 6

Chapter 1
!
1
12 Example Find the parametric equation of the line passing through and
−1
" #
2
in the direction of the vector .
−3
Solution: ◮ The desired equation is plainly

! ! " #
x 1 2
= +t =⇒ x = 1 + 2t, y = −1 − 3t, t ∈ R.
y −1 −3
Some plane geometry results can be easily proved by means of vectors. Here
are some examples.
−→ −→
13 Example Given a pentagon ABCDE, determine the vector sum AB + BC +
−→ −→ −→
CD + DE + EA.
Solution: ◮ Utilising Chasles’ Rule several times:

→
− −→ −→ −→ −→ −→ −→
0 = AA = AB + BC + CD + DE + EA.
.◭
14 Example Consider a △ABC. Demonstrate that the line segment joining the
midpoints of two sides is parallel to the third side and it is in fact, half its length.
Solution: ◮ Let the midpoints of [A, B] and [C, A], be MC and MB ,

−→ −−−−→
respectively. We will demonstrate that BC = 2MC MB . We have,
−−−→ −→ −−−→ −→
2AMC = AB and 2AMB = AC. Therefore,
−→ −→ −→
BC = BA + AC
−→ −→
= −AB + AC
−−−→ −−−→
= −2AMC + 2AMB
−−−→ −−−→
= 2MC A + 2AMB
−−−→ −−−→
= 2(MC A + AMB )
−−−−→
= 2MC MB ,
as we were to shew. ◭
15 Example In △ABC, let MC be the midpoint of [A, B]. Demonstrate that

−−−→ 1 −→ −→
CMC = CA + CB .
2

−−−→ −−−→
Solution: ◮ As AMC = MC B, we have,
−→ −→ −−−→ −−−→ −−−→ −−−→
CA + CB = CMC + MC A + CMC + MC B
−−−→ −−−→ −−−→
= 2CMC − AMC + MC B
−−−→
= 2CMC ,
from where the result follows. ◭
16 Example If the medians [A, MA ] and [B, MB ] of the non-degenerate △ABC

intersect at the point G, demonstrate that
−→ −−−→ −→ −−−→
AG = 2GMA ; BG = 2GMB .
See figure 1.13.
←−−→
Solution: ◮ Since the triangle is non-degenerate, the lines AMA and
←−→ −→
BMB are not parallel, and hence meet at a point G. Therefore, AG and
−−−→ −→ −−−→
GMA are parallel and hence there is a scalar a such that AG = aGMA .
−→ −−−→
In the same fashion, there is a scalar b such that BG = bGMB . From
example 14,
−−−−→ −→
2MA MB = BA
−→ −→
= BG + GA
−−−→ −−−→
= bGMB − aGMA
−−−→ −−−−→ −−−→
= bGMA + bMA MB − aGMA ,
and thus
−−−−→ −−−→
(2 − b)MA MB = (b − a)GMA .
−−−−→ −−−→
Since △ABC is non-degenerate, MA MB and GMA are not parallel,
whence
2 − b = 0, b − a = 0, =⇒ a = b = 2.
◭
17 Example The medians of a non-degenerate triangle △ABC are concurrent.

The point of concurrency G is called the barycentre or centroid of the triangle.
See figure 1.13.

C
b
MB b b
MA Chapter 1
b
G
b b b
A B
MC
Solution: ◮ Let G be as in example 16. We must shew that the line

←−→ ←−→ ←−→
CMC also passes through G. Let the line CMC and BMB meet in G′ .
By the aforementioned example,
−→ −−−→ −→ −−−→ −−→′ −−−→ −−→′ −−−→
AG = 2GMA ; BG = 2GMB ; BG = 2G′ MB ; CG = 2G′ MC .
It follows that
−−→′ −→ −−→
GG = GB + BG′
−−−→ −−−→
= −2GMB + 2G′ MB
−−−→ −−−→
= 2(MB G + G′ MB )
−−→
= 2G′ G.
Therefore
−−→′ −−→ −−→ →
− −−→ →
−
GG = −2GG′ =⇒ 3GG′ = 0 =⇒ GG′ = 0 =⇒ G = G′ ,
demonstrating the result. ◭
Homework
Problem 1.1.1 Is there is any truth to the such that
statement “a vector is that which has mag- −
→ −
→ −→ 1−→
nitude and direction”? IA = −3IB, JA = − JB,
3
and then demonstrate that for any arbitrary
Problem 1.1.2 ABCD is a parallelogram. point M on the plane
E is the midpoint of [B, C] and F is the mid- −−→ −−
→ −
→
point of [D, C]. Prove that MA + 3MB = 4MI
−→ −→ −→ and
−−→ −−→ −→
AC + BD = 2BC. 3MA + MB = 4MJ.
Problem 1.1.3 (Varignon’s Theorem) Use Problem 1.1.5 Find the Cartesian equa-
vector algebra in order to prove that in any tion corresponding to the line with paramet-
quadrilateral ABCD, whose sides do not ric equation
intersect, the quadrilateral formed by the
x = −1 + t, y = 2 − t.
midpoints of the sides is a parallelogram.
Problem 1.1.6 Let x, y, z be points on the

Problem 1.1.4 Let A, B be two points on plane with x 6= y and consider △xyz. Let Q
the plane. Construct two points I and J be a point on side [x, z] such that ||[x, Q]|| :

||[Q, z]|| = 3 : 4 and let P be a point on scalars α ≥ 0, β ≥ 0 with α + β = 1

[y, z] such that ||[y, P]|| : ||[P, Q]|| = 7 : 2. such that
Let T be an arbitrary point on the plane.
→
−
za = α→
−
zx + β →
−
zy.
1. Find rational numbers α and β such
−→ −
→ −
→
that TQ = αTx + β Tz.
3. The point a belongs to the interior
2. Find rational numbers l, m, n such
−→ −
→ −
→ −
→ of the triangle △xyz if and only if
that TP = lTx + m Ty + nTz. there exists scalars α > 0, β > 0 with
α + β < 1 such that
Problem 1.1.7 Let x, y, z be points on the →
−
plane with x 6= y. Demonstrate that za = α→
−
zx + β →
−
zy.
1. The point a belongs to the line ←→ if
xy
and only if there exists scalars α, β Problem 1.1.8 A circle is divided into
with α + β = 1 such that three, four equal, or six equal parts (figures
→
−
za = α→−
zx + β →
−
zy. 1.17 through 1.19). Find the sum of the
vectors. Assume that the divisions start or
2. The point a belongs to the line seg- stop at the centre of the circle, as suggested
ment [x; y] if and only if there exists in the figures.
→
−
a →
−
a →
−
a
→
− →
−
c d
→
− →
−
c →
−
c →
−
b b
→
−
b
Figure 1.14: [A]. Problem Figure 1.15: [B]. Problem Figure 1.16: [C]. Problem
1.1.8. 1.1.8. 1.1.8.
→
−
a →
−
a →
− →
−
b c
→
− →
− →
− →
− →
− →
−
c d c d a d
→
− →
− →
− →
−
e
b b f
Figure 1.17: [D]. Problem Figure 1.18: [E]. Problem Figure 1.19: [F]. Problem
1.1.8. 1.1.8. 1.1.8.

Chapter 1
1.2 Scalar Product on the Plane

We will now define an operation between two plane vectors that will provide a
further tool to examine the geometry on the plane.
18 Definition Let →
−
x ∈ R2 and →−y ∈ R2 . Their scalar product (dot product, inner
product) is defined and denoted by
→
−
x •→
−
y = x 1 y1 + x 2 y2 .
" # " #
1 →
− 3 →
−
19 Example If →
−
a = and b = , then →
−
a • b = 1 · 3 + 2 · 4 = 11.
2 4
The following properties of the scalar product are easy to deduce from the defini-
tion.
SP1 Bilinearity
(→
− y )•→
x +→
− −
z =→
−
x •→
−
z +→
−
y •→
−
z, →
−
x •(→
−
y +→
−
z)=→
−
x •→
−
y +→
−
x •→
−
z (1.4)
SP2 Scalar Homogeneity
(α→
−
x )•→
−
y =→
−
x •(α→
−
y ) = α(→
−
x •→
−
y ), α ∈ R. (1.5)
SP3 Commutativity
→
−
x •→
−
y =→
−
y •→
−
x (1.6)
SP4
→
−
x •→
−
x ≥ 0 (1.7)
SP5
→
− →
−
x •→
−
x = 0 ⇐⇒ →
−
x = 0 (1.8)
SP6 → p
−
x = →−
x •→
−
x (1.9)
→
−
b −→
−
a
→
−
a
→
−
b
Figure 1.20: Theorem 21.

Scalar Product on the Plane
→
−
20 Definition Given vectors → −a and b , we define the (convex) angle between them,
\ →
− →
−
denoted by (→ −
a , b ) ∈ [0; π], as the angle between the affine lines R→
−
a and R b .
→
−
21 Theorem Let →
−
a and b be vectors in R2 . Then
→
− →
− →
− \ →
−
a • b = ||→
−
a |||| b || cos (→
−
a , b ).
Proof: From figure 1.20, using Al-Kashi’s Law of Cosines on the length
of the vectors, and (1.4) through (1.9) we have
→
− →
− →
− \ →
−
|| b − →
−
a ||2 = ||→
−a ||2 + || b ||2 − 2||→−
a |||| b || cos (→
−
a, b)
→
− →
− →
− →
− \ →
−
⇐⇒ ( b − → −a )•( b − →−a ) = ||→ −
a ||2 + || b ||2 − 2||→−
a |||| b || cos (→−a, b)
→
− → − →
− →
− →
− \ →
−
⇐⇒ b • b − 2→ −a•b +→ −a •→
−a = ||→−a ||2 + || b ||2 − 2||→
−a |||| b || cos (→−a, b)
→
− →
− →
− →
− \ →
−
⇐⇒ || b ||2 − 2→ −a • b + ||→−a ||2 = ||→
−a ||2 + || b ||2 − 2||→−a |||| b || cos (→
−a, b)
→
− →
− \ →
−
⇐⇒ →
−
a • b = ||→
−
a |||| b || cos (→
−
a , b ),
as we wanted to shew. ❑
\ →
− π
Putting (→
−
a, b)= in Theorem 21 we obtain the following corollary.
2
22 Corollary Two vectors in R2 are perpendicular if and only if their dot product
is 0.
☞ →
−
It follows that the vector 0 is simultaneously parallel and perpendicular
to any vector!
23 Definition Two vectors are said to be orthogonal if they are perpendicular. If →

−
a
→
− →
− →
−
is orthogonal to b , we write a ⊥ b .
− →
→
− − →
−
24 Definition If →
−
a ⊥ b and →
a = b = 1 we say that →
−
a and b are or-
thonormal.
Since | cos θ| ≤ 1 we also have
25 Corollary (Cauchy-Bunyakovsky-Schwarz Inequality)

→− →− → −
− →
a • b ≤ a b .
→
−
Equality occurs if and only if →
−
a k b.

Chapter 1
" # " #
a1 →
− b1
If →
−
a = and b = , the CBS Inequality takes the form
a2 b2
|a1 b1 + a2 b2 | ≤ (a21 + a22 )1/2 (b21 + b22 )1/2 . (1.10)
26 Example Let a, b be positive real numbers. Minimise a2 + b2 subject to the

constraint a + b = 1.
Solution: ◮ By the CBS Inequality,

1
1 = |a · 1 + b · 1| ≤ (a2 + b2 )1/2 (12 + 12 )1/2 =⇒ a2 + b2 ≥ .
2
" # " #
a 1
Equality occurs if and only if =λ . In such case, a = b = λ, and
b 1
1
so equality is achieved for a = b = .◭
2
27 Corollary (Triangle Inequality)

→
− −
→ →
− →
−

a + b ≤ a + b .
Proof:
→
− →
− →
−
||→
−
a + b ||2 = (→
−a + b )•(→ −a + b)
→
− →
− →−
= →
−a •→
−a + 2→ −a•b + b•b
→
− →
−
≤ ||→
−a ||2 + 2||→−
a |||| b || + || b ||2
→
−
= (||→
−a || + || b ||)2 ,
from where the desired result follows. ❑
28 Example Let x, y, z be positive real numbers. Prove that

√ È È p
2(x + y + z) ≤ x2 + y 2 + y2 + z2 + z 2 + x2 .
" # " # " #

x → − y → z
Solution: ◮ Put →
−
a = , b = ,−
c = . Then
y z x
" #
x + y + z √
→
− →
− →
−
a + b + c = = 2(x + y + z).
x + y + z
Also,
→ → − È È p
− −
a + b + →
c = x2 + y 2 + y 2 + z 2 + z 2 + x2 ,

Scalar Product on the Plane
and the assertion follows by the triangle inequality

→ −
→
− →
− −
→ − → →
−
a + b + c ≤ a + b + c .
We now use vectors to prove a classical theorem of Euclidean geometry.
29 Definition Let A and B be points on the plane and let → −u be a unit vector.
−→ →
−
If AB = λ u , then λ is the directed distance or algebraic measure of the line
segment [AB] with respect to the vector →
−u . We will denote this distance by AB −
u,
→
→
−
or more routinely, if the vector u is patent, by AB. Observe that AB = −BA.
→ ←
← →
30 Theorem (Thales’ Theorem) Let D y D′ be two distinct lines on the plane. Let
←→ ←
→
A, B, C be distinct points of D , and A′ , B′ , C′ be distinct points of D′ , A 6= A′ ,
←→ ←→
B 6= B′ , C 6= C′ , A 6= B, A′ 6= B′ . Let AA′ k BB′ . Then
←−
→ ←→ AC A′ C ′
AA′ k CC′ ⇐⇒ = ′ ′.
AB AB
D D′ D′ D
b
C
A b b
A′
B b b
B′ A b b
A′
C b b
C′ B b b
B′
Figure 1.21: Thales’ Theorem. Figure 1.22: Corollary to Thales’ Theorem.
Proof: Refer to figure 1.2. On the one hand, because they are unit
vectors in the same direction,
−→ −→ −− → −− →
AB AC A′ B′ A′ C′
= ; = ′ ′.
AB AC A′ B ′ AC
On the other hand, by Chasles’ Rule,
−−→′ −→ −−→ −−→ −−→ −→ −−→
BB = BA + AA′ + A′ B′ = (A′ B′ − AB) + AA′ .
←−
→ ←→
Since AA′ k BB′ , there is a scalar λ ∈ R such that
−− → −→ −−→
A′ B′ = AB + λAA′ .

Chapter 1
Assembling these results,

−−→′ −→ −−→ −−→
CC = CA + AA′ + A′ C′
AC −→ −−→′ A′ C ′ −→ −−→
= − · AB + AA + ′ ′ AB + λAA′
AB AB
A′ C ′ AC −→ A′ C ′ −−→′
= − AB + 1 + λ ′ ′ AA .
A′ B ′ AB AB
←−
→ ←→
As the line AA′ is not parallel to the line AB, the equality above reveals
that
← −
→ ←→ AC A′ C ′
AA′ k CC′ ⇐⇒ − ′ ′ = 0,
AB AB
proving the theorem.❑
From the preceding theorem, we immediately gather the following corollary. (See
figure 1.2.)
←
→ ←
→
31 Corollary Let D and D′ are distinct lines, intersecting in the unique point C.
←
→ ←
→
Let A, B, be points on line D , and A′ , B ′ , points on line D′ . Then
←−
→ ←→ CB CB ′
AA′ k BB′ ⇐⇒ = .
CA CA′
1.3 Linear Independence

onsider now two arbitrary vectors in R2 , →
−x and → −
C
of →
−
x and →−
→
−
y , say. Under which condi-
tions can we write an arbitrary vector v on the plane as a linear combination
y , that is, when can we find scalars a, b such that
→
−
v = a→
−
x + b→
−
y ?
The answer can be promptly obtained algebraically. Operating formally,
→
−
v = a→
−
x + b→
−
y ⇐⇒ v1 = ax1 + by1 , v2 = ax2 + by2
v1 y2 − v2 y1 x1 v2 − x2 v1
⇐⇒ a= , b= .
x 1 y2 − x 2 y1 x 1 y2 − x 2 y1
The above expressions for a and b make sense only if x1 y2 6= x2 y1 . But, what
x1 x2
does it mean x1 y2 = x2 y1 ? If none of these are zero then = = λ, say, and
y1 y2
to " # " #
x1 y1
=λ ⇐⇒ → −
x k→ −
y.
x2 y2
→
−
If x1 = 0, then either x2 = 0 or y1 = 0. In the first case, →−x = 0 , and a fortiori
→
−x k →−
y , since all vectors are parallel to the zero vector. In the second case we
have
→
− →
− →
− →
−
x = x2 j , y = y2 j ,

Linear Independence
→
−
and so both vectors are parallel to j and hence →
−
x k→
−
y . We have demonstrated
the following theorem.
32 Theorem Given two vectors in R2 , →

−
x and →
−
y , an arbitrary vector →
−
v can be
written as the linear combination
→
−
v = a→
−
x + b→
−
y, a ∈ R, b∈R
if and only if →
−
x is not parallel to →
−
y . In this last case we say that →
−
x is linearly
→
−
independent from vector y . If two vectors are not linearly independent, then we
say that they are linearly dependent.
" # " #
1 1
33 Example The vectors and are clearly linearly independent, since one
0 1
" #
a
is not a scalar multiple of the other. Given an arbitrary vector we can express
b
it as a linear combination of these vectors as follows:
" # " # " #
a 1 1
= (a − b) +b .
b 0 1
Consider now two linearly independent vectors →−

x and → −y . For a ∈ [0; 1], a→
−
x
→
− →
−
is parallel to x and traverses the whole length of x : from its tip (when a = 1)
to its tail (when a = 0). In the same manner, for b ∈ [0; 1], b→
−y is parallel to →
−
y
→
− →
− →
−
and traverses the whole length of y . The linear combination a x + b y is also a
vector on the plane.
34 Definition Given two linearly independent vectors →−

x and →
−y consider bi-point
representatives of them with the tails at the origin. The fundamental parallelo-
gram of the the vectors →
−x and →−y is the set
{a→
−
x + b→
−
y : a ∈ [0; 1], b ∈ [0; 1]}.
(" # " #)
1 1
Figure 1.23 shews the fundamental parallelogram of ,
, coloured in
0 1
brown, and the respective tiling of the plane(by various
! !translations
! !)of it. Observe
0 1 1 2
that the vertices of this parallelogram are , , , . In essence
0 0 1 1
then, linear independence of two vectors on the plane means that we may obtain
every vector on the plane as a linear combination of these two vectors and hence

Chapter 1
cover the whole plane by all these linear combinations.
Figure 1.23: Tiling and the fundamental parallelogram.
Homework

1 −1 Problem 1.3.3 Consider the line with
Problem 1.3.1 Prove that and Cartesian equation L : ax + by = c, where
1 1
are linearly independent, and draw their not both of a, b are zero. Let t be a point
fundamental parallelogram. not on L. Find a formula for the distance
from t to L.
Problem
1.3.2 Write an arbitrary vector
Problem 1.3.4 Prove that two non-zero
a
on the plane, as a linear combination perpendicular vectors in R2 must be lin-
b early independent.

1 −1
of the vectors and .
1 1
1.4 Geometric Transformations in two dimensions
W e now are interested in the following fundamental functions of sets (fig-

ures) on the plane: translations, scalings (stretching or shrinking) reflex-
ions about the axes, and rotations about the origin. It will turn out that a handy
tool for investigating all of these (with the exception of translations), will be cer-
tain construct called matrices which we will study in the next section.

Geometric Transformations in two dimensions
First observe what is meant by a function F : R2 → R2 . This means that the

input of the function is a point of the plane, and the output is also a point on the
plane.
A rather uninteresting example, but nevertheless an important one is the
following.
35 Example The function I : R2 → R2 , I(x) = x is called the identity transforma-

tion. Observe that the identity transformation leaves a point untouched.
We start with the simplest of these functions.
2 2
36 Definition A function T→
v : R → R is said to be a translation if it is of the
−
form T→ →
− →
−
v (x) = x + v , where v is a fixed vector on the plane.
−
A translation simply shifts an object on the plane rigidly (that is, it does not
distort it shape or re-orient it), to a copy of itself a given amount of units from
where it was. See figure 1.24 for an example.
→
−
v
Figure 1.24: A translation. Figure 1.25: A scaling.
It is clear that the composition of any two translations commutes, that is, if
2 2
T→
v 1 , T→
− v 2 : R → R are translations, then T→
− v 1 ◦ T→
− − v 2 ◦ T→
v 2 = T→
− v 1 . For let
−
→
−
T1 (a) = a + v 1 and T→ →
−
v 2 (a) = a + v 2 . Then
−
− ◦ T→
(T→ − )(a) = T→ − (T→− (a)) = T→
→
− =a+→
− (a) + v
−v +→ −v ,
v 1 v 2 v 1 v 2 v 2 1 2 1
and
→
− →
− →
−
v 2 ◦ T→
(T→
− − v 2 (T→
v 1 )(a) = T→
− v 1 (a)) = T→
− v 1 (a) + v 2 = a + v 1 + v 2 ,
−
from where the commutativity claim is deduced.
37 Definition A!function Sa,b : R2 → R2 is said to be a scaling if it is of the form

ax
Sa,b (r) = , where a > 0, b > 0 are real numbers.
by
!! !
x 2x
Figure 1.25 shews the scaling S2,0.5 = .
y 0.5y

Chapter 1
It is clear that the composition of any two scalings commutes, that is, if
Sa,b , Sa′ ,b′ : R2 → R2 are scalings, then Sa,b ◦ Sa′ ,b′ = Sa′ ,b′ ◦ Sa,b . For
!! !
a′ x a(a′ x)
(Sa,b ◦ Sa′ ,b′ )(r) = Sa,b (Sa′ ,b′ (r)) = Sa,b = ,
b′ y b(b′ y)
and !! !
ax a′ (ax)
(Sa′ ,b′ ◦ Sa,b )(r) = Sa′ ,b′ (Sa,b (r)) = Sa′ ,b′ = ,
by b′ (by)
from where the commutativity claim is deduced.
Translations and scalings do not necessarily commute, however.

! For consider
→
− 2a1
the translation T→
− (a) = a + i and the scaling S2,1 (a) =
i
. Then
a2
!! !!! !! !
−1 −1 −2 −1
− ◦ S2,1 )
(T→ = T→
− S = T→
− = ,
i i i
0 0 0 0
but
!! !!! !! !
−1 −1 0 0
(S2,1 ◦ T→
−)
i
= S2,1 T→
−
i
= S2,1 = .
0 0 0 0
y axis
x axis
Figure 1.26: Reflexions. The original object (in the first quadrant) is yellow. Its reflexion
about the y-axis is magenta (on the second quadrant). Its reflexion about
the x-axis is cyan (on the fourth quadrant). Its reflexion about the origin is
blue (on the third quadrant).
38 Definition A function RH : R2 → R2 is said to be a!reflexion about the y-axis or

−x
horizontal reflexion if it is of the form RH (r) = . A function RV : R2 → R2
y

is said to be a!reflexion about the x-axis or vertical reflexion if it is of the form

x
RV (r) = . A function RO : R2 → R2 is said to be a reflexion about origin if
−y
!
−x
it is of the form RH (r) = .
−y
Some reflexions appear in figure 1.26.

A few short computations establish various commutativity properties among
reflexions, translations, and scalings. See problem 1.4.4.
We now define rotations. This definition will be somewhat harder than the
others, so let us develop some ancillary results.
È r with polar coordinates x = ρ cos α, y = ρ sin α as in figure

Consider a point
1.27. Here ρ = x2 + y 2 and α ∈ [0; 2π[. If we rotate it, in the levogyrate
sense, by an angle θ, we land on the new point x′ with x′ = ρ cos(α + θ) and
y ′ = ρ sin(α + θ). But
ρ cos(α + θ) = ρ cos θ cos α − ρ sin θ sin α = x cos θ − y sin θ,
and
ρ sin(α + θ) = ρ sin α cos θ + ρ sin θ cos α = y cos θ + x sin θ.
! !
x x cos θ − y sin θ
Hence the point is mapped to the point .
y x sin θ + y cos θ
y-axis

ρ cos(α + θ)
ρ sin(α + θ)
b

b
ρ cos α
ρ sin α
θ
α
b b
x-axis
Figure 1.27: Rotation by an angle θ in the levogyrate (counterclockwise) sense from the
x-axis.
We may now formulate the definition of a rotation.

Chapter 1
39 Definition A function Rθ : R2 → R2 is said to be a levogyrate rotation about the !

x cos θ − y sin θ
origin by the angle θ measured from the positive x-axis if Rθ (r) = .
x sin θ + y cos θ
È
Here ρ = x2 + y 2 .
Various properties of the composition of rotations with other plane transfor-

mations are explored in problems 1.4.5 and 1.4.6.
We now codify some properties shared by scalings, reflexions, and rotations.
40 Definition A function L : R2 → R2 is said to be a linear transformation from R2

to R2 if for all points a, b on the plane and every scalar λ, it is verified that
L(a + b) = L(a) + L(b), L(λa) = λL(a).
It is easy to prove that scalings, reflexions, and rotations are linear transfor-
mations from R2 to R2 , but not so translations.
41 Definition A function A : R2 → R2 is said to be an affine transformation from

R2 to R2 if there exists a linear transformation L : R2 → R2 and a fixed vector
→
−
v ∈ R2 such that for all points x ∈ R2 it is verified that
A(x) = L(x) + →
−
v.
It is easy to see that translations are then affine transformations, where for
the linear transformation L in the definition we may take I : R2 → R2 , the
identity transformation I(x) = x.
We have seen that scalings, reflexions and rotations are linear transforma-
tions. If L : R2 → R2 is a linear transformation, then
→
− →
− →
− →
−
L(r) = L(x i + y j ) = xL( i ) + yL( j ),
and thus a linear transformation from R2 to R2 is solely determined by the values

→
− →
−
L( i ) and L( j ). We will now introduce a way to codify these values.
42 Definition Let L : R2 → R2 be a linear transformation. The matrix AL associ-

L is the 2 × 2, !!
ated to!! (2 rows, 2 columns) array whose columns are (in this order)
1 0
L and L .
0 1
43 Example (Scaling Matrices) Let"a > 0,

# b > 0 be a real numbers. The matrix of
a 0
the scaling transformation Sa,b is . For
0 b
!! ! !
1 a·1 a
Sa,b = =
0 b·0 0

and
!! ! !
0 0·1 0
Sa,b = = .
1 b·1 b
44 Example (Reflexion
" Matrices)
# It is easy to verify that the matrix for the
" trans-
#
−1 0 1 0
formation RH is , that the matrix for the transformation RV is
0 1 0 −1
" #
−1 0
, and the matrix for the transformation RO is .
0 −1
45 Example
" (Rotating#Matrices) It is easy to verify that the matrix for a rotation
cos θ − sin θ
Rθ is .
sin θ cos θ
46 Example (Identity Matrix)"The matrix

# for the identity linear transformation Id :
1 0
R2 → R2 , Id(x) = x is I2 = .
0 1
2
47 Example (Zero Matrix) # matrix for the null linear transformation N : R →
" The
0 0
R2 , N(x) = O is 02 = .
0 0
From problem 1.4.7 we know that the composition of two linear transfor-
mations is also linear. We are now interested in how to codify the matrix of a
composition of linear transformations L1 ◦ L1 in terms of their individual matri-
ces.
" #
2 2 a b
48 Theorem Let L : R → R have the matrix representation AL = and
c d
" #
′ 2 2 r s
let L : R → R have the matrix representation AL′ = . Then the compo-
t u
sition L ◦ L′ has matrix representation
" #
ar + bt as + bu
.
cr + dt cs + du
!! !!
′ 1 ′ 0
Proof: We need to find (L ◦ L ) and (L ◦ L ) .
0 1

Chapter 1
We have
!! !!! !! ! ! !
′ 1 ′ 1 r →
− →
− a b ar + bt
(L◦L ) =L L =L = rL( i )+tL( j ) = r +t = ,
0 0 t c d cr + dt
and
!! !!! !! ! ! !
0 0 s →
− →
− a b as + bu
(L◦L′ ) = L L′ =L = sL( i )+uL( j ) = s +u = ,
1 1 u c d cs + du
" #
′ ar + bt as + bu
whence we conclude that the matrix of L ◦ L is , as
cr + dt cs + du
we wanted to shew.❑
The above motivates the following definition.

" # " #
a b r s
49 Definition Let A = and B = be two 2 × 2 matrices, and λ ∈ R
c d t u
be a scalar. We define matrix addition as
" # " # " #
a b r s a+r b+s
A+B = + = .
c d t u c+t d+u
We define matrix multiplication as

" #" # " #
a b r s ar + bt as + bu
AB = = .
c d t u cr + dt cs + du
We define scalar multiplication of a matrix as

" # " #
a b λa λb
λA = λ = .
c d λc λd
☞ Since the composition of functions is not necessarily commutative, neither

is matrix multiplication. Since the composition of functions is associative, so is
matrix multiplication.
50 Example Let " # " #

1 −1 1 2
M = , N = .
0 1 −2 1
Then
" # " # " #
2 1 2 −2 3 1
M +N = , 2M = , MN = .
−2 2 0 2 −2 1

51 Example Find a 2 × 2 matrix that will transform the square in figure 1.28 into
the parallelogram in figure 1.29. Assume in each case that the vertices of the
figures are lattice points, that is, coordinate points with integer coordinates.
" #
a b
Solution: ◮ Let be the desired matrix. Then since
c d
" #" # " #
a b 0 0
= ,
c d 0 0
!
0
the point is a fortiori, transformed to itself. We now assume, with-
0
out loss of generality, that each vertex of the square is transformed in
the same order, counterclockwise, to each vertex of the rectangle. Then
" #" # " # " # " #
a b 1 2 a 2
= =⇒ = =⇒ a = c = 2.
c d 0 2 c 2
Using these values,

" #" # " # " # " #
a b 1 1 a+b 1
= =⇒ = =⇒ b = −1, d = 1.
c d 1 3 c+d 3
And so the desired matrix is

" #
2 −1
.
2 1
◭
5 5
4 4
3 3
b
2 2
b
1 1
b
0 0
b
-1 -1
-2 -2
-3 -3
-4 -4
-4 -3 -2 -1 0 1 2 3 4 5 -4 -3 -2 -1 0 1 2 3 4 5
Figure 1.28: Example 51. Figure 1.29: Example 51.
Homework

Chapter 1

1 −1 Problem 1.4.7 Let L : R2 → R2 and L′ :
Problem 1.4.1 If A = , B = R2 → R2 be linear transformations. Prove
2 3
that their composition L ◦ L′ is also a linear
a b transformation.
and
1 −2
(A + B)2 = A2 + 2AB + B 2 , 5
4
find a and b. 3
2
Problem
1.4.2 Consider
△ABC
with A = 1
−1 0 2 0
, B = , C = , as in fig-
2 −2 1 -1
ure 1.30. Determine the the effects of the -2
following scaling transformations on the tri- -3
angle: S2,1 , S1,2 , and S2,2 . -4

-4 -3 -2 -1 0 1 2 3 4 5
Problem 1.4.3 Find the effects of the re- Figure 1.30: Problems 1.4.2, 1.4.8, and 1.4.3.
flexions R π , R π , R− π , and R− π on the
2 4 2 4
triangle in figure 1.30.
Problem 1.4.8 Find the effects of the re-
Problem 1.4.4 Prove that the composition flexions RH , RV , and RO on the triangle
of two reflexions is commutative. Prove that in figure 1.30.
the composition of a reflexion and a scaling
is commutative. Prove that the composition Problem 1.4.9 Find all matrices A ∈
of a reflexion and a translation is not nec- M2×2 (R) such that A2 = 02
essarily commutative.
Problem 1.4.5 Prove that the composition Problem 1.4.10 Find the image of the fig-
of two rotations on the plane Rθ and Rθ ′ ure below (consisting of two
circles
and a
satisfies 1 1
triangle) under the matrix .
−1 3
Rθ ◦ Rθ ′ = Rθ+θ ′ = Rθ ′ ◦ Rθ ,
2
and so the composition of two rotations on
the plane is commutative.
1
Problem 1.4.6 Prove that the composition

0
of a scaling and a rotation is not necessarily 0 1 2
commutative. Prove that the composition
of a rotation and a translation is not nec-
essarily commutative. Prove that the com-
position of a reflexion and a rotation is not
necessarily commutative. Figure 1.31: Problem 1.4.10.
1.5 Determinants in two dimensions
W e now desire to define a way of determining areas of plane figures on the

plane. It seems reasonable to require that this area determination agrees

Determinants in two dimensions
with common formulæ of areas of plane figures, in particular, the area of a par-
allelogram should be as we learn in elementary geometry and the area of a unit
square should be 1.

c
d b b b
b
b b

a
d
b b
b b b
a c
Figure 1.32: Area of a paral- ab c(2b+d)

Figure 1.33: (a + c)(b + d) − 2 · 2
−2 · 2
= ad − bc.
lelogram.
" #
a
From figures (1.32) and (1.33), the area of a parallelogram spanned by ,
b
" #
c
and is
d
" # " #!
a c
D , = ad − bc.
b d
This motivates the following definition.

" #
a c
52 Definition The determinant of the 2 × 2 matrix is
b d
" #
a c
det = ad − bc.
b d
Consider now a simple quadrilateral with vertices r1 = (x1 , y1 ), r2 = (x2 , y2 ),

r3 = (x3 , y3 ), r4 = (x4 , y4 ), listed in counterclockwise order, as in figure 1.34.
This quadrilateral is spanned by the vectors
" # " #
− x2 − x1 x4 − x1
r−→
1 r2 = , −
r−→
1 r4 = ,
y2 − y1 y4 − y1

Chapter 1
and hence, its area is given by

" #
x2 − x1 x4 − x1
A = det = D(→
−
r2 − →
−
r1 , →
−
r4 − →
−
r1 ).
y2 − y1 y4 − y1
Similarly, noticing that the quadrilateral is also spanned by

" # " #
− x4 − x3 x2 − x3
r−→
3 r4 = , −
r−→
3 r2 = ,
y4 − y3 y2 − y3
its area is also given by

" #
x4 − x3 x2 − x3
A = det = D(→
−
r4 − →
−
r3 , →
−
r2 − →
−
r3 ).
y4 − y3 y2 − y3
Using the properties derived in Theorem ??, we see that

A = 1
2
D(→
−
r2 − →
−
r1 , →
−
r4 − →
−
r1 ) + D(→
−
r4 − →
−
r3 , →
−
r2 − →
−
r3 )

= 1
2
D(→
−
r ,→
−
r ) − D(→
2 4
−
r ,→
−
r ) − D(→−
r ,→
2
−
r ) + D(→
1
−r ,→−
r ) 1 4 1 1

D(→
1
+2 −
r4 , →
−
r2 ) − D(→
−
r3 , →
−
r2 ) − D(→
−
r4 , →
−
r3 ) + D(→
−
r3 , →
−
r3 )

= 1
2
D(→
−
r ,→
−
r ) − D(→
2 4
−
r ,→
−
r ) − D(→ −
r ,→
2
−
r )) + 1 D(→
1
−
r ,→
−r ) − D(→
1
−
r ,→
4
−
r ) − D(→
−
r ,→
−
r )
2 4 2 3 2 4 3

= 1
2
D(→
−
r1 , →
−
r2 ) + D(→
−
r2 , →
−
r3 ) + D(→
−
r3 , →
−
r4 ) + D(→
−
r4 , →
−
r1 ) .
We conclude that the area of a quadrilateral with vertices (x1 , y1 ), (x2 , y2 ),

(x3 , y3 ), (x4 , y4 ), listed in counterclockwise order is
" # " # " # " #!
1 x1 x2 x2 x3 x3 x4 x4 x1
det + det + det + det . (1.11)
2 y1 y2 y2 y3 y3 y4 y4 y1
Similarly, to find the area of a triangle of vertices →

−
r1 = (x1 , y1 ), →
−
r2 = (x2 , y2 ),
→
−
r3 = (x3 , y3 ), listed in counterclockwise order, as in figure 1.35, reflect it about
one of its sides, as in figure 1.36, creating a parallelogram. The area of the
triangle is now half the area of the parallelogram, which, by virtue of 1.11, is
1
D(→
−
r1 , →
−
r2 ) + D(→
−
r2 , →
−
r ) + D(→
−
r ,→
−
r3 ) + D(→
−
r3 , →
−
r1 ) .
4
This is equivalent to
1 1
D(→
−
r1 , →
−
r2 ) + D(→
−
r2 , →
−
r3 ) + D(→
−
r3 , →
−
r1 ) − D(→
−
r1 , →
−
r2 ) − D(→
−
r2 , →
−
r ) − D(→
−
r ,→
−
r3 ) + D(→
−
r3 , →
−
r1 ) + 2D(→
−
r2 , →
−
r3 )
2 4
We will prove that
D(→
−
r1 , →
−
r2 ) − D(→
−
r2 , →
−
r ) − D(→
−
r ,→
−
r3 ) + D(→
−
r3 , →
−
r1 ) + 2D(→
−
r2 , →
−
r3 ) = 0.

To do this, we appeal once again to the bi-linearity properties derived in Theorem

??, and observe, that since we have a parallelogram, → −r −→ −
r3 = →−
r2 − →−
r1 , which
→
− →
− →
− →
−
means r = r3 + r2 − r1 . Thus
D(→
−
r1 , →
−
r2 ) − D(→
−
r2 , →
−
r ) − D(→
−
r ,→
−
r3 ) + D(→
−
r3 , →
−
r1 ) + 2D(→
−
r2 , →
−
r3 ) = D(→
−
r1 , →
−
r2 ) − D(→
−
r2 , →
−
r3 + →
−
r2 − →
−
r1 ) + 2
−D( r + r − r , r ) + D(→
→
− →
− →
− →
− −r ,→−
r ) 3 2 1 3 3 1
= D(→
−
r1 , →
−
r2 − →
−
r3 ) + D(→
−
r3 + →
−
r2 − →
−
r1 , →
−
r
→
− →
−
+2D( r , r ) 2 3
= D(→
−r3 + → −
r2 , →
−
r2 − →
−
r3 ) + 2D(→−r2 , →
−
r3 )
= D( r3 , r2 ) − D( r2 , r3 ) + 2D( r2 , →
→
− →
− →
− →
− →
− −
r3 )
→
− →
− →
−
= D( r , r ) − D( r , r )→
−
3 2 2 3
= 0,
as claimed. We have proved then that the area of a triangle, whose vertices
(x1 , y1 ), (x2 , y2 ), (x3 , y3 ) are listed in counterclockwise order, is
" # " # " #!
1 x1 x2 x2 x3 x3 x1
det + det + det . (1.12)
2 y1 y2 y2 y3 y3 y1
In general, we have the following theorem.
53 Theorem (Surveyor’s Theorem) Let (x1 , y1 ), (x2 , y2 ), . . . , (xn , yn ) be the ver-

tices of a simple (non-crossing) polygon, listed in counterclockwise order. Then
its area is given by
" # " # " # " #!
1 x1 x2 x2 x3 xn−1 xn xn x1
det + det + · · · + det + det .
2 y1 y2 y2 y3 yn−1 yn yn y1
Proof: The proof is by induction on n. We have already proved the

cases n = 3 and n = 4 in (1.12) and (1.11), respectively. Consider now
a simple polygon P with n vertices. If P is convex then we may take any
vertex and draw a line to the other vertices, triangulating the polygon,
creating n − 2 triangles. If P is not convex, then there must be a vertex

(x3 , y3 )
b r3
r4 (x3 , y3 )
(x4 , y4 )b r3 b
r2
Chapter 1
r
b
(x2 , y2 ) b
(x2 , y2 )
r2
(x, y) b
r1 b r1 b
(x3 , y3 ) (x , y ) (x1 , y1 )
r3 1
b 1
r2
b
(x2 , y2 )
Figure 1.34: Area of a quadrilateral. Figure 1.35: Area of a triangle.
r1 b
(x1 , y1 )
Figure 1.36: Area of a triangle.
that has a reflex angle. A ray produced from this vertex must hit another
vertex, creating a diagonal, otherwise the polygon would have infinite
area. This diagonal divides the polygon into two sub-polygons. These
two sub-polygons are either both convex or at least one is not convex. In
the latter case, we repeat the argument, finding another diagonal and
creating a new sub-polygon. Eventually, since the number of vertices
is infinite, we end up triangulating the polygon. Moreover, the polygon
can be triangulated in such a way that all triangles inherit the positive
orientation of the original polygon but each neighbouring pair of triangles
have opposite orientations. Applying (1.12) we obtain that the area is
" #
X xi xj
det ,
yi yj
where the sum is over each oriented edge. Since each diagonal occurs
twice, but having opposite orientations, the terms
" # " #
xi xj xj xi
det + det = 0,
yi yj yj yi
disappear from the sum and we are simply left with

" # " # " # " #!
1 x1 x2 x2 x3 xn−1 xn xn x1
det + det + · · · + det + det .
2 y1 y2 y2 y3 yn−1 yn yn y1
We may use the software Maple in order to speed up computations with

vectors. Most of the commands we will need
" # are in the" linalg
#
package. For
1 →
− 2
example, let us define two vectors, →
−
a = and b = and a matrix A :=
2 1

" #
1 2
. Let us compute their dot product, find a unit vector in the direction of →
−
a,
3 4
and the angle between the vectors. (There must be either a colon or a semicolon
at the end of each statement. The result will not display if a colon is chosen.)
> with(linalg):
> a:=vector([2,1]);
a := [2, 1]
> b:=vector([1,2]);
b := [1, 2]
> normalize(a);
√ √
2 5 5
[ , ]
5 5
> dotprod(a,b);
4
> angle(a,b);

4
arccos
5
> A:=matrix([[1,2],[3,4]]);
" #
1 2
A :=
3 4
> det(A);
−2
Homework
→
−
Find all vectors →
Problem 1.5.1 −
a ∈ R2 then→
−
a = b.
−3 √
such that →
−
a ⊥ and ||a|| = 13.
2 Problem 1.5.5 (Polarisation Identity) Let
→
−
u ,→
−
v be vectors in R2 . Prove that
Problem 1.5.2 (Pythagorean Theorem) If →
− 1
→
− →
− u •→
−
v = ||→
−
u +→
−
v ||2 − ||→
−
u −→
−
v ||2 .
a ⊥ b , prove that 4
→
− − 2 →
− 2
a + b ||2 = →
||→
− a + b . Problem 1.5.6 Consider two lines on the
plane L1 and L2 with Cartesian equations
L1 : y = m 1 x + b1 and L2 : y = m 2 x + b1 ,
where m 1 6= 0, m 2 6= 0. Using Corollary
22, prove that L1 ⊥ L2 ⇐⇒ m 1 m 2 = −1.
Problem 1.5.3 Let a, b be arbitrary real
.
numbers. Prove that
(a2 + b2 )2 ≤ 2(a4 + b4 ). Problem 1.5.7 Find the Cartesian equa-

−1
→
− tion of all lines L′ passing through
Problem 1.5.4 Let → −
a , b be fixed vectors 2
2
in R . Prove that if π
and making an angle of radians with the
→
− 6
∀→
−
v ∈ R2 , →
−
v •→
−
a =→
−
v • b, Cartesian line L : x + y = 1.

Chapter 1
→−
v •→
−
Problem 1.5.8 Let →
−v,→−
w , be vectors on the →
−
a =→
− w −
v − 2 →w is perpendicular to →
−
w.
→
− →
− →
−
plane, with w 6= 0 . Prove that the vector w
1.6 Parametric Curves on the Plane

54 Definition Let [a; b] ⊆ R. A parametric curve representation r of a curve Γ is a
function r : [a; b] → R2 , with
!
x(t)
r(t) = ,
y(t)
and such that r([a; b]) = Γ. r(a) is the initial point of the curve and r(b) its
terminal point. A curve is closed if its initial point and its final point coincide.
The trace of the curve r is the set of all images of r, that is, Γ. If there exist
t1 6= t2 such that r(t1 ) = r(t2 ) = p, then p is a multiple point of the curve. The
curve is simple if its has no multiple points. A closed curve whose only multiple
points are its endpoints is called a Jordan curve.
1 − t2
t/10 Figure 1.39: x = ,
Figure 1.37: x = sin 2t, y = Figure 1.38: x = 2 cos t, 1 + t2
cos 6t. y = 2t/10 sin t. t − t3
y= .
1 + t2
Figure 1.40: x = (1 +
cos t)/2, y = (sin t)(1 +
cos t)/2.
Graphing parametric equations is a difficult art, and a theory akin to the one
studied for Cartesian equations in a first Calculus course has been developed.
Our interest is not in graphing curves, but in obtaining suitable parametrisa-
tions of simple Cartesian curves. We mention in passing however that Maple

Parametric Curves on the Plane
has excellent capabilities for graphing parametric equations. For example, the
commands to graph the various curves in figures 1.37 through 1.40 follow.
> with(plots):
> plot([sin(2*t),cos(6*t),t=0..2*Pi],x=-5..5,y=-5..5);
> plot([2ˆ(t/10)*cos(t),2ˆ(t/10)*sin(t),t=-20..10],x=-5..5,y=-5..5);
> plot([(1-tˆ2)/(1+tˆ2),(t-tˆ3)/(1+tˆ2),t=-2..2],x=-5..5,y=-5..5);
> plot([(1+cos(t))/2,sin(t)*(1+cos(t))/2,t=0..2*Pi],x=-5..5,y=-5..5);
Our main focus of attention will be the following. Given a Cartesian curve
with equation f (x, y) = 0, we wish to find suitable parametrisations for them.
That is, we want to find functions x : t 7→ a(t), y : t 7→ b(t) and an interval I
such that the graphs of f (x, y) = 0 and f (a(t), b(t)) = 0, t ∈ I coincide. These
parametrisations may differ in features, according to the choice of functions and
the choice of intervals.
55 Example Consider the parabola with Cartesian equation y = x2 . We will give

various parametrisations for portions of this curve.
1. If x = t and y = t2 , then clearly y = t2 = x2 . This works for every t ∈ R,
and hence the parametrisation
x = t, y = t2 , t∈R
works for the whole curve. Notice that as t increases, the curve is traversed
from left to right.
√ √
2. If x = t and y = t, then again y = t = ( t)2 = x2 . This works only for
t ≥ 0, and hence the parametrisation
√
x = t, y = t, t ∈ [0; +∞[
gives the half of the curve for which x ≥ 0. As t increases, the curve is
traversed from left to right.
√ √
3. Similarly, if x = − t and y = t, then again y = t = (− t)2 = x2 . This
works only for t ≥ 0, and hence the parametrisation
√
x = − t, y = t, t ∈ [0; +∞[
gives the half of the curve for which x ≤ 0. As t increases, x decreases, and
so the curve is traversed from right to left.
4. If x = cos t and y = cos2 t, then again y = cos2 t = (cos t)2 = x2 . Both x
and y are periodic with period 2π, and so this parametrisation only agrees
with the curve y = x2 when −1 ≤ x ≤ 1. For t ∈ [0; π], the cosine decreases
from 1 to −1 and so the curve is traversed from right to left in this interval.

Chapter 1
√ √
Figure 1.41: x = t, y = t2 , Figure 1.42: x = t, y = t, Figure 1.43: x = − t, y =
t ∈ R. t ∈ [0; +∞[. t, t ∈ [0; +∞[.
Figure 1.44: x = cos t, y =

cos2 t, t ∈ [0; π].
The identities
cos2 θ + sin2 θ = 1, tan2 θ − sec2 θ = 1, cosh2 θ − sinh2 θ = 1,
are often useful when parametrising quadratic curves.
(x − 1)2 (y + 2)2
56 Example Give two distinct parametrisations of the ellipse + =
4 9
1.
1. The first parametrisation must satisfy that as t traverses the values in the
interval [0; 2π], one starts at the point (3, −2), traverses the ellipse once
counterclockwise, finishing at (3, −2).
2. The second parametrisation must satisfy that as t traverses the interval

[0; 1], one starts at the point (3, −2), traverses the ellipse twice clockwise,
and returns to (3, −2).
Solution: ◮ What formula do we know where a sum of two squares

equals 1? We use a trigonometric substitution, a sort of “polar coordi-
nates.” Observe that for t ∈ [0; 2π], the point (cos t, sin t) traverses the
unit circle once, starting at (1, 0) and ending there. Put
x−1
= cos t =⇒ x = 1 + 2 cos t,
2
and
y+2
= sin t =⇒ y = −2 + 3 sin t.
3
Then
x = 1 + 2 cos t, y = −2 + 3 sin t, t ∈ [0; 2π]
is the desired first parametrisation.
For the second parametrisation, notice that as t traverses the interval

[0; 1], (sin 4πt, cos 4πt) traverses the unit interval twice, clockwise, but

begins and ends at the point (0, 1). To begin at the point (1, 0) we must
π π
make a shift: sin 4πt + , cos 4πt + will start at (1, 0) and
2 2
travel clockwise twice, as t traverses [0; 1]. Hence we may take
π π
x = 1 + 2 sin 4πt + , y = −2 + 3 cos 4πt + , t ∈ [0; 1]
2 2
as our parametrisation. ◭
Some classic curves can be described by mechanical means, as the curves

drawn by a spirograph. We will consider one such curve.
O′ b b
φ B
b
P
b
θ b
O A
Figure 1.45: Construction of Figure 1.46: Hypocycloid Figure 1.47: Hypocycloid

the hypocycloid. with R = 5, ρ = 1. with R = 3, ρ = 2.
57 Example A hypocycloid is a curve traced out by a fixed point P on a circle C of

radius ρ as C rolls on the!inside of a circle with centre at O and radius R. If the
R
initial position of P is , and θ is the angle, measured counterclockwise, that
0
a ray starting at O and passing through the centre of C makes with the x-axis,
shew that a parametrisation of the hypocycloid is

(R − ρ)θ
x = (R − ρ) cos θ + ρ cos ,
ρ

(R − ρ)θ
y = (R − ρ) sin θ − ρ sin .
ρ

Chapter 1
Solution: ◮ Suppose that starting from θ = 0, the centre O ′ of the

small circle moves counterclockwise inside the larger circle by an angle
θ, and the point P = (x, y) moves clockwise an angle φ. The arc length
travelled by the centre of the small circle is (R − ρ)θ radians. At the
same time the point P has rotated ρφ radians, and so (R − ρ)θ = ρφ.
See figure 1.45, where O ′ B is parallel to the x-axis.
π
Let A be the projection of P on the x-axis. Then ∠OAP = ∠OP O′ = ,
2
′ π
∠OO P = π − φ − θ, ∠P OA = − φ, and OP = (R − ρ) sin(π − φ − θ).
2
Hence
π
x = (OP ) cos ∠P OA = (R − ρ) sin(π − φ − θ) cos( − φ),
2
π
y = (R − ρ) sin(π − φ − θ) sin( − φ).
2
Now
π
x = (R − ρ) sin(π − φ − θ) cos( − φ)
2
= (R − ρ) sin(φ + θ) sin φ
(R − ρ)
= (cos θ − cos(2φ + θ))
2
(R − ρ)
= (R − ρ) cos θ − (cos θ + cos(2φ + θ))
2
= (R − ρ) cos θ − (R − ρ)(cos(θ + φ) cos φ).
ρ ρ
Also, cos(θ + φ) = − cos(π − θ − φ) = − =− and cos φ =
OO′ R−ρ
(R − ρ)θ
cos and so
ρ

(R − ρ)θ
x = (R−ρ) cos θ−(R−ρ)(cos(θ+φ) cos φ = (R−ρ) cos θ+ρ cos ,
ρ
as required. The identity for y is proved similarly. A particular example

appears in figure 1.47. ◭

b b
b
b b d→
−
x
b
b
Parametric
b Curves on the Plane
→
−
x
b
→
−
x + d→
−
x Figure 1.48: Length of a curve.
Figure 1.49: Area enclosed by a simple closed curve
Given a curve Γ how can we find its length? The idea, as seen in figure 1.48
is to consider the projections dx, dy at each point. The length of the vector
" #
dx
dr =
dy
is È
||dr|| = (dx)2 + (dy)2 .
Hence the length of Γ is given by
Z Z È
||dr|| = (dx)2 + (dy)2 . (1.13)
Γ Γ
Similarly, suppose that Γ is a simple closed curve in R2 . How do we find the

(oriented) area of the region it encloses? The idea, borrowed from finding areas
of polygons, is to split the region into triangles, each of area
" # " #
1 x x + dx 1 x dx 1
det = det = (xdy − ydx),
2 y y + dy 2 y dy 2
and to sum over the closed curve, obtaining a total oriented area of
I " # I
1 x dx 1
det = (xdy − ydx). (1.14)
2 Γ y dy 2 Γ
I
Here denotes integration around the closed curve.
Γ

Chapter 1
58 Example Let (A, B) ∈ R2 , A > 0, B > 0. Find a parametrisation of the ellipse

2 x2 y2
Γ: (x, y) ∈ R : + =1 .
A2 B2
Furthermore, find an integral expression for the perimeter of this ellipse and find
the area it encloses.
Solution: ◮ Consider the parametrisation Γ : [0; 2π] → R2 , with

" # " #
x A cos t
= .
y B sin t
This is a parametrisation of the ellipse, for
x2 y2 A2 cos2 t B 2 sin2 t
+ = + = cos2 t + sin2 t = 1.
A2 B2 A2 B2
Notice that this parametrisation goes around once the ellipse counter-
clockwise. The perimeter of the ellipse is given by
Z Z È
→ 2π
d−
r = A2 sin2 t + B 2 cos2 t dt.
Γ 0
The above integral is an elliptic integral, and we do not have a closed

form for it (in terms of the elementary functions studied in Calculus I).
We will have better luck with the area of the ellipse, which is given by
I I
1 1
(xdy − ydx) = (A cos t d(B sin t) − B sin t d(A cos t))
2 Γ 2Z
1 2π
= (AB cos2 t + AB sin2 t)) dt
2 Z0 .
1 2π
= AB dt
2 0
= πAB.
59 Example Find a parametric representation for the astroid

©
Γ : (x, y) ∈ R2 : x2/3 + y 2/3 = 1 ,
in figure 1.51. Find the perimeter of the astroid and the area it encloses.
Solution: ◮ Take " # " #

x cos3 t
=
y sin3 t

with t ∈ [0; 2π]. Then
x2/3 + y 2/3 = cos2 t + sin2 t = 1.
The perimeter of the astroid is

Z Z 2π È
||dr|| = 9 cos4 t sin2 t + 9 sin4 t cos2 t dt
Γ Z02π
= 3| sin t cos t| dt
0Z
3 2π
= | sin 2t| dt
2Z 0
π/2
= 6 sin 2t dt
0
= 6.
The area of the astroid is given by

I I
1 1
(xdy − ydx) = (cos3 t d(sin3 t) − sin3 t d(cos3 t))
2 Γ 2Z
1 2π
= (3 cos4 t sin2 t + 3 sin4 t cos2 t)) dt
2 Z0
3 2π
= (sin t cos t)2 dt
2 Z0
3 2π
= (sin 2t)2 dt
8 0Z
3 2π
= (1 − cos 4t) dt
16 0
3π
= .
8
We can use Maple (at least version 10) to calculate the above integrals.
For example, if (x, y) = (cos3 t, sin3 t), to compute the arc length we use
the path integral command and to compute " the
# area, we use the line
−y/2
integral command with the vector field .
x/2
> with(Student[VectorCalculus]):
> PathInt( 1, [x,y]=Path( <(cos(t))ˆ3,(sin(t))ˆ3>,0..2*Pi));
> LineInt( VectorField(<-y/2,x/2>), Path( <(cos(t))ˆ3,(sin(t))ˆ3>,0..2*Pi));
◭
We include here for convenience, some Maple commands to compute various arc
lengths and areas.
60 Example To obtain the arc length of the path in figure 1.52, we type
> PathInt(1, [x,y] = LineSegments( <0,0>, <1,1>, <1,2> ,<2,1>,<3,3>,<4,1>);
To obtain the arc length of the path in figure 1.53, we type

Chapter 1
> PathInt(1, [x,y] = Arc( Circle( <0,0>, 3), Pi/6, Pi/5 ) ;
To obtain the area inside the curve in 1.54
> LineInt( VectorField(<-y/2,x/2>),
> Path( <(1+cos(t))*(cos(t))+1,(1+cos(t))*(sin(t))+2>,0..2*Pi));
5 5
5 4 4
4 3 b 3
b
3 2 2
b b
2 1 1
b b b
1 b
b
1 2 3 4 5 1 2 3 4 5
1 2 3 4 5
Figure 1.53: Arc of circle of Figure 1.54: x = 1 + (1 +

Figure 1.52: Line Path. π π cos t)(cos t), y = 2 + (1 +
radius 3, angle ≤θ≤ .
6 5 cos t)(sin t).
Homework
Problem 1.6.1 A curve is represented Problem 1.6.5 Describe the trace of the
parametrically by x(t) = t3 − 2t, y(t) = parametric curve
t3 + 2t. Find its Cartesian equation.
x sin t
= , t ∈ [0; 4π].
Problem 1.6.2 Give an implicit Cartesian y 2 sin t + 1
equation for the parametric representation
t2 t3
x= , y = . Problem 1.6.6 Consider the plane curve
1 + t5 1 + t5 √ √
defined implicitly by x + y = 1. Give a
suitable parametrisation of this curve, and
Problem 1.6.3 Let a, b, c, d be strictly posi- find its length. The graph of the curve ap-
tive real constants. In each case give an im- pears in figure 1.55.
plicit Cartesian equation for the parametric
representation and describe the trace of the
parametric curve.
1. x = at + b, y = ct + d 1
2. x = cos t, y = 0
3. x = a cosh t, y = b sinh t −1 1
π π −1
4. x = a sec t, y = b tan t, t ∈] − ; [
2 2
Figure 1.55: Problem 1.6.6.
Problem 1.6.4 Parametrise the curve y =
π
log cos x for 0 ≤ x ≤ . Then find its arc
3 Problem 1.6.7 Consider the graph given
length.
parametrically by x(t) = t3 + 1, y(t) =
1 − t2 . Find the area under the graph, over

the x axis, and between the lines x = 1 and ρ. The curve traced out by P as the circle
x = 2. rolls along a straight line, without slipping,
is called a cycloid. Find a parametrisation
of the cycloid.
Problem 1.6.8 Find the arc length of the
curve given parametrically by x(t) = 3t2 ,
y(t) = 2t3 for 0 ≤ t ≤ 1.
Problem 1.6.9 Let C be the curve in R2 de-

fined by
t2 (2t + 1)3/2 1 1 P d
x(t) = , y(t) = , t ∈ [− ; + ]. b b
C
2 3 2 2
θ ρ
Find the length of this curve.
b b
Problem 1.6.10 Find the area enclosed by B

the curve x(t) = sin3 t, y(t) = (cos t)(1 +
sin2 t). The curve appears in figure 1.56.
Figure 1.58: Cycloid
Problem 1.6.13 Find the arc length of the

arc of the cycloid x = ρ(t − cos t), y =
ρ(1 − cos t), t ∈ [0; 2π].
Problem 1.6.14 Find the length of the

Figure 1.56: Problem 1.6.10. parametric curve given by
x = et cos t, y = et sin t, t ∈ [0; π].

2
Problem 1.6.11 Let C be the curve in R
defined by Problem 1.6.15 A shell strikes an airplane
3t 3t 2 flying at height h above the ground. It
x(t) = , y(t) = , t ∈ R\{−1},
is known that the shell was fired from a
1 + t3 1 + t3
gun on the ground with a muzzle veloc-
which you may see in figure 1.57. Find the ity of magnitude V , but the position of the
area enclosed by the loop of this curve. gun and its angle of elevation are both un-
known. Deduce that the gun is situated
within a circle whose centre lies directly be-
low the airplane and whose radius is
1
p
V V 2 − 2gh
.
g
−1 1
−1

Problem 1.6.16 The parabola y 2 = −4px
rolls without slipping around the parabola
Problem 1.6.12 Let P be a point at a dis- y 2 = 4px. Find the equation of the locus of
tance d from the centre of a circle of radius the vertex of the rolling parabola.

Chapter 1
1.7 Vectors in Space

61 Definition The 3-dimensional Cartesian Space is defined and denoted by
R3 = {r = (x, y, z) : x ∈ R, y ∈ R, z ∈ R} .
In figure 1.59 we have pictured the point (2, 1, 3).
x y
Figure 1.59: A point in space.
Having oriented the z axis upwards, we have a choice for the orientation of
the the x and y-axis. We adopt a convention known as a right-handed coordinate
system, as in figure 1.60. Let us explain. In analogy to R2 we put
2 3 2 3 2 3
1 0 0
→
− 6 7 →
− 6 7 →
− 6 7
i = 405 , j = 415 , k = 40 5 ,
0 0 1
and observe that

→
− →
− →
−
r = (x, y, z) = x i + y j + z k .
Most of what we did in R2 transfers to R3 without major complications.

→
− →
−
k k
Vectors in Space
→
− →
−
j j
→
− →
−
i i
Figure 1.61: Right Hand.
Figure 1.60:
ℓ3 Right-handed Figure 1.62: Left-handed
system. ℓ system.
2
ℓ1
Figure 1.63: ℓ1 k ℓ2 . ℓ1 and

ℓ3 are skew.
→
−
62 Definition The dot product of two vectors →
−
a and b in R3 is
→
− →
−
a • b = a1 b1 + a2 b2 + a3 b3 .
The norm of a vector →

−
a in R3 is
→ p È
−
a = →−
a •→
−
a = (a1 )2 + (a2 )2 + (a3 )2 .
→
− − →
−
Just as in R2 , the dot product satisfies →
−
a • b = →
a b cos θ, where θ ∈ [0; π]
is the convex angle between the two vectors.
The Cauchy-Schwarz-Bunyakovsky Inequality takes the form
→
− − →
−
|→
−
a • b | ≤ →
a b =⇒ |a1b1 +a2 b2 +a3 b3 | ≤ (a21 +a22 +a23 )1/2 (b21 +b22 +b23 )1/2 ,
equality holding if an only if the vectors are parallel.
63 Example Let x, y, z be positive real numbers such that x2 + 4y 2 + 9z 2 = 27.

Maximise x + y + z.
Solution: ◮ Since x, y, z are positive, |x + y + z| = x + y + z. By

Chapter 1
Cauchy’s Inequality,
1/2 √
1 1 1 1 √ 7 7 3
|x+y+z| = x + 2y + 3z ≤ (x +4y +9z )

2 2 2 1/2
1+ + = 27 = .
2 3 4 9 6 2
Equality occurs if and only if

2 3 2 3
x 1 √
6 7 6 7 λ λ λ2 λ2 18 3
42y 5 = λ 41/25 =⇒ x = λ, y = , z = =⇒ λ2 + + = 27 =⇒ λ = ± .
4 9 4 9 7
3z 1/3
Therefore for a maximum we take

√ √ √
18 3 9 3 2 3
x= , y= , z= .
7 14 7
◭
→
−
64 Definition Let a be a point in R3 and let →−v 6= 0 be a vector in R3 . The
parametric line passing through a in the direction of →
−
v is the set
©
r ∈ R3 : r = a + t→
−
v .

1
65 Example Find the parametric equation of the line passing through 2 and
3

−2
−1 .
0
Solution: ◮ The line follows the direction

2 3 2 3
1 − (−2) 3
6 7 6 7
42 − (−1)5 = 435 .
3−0 3
The desired equation is

2 3
x 1 3
6 7
y = 2 + t 4 35 .
z 3 3

Vectors in Space
☞ Given two lines in space, one of the following three situations might arise:
(i) the lines intersect at a point, (ii) the lines are parallel, (iii) the lines are skew
(non-parallel, one over the other, without intersecting, lying on different planes).
See figure 1.63.
→
− →
−
Consider now two non-zero vectors → −a and b in R3 . If →
−
a k b , then the set
→
−
{s→
−a + t b : s ∈ R, t ∈ R} = {λ→−a : λ ∈ R},
→
−
which is a line through the origin. Suppose now that → −
a and b are not parallel.
We saw in the preceding chapter that if the vectors were on the plane, they would
span the whole plane R2 . In the case at hand the vectors are in space, they still
span a plane, passing through the origin. Thus
→
− →
−
{s→
−
a + t b : s ∈ R, t ∈ R, →
−
a 6k b }
is a plane passing through the origin. We will say, abusing language, that two
vectors are coplanar if there exists bi-point representatives of the vector that lie
on the same plane. We will say, again abusing language, that a vector is parallel
to a specific plane or that it lies on a specific plane if there exists a bi-point
representative of the vector that lies on the particular plane. All the above gives
the following result.
66 Theorem Let → −
v ,→
−
w in R3 be non-parallel vectors. Then every vector →
−u of the
form
→
−u = a→−v + b→
−w,
→
−
a, b arbitrary scalars, is coplanar with both v and →
→
− −
w . Conversely, any vector t
→
− →
−
coplanar with both v and w can be uniquely expressed in the form
→
−
t = p→
−
v + q→
−
w.
See figure 1.64.
From the above theorem, if a vector →−a is not a linear combination of two other
→
− →−
vectors b , c , then linear combinations of these three vectors may lie outside the
→
− −
plane containing b , → c . This prompts the following theorem.
→
− −
67 Theorem Three vectors →
−
a , b ,→c in R3 are said to be linearly independent if
→
− →
−
α→−
a + β b + γ→ −c = 0 =⇒ α = β = γ = 0.
Any vector in R3 can be written as a linear combination of three linearly indepen-
dent vectors in R3 .
A plane is determined by three non-collinear points. Suppose

that a, b, and
x
c are non-collinear points on the same plane and that r = y is another
z

Chapter 1
−
→
arbitrary point on this plane. Since a, b, and c are non-collinear, ab and → −
ac,
−
→
which are coplanar, are non-parallel. Since ax also lies on the plane, we have by
Lemma 66, that there exist real numbers p, q with
→
− −
→
ar = pab + q →
−
ac.
By Chasles’ Rule,
→
− →
−
r =→
−
a + p( b − →
−
a ) + q(→
−
c −→
−
a ),
is the equation of a plane containing the three non-collinear points a, b, and c,
→
−
where →−a , b , and →
−
c are the position vectors of these points. Thus we have the
following theorem. 2 3
a
→
− 6 7
n = 4b 5
c
→
−
v
p→
−
v + q→
−
w →
−
x
ax + by + cz = d
→
−
w
Figure 1.64: Theorem 66. Figure 1.65: Theorem 69.
68 Theorem Let → −
u and →−
v be linearly independent vectors. The parametric equa-
tion of a plane containing the point a, and parallel to the vectors →
−
u and →
−v is
given by
→
−r −→−a = p→−u + q→
−
v.
Componentwise this takes the form
x − a1 = pu1 + qv1 ,
y − a2 = pu2 + qv2 ,
z − a3 = pu3 + qv3 .
Multiplying the first equation by u2 v3 − u3 v2 , the second by u3 v1 − u1 v3 , and

the third by u1 v2 − u2 v1 , we obtain,
(u2 v3 − u3 v2 )(x − a1 ) = (u2 v3 − u3 v2 )(pu1 + qv1 ),

(u3 v1 − u1 v3 )(y − a2 ) = (u3 v1 − u1 v3 )(pu2 + qv2 ),
(u1 v2 − u2 v1 )(z − a3 ) = (u1 v2 − u2 v1 )(pu3 + qv3 ).

Vectors in Space
Adding gives,
(u2 v3 − u3 v2 )(x − a1 ) + (u3 v1 − u1 v3 )(y − a2 ) + (u1 v2 − u2 v1 )(z − a3 ) = 0.
Put
a = u2 v3 − u3 v2 , b = u3 v1 − u1 v3 , c = u1 v2 − u2 v1 ,
and
d = a1 (u2 v3 − u3 v2 ) + a2 (u3 v1 − u1 v3 ) + a3 (u1 v2 − u2 v1 ).
Since v is linearly independent from →
→
− −
u , not all of a, b, c are zero. This gives the
following theorem.
69 Theorem The equation of the plane in space can be written in the form
ax + by + cz = d,
which is the Cartesian equation of the plane. Here a2 + b2 + c2 6= 0, that is, at
2 3
a
→
− 6 7
least one of the coefficients is non-zero. Moreover, the vector n = 4 b 5 is normal
c
to the plane with Cartesian equation ax + by + cz = d.
Proof: We have already proved the first statement. For the second
statement, observe that if →−u and → −v are non-parallel vectors and →−r −
→
− →
− →
−
a = p u + q v is the equation of the plane containing the point a and
parallel to the vectors →
−
u and →−v , then if →
−
n is simultaneously perpendic-
ular to u and v then ( r − a ) n = 0 for →
→
− →
− →
− →
− • →
− −
u •→
−
n =0 = → −
v •→
−n . Now,
since at least one of a, b, c is non-zero, we may assume a 6= 0. The
argument is similar if one of the other letters is non-zero and a = 0. In
this case we can see that
d b c
x = − y − z.
a a a
Put y = s and z = t. Then
2
d b3 c3 2
x− − −
a 6 a7 6 a7
y = s6 7 6 7
4 1 5 + t4 0 5
z 0 1
is a parametric equation for the plane. We have

b c
a − + b (1) + c (0) = 0, a − + b (0) + c (1) = 0,
a a
2 3 b3 2 c3 2
a − −
6 7 6 a7 6 a7
and so 4 b 5 is simultaneously perpendicular to 4 1 5 and 4 0 7
6 7 6
5, prov-
c 0 1
ing the second statement.❑

Chapter 1

1
70 Example The equation of the plane passing through the point −1 and
2
2 3
−3
6 7
normal to the vector 4 2 5 is
4
−3(x − 1) + 2(y + 1) + 4(z − 2) = 0 =⇒ −3x + 2y + 4z = 3.
71 Example Find both the parametric equation and the Cartesian equation of
2 3 2 3
1 1
6 7 6 7
the plane parallel to the vectors 415 and 415 and passing through the point
1 0

0
−1 .
2
Solution: ◮ The desired parametric equation is

2 3 2 3
x 1 1
6 7 6 7
y+1 = s 41 5 + t 4 1 5 .
z−2 1 0
This gives
s = z − 2, t=y+1−s=y+1−z+2=y−z+3
and
x = s + t = z − 2 + y − z + 3 = y + 1.
Hence the Cartesian equation is x − y = 1. ◭
−
n is perpendicular to plane Π1 and →−n ′ is perpendicular to plane
Π2 , the angle between the two planes is the angle between the two vectors →−n and
→
− ′
n .
73 Example

z z z
Vectors in Space
y y x y
x x
Figure 1.68: Solid bounded
Figure 1.66: The plane z = Figure 1.67: The plane z =
by the planes z = 1 − x and
1 − x. 1 − y.
z = 1 − y in the first octant.
1. Draw the intersection of the plane z = 1 − x with the first octant.

2. Draw the intersection of the plane z = 1 − y with the first octant.
3. Find the angle between the planes z = 1 − x and z = 1 − y.
4. Draw the solid S which results from the intersection of the planes z = 1−x
and z = 1 − y with the first octant.
5. Find the volume of the solid S .
Solution: ◮
1. This appears in figure 1.66.
2 3 2 3
1 0
6 7 6 7
3. The vector 405 is normal to the plane x + z = 1, and the vector 415
1 1
is normal to the plane y + z = 1. If θ is the angle between these
two vectors, then
1·0+0·1+1·1 1 π
cos θ = √ √ =⇒ cos θ = =⇒ θ = .
2 2 2
1 +1 · 1 +1 2 2 3

5. The resulting solid is a pyramid with square base of area A =
1 · 1 = 1. Recall that the volume of a pyramid is given by the
Ah
formula V = , where A is area of the base of the pyramid and
3
h is its height. Now, the height of this pyramid is clearly 1, and
1
hence the volume required is .
3
◭
Homework

Chapter 1
→
− Ǒ
→
−
Problem 1.7.1
→ Vectors
a , b satisfy 0
− →
− →− −
→
a = 13, b = 19, a + b = 24. point 0 .

− −
→ 1
Find → a − b .
Problem 1.7.8 Find the equation of the

Problem 1.7.2 Find
theǑequation of the plane perpendicular to the line ax = by =
1 cz,
Ǒ abc 6= 0 and passing through the point
line passing through 2 in the direction 1
3 1 in R3 .
2 3
−2 1
6 7
of 4−15.
0 Problem 1.7.9 Find the (shortest) distance
from the point (1, 2, 3) to the plane x − y +
z = 1.
Problem 1.7.3 Find
the Ǒ
equation of plane
1 Problem 1.7.10 Determine whether the
containing the point 1 and perpendic- lines
1 Ǒ Ǒ 2 3
x 1 2
ular to the line x = 1+t, y = −2t, z = 1−t. 6 7
L1 : y = 1 + t 415 ,
z 1 1
Problem 1.7.4 Find
the equation
Ǒ of plane
1 Ǒ Ǒ 2 3
x 0 2
containing the point −1 and contain- 6 7
L2 : y = 0 + t 4−15 ,
−1
z 1 1
ing the line x = 2y = 3z.
intersect. Find the angle between them.
Problem 1.7.5 (Putnam Exam 1984) Let

A be a solid a × b × c rectangular brick in Problem 1.7.11 Let a, b, c be arbitrary real
three dimensions, where a > 0, b > 0, c > numbers. Prove that
0. Let B be the set of all points which are
at distance at most 1 from some point of A (a2 + b2 + c2 )2 ≤ 3(a4 + b4 + c4 ).
(in particular, A ⊆ B). Express the volume
of B as a polynomial in a, b, c. Problem 1.7.12 Let a > 0, b > 0, c >
0 be the lengths of the sides of △ABC.
− (Vertex A is opposite to the side mea-
Problem 1.7.6 It is known that → a = 3,
→ suring a, etc.) Recall that by Heron’s
→
− →
−
b = 4, c = 5 and that a + b +
− →
− Formula, the areaÈ of this triangle is
→
− →
− S(a, b, c) = s(s − a)(s − b)(s − c),
c = 0 . Find
a+b+c
→
− →
− − where s = is the semiperime-
→
−
a • b + b •→
c +→
−
c •→
−
a. 2
ter of the triangle. Prove that f (a, b, c) =
S(a, b, c)
is maximised when △ABC is
a 2 + b2 + c 2
Problem 1.7.7 Find the equation of the equilateral, and find this maximum.
line perpendicular to the plane ax + a2 y +
a3 z = 0, a 6= 0 and passing through the

Cross Product
Problem 1.7.13 Let x, y, z be strictly posi- Problem 1.7.17 Let (→ −r −→ −

a )•→
−n = 0 be a
tive numbers. Prove that plane passing through the point a and per-
√ √ √ pendicular to vector →
−n . If b is not a point
x+y+ y+z+ z+x √
√ ≤ 6. on the plane, then the distance from b to
x+y+z the plane is

→
− →
− → −
Problem 1.7.14 Let x, y, z be strictly posi- ( a − b )• n
tive numbers. Prove that → .
−
n

x2 y2 z2
x+y+z ≤ 2 + + .
y+z z+x x+y Problem 1.7.18 (Putnam Exam 1980) Let
S be the solid in three-dimensional
Ǒ space
Problem 1.7.15 Find the Cartesianequa-
Ǒ x
1 consisting of all points y satisfying the
tion of the plane passing through 0 , z
0 following system of six conditions:
Ǒ Ǒ
0 0 x ≥ 0, y ≥ 0, z ≥ 0,
1 and 0 . Draw this plane and its
x + y + z ≤ 11,
0 1
intersection with the first octant. Find the 2x + 4y + 3z ≤ 36,
Ǒ
volume Ǒ tetrahedron
of the Ǒ Ǒvertices at
with 2x + 3z ≤ 24.
0 1 0 0
Determine the number of vertices and the
0 , 0 , 1 and 0 . number of edges of S.
0 0 0 1
Problem 1.7.19 Given a polyhedron with n
Problem 1.7.16 Prove that there do not ex- faces, consider n vectors, each normal to a
ist three unit vectors in R3 such that the face of the polyhedron, and length equal to
2π the area of the face. Prove that the sum of
angle between any two of them be > . →
−
3 these vectors is 0 .
1.8 Cross Product

We now define the standard cross product in R3 as a product satisfying the
following properties.
−
x ,→
−
y ,→
−
z be vectors in R3 , and let α ∈ R be a scalar. The cross
product × is a closed binary operation satisfying
➊ Anti-commutativity: →
−
x ×→
−
y = −(→
−
y ×→
−
x)
➋ Bilinearity:
(→
−
x +→
−
z )×→
−
y =→
−
x ×→
−
y +→
−
z ×→
−
y and →
−
x × (→
−
z +→
−
y)=→
−
x ×→
−
z +→
−
x ×→
−
y
➌ Scalar homogeneity: (α→

−
x)×→
−
y =→
−
x × (α→
−
y ) = α(→
−
x ×→
−
y)
→
−
➍ →
−
x ×→
−
x = 0

Chapter 1
➎ Right-hand Rule:
→
− →
− →
− →− →
− →
− → − →
− →
−
i × j = k, j × k = i , k × i = j .
It follows that the cross product is an operation that, given two non-parallel
vectors on a plane, allows us to “get out” of that plane.
75 Example Find
2 3 2 3
1 0
6 7 6 7
4 0 5 × 415 .
−3 2
Solution: ◮ We have
→
− →
− →
− →
− →
− →
− →
− →
− →
− →
− →
− →
−
( i −3k)×( j +2k) = i × j +2 i × k −3k × j −6k × k
→
− →
− →
− →
−
= k −2 j +3 i +60
→
− →
− →
−
= 3 i −2 j + k.
Hence 2 3 2 3 2 3
1 0 3
6 7 6 7 6 7
4 0 5 × 415 = 4−25 .
−3 2 1
◭
☞ The cross product of vectors in R3 is not associative, since

→
− →
− →
− →
− →
− →
−
i ×( i × j )= i × k =− j
but
→
− →
− →
− →
− →
− →
−
( i × i )× j = 0 × j = 0.
Operating as in example 75 we obtain
2 3 2 3
x1 y1
6 7 6 7
76 Theorem Let →
−
x = 4x2 5 and →
−
y = 4y2 5 be vectors in R3 . Then
x3 y3
→
− →
− →
− →
−
x ×→
−
y = (x2 y3 − x3 y2 ) i + (x3 y1 − x1 y3 ) j + (x1 y2 − x2 y1 ) k .

y sin θ
→
−
x
−
×→
y
−
−
y
x →

Cross Product
→
−
θ
−
→
x →
− →
y −
x
Figure 1.69: Theorem 79. Figure 1.70: Area of a parallelogram
→
− →
− →
− →
− →
− →
− →
−
Proof: Since i × i = j × j = k × k = 0 , we only worry about
the mixed products, obtaining,
→
− →
− →
− →
− →
− →
− →
−
x ×→
−
y = (x1 i + x2 j + x3 k ) × (y1 i + y2 j + y3 k )
→
− →
− →
− →
− →
− →
− →
− →
−
= x 1 y2 i × j + x 1 y3 i × k + x 2 y1 j × i + x 2 y3 j × k
→
− →
− →
− →
−
+x3 y1 k × i + x3 y2 k × j
→
− →
− →
− →
− →
− →
−
= (x1 y2 − y1 x2 ) i × j + (x2 y3 − x3 y2 ) j × k + (x3 y1 − x1 y3 ) k × i
→
− →
− →
−
= (x1 y2 − y1 x2 ) k + (x2 y3 − x3 y2 ) i + (x3 y1 − x1 y3 ) j ,
proving the theorem. ❑
Using the cross product, we may obtain a third vector simultaneously per-
pendicular to two other vectors in space.
77 Theorem → −x ⊥ (→
−
x ×→ −
y ) and →
−
y ⊥ (→−
x ×→ −
y ), that is, the cross product of two
vectors is simultaneously perpendicular to both original vectors.
Proof: We will only check the first assertion, the second verification is
analogous.
→
− →
− →
− →
− →
−
x •(→
−
x ×→
−
y) = (x1 i + x2 j + x3 k )•((x2 y3 − x3 y2 ) i
→
− →
−
+(x3 y1 − x1 y3 ) j + (x1 y2 − x2 y1 ) k )
= x 1 x 2 y3 − x 1 x 3 y2 + x 2 x 3 y1 − x 2 x 1 y3 + x 3 x 1 y2 − x 3 x 2 y1
= 0,
completing the proof. ❑
Although the cross product is not associative, we have, however, the following
theorem.
78 Theorem
→
− →
− →
− →
− −
a ×(b ×→
−
c ) = (→
−
a •→
−
c ) b − (→
−
a • b )→
c.

Chapter 1
Proof:
→
− →
− →
− →
− →
− →
−
a ×(b ×→
−
c) = (a1 i + a2 j + a3 k ) × ((b2 c3 − b3 c2 ) i +
→
− →
−
+(b3 c1 − b1 c3 ) j + (b1 c2 − b2 c1 ) k )
→
− →
− →
−
= a1 (b3 c1 − b1 c3 ) k − a1 (b1 c2 − b2 c1 ) j − a2 (b2 c3 − b3 c2 ) k
→
− →
− →
−
+a2 (b1 c2 − b2 c1 ) i + a3 (b2 c3 − b3 c2 ) j − a3 (b3 c1 − b1 c3 ) i
→
− →
− →
−
= (a1 c1 + a2 c2 + a3 c3 )(b1 i + b2 j + b3 i )+
→
− →
− →
−
(−a1 b1 − a2 b2 − a3 b3 )(c1 i + c2 j + c3 i )
→
− →
−
= (→
−
a •→−c ) b − (→−a • b )→
−
c,
b b
b
P
D′ b
b
→
−
a × b
A′
→
−
b
b
b
C′
→
−
D
c
b
N
θ
−b
→ b
B′
x A b
b
→
−
a y
C
b
b
M
B
Figure 1.71: Theorem 82. Figure 1.72: Example 83.
79 Theorem Let (→
−
x ,→
\ −
y ) ∈ [0; π] be the convex angle between two vectors →
−
x and
→
−
y . Then
||→
−
x ×→
−
y || = ||→
−
x ||||→
−
y || sin (→
−
x ,→
\ −
y ).

Cross Product
Proof: We have
||→
−
x ×→
−
y ||2 = (x2 y3 − x3 y2 )2 + (x3 y1 − x1 y3 )2 + (x1 y2 − x2 y1 )2
= y 2 y32 − 2x2 y3 x3 y2 + z 2 y22 + z 2 y12 − 2x3 y1 x1 y3 +
+x2 y32 + x2 y22 − 2x1 y2 x2 y1 + y 2 y12
= (x2 + y 2 + z 2 )(y12 + y22 + y32 ) − (x1 y1 + x2 y2 + x3 y3 )2
= ||→
−
x ||2||→
−
y ||2 − (→
−x •→
−y )2
= ||→
−x ||2||→
−y ||2 − ||→
−
x ||2 ||→
−
y ||2 cos2 (→
−
x ,→
\ −
y)
→
− 2 →− 2 2 →
−\ →
−
= || x || || y || sin ( x , y ),
whence the theorem follows. ❑

−
Theorem 79 has the following geometric significance: → x ×→
−
y is the area
of the parallelogram formed when the tails of the vectors are joined. See figure
1.70.
The following corollaries easily follow from Theorem 79.
→
−
80 Corollary Two non-zero vectors →
−
x ,→
−
y satisfy →
−
x ×→
−
y = 0 if and only if they
are parallel.
81 Corollary (Lagrange’s Identity)

||→
−
x ×→
−
y ||2 = ||x||2 ||y||2 − (→
−
x •→
−
y )2 .
The following result mixes the dot and the cross product.
→
− −
82 Theorem Let →−a, b, → c , be linearly independent vectors in R3 . The signed
→
−
volume of the parallelepiped spanned by them is (→−
a × b)•→ −c.
Proof: See figure 1.71. The area of the base of the parallelepiped is the
→
−
area of the parallelogram
determined by the vectors →−a and b , which
− →
− −
has area → a × b . The altitude of the parallelepiped is →c cos θ
→
−
where θ is the angle between → −
c and →−
a × b . The volume of the paral-
lelepiped is thus

→− − →
→ − →
− →
− →
−
a × b c cos θ = ( a × b ) • c ,
proving the theorem. ❑
☞
that
Since we may have used any of the faces of the parallelepiped, it follows
→
− →
− →
−
(→
−
a × b)•→
−
c =(b ×→
−
c)•→
−
a = (→
−
c ×→
−
a)• b.
In particular, it is possible to “exchange” the cross and dot products:
→
− →
− →
−
a •(b ×→ −c ) = (→
−
a × b)•→ −
c

Chapter 1
83 Example Consider the rectangular parallelepiped ABCDD ′C ′ B ′ A′ (figure 1.72)

with vertices A(2, 0, 0), B(2, 3, 0), C(0, 3, 0), D(0, 0, 0), D ′ (0, 0, 1), C ′ (0, 3, 1),
B ′ (2, 3, 1), A′ (2, 0, 1). Let M be the midpoint of the line segment joining the
vertices B and C.
1. Find the Cartesian equation of the plane containing the points A, D ′ , and
M.
2. Find the area of △AD ′ M .

←→
3. Find the parametric equation of the line AC′ .
4. Suppose that a line through M is drawn cutting the line segment [AC ′ ] in
←−→ ←→
N and the line DD′ in P . Find the parametric equation of MP.
Solution: ◮
1. Form the following vectors and find their cross product:

2 3 2 3 2 3
−2 −1 −3
−−→′ 6 7 −−→ 6 7 −−→ −−→ 6 7
AD = 4 0 5 , AM = 4 3 5 =⇒ AD′ × AM = 4−15 .
1 0 −6
The equation of the plane is thus

2 3 2 3
x−2 −3
6 7 6 7
4y − 05•4−15 = 0 =⇒ 3(x−2)+1(y)+6z = 0 =⇒ 3x+y+6z = 6.
z−0 −6
2. The area of the triangle is

−−→
−−→ √
AD′ × AM 1p 2 46
= 3 + 12 + 62 = .
2 2 2
2 3
−2
−−→ 6 7 ←→
3. We have AC′ = 4 3 5, and hence the line AC′ has parametric
1
equation
2 3
x 2 −2
6 7
y = 0 + t 4 3 5 =⇒ x = 2 − 2t, y = 3t, z = t.
z 0 1

Cross Product

0
4. Since P is on the z-axis, P = 0 for some real number z ′ > 0.
z′
←→
The parametric equation of the line MP is thus
2 3
x 1 −1
6 7
y = 3 +s 4−35 =⇒ x = 1−s y = 3−3s, z = sz ′ .
z 0 z′
←→ ←→
Since N is on both MP and AC′ we must have
2 − 2t = 1 − s, 3t = 3 − 3s, t = sz ′ .
1 2
Solving the first two equations gives s = ,t = . Putting this into
3 3
0
′
the third equation we deduce z = 2. Thus P = 0 and the
2
desired equation is
2 3
x 1 −1
6 7
y = 3 +s 4−35 =⇒ x = 1−s, y = 3−3s, z = 2s.
z 0 2
Homework
2 3 2 3
Problem 1.8.1 Prove that 1 1
6 7 6 7
parallel to the vectors 415 and 415 and
→
− →
− →
−
(→
−
a − b ) × (→
−
a + b ) = 2→
−
a × b. 1 0
passing through the point (0, −1, 2), by
→
− finding a normal to the plane.
Problem 1.8.2 Prove that →−
x × → −x = 0
follows from the anti-commutativity of the
cross product.
Problem 1.8.5 Find the equation of the

→
−
Problem 1.8.3 If b − → −
a and →−
c −→
−a are plane passing through the points (a, 0, a),
parallel and it is known that →
−
c × →
−a = (−a, 1, 0), and (0, 1, 2a) in R3 .
→
− → − →
− →
− → − →
− →
i − j and a × b = j + k , find b × −
→
− c.
Problem 1.8.4 Redo example 71, that is, Problem 1.8.6 Let a ∈ R. Find a vector
find the Cartesian equation of the plane of unit length simultaneously perpendicu-

Chapter 1
2 3 2 3
0 1 Problem 1.8.15 Consider the plane Π
6 7 6 7
lar to →
−
v = 4−a5 and →
−
w = 4a5. passing through the points A(6, 0, 0),
B(0, 4, 0) and C(0, 0, 3), as shewn in fig-
a 0 ure 1.73 below. The plane Π intersects a
3 × 3 × 3 cube, one of whose vertices is at
Problem 1.8.7 (Jacobi’s Identity) Let →−a , the origin and that has three of its edges on
→
− →
b,− c be vectors in R3 . Prove that the coordinate axes, as in the figure. This
→
− →
− →
− →
− intersection forms a pentagon CP QRS.
→
−
a ×( b ×→−
c )+ b ×(→ −
c ×→ −a )+→
−c ×(→−
a×b)= 0.
−→ −→
Problem 1.8.8 Let →−
x ∈ R3 , ||x|| = 1. Find 1. Find CA × CB.
→
− →
− →
−
||→
−
x × i ||2 + ||→
−
x × j ||2 + ||→
−x × k ||2 . −→ −→
2. Find CA × CB.
→
−
Problem 1.8.9 The vectors → −
a , b are con- 3. Find the parametric equation of the
stant vectors. Solve the equation line LC A joining C and A, with a pa-
→
− →
− →
−
a × (→−x × b ) = b × (→ −
x ×→ −
a ). rameter t ∈ R.
→
− − →
− 4. Find the parametric equation of the
Problem 1.8.10 If →
−
a + b +→
c = 0 , prove line LD E joining D and E, with a pa-
that rameter s ∈ R.
→
− →
− →
−
a × b = b ×→ −
c =→−
c ×→
−a.
5. Find the intersection point between
→
− − the lines LC A and LD E .
Problem 1.8.11 Assume →
−a •( b ×→
c ) 6= 0
and that
→
− →
− 6. Find the equation of the plane Π.
x = α→−
a + β b + γ→−c.
→
−
Find α, β, and γ in terms of →
−
a •(b ×→
−
c ). 7. Find the area of △ABC.
→
− − 8. Find the coordinates of the points P ,
Problem 1.8.12 The vectors → −a , b ,→
c are Q, R, and S.
constant vectors. Solve the system of equa-
tions
→
− 9. Find the area of the pentagon
2→−
x +→−
y ×→ −a = b , 3→ −y +→ −
x ×→ −
a =→−c, CP QRS.
→
− − → −
Problem 1.8.13 Let → −a , b ,→c , d be vec-
3
tors in R . Prove the following vector iden- z
tity, C
→
− →
− →
− → − →
− → − −
(→
−a × b )•(→
−c × d ) = (→
−a •→
−c )( b • d )−(→
−
a • d )( b •→
c ).
P
S
→
− − → −
Problem 1.8.14 Let → −a, b, →c , d , be vec-
3
tors in R . Prove that Q R B y
→
− →
− xA
(b ×→ −c ) • (→
−
a × d)
→
− →
−
+(→
−c ×→ −a)•(b × d)
→
− →
−
+(→
−a × b ) • (→−c × d)
= 0. Figure 1.73: Problem 1.8.15..

Matrices in three dimensions
1.9 Matrices in three dimensions

We will briefly introduce 3 × 3 matrices. Most of the material will flow like that
for 2 × 2 matrices.
84 Definition A linear transformation T : R3 → R3 is a function such that
T (a + b) = T (a) + T (b), T (λa) = λT (a),
for all points a, b in R3 and all scalars λ. Such a linear transformation has a
3 × 3 matrix representation whose columns are the vectors T (i), T (j), and T (k).
85 Example Consider L : R3 → R3 , with

x1 x1 − x2 − x3
L x2 = x1 + x2 + x3 .
x3 x3
➊ Prove that L is a linear transformation.
➋ Find the matrix corresponding to L under the standard basis.
Solution: ◮
➊ Let α ∈ R and let u, v be points in R3 . Then

u1 + v1
L(u + v) = L u2 + v2
u3 + v3

(u1 + v1 ) − (u2 + v2 ) − (u3 + v3 )
= (u1 + v1 ) + (u2 + v2 ) + (u3 + v3 )
u + v3
3

u1 − u2 − u3 v1 − v2 − v3
= u1 + u2 + u3 + v1 + v2 + v3
u3 3 v

u1 v1
= L u2 +L v2
u3 v3
= L(u) + L(v),

Chapter 1
and also

αu1
L(αu) = L αu2
αu3

α(u1 ) − α(u2 ) − α(u3 )
= α(u1 ) + α(u2 ) + α(u3 )
αu3

u1 − u2 − u3
= α u1 + u2 + u3
u3

u1
= αL u2
u3
= αL(u),
proving that L is a linear transformation.

1 1 0 −1 0
➋ We have L 0 = 1 ,L 1 = 1 , and L 0 =
0 0 0 0 1

−1
1 , whence the desired matrix is
1
2 3
1 −1 −1
6 7
41 1 1 5.
0 0 1
Addition, scalar multiplication, and matrix multiplication are defined for 3 × 3

matrices in a manner analogous to those operations for 2 × 2 matrices.
86 Definition Let A, B be 3 × 3 matrices. Then we define

" #
X
3
A + B = [aij + bij ], αA = [αaij ], AB = aik bkj .
k=1

Matrices in three dimensions
2 3 2 3
1 2 3 a b c
6 7 6 7
87 Example If A = 44 5 05, and B = 4a b 05, then
6 0 0 a 0 0
2 3 2 3
1+a 2+b 3+c 3 6 9
6 7 6 7
A + B = 44 + a 5 + b 0 5, 3A = 412 15 05 ,
6+a 0 0 18 0 0
2 3 2 3
a + 4b + 6c 2a + 5b 3a 6a 3b c
6 7 6 7
BA = 4 a + 4b 2a + 5b 3a5 , AB = 49a 9b 4c5 .
a 2a 3a 6a 6b 6c
88 Definition A scaling matrix is one of the form

2 3
a 0 0
6 7
Sa,b,c = 4 0 b 05 ,
0 0 c
where a > 0, b > 0, c > 0.
It is an easy exercise to prove that the product of two scaling matrices commutes.
89 Definition A rotation matrix about the z-axis by an angle θ in the counterclock-

wise sense is 2 3
cos θ − sin θ 0
6 7
Rz (θ) = 4 sin θ cos θ 05 .
0 0 1
A rotation matrix about the y-axis by an angle θ in the counterclockwise sense is
2 3
cos θ 0 − sin θ
6 7
Ry (θ) = 4 0 1 0 5.
sin θ 0 cos θ
A rotation matrix about the x-axis by an angle θ in the counterclockwise sense is

2 3
1 0 0
6 7
Rx (θ) = 40 cos θ − sin θ 5 .
0 sin θ cos θ
Easy to find counterexamples should convince the reader that the product of two
rotations in space does not necessarily commute.

Chapter 1
90 Definition A reflexion matrix about the x-axis is

2 3
−1 0 0
6 7
Rx = 4 0 1 05 .
0 0 1
A reflexion matrix about the y-axis is

2 3
1 0 0
6 7
Ry = 40 −1 05 .
0 0 1
A reflexion matrix about the z-axis is

2 3
1 0 0
6 7
Rz = 40 1 0 5.
0 0 −1
Homework
2 3
1 0 0 Problem 1.9.3 Consider the n × n matrix
6 7
Problem 1.9.1 Let A = 41 1 05. Find 2 3
1 1 1 1 ... 1 1
1 1 1 60
6 1 1 1 ... 1 17 7
A2 , A3 and A4 . Conjecture and, prove by 6 7
induction, a general formula for An . A=6 6
0 0 1 1 ... 1 1 7.
7
6 . . .. 7
4. . . . . . .. .. . . . . . . .5
0 0 0 0 ... 0 1
Problem 1.9.2 Let A ∈ M3×3 (R) be given
Describe A2 and A3 in terms of n.
by
2 3 Problem 1.9.4 Let x be a real number, and

1 1 1 put 2 3
6 7 1 0 x
A = 41 1 15 .
6 x2 7
1 1 1 m(x) = 64−x 1 − 2 5 .
7
0 0 1
Demonstrate, using induction, that An = If a, b are real numbers, prove that

3n−1 A for n ∈ N, n ≥ 1. 1. m(a)m(b) = m(a + b).
2. m(a)m(−a) = I3 , the 3 × 3 identity
matrix.

Determinants in three dimensions
1.10 Determinants in three dimensions

We now define2 the3 notion of
2 3
determinant
2 3
of a 3 × 3 matrix. Consider now the
a1 b1 c1
6 7 → − 6 7 → 6 7
vectors →
−
a = 4a2 5, b = 4 25
b , −
c = 3
4c2 5, in R , and the 3 × 3 matrix A =
a3 b3 c3
2 3
a1 b1 c1
6 7
4 a2 b2 c2 5. Since thanks to Theorem 82, the volume of the parallelepiped
a3 b3 c3
→
− −
spanned by these vectors is →
−
a •( b ×→ c ), we define the determinant of A, det A,
to be
2 3
a1 b1 c1
→
− − 6 7 →
−
D(→− c ) = det 4a2 b2 c2 5 = →
a , b ,→ −
a •(b ×→ −c ). (1.15)
a3 b3 c3
We now establish that the properties of the determinant of a 3 × 3 as defined

above are analogous to those of the determinant of 2 × 2 matrix defined in the
preceding chapter.
91 Theorem The determinant of a 3 × 3 matrix A as defined by (1.15) satisfies

the following properties:
1. D is linear in each of its arguments.

→
− −
2. If the parallelepiped is flat then the volume is 0, that is, if →
−
a, b, →
c , are
→
− →
− → −
linearly dependent, then D( a , b , c ) = 0.
→
− → − → −
3. D( i , j , k ) = 1, and accords with the right-hand rule.
Proof:
→
− − →
−
1. If D(→−
a , b ,→
c) = → −a •(b ×→ −c ), linearity of the first component
follows by the distributive law for the dot product:
→
− − →
−
D(→
−
a +→
−
a ′, b , →
c) = (→
−a +→−a ′) • ( b × →
−
c)
→
− →
− →
−
= a •(b × c)+ a′•(b ×→
→
− →
− −
c)
→
− →
− →
− →
− ′ →
− →
−
= D( a , b , c ) + D( a , b , c ),
and if λ ∈ R,
→
− − →
− − →
− − →
− −
D(λ→
−
a , b,→
c ) = (λ→
−
a )•( b ×→
c ) = λ((→
−
a )•( b ×→
c )) = λD(→
−
a , b,→
c ).
The linearity on the second and third component can be established

by using the distributive law of the cross product. For example, for

Chapter 1
the second component we have,

→
− →
− − →
− →
−
D(→−
a , b + b ′, →
c) = →−a • (( b + b ′ ) × →−
c)
→
− →
−
= a •(b × c + b ×→
→
− →
− ′ −c)
→
− →
−
= a • ( b × c ) + a • ( b′ × →
→
− →
− →
− −
c)
→
− →
− →− →
− →
−′ →
−
= D( a , b , c ) + D( a , b , c ),
and if λ ∈ R,
→
− − →
− →
− − →
− −
D(→
−a ,λ b ,→c)=→
−
a •((λ b )×→
−
c ) = λ(→
−
a •( b ×→
c )) = λD(→
−
a , b,→
c ).
→
− −
2. If →
−
a, b,→c , are linearly dependent, then they lie on the same plane
→
− −
and the parallelepiped spanned by them is flat, hence,D(→ −
a , b ,→
c)=
0.
→
− →
− →
− →
− →
−
3. Since j × k = i , and i • i = 1,
→
− → − →− →
− →
− →
− →
− → −
D( i , j , k ) = i • ( j × k ) = i • i = 1.
❑
Observe that
2 3
a1 b1 c1
6 7 →
− →
−
det 4a2 b2 c2 5 = a •(b ×→
−
c) (1.16)
a3 b3 c3
→
− →
− −
→
= →
−
a • (b2 c3 − b3 c2 ) i + (b3 c1 − b1 c3 ) j + (b1 c2 − b2 c1(1.17)
)k
= a1 (b2 c3 − b3 c2 ) + a2 (b3 c1 − b1 c3 ) + a3 (b1 c2 − b2 c1 ) (1.18)
" # " # " #
b2 c2 b1 c1 b1 c1
= a1 det − a2 det + a3 det , (1.19)
b3 c3 b3 c3 b2 c2
which reduces the computation of 3 × 3 determinants to 2 × 2 determinants.
2 3
1 2 3
6 7
92 Example Find det 44 5 65 .
7 8 9
Solution: ◮ Using (1.19), we have

" # " # " #
5 6 2 3 2 3
det A = 1 det − 4 det + 7 det
8 9 8 9 5 6
= 1(45 − 48) − 4(18 − 24) + 7(12 − 15)
= −3 + 24 − 21
= 0.
◭

Some Solid Geometry
Again, we may use the Maple packages linalg, LinearAlgebra, or Student[VectorCalculus]

to perform many of the vector operations. An example follows with linalg.
> with(linalg):
> a:=vector([-2,0,1]);
a := [−2, 0, 1]
> b:=vector([-1,3,0]);
b := [−1, 3, 0]
> crossprod(a,b);
[−3, −1, −6]
> dotprod(a,b);
2
> angle(a,b);
√
50
arccos
25
Homework
Problem 1.10.1 Prove that Problem 1.10.2 Prove that
2 3 2 3
1 1 1 a b c
6 7 6 7
det 4 a b c 5 = (b − c)(c − a)(a − b). det 4 b c a5 = 3abc − a3 − b3 − c3 .
a2 b2 c2 c a b
1.11 Some Solid Geometry

In this section we examine some examples and prove some theorems of three-
dimensional geometry.
D′
b
A′ C′ N M
b b
b b
′
B b
N
b
b
D
b
b M b
A C D′ b b b b
A
b
Q P
B
93 Example Cube ABCDD′ C′ B′ A in figure 1.74 has side of length a. M is the

−−→
midpoint of edge [BB′ ] and N is the midpoint of edge [B′ C′ ]. Prove that AD′ k
−−→
MN and find the area of the quadrilateral MND′ A.

Chapter 1
−−→ √

Solution: ◮ By the Pythagorean Theorem, AD′ = a 2. Because
−−→ −−→
they are diagonals that belong to parallel faces of the cube, AD′ k BC′ .
Now, M and N are the midpoints of the sides [B ′ B] and [B ′ C ′ ] of
−−→ −−→
△B ′ C ′ B, and hence MN k BC′ by example √ 14. The aforementioned

−−→ 1 −−→′ a 2 −−→
example also gives MN = AD = . In consequence, AD′ k
−−→ 2 2
MN. This means that the four points A, D′ , M, N are all on the same √
′
√ a 2
plane. Hence MND A is a trapezoid with bases of length a 2 and
2
(figure 1.75). From the figure
−−→ √
′ −→ 1 −−→′ −−→ a 2
D Q = AP = AD − MN = .
2 4
Also, by the Pythagorean Theorem,
r Ê √
−−→ −−→2 −−→2 a2 a 5
′ ′ ′
D N = D C + C′ N = a2 + = .
4 2
The height of this trapezoid is thus

Ê
−→ 5a2 a2 3a

NQ = − = √ .
4 8 2 2
The area of the trapezoid is finally,

√
√ a 2
3a a 2+ 9a2
√ · 2 = .
2 2 2 8
Let us prove a three-dimensional version of Thales’ Theorem.
94 Theorem (Thales’ Theorem) Of two lines are cut by three parallel planes, their
corresponding segments are proportional.
←→ ←→
Proof: See figure 1.76. Given the lines AB and CD, we must prove
that
AE CF
= .
EB FD
←→
Draw line AD cutting plane P 2 in G. The plane containing points A, B,
←→
and D intersects plane P 2 in the line EG. Similarly the plane containing
←→
points A, C, and D intersects plane P 2 in the line GF. Since P 2 and P 3

Some Solid Geometry
←→ ← →
are parallel planes, EG k BD, and so by Thales’ Theorem on the plane
(theorem 30),
AE AG
= .
EB GD
←→ ← →
Similarly, since P 1 and P 2 are parallel, AC k GF and
CF AG
= .
FD GD
It follows that
AE CF
= ,
EB FD
as needed to be shewn. ❑
P1 b
C
A D′
b
b
A′
b
C′
b
′
B
G F b b
P2E b b
b
b
D b
b M N b
A C
b
P 3B b b
D B
D′
b
A′ D ′′ C′
b b
b
B ′ Theorem in 3D.
Figure 1.76: Thales’ Figure 1.77: Example 95.
b
′′
A b
D C ′′ b
b
b
b
N b
M B ′′
b b
A C
b

Chapter 1
95 Example In cube ABCDD′ C′ B′ A′ of edge of length a, the points M and N are

−−→
located on diagonals [AB′ ] and [BC′ ] such that MN is parallel to theface ABCD
√ −−→ −
→
−→ 5 −→ AM BN
−
of the cube. If MN = AB, find the ratios −−→ and −
−→ .
3 AB′ BC′
Solution: ◮ There is a unique plane parallel P to face ABCD and

−−→
containing M. Since MN is parallel to face ABCD , P also contains N.
The intersection of P with the cube produces a lamina A′′ B′′ C′′ D′′ , as
in figure 1.78.
−→ −→ √
− −
First notice that AB′ = BC′ = a 2. Put
−
→
−
−−→

−→ −−→
−
AM MB′ AB′ − AM
−→ = x =⇒ −−→′ = − → = 1 − x.
− −
AB′ AB AB′
Now, as △B ′ AB ∼ △B ′ M B ′′ and △BC ′ B ′ ∼ △BN B ′′ ,

−−→ − → −−→ − →
−′′− −− −
MB′ B B′ MB′ MB′′ →
−−
− → = −−→′ , − → = −→ =⇒ MB′′ = (1 − x)a,
− −
AB′ BB AB′ AB
−−→ − → −−→ −−→
− ′′ −−→
BB′′ AM B N BB′′ ′′
− → = −−→′ , −−→ = − → =⇒ B N = xa.
− ′ ′ −
BB′ AB B C BB′
√
−−→ 5
Since MN = a, by the Pythagorean Theorem,
3
§ ª
−−→2 −
−−
→ 2 −−→2
′′ ′′ 5 2 1 2
MN = MB +B N =⇒ a = (1−x)2 a2 +x2 a2 =⇒ x ∈ , .
9 3 3
There are two possible positions for the segment, giving the solutions

−−→
−→

−−→
−→

AM BN 1 AM BN 2
− →′ = −−→′ = 3 , − →′ = −−→′ = 3 .
− −
AB BC AB BC
Homework

Cavalieri, and the Pappus-Guldin Rules
Problem 1.11.1 In a regular tetrahedron

Problem
1.11.2
In a tetrahedron
ABCD,
−→ −→ −→ −→ −→
with vertices A, B, C, D and with AB = AB = BC, AD = DC. Prove
a, points M and N are the midpoints of the −→ −→
that AC ⊥ BD.
edges [AB] and [CD], respectively.
1. Find the length of the segment [M N ].
2. Find the angle between the lines
Problem 1.11.3 In cube ABCDD′ C′ B′ A′
[M N ] and [BC].
of edge of length a, find the distance be-
−−→ −→ −−→
3. Prove that MN ⊥ AB and MN ⊥ tween the lines that contain the diagonals
−→
CD. [A′ B] and [AC].
1.12 Cavalieri, and the Pappus-Guldin Rules

96 Theorem (Cavalieri’s Principle) All planar regions with cross sections of pro-
portional length at the same height have area in the same proportion. All solids
with cross sections of proportional areas at the same height have their volume in
the same proportion.
Proof: We only provide the proof for the second statement, as the proof
for the first is similar. Cut any two such solids by horizontal planes
that produce cross sections of area A(x) and cA(x), where c > 0 is the
Z height x above Za fixed base.
constant of proportionality, at an arbitrary
x2 x2
From elementary calculus, we know that A(x)dx and cA(x)dx
x1 x1
give the volume of the portion of each solid
Z cut by all horizontal
Z planes
x2 x2
as x runs over some interval [x1 ; x2 ]. As A(x)dx = c A(x)dx
x1 x1
the corresponding volumes must also be proportional. ❑
97 Example Use Cavalieri’s Principle in order to deduce that the area enclosed
x2 y2
by the ellipse with equation 2 + = 1, a > 0, b > 0, is πab.
a b
Solution: ◮ Consider the circle with equation x2 + y 2 = a2 , as in

figure 1.79. Then, for y > 0,
p bp
y= a 2 − x2 , y= a 2 − x2 .
a
The corresponding ordinate for the ellipse and the circle are proportional,
and hence, the corresponding chords for the ellipse and the circle will be
proportional. By Cavalieri’s first principle,
b
Area of the ellipse = Area of the circle
a
b
= πa2
a
= πab.

Chapter 1
b b
b b b
x b
a
x
b
b b
a b
b
r b
a
x
Figure 1.79: Ellipse and circle. Figure 1.80: Punctured cylinder.

b b
a b
Figure 1.81: Hemisphere.
98 Example Use Cavalieri’s Principle in order to deduce that the volume of a

4
sphere with radius a is πa3 .
3
Solution: ◮ The following method is due to Archimedes, who was

so proud of it that he wanted a sphere inscribed in a cylinder on his
tombstone. We need to recall that the volume of a right circular cone
πa2 h
with base radius a and height h is .
3
Consider a hemisphere of radius a, as in figure 1.81. Cut a horizontal

slice at height x, producing a circle of radius r. By the Pythagorean
Theorem, x2 + r 2 = a2 , and so this circular slab has area πr 2 = π(a2 −
x2 ). Now, consider a punctured cylinder of base radius a and height a,
as in figure 1.80, with a cone of height a and base radius a cut from it.
A horizontal slab at height x is an annular region of area πa2 − πx2 ,
which agrees with a horizontal slab for the sphere at the same height.
By Cavalieri’s Principle,
Volume of the hemisphere = Volume of the punctured cylinder

πa3
= πa3 −
3
2πa3
= .
3

Dihedral Angles and Platonic Solids

2πa3 4πa3
It follows that the volume of the sphere is 2 = .◭
3 3
Essentially the same method of proof as Cavalieri’s Principle gives the next
result.
99 Theorem (Pappus-Guldin Rule) The area of the lateral surface of a solid of rev-
olution is equal to the product of the length of the generating curve on the side
of the axis of revolution and the length of the path described by the centre of
gravity of the generating curve under a full revolution. The volume of a solid of
revolution is equal to the product of the area of the generating plane on one side
of the revolution axis and the length of the path described by the centre of gravity
of the area under a full revolution about the axis.
r b
b
R
Figure 1.82: A torus.
100 Example Since the centre of gravity of a circle is at its centre, by the Pappus-
Guldin Rule, the surface area of the torus with the generating circle having radius
r, and radius of gyration R (as in figure 1.82) is (2πr)(2πR) = 4π 2 rR. Also, the
volume of the solid torus is (πr 2 )(2πR) = 2π 2 r 2 R.
Homework
Problem 1.12.1 Use the Pappus-Guldin of a right circular cone with base radius r
Rule to find the lateral area and the volume and height h.
1.13 Dihedral Angles and Platonic Solids

101 Definition When two half planes intersect in space they intersect on a line.
The portion of space bounded by the half planes and the line is called the dihedral
angle. The intersecting line is called the edge of the dihedral angle and each of
the two half planes of the dihedral angle is called a face. See figure 1.83.

Chapter 1
Figure 1.83: Dihedral Angles. Figure 1.84: Rectilinear of a Dihedral Angle.
102 Definition The rectilinear angle of a dihedral angle is the angle whose sides
are perpendicular to the edge of the dihedral angle at the same point, each on
each of the faces. See figure 1.84.
All the rectilinear angles of a dihedral angle measure the same. Hence the
measure of a dihedral angle is the measure of any one of its rectilinear angles.
In analogy to dihedral angles we now define polyhedral angles.
103 Definition The opening of three or more planes that meet at a common point
is called a polyhedral angle or solid angle. In the particular case of three planes,
we use the term trihedral angle. The common point is called the vertex of the
polyhedral angle. Each of the intersecting lines of two consecutive planes is
called an edge of the polyhedral angle. The portion of the planes lying between
consecutive edges are called the faces of the polyhedral angle. The angles formed
by adjacent edges are called face angles. A polyhedral angle is said to be convex
if the section made by a plane cutting all its edges forms a convex polygon.
In the trihedral angle of figure 1.85, V is the vertex, △V AB, △V BC, △V CA

are faces. Also, notice that in any polyhedral angle, any two adjacent faces form
a dihedral angle.
104 Theorem The sum of any two face angles of a trihedral angle is greater than
the third face angle.

V
b
V
b
A4
b
Dihedral Angles and Platonic Solids

A3 b
A D P
b b b
C A5 b
b
b
b b b
B
X b
A2
b VW Z
A1 b
b
Y
Figure 1.85: Trihedral Angle. Figure 1.86: Polyhedral Angle.

b b
Ak b Ak−1
Ak+1
Figure 1.87: A, Ak , Ak+1 are three

consecutive vertices.
Proof: Consider figure 1.85. If ∠ZV X is smaller or equal to in size

than either ∠XV Y or Y V Z, then we are done, so assume that, say,
∠ZV X > XV Y . We must demonstrate that
∠XV Y + ∠Y V Z > ∠ZV X.
Since we are assuming that ∠ZV X > XV Y , we may draw, in ∠XV Y

the line segment [V W ] such that ∠XV W = ∠XV Y .
Through any point D of the segment [V W ], draw △ADC on the plane

P containing the points V , X, Z. Take the point B ∈ [V Y ] so that
V D = V B. Consider now the plane containing the line segment [AC]
and the point B. Observe that △AV D ∼ = AV B. Hence AD = AB.
Now, by the triangle inequality in △ABC, AB + BC > CA. This
implies that ∠BV C > ∠DV C. Hence
∠AV B + ∠BV C = ∠AV D + ∠BV C

> ∠AV D + ∠DV C
= ∠AV C,
which proves that ∠XV Y + ∠Y V Z > ∠ZV X, as wanted. ❑
105 Theorem The sum of the face angles of any convex polyhedral angle is less
than 2π radians.
Proof: Let the polyhedral angle have n faces and vertex V . Let the
faces be cut by a plane, intersecting the edges at the points A1 , A2 ,
. . . An , say. An illustration can be seen in figure 1.86, where for con-
venience, we have depicted only five edges. Observe that the polygon
A1 A2 · · · An is convex and that the sum of its interior angles is π(n − 2).

Chapter 1
We would like to prove that
∠A1 V A2 + ∠A2 V A3 + ∠A3 V A4 + · · · + ∠An−1 V An + ∠An V A1 < 2π.
Now, let Ak−1 , Ak , Ak+1 be three consecutive vertices of of the poly-

gon A1 A2 · · · An . This notation means that Ak−1 Ak Ak+1 represents
any of the n triplets A1 A2 A3 , A2 A3 A4 , A3 A4 A5 , . . . , An−2 An−1 An ,
An−1 An A1 , An A1 A2 , that is, we let A0 = An , An+1 = A1 , An+2 =
A2 , etc. Consider the trihedral angle with vertex Ak and whose face
angles at Ak are ∠Ak−1 Ak Ak+1 , ∠V Ak Ak−1 , and ∠V Ak Ak+1 , as in
figure 1.87. Observe that as k ranges from 1 through n, the sum
X
∠Ak−1 Ak Ak+1 = π(n − 2),
1≤k≤n
being the sum of the interior angles of the polygon A1 A2 · · · An . By

Theorem 104,
∠V Ak Ak−1 + ∠V Ak Ak+1 > ∠Ak−1 Ak Ak+1 .
Thus
X X
V Ak Ak−1 + ∠V Ak Ak+1 > ∠Ak−1 Ak Ak+1 = π(n − 2).
1≤k≤n 1≤k≤n
Also, X
V Ak Ak+1 + ∠V Ak+1 Ak + ∠Ak V Ak+1 = πn,
1≤k≤n
since this is summing the sum of the angles of the n triangles of the
faces. But clearly
X X
V Ak Ak+1 = ∠V Ak+1 Ak ,
1≤k≤n 1≤k≤n
since one sum adds the angles in one direction and the other in the
opposite direction. For the same reason,
X X
V Ak Ak−1 = ∠V Ak Ak+1 .
1≤k≤n 1≤k≤n
Hence
X X
∠Ak V Ak+1 = πn − (V Ak Ak+1 + ∠V Ak+1 Ak )
1≤k≤n 1≤k≤n
X
= πn − (V Ak Ak+1 + ∠V Ak Ak−1 )
1≤k≤n
< πn − π(n − 2)
= 2π,
as we needed to shew. ❑

Spherical Trigonometry
106 Definition A Platonic solid is a polyhedron having congruent regular polygon

as faces and having the same number of edges meeting at each corner.
Suppose a regular polygon with n ≥ 3 sides is a face of a platonic solid with

m ≥ 3 faces meeting at a corner. Since each interior angle of this polygon
π(n − 2)
measures , we must have in view of Theorem 105,
n

π(n − 2)
m < 2π =⇒ m(n − 2) < 2n =⇒ (m − 2)(n − 2) < 4.
n
Since n ≥ 3 and m ≥ 3, the above inequality only holds for five pairs (n, m).
Appealing to Euler’s Formula for polyhedrons, which states that V + F = E + 2,
where V is the number of vertices, F is the number of faces, and E is the number
of edges of a polyhedron, we obtain the values in the following table.
m n S E F Name of regular Polyhedron.
3 3 4 6 4 Tetrahedron or regular Pyramid.
4 3 8 12 6 Hexahedron or Cube.
3 4 6 12 8 Octahedron.
5 3 20 30 12 Dodecahedron.
3 5 12 30 20 Icosahedron.
Thus there are at most five Platonic solids. That there are exactly five can
be seen by explicit construction. Figures 1.88 through 1.92 depict the Platonic
solids.
1.14 Spherical Trigonometry

Consider a point B(x, y, z) in Cartesian coordinates. From O(0, 0, 0) we draw a
straight line to B(x, y, z), and let its distance be ρ. We measure its inclination
from the positive z-axis, let us say it is an angle of φ, φ ∈ [0; π] radians, as in
figure 1.93. Observe that z = ρ cos φ. We now project the line segment [OB]
onto the xy-plane in order to find the polar coordinates of x and y. Let θ be
angle that this projection makes with the positive x-axis. Since OP = ρ sin φ we
find x = ρ cos θ sin φ, y = ρ sin θ sin φ.

Chapter 1
Figure 1.90: Octahe-

dron.
Figure 1.88: Tetrahe- Figure 1.89: Cube or Figure 1.91: Dodeca-
dron. hexahedron. hedron
Figure 1.92: Icosahe-

dron.
107 Definition Given a point (x, y, z) in Cartesian coordinates, its spherical coor-
dinates are given by
x = ρ cos θ sin φ, y = ρ sin θ sin φ, z = ρ cos φ.
Here φ is the polar angle, measured from the positive z-axis, and θ is the az-
imuthal angle, measured from the positive x-axis. By convention, 0 ≤ θ ≤ 2π
and 0 ≤ φ ≤ π.
Spherical coordinates are extremely useful when considering regions which

are symmetric about a point.
108 Definition If a plane intersects with a sphere, the intersection will be a circle.
If this circle contains the centre of the sphere, we call it a great circle. Otherwise
we talk of a small circle. The axis of any circle on a sphere is the diameter of the
sphere which is normal to the plane containing the circle. The endpoints of such
a diameter are called the poles of the circle.
☞ The radius of a great circle is the radius of the sphere. The poles of a great
circle are equally distant from the plane of the circle, but this is not the case in
a small circle. By the pole of a small circle, we mean the closest pole to the
plane containing the circle. A pole of a circle is equidistant from every point of
the circumference of the circle.
109 Definition Given the centre of the sphere, and any two points of the surface
of the sphere, a plane can be drawn. This plane will be unique if and only if the
points are not diametrically opposite. In the case where the two points are not
diametrically opposite, the great circle formed is split into a larger and a smaller
arc by the two points. We call the smaller arc the geodesic joining the two points.
If the two points are diametrically opposite then every plane containing the line

forms with the sphere a great circle, and the arcs formed are then of equal length.
In this case we take any such arc as a geodesic.
110 Definition A spherical triangle is a triangle on the surface of a sphere all

whose vertices are connected by geodesics. The three arcs of great circles which
form a spherical triangle are called the sides of the spherical triangle; the angles
formed by the arcs at the points where they meet are called the angles of the
spherical triangle.
b
B
φ
ρ
ρ cos φ
ρ
θ
si
n
φ
Figure 1.93: Spherical Coordinates.
If A, B, C are the vertices of a spherical triangle, it is customary to label the

opposite arcs with the same letter name, but in lowercase.
☞ A spherical triangle has then six angles: three vertex angles ∠A, ∠B, ∠C,
and three arc angles, ∠a, ∠b, ∠c. Observe that if O is the centre of the sphere
then
−→ −→ −→ −→ −→ −→
∠a = ∠ OB, OC , ∠b = ∠ OC, OA , ∠c = ∠ OA, OB ,
and
−→ −→ −→ −→ −→ −→ −→ −→ −→ −→ −→ −→
∠A = ∠ OA × OB, OA × OC , ∠B = ∠ OB × OC, OB × OA , ∠C = ∠ OC × OA, OC × OB .

Chapter 1
111 Theorem Let △ABC be a spherical triangle. Then
cos a cos b + sin a sin b cos C = cos c.
Proof: Consider a spherical triangle ABC with A(x1 , y1 , z1 ), B(x2 , y2 , z2 ),

and let O be the centre and ρ be the radius of the sphere. In spherical
coordinates this is, say,
z1 = ρ cos θ1 , x1 = ρ sin θ1 cos φ1 , y1 = ρ sin θ1 sin φ1 ,

z2 = ρ cos θ2 , x2 = ρ sin θ2 cos φ2 , y2 = ρ sin θ2 sin φ2 ;
By a rotation we may assume that the z-axis passes through C. Then

the following quantities give the square of the distance of the line seg-
ment [AB]:
(x1 − x2 )2 + (y1 − y2 )2 + (z1 − z2 )2 , ρ2 + ρ2 − 2ρ2 cos ∠ (AOB) .
Since x21 + y12 + z12 = ρ2 , x22 + y22 + z22 = ρ2 , we gather that
x1 x2 + y1 y2 + z1 z2 = ρ2 cos ∠ (AOB) .
Therefore we obtain
cos θ2 cos θ1 + sin θ2 sin θ1 cos(φ1 − φ2 ) = cos ∠ (AOB) ,
that is,
cos a cos b + sin a sin b cos C = cos c.
❑
Figure 1.94: Theorem 112.
112 Theorem Let I be the dihedral angle of two adjacent faces of a regular poly-
hedron. Then
I cos π
n
sin = π .
2 sin m
Proof: See figure 1.94. Let AB be the edge common to the two adjacent
faces, C and D the centres of the faces; bisect AB at E, and join CE
and DE; CE and DE will be perpendicular to AB, and the angle CED
is the angle of inclination of the two adjacent faces; we shall denote it
by I. In the plane containing CE and DE draw CO and DO at right
angles to CE and DE respectively, and meeting at O; about O as centre
describe a sphere meeting OA, OC, OE at a, c, e respectively, so that

cae forms a spherical triangle. Since AB is perpendicular to CE and

DE, it is perpendicular to the plane CED, therefore the plane AOB
which contains AB is perpendicular to the plane CED; hence the angle
cea of the spherical triangle is a right angle. Let m be the number of
sides in each face of the polyhedron, n the number of the plane angles
2π π
which form each solid angle. Then the angle ace = ACE = = ;
2m m
and the angle cae is half one of the n equal angles formed on the sphere
2π π
round a, that is, cae = = . From the right-angled triangle cae
2n n
cos cae = cos cOe sin ace,

π π I π
that is cos = cos − sin ;
n 2 2 m
π
I cos
sin = n
therefore
2 π .
sin
m
❑
113 Theorem Let r and R be, respectively, the radii of the inscribed and circum-
scribed spheres of a regular polyhedron. Then
a π I a I π
r= cot tan , R= tan tan .
2 m 2 2 2 n
Here a is the length of any edge of the polyhedron, and I is the dihedral angle of
any two faces.
Proof: Let the edge AB = a, let OC = r and OA = R, so that r is the

radius of the inscribed sphere, and R is the radius of the circumscribed
sphere. Then
a π
CE = AE cot ACE = cot ,
2 m
I a π I
r = CE tan CEO = CE tan = cot tan ;
2 2 m 2
π π
also r = R cos aOc = R cot eca cot eac = R cot cot ;
m n
π π a I π
therefore R = r tan tan = tan tan .
m n 2 2 n
❑
From the above formulæ we now easily find that the volume of the pyramid which
r ma2 π
has one face of the polyhedron for base and O for vertex is cot , and
3 4 m

Chapter 1
mF ra2 π
therefore the volume of the polyhedron is . cot
m12
ma2 π
Furthermore, the area of one face of the polyhedron is cot , and therefore
4 m
mF a2 π
the surface area of the polyhedron is cot .
4 m
Homework
Problem 1.14.1 The four vertices of a reg- Problem 1.14.4 Consider an octahedron
ular tetrahedron are whose edge√measures a. Shew that its vol-
Ǒ Ǒ √
a3 2
1 −1/2 ume is , its surface area is 2a2 3,
√ 3
V1 = 0 , V2 = 3/2 , and √
that the radius of the inscribed sphere
0 0 a 6
is .
Ǒ Ǒ 6
−1/2 0
√
V3 = − 3/2 , V4 = 0 . Problem 1.14.5 Consider a dodecahedron
√ whose edge measures a. Shew that its vol-
0 2
a3 √
What is the cosine of the dihedral angle be- ume is 15 + 7 5 , its surface area is
tween any pair of faces of the tetrahedron? È 4 √
3a2 25 + 10 5, and that the radius of the
Ê É
Problem 1.14.2 Consider a tetrahedron a 1
inscribed sphere is 10 + 22 .
4 5
√ measures a. Shew that its vol-
whose edge
a3 2 √
ume is , its surface area is a2 3, and
12 Problem 1.14.6 Consider an icosahedron
that
√ the radius of the inscribed sphere is whose edge measures a. Shew that its vol-
5a3 √
a 6
.
12 ume is 3 + 5 , its surface area is
√ 12
5a2 3, and that
a √ √ of the inscribed
the radius
Problem 1.14.3 Consider a cube whose sphere is 5 3 + 15 .
edge measures a. Shew that its volume is 12
a3 , its surface area is 6a2 , and that the ra-
a
dius of the inscribed sphere is .
2
1.15 Canonical Surfaces

In this section we consider various surfaces that we shall periodically encounter
in subsequent sections. Just like in one-variable Calculus it is important to iden-
tify the equation and the shape of a line, a parabola, a circle, etc., it will become
important for us to be able to identify certain families of often-occurring surfaces.
We shall explore both their Cartesian and their parametric form. We remark that
in order to parametrise curves (“one-dimensional entities”) we needed one pa-
rameter, and that in order to parametrise surfaces we shall need to parameters.

Canonical Surfaces
Let us start with the plane. Recall that if a, b, c are real numbers, not all
2 3
a
6 7
zero, then the Cartesian equation of a plane with normal vector 4 b 5 and passing
c
through the point (x0 , y0 , z0 ) is
a(x − x0 ) + b(y − y0 ) + c(z − z0 ) = 0.
If we know that the vectors →

−
u and →
−v are on the plane (parallel to the plane) then
with the parameters p, qthe equation of the plane is
x − x0 = pu1 + qv1 ,
y − y0 = pu2 + qv2 ,
z − z0 = pu3 + qv3 .
114 Definition A surface S consisting of all lines parallel to a given line ∆ and
passing through a given curve Γ is called a cylinder. The line ∆ is called the
directrix of the cylinder.
☞ To recognise whether a given surface is a cylinder we look at its Cartesian

equation. If it is of the form f (A, B) = 0, where A, B are secant planes, then
the curve is a cylinder. Under these conditions, the lines generating S will be
parallel to the line of equation A = 0, B = 0. In practice, if one of the variables
x, y, or z is missing, then the surface is a cylinder, whose directrix will be the
axis of the missing coordinate.
x y y
x
Figure 1.95: Circular cylinder x2 + y2 = 1. Figure 1.96: The parabolic cylinder z = y2 .
115 Example Figure 1.95 shews the cylinder with Cartesian equation x2 +y 2 = 1.
One starts with the circle x2 + y 2 = 1 on the xy-plane and moves it up and down
the z-axis. A parametrisation for this cylinder is the following:
x = cos v, y = sin v, z = u, u ∈ R, v ∈ [0; 2π].

Chapter 1
The Maple commands to graph this surface are:

> with(plots):
> implicitplot3d(xˆ2+yˆ2=1,x=-1..1,y=-1..1,z=-10..10);
> plot3d([cos(s),sin(s),t],s=-10..10,t=-10..10,numpoints=5001);
The method of parametrisation utilised above for the cylinder is quite useful
when doing parametrisations in space. We refer to it as the method of cylindrical
coordinates. In general, we first find the polar coordinates of x, y in the xy-plane,
and then lift (x, y, 0) parallel to the z-axis to (x, y, z):
x = r cos θ, y = r sin θ, z = z.
See figure 1.97.
z
(r cos θ, r sin θ, z)
b
r
θ
x y
Figure 1.97: Cylindrical Coordinates.
116 Example Figure 1.96 shews the parabolic cylinder with Cartesian equation
z = y 2 . One starts with the parabola z = y 2 on the yz-plane and moves it up and
down the x-axis. A parametrisation for this parabolic cylinder is the following:
x = u, y = v, z = v2 , u ∈ R, v ∈ R.
The Maple commands to graph this surface are:

> with(plots):
> implicitplot3d(z=yˆ2,x=-10..10,y=-10..10,z=-10..10,numpoints=5001);
> plot3d([t,s,sˆ2],s=-10..10,t=-10..10,numpoints=5001,axes=boxed);
117 Example Figure 1.98 shews the hyperbolic cylinder with Cartesian equation
x2 − y 2 = 1. One starts with the hyperbola x2 − y 2 on the xy-plane and moves
it up and down the z-axis. A parametrisation for this parabolic cylinder is the
following:
x = ± cosh v, y = sinh v, z = u, u ∈ R, v ∈ R.
We need a choice of sign for each of the portions. We have used the fact that
cosh2 v − sinh2 v = 1. The Maple commands to graph this surface are:

Canonical Surfaces
> with(plots):
> implicitplot3d(xˆ2-yˆ2=1,x=-10..10,y=-10..10,z=-10..10,numpoints=5001);
> plot3d({[-cosh(s),sinh(s),t],[cosh(s),sinh(s),t]},
> s=-2..2,t=-10..10,numpoints=5001,axes=boxed);
118 Definition Given a point Ω ∈ R3 (called the apex) and a curve Γ (called the
generating curve), the surface S obtained by drawing rays from Ω and passing
through Γ is called a cone.
☞ A B
In practice, if the Cartesian equation of a surface can be put into the form
f( , ) = 0, where A, B, C, are planes secant at exactly one point, then the
C C
surface is a cone, and its apex is given by A = 0, B = 0, C = 0.
119 Example The surface in R3 implicitly given by
z 2 = x2 + y 2
x 2 y 2
is a cone, as its equation can be put in the form −1 = 0. Considering
+
z z
the planes x = 0, y = 0, z = 0, the apex is located at (0, 0, 0). The graph is shewn
in figure 1.100.
120 Definition A surface S obtained by making a curve Γ turn around a line ∆ is

called a surface of revolution. We then say that ∆ is the axis of revolution. The
intersection of S with a half-plane bounded by ∆ is called a meridian.
☞ If the Cartesian equation of S can be put in the form f (A, Σ) = 0, where

A is a plane and Σ is a sphere, then the surface is of revolution. The axis of S
is the line passing through the centre of Σ and perpendicular to the plane A.
121 Example Find the equation of the surface of revolution generated by revolv-
ing the hyperbola
x2 − 4z 2 = 1
about the z-axis.
Solution: ◮ Let (x, y, z) be a point on S. If this point were on the

xz plane, it would be on the p hyperbola, and its distance to the axis
of rotation would be |x| = 1 + 4z 2 . Anywhere else, the distance of
(x, y, z) to the axis of rotation is the same as the distance of (x, y, z) to

Chapter 1
Figure 1.98: The hyperbolic cylinder

Figure 1.99: The torus.
x2 − y2 = 1.
x2 y2 z2
Figure 1.100: Cone + 2 = 2.
a2 b c
È
(0, 0, z), that is x2 + y 2 . We must have
È p
x2 + y 2 = 1 + 4z 2 ,
which is to say
x2 + y 2 − 4z 2 = 1.
This surface is called a hyperboloid of one sheet. See figure 1.104.
Observe that when z = 0, x2 + y 2 = 1 is a circle on the xy plane. When
x = 0, y 2 − 4z 2 = 1 is a hyperbola on the yz plane. When y = 0,
x2 − 4z 2 = 1 is a hyperbola on the xz plane.
A parametrisation for this hyperboloid is

p p
x= 1 + 4u2 cos v, y= 1 + 4u2 sin v, z = u, u ∈ R, v ∈ [0; 2π].
122 Example The circle (y − a)2 + z 2 = r 2 , on the yz plane (a, r are positive real
numbers) is revolved around the z-axis, forming a torus T . Find the equation of
this torus.
Solution: ◮ Let (x, y, z) be a point on T . If this point were on the

yz plane, it would be on the circle, and the
p of the distance to the axis
of rotation would be y = a + sgn(y − a) r 2 − z 2 , where sgn(t) (with
sgn(t) = −1 if t < 0, sgn(t) = 1 if t > 0, and sgn(0) = 0) is the sign of
t. Anywhere else, the distance fromÈ(x, y, z) to the z-axis is the distance
of this point to the point (x, y, z) : x2 + y 2 . We must have
p p
x2 +y 2 = (a+sgn(y−a) r 2 − z 2 )2 = a2 +2asgn(y−a) r 2 − z 2 +r 2 −z 2 .

Canonical Surfaces
Rearranging
p
x2 + y 2 + z 2 − a2 − r 2 = 2asgn(y − a) r 2 − z 2 ,
or
(x2 + y 2 + z 2 − (a2 + r 2 ))2 = 4a2 r 2 − 4a2 z 2
since (sgn(y − a))2 = 1, (it could not be 0, why?). Rearranging again,

(x2 + y 2 + z 2 )2 − 2(a2 + r 2 )(x2 + y 2 ) + 2(a2 − r 2 )z 2 + (a2 − r 2 )2 = 0.
The equation of the torus thus, is of fourth degree, and its graph appears
in figure 1.99.
A parametrisation for the torus generated by revolving the circle (y −

a)2 + z 2 = r 2 around the z-axis is
x = a cos θ+r cos θ cos α, y = a sin θ+r sin θ cos α, z = r sin α,
with (θ, α) ∈ [−π; π]2 .
◭
z z
x y y y
x x
Figure 1.101: Paraboloid z = Figure 1.102: Hyperbolic Figure 1.103: Two-sheet hy-
x2 y2 x2 y2 z2 x2 y2
+ 2. paraboloid z = 2 − 2 perboloid 2 = 2 + 2 +1.
a2 b a b c a b
123 Example The surface z = x2 +y 2 is called an elliptic paraboloid. The equation

clearly requires that z ≥ 0. For fixed z = c, c > 0, x2 + y 2 = c is a circle. When
y = 0, z = x2 is a parabola on the xz plane. When x = 0, z = y 2 is a parabola
on the yz plane. See figure 1.101. The following is a parametrisation of this
paraboloid:
√ √
x = u cos v, y = u sin v, z = u, u ∈ [0; +∞[, v ∈ [0; 2π].

Chapter 1
124 Example The surface z = x2 − y 2 is called a hyperbolic paraboloid or saddle.

If z = 0, x2 − y 2 = 0 is a pair of lines in the xy plane. When y = 0, z = x2
is a parabola on the xz plane. When x = 0, z = −y 2 is a parabola on the yz
plane. See figure 1.102. The following is a parametrisation of this hyperbolic
paraboloid:
x = u, y = v, z = u2 − v 2 , u ∈ R, v ∈ R.
125 Example The surface z 2 = x2 + y 2 + 1 is called an hyperboloid of two sheets.

For z 2 − 1 < 0, x2 + y 2 < 0 is impossible, and hence there is no graph when
−1 < z < 1. When y = 0, z 2 − x2 = 1 is a hyperbola on the xz plane. When
x = 0, z 2 − y 2 = 1 is a hyperbola on the yz plane. When z = c is a constant
c > 1, then the x2 + y 2 = c2 − 1 are circles. See figure 1.103. The following is a
parametrisation for the top sheet of this hyperboloid of two sheets
x = u cos v, y = u sin v, z = u2 + 1, u ∈ R, v ∈ [0; 2π]
and the following parametrises the bottom sheet,
x = u cos v, y = u sin v, z = −u2 − 1, u ∈ R, v ∈ [0; 2π],
126 Example The surface z 2 = x2 + y 2 − 1 is called an hyperboloid of one sheet.

For x2 + y 2 < 1, z 2 < 0 is impossible, and hence there is no graph when
x2 + y 2 < 1. When y = 0, z 2 − x2 = −1 is a hyperbola on the xz plane.
When x = 0, z 2 − y 2 = −1 is a hyperbola on the yz plane. When z = c is a
constant, then the x2 + y 2 = c2 + 1 are circles See figure 1.104. The following is
a parametrisation for this hyperboloid of one sheet
p p
x= u2 + 1 cos v, y= u2 + 1 sin v, z = u, u ∈ R, v ∈ [0; 2π],
Figure 1.104: One-sheet hyperboloid x2 y2 z2

z2 x2 y2 Figure 1.105: Ellipsoid + 2 + 2 = 1.
2
= 2 + 2 − 1. a2 b c
c a b

Canonical Surfaces
x2 y2
127 Example Let a, b, c be strictly positive real numbers. The surface + +
a2 b2
2 2 2
z x y
= 1 is called an ellipsoid. For z = 0, + 1 is an ellipse on the xy
c2 a2 b2
2 2
x z
plane.When y = 0, + = 1 is an ellipse on the xz plane. When x = 0,
a2 c2
2 2
z y
+ = 1 is an ellipse on the yz plane. See figure 1.105. We may parametrise
c2 b2
the ellipsoid using spherical coordinates:
x = a cos θ sin φ, y = b sin θ sin φ, z = c cos φ, θ ∈ [0; 2π], φ ∈ [0; π].
Homework
Problem 1.15.1 Find the equation of the Problem 1.15.7 Shew that the surface in
surface of revolution S generated by revolv- R3 implicitly defined by
ing the ellipse 4x2 + z 2 = 1 about the z-
axis. x4 + y 4 + z 4 − 4xyz(x + y + z) = 1
is a surface of revolution, and find its axis

Problem 1.15.2 Find the equation of the of revolution.
surface of revolution generated by revolving
the line 3x + 4y = 1 about the y-axis . Problem 1.15.8 Shew that the surface S in
R3 given implicitly by the equation
Problem 1.15.3 Describe the sur- 1 1 1
face parametrised by ϕ(u, v) 7→ + + =1
x−y y−z z−x
(v cos u, v sin u, au), (u, v) ∈ (0, 2π) ×
(0, 1), a > 0. is a cylinder and find the direction of its di-
rectrix.
Problem 1.15.4 Describe the sur-

face parametrised by ϕ(u, v) = Problem 1.15.9 Shew that the surface S in
(au cos v, bu sin v, u2 ), (u, v) ∈ R3 implicitly defined as
(1, +∞) × (0, 2π), a, b > 0.
xy + yz + zx + x + y + z + 1 = 0
is of revolution and find its axis.

Problem 1.15.5 Consider the spherical
cap defined by
√Problem 1.15.10 Demonstrate that the
S = {(x, y, z) ∈ R3 : x2 +y 2 +z 2 = 1, z ≥ 1/ surface
2}. in R3 given implicitly by
Parametrise S using Cartesian, Spherical, z 2 − xy = 2z − 1

and Cylindrical coordinates.
is a cone
Problem 1.15.6 Demonstrate that the sur- Problem 1.15.11 (Putnam Exam 1970)
face in R3 Determine, with proof, the radius of the
2
+y 2 +z 2 largest circle which can lie on the ellipsoid
S : ex − (x + z)e−2xz = 0,
x2 y2 z2
implicitly defined, is a cylinder. 2
+ 2 + 2 = 1, a > b > c > 0.
a b c

y2
z = 2, x2 + =1
z 4
Chapter 1
Problem 1.15.12 The hyperboloid of one

z = 0, 4x2 + y 2 = 1
sheet in figure 1.106 has the property that x y
if it is cut by planes at z = ±2, its pro-
jection on the xy plane produces the ellipse y2
x2 +
y2
= 1, and if it is cut by a plane at
z = −2, x2 + =1
4 4
z = 0, its projection on the xy plane pro-
duces the ellipse 4x2 + y 2 = 1. Find its Figure 1.106: Problem 1.15.12.
equation.
1.16 Parametric Curves in Space

In analogy to curves on the plane, we now define curves in space.
128 Definition Let [a; b] ⊆ R. A parametric curve representation r of a curve Γ is

a function r : [a; b] → R3 , with

x(t)
r(t) = y(t) ,
z(t)
and such that r([a; b]) = Γ. r(a) is the initial point of the curve and r(b) its
terminal point. A curve is closed if its initial point and its final point coincide.
The trace of the curve r is the set of all images of r, that is, Γ. The length of the
curve is Z
→
d−r .
Γ
x y
Figure 1.107: Helix.

Parametric Curves in Space
129 Example The trace of

→
− →
− →
−
r(t) = i cos t + j sin t + k t
is known as a cylindrical helix. To find the length of the helix as t traverses the
interval [0; 2π], first observe that
→ √
d−
x = (sin t)2 + (− cos t)2 + 1dt = 2dt,
and thus the length is
Z 2π √ √
2dt = 2π 2.
0
The Maple commands to graph this curve and to find its length are:
> with(plots):
> spacecurve([cos(t),sin(t),t],t=0..2*Pi,axes=normal);
> PathInt(1,[x,y,z]=Path(<cos(t),sin(t),t>,0..2*Pi));
130 Example Find a parametric representation for the curve resulting by the in-
tersection of the plane 3x + y + z = 1 and the cylinder x2 + 2y 2 = 1 in R3 .
Solution: ◮ The projection of the intersection of the plane 3x+y+z = 1

and the cylinder is the ellipse x2 + 2y 2 = 1, on the xy-plane. This ellipse
can be parametrised as
√
2
x = cos t, y = sin t, 0 ≤ t ≤ 2π.
2
From the equation of the plane,
√
2
z = 1 − 3x − y = 1 − 3 cos t − sin t.
2
Thus we may take the parametrisation
2 3
2 3 cos t
x(t) 6 √ 7
6 7 6 2 7
r(t) = 4y(t)5 = 6
6
sin t 7.
7
4
2 √ 5
z(t) 2
1 − 3 cos t − sin t
2
◭
131 Example Let a, b, c be strictly positive real numbers. Consider the the region
©
R = (x, y, z) ∈ R3 : |x| ≤ a, |y| ≤ b, z = c .
A point P moves along the ellipse
x2 y2
+= 1, z =c+1
a2 b2
once around, and acts as a source light projecting a shadow of R onto the xy-
plane. Find the area of this shadow.

z
b
b
b
Chapter 1
b b
b b
b
x y
Figure 1.108: Problem 1.16.4. Figure 1.109: Problem 1.16.4.
Solution: ◮ First consider the same problem as P moves around the

circle
x2 + y 2 = 1, z = c + 1
©
and the region is R′ = (x, y, z) ∈ R3 : |x| ≤ 1, |y| ≤ 1, z = c .
For fixed P (u, v, c + 1) on the circle, the image of R′ (a 2 × 2 square)

on the xy plane is a (2c + 2) × (2c + 2) square with centre at the point
Q(−cu, −cv, 0) (figure 1.109). As P moves along the circle, Q moves
along the circle with equation x2 +y 2 = c2 on the xy-plane (figure 1.109),
being the centre of a (2c + 2) × (2c + 2) square. This creates a region as
in figure 1.110, where each quarter circle has radius c, and the central
square has side 2c + 2, of area
πc2 + 4(c + 1)2 + 8c(c + 1).
Resizing to a region
©
R = (x, y, z) ∈ R3 : |x| ≤ a, |y| ≤ b, z = c ,
and an ellipse
x2 y2
+
= 1, z = c + 1
a2 b2
we use instead of c + 1, a(c + 1) (parallel to the x-axis) and b(c + 1)
(parallel to the y-axis), so that the area shadowed is
πab(c + 1)2 + 4ab(c + 1)2 + 4abc(c + 1) = c2 ab(π + 12) + 16abc + 4ab.
◭

Multidimensional Vectors
Homework
Problem 1.16.1 Let C be the curve in R3 Problem 1.16.4 Give a parametrisation for
defined by the part of the ellipsoid
x = t2 , y = 4t3/2 , z = 9t, t ∈ [0; +∞[. y2 z2

x2 + + =1
9 4
Calculate the distance along C from (1, 4, 9)
to (16, 32, 36). which lies on top of the plane x + y + z = 0.
Problem 1.16.2 Consider the surfaces in Problem 1.16.5 Let P be the point (2, 0, 1)
R3 implicitly defined by and consider the curve C : z = y 2 on the
yz-plane. As a point Q moves along C , let
z−x2 −y 2 −1 = 0, z+x2 +y 2 −3 = 0. R be the point of intersection of ← →
PQ and
Describe, as vividly as possible these sur- the xy-plane. Graph all points R on the
faces and their intersection, if they at all in- xy-plane.
tersect. Find a parametric equation for the
curve on which they intersect, if they at all Problem 1.16.6 Let a be a real number pa-
intersect. rameter, and consider the planes
P1 : ax + y + z = −a,
Problem 1.16.3 Consider the space curve
2 3 P2 : x − ay + az = −1.
t4
6 1 + t2 7 Let l be their intersection line.
→
− 6 t3 7
r : t 7→ 6 7
6 1 + t2 7 . 1. Find a direction vector for l.
4 5
t2 2. As a varies through R, l describes a
1 + t2 surface S in R3 . Let (x, y, z) be the
point of intersection of this surface
Let tk , 1 ≤ k ≤ 4 be non-zero real num- and the plane z = c. Find an equa-
bers. Prove that → −
r (t1 ), →
−
r (t2 ), →
−
r (t3 ), and tion relating x and y.
→
−r (t4 ) are coplanar if and only if
3. Find the volume bounded by the two
1 1 1 1 planes, x = 0, and x = 1, and the
+ + + = 0.
t1 t2 t3 t4 surface S as c varies.
1.17 Multidimensional Vectors

We briefly describe space in n-dimensions. The ideas expounded earlier about
the plane and space carry almost without change.
132 Definition Rn is the n-dimensional space, the collection

8 9
>
>
x1 >
>
>
< >
=
x2
Rn = .. : xk ∈ R .
>
> . >
>
>
: >
;
xn

Chapter 1
→
− →
−
−
a and b are two vectors in Rn their vector sum →
−
a + b is defined
by the coordinatewise addition
2 3
a1 + b1
6 7
→
− 6 a2 + b2 7
→
− 6 7
a + b =6 .. 7. (1.20)
6 . 7
4 5
an + bn
134 Definition A real number α ∈ R will be called a scalar. If α ∈ R and →

−
a ∈ Rn
we define scalar multiplication of a vector and a scalar by the coordinatewise
multiplication 2 3
αa1
6 7
6 αa2 7
6 7
α→
−
a = 6 . 7. (1.21)
6 .. 7
4 5
αan
135 Definition The standard ordered basis for Rn is the collection of vectors
{→
−
e 1, →
−
e 2, . . . , →
−
e n, }
with 2 3
0
6.7
6.7
6.7
→
− 6 7
ek=6 7
6 17
6.7
6.7
4.5
0
(a 1 in the k slot and 0’s everywhere else). Observe that
2 3
α1
6 7
X
n 6 α2 7
6 7
αk →
−
e k = 6 . 7.
6 .. 7
k=1 4 5
αn
→
−
136 Definition Given vectors →
−
a , b of Rn , their dot product is
→
− X
n
→
−
a•b = ak bk .
k=1
We now establish one of the most useful inequalities in analysis.

137 Theorem (Cauchy-Bunyakovsky-Schwarz Inequality) Let →

−
x and →
−
y be any two
n
vectors in R . Then we have
− →
|→
−
x •→
−
y | ≤ →
x −
y .
Proof: Since the norm of any vector is non-negative, we have

→
−
x + t→
−
y ≥ 0 ⇐⇒ (→
−x + t→ −
y )•(→
−x + t→
−
y)≥0
⇐⇒ →
−x x + 2t x y + t2 →
• →
− →
− • →
− − y •→
−
y ≥0
→ 2
⇐⇒ −
x 2 →
− →
− 2 →
−
+ 2t x y + t y ≥ 0.
•
This last expression is a quadratic polynomial in t which is always non-

negative. As such its discriminant must be non-positive, that is,
− 2 → 2 − →
(2→
−
x •→
−
y )2 − 4(→ y ) ≤ 0 ⇐⇒ |→
x )(− −
x •→
−
y | ≤ →
x −
y ,
giving the theorem. ❑
☞ The above proof works not just for Rn but for any vector space (cf. below)
that has an inner product.
The form of the Cauchy-Bunyakovsky-Schwarz most useful to us will be

!1/2 !1/2
Xn X
n X
n

x k yk ≤ x2k yk2 , (1.22)

k=1 k=1 k=1
for real numbers xk , yk .
→
−
138 Corollary (Triangle Inequality) Let → −
a and b be any two vectors in Rn . Then
we have − → −
→
− → − →
a + b ≤ a + b .
Proof:
→
− →
− →
−
||→
−
a + b ||2 = (→
−a + b )•(→ −a + b)
→
− →
− →−
= →
−a •→
−a + 2→ −a•b + b•b
→
− →
−
≤ ||→
−a ||2 + 2||→−
a |||| b || + || b ||2
→
−
= (||→
−a || + || b ||)2 ,
from where the desired result follows. ❑
Again, the preceding proof is valid in any vector space that has a norm.

−
x and →
−
y be two non-zero vectors in a vector space over the
real numbers. Then the angle (→
−
x ,→
\ −
y ) between them is given by the relation
→
−x •→ −y
cos (→
−
x ,→
\ −
y ) = → → .
x −
− y

Chapter 1
This expression agrees with the geometry in the case of the dot product for R2
and R3 .
140 Example Assume that ak , bk , ck , k = 1, . . . , n, are positive real numbers.

Shew that !4 ! ! !2
n X n n X n X X
ak bk ck ≤ a4k b4k c2k .
k=1 k=1 k=1 k=1
X
n
Solution: ◮ Using CBS on (ak bk )ck once we obtain
k=1
!1/2 !1/2
X
n X
n X
n
ak bk ck ≤ a2k b2k c2k .
k=1 k=1 k=1
!1/2
X
n
Using CBS again on a2k b2k we obtain
k=1
!1/2 !1/2
X
n X
n X
n
ak bk ck ≤ a2k b2k c2k
k=1 k=1 k=1
!1/4 !1/4 !1/2
Xn X
n X
n
≤ a4k b4k c2k ,
k=1 k=1 k=1
which gives the required inequality. ◭

We now use the CBS inequality to establish another important inequality. We
need some preparatory work.
X
n
141 Lemma Let ak > 0, qk > 0, with qk = 1. Then
k=1
!1/x
X
n X
n
lim log qk a x
k = qk log ak .
x→0
k=1 k=1
Proof: Recall that log(1 + x) ∼ x as x → 0. Thus

!1/x Pn
X
n
log qk a x
k=1 k
lim log qk a x
k = lim
x→0 x→0 x
k=1 Pn x
k=1 qk (ak − 1)
= lim
x→0 x
Xn
(ax − 1)
= lim qk k
x→0
k=1
x
X
n
= qk log ak .
k=1

142 Theorem (Arithmetic Mean-Geometric Mean Inequality) Let ak ≥ 0. Then
√ a1 + a2 + · + an
n
a1 a2 · · · an ≤ .
n
Proof: If bk ≥ 0, then by CBS

!2
1 X
n
1 Xn
p
bk ≥ bk . (1.23)
n k=1
n k=1
Successive applications of (1.23) yield the monotone decreasing sequence

!2 !4
1 Xn
1 Xn
√ 1 Xn
√
ak ≥ ak ≥ 4
ak ≥ ...,
n k=1 n k=1 n k=1
which by Lemma 141 has limit

!
1 X
n
√
exp log ak = n
a1 a2 · · · an ,
n k=1
giving
√ a1 + a2 + · + an
n
a1 a2 · · · an ≤ ,
n
as wanted. ❑
143 Example For any positive integer n > 1 we have
1 · 3 · 5 · · · · (2n − 1) < nn .
For, by AMGM,
n n
1 + 3 + 5 + · · · + (2n − 1) n2
1 · 3 · 5 · · · · (2n − 1) < = = nn .
n n
Notice that since the factors are unequal we have strict inequality.
144 Definition Let a1 > 0, a2 > 0, . . . , an > 0. Their harmonic mean is given by
n
.
1 1 1
+ + ··· +
a1 a2 an
As a corollary to AMGM we obtain

Chapter 1
145 Corollary (Harmonic Mean-Geometric Mean Inequality) Let b1 > 0, b2 > 0, . . . , bn >
0. Then
n
≤ (b1 b2 · · · bn )1/n .
1 1 1
+ + ··· +
b1 b2 bn
1
Proof: This follows by putting ak = in Theorem 142 . For then
bk
1 1 1
1/n + + ··· +
1 1 1 b b2 bn
··· ≤ 1 .
b1 b2 bn n
Combining Theorem 142 and Corollary 145, we deduce
146 Corollary (Harmonic Mean-Arithmetic Mean Inequality) Let b1 > 0, b2 > 0, . . . , bn >
0. Then
n b1 + b2 + · · · + bn
≤ .
1 1 1 n
+ + ··· +
b1 b2 bn
147 Example Let ak > 0, and s = a1 + a2 + · · · + an . Prove that
X
n
s n2
≥
k=1
s − ak n−1
and
X
n
ak n
≥ .
k=1
s − ak n−1
s
Solution: ◮ Put bk = . Then
s − ak
X
n
1 X
n
s − ak
= =n−1
k=1
bk k=1
s
and from Corollary 146,

Pn s
n k=1
s − ak
≤ ,
n−1 n
from where the first inequality is proved.

s ak
Since −1= , we have
s − ak s − ak
X
n n
X
ak s
= −1
k=1
s − ak k=1
s − ak
Xn
s
= −n
k=1
s − ak
2
n
≥ −n
n−1
n
= .
n−1
◭
Homework
Problem 1.17.1 The Arithmetic Mean Geo- Problem 1.17.3 (USAMO 1978) Let
metric Mean Inequality says that if ak ≥ 0 a, b, c, d, e be real numbers such that
then
a1 + a2 + · · · + an a+b+c+d+e = 8, a2 +b2 +c2 +d2 +e2 = 16.
(a1 a2 · · · an )1/n ≤ .
n
Equality occurs if and only if a1 = a2 = Maximise the value of e.
. . . = an . In this exercise you will follow the
steps of a proof by George Pólya. Problem 1.17.4 Find all positive real num-
1. Prove that ∀x ∈ R, x ≤ ex−1 . bers
2. Put a1 ≤ a2 ≤ . . . ≤ an
nak
Ak = , such that
a1 + a2 + · · · + an
and Gn = a1 a2 · · · an . Prove that X
n
X
n
X
n
n ak = 96, a2k = 144, a3k = 216.

n Gn
A1 A2 · · · An = , k=1 k=1 k=1
(a1 + a2 + · · · + an )n
and that
Problem 1.17.5 Demonstrate that for inte-
A1 + A2 + · · · + An = n. ger n > 1 we have,
3. Deduce that n
n+1
a1 + a2 + · · · + an n n! < .
Gn ≤ . 2
n
4. Prove the AMGM inequality by assem-
Problem 1.17.6 Let f (x) = (a + x)5 (a −
bling the results above.
x)3 , x ∈ [−a; a]. Find the maximum value
of de f using the AM-GM inequality.
Problem 1.17.2 Demonstrate that if
x1 , x2 , . . . , xn , are strictly positive real
numbers then Problem
1.17.7
n Prove that the sequence
x = 1 + 1 , n = 1, 2, . . . is strictly in-
1 1 1 n
(x1 + x2 + . . . + xn ) + + ... + ≥ n2 . n
x1 x2 xn creasing.

2 Differentiation
2.1 Some Topology

148 Definition Let a ∈ Rn and let ε > 0. An open ball centred at a of radius ε is
the set
Bε (a) = {x ∈ Rn : ||x − a|| < ε}.
An open box is a Cartesian product of open intervals
]a1 ; b1 [×]a2; b2 [× · · · ×]an−1; bn−1 [×]an ; bn [,
where the ak , bk are real numbers.
b b
b2 − a2
ε
b
b
(a1 , a2 )
b b
b1 − a1
Figure 2.1: Open ball in R2 . Figure 2.2: Open rectangle in R2 .
97
z z
ε
b (a1 , a2 , a3 ) Some Topology
x y x y
Figure 2.3: Open ball in R3 . Figure 2.4: Open box in R3 .
149 Example An open ball in R is an open interval, an open ball in R2 is an open

disk (see figure 2.1) and an open ball in R3 is an open sphere (see figure 2.3). An
open box in R is an open interval, an open box in R2 is a rectangle without its
boundary (see figure 2.2) and an open box in R3 is a box without its boundary
(see figure 2.4).
150 Definition A set O ⊆ Rn is said to be open if for every point belonging to it

we can surround the point by a sufficiently small open ball so that this balls lies
completely within the set. That is, ∀a ∈ O ∃ε > 0 such that Bε (a) ⊆ O.
151 Example The open interval ] − 1; 1[ is open in R. The interval ] − 1; 1] is not

open, however, as no interval centred at 1 is totally contained in ] − 1; 1].
152 Example The region ] − 1; 1[×]0; +∞[ is open in R2 .
©
153 Example The ellipsoidal region (x, y) ∈ R2 : x2 + 4y 2 < 4 is open in R2 .
The reader will recognise that open boxes, open ellipsoids and their unions and
finite intersections are open sets in Rn .
154 Definition A set F ⊆ Rn is said to be closed in Rn if its complement Rn \ F

is open.
155 Example The closed interval [−1; 1] is closed in R, as its complement, R \

[−1; 1] =] − ∞; −1[∪]1; +∞[ is open in R. The interval ] − 1; 1] is neither open
nor closed in R, however.
156 Example The region [−1; 1] × [0; +∞[×[0; 2] is closed in R3 .
Homework
Problem 2.1.1 Determine whether the fol- 4. D = {(x, y) ∈ R2 : x2 ≤ y ≤ x}
lowing subsets of R2 are open, closed, or
5. E = {(x, y) ∈ R2 : xy > 1}
neither, in R2 .
6. F = {(x, y) ∈ R2 : xy ≤ 1}
1. A = {(x, y) ∈ R2 : |x| < 1, |y| < 1}
2. B = {(x, y) ∈ R2 : |x| < 1, |y| ≤ 1} 7. G = {(x, y) ∈ R2 : |y| ≤ 9, x < y 2 }
3. C = {(x, y) ∈ R2 : |x| ≤ 1, |y| ≤ 1}

Chapter 2
Problem 2.1.2 (Putnam Exam 1969) Let finite collection of open disks in R2 whose
p(x, y) be a polynomial with real coeffi- union contains a set E ⊆ R2 . Shew that
cients in the real variables x and y, defined there is a pairwise disjoint subcollection
over the entire plane R2 . What are the pos- Dk , k ≥ 1 in F such that
sibilities for the image (range) of p(x, y)?
[
n
E⊆ 3Dj .
Problem 2.1.3 (Putnam 1998) Let F be a j =1
2.2 Multivariable Functions

Let A ⊆ Rn . For most of this course, our concern will be functions of the form
f : A → Rm .
If m = 1, we say that f is a scalar field. If m ≥ 2, we say that f is a vector field.

We would like to develop a calculus analogous to the situation in R. In partic-
ular, we would like to examine limits, continuity, differentiability, and integrabil-
ity of multivariable functions. Needless to say, the introduction of more variables
greatly complicates the analysis. For example, recall that the graph of a function
f : A → Rm , A ⊆ Rn . is the set
{(x, f (x)) : x ∈ A)} ⊆ Rn+m .
If m + n > 3, we have an object of more than three-dimensions! In the case

n = 2, m = 1, we have a tri-dimensional surface. We will now briefly examine
this case.
157 Definition Let A ⊆ R2 and let f : A → R be a function. Given c ∈ R, the

level curve at z = c is the curve resulting from the intersection of the surface
z = f (x, y) and the plane z = c, if there is such a curve.
158 Example The level curves of the surface f (x, y) = x2 +y 2 (an elliptic paraboloid)
are the concentric circles
x2 + y 2 = c, c > 0.
Homework
Problem 2.2.1 Sketch the level curves for 6. (x, y) →
7 sin(x2 + y 2 )
the following maps. 7. (x, y) → 7 cos(x2 − y 2 )
1. (x, y) 7→ x + y
2. (x, y) 7→ xy Problem 2.2.2 Sketch the level surfaces
for the following maps.
3. (x, y) 7→ min(|x|, |y|)
1. (x, y, z) 7→ x + y + z
4. (x, y) 7→ x3 − x 2. (x, y, z) 7→ xyz
5. (x, y) 7→ x2 + 4y 2 3. (x, y, z) 7→ min(|x|, |y|, |z|)

Limits
4. (x, y, z) 7→ x2 + y 2 6. (x, y, z) 7→ sin(z − x2 − y 2 )
5. (x, y, z) 7→ x2 + 4y 2 7. (x, y, z) 7→ x2 + y 2 + z 2
2.3 Limits
We will start with the notion of limit.
159 Definition A function f : Rn → Rm is said to have a limit L ∈ Rm at a ∈ Rn if

∀ǫ > 0∃δ > 0 such that
0 < ||x − a|| < δ =⇒ ||f (x) − L|| < ǫ.
In such a case we write,

lim f (x) = L.
x→a
The notions of infinite limits, limits at infinity, and continuity at a point, are
analogously defined. Limits in more than one dimension are perhaps trickier to
find, as one must approach the test point from infinitely many directions.
x2 y
160 Example Find lim .
(x,y)→(0,0) x2 + y 2
Solution: ◮ We use the sandwich theorem. Observe that 0 ≤ x2 ≤

x2
x2 + y 2 , and so 0 ≤ 2 ≤ 1. Thus
x + y2

x2 y
lim 0≤ lim ≤ lim |y|,
(x,y)→(0,0) (x,y)→(0,0) x2 + y 2 (x,y)→(0,0)
and hence
x2 y
lim = 0.
(x,y)→(0,0) x2 + y 2
The Maple commands to graph this surface and find this limits ap-
pear below. Notice that Maple is unable to find the limit and so returns
unevaluated.
> with(plots):
> plot3d(xˆ2*y/(xˆ2+yˆ2),x=-10..10,y=-10..10,axes=boxed,color=xˆ2+yˆ2);
> limit(xˆ2*y/(xˆ2+yˆ2),x=0,y=0);
◭
x5 y 3
(x,y)→(0,0) x6 + y 4

Chapter 2
x2 y x5 y3
Figure 2.5: (x, y) 7→ . Figure 2.6: (x, y) 7→ .
x2 + y2 x6 + y4
Solution: ◮ Either |x| ≤ |y| or |x| ≥ |y|. Observe that if |x| ≤ |y|,
then
x5 y 3 y8
≤ = y4 .
x6 + y 4 y4
If |y| ≤ |x|, then
x5 y 3 x8
2
x6 + y 4 ≤ x6 = x .
Thus
x5 y 3
4 2 4 2
x6 + y 4 ≤ max(y , x ) ≤ y + x −→ 0,
as (x, y) → (0, 0).

Aliter: Let X = x3 , Y = y 2 .

x5 y 3 X 5/3 Y 3/2
= .
x6 + y 4 X2 + Y 2
Passing to polar coordinates X = ρ cos θ, Y = ρ sin θ, we obtain

x5 y 3 X 5/3 Y 3/2
= = ρ5/3+3/2−2| cos θ|5/3| sin θ|3/2 ≤ ρ7/6 → 0,
x6 + y 4 X2 + Y 2
as (x, y) → (0, 0). ◭
1+x+y
(x,y)→(0,0) x2 − y 2
Solution: ◮ When y = 0,
1+x
→ +∞,
x2
as x → 0. When x = 0,
1+y
→ −∞,
−y 2
as y → 0. The limit does not exist. ◭

Limits
xy 6
(x,y)→(0,0) x6 + y 8
Solution: ◮ Putting x = t4 , y = t3 , we find
xy 6 1
= → +∞,
x6 + y8 2t2
as t → 0. But when y = 0, the function is 0. Thus the limit does not

exist. ◭
((x − 1)2 + y 2 ) loge ((x − 1)2 + y 2 )

(x,y)→(0,0) |x| + |y|
Solution: ◮ When y = 0 we have
2(x − 1)2 ln(|1 − x|) 2x

∼− ,
|x| |x|
and so the function does not have a limit at (0, 0). ◭
sin(x4 ) + sin(y 4 )
165 Example Find lim p .
(x,y)→(0,0) x4 + y 4
Solution: ◮ sin(x4 ) + sin(y 4 ) ≤ x4 + y 4 and so

È
sin(x4 ) + sin(y 4 )
p ≤ x4 + y 4 → 0,
x4 + y 4
as (x, y) → (0, 0). ◭
sin x − y
(x,y)→(0,0) x − sin y

Chapter 2
Solution: ◮ When y = 0 we obtain

sin x
→ 1,
x
as x → 0. When y = x the function is identically −1. Thus the limit
does not exist. ◭
If f : R2 → R, it may be that the limits

lim lim f (x, y) , lim lim f (x, y) ,
y→y0 x→x0 x→x0 y→y0
both exist. These are called the iterated limits of f as (x, y) → (x0 , y0 ). The
following possibilities might occur.

1. If lim f (x, y) exists, then each of the iterated limits lim lim f (x, y)
(x,y)→(x0 ,y0 ) y→y0 x→x0

and lim lim f (x, y) exists.
x→x0 y→y0

2. If the iterated limits exist and lim lim f (x, y) 6= lim lim f (x, y)
then lim f (x, y) does not exist.
(x,y)→(x0 ,y0 )

3. It may occur that lim lim f (x, y) = lim lim f (x, y) , but that
lim f (x, y) does not exist.
(x,y)→(x0 ,y0 )
4. It may occur that lim f (x, y) exists, but one of the iterated limits
(x,y)→(x0 ,y0 )
does not.
Homework
Problem 2.3.1 Sketch the domain of defi- sin xy
p Problem 2.3.5 Find lim .
nition of (x, y) 7→ 4 − x2 − y 2 . (x,y )→(0,2) x
Problem 2.3.2 Sketch the domain of defi- Problem 2.3.6 For what c will the function
nition of (x, y) 7→ log(x + y). ¨ p
1 − x2 − 4y 2 , if x2 + 4y 2 ≤ 1,
f (x, y) =
c, if x2 + 4y 2 > 1
Problem 2.3.3 Sketch the domain of defi-
1
nition of (x, y) 7→ 2 . be continuous everywhere on the xy-plane?
x + y2
Problem 2.3.4 Find lim (x2 + Problem 2.3.7 Find

(x,y )→(0,0)
1 p 1
y 2 ) sin . lim x2 + y 2 sin .
xy (x,y )→(0,0) x2 + y 2

Definition of the Derivative
Problem 2.3.8 Find Problem 2.3.12 Let

8
lim
max(|x|, |y|)
p . < x sin 1 + y sin 1 if x 6= 0, y 6= 0
(x,y )→(+∞,+∞) x4 + y 4 f (x, y) = x y
: 0 otherwise
Problem 2.3.9 Find
Prove that lim f (x, y) exists, but
2x2 sin y 2 + y 4 e−|x|
(x,y )→(0,0)

lim p . that the iterated limits lim lim f (x, y)
(x,y )→(0,0 x2 + y 2
x→0 y →0
and lim lim f (x, y) do not exist.
y →0 x→0
Problem 2.3.10 Demonstrate that
x2 y 2 z 2 Problem 2.3.13 Prove that

lim = 0.
(x,y ,z)→(0,0,0) x 2 + y2 + z2
x2 y 2
lim lim 2 2 = 0,
x→0 y →0 x y + (x − y)2
Problem 2.3.11 Prove that
and that
x−y x−y
lim lim = 1 = − lim lim . x2 y 2
x→0 y →0 x + y y →0 x→0 x + y
lim lim = 0,
y →0 x→0 x y + (x − y)2
2 2
x−y
Does lim exist?. x2 y 2
(x,y )→(0,0) x+y but still lim does
(x,y )→(0,0) x 2 y 2 + (x − y)2
not exist.
2.4 Definition of the Derivative

Before we begin, let us introduce some necessary notation. Let f : R → R be
a function. We write f (h) = o (h) if f (h) goes faster to 0 than h, that is, if
f (h)
lim = 0. For example, h3 + 2h2 = o (h), since
h→0 h
h3 + 2h2
lim = lim h2 + 2h = 0.
h→0 h h→0
We now define the derivative in the multidimensional space Rn . Recall that in

one variable, a function g : R → R is said to be differentiable at x = a if the limit
g(x) − g(a)
lim = g ′ (a)
x→a x−a
exists. The limit condition above is equivalent to saying that
g(x) − g(a) − g ′ (a)(x − a)

lim = 0,
x→a x−a
or equivalently,
g(a + h) − g(a) − g ′ (a)(h)
lim = 0.
h→0 h

Chapter 2
We may write this as

g(a + h) − g(a) = g ′ (a)(h) + o (h) .
The above analysis provides an analogue definition for the higher-dimensional
case. Observe that since we may not divide by vectors, the corresponding defini-
tion in higher dimensions involves quotients of norms.
167 Definition Let A ⊆ Rn . A function f : A → Rm is said to be differentiable at

a ∈ A if there is a linear transformation, called the derivative of f at a, Da (f ) :
Rn → Rm such that
||f (x) − f (a) − Da (f )(x − a)||
lim = 0.
x→a ||x − a||
Equivalently, f is differentiable at a if there is a linear transformation Da (f ) such
that
f (a + h) − f (a) = Da (f )(h) + o (||h||) ,
as h → 0.
☞ The condition for differentiability at a is equivalent to

f (x) − f (a) = Da (f )(x − a) + o (||x − a||) ,
as x → a.
168 Theorem If A is an open set in definition 167, Da (f ) is uniquely determined.
Proof: Let L : Rn → Rm be another linear transformation satisfying

definition 167. We must prove that ∀v ∈ Rn , L(v) = Da (f )(v). Since A
is open, a + h ∈ A for sufficiently small ||h||. By definition, as h → 0,
we have
f (a + h) − f (a) = Da (f )(h) + o (||h||) .
and
f (a + h) − f (a) = L(h) + o (||h||) .
Now, observe that
Da (f )(v) − L(v) = Da (f )(h) − f (a + h) + f (a) + f (a + h) − f (a) − L(h).
By the triangle inequality,
||Da (f )(v) − L(v)|| ≤ ||Da (f )(h) − f (a + h) + f (a)||

+||f (a + h) − f (a) − L(h)||
= o (||h||) + o (||h||)
= o (||h||) ,
as h → 0 This means that
||L(v) − Da (f )(v)|| → 0,
i.e., L(v) = Da (f )(v), completing the proof. ❑

Definition of the Derivative
☞ If A = {a}, a singleton, then Da (f ) is not uniquely determined. For ||x −

a|| < δ holds only for x = a, and so f (x) = f (a). Any linear transformation T
will satisfy the definition, as T (x − a) = T (0) = 0, and
||f (x) − f (a) − T (x − a)|| = ||0|| = 0,
identically.
169 Example If L : Rn → Rm is a linear transformation, then Da (L) = L, for any

a ∈ Rn .
Solution: ◮ Since Rn is an open set, we know that Da (L) uniquely

determined. Thus if L satisfies definition 167, then the claim is estab-
lished. But by linearity
||L(x) − L(a) − L(x − a)|| = ||L(x) − L(a) − L(x) + L(a)|| = ||0|| = 0,
whence the claim follows. ◭
170 Example Let

R3 × R3 → R
f :
(→
−
x ,→
−
y) 7→ →
−
x •→
−
y
be the usual dot product in R3 . Shew that f is differentiable and that

→
− → − − •→
→ − →
− •→
−
D(→
− y )f ( h , k ) = x k + h y .
x ,→
−
→
− − →
− →
− →
−
f (→
−
x + h,→
y + k ) − f (→
−
x ,→
−
y) = (→
−x + h )•(→
−
y + k)−→−
x •→
−
y
→
− →
− →
− → − →
→ −
= x•y + x•k + h•y + h•k −→
→
− →
− − −
x •→
−
y
→
− →
− →
− →
− →
− →
−
= x•k + h•y + h•k.
→
− →− →
− → −
As ( h , k ) → ( 0 , 0 ),
→we
have by the Cauchy-Buniakovskii-Schwarz
− •→
→ − − →− →
−
inequality, | h k | ≤ h k = o h , which proves the asser-
tion. ◭
Just like in the one variable case, differentiability at a point, implies continuity
at that point.
171 Theorem Suppose A ⊆ Rn is open and f : A → Rn is differentiable on A.

Then f is continuous on A.
Proof: Given a ∈ A, we must shew that
lim f (x) = f (a).

x→a

Chapter 2
Since f is differentiable at a we have
f (x) − f (a) = Da (f )(x − a) + o (||x − a||) ,
and so
f (x) − f (a) → 0,
as x → a, proving the theorem. ❑
Homework
Problem 2.4.1 Let L : R3 → R3 be a linear Problem 2.4.2 → Let
f : Rn → R, n ≥
transformation and →
− −
1, f ( x ) = x be the usual norm in Rn ,
− 2
with → x = → −x •→−
x . Prove that
R3 → R3
F : → . →
−
−
x 7→ →
−
x × L(→
−
x) x •→
−v
Dx (f )(→
−
v ) = →
− ,
x
Shew that F is differentiable and that
→
−
→
− →
− →
− for →
−
x 6= 0 , but that f is not differentiable
Dx (F )( h ) = →
−
x × L( h ) + h × L(→
−
x ). →
−
at 0 .
2.5 The Jacobi Matrix

We now establish a way which simplifies the process of finding the derivative of
a function at a given point.
172 Definition Let A ⊆ Rn , f : A → Rm , and put

2 3
f1 (x1 , x2 , . . . , xn )
6 7
6 f2 (x1 , x2 , . . . , xn ) 7
6 7
f (x) = 6 .. 7.
6 . 7
4 5
fm (x1 , x2 , . . . , xn )
∂fi
Here fi : Rn → R. The partial derivative (x) is defined as
∂xj
∂fi fi (x1 , x2 , . . . , xj + h, . . . , xn ) − fi (x1 , x2 , . . . , xj , . . . , xn )

(x) = lim ,
∂xj h→0 h
whenever this limit exists.
To find partial derivatives with respect to the j-th variable, we simply keep
the other variables fixed and differentiate with respect to the j-th variable.

The Jacobi Matrix
173 Example If f : R3 → R, and f (x, y, z) = x + y 2 + z 3 + 3xy 2 z 3 then
∂f
(x, y, z) = 1 + 3y 2 z 3 ,
∂x
∂f
(x, y, z) = 2y + 6xyz 3 ,
∂y
and
∂f
(x, y, z) = 3z 2 + 9xy 2 z 2 .
∂z
The Maple commands to find these follow.

> f:=(x,y,z)->x+yˆ2+zˆ3+3*x*yˆ2*zˆ3;
> diff(f(x,y,z),x);
> diff(f(x,y,z),y);
> diff(f(x,y,z),z);
Since the derivative of a function f : Rn → Rm is a linear transformation,

it can be represented by aid of matrices. The following theorem will allow us to
determine the matrix representation for Da (f ) under the standard bases of Rn
and Rm .
174 Theorem Let

2 3
f1 (x1 , x2 , . . . , xn )
6 7
6 f2 (x1 , x2 , . . . , xn ) 7
6 7
f (x) = 6 .. 7.
6 . 7
4 5
fm (x1 , x2 , . . . , xn )
Suppose A ⊆ Rn is an open set and f : A → Rm is differentiable. Then each

∂fi
partial derivative (x) exists, and the matrix representation of Dx (f ) with
∂xj
respect to the standard bases of Rn and Rm is the Jacobi matrix
2 3
∂f1 ∂f1 ∂f1
6 ∂x (x) (x) ··· (x)7
6 1 ∂x2 ∂xn 7
6 ∂f2 ∂f2 ∂f2 7
6 (x) (x) ··· (x)7
6 7
f ′ (x) = 6 ∂x1 ∂x2 ∂xn 7.
6 .. .. .. .. 7
6 . . . . 7
6 7
4 ∂fn ∂fn ∂fn 5
(x) (x) ··· (x)
∂x1 ∂x2 ∂xn
Proof: Let →−e j , 1 ≤ j ≤ n, be the standard basis for Rn . To obtain the

Jacobi matrix, we must compute Dx (f )(→ −e j ), which will give us the j-th

Chapter 2
column of the Jacobi matrix. Let f ′ (x) = (Jij ), and observe that
2 3
J1j
6 7
6 J2j 7
6 7
Dx (f )(→
−
e j) = 6 . 7 .
6 .. 7
4 5
Jnj
and put y = x + ε→
−
e j , ε ∈ R. Notice that
||f (y) − f (x) − Dx (f )(y − x)||

||y − x||
||f (x1 , x2 , . . . , xj + h, . . . , xn ) − f (x1 , x2 , . . . , xj , . . . , xn ) − εDx (f )(→
−
e j )||
= .
|ε|
Since the sinistral side → 0 as ε → 0, the so does the i-th component of

the numerator, and so,
|fi (x1 , x2 , . . . , xj + h, . . . , xn ) − fi (x1 , x2 , . . . , xj , . . . , xn ) − εJij |

→ 0.
|ε|
This entails that

fi (x1 , x2 , . . . , xj + ε, . . . , xn ) − fi (x1 , x2 , . . . , xj , . . . , xn ) ∂fi
Jij = lim = (x) .
ε→0 ε ∂xj
This finishes the proof. ❑
☞ Strictly speaking, the Jacobi matrix is not the derivative of a function at

a point. It is a matrix representation of the derivative in the standard basis of
Rn . We will abuse language, however, and refer to f ′ when we mean the Jacobi
matrix of f .
175 Example Let f : R3 → R2 be given by
f (x, y) = (xy + yz, loge xy).
Compute the Jacobi matrix of f .
Solution: ◮ The Jacobi matrix is the 2 × 3 matrix

2 3
∂f1 ∂f1 ∂f1 2 3
6 (x, y) (x, y) (x, y)7 y x+z y
f ′ (x, y) = 6 ∂x ∂y ∂z 7 = 41 1 5.
4 ∂f2 ∂f2 ∂f2 5 0
(x, y) (x, y) (x, y) x y
∂x ∂y ∂z
◭

The Jacobi Matrix
176 Example Let f (ρ, θ, z) = (ρ cos θ, ρ sin θ, z) be the function which changes
from cylindrical coordinates to Cartesian coordinates. We have
2 3
cos θ −ρ sin θ 0
6 7
f ′ (ρ, θ, z) = 4 sin θ ρ cos θ 05 .
0 0 1
177 Example Let f (ρ, φ, θ) = (ρ cos θ sin φ, ρ sin θ sin φ, ρ cos φ) be the function
which changes from spherical coordinates to Cartesian coordinates. We have
2 3
cos θ sin φ ρ cos θ cos φ −ρ sin φ sin θ
6 7
f ′ (ρ, φ, θ) = 4 sin θ sin φ ρ sin θ cos φ ρ cos θ sin φ 5 .
cos φ −ρ sin φ 0
The Jacobi matrix provides a convenient computational tool to compute the

derivative of a function at a point. Thus differentiability at a point implies that
the partial derivatives of the function exist at the point. The converse, however,
is not true.
178 Example Let f : R2 → R be given by

8
>
< y if x = 0,
f (x, y) = x if y = 0,
>
:
1 if xy 6= 0.
Observe that f is not continuous at (0, 0) (f (0, 0) = 0 but f (x, y) = 1 for values
arbitrarily close to (0, 0)), and hence, it is not differentiable there. We have
∂f ∂f
however, (0, 0) = (0, 0) = 1. Thus even if both partial derivatives exist at
∂x ∂y
(0, 0) is no guarantee that the function will be differentiable at (0, 0). You should
also notice that both partial derivatives are not continuous at (0, 0).
We have, however, the following.

2 3
f1
6 7
6 f2 7
n
179 Theorem Let A ⊆ R be an open set, and let f : R n
→ R . Put f = 6 7
m 6
7.
4. . .5
fm
If each of the partial derivatives Dj fi exists and is continuous on A, then f is
differentiable on A.

Chapter 2
The concept of repeated partial derivatives is akin to the concept of repeated

differentiation. Similarly with the concept of implicit partial differentiation. The
following examples should be self-explanatory.
∂2 π
180 Example Let f (u, v, w) = eu v cos w. Determine f (u, v, w) at (1, −1, ).
∂u∂v 4
∂2 ∂
(eu v cos w) = (eu cos w) = eu cos w,
∂u∂v ∂u
√
e 2
which is at the desired point. ◭
2
181 Example The equation z xy + (xy)z + xy 2 z 3 = 3 defines z as an implicit

∂z ∂z
function of x and y. Find and at (1, 1, 1).
∂x ∂y
∂ ∂ xy log z
z xy = e
∂x ∂x

xy ∂z
= y log z + z xy ,
z ∂x
∂ ∂
(xy)z ez log xy
=
∂x ∂x

∂z z
= log xy + (xy)z ,
∂x x
∂ ∂z
xy 2 z 3 = y 2 z 3 + 3xy 2 z 2 ,
∂x ∂x
Hence, at (1, 1, 1) we have
∂z ∂z ∂z 1
+1+1+3 = 0 =⇒ =− .
∂x ∂x ∂x 2
Similarly,
∂ xy ∂ xy log z
z = e
∂y ∂y

xy ∂z
= x log z + z xy ,
z ∂y
∂ ∂
(xy)z =ez log xy
∂y ∂y

∂z z
= log xy + (xy)z ,
∂y y
∂ ∂z
xy 2 z 3 = 2xyz 3 + 3xy 2 z 2 ,
∂y ∂y

The Jacobi Matrix
Hence, at (1, 1, 1) we have
∂z ∂z ∂z 3
+1+2+3 = 0 =⇒ =− .
∂y ∂y ∂y 4
◭
Just like in the one-variable case, we have the following rules of differentia-
tion. Let A ⊆ Rn , B ⊆ Rm be open sets f, g : A → Rm , α ∈ R, be differentiable
on A, h : B → Rl be differentiable on B, and f (A) ⊆ B. Then we have
• Addition Rule: Dx ((f + αg)) = Dx (f ) + αDx (g).

• Chain Rule: Dx ((h ◦ f )) = Df (x) (h) ◦ (Dx (f )).
Since composition of linear mappings expressed as matrices is matrix multipli-

cation, the Chain Rule takes the alternative form when applied to the Jacobi
matrix.
(h ◦ f )′ = (h′ ◦ f )(f ′ ). (2.1)
182 Example Let

2 3
uev
6 7
f (u, v) = 4u + v 5 ,
uv
" #
x2 + y
h(x, y) = .
y+z
Find (f ◦ h)′ (x, y).
2 3
ev uev
6 7
f ′ (u, v) = 4 1 1 5,
v u
and " #
′ 2x 1 0
h (x, y) = .
0 1 1
Observe also that
2 3
ey+z (x2 + y)ey+z
6 7
f ′ (h(x, y)) = 4 1 1 5.
y+z x2 + y

Chapter 2
Hence
(f ◦ h)′ (x, y) = f ′ (h(x, y))h′ (x, y)

2 3
6e
y+z
(x2 + y)ey+z 7 2 3
6 7 62x 1 07
= 6
6 1 1 74
7 5
4 5 0 1 1
y+z x2 + y
2 3
y+z 2 y+z 2 y+z
6 2xe (1 + x + y)e (x + y)e 7
6 7
= 6 2x 2 1 7.
6 7
4 5
2xy + 2xz x2 + 2y + z x2 + y
183 Example Let

f : R2 → R, f (u, v) = u2 + ev ,
u, v : R3 → R u(x, y) = xz, v(x, y) = y + z.

" #
u(x, y, z)
Put h(x, y) = f . Find the partial derivatives of h.
v(x, y, z)
" # " #
3 2 u(x, y) xz
Solution: ◮ Put g : R → R , g(x, y) = = . Observe
v(x, y y+z
that h = f ◦ g. Now,
" #
′ z 0 x
g (x, y) = ,
0 1 1

f ′ (u, v) = 2u ev ,

f ′ (h(x, y)) = 2xz ey+z .
Thus

∂h ∂h ∂h
(x, y) (x, y) (x, y) = h′ (x, y)
∂x ∂y ∂z
= (f ′ (g(x, y)))(g ′ (x, y))
2 3
z 0 x7 .
6
= 2xz ey+z 4 5
0 1 1

= 2xz 2 ey+z 2x2 z + ey+z

The Jacobi Matrix
Equating components, we obtain

∂h
(x, y) = 2xz 2 ,
∂x
∂h
(x, y) = ey+z ,
∂y
∂h
(x, y) = 2x2 z + ey+z .
∂z
◭
Under certain conditions we may differentiate under the integral sign.
184 Theorem (Differentiation under the integral sign) Let f : [a, b] × Y → R be a

function, with [a, b] being a closed interval, and Y being a closed and bounded
∂
subset of R. Suppose that both f (x, y) and f (x, y) are continuous in the vari-
Z ∂x
ables x and y jointly. Then f (x.y) dy exists as a continuously differentiable
Y
function of x on [a, b], with derivative
Z Z
d ∂
f (x, y) dy = f (x, y) dy.
dx Y Y ∂x
185 Example Prove that

Z π/2 x+1
F (x) = log(sin2 θ + x2 cos2 θ)dθ = π log .
0 2
Solution: ◮ Differentiating under the integral,

Z π/2 ∂
F ′ (x) = log(sin2 θ + x2 cos2 θ)dθ
0 ∂x
Z π/2
cos2 θ
= 2x dθ
0 sin2 θ + x2 cos2 θ
. The above implies that
Z
(x2 − 1) π/2 (x2 − 1) cos2 θ
· F ′ (x) = 2 dθ
2x Z0π/2 sin θ + x2 cos2 θ
2 2 2
x cos θ + sin θ − 1
= dθ
0 Z sin2 θ + x2 cos2 θ
π π/2 dθ
= − 2 2 2
2 Z0π/2 sin θ2 + x cos θ
π sec θdθ
= −
2 0 tan2 θ + x2
π 1 tan θ π/2
= − arctan
2 x x 0
π π
= − ,
2 2x

Chapter 2
which in turn implies that for x > 0, x 6= 1,

2x π π π
F ′ (x) = − = .
x2 − 1 2 2x x+1
Z π/2 π
For x = 1 one sees immediately that F ′ (1) = 2 cos2 θdθ = ,
0 2
agreeing with the formula. Now,
π
F ′ (x) = =⇒ F (x) = π log(x + 1) + C.
x+1
Z π/2
Since F (1) = log 1dθ = 0, we gather that C = −π log 2. Finally
0
thus
x+1
F (x) = π log(x + 1) − π log 2 = π log .
2
◭
Under certain conditions, the interval of integration in the above theorem need
not be compact.
Z Z
+∞ sin x π +∞ sin2 x
186 Example Given that dx = , compute dx.
0 x 2 0 x2
Z +∞ sin2 ax
Solution: ◮ Put I(a) = dx, with a ≥ 0. Differentiating
x2 0
both sides with respect to a, and making the substitution u = 2ax,
Z +∞ 2x sin ax cos ax
I ′ (a) = dx
Z0+∞ x2
sin 2ax
= dx
Z0+∞ x
sin u
= du
u
π0
= .
2
Integrating each side gives
π
I(a) = a + C.
2
π
Since I(0) = 0, we gather that C = 0. The desired integral is I(1) = .
2
◭
Homework

Gradients and Directional Derivatives
Problem 2.5.1 Let f : [0; +∞[×]0; +∞[→ Problem 2.5.5 Suppose g : R → R is con-
2
R, f (r, t) = tn e−r /4t , where n is a continuous and a ∈ R is a constant. Find the
stant. Determine n such that partial derivatives with respect to x and y
of

∂f 1 ∂ ∂f Z x2 y
= 2 r2 .
∂t r ∂r ∂r f : R2 → R, f (x, y) = g(t) dt.
a
Problem 2.5.2 Let

Z b
dx
2
f : R → R, 2
f (x, y) = min(x, y ). Problem 2.5.6 Given that 2 + a2
=
x
Z b 0
1 b dx
∂f (x, y) ∂f (x, y) arctan , evaluate .
Find and . a a 0 (x 2 + a 2 )2
∂x ∂y

Problem 2.5.3 Let f : R2 → R2 and g : Z +∞
R3 → R2 be given by arctan ax − arctan x π
dx = log π.
2 0 x 2
xy x − y + 2z
f (x, y) = 2
, g(x, y, z) = .
x y xy Problem 2.5.8 Assuming that the equation
xy 2 + 3z = cos z 2 defines z implicitly as a
Compute (f ◦ g) (1, 0, 1), if at all defined. If function of x and y, find ∂z .
′
undefined, explain. Compute (g ◦ f )′ (1, 0), ∂x

if at all defined. If undefined, explain.
Problem 2.5.9 If w = euv and u = r + s,
∂w
v = rs, determine .
xy ∂r
Problem 2.5.4 Let f (x, y) = and
x+y
2 3 Problem 2.5.10 Let z be an implicitly-
x−y
6 7 defined function of x and y through the
g(x, y) = 4 x2 y 2 5 Find (g ◦ f )′ (0, 1). equation (x + z)2 + (y + z)2 = 8. Find
x+y ∂z
at (1, 1, 1).
∂x
2.6 Gradients and Directional Derivatives

A function
Rn → Rm
f :
x 7→ f (x)
is called a vector field. If m = 1, it is called a scalar field.
187 Definition Let
Rn → R
f :
x 7→ f (x)

Chapter 2
be a scalar field. The gradient of f is the vector defined and denoted by

2 3
∂f
6 ∂x (x) 7
6 1 7
6 ∂f 7
6 (x) 7
6 ∂x 7
∇f (x) = 6 2 7.
6 .. 7
6 . 7
6 7
4 ∂f 5
(x)
∂xn
The gradient operator is the operator
2 3
∂
6 ∂x 7
6 17
6 ∂ 7
6 7
6 7
∇ = 6 ∂x2 7 .
6 .. 7
6 . 7
6 7
4 ∂ 5
∂xn
188 Theorem Let A ⊆ Rn be open and let f : A → R be a scalar field, and

assume that f is differentiable in A. Let K ∈ R be a constant. Then ∇f (x) is
orthogonal to the surface implicitly defined by f (x) = K.
Proof: Let
R → Rn
c:
t 7→ c(t)
be a curve lying on this surface. Choose t0 so that c(t0 ) = x. Then
(f ◦ c)(t0 ) = f (c(t)) = K,
and using the chain rule
f ′ (c(t0 ))c′ (t0 ) = 0,
which translates to
(∇f (x))•(c′ (t0 )) = 0.
Since c′ (t0 ) is tangent to the surface and its dot product with ∇f (x) is
0, we conclude that ∇f (x) is normal to the surface. ❑
☞ Let θ be the angle between ∇f (x) and c′ (t0 ). Since
|(∇f (x))•(c′ (t0 ))| = ||∇f (x)||||c′ (t0 )|| cos θ,
∇f (x) is the direction in which f is changing the fastest.
189 Example Find a unit vector normal to the surface x3 + y 3 + z = 4 at the

point (1, 1, 2).

Solution: ◮ Here f (x, y, z) = x3 + y 3 + z − 4 has gradient

2 3
3x2
6 7
∇f (x, y, z) = 43y 2 5
1
2 3
3
6 7
which at (1, 1, 2) is 435. Normalising this vector we obtain
1
2 3 3
√
6 19 7
6 3 7
6 7
6√ 7 .
6 19 7
4 1 5
√
19
190 Example Find the direction of the greatest rate of increase of f (x, y, z) =
xyez at the point (2, 1, 2).
Solution: ◮ The direction is that of the gradient vector. Here

2 3
yez
6 7
∇f (x, y, z) = 4 xez 5
xyez
2 3
e2
6 7
which at (2, 1, 2) becomes 42e2 5 . Normalising this vector we obtain
2e2
2 3
1
1 6 7
√ 42 5 .
5
2
f (x, y, z) = x + y 2 − z 2 .
Find the equation of the tangent plane to f at (1, 2, 3).

Chapter 2
Solution: ◮ A vector normal to the plane is ∇f (1, 2, 3). Now
2 3
1
6 7
∇f (x, y, z) = 4 2y 5
−2z
which is
2 3
1
6 7
4 4 5
−6
at (1, 2, 3). The equation of the tangent plane is thus
1(x − 1) + 4(y − 2) − 6(z − 3) = 0,
or
x + 4y − 6z = −9.
192 Definition Let

Rn → Rn
f :
x 7→ f (x)
be a vector field with

2 3
f1 (x)
6 7
6 f2 (x) 7
6 7
f (x) = 6 . 7 .
6 .. 7
4 5
fn (x)
The divergence of f is defined and denoted by
∂f1 ∂f2 ∂fn

divf (x) = ∇•f (x) = (x) + (x) + · · · + (x) .
∂x1 ∂x2 ∂xn
2
193 Example If f (x, y, z) = (x2 , y 2 , yez ) then
2
divf (x) = 2x + 2y + 2yzez .

194 Definition Let gk : Rn → Rn , 1 ≤ k ≤ n − 2 be vector fields with gi =

(gi1 , gi2 , . . . , gin ). Then the curl of (g1 , g2 , . . . , gn−2 )
2 3
e1 e2 ··· en
6 ∂ ∂ ∂ 7
6 ··· 7
6 7
6 ∂x1 ∂x2 ∂xn 7
6 7
6 g11 (x) g12 (x) ··· g1n (x) 7
curl(g1 , g2 , . . . , gn−2 )(x) = det 6 7.
6 g21 (x) g22 (x) ... g2n (x) 7
6 7
6 .. .. .. .. 7
6 7
4 . . . . 5
g(n−2)1 (x) g(n−2)2 (x) ... g(n−2)n (x)
2
195 Example If f (x, y, z) = (x2 , y 2 , yez ) then
2
curlf ((x, y, z)) = ∇ × f (x, y, z) = (ez )i.
196 Example If f (x, y, z, w) = (exyz , 0, 0, w2 ), g(x, y, z, w) = (0, 0, z, 0) then

2 3
e1 e2 e3 e4
6 ∂ ∂ ∂ ∂ 7
6 7
6 7
curl(f, g)(x, y, z, w) = det 6 ∂x1 ∂x2 ∂x3 ∂x4 7 = (xz 2 exyz )e4 .
6 xyz 2 7
4e 0 0 w 5
0 0 z 0
197 Definition Let A ⊆ Rn be open and let f : A → R be a scalar field, and

assume that f is differentiable in A. Let →
−v ∈ Rn \ {0} be such that x + t→ −v ∈A
for sufficiently small t ∈ R. Then the directional derivative of f in the direction of
→
−v at the point x is defined and denoted by
f (x + t→
−
v ) − f (x)
v f (x) = lim
D→
− .
t→0 t
☞ Some authors require that the vector →

−
v in definition 197 be a unit vector.
198 Theorem Let A ⊆ Rn be open and let f : A → R be a scalar field, and assume
→
−
that f is differentiable in A. Let →
−
v ∈ Rn \ { 0 } be such that → −
x + t→−v ∈ A for
sufficiently small t ∈ R. Then the directional derivative of f in the direction of →
−
v
→
−
at the point x is given by
∇f (x)•→−
v.
199 Example Find the directional derivative of f (x, y, z) = x3 + y 3 − z 2 in the

2 3
1
6 7
direction of 425.
3

Chapter 2
2 3
3x2
6 7
∇f (x, y, z) = 4 3y 2 5
−2z
and so
∇f (x, y, z)•→
−
v = 3x2 + 6y 2 − 6z.
Homework
Problem 2.6.1 Let f (x, y, z) = xey z . Find Problem 2.6.7 Use a linear approximation
of the function f (x, y) = ex cos 2y at (0, 0)
(∇f )(2, 1, 1). to estimate f (0.1, 0.2).
2 3
xz Problem 2.6.8 Prove that
6 xy 7
Problem 2.6.2 Let f (x, y, z) = 4e 5.
∇ • (u × v) = v • (∇ × u) − u • (∇ × v).
z
Find
(∇ × f )(2, 1, 1). Problem 2.6.9 Find the point on the sur-
face
Problem 2.6.3 Find the tangent plane to
2x2 + xy + y 2 + 4x + 8y − z + 14 = 0
x2
the surface − y 2 − z 2 = 0 at the point
2 for which the tangent plane is 4x + y − z =
(2, −1, 1).
0.
Problem 2.6.4 Find the point on the sur-

face Problem 2.6.10 Let φ : R3 → R be a scalar
field, and let U, V : R3 → R3 be vector
x2 + y 2 − 5xy + xz − yz = −3 fields. Prove that
for which the tangent plane is x − 7y = −6. 1. ∇ •φV = φ∇ •V + V•∇φ

2. ∇ × φV = φ∇ × V + (∇φ) × V
Problem 2.6.5 Find a vector pointing in →
−
3. ∇ × (∇φ) = 0
the direction in which f (x, y, z) = 3xy −
9xz 2 + y increases most rapidly at the point 4. ∇ •(∇ × V) = 0
(1, 1, 0). 5. ∇(U•V) = (U•∇)V + (V•∇)U + U ×
(∇ × V) + +V × (∇ × U)
Problem 2.6.6 Let D→ −u f (x, y) denote the
directional derivative of f at (x, y) in the di-
Problem 2.6.11 Find the angles made by
rection of the unit vector → −u . If ∇f (1, 2) = √
→
− →
− the gradient of f (x, y) = x 3 + y at the
2 i − j , find D( 3 , 4 ) f (1, 2).
5 5 point (1, 1) with the coordinate axes.

Levi-Civitta and Einstein
2.7 Levi-Civitta and Einstein

☞ In this section, unless otherwise noted, we are dealing in the space R3
and so, subscripts are in the set {1, 2, 3}.
200 Definition (Einstein’s Summation Convention) In any expression containing sub-

scripted variables appearing twice (and only twice) in any term, the subscripted
variables are assumed to be summed over.
☞ In order to emphasise that we are using Einstein’s convention, we will

enclose any terms under consideration with < · =.
201 Example Using Einstein’s Summation convention, the dot product of two
vectors →
−
x ∈ Rn and →
−
y ∈ Rn can be written as
X
n
→
− • →
−
x y = xi yi = <xt yt = .
i=1
→
− − → −
202 Example Given that ai , bj , ck , dl are the components of vectors in R3 , →
−
a , b ,→
c, d
respectively, what is the meaning of
<ai bi ck dk =?
X
3
→
− − X
→
3
→
− − •→ −
<ai bi ck dk = = ai bi <ck dk = = →
−
a • b <ck dk = = →
−
a•b ck dk = (→
−
a • b )(→
c d ).
i=1 k=1
203 Example Using Einstein’s Summation convention, the ij-th entry (AB)ij of
the product of two matrices A ∈ Mm×n (R) and B ∈ Mn×r (R) can be written as
X
n
(AB)ij = Aik Bkj = <Ait Btj = .
k=1
204 Example Using Einstein’s Summation convention, the trace tr (A) of a square
X
n
matrix A ∈ Mn×n (R) is tr (A) = Att = <Att =.
t=1
205 Example Demonstrate, via Einstein’s Summation convention, that if A, B

are two n × n matrices, then
tr (AB) = tr (BA) .

Chapter 2
tr (AB) = tr ((AB)ij ) = tr (<Aik Bkj =) = < < Atk Bkt = =,
and
tr (BA) = tr ((BA)ij ) = tr (<Bik Akj =) = < < Btk Akt = =,
from where the assertion follows, since the indices are dummy variables
and can be exchanged. ◭
206 Definition (Kroenecker’s Delta) The symbol δij is defined as follows:

(
0 if i 6= j
δij =
1 if i = j.
X
3
207 Example It is easy to see that <δik δkj = = δik δkj = δij .
k=1
208 Example We see that

X
3 X
3 X →
−
<δij ai bj = = δij ai bj = ak bk = →
−
a•b.
i=1 j=1 k=1
Recall that a permutation of distinct objects is a reordering of them. The 3! = 6

permutations of the index set {1, 2, 3} can be classified into even or odd. We start
with the identity permutation 123 and say it is even. Now, for any other permu-
tation, we will say that it is even if it takes an even number of transpositions
(switching only two elements in one move) to regain the identity permutation,
and odd if it takes an odd number of transpositions to regain the identity per-
mutation. Since
231 → 132 → 123, 312 → 132 → 123,
the permutations 123 (identity), 231, and 312 are even. Since
132 → 123, 321 → 123, 213 → 123,
the permutations 132, 321, and 213 are odd.
209 Definition (Levi-Civitta’s Alternating Tensor) The symbol εjkl is defined as fol-
lows: 8
>
> 0 if {j, k, l} =
6 {1, 2, 3}
> !
>
>
< −1 1 2 3
if is an odd permutation
εjkl = j k l
>
> !
>
> 1 2 3
>
: +1 if is an even permutation
j k l

Extrema
☞
Also,
In particular, if one subindex is repeated we have εrrs = εrsr = εsrr = 0.
ε123 = ε231 = ε312 = 1, ε132 = ε321 = ε213 = −1.
210 Example Using the Levi-Civitta alternating tensor and Einstein’s summation
→
− →
− →
−
convention, the cross product can also be expressed, if i = →−
e1 , j = →−
e2 , k =
→
−
e3 , then
→
−
x ×→ −
y = <εjkl (ak bl )→
−
ej = .
211 Example If A = [aij ] is a 3×3 matrix, then, using the Levi-Civitta alternating
tensor,
det A = <εijk a1i a2j a3k = .
212 Example Let →

−
x ,→
−
y ,→
−
z be vectors in R3 . Then
→
−
x • (→
−
y ×→
−
z ) = <xi (→
−
y ×→
−
z )i = = <xi εikl (yk zl ) = .
Homework
Problem 2.7.1 Let →
−
x ,→
−
y ,→
−
z be vectors in R3 . Demonstrate that
<xi yi zj = = (→
− y )→
x •→
− −
z.
2.8 Extrema
We now turn to the problem of finding maxima and minima for vector functions.
As in the one-variable case, the derivative will provide us with information about
the extrema, and the “second derivative” will provide us with information about
the nature of these extreme points.
To define an analogue for the second derivative, let us consider the following.
Let A ⊂ Rn and f : A → Rm be differentiable on A. We know that for fixed
x0 ∈ A, Dx0 (f ) is a linear transformation from Rn to Rm . This means that we
have a function
A → L (Rn , Rm )
T : ,
x 7→ Dx (f )
where L (Rn , Rm ) denotes the space of linear transformations from Rn to Rm .

Hence, if we differentiate T at x0 again, we obtain a linear transformation Dx0 (T ) =
Dx0 (Dx0 (f )) = Dx20 (f ) from Rn to L (Rn , Rm ). Hence, given x1 ∈ Rn , we have
Dx20 (f )(x1 ) ∈ L (Rn , Rm ). Again, this means that given x2 ∈ Rn , Dx20 (f )(x1 ))(x2 ) ∈
Rm . Thus the function
Rn × Rn → L (Rn , Rm )
Bx 0 :
(x1 , x2 ) 7→ Dx20 (f )(x1 , x2 )

Chapter 2
is well defined, and linear in each variable x1 and x2 , that is, it is a bilinear
function.
Just as the Jacobi matrix was a handy tool for finding a matrix representa-
tion of Dx (f ) in the natural bases, when f maps into R, we have the following
analogue representation of the second derivative.
213 Theorem Let A ⊆ Rn be an open set, and f : A → R be twice differentiable

on A. Then the matrix of Dx2 (f ) : Rn × Rn → R with respect to the standard
basis is given by the Hessian matrix:
2 3
∂2f ∂2f ∂2f
6 ∂x ∂x (x) (x) ··· (x) 7
6 1 1 ∂x1 ∂x2 ∂x1 ∂xn 7
6 ∂2f ∂2f ∂2f 7
6 (x) (x) ··· (x) 7
6 7
Hx f = 6 ∂x2 ∂x1 ∂x2 ∂x2 ∂x2 ∂xn 7
6 .. .. .. .. 7
6 . . . . 7
6 7
4 ∂2f ∂2f 2
∂ f 5
(x) (x) ··· (x)
∂xn ∂x1 ∂xn ∂x2 ∂xn ∂xn
f (x, y, z) = xy 2 z 3 .
Then
2 3
0 2yz 3 3y 2 z 2
6 7
H(x,y,z) f = 4 2yz 3 2xz 3 6xyz 2 5
3y 2 z 2 6xyz 2 6xy 2 z
From the preceding example, we notice that the Hessian is symmetric, as the
∂2 ∂2
mixed partial derivatives f = f , etc., are equal. This is no coinci-
∂x∂y ∂y∂x
dence, as guaranteed by the following theorem.
215 Theorem Let A ⊆ Rn be an open set, and f : A → R be twice differentiable

on A. If Dx20 (f ) is continuous, then Dx20 (f ) is symmetric, that is, ∀(x1 , x2 ) ∈
Rn × Rn we have
Dx20 (f )(x1 , x2 ) = Dx20 (f )(x2 , x1 ).
We are now ready to study extrema in several variables. The basic theorems
resemble those of one-variable calculus. First, we make some analogous defini-
tions.
216 Definition Let A ⊆ Rn be an open set, and f : A → R. If there is some

open ball Bx0 (r) on which ∀x ∈ Bx0 (r), f (x0 ) ≥ f (x), we say that f (x0 ) is
a local maximum of f . Similarly, if there is some open ball Bx1 (r) on which

Extrema
∀x ∈ Bx0 (r′ ), f (x1 ) ≤ f (x), we say that f (x1 ) is a local maximum of f . A point
is called an extreme point if it is either a local minimum or local maximum. A
point t is called a critical point if f is differentiable at t and Dt (f ) = 0. A critical
point which is neither a maxima nor a minima is called a saddle point.
217 Theorem Let A ⊆ Rn be an open set, and f : A → R be differentiable on A.

If x0 is an extreme point, then Dx0 (f ) = 0, that is, x0 is a critical point. Moreover,
if f is twice-differentiable with continuous second derivative and x0 is a critical
point such that Hx0 f is negative definite, then f has a local maximum at x0 . If
Hx0 f is positive definite, then f has a local minimum at x0 . If Hx0 f is indefinite,
then f has a saddle point. If Hx0 f is semi-definite (positive or negative), the test
is inconclusive.
218 Example Find the critical points of
R2 → R
f :
(x, y) 7→ x2 + xy + y 2 + 2x + 3y
and investigate their nature.
" #
2x + y + 2
(∇f )(x, y) = ,
x + 2y + 3
and so to find the critical points we solve
2x + y + 2 = 0,
x + 2y + 3 = 0,
1 4
which yields x = − , y = − . Now,
3 3
" #
2 1
H(x,y) f = ,
1 2
" #
2 1
which is positive definite, since ∆1 = 2 > 0 and ∆2 = det =
1 2

1 4
3 > 0. Thus x0 = − , − is a relative minimum and we have
3 3

7 1 4
− = f − ,− ≤ f (x, y) = x2 + xy + y 2 + 2x + 3y.
3 3 3
◭

Chapter 2
219 Example Find the extrema of
R3 → R
f : .
(x, y, z) 7→ x2 + y 2 + 3z 2 − xy + 2xz + yz
2 3
2x − y + 2z
6 7
(∇f )(x, y, z) = 4 2y − x + z 5 ,
6z + 2x + y
which vanishes when x = y = z = 0. Now,

2 3
2 −1 2
6 7
Hr f = 4−1 2 15 ,
2 1 6
" #
2 −1
which is positive definite, since ∆1 = 2 > 0, ∆2 = det =
−1 2
2 3
2 −1 2
6 7
3 > 0, and ∆3 = det 4−1 2 15 = 4 > 0. Thus f has a relative
2 1 6
minimum at (0, 0, 0) and
0 = f (0, 0, 0) ≤ f (x, y, z) = x2 + y 2 + 3z 2 − xy + 2xz + yz.
220 Example Let f (x, y) = x3 − y 3 + axy, with a ∈ R a parameter. Determine

the nature of the critical points of f .
" # " #
3x2 + ay 0
(∇f )(x, y) = 2
= =⇒ 3x2 = −ay, 3y 2 = ax.
−3y + ax 0
If a = 0, then x = y = 0 and so (0, 0) is a critical point. If a 6= 0 then

2
y2
3 3 = −ay =⇒ 27y 4 = −a3 y
a
=⇒ y(27y 3 + a3 ) = 0
=⇒ y(3y + a)(9y 2 − 3ay + a2 ) = 0
a
=⇒ y = 0 or y = − .
3

Extrema
a
If y = 0 then x = 0, so again (0, 0) is a critical point. If y = − then
3
3 a 2 a a a
x= · − = so ,− is a critical point.
a 3 3 3 3
Now,
" #
6x a
Hf (x,y) = =⇒ ∆1 = 6x, ∆2 = −36xy − a2 .
a −6y
2
a 0), a∆1 = 0, ∆2 = −a . If a 6= 0 thenthere
At (0,
a
is a saddle point.
a
2
At , − , ∆1 = 2a, ∆2 = 3a , whence ,− will be a local
3 3 3 3
minimum if a > 0 and a local maximum if a < 0. ◭
Homework
Problem 2.8.1 Determine the nature of the Problem 2.8.10 Find the extrema of
critical points of f (x, y) = y 2 −2x2 y+4x3 + f (x, y, z) = x2 y + y 2 z + 2x − z.
20x2 .
Problem 2.8.11 Determine the nature of

Problem 2.8.2 Determine the nature of the the critical points of
critical points of f (x, y) = (x − 2)2 + 2y 2 .
f (x, y, z) = 4xyz − x4 − y 4 − z 4 .
Problem 2.8.3 Determine the nature of the
critical points of f (x, y) = (x − 2)2 − 2y 2 .
the critical points of f (x, y, z) = xyz(4 −
Problem 2.8.4 Determine the nature of the x − y − z).
critical points of f (x, y) = x4 + 4xy − 2y 2 .

the critical points of
critical points of f (x, y) = x4 + y 4 − 2x2 +
4xy − 2y 2 . 2
−y 2 −z 2
g(x, y, z) = xyze−x .
critical points of f (x, y, z) = x2 + y 2 + z 2 − Z x 2 +y
xy + x − 2z. Problem 2.8.14 Let f (x, y) = g(t)dt,
y 2 −x
where g is a continuously differentiable
Problem 2.8.7 Determine the nature of the function defined over all real numbers and
critical points of f (x, y) = x4 + y 4 − 2(x − g(0) = 0, g ′ (0) 6= 0. Prove that (0, 0) is a
y)2 . saddle point for f .
Problem 2.8.8 Determine the nature of the Problem 2.8.15 Find the minimum of
critical points of
√ 2
f (x, y, z) = 4x2 z − 2xy − 4x2 − z 2 + y. 144 − 16x2 p
F (x, y) = (x−y)2 + − 4 − y2 ,
3
Problem 2.8.9 Find the extrema of
for −3 ≤ x ≤ 3, −2 ≤ y ≤ 2.
f (x, y, z) = x2 + y 2 + z 2 + xyz.
Chapter 2
2.9 Lagrange Multipliers

In some situations we wish to optimise a function given a set of constraints. For
such cases, we have the following.
221 Theorem Let A ⊆ Rn and let f : A → R, g : A → R be functions whose

respective derivatives are continuous. Let g(x0 ) = c0 and let S = g −1 (c0 ) be the
level set for g with value c0 , and assume ∇g(x0 ) 6= 0. If the restriction of f to S
has an extreme point at x0 , then ∃λ ∈ R such that
∇f (x0 ) = λ∇g(x0 ).
☞ The above theorem only locates extrema, it does not say anything concern-
ing the nature of the critical points found.
222 Example Optimise f : R2 → R, f (x, y) = x2 − y 2 given that x2 + y 2 = 1.
Solution: ◮ Let g(x, y) = x2 + y 2 − 1. We solve

" # " #
x x
∇f = λ∇g
y y
for x, y, λ. This requires

" # " #
2x 2xλ
= .
−2y 2yλ
From 2x = 2xλ we get either x = 0 or λ = 1. If x = 0 then y = ±1 and

λ = −1. If λ = 1, then y = 0, x = ±1. Thus the potential critical points
are (±1, 0) and (0, ±1). If x2 + y 2 = 1 then
f (x, y) = x2 − (1 − x2 ) = 2x2 − 1 ≥ −1,
and
f (x, y) = 1 − y 2 − y 2 = 1 − 2y 2 ≤ 1.
Thus (±1, 0) are maximum points and (0, ±1) are minimum points. ◭
223 Example Find the maximum and the minimum points of f (x, y) = 4x + 3y,
subject to the constraint x2 + 4y 2 = 4, using Lagrange multipliers.
Solution: ◮ Putting g(x, y) = x2 + 4y 2 − 4 we have

" # " #
4 2x
∇f (x, y) = λ∇g(x, y) =⇒ =λ .
3 8y

Lagrange Multipliers
Thus 4 = 2λx, 3 = 8λy. Clearly then λ 6= 0. Upon division we find

x 16
= . Hence
y 3
256 3 16
x2 + 4y 2 = 4 =⇒ y 2 + 4y 2 = 4 =⇒ y = ± √ , x = ± √
9 73 73.
The maximum is clearly then
√
16 3
4 √ +3 √ = 73,
73 73
√
and the minimum is − 73. ◭
224 Example Let a > 0, b > 0, c > 0. Determine the maximum and minimum
x y z x2 y2 z2
values of f (x, y, z) = + + on the ellipsoid 2 + 2 + 2 = 1.
a b c a b c
x2 y2
Solution: ◮ We use Lagrange multipliers. Put g(x, y, z) = + +
a2 b2
2
z
− 1. Then
c2
2 3 2 3
1/a 2x/a2
6 7 6 7
∇f (x, y, z) = λ∇g(x, y, z) ⇐⇒ 4 1/b 5 = λ 4 2y/b2 5 .
1/c 2z/c2
a b c x2 y2
It follows that λ 6= 0. Hence x = ,y = ,z = . Since 2 + 2 +
2λ √ 2λ 2λ a b
z2 3 3
= 1, we deduce = 1 or λ = ± . Since a, b, c are positive, f
c2 4λ2 2
will have a maximum when all x, y, z are positive and a minimum when
all x, y, z are negative. Thus the maximum is when
a b c
x = √ ,y = √ ,z = √ ,
3 3 3
and
3 √
f (x, y, z) ≤ √ = 3
3
and the minimum is when
a b c
x = −√ , y = −√ , z = −√ ,
3 3 3
and
3 √
f (x, y, z) ≥ − √ = − 3.
3

Chapter 2
Aliter: Using the CBS Inequality,

2 1/2
x y z x y2 z2 √ √ x y z
·1+ ≤ 2 2 2 1/2
a · 1 + · 1 + + 1 + 1 + 1 = (1) 3 =⇒ − 3≤ + + ≤
b c a2 b2 c2 a b c
◭
225 Example Let a > 0, b > 0, c > 0. Determine the maximum volume of the
parallelepiped with sides parallel to the axes that can be enclosed inside the
x2 y2 z2
ellipsoid 2 + 2 + 2 = 1.
a b c
Solution: ◮ Let 2x, 2y, 2z, be the dimensions of the box. We must
x2
maximise f (x, y, z) = 8xyz subject to the constraint g(x, y, z) = 2 +
a
y2 z2
+ 2 − 1. Using Lagrange multipliers,
b2 c
2 3 2 3
8yz 2x/a2
6 7 6 7 x y z
∇f (x, y, z) = λ∇g(x, y, z) ⇐⇒ 48xz 5 = λ 4 2y/b2 5 =⇒ 4yz = λ , 4xz = λ , 4xy = λ .
2
a2 b2 c2
8xy 2z/c
Multiplying the first inequality by x, the second by y, the third by z, and
adding,

x2 y2 z2 x2 y2 z2
4xyz = λ , 4xyz = λ , 4xyz = λ , =⇒ 12xyz = λ + + = λ.
a2 b2 c2 a2 b2 c2
Hence
λ x2 y2 z2
=λ . =λ =λ
3 a2 b2 c2
6 0, then
If λ = 0, then 8xyz = 0, which minimises the volume. If λ =
a b c
x= √ , y= √ , z= √ ,
3 3 3
and the maximum value is
abc
8xyz ≤ 8 √ .
3 3
Aliter: Using the AM-GM Inequality,

x2 y2 z2
2 2 2 1/3 + +
x y z 2 b2 c2 = 1 =⇒ 8xyz ≤ √
8
(x2 y 2 z 2 )1/3 = (abc)2/3 · · ≤ (abc)2/3 · a (abc).
a2 b2 a2 3 3 3 3
◭
Homework

Lagrange Multipliers
Problem 2.9.1 A closed box (with six outer Problem 2.9.8 Find the axes of the ellipse
faces), has fixed surface area of S square
units. Find its maximum volume using La- 5x2 + 8xy + 5y 2 = 9.
grange multipliers. That is, subject to the
constraint 2ab + 2bc + 2ca = S, you must Problem 2.9.9 Optimise f (x, y, z) = x +
maximise abc. y + z subject to x2 + y 2 = 2, and x + z = 1.
Problem 2.9.2 Consider the problem of Problem 2.9.10 Let x, y be strictly positive
finding the closest point P ′ on the plane real numbers with x + y = 1. What is the
Π : ax + by + cz = d, a, b, c non-zero √
maximum value of x + xy?
constants with a + b + c 6= d to the point
P (1, 1, 1). In this problem, you will do this
in three essentially different ways. Problem 2.9.11 Let a, b be positive
real constants. Maximise f (x, y) =
1. Do this by a geometric argument, ar-
xa e−x y b e−y on the triangle in R2 bounded
guing the the point P ′ closest to P
by the lines x ≥ 0, y ≥ 0, x + y ≤ 1.
on Π is on the perpendicular passing
through P and P ′ .
2. Do this by means of Lagrange multi- Problem 2.9.12 Determine the extrema of
pliers, by minimising a suitable func- f (x, y) = cos2 x+cos2 y subject to the con-
π
tion f (x, y, z) subject to the constraint x − y = .
4
straint g(x, y, z) = ax + by + cz − d.
3. Do this considering the uncon-
Problem 2.9.13 Determine the extrema of
strained
extrema of a suitable
func-
d − ax − by f (x, y, z) = x − 2y + 2z subject to the con-
tion h x, y, . straint x2 + y 2 + z 2 = 1.
c
Problem 2.9.3 Given that x, y are positive Problem 2.9.14 Find the points on the
real numbers such that x4 +81y 4 = 36 find curve determined by the equations
the maximum of x + 3y.
x2 + xy + y 2 − z 2 = 1, x2 + y 2 = 1
Problem 2.9.4 If x, y, z are positive real which are closest to the origin.
1
numbers such that x2 y 3 z = 2 , what is
6
the minimum value of f (x, y, z) = 2x + Problem 2.9.15 Does there exist a polyno-
3y + z? mial in two variables with real coefficients
p(x, y) such that p(x, y) > 0 for all x and
Problem 2.9.5 Find the maximum and the y and that for all real numbers c > 0 there
minimum values of f (x, y) = x2 + y 2 sub- exists (x0 , y0 ) ∈ R2 such that p(x0 , y0 ) =
ject to the constraint 5x2 + 6xy + 5y 2 = 8. c?
Problem 2.9.6 Let a > 0, b > 0, p > 1. Problem 2.9.16 Maximise

Maximise f (x, y) = ax + by subject to the
f (x, y, z) = log x + log y + 3 log z
constraint xp + y p = 1.
on the portion of sphere x2 + y 2 + z 2 = 5r 2
Problem 2.9.7 Find the extrema of which lies on the first octant. Demonstrate
using this that for any positive real num-
f (x, y, z) = x2 + y 2 + z 2 bers a, b and c, there follows the inequality
subject to the constraint 5
a+b+c
2 2 2 abc3 ≤ 27 .
(x − 1) + (y − 2) + (z − 3) = 4. 5

3 Integration
3.1 Differential Forms

We will now consider integration in several variables. In order to smooth our
discussion, we need to consider the concept of differential forms.
226 Definition Consider n variables
x1 , x2 , . . . , x n
in n-dimensional space (used as the names of the axes), and let

2 3
a1j
6 7
6 a2j 7
6 7
aj = 6 . 7 ∈ Rn , 1 ≤ j ≤ k,
6 .. 7
4 5
anj
be k ≤ n vectors in Rn . Moreover, let {j1 , j2 , . . . , jk } ⊆ {1, 2, . . . , n} be a col-

lection of k sub-indices. An elementary k-differential form (k > 1) acting on the
vectors aj , 1 ≤ j ≤ k is defined and denoted by
2 3
aj1 1 aj1 2 ··· aj1 k
6 7
6 aj 1 aj2 2 ··· aj2 k 7
6 2 7
dxj1 ∧ dxj2 ∧ · · · ∧ dxjk (a1 , a2 , . . . , ak ) = det 6 . .. .. 7 .
6 .. . ··· . 7
4 5
ajk 1 ajk 2 ··· ajk k
In other words, dxj1 ∧ dxj2 ∧ · · · ∧ dxjk (a1 , a2 , . . . , ak ) is the xj1 xj2 . . . xjk compo-
nent of the signed k-volume of a k-parallelotope in Rn spanned by a1 , a2 , . . . , ak .
☞ By virtue of being a determinant, the wedge product ∧ of differential forms

has the following properties
➊ anti-commutativity: da ∧ db = −db ∧ da.

➋ linearity: d(a + b) = da + db.
➌ scalar homogeneity: if λ ∈ R, then dλa = λda.
➍ associativity: (da ∧ db) ∧ dc = da ∧ (db ∧ dc).1
1
Notice that associativity does not hold for the wedge product of vectors.
133
Differential Forms
☞ Anti-commutativity yields
da ∧ da = 0.
227 Example Consider

2 3
1
6 7
a = 4 0 5 ∈ R3 .
−1
Then
dx(a) = det(1) = 1,
dy(a) = det(0) = 0,
dz(a) = det(−1) = −1,
are the (signed) 1-volumes (that is, the length) of the projections of a onto the
coordinate axes.
228 Example In R3 we have dx ∧ dy ∧ dx = 0, since we have a repeated variable.
229 Example In R3 we have
dx ∧ dz + 5dz ∧ dx + 4dx ∧ dy − dy ∧ dx + 12dx ∧ dx = −4dx ∧ dz + 5dx ∧ dy.
☞ In order to avoid redundancy we will make the convention that if a sum of

two or more terms have the same differential form up to permutation of the
variables, we will simplify the summands and express the other differential
forms in terms of the one differential form whose indices appear in increasing
order.
230 Definition A 0-differential form in Rn is simply a differentiable function in Rn .
231 Definition A k-differential form field in Rn is an expression of the form

X
ω= aj1 j2 ...jk dxj1 ∧ dxj2 ∧ · · · dxjk ,
1≤j1 ≤j2 ≤···≤jk ≤n
where the aj1 j2 ...jk are differentiable functions in Rn .
232 Example
g(x, y, z, w) = x + y 2 + z 3 + w4
is a 0-form in R4 .
233 Example An example of a 1-form field in R3 is
ω = xdx + y 2 dy + xyz 3 dz.

Chapter 3

ω = x2 dx ∧ dy + y 2 dy ∧ dz + dz ∧ dx.

ω = (x + y + z)dx ∧ dy ∧ dz.
We shew now how to multiply differential forms.
236 Example The product of the 1-form fields in R3

ω1 = ydx + xdy,
ω2 = −2xdx + 2ydy,
is
ω1 ∧ ω2 = (2x2 + 2y 2 )dx ∧ dy.
237 Definition Let f (x1 , x2 , . . . , xn ) be a 0-form in Rn . The exterior derivative df

of f is
X
n
∂f
df = dxi .
i=1
∂xi
Furthermore, if
ω = f (x1 , x2 , . . . , xn )dxj1 ∧ dxj2 ∧ · · · ∧ dxjk
is a k-form in Rn , the exterior derivative dω of ω is the (k + 1)-form
dω = df (x1 , x2 , . . . , xn ) ∧ dxj1 ∧ dxj2 ∧ · · · ∧ dxjk .
238 Example If in R2 , ω = x3 y 4 , then

d(x3 y 4 ) = 3x2 y 4 dx + 4x3 y 3 dy.
239 Example If in R2 , ω = x2 ydx + x3 y 4 dy then

dω = d(x2 ydx + x3 y 4 dy)
= (2xydx + x2 dy) ∧ dx + (3x2 y 4 dx + 4x3 y 3 dy) ∧ dy
= x2 dy ∧ dx + 3x2 y 4 dx ∧ dy
= (3x2 y 4 − x2 )dx ∧ dy
240 Example Consider the change of variables x = u + v, y = uv. Then

dx = du + dv,
dy = vdu + udv,
whence
dx ∧ dy = (u − v)du ∧ dv.

Zero-Manifolds
241 Example Consider the transformation of coordinates xyz into uvw coordi-
nates given by
z y+z
u = x + y + z, v = , w= .
y+z x+y+z
Then
du = dx + dy + dz,
z y
dv = − dy + dz,
(y + z)2 (y + z)2
y+z x x
dw = − dx + dy + dz.
(x + y + z)2 (x + y + z)2 (x + y + z)2
Multiplication gives

zx y(y + z)
du ∧ dv ∧ dw = − −
(y + z)2 (x + y + z)2 (y + z)2 (x + y + z)2
z(y + z) xy
+ − dx ∧ dy ∧ dz
(y + z)2 (x + y + z)2 (y + z)2 (x + y + z)2
2 2
z − y − zx − xy
= dx ∧ dy ∧ dz.
(y + z)2 (x + y + z)2
3.2 Zero-Manifolds
242 Definition A 0-dimensional oriented manifold of Rn is simply a point x ∈ Rn ,
with a choice of the + or − sign. A general oriented 0-manifold is a union of
oriented points.
243 Definition Let M = +{b} ∪ −{a} be an oriented 0-manifold, and let ω be a

0-form. Then Z
ω = ω(b) − ω(a).
M
☞ −x has opposite orientation to +x and

Z Z
ω=− ω.
−x +x
244 Example Let M = −{(1, 0, 0)} ∪ +{(1, 2, 3)} ∪ −{(0, −2, 0)}2 be an oriented
0-manifold, and let ω = x + 2y + z 2 . Then
Z
ω = −ω((1, 0, 0)) + ω(1, 2, 3) − ω(0, 0, 3) = −(1) + (14) − (−4) = 17.
M
2
Do not confuse, say, −{(1, 0, 0)} with −(1, 0, 0) = (−1, 0, 0). The first one means that the
point (1, 0, 0) is given negative orientation, the second means that (−1, 0, 0) is the additive inverse
of (1, 0, 0).

Chapter 3
3.3 One-Manifolds
245 Definition A 1-dimensional oriented manifold of Rn is simply an oriented smooth
curve Γ ∈ Rn , with a choice of a + orientation if the curve traverses in the di-
rection of increasing t, or with a choice of a − sign if the curve traverses in the
direction of decreasing t. A general oriented 1-manifold is a union of oriented
curves.
☞ The curve −Γ has opposite orientation to Γ and

Z Z
ω=− ω.
−Γ Γ

→
− dx
If f : R2 → R2 and if d→
−
r = , the classical way of writing this is
dy
Z
→
−
f • d→
−
r.
Γ
We now turn to the problem of integrating 1-forms.
246 Example Calculate Z

xydx + (x + y)dy
Γ
where Γ is the parabola y = x2 , x ∈ [−1; 2] oriented in the positive direction.
Solution: ◮ We parametrise the curve as x = t, y = t2 . Then
xydx + (x + y)dy = t3 dt + (t + t2 )dt2 = (3t3 + 2t2 )dt,
whence Z Z 2
ω = (3t3 + 2t2 )dt
Γ −1
2
2 3
= t3 + t4
3 4 −1
69
= .
4
What would happen if we had given the curve above a different parametri-
sation? First observe that the curve travels from (−1, 1) to (2, 4) on the
parabola
√ y = x2 .√These conditions are met with the parametrisation
x = t − 1, y = ( t − 1)2 , t ∈ [0; 9]. Then
√ √ √ √ √
xydx + (x + y)dy = ( t − 1)3 d( t − 1) + (( t − 1) + ( t − 1)2 )d( t − 1)2
√ √ √
= (3( t − 1)3 + 2( t − 1)2 )d( t − 1)
1 √ √
= √ (3( t − 1)3 + 2( t − 1)2 )dt,
2 t

One-Manifolds
whence
Z Z √
1 9 √
ω = √ (3( t − 1)3 + 2( t − 1)2 )dt
Γ
0 22 t 3/2 9
3t 7t 5t √
= − + − t
4 3 2 0
69
= ,
4
as before.
To solve this problem using Maple you may use the code below.
> LineInt( VectorField( <x*y,x+y> ), Path( <t,tˆ2>, t=-1..2));
◭
☞ It turns out that if two different parametrisations of the same curve have
the same orientation, then their integrals are equal. Hence, we only need to
worry about finding a suitable parametrisation.
247 Example Calculate the line integral

Z
y sin xdx + x cos ydy,
Γ
where Γ is the line segment from (0, 0) to (1, 1) in the positive direction.
Solution: ◮ This line has equation y = x, so we choose the parametri-

sation x = y = t. The integral is thus
Z Z 1
y sin xdx + x cos ydy = (t sin t + t cos t)dt
Γ 0 Z 1
= [t(sin x − cos t)]10 − (sin t − cos t)dt
0
= 2 sin 1 − 1,
upon integrating by parts.

> LineInt( VectorField( <y*sin(x),x*cos(y)> ), Line(<0,0>,<1,1>));
◭
248 Example Calculate the path integral

Z
x+y x−y
dy + dx
Γ x2 + y 2 x2 + y 2
around the closed square Γ = ABCD with A = (1, 1), B = (−1, 1), C =
(−1, −1), and D = (1, −1) in the direction ABCDA.

Chapter 3
Solution: ◮ On AB, y = 1, dy = 0, on BC, x = −1, dx = 0, on CD,

y = −1, dy = 0, and on DA, x = 1, dx = 0. The integral is thus
Z Z Z Z Z
ω = ω+ ω+ ω+ ω
Γ
ZAB
−1
BC
ZCD
−1
DA
Z 1 Z 1
x−1 y−1 x+1 y+1
= dx + dy + dx + dy
1 x2 +1 1 y2 +1 −1 x2 +1 −1 y2 + 1
Z 1 1
= 4 dx
−1 x2 + 1
= 4 arctan x|1−1
= 2π.
> LineInt( VectorField( <(x+y)/(xˆ2+yˆ2),(x-y)/(xˆ2+yˆ2)> ),
> LineSegments(<1,1>,<-1,1>,<-1,-1>,<1,-1>,<1,1>));
◭
☞ When the integral is along a Iclosed path, like

Z in the preceding example,
it is customary to use the symbol rather than . The positive direction of
Γ Γ
integration is that sense that when traversing the path, the area enclosed by the
curve is to the left of the curve.

I
x2 dy + y 2 dx,
Γ
2 2
where Γ is the ellipse 9x + 4y = 36 traversed once in the positive sense.
Solution: ◮ Parametrise the ellipse as x = 2 cos t, y = 3 sin t, t ∈

[0; 2π]. Observe that when traversing this closed curve, the area of the
ellipse is on the left hand side of the path, so this parametrisation tra-
verses the curve in the positive sense. We have
I Z 2π
ω = ((4 cos2 t)(3 cos t) + (9 sin t)(−2 sin t))dt
Γ Z02π
= (12 cos3 t − 18 sin3 t)dt
0
= 0.
> LineInt( VectorField( <yˆ2,xˆ2> ),Ellipse(9*xˆ2 + 4*yˆ2 -36));
◭

One-Manifolds
250 Definition Let Γ be a smooth curve. The integral

Z
f (x)||dx||
Γ
is called the path integral of f along Γ.

Z
251 Example Find x||dx|| where Γ is the triangle starting at A : (−1, −1) to
Γ
B : (2, −2), and ending in C : (1, 2).
Solution: ◮ The lines passing through the given points have equations
−x − 4
LAB : y = , and LBC : y = −4x + 6. On LAB
3
Ê √
È
1 2 x 10dx
x||dx|| = x (dx)2 + (dy)2 = x 1 + − dx = ,
3 3
and on LBC
È È √
2
x||dx|| = x (dx)2 + (dy)2 = x( 1 + (−4) )dx = x 17dx.
Hence Z Z Z
x||dx|| = x||dx|| + x||dx||
Γ LAB √ LBC
Z 2 Z 1 √
x 10dx
= + x 17dx
√
−1 3√ 2
10 3 17
= − .
2 2
> PathInt( x, [x,y]=LineSegments( <-1,-1>, <2,-2>,<1,2> ) );
◭
Homework

3
2 b
Chapter 3
1
-3 -2 -1 1 2 3
b -1
-2 b
-3
Z
Problem 3.3.1 Consider xdx + ydy and ing at O(0, 0) going on a straight line to
Z C A 4 cos π6 , 4 sin π6 and continuing on an
xy||dx||. arc of a circle to B 4 cos π5 , 4 sin π5 .
B
C
Z b
1. Evaluate xdx + ydy where C is

C b
A
the straight line path that starts at
(−1, 0) goes to (0, 1) and ends at b
(1, 0), by parametrising
Z this path.
O
Calculate also xy||dx|| using this
C
parametrisation.
Z Figure 3.2: Problems 3.3.2 and 3.3.3.
2. Evaluate xdx + ydy where C is
C
the semicircle that starts at (−1, 0) Z
goes to (0, 1) and ends at (1, 0), by Problem 3.3.3 Find x||dx|| where Γ is
parametrising
Z this path. Calculate Γ
the path shewn in figure 3.2.
also xy||dx|| using this parametri-
C I
sation.
Problem 3.3.4 Find zdx + xdy + ydz
Z Γ
where Γ is the intersection of the sphere
Problem 3.3.2 Find xdx + ydy where
Γ
x2 + y 2 + z 2 = 1 and the plane x + y = 1,
Γ is the path shewn in figure 3.2, start- traversed in the positive direction.
3.4 Closed and Exact Forms

252 Lemma (Poincaré Lemma) If ω is a p-differential form of continuously differ-
entiable functions in Rn then
d(dω) = 0.
Proof: We will prove this by induction on p. For p = 0 if

ω = f (x1 , x2 , . . . , xn )
then
X
n
∂f
dω = dxk
k=1
∂xk

Closed and Exact Forms
and
X
n
∂f
d(dω) = d ∧ dxk
k=1
∂xk

Xn X
n
∂2f
= ∧ dxj ∧ dxk
k=1 j=1
∂xj ∂xk

X
n
∂2f ∂2f
= − dxj ∧ dxk
1≤j≤k≤n
∂xj ∂xk ∂xk ∂xj
= 0,
since ω is continuously differentiable and so the mixed partial deriva-

tives are equal. Consider now an arbitrary p-form, p > 0. Since such a
form can be written as
X
ω= aj1 j2 ...jp dxj1 ∧ dxj2 ∧ · · · dxjp ,
1≤j1 ≤j2 ≤···≤jp ≤n
where the aj1 j2 ...jp are continuous differentiable functions in Rn , we

have
X
dω = daj1 j2 ...jp ∧ dxj1 ∧ dxj2 ∧ · · · dxjp
1≤j1 ≤j2 ≤···≤jp ≤n !
X X
n
∂aj1 j2 ...jp
= dxi ∧ dxj1 ∧ dxj2 ∧ · · · dxjp ,
1≤j1 ≤j2 ≤···≤jp ≤n i=1
∂xi
it is enough to prove that for each summand

d da ∧ dxj1 ∧ dxj2 ∧ · · · dxjp = 0.
But

d da ∧ dxj1 ∧ dxj2 ∧ · · · dxjp = dda ∧ dxj1 ∧ dxj2 ∧ · · · dxjp

+da ∧ d dxj1 ∧ dxj2 ∧ · · · dxjp

= da ∧ d dxj1 ∧ dxj2 ∧ · · · dxjp ,
since dda = 0 from the case p = 0. But an independent induction

argument proves that

d dxj1 ∧ dxj2 ∧ · · · dxjp = 0,
253 Definition A differential form ω is said to be exact if there is a continuously

differentiable function F such that
dF = ω.

Chapter 3
254 Example The differential form
xdx + ydy
is exact, since
1
xdx + ydy = d (x2 + y 2 ) .
2
ydx + xdy
is exact, since
ydx + xdy = d (xy) .

x y
dx + dy
x2 + y 2 x2 + y 2
is exact, since

x y 1
dx + dy = d loge (x2 + y 2 ) .
x2 + y 2 x2 + y 2 2
☞ Let ω = dF be an exact form. By the Poincaré Lemma Theorem 252,

dω = ddF = 0. A result of Poincaré says that for certain domains (called star-
shaped domains) the converse is also true, that is, if dω = 0 on a star-shaped
domain then ω is exact.
257 Example Determine whether the differential form

2x(1 − ey ) ey
ω= dx + dy
(1 + x2 )2 1 + x2
is exact.
Solution: ◮ Assume there is a function F such that
dF = ω.
By the Chain Rule

∂F ∂F
dF = dx + dy.
∂x ∂y
This demands that
∂F 2x(1 − ey )
= ,
∂x (1 + x2 )2
∂F ey
= .
∂y 1 + x2

Closed and Exact Forms
We have a choice here of integrating either the first, or the second ex-
pression. Since integrating the second expression (with respect to y) is
easier, we find
ey
F (x, y) = + φ(x),
1 + x2
where φ(x) is a function depending only on x. To find it, we differentiate
the obtained expression for F with respect to x and find
∂F 2xey
=− + φ′ (x).
∂x (1 + x2 )2
∂F
Comparing this with our first expression for , we find
∂x
2x
φ′ (x) = ,
(1 + x2 )2
that is
1
φ(x) = − + c,
1 + x2
where c is a constant. We then take
ey − 1
F (x, y) = + c.
1 + x2
◭
258 Example Is there a continuously differentiable function such that
dF = ω = y 2 z 3 dx + 2xyz 3 dy + 3xy 2 z 2 dz ?
dω = (2yz 3 dy + 3y 2 z 2 dz) ∧ dx
+(2yz 3 dx + 2xz 3 dy + 6xyz 2 dz) ∧ dy
+(3y 2 z 2 dx + 6xyz 2 dy + 6xy 2 zdz) ∧ dz
= 0,
so this form is exact in a star-shaped domain. So put
∂F ∂F ∂F
dF = dx + dy + dz = y 2 z 3 dx + 2xyz 3 dy + 3xy 2 z 2 dz.
∂x ∂y ∂z
Then
∂F
= y 2 z 3 =⇒ F = xy 2 z 3 + a(y, z),
∂x
∂F
= 2xyz 3 =⇒ F = xy 2 z 3 + b(x, z),
∂y

Chapter 3
∂F
= 3xy 2 z 2 =⇒ F = xy 2 z 3 + c(x, y),
∂z
Comparing these three expressions for F , we obtain F (x, y, z) = xy 2 z 3 .
◭
We have the following equivalent of the Fundamental Theorem of Calculus.
259 Theorem Let U ⊆ Rn be an open set. Assume ω = dF is an exact form, and

Γ a path in U with starting point A and endpoint B. Then
Z Z B
ω= dF = F (B) − F (A).
Γ A
In particular, if Γ is a simple closed path, then

I
ω = 0.
Γ
260 Example Evaluate the integral

I
2x 2y
dx + 2 dy
x2 + y 2 x + y2
Γ
where Γ is the closed polygon with vertices at A = (0, 0), B = (5, 0), C = (7, 2),
D = (3, 2), E = (1, 1), traversed in the order ABCDEA.
Solution: ◮ Observe that

2x 2y 4xy 4xy
d dx + dy =− dy∧dx− dx∧dy = 0,
x2 + y 2 x2 + y 2 (x2 + y 2 )2 (x2 + y 2 )2
and so the form is exact in a start-shaped domain. By virtue of Theorem

259, the integral is 0. ◭

I
(x2 − y)dx + (y 2 − x)dy,
Γ
where Γ is a loop of x3 + y 3 − 2xy = 0 traversed once in the positive sense.
Solution: ◮ Since
∂ ∂
(x2 − y) = −1 = (y 2 − x),
∂y ∂x
the form is exact, and since this is a closed simple path, the integral is
0. ◭

Two-Manifolds
3.5 Two-Manifolds
262 Definition A 2-dimensional oriented manifold of R2 is simply an open set (re-
gion) D ∈ R2 , where the + orientation is counter-clockwise and the − orientation
is clockwise. A general oriented 2-manifold is a union of open sets.
☞ The region −D has opposite orientation to D and

Z Z
ω=− ω.
−D D
We will often write

Z
f (x, y)dA
D
where dA denotes the area element.
☞ In this section, unless otherwise noticed, we will choose the positive ori-
entation for the regions considered. This corresponds to using the area form
dxdy.
Let D ⊆ R2 . Given a function f : D → R, the integral

Z
f dA
D
is the sum of all the values of f restricted to D. In particular,

Z
dA
D
is the area of D.
In order to evaluate double integrals, we need the following.
263 Theorem (Fubini’s Theorem) Let D = [a; b] × [c; d], and let f : A → R be
continuous. Then
Z Z b Z d Z d Z b
f dA = f (x, y)dy dx = f (x, y)dx dy
a c c a
D
Fubini’s Theorem allows us to convert the double integral into iterated (single)
integrals.

Chapter 3
264 Example Z
Z Z 1 3
xydA = xydy dx
3 !
[0;1]×[2;3] 0 2
Z
1 xy 2
= dx
0 2 2
Z 1
9x
= − 2x dx
2
1 0
5x2
=
4 0
5
= .
4
Notice that if we had integrated first with respect to x we would have obtained
the same result:
Z Z Z 1 !
3 1 3 x2 y
xydx dy = dy
2 0 2 2 0
Z 3 y
= dx
2 2 3
2
y
=
4 2
5
= .
4
Also, this integral is “factorable into x and y pieces” meaning that
Z Z 1 Z 3
xydA = xdx ydy
[0;1]×[2;3] 0 2
1 5
=
2 2
5
=
4
> int(x*y, [x,y]=Region(0..1,2..3));
265 Example We have

Z 4 Z 1 Z 4 Z 1
(x + 2y)(2x + y) dxdy = (2x2 + 5xy + 2y 2 ) dxdy
3 0 Z34 0
2 5
= + y + 2y 2 dy
3 3 2
409
= .
12
> int((x + 2*y)*(2*x + y), [x,y]=Region(3..4,0..1));

Two-Manifolds
In the cases when the domain of integration is not a rectangle, we decompose

so that, one variable is kept constant.
Z
266 Example Find xy dxdy in the triangle with vertices A : (−1, −1), B :
D
(2, −2), C : (1, 2).
Solution: ◮ The lines passing through the given points have equations
−x − 4 3x + 1
LAB : y = , LBC : y = −4x + 6, LCA : y = . Now, we
3 2
draw the region carefully. If we integrate first with respect to y, we
must divide the region as in figure 3.3, because there are two upper
lines which the upper value of y might be. The lower point of the dashed
line is (1, −5/3). The integral is thus
Z Z Z Z
1 (3x+1)/2 2 −4x+6 11
x y dy dx + x y dy dx = − .
−1 (−x−4)/3 1 (−x−4)/3 8
If we integrate first with respect to x, we must divide the region as in

figure 3.4, because there are two left-most lines which the left value of
x might be. The right point of the dashed line is (7/4, −1). The integral
is thus
Z Z Z Z
−1 (6−y)/4 2 (6−y)/4 11
y x dx dy + y x dx dy = − .
−2 −4−3y −1 (2y−1)/3 8
> int(x*y, [x,y]=Triangle(<-1,-1>,<2,-2>,<1,2>);
◭
267 Example Consider the region inside the parallelogram P with vertices at A :
(6, 3), B : (8, 4), C : (9, 6), D : (7, 5), as in figure 3.5. Find
Z
xy dxdy.
P
Solution: ◮ The lines joining the points have equations

x
LAB : y = ,
2
LBC : y = 2x − 12,

7
3 3
b
6
2 b 2 b 5 Chapter 3b b
b b
4
1 1
b
3
-3 -2 -1 1 2 3 -3 -2 -1 1 2 3 1
b -1 b -1 b
b
b b 1 2 3 4 5 6 7 8 9 10
-2 -2
-3 -3

Integration order dydx. Integration order dxdy.
x 3
LCD : y = + ,
2 2
LDA : y = 2x − 9.
The integral is thus
Z 4 Z 2y Z 5 Z (y+12)/2 Z 6 Z (y+12)/2 409
xy dxdy+ xy dxdy+ xy dxdy = .
3 (y+9)/2 4 (y+9)/2 5 2y−3 4
To solve this problem using Maple you may use the code below. Notice
that we have split the parallelogram into two triangles.
> int(x*y, [x,y]=Triangle(<6,3>,<8,4>,<7,5>))
> + int(x*y, [x,y]=Triangle(<8,4>,<9,6>,<7,5>));
◭
268 Example Find Z

y
dxdy
x2 + 1
D
where
D = {(x, y) ∈ R2 |x ≥ 0, x2 + y 2 ≤ 1}.
Solution: ◮ The integral is 0. Observe that if (x, y) ∈ D then (x, −y) ∈

D. Also, f (x, −y) = −f (x, y). ◭

5
1
4
3
2 Two-Manifolds
2
1
0 0
0 1 2 3 4 5 0 1
1

0
0 1 2
269 Example Find Z

Z 4
√
y
ey/x dx dy.
0 y/2
y √
0 ≤ y ≤ 4, ≤x≤ y =⇒ 0 ≤ x ≤ 2, x2 ≤ y ≤ 2x.
2
We then have
Z Z √ Z Z
4 y 2 2x
y/x
e dx dy = ey/x dy dx
0 y/2 x2
Z02

= xey/x 2x
x2 dx
Z02
= (xe2 − xex ) dx
0
= 2e2 − (2e2 − e2 + 1)
= e2 − 1
270 Example Find the area of the region

√ √ √ p
R = {(x, y) ∈ R2 : x + y ≥ 1, 1 − x + 1 − y ≥ 1}.
Solution: ◮ The area is given by

Z Z Z √
1 1−(1− 1−x)2
dA = √ 2
dy dx
D 0 (1− x)
Z 1 √ √
= 2 ( 1 − x + x − 1)dx
0
2
= .
3
◭

Chapter 3
Z
√ √
271 Example Evaluate Tx2 + y 2 UdA, where R is the rectangle [0; 2] × [0; 2]
. R
Solution: ◮ The function (x, y) 7→ Tx2 + y 2 U jumps √every time

√ x2 + y 2
is an integer. For (x, y) ∈ R, we have 0 ≤ x2 +y 2 ≤ ( 2)2 +( 2)2 = 4.
Thus we decompose R as the union of the
Rk = {(x, y) ∈ R2 : x ≥ 0, y ≥ 0, k ≤ x2 +y 2 < k+1}, k ∈ {1, 2, 3}.

Z X Z
Tx2 + y 2 UdA = Tx2 + y 2 UdA
R Rk
1≤k≤3 ZZ ZZ ZZ
= 1dA + 2dA + 3dA.
1≤x2 +y2 <2,x≥0,y≥0 2≤x2 +y2 <3,x≥0,y≥0 3≤x2 +y2 <4,x≥0,y≥0
Now the integrals can be computed by realising that they are areas of
quarter annuli, and so,
ZZ
1 πk
kdA = k · · π(k + 1 − k) = .
4 4
k≤x2 +y2 <k+1,x≥0,y≥0
Hence Z
π 3π
Tx2 + y 2 UdA = (1 + 2 + 3) = .
R 4 2
◭
Homework
Problem
Z 3 Z3.5.1 Evaluate the iterated inte- Problem 3.5.4 Find
x
1 Z
gral dydx.
1 0 x xydxdy
D
Problem 3.5.2 Let S be the interior and where

boundary of the triangleZwith vertices (0, 0),
D = {(x, y) ∈ R2 |y ≥ x2 , x ≥ y 2 }.
(2, 1), and (2, 0). Find ydA.
S
Problem 3.5.5 Find
Z
Problem 3.5.3 Let (x + y)(sin x)(sin y)dA
D
S = {(x, y) ∈ R2 : x ≥ 0, y ≥ 0, 1 ≤ x2 +y 2 ≤ 4}.
where D = [0; π]2 .
Z
Find x2 dA. Z 1 Z 1
Problem 3.5.6 Find min(x2 , y 2 )dxdy.
S
0 0

Two-Manifolds
Z
Problem 3.5.7 Find xydxdy where Problem 3.5.12 Find
D Z
D = {(x, y) ∈ R2 : x > 0, y > 0, 9 < x2 +y 2 < 16, 1 < x2 −y 2
loge<
(1 16}.
+ x + y)dA
Z D
Problem 3.5.8 Evaluate xdA where R

R
where
is the (unoriented) circular segment in fig-
ure 3.9, which is created by the intersection D = {(x, y) ∈ R2 |x ≥ 0, y ≥ 0, x + y ≤ 1}.
of regions
{(x, y) ∈ R2 : x2 + y 2 ≤ 16} Z
Problem 3.5.13 Evaluate Tx +
and [0;2]2
§ ª √
2 3 y 2 UdA.
(x, y) ∈ R : y ≥ − x+4 .
3
Z
B Problem 3.5.14 Evaluate Tx + yUdA,
b R
where R is the rectangle [0 ; 1] × [0 ; 2].
Z
b
A Problem 3.5.15 Evaluate xdA where R

R
is the quarter annulus in figure 3.11, which
formed by the the area between the circles
x2 + y 2 = 1 and x2 + y 2 = 4 in the first
quadrant.
Z 1 Z 1
2
Problem 3.5.9 Find 2ex dxdy
0 y
Z
Problem 3.5.10 Evaluate min(x, y 2 )dA.
[0;1]2
Z
Problem 3.5.11 Find xydA, where R
R
is the (unoriented) △OAB in figure 3.10 Figure 3.11: Problem 3.5.15.
with O(0, 0), A(3, 1), and B(4, 4).
Z
Problem 3.5.16 Evaluate xdA where R
B R
b
is the E-shaped figure in figure 3.12.
b
A
b
O b b
b b
b b
Figure 3.10: Problem 3.5.11. b b
b b
Free to photocopy and distribute b b 152

Chapter 3
Figure 3.12: Problem 3.5.16. Problem 3.5.22 Find

Z
Z π /2 Z π /2 loge (1 + x2 + y)dA
cos y
Problem 3.5.17 Evaluate dydx. D
0 x y
where
Problem 3.5.18 Find
Z 2 Z x Z 4 Z 2 D= {(x, y) ∈ R2 : x ≥ 0, y ≥ 0, x2 +y ≤ 1}.
πx πx
sin dy dx+ sin dy dx.
1
√
x 2y 2
√
x 2y Z
Problem 3.5.23 Evaluate xdA, where
R
Problem 3.5.19 Find R is the region between the circles x2 +y 2 =
Z 4 and x2 +y 2 = 2y, as shewn in figure 3.14.
2x(x2 + y 2 )dA
D
where
D = {(x, y) ∈ R2 : x4 + y 4 + x2 − y 2 ≤ 1}.
Problem 3.5.20 Find the area bounded by

y2 x2
the ellipses x2 + = 1 and + y 2 = 1,
4 4
as in figure 3.13.
Z 1 Z 1
ex/y
Problem 3.5.24 Evaluate dydx.
0
√
x y
Problem 3.5.25 Find

Z
|x − y|dA
D
where
Problem 3.5.21 Find
Z D = {(x, y) ∈ R2 : |x| ≤ 1, |y| ≤ 1}.
xydA
Z
D
Problem 3.5.26 Find (2x + 3y + 1) dA,
where D
where D is the triangle with vertices at
D = {(x, y) ∈ R2 : x ≥ 0, y ≥ 0, xy+y+x ≤ A(−1,
1}. −1), B(2, −4), and C(1, 3).

Two-Manifolds
Problem 3.5.27 Let f : [0; 1] →]0; +∞] be Problem 3.5.35 Evaluate

a decreasing function. Prove that Z 1Z 1 Z 1
Z 1 Z 1 ··· (x1 + x2 + · · · + xn ) dx1 dx2 . . . dxn .
xf 2 (x)dx f 2 (x)dx 0 0 0
0 0
Z 1 ≤ Z 1 .
xf (x)dx f (x)dx Problem 3.5.36 Let I be the rectangle
0 0 [1; 2] × [1; 2] and let f, g be continuous
functions f, g : [1; 2] → [1; 2] such that
Problem 3.5.28 Find f (x) ≤ g(x). Demonstrate that
Z Z
(xy(x + y))dA (g(y) − f (x)) dxdy ≥ 0.
D I
where Z 1 Z 1
2
D = {(x, y) ∈ R |x ≥ 0, y ≥ 0, x + y ≤ 1}. Problem 3.5.37 Find xy dxdy.
Z 0
1
0
x−1
Then demonstrate that dx =
Problem 3.5.29 Let f, g : [0; 1] → [0; 1] be 0 log x
continuous, with f increasing. Prove that log 2.
Z 1 Z 1 Z 1
(f ◦g)(x)dx ≤ f (x)dx+ g(x)dx. Problem 3.5.38 Evaluate
0 0 0
Z 4 Z √ 4−y p
Z
12x − x3 dxdy.
Problem 3.5.30 Compute (xy + y 2 )dA 0 0
S
where Z 2 Z 2 p
2 1/2 1/2 Problem 3.5.39 Evaluate y 1 + x3 dxdy.
S = {(x, y) ∈ R : |x| + |y| ≤ 1}. 0 y
Problem 3.5.31 Evaluate Z 1 Z 1

xy
Z aZ b Problem 3.5.40 Evaluate √ dxdy.
2 2 2 2 1 + x4
emax(b x ,a y ) dydx, 0 y
0 0
where a and b are positive. Problem 3.5.41 Find

Z
Z 1
dA
√ (x + y)4
Problem 3.5.32 Find xy dA, where
D
D
2 2
D = {(x, y) ∈ R : y ≥ 0, (x + y) ≤ 2x}. where
D = {(x, y) ∈ R2 |x ≥ 1, y ≥ 1, x + y ≤ 4}.
Problem 3.5.33 A rectangle R on the plane
is the disjoint union R = ∪N
k=1 R k of rectan-
gles Rk . It is known that at least one side Problem 3.5.42 Prove that
of each of the rectangles Rk is an integer. Z +∞ Z +∞
xe−y sin y 1
Shew that at least one side of R is an inte- dydx = .
ger. 0 2x y2 16
Problem 3.5.34 Evaluate Problem 3.5.43 Prove that

Z 1Z 1 Z 1 Z 1Z y
y √
··· (x1 x2 · · · xn )dx1 dx2 . . . dxn . p dxdy = log(1 + 2).
0 0 0 0 y2 x x2 + y 2

Chapter 3
Problem 3.5.44 Prove that equals

Z 1Z 1 Z 1Z 1
x−y 1 x −yZ Z b Z b 2
3
dydx = =− 3
dxdy.
b
(x + y) 2 (x + y)
0 0 0 0 (f (x))2 dx (g(x))2 dx − (f (x)g(x))dx .
Is this a contradiction to Fubini’s Theorem? a a a
This is an integral analogue of Lagrange’s

Problem 3.5.45 Find Identity. Deduce Cauchy’s Inequality for in-
Z
xdA tegrals,
D Z b
2 Z b
Z b

2 2
where (f (x)g(x))dx ≤ (f (x)) dx (g(x)) dx .
a a a
2
D = {(x, y) ∈ R |y ≥ 0, x−y+1 ≥ 0, x+2y−4 ≤ 0}.
Problem 3.5.48 Let a ∈ R, n ∈ N, a > 0,

Problem 3.5.46 Evaluate n > 0. Let f : [0; a] → R be continuous.
Z 1Z 1 Z 1 π
2 Prove that
lim ··· cos (x1 + x2 + · · · + xn ) dx1 dx2 . . . dxn .
n→+∞ 0 0 0 2n Z aZ x Z x Z x 1 n−2 n−1
··· (f (x1 )f (x2 ) · · · f (xn ))dxn dxn−1 . . . dx2 dx
Problem 3.5.47 Let f, g be continuous 0 0 0 0
functions in the interval [a; b]. Prove that

2 ! equals
Z b Z b Z a n
1 f (x) g(x) 1
det dx dy f (x)dx .
2 a a f (y) g(y) n! 0
3.6 Change of Variables

We now perform a multidimensional analogue of the change of variables theorem
in one variable.
272 Theorem Let (D, ∆) ∈ (Rn )2 be open, bounded sets in Rn with volume and
let g : ∆ → D be a continuously differentiable bijective mapping such that
1
det g ′ (u) 6= 0, and both | det g ′ (u)|, are bounded on ∆. For f : D → R
| det g ′ (u)|
bounded and integrable, f ◦ g| det g ′ (u)| is integrable on ∆ and
Z Z Z Z
··· f = ··· (f ◦ g)| det g ′ (u)|,
D ∆
that is
Z Z
··· f (x1 , x2 , . . . , xn )dx1 ∧ dx2 ∧ . . . ∧ dxn
D
Z Z
= ··· f (g(u1 , u2 , . . . , un ))| det g ′ (u)|du1 ∧ du2 ∧ . . . ∧ dun .
∆

Change of Variables
One normally chooses changes of variables that map into rectangular regions, or
that simplify the integrand. Let us start with a rather trivial example.
7 7
b
6 6
b
5 5
b b b
4 4
b b b
3 3
2 2
1 1
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
Figure 3.15: Example 273. xy-plane. Figure 3.16: Example 273. uv-plane.
273 Example Evaluate the integral

Z 4 Z 1
(x + 2y)(2x + y)dxdy.
3 0
Solution: ◮ Observe that we have already computed this integral in

example 265. Put
u = x + 2y =⇒ du = dx + 2dy,
v = 2x + y =⇒ dv = 2dx + dy,
giving
du ∧ dv = −3dx ∧ dy.
Now, " #" #
1 2 x
(u, v) =
2 1 y
is a linear transformation, and hence it maps quadrilaterals into quadri-
laterals. The corners of the rectangle in the area of integration in the xy-
plane are (0, 3), (1, 3), (1, 4), and (0, 4), (traversed counter-clockwise)
and they map into (6, 3), (7, 5), (9, 6), and (8, 4), respectively, in the
uv-plane (see figure 3.16). The form dx ∧ dy has opposite orientation to
du ∧ dv so we use
dv ∧ du = 3dx ∧ dy

Chapter 3
instead. The integral sought is

Z
1 409
uv dvdu = ,
3 12
P
from example 267. ◭
274 Example The integral

Z Z 1
4 4 1 4
(x − y )dA = −y dy = 0.
[0;1]2 0 5
Evaluate it using the change of variables u = x2 − y 2 , v = 2xy.
Solution: ◮ First we find
du = 2xdx − 2ydy,
dv = 2ydx + 2xdy,
and so
du ∧ dv = (4x2 + 4y 2 )dx ∧ dy.
We now determine the region ∆ into which the square D = [0; 1]2 is
mapped. We use the fact that boundaries will be mapped into bound-
aries. Put
AB = {(x, 0) : 0 ≤ x ≤ 1},
BC = {(1, y) : 0 ≤ y ≤ 1},
CD = {(1 − x, 1) : 0 ≤ x ≤ 1},
DA = {(0, 1 − y) : 0 ≤ y ≤ 1}.
On AB we have u = x, v = 0. Since 0 ≤ x ≤ 1, AB is thus mapped

into the line segment 0 ≤ u ≤ 1, v = 0.
v2
On BC we have u = 1 − y 2 , v = 2y. Thus u = 1 − . Hence BC is
4
2
v
mapped to the portion of the parabola u = 1 − , 0 ≤ v ≤ 2.
4
On CD we have u = (1 − x)2 − 1, v = 2(1 − x). This means that
v2
u= − 1, 0 ≤ v ≤ 2.
4
Finally, on DA, we have u = −(1 − y)2 , v = 0. Since 0 ≤ y ≤ 1, DA is
mapped into the line segment −1 ≤ u ≤ 0, v = 0. The region ∆ is thus
v2
the area in the uv plane enclosed by the parabolas u ≤ − 1, u ≤
4
2
v
1− with −1 ≤ u ≤ 1, 0 ≤ v ≤ 2.
4

Change of Variables
We deduce that
Z Z
4 4 1
(x − y )dA = (x4 − y 4 ) dudv
[0;1]2 ∆Z 4(x2 + y2 )
1
= (x2 − y 2 )dudv
4 Z∆
1
= ududv
4 Z ∆ Z
1 2 1−v 2 /4
= udu dv
4 0 v 2 /4−1
= 0,
as before. ◭
275 Example Find Z

3
+y3 )/xy
e(x dA
D
where
D = {(x, y) ∈ R2 |y 2 − 2px ≤ 0, x2 − 2py ≤ 0, p ∈]0; +∞[ fixed},
using the change of variables x = u2 v, y = uv 2 .
dx = 2uvdu + u2 dv,
dy = v 2 du + 2uvdv,
dx ∧ dy = 3u2 v 2 du ∧ dv.
The region transforms into
∆ = {(u, v) ∈ R2 |0 ≤ u ≤ (2p)1/3 , 0 ≤ v ≤ (2p)1/3 }.
The integral becomes

Z Z
u6 v 3 + u3 v 6
f (x, y)dxdy = exp (3u2 v 2 ) dudv
u3 v 3
D ∆Z
3 3
= 3 eu ev u2 v 2 dudv
∆
Z !2
1 (2p)1/3
3
= 3u2 eu du
3 0
1 2p
= (e − 1)2 .
3
As an exercise, you may try the (more natural) substitution x3 = u2 v, y 3 =
v 2 u and verify that the same result is obtained. ◭

Chapter 3
π
b
2
1 b b
0 b b b b
π
0 1
2
Figure 3.17: Example 276. xy-plane. Figure 3.18: Example 276. uv-plane.
276 Example In this problem we will follow an argument of Calabi, Beukers, and
X 1
+∞
π2
Kock to prove that = .
n=1
n2 6
X
+∞
1 3 X
+∞
1
1. Prove that if S = 2
, then S = .
n=1
n 4 n=1
(2n − 1)2
X
+∞ Z 1 Z 1
1 dxdy
2. Prove that = .
n=1
(2n − 1)2 0 0 1 − x2 y 2
sin u sin v
3. Use the change of variables x = , y = in order to evaluate
Z Z cos v cos u
1 1 dxdy
.
0 0 1 − x2 y 2
Solution: ◮
1. Observe that the sum of the even terms is
X
+∞
1 1 X 1
+∞
1
= = S,
n=1
(2n)2 4 n=1
n2 4
a quarter of the sum, hence the sum of the odd terms must be three
3
quarters of the sum, S.
4
2. Observe that
Z 1 2 Z 1 Z 1 Z 1 Z 1
1 2n−2 1 2n−2 2n−2
= x dx =⇒ = x dx y dy = (xy)2n−2 dx
2n − 1 0 2n − 1 0 0 0 0

Change of Variables
Thus
X
+∞
1 X Z 1Z 1
+∞ Z 1 Z 1 +∞
X Z 1Z 1
dxdy
2n−2 2n−2
= (xy) dxdy = (xy) dxdy = ,
n=1
(2n − 1)2 n=1 0 0 0 0 n=1 0 0 1 − x2 y 2
as claimed.3
sin u sin v
3. If x = ,y= , then
cos v cos u
dx = (cos u)(sec v)du+(sin u)(sec v)(tan v)dv, dy = (sec u)(tan u)(sin v)du+(sec u)(cos v)d
from where

dx∧dy = du∧dv−(tan2 u)(tan2 v)du∧dv = 1 − (tan2 u)(tan2 v) du∧dv.
Also,
sin2 v sin2 v
1 − x2 y 2 = 1 − · = 1 − (tan2 u)(tan2 v).
cos2 v cos2 u
This gives
dxdy
= dudv.
1 − x2 y 2
We now have to determine the region that the transformation x =
sin u sin v
,y= forms in the uv-plane. Observe that
cos v cos u
Ê s
1 − y2 1 − x2
u = arctan x 2
, v = arctan y .
1−x 1 − y2
This means that the square in the xy-plane in figure 3.17 is trans-
formed into the triangle in the uv-plane in figure 3.18.
We deduce,
Z Z Z Z Z
1 1 dxdy π/2 π/2−v π/2 π v2 π/2 π2 π2 π
= dudv = (π/2 − v) dv = v− = − =
0 0 1 − x2 y 2 0 0 0 2 2 0 4 8
Finally,
3 π2 π2
S= =⇒ S = .
4 8 6
◭
Homework
Problem 3.6.1 Let D ′ = {(u, v) ∈ R2 : u ≤ 1, −u ≤ v ≤ u}. Consider
R2 → R2
Φ:
u+v u−v .
(u, v) 7→ ,
2 2
3
This exchange of integral and sum needs justification. We will accept it for our purposes.

Chapter 3
➊ Find the image of Φ on D ′ , that is, find D = Φ(D ′ ).

➋ Find Z
2
−y 2
(x + y)2 ex dA.
D
Problem Z3.6.2 Using the change of variables x = u2 − v 2 , y = 2uv, u ≥ 0, v ≥ 0,

p
evaluate x2 + y 2 dA, where
R
È
R = {(x, y) ∈ R2 : −1 ≤ x ≤ 1, 0 ≤ y ≤ 2 1 − |x|}
Problem 3.6.3 Using the change of variables u = x − y and v = x + y, evaluate

Z
x−y
dA, where R is the square with vertices at (0, 2), (1, 1), (2, 2), (1, 3).
R x + y
Z
Problem 3.6.4 Find f (x, y)dA where
D
D = {(x, y) ∈ R2 |a ≤ xy ≤ b, y ≥ x ≥ 0, y 2 − x2 ≤ 1, (a, b) ∈ R2 , 0 < a < b}
and f (x, y) = y 4 − x4 by using the change of variables u = xy, v = y 2 − x2 .
Problem 3.6.5 Use the following steps (due to Tom Apostol) in order to prove that
X
∞
1 π2
2
= .
n 6
n=1
➊ Use the series expansion

1
= 1 + t + t2 + t3 + · · · |t| < 1,
1−t
in order to prove (formally) that
Z 1 Z 1 X
∞
dxdy 1
= .
0 0 1 − xy n2
n=1
➋ Use the change of variables u = x + y, v = x − y to shew that

Z 1Z 1 Z 1 Z u Z 2 Z 2−u
dxdy dv dv
=2 2 2
du + 2 2 2
du.
0 0 1 − xy 0 −u 4 − u + v 1 u−2 4 − u + v
➌ Shew that the above integral reduces to

Z 1 Z 2
2 u 2 2−u
2 √ arctan √ du + 2 √ arctan √ du.
4−u 2 4 − u2 4−u 2 4 − u2
0 1
π2 u
➍ Finally, prove that the above integral is by using the substitution θ = arcsin .
6 2

Change to Polar Coordinates
3.7 Change to Polar Coordinates

One of the most common changes of variable is the passage to polar coordinates
where
x = ρ cos θ =⇒ dx = cos θdρ − ρ sin θdθ,
y = ρ sin θ =⇒ dy = sin θdρ + ρ cos θdθ,
whence
dx ∧ dy = (ρ cos2 θ + ρ sin2 θ)dρ ∧ dθ = ρdρ ∧ dθ.
277 Example Find

Z È
xy x2 + y 2 dA
D
where
D = {(x, y) ∈ R2 |x ≥ 0, y ≥ 0, y ≤ x, x2 + y 2 ≤ 1}.
Solution: ◮ We use polar coordinates. The region D transforms into

the region
h πi
∆ = [0; 1] × 0; .
4
Therefore the integral becomes
Z Z Z
π/4 1
4
ρ cos θ sin θ dρdθ = cos θ sin θ dθ ρ4 dρ
0 0
∆
1
= .
20
◭
Z
278 Example Evaluate xdA, where R is the region bounded by the circles
R
x2 + y 2 = 4 and x2 + y 2 = 2y.
Solution: ◮ Observe that this is problem 3.5.23. Since x2 + y 2 = r 2 ,

the radius sweeps from r 2 = 2r sin θ to r 2 = 4, that is, from 2 sin θ to 2.

Chapter 3
b b
Figure 3.19: Example 277. Figure 3.20: Example 278. Figure 3.21: Example 279.
π
The angle clearly sweeps from 0 to . Thus the integral becomes
2
Z Z π/2 Z 2 sin θ
xdA = r 2 cos θdrdθ
R 0Z 2
1 π/2
= (8 cos θ − 8 cos θ sin3 θ)dθ
3 0
= 2.
◭
Z
2
−xy−y2
279 Example Find e−x dA, where
D
D = {(x, y) ∈ R2 : x2 + xy + y 2 ≤ 1}.
Solution: ◮ Completing squares
√ 2
2 2 y 2 3y
x + xy + y = x + + .
2 2
√
y 3y
Put U = x + ,V = . The integral becomes
2 2
Z Z
2
−xy−y2 2 2
+V 2 )
e−x dxdy = √ e−(U dU dV.
{x2 +xy+y2 ≤1} 3 {U 2 +V 2 ≤1}
Passing to polar coordinates, the above equals

Z 2π Z 1
2 2 2π
√ ρe−ρ dρdθ = √ (1 − e−1 ).
3 0 0 3
◭

Z ©
1
280 Example Evaluate dA over the region (x, y) ∈ R2 : x2 + y 2 ≤ 4, y ≥ 1
R (x2 + y 2 )3/2
(figure 3.22).
1
Solution: ◮ The radius sweeps from r = to r = 2. The desired
sin θ
integral is
Z Z 5π/6 Z 2
1 1
dA = drdθ
R (x2 + y 2 )3/2 r2
Zπ/6
5π/6
csc θ

1
= sin θ − dθ
π/6 2
√ π
= 3− .
3
◭
Z
281 Example Evaluate (x3 + y 3 )dA where R is the region bounded by the
R
x2 y2
ellipse + = 1 and the first quadrant, a > 0 and b > 0.
a2 b2
Solution: ◮ Put x = ar cos θ, y = br sin θ. Then
x = ar cos θ =⇒ dx = a cos θdr − ar sin θdθ,
y = br sin θ =⇒ dy = b sin θdr + br cos θdθ,

whence
dx ∧ dy = (abr cos2 θ + abr sin2 θ)dr ∧ dθ = abrdr ∧ dθ.
Observe that on the ellipse
x2 y2 a2 r 2 cos2 θ b2 r 2 sin2 θ
+ = 1 =⇒ + = 1 =⇒ r = 1.
a2 b2 a2 b2
Thus the required integral is
Z Z π/2 Z 1
(x3 + y 3 )dA = abr 4 (cos3 θ + sin3 θ)drdθ
R 0 Z 0
1 Z π/2

= ab r 4 dr (a3 cos3 θ + b3 sin3 θ)dθ
0 0

1 2a3 + 2b3
= ab
5 3
2ab(a3 + b3 )
= .
15

Chapter 3
Homework
Z
Problem 3.7.1 Evaluate xydA where R is the region
R

R = (x, y) ∈ R2 : x2 + y 2 ≤ 16, x ≥ 1, y ≥ 1 ,
as in the figure 3.23. Set up the integral in both Cartesian and polar coordinates.
Problem 3.7.2 Find Z

(x2 − y 2 )dA
D
where
D = {(x, y) ∈ R2 |(x − 1)2 + y 2 ≤ 1}.

√
xydA
D
where
D = {(x, y) ∈ R2 |(x2 + y 2 )2 ≤ 2xy}.
Z
Problem 3.7.4 Find f dA where
D
D = {(x, y) ∈ R2 : b2 x2 + a2 y 2 = a2 b2 , (a, b) ∈]0; +∞[ fixed}

and f (x, y) = x3 + y 3 .
Problem 3.7.5 Let a > 0 and b > 0. Prove that

Z r 2 2
a b − a 2 y 2 − b2 x 2 πab(π − 2)
dA = ,
R a 2 b2 + a 2 y 2 + b2 x 2 8
x2 y2
where R is the region bounded by the ellipse 2
+ 2 = 1 and the first quadrant.
a b


Z
y √
p dxdy = 2 − 1,
R x2 +y 2
where
R = {(x, y) ∈ R2 : 0 < x < 1, o < y < x2 }.
Problem 3.7.7 Prove that the ellipse
(x − 2y + 3)2 + (3x + 4y − 1)2 = 4

2π
bounds an area of .
5

p
x2 + y 2 dA
D
where
D = {(x, y) ∈ R2 |x ≥ 0, y ≥ 0, x2 + y 2 ≤ 1, x2 + y 2 − 2y ≥ 0}.
Z
D
D = {(x, y) ∈ R2 |y ≥ 0, x2 + y 2 − 2x ≤ 0}
and f (x, y) = x2 y.
Z
Problem 3.7.10 Let D = {(x, y) ∈ R2 : x ≥ 1, x2 + y 2 ≤ 4}. Find xdA.
D
Z
D
D = {(x, y) ∈ R2 |x ≥ 1, x2 + y 2 − 2x ≤ 0}
1
and f (x, y) = .
(x2 + y 2 )2
Problem 3.7.12 Let
D = {(x, y) ∈ R2 : x2 + y 2 − y ≤ 0, x2 + y 2 − x ≤ 0}.
Find the integral Z

(x + y)2 dA.
D
Problem 3.7.13 Let D = {(x, y) ∈ R2 |y ≤ x2 + y 2 ≤ 1}. Compute

Z
dA
2 + y 2 )2
.
D (1 + x

Chapter 3
Problem 3.7.14 Evaluate

Z
p
x3 y 3 1 − x4 − y 4 dA
{(x,y )∈R2 :x≥0,y ≥0,x 4 +y 4 ≤1}
using x2 = ρ cos θ, y 2 = ρ sin θ.
Problem 3.7.15 William Thompson (Lord Kelvin) is credited to have said: “A mathemati-
cian is someone to whom Z +∞ √
2 π
e−x dx =
0 2
is as obvious as twice two is four to you. Liouville was a mathematician.” Prove that
Z +∞ √
2 π
e−x dx =
0 2
by following these steps.

➊ Let a > 0 be a real number and put Da = {(x, y) ∈ R2 |x2 + y 2 ≤ a2 }. Find
Z
2 2
Ia = e−(x +y ) dxdy.
Da
➋ Let a > 0 be a real number and put ∆a = {(x, y) ∈ R2 ||x| ≤ a, |y| ≤ a}. Let
Z
2 2
Ja = e−(x +y ) dxdy.
∆a
Prove that
Ia ≤ Ja ≤ Ia √ 2 .
➌ Deduce that Z √
+∞
2 π
e−x dx = .
0 2
1
Problem 3.7.16 Let D = {(x, y) ∈ R2 : 4 ≤ x2 + y 2 ≤ 16} and f (x, y) = 2 .
Z x + xy + y 2
Find f (x, y)dA.
D
Problem 3.7.17 Prove that every closed convex region in the plane of area ≥ π has two
points which are two units apart.
Problem 3.7.18 In the xy-plane, if R is the set of points inside and on a convex polygon,
let D(x, y) be the distance from (x, y) to the nearest point R. Show that
Z +∞ Z +∞
e−D (x,y ) dxdy = 2π + L + A,
−∞ −∞
where L is the perimeter of R and A is the area of R.

Three-Manifolds
3.8 Three-Manifolds
282 Definition A 3-dimensional oriented manifold of R3 is simply an open set (body)
V ∈ R3 , where the + orientation is in the direction of the outward pointing nor-
mal to the body, and the − orientation is in the direction of the inward pointing
normal to the body. A general oriented 3-manifold is a union of open sets.
☞ The region −M has opposite orientation to M and

Z Z
ω=− ω.
−M M
We will often write Z

f dV
M
where dV denotes the volume element.
entation for the regions considered. This corresponds to using the volume form
dx ∧ dy ∧ dz.
Let V ⊆ R3 . Given a function f : V → R, the integral

Z
f dV
V
is the sum of all the values of f restricted to V . In particular,

Z
dV
V
is the oriented volume of V .
283 Example Find Z

x2 yexyz dV.
[0;1]3
Solution: ◮ The integral is

Z 1 Z 1 Z 1 Z 1 Z 1
2 xyz xy
x ye dz dy dx = x(e − 1) dy dx
0 0 0 Z01 0
= (ex − x − 1)dx
0
5
= e− .
2
◭

Chapter 3
Z
284 Example Find z dV if
R
√ √ √
R = {(x, y, z) ∈ R3 |x ≥ 0, y ≥ 0, z ≥ 0, x + y + z ≤ 1}.

Z Z Z √ 2 Z √ √
1 (1− z) (1− z− x)2
zdxdydz = z dy dx dz
R 0
Z 1 Z0 √ 0

(1− z)2 √ √
= z (1 − z − x)2 dx dz
0 0
Z 1
1 √
= z(1 − z)4 dz
6 0
1
= .
840
◭
285 Example Prove that

Z
a2 bc
xdV = ,
24
V
where V is the tetrahedron

n x y z o
V = (x, y, z) ∈ R3 : x ≥ 0, y ≥ 0, z ≥ 0, + + ≤1 .
a b c
Z Z c Z b−bz/c Z a−ay/b−az/c
xdxdydz = xdxdydz
0 0 0
V
Z Z
1 c b−bz/c ay az 2
= a− − dydz
2 Z0 0 b c
3
1 c a2 (−z + c) b
= dx
6 0 c3
a2 bc
=
24
◭
Z
286 Example Evaluate the integral xdV where S is the (unoriented) tetrahe-
S
dron with vertices (0, 0, 0), (3, 2, 0), (0, 3, 0), and (0, 0, 2). See figure 3.24.

z
b
C
b B Three-Manifolds
b A
b
O
b
b
C
x
B y
b
A
Figure 3.25: xy-projection.
Figure 3.24: Problem 286.
Solution: ◮ A short computation shews that the plane passing through

(3, 2, 0), (0, 3, 0), and (0, 0, 2) has equation 2x + 6y + 9z = 18. Hence,
18 − 2x − 6y
0≤z≤ . We must now figure out the xy limits of integra-
9
tion. In figure 3.25 we draw the projection of the tetrahedron on the xy
x
plane. The line passing through AB has equation y = − + 3. The line
3
2
passing through AC has equation y = x.
3
We find, finally,
Z Z 3 Z 3−x/3 Z (18−2x−6y)/9
xdV = xdzdydx
S 0 2x/3 0
Z 3 Z 3−x/3
18x − 2x2 − 6yx
= dydx
9
Z03 2x/3
18xy − 2x2 y − 3y 2 x 3−x/3
= dx
Z03 3 9 2x/3
x
= − 2x2 + 3x dx
0 3
9
=
4
> int(x,[x,y,z]=Tetrahedron(<0,0,0>,<3,2,0>,<0,3,0>,<0,0,2>));
◭
Z
287 Example Evaluate xyzdV , where R is the solid formed by the intersection
R
of the parabolic cylinder z = 4 − x2 , the planes z = 0, y = x, and y = 0. Use the
following orders of integration:
1. dzdxdy
2. dxdydz
Solution: ◮ We must find the projections of the solid on the the coor-
dinate planes.
1. With the order dzdxdy, the limits of integration of z can only de-
pend, if at all, on x and y. Given an arbitrary point in the solid, its

Chapter 3
lowest z coordinate is 0 and its highest one is on the cylinder, so the

limits for z are from z = 0 to z = 4 − x2 . The projection of the solid
on the xy-plane is the area bounded by the lines y = x, x = 2, and
the x and y axes.
Z 2 Z y Z 4−x2 Z Z
1 2 y
xyzdzdxdy = xy(4 − x2 )2 dxdy
0 0 0 2 Z0 Z0
1 2 y
= y(16x − 8x3 + x5 )dxdy
2
Z 2
0 0
y7
= 4y 3 − y 5 + dy
0 12
= 8.
2. With the order dxdydz, the limits of integration of x can only de-
pend, if at all, on y and z. Given an arbitrary point in the solid, x
sweeps √ from the plane to x = 2, so the limits for x are from x = y
to x = 4 − z. The projection of the solid on the yz-plane is the
area bounded by z = 4 − y 2 , and the z and y axes.
Z 4 Z √
4−z Z 2 Z 4 Z √
4−z
1
xyzdxdydz = (4y − y 3 )zdydz
0 0 y 2
Z 0 0
4 z3
= 2z − dz
0 8
= 8.
Homework
Z
Problem 3.8.1 Compute zdV where E is the region in the first octant bounded by the
E
planes y + z = 1 and x + z = 1.
Problem 3.8.2 Consider the solid S in the first octant, bounded by the
Z parabolic cylinder
x2 2
z = 2− and the planes z = 0, y = x, and y = 0. Prove that xyz = first by
2 S 3
integrating in the order dzdydx, and then by integrating in the order dydxdz.
Z Z
Problem 3.8.3 Evaluate the integrals 1dV and xdV , where R is the tetrahedron
R R
with vertices at (0, 0, 0), (1, 1, 1), (1, 0, 0), and (0, 0, 1).
Z
Problem 3.8.4 Compute xdV where E is the region in the first octant bounded by the
E
plane y = 3z and the cylinder x2 + y 2 = 9.

Change of Variables
Z
dV
Problem 3.8.5 Find where
(1 + x2 z 2 )(1 + y 2 z 2 )
D
D = {(x, y, z) ∈ R3 : 0 ≤ x ≤ 1, 0 ≤ y ≤ 1, z ≥ 0}.
3.9 Change of Variables

288 Example Find
Z
(x + y + z)(x + y − z)(x − y − z)dV,
R
where R is the tetrahedron bounded by the planes x + y + z = 0, x + y − z = 0,

x − y − z = 0, and 2x − z = 1.
Solution: ◮ We make the change of variables

u = x + y + z =⇒ du = dx + dy + dz,
v = x + y − z =⇒ dv = dx + dy − dz,
w = x − y − z =⇒ dw = dx − dy − dz.
This gives
du ∧ dv ∧ dw = −4dx ∧ dy ∧ dz.
These forms have opposite orientations, so we choose, say,
du ∧ dw ∧ dv = 4dx ∧ dy ∧ dz
which have the same orientation. Also,
2x − z = 1 =⇒ u + v + 2w = 2.
The tetrahedron in the xyz-coordinate frame is mapped into a tetrahe-
dron bounded by u = 0, v = 0, u + v + 2w = 1 in the uvw-coordinate
frame. The integral becomes
Z 2 Z 1−v/2 Z 2−v−2w
1 1
uvw dudwdv = .
4 0 0 0 180
Consider a transformation to cylindrical coordinates

(x, y, z) = (ρ cos θ, ρ sin θ, z).
From what we know about polar coordinates
dx ∧ dy = ρdρ ∧ dθ.
Since the wedge product of forms is associative,
dx ∧ dy ∧ dz = ρdρ ∧ dθ ∧ dz.
◭

Chapter 3
Z
289 Example Find z 2 dxdydz if
R
R = {(x, y, z) ∈ R3 |x2 + y 2 ≤ 1, 0 ≤ z ≤ 1}.
Solution: ◮ The region of integration is mapped into
∆ = [0; 2π] × [0; 1] × [0; 1]
through a cylindrical coordinate change. The integral is therefore

Z Z 2π Z 1 Z 1
f (x, y, z)dxdydz = dθ ρ dρ z 2 dz
R 0 0 0
π
= .
3
◭
Z
290 Example Evaluate (x2 + y 2 )dxdydz over the first octant region bounded
D
by the cylinders x2 + y 2
= 1 and x2 + y 2 = 4 and the planes z = 0, z = 1,
x = 0, x = y.
Z 1 Z π/2 Z 2 15π
ρ3 dρdθdz = .
0 π/4 1 16
291 Example Three long cylinders of radius R intersect at right angles. Find the
volume of their intersection.
Solution: ◮ Let V be the desired volume. By symmetry, V = 24 V ′ ,

where
Z
V′ = dxdydz,
D′
D ′ = {(x, y, z) ∈ R3 : 0 ≤ y ≤ x, 0 ≤ z, x2 +y 2 ≤ R2 , y 2 +z 2 ≤ R2 , z 2 +x2 ≤ R2 }.
In this case it is easier to integrate with respect to z first. Using cylindri-

cal coordinates
n h πi È o
∆′ = (θ, ρ, z) ∈ 0; × [0; R] × [0; +∞[, 0 ≤ z ≤ R2 − ρ2 cos2 θ .
4

Change of Variables
Now,
Z Z Z √R2 −ρ2 cos2 θ ! !
π/4 R
V′ = dz ρdρ dθ
0 0 0
Z π/4 Z R È
= ρ R2 − ρ2 cos2 θdρ dθ
Z0π/4 0
R
1
= − 2
(R2 − ρ2 cos2 θ)3/2 dθ
0 Z π/43 cos θ 0
R3 1 − sin3 θ
= dθ
3 0 cos2 θ √ !
Z 2
= R3 π/4 2 1 − u2
u = cos θ [tan θ]0 + du
3 1 u2
22
√
R3
= 1 − u−1 + u
3
√
1
2−1 3
= √ R .
2
Finally
√
V = 16V ′ = 8(2 − 2)R3 .
◭
Consider now a change to spherical coordinates
x = ρ cos θ sin φ, y = ρ sin θ sin φ, z = ρ cos φ.
We have
dx = cos θ sin φdρ − ρ sin θ sin φdθ + ρ cos θ cos φdφ,

dy = sin θ sin φdρ + ρ cos θ sin φdθ + ρ sin θ cos φdφ,
dz = cos φdρ − ρ sin φdφ.
This gives
dx ∧ dy ∧ dz = −ρ2 sin φdρ ∧ dθ ∧ dφ.
From this derivation, the form dρ ∧ dθ ∧ dφ is negatively oriented, and so we
choose
dx ∧ dy ∧ dz = ρ2 sin φdρ ∧ dφ ∧ dθ
instead.
Z
292 Example Let (a, b, c) ∈]0; +∞[3 be fixed. Find xyz dV if
R

3 x2 y2 z2
R= (x, y, z) ∈ R : + + ≤ 1, x ≥ 0, y ≥ 0, z ≥ 0 .
a2 b2 c2

Chapter 3
Solution: ◮ We use spherical coordinates, where
(x, y, z) = (aρ cos θ sin φ, bρ sin θ sin φ, cρ cos φ).
We have
dx ∧ dy ∧ dz = abcρ2 sin φdρ ∧ dφ ∧ dρ.
The integration region is mapped into
π π
∆ = [0; 1] × [0; ] × [0; ].
2 2
Z Z Z
2
π/2 1
5
π/2
3 (abc)2
(abc) cos θ sin θ dθ ρ dρ cos φ sin φ dφ = .
0 0 0 48
293 Example Let V = {(x, y, z) ∈ R3 : x2 + y 2 + z 2 ≤ 9, 1 ≤ z ≤ 2}. Then

Z Z 2π Z π/2−arcsin 1/3 Z 2/ cos φ
dxdydz = ρ2 sin φ dρdφdθ
0 π/2−arcsin 2/3 1/ cos φ
V
63π
= .
4
Homework
p
Problem 3.9.1 Consider the region R below the cone z = x2 + y 2 and above the
2 2
paraboloid z = x + y for 0 ≤ z ≤ 1. Set up integrals for the volume of this region
in Cartesian, cylindrical and spherical coordinates. Also, find this volume.
Z
Problem 3.9.2 Consider the integral xdV , where R is the region above the paraboloid
R
z = x2 + y 2 and under the sphere x2 + y 2 + z 2 = 4. Set up integrals for the volume of
this region in Cartesian, cylindrical and spherical coordinates. Also, find this volume.
Problem 3.9.3 Consider the region R bounded by the sphere x2 + y 2 + z 2 = 4 and the
plane z = 1. Set up integrals for the volume of this region in Cartesian, cylindrical and
spherical coordinates. Also, find this volume.
Problem 3.9.4 Prove that the volume enclosed by the ellipsoid
x2 y2 z2
2
+ 2 + 2 =1
a b c
4πabc
is . Here a > 0, b > 0, c > 0.
3

Surface Integrals
Z
Problem 3.9.5 Compute ydV where E is the region between the cylinders x2 +y 2 = 1
E
and x2 + y 2 = 4, below the plane x − z = −2 and above the xy-plane.

Z √
2 2 2
e− x +y +z dV = π 2 − 2e−R − 2Re−R − R2 e−R .
x≥0,y≥0
x 2 +y 2 +z 2 ≤R 2
Z
Problem 3.9.7 Compute y 2 z 2 dV where E is bounded by the paraboloid x = 1 − y 2 − z 2
E
and the plane x = 0.
Z
p
Problem 3.9.8 Compute z x2 + y 2 + z 2 dV where E is is the upper solid hemisphere
E
bounded by the xy-plane and the sphere of radius 1 about the origin.
Problem 3.9.9 Compute the 4-dimensional integral

Z ZZ Z
2 2 2 2
ex +y +u +v dxdydudv.
x 2 +y 2 +u 2 +v 2 ≤1
Problem 3.9.10 (Putnam Exam 1984) Find

Z
x1 y 9 z 8 (1 − x − y − z)4 dxdydz,
R
where
R = {(x, y, z) ∈ R3 : x ≥ 0, y ≥ 0, z ≥ 0, x + y + z ≤ 1}.
3.10 Surface Integrals

294 Definition A 2-dimensional oriented manifold of R3 is simply a smooth sur-
face D ∈ R3 , where the + orientation is in the direction of the outward normal
pointing away from the origin and the − orientation is in the direction of the
inward normal pointing towards the origin. A general oriented 2-manifold in R3
is a union of surfaces.
☞ The surface −Σ has opposite orientation to Σ and

Z Z
ω=− ω.
−Σ Σ
entation for the regions considered. This corresponds to using the ordered basis
{dy ∧ dz, dz ∧ dx, dx ∧ dy}.

Chapter 3
295 Definition Let f : R3 → R. The integral of f over the smooth surface Σ

(oriented in the positive sense) is given by the expression
Z

f d2 x.
Σ
Here 2 È
d x = (dx ∧ dy)2 + (dz ∧ dx)2 + (dy ∧ dz)2
is the surface area element.

Z

296 Example Evaluate z d2 x where Σ is the outer surface of the section of
Σ
the paraboloid z = x2 + y 2 , 0 ≤ z ≤ 1.
Solution: ◮ We parametrise the paraboloid as follows. Let x = u, y =

v, z = u2 +v 2 . Observe that the domain D of Σ is the unit disk u2 +v 2 ≤
1. We see that
dx ∧ dy = du ∧ dv,
dy ∧ dz = −2udu ∧ dv,
dz ∧ dx = −2vdu ∧ dv,
and so 2 p
d x = 1 + 4u2 + 4v 2 du ∧ dv.
Now, Z Z
p
z d2 x = (u2 + v 2 ) 1 + 4u2 + 4v 2 dudv.
Σ D
To evaluate this last integral we use polar coordinates, and so

Z p Z 2π Z 1 È
(u2 + v 2 ) 1 + 4u2 + 4v 2 dudv = ρ3 1 + 4ρ2 dρdθ
0 0
D
π √ 1
= (5 5 + ).
12 5
◭
297 Example Find the area of that part of the cylinder x2 + y 2 = 2y lying inside
the sphere x2 + y 2 + z 2 = 4.
x2 + y 2 = 2y ⇐⇒ x2 + (y − 1)2 = 1.
We parametrise the cylinder by putting x = cos u, y − 1 = sin u, and

z = v. Hence
dx = − sin udu, dy = cos udu, dz = dv,

Surface Integrals
whence
dx ∧ dy = 0, dy ∧ dz = cos udu ∧ dv, dz ∧ dx = sin udu ∧ dv,
and so
2 È
d x = (dx ∧ dy)2 + (dz ∧ dx)2 + (dy ∧ dz)2
È
= cos2 u + sin2 u du ∧ dv
= du ∧ dv.
The cylinder and the sphere intersect when x2 + y 2 = 2y and x2 + y 2 +

z 2 = 4, that is, when z 2 = 4−2y, i.e. v 2 = 4−2(1+sin u) = 2−2 sin u.
Also 0 ≤ u ≤ π. The integral is thus
Z Z Z √ Z p
2 π 2−2 sin u π
d x = dvdu = 2 2 − 2 sin udu
√
0 − 2−2 sin u 0
Σ
√ Z πp
= 2 2 1 − sin u du
√ 0 √
= 2 2 4 2−4 .
◭
298 Example Evaluate

Z
xdydz + (z 2 − zx)dzdx − xydxdy,
Σ
where Σ is the top side of the triangle with vertices at (2, 0, 0), (0, 2, 0), (0, 0, 4).
Solution: ◮ Observe that the plane passing through the three given
points has equation 2x + 2y + z = 4. We project this plane onto the
coordinate axes obtaining
Z Z 4 Z 2−z/2 8
xdydz = (2 − y − z/2)dydz = ,
0 0 3
Σ
Z Z 2 Z 4−2x
(z 2 − zx)dzdx = (z 2 − zx)dzdx = 8,
0 0
Σ
Z Z 2 Z 2−y 2
− xydxdy = − xydxdy = − ,
0 0 3
Σ
and hence
Z
xdydz + (z 2 − zx)dzdx − xydxdy = 10.
Σ

Chapter 3
Homework
Z

Problem 3.10.1 Evaluate y d2 x where Σ is the surface z = x + y 2 , 0 ≤ x ≤ 1, 0 ≤
Σ
y ≤ 2.
p
Problem 3.10.2 Consider the cone z = x2 + y 2 . Find the surface area of the part of
the cone which lies between the planes z = 1 and z = 2.
Z

Problem 3.10.3 Evaluate x2 d2 x where Σ is the surface of the unit sphere x2 + y 2 +
Σ
z 2 = 1.
Z
p
Problem 3.10.4 Evaluate z d2 x over the conical surface z = x2 + y 2 between
S
z = 0 and z = 1.
Problem 3.10.5 You put a perfectly spherical egg through an egg slicer, resulting in n
slices of identical height, but you forgot to peel it first! Shew that the amount of egg shell
in any of the slices is the same. Your argument must use surface integrals.
Problem 3.10.6 Evaluate

Z
xydydz − x2 dzdx + (x + z)dxdy,
Σ
where Σ is the top of the triangular region of the plane 2x + 2y + z = 6 bounded by the
first octant.
3.11 Green’s, Stokes’, and Gauss’ Theorems

We are now in position to state the general Stoke’s Theorem.
299 Theorem (General Stoke’s Theorem) Let M be a smooth oriented manifold,

having boundary ∂M . If ω is a differential form, then
Z Z
ω= dω.
∂M M
In R2 , if ω is a 1-form, this takes the name of Green’s Theorem.

I
300 Example Evaluate (x − y 3 )dx + x3 dy where C is the circle x2 + y 2 = 1.
C

Green’s, Stokes’, and Gauss’ Theorems
Solution: ◮ We will first use Green’s Theorem and then evaluate the
integral directly. We have
dω = d(x − y 3 ) ∧ dx + d(x3 ) ∧ dy
= (dx − 3y 2 dy) ∧ dx + (3x2 dx) ∧ dy
= (3y 2 + 3x2 )dx ∧ dy.
The region M is the area enclosed by the circle x2 + y 2 = 1. Thus by

Green’s Theorem, and using polar coordinates,
I Z
(x − y 3 )dx + x3 dy = (3y 2 + 3x2 )dxdy
C ZM2π Z 1
= 3ρ2 ρdρdθ
0 0
3π
. =
2
Aliter: We can evaluate this integral directly, again resorting to polar
coordinates.
I Z 2π
(x − y 3 )dx + x3 dy = (cos θ − sin3 θ)(− sin θ)dθ + (cos3 θ)(cos θ)dθ
C Z02π
= (sin4 θ + cos4 θ − sin θ cos θ)dθ.
0
To evaluate the last integral, observe that 1 = (sin2 θ + cos2 θ)2 =

sin4 θ + 2 sin2 θ cos2 θ + cos4 θ, whence the integral equals
Z 2π Z 2π
4 4
(sin θ + cos θ − sin θ cos θ)dθ = (1 − 2 sin2 θ cos2 θ − sin θ cos θ)dθ
0 0
3π
= .
2
◭
In general, let
ω = f (x, y)dx + g(x, y)dy
2
be a 1-form in R . Then
dω = df (x, y) ∧ dx + dg(x, y) ∧ dy

∂ ∂ ∂ ∂
= f (x, y)dx + f (x, y)dy ∧ dx + g(x, y)dx + g(x, y)dy ∧ dy
∂x ∂y ∂x ∂y
∂ ∂
= g(x, y) − f (x, y) dx ∧ dy
∂x ∂y
which gives the classical Green’s Theorem
Z Z
∂ ∂
f (x, y)dx + g(x, y)dy = g(x, y) − f (x, y) dxdy.
∂x ∂y
∂M M
In R3 , if ω is a 2-form, the above theorem takes the name of Gauß’ or the

Divergence Theorem.

Chapter 3
Z
301 Example Evaluate (x − y)dydz + zdzdx − ydxdy where S is the surface
S
of the sphere
x2 + y 2 + z 2 = 9
and the positive direction is the outward normal.
Solution: ◮ The region M is the interior of the sphere x2 +y 2 +z 2 = 9.

Now,
dω = (dx − dy) ∧ dy ∧ dz + dz ∧ dz ∧ dx − dy ∧ dx ∧ dy
= dx ∧ dy ∧ dz.

Z
4π
dxdydz = (27)
3
M
= 36π.
Aliter: We could evaluate this integral directly. We have

Z Z
(x − y)dydz = xdydz,
Σ Σ
since (x, y, z) 7→ −y is an odd function of y and the domain of integra-

tion is symmetric with respect to y. Now,
Z Z 3 Z 2π È
xdydz = |ρ| 9 − ρ2 dρdθ
Σ −3 0
= 36π.
Also Z
zdzdx = 0,
Σ
since (x, y, z) 7→ z is an odd function of z and the domain of integration

is symmetric with respect to z. Similarly
Z
−ydxdy = 0,
Σ
since (x, y, z) 7→ −y is an odd function of y and the domain of integra-

tion is symmetric with respect to y. ◭
In general, let
ω = f (x, y, z)dy ∧ dz + g(x, y, z)dz ∧ dx + h(x, y, z)dx ∧ dy

be a 2-form in R3 . Then
dω = df (x, y, z)dy ∧ dz + dg(x, y, z)dz ∧ dx + dh(x, y, z)dx ∧ dy

∂ ∂ ∂
= f (x, y, z)dx + f (x, y, z)dy + f (x, y, z)dz ∧ dy ∧ dz
∂x ∂y ∂z
∂ ∂ ∂
+ g(x, y, z)dx + g(x, y, z)dy + g(x, y, z)dz ∧ dz ∧ dx
∂x ∂y ∂z
∂ ∂ ∂
+ h(x, y, z)dx + h(x, y, z)dy + h(x, y, z)dz ∧ dx ∧ dy
∂x ∂y ∂z
∂ ∂ ∂
= f (x, y, z) + g(x, y, z) + h(x, y, z) dx ∧ dy ∧ dz,
∂x ∂y ∂z
which gives the classical Gauss’s Theorem
Z Z
∂ ∂ ∂
f (x, y, z)dydz+g(x, y, z)dzdx+h(x, y, z)dxdy = f (x, y, z) + g(x, y, z) + h(x, y, z) dx
∂x ∂y ∂z
∂M M
Using classical notation, if

2 3 2 3
f (x, y, z) dydz
→
− 6 7 → − 6 7
a = 4 g(x, y, z) 5 , d S = 4dzdx5 ,
h(x, y, z) dxdy
then Z Z
→
−
(∇ • →
−
a )dV = →
−
a •dS.
M ∂M
The classical Stokes’ Theorem occurs when ω is a 1-form in R3 .

I
302 Example Evaluate ydx+(2x−z)dy+(z−x)dz where C is the intersection
C
of the sphere x2 + y 2 + z = 4 and the plane z = 1.
2
dω = (dy) ∧ dx + (2dx − dz) ∧ dy + (dz − dx) ∧ dz
= −dx ∧ dy + 2dx ∧ dy + dy ∧ dz + dz ∧ dx
= dx ∧ dy + dy ∧ dz + dz ∧ dx.
Since on C, z = 1, the surface Σ on which we are integrating is the
inside of the circle x2 + y 2 + 1 = 4, i.e., x2 + y 2 = 3. Also, z = 1 implies
dz = 0 and so Z Z
dω = dxdy.
Σ Σ
Since this is just the area of the circular region x2 + y 2 ≤ 3, the integral
evaluates to Z
dxdy = 3π.
Σ

Chapter 3
In general, let
ω = f (x, y, z)dx + g(x, y, z)dy + +h(x, y, z)dz
be a 1-form in R3 . Then
dω = df (x, y, z) ∧ dx + dg(x, y, z) ∧ dy + dh(x, y, z) ∧ dz

∂ ∂ ∂
= f (x, y, z)dx + f (x, y, z)dy + f (x, y, z)dz ∧ dx
∂x
∂y ∂z
∂ ∂ ∂
+ g(x, y, z)dx + g(x, y, z)dy + g(x, y, z)dz ∧ dy
∂x
∂y ∂z
∂ ∂ ∂
+ h(x, y, z)dx + h(x, y, z)dy + h(x, y, z)dz ∧ dz
∂x ∂y ∂z
∂ ∂
= h(x, y, z) − g(x, y, z) dy ∧ dz
∂y ∂z
∂ ∂
+ f (x, y, z) − h(x, y, z) dz ∧ dx
∂z ∂x
∂ ∂
g(x, y, z) − f (x, y, z) dx ∧ dy
∂x ∂y
which gives the classical Stokes’ Theorem
Z
f (x, y, z)dx + g(x, y, z)dy + h(x, y, z)dz
∂M Z
∂ ∂
= h(x, y, z) − g(x, y, z) dydz
∂y ∂z
M
∂ ∂
+ g(x, y, z) − f (x, y, z) dxdy
∂z ∂x
∂ ∂
+ h(x, y, z) − f (x, y, z) dxdy.
∂x ∂y
Using classical notation, if
2 3 2 3 2 3
f (x, y, z) dx dydz
→
− 6 7 6 7 →
− 6 7
a = 4 g(x, y, z) 5 , d→
−
r = 4dy 5 , d S = 4dzdx5 ,
h(x, y, z) dz dxdy
then Z Z
→
−
(∇ × →
−
a)•dS = →
−
a • d→
−
r.
M ∂M
Homework
I
Problem 3.11.1 Evaluate x3 ydx + xydy where C is the square with vertices at (0, 0),
C
(2, 0), (2, 2) and (0, 2).

Problem 3.11.2 Consider the triangle △ with vertices A : (0, 0), B : (1, 1), C : (−2, 2).
➊ If LP Q denotes the equation of the line joining P and Q find LAB , LAC , and LB C .
➋ Evaluate I
y 2 dx + xdy.
△
➌ Find Z
(1 − 2y)dx ∧ dy
D
where D is the interior of △.
Problem 3.11.3 Problems 1 through 4 refer to the differential form
ω = xdy ∧ dz + ydz ∧ dx + 2zdx ∧ dy,
and the solid M whose boundaries are the paraboloid z = 1 − x2 − y 2 , 0 ≤ z ≤ 1 and

the disc x2 + y 2 ≤ 1, z = 0. The surface ∂M of the solid is positively oriented upon
considering outward normals.
1. Prove that dω = 4dx ∧ dy ∧ dz.
Z Z 1 Z √ 1−x 2 Z 1−x 2 −y 2
2. Prove that in Cartesian coordinates, ω= √ 4dzdydx.
∂M −1 − 1−x 2 0
Z Z 2π Z 1 Z 1−r 2
3. Prove that in cylindrical coordinates, dω = 4rdzdrdθ.
M 0 0 0
Z
4. Prove that xdydz + ydzdx + 2zdxdy = 2π.
∂M
Problem 3.11.4 Problems 1 through 4 refer to the box
M = {(x, y, z) ∈ R3 : 0 ≤ x ≤ 1, 0 ≤ y ≤ 1, 0 ≤ z ≤ 2},
the upper face of the box
U = {(x, y, z) ∈ R3 : 0 ≤ x ≤ 1, 0 ≤ y ≤ 1, z = 2},
the boundary of the box without the upper top S = ∂M \ U , and the differential form
ω = (arctan y − x2 )dy ∧ dz + (cos x sin z − y 3 )dz ∧ dx + (2zx + 6zy 2 )dx ∧ dy.
1. Prove that dω = 3y 2 dx ∧ dy ∧ dz.

Z
2. Prove that (arctan y − x2 )dydz + (cos x sin z − y 3 )dzdx + (2zx + 6zy 2 )dxdy =
Z 2 Z 1 Z 1 ∂M
3y 2 dxdydz = 2. Here the boundary of the box is positively oriented
0 0 0
considering outward normals.
Z
3. Prove that the integral on the upper face of the box is (arctan y − x2 )dydz +
Z 1Z 1 U
(cos x sin z − y 3 )dzdx + (2zx + 6zy 2 )dxdy = 4x + 12y 2 dxdy = 6.

0 0

Chapter 3
Z
4. Prove that the integral on the open box is (arctan y − x2 )dydz +(cos x sin z −
∂ M \U
y 3 )dzdx + (2zx + 6zy 2 )dxdy = −4.
Problem 3.11.5 Problems 1 through 3 refer to a triangular surface T in R3 and a differ-

ential form ω. The vertices of T are at A(6, 0, 0), B(0, 12, 0), and C(0, 0, 3). The boundary
of of the triangle ∂T is oriented positively by starting at A, continuing to B, following to
C, and ending again at A. The surface T is oriented positively by considering the top of
the triangle, as viewed from a point far above the triangle. The differential form is

y2
ω = (2xz + arctan ex ) dx + (xz + (y + 1)y ) dy + xy + + log(1 + z 2 ) dz.
2
1. Prove that the equation of the plane that contains the triangle T is 2x + y + 4z = 12.
2. Prove that dω = ydy ∧ dz + (2x − y) dz ∧ dx + zdx ∧ dy.
Z
y2
3. Prove that (2xz + arctan ex ) dx+(xz + (y + 1)y ) dy+ xy + + log(1 + z 2 ) dz =
2
Z 3 Z 12−4z ∂ T Z 6 Z 3−x/2
ydydz + 2xdzdx=108.
0 0 0 0
Problem 3.11.6 Use Green’s Theorem to prove that

Z
(x2 + 2y 3 )dy = 16π,
Γ
2 2
where Γ is the circle (x − 2) + y = 4. Also, prove this directly by using a path integral.
Problem 3.11.7 Let Γ denote the curve of intersection of the plane x + y = 2 and the
sphere x2 − 2x + y 2 − 2y + z 2 = 0, oriented clockwise when viewed from the origin. Use
Stoke’s Theorem to prove that
Z
√
ydx + zdy + xdz = −2π 2.
Γ
Prove this directly by parametrising the boundary of the surface and evaluating the path
integral.
Problem 3.11.8 Use Green’s Theorem to evaluate

I
(x3 − y 3 )dx + (x3 + y 3 )dy,
C
where C is the positively oriented boundary of the region between the circles x2 + y 2 = 2
and x2 + y 2 = 4.

A Answers and Hints
→
−
1.1.1 No. The zero vector 0 , has magnitude but no direction.
−→ −→ −→ −→ −→ −→ −→ −→ −→
1.1.2 We have 2BC = BE + EC. By Chasles’ Rule AC = AE + EC, and BD = BE + ED.
We deduce that
−→ −→ −→ −→ −→ −→ −→ −→
AC + BD = AE + EC + BE + ED = AD + BC.
−→ −→
But since ABCD is a parallelogram, AD = BC. Hence
−→ −→ −→ −→ −→
AC + BD = AD + BC = 2BC.
−
→ −
→ −
→ −
→ −→ −
→ −→
1.1.4 We have IA = −3IB ⇐⇒ IA = −3(IA + AB) = −3IA − 3AB. Thus we deduce
−
→ −
→ −→ −
→ −→
IA + 3IA = −3AB ⇐⇒ 4IA = −3AB
−
→ −→
⇐⇒ 4AI = 3AB
−
→ 3 −→
⇐⇒ AI = AB.
4
Similarly
−→ 1−→ −→ −
→
JA = − JB ⇐⇒ 3JA = −JB
3 −→ −→ −→
⇐⇒ 3JA = −JA − AB
−→ −→
⇐⇒ 4JA = −AB
−→ 1 −→
⇐⇒ AJ = AB
4
.
−
→ 3 −→ −
→ 1 −→
Thus we take I such that AI = AB and J such that AJ = AB.
4 4
Now
−−→ −−
→ −→ − → −
→
MA + 3MB = MI + IA + 3IB
−→ − → −
→
= 4MI + IA + 3IB
−→
= 4MI,
and
−−→ −−→ −→ −→ −→ − →
3MA + MB = 3MJ + 3JA + MJ + JB
−→ −→ − →
= 4MJ + 3JA + JB
−→
= 4MJ.
1.1.5
x + 1 = t = 2 − y =⇒ y = −x + 1.
4 3 4 2 1
1.1.6 α = ,β = , l = ,m = ,n = .
7 7 9 9 3
→
− →
− →
− →
− →
−
1.1.8 [A]. 0 , [B]. 0 , [C]. 0 , [D]. 0 , [E]. 2→
−
c (= 2 d )
186
Appendix A
1.3.2 Plainly,
a b − a −1 a+b 1
= + .
b 2 1 2 1
1
1.4.1 a = −3, b = − .
2
1.4.2 The desired transformations are in figures A.1 through A.3.
5 5
5
4 4
4
3 3
3
2 2
2
1 1
1
0 0
0
-1 -1
-1
-2 -2
-2
-3 -3
-3
-4 -4
-4
-4 -3 -2 -1 0 1 2 3 4 5 -4 -3 -2 -1 0 1 2 3 4 5
-4 -3 -2 -1 0 1 2 3 4 5
Figure A.1: Horizontal Figure A.2: Vertical Stretch. Figure A.3: Horizontal and
Stretch. Vertical Stretch.
1.4.3 The desired transformations are shewn in figures through A.4 A.7.
1.4.8 The transformations are shewn in figures A.8 through A.10.

a b
1.4.9 , bc = −a2
c −a
1.5.1 Upon solving the equations
−3a1 + 2a2 = 0, a21 + a22 = 13
we find (a1 , a2 ) = (2, 3) or (a1 , a2 ) = (−2, −3).

5 5 5
4 4 4
3 3 3
2 2 2
Answers and Hints
1 1 1
0 0 0
-1 -1 -1
-2 -2 -2
-3 -3 -3
5
-4 -4 -4
4 -4 -3 -2 -1 0 1 2 3 4 5 -4 -3 -2 -1 0 1 2 3 4 5 -4 -3 -2 -1 0 1 2 3 4 5
3
2 Figure A.4: Levogyrate rota- Figure A.5: Levogyrate rota- Figure A.6: Dextrogyrate ro-
π π π
1 tion radians. tion radians. tation radians.
2 4 2
0
-1
-2
-3
-4
-4 5 -3 -2 -1 0 1 2 3 4 5 5 5
4 4 4
Figure
3 A.7: Dextrogyrate ro- 3 3
π
tation
2 radians. 2 2
4
1 1 1
0 0 0
-1 -1 -1
-2 -2 -2
-3 -3 -3
-4 -4 -4
-4 -3 -2 -1 0 1 2 3 4 5 -4 -3 -2 -1 0 1 2 3 4 5 -4 -3 -2 -1 0 1 2 3 4 5
Figure A.8: Reflexion about Figure A.9: Reflexion about Figure A.10: Reflexion about
the x-axis. the y-axis . the origin.
→
−
1.5.2 Since →
−
a • b = 0, we have
→
− →
− →
−
||→
−
a + b ||2 = (→
−a + b )•(→ −a + b)
→
− →
− →
− →
−
= a •→
−a + 2→ −a•b + b•b
→
− →
− →
−
= a •→
−a +0+ b•b
→
− →
−
= || a ||2 + || b ||2 ,
from where the desired result follows.
1.5.3 By the CBS Inequality,
(a2 · 1 + b2 · 1) ≤ (a4 + b4 )1/2 (12 + 12 )1/2 ,
whence the assertion follows.

→
− →
−
1.5.4 We have ∀→ −
v ∈ R2 , →
−v • (→−a − b ) = 0. In particular, choosing → −
v = → −
a − b , we
gather
→
− →
− →
−
(→−a − b )•(→ −
a − b ) = ||→ −a − b ||2 = 0.
→
− →
−
But the norm of a vector is 0 if and only if the vector is the 0 vector. Therefore →
−
a − b =
→
− →
−
0 , i.e., →
−
a = b.

Appendix A
1.5.5 We have
||→
−
u +→
−v ||2 − ||→
−
u −→
−
v ||2 = (→
−u +→ −v )•(→
−
u +→−v ) − (→
−
u −→ −
v )•(→
−
u −→ −v)
= →
−u • u + 2 u • v + v • v − ( u • u − 2 u •→
→
− →
− →
− →
− →
− →
− →
− →
− −
v +→
−
v •→
−
v)
= →
−
4u•v, →
−
giving the result.

1.5.6 A parametric equation for L1 is

x 0 1
= +t .
y b1 m1
A parametric equation for L2 is

x 0 1
= +t .
y b2 m2
The lines are perpendicular if and only if, according to Corollary 22,

1 1
• = 0 ⇐⇒ 1 + m 1 m 2 = 0 ⇐⇒ m 1 m 2 = −1.
m1 m2
1.5.7 The line L has a parametric equation

x 0 1
= +t .
y 1 −1
Let L′ have parametric equation

x 0 1
= +t .
y b m

1 1 π
We need the angle between and to be and so by Theorem 21,
m −1 6
p √ π √
1−m = 1 + m 2 2 cos =⇒ m = −2 ± 3.
6

′ ′ −1
This gives two possible values for the slope of L . Now, since L must pass through
2
√ √ √
y = (−2 ± 3)x + b =⇒ 2 = (−2 ± 3)(−1) + b =⇒ b = ± 3
√ √ √ √
and the lines are y = (−2 + 3)x + 3 and y = (−2 − 3)x − 3, respectively.
1.5.8 We must prove that →
−
a •→−
w = 0. Using the distributive law for the dot product,

→
−
v •→
−w → →
−v •→
−
w − •→
→−
v − 2 w • →
− −
w = → −
v •→
−w − 2 → w − w
w
→
− w
→
−
→
− w − 2
v •→
−
= → −
v •→
−w − 2 → w
→
−w

= → −
v •→
−w −→ −v •→
−w
= 0.

Answers and Hints
y−x
1.6.1 We have y − x = 4t =⇒ t = and so
4

y−x 3 y−x
x= −2
4 4
is the Cartesian equation sought.
1.6.2 Observe that for t 6= {0, −1},

y 2
y x y 2 x3
= t =⇒ x = y 5 =⇒ x = 5 5
=⇒ x5 + y 5 = x2 y 2 .
x 1+ x + y
x
If t = 0, then x = 0, y = 0 and our Cartesian equation agrees. What happens as t → −1?
1.6.3
1. ay − cx = ad − bc, this is a straight line with positive slope.
2. −1 ≤ x ≤ 1, y = 0, this is the line segment on the plane joining (−1, 0) to (1, 0).
x2 y2
3. 2
− 2 = 1, x > 0. This is one branch of a hyperbola.
a b
x2 y2
4. 2 − 2 = 1. This is a hyperbola.
a b
π
1.6.4 We may simply give the trivial parametrisation: x = t, y = log cos t, 0 ≤ t ≤ .
3
Then
(dx)2 + (dy)2 = (1 + tan2 t)(dt)2 = sec2 t(dt)2 .
Hence the arc length is
Z π /3 √
sec tdt = log(2 + 3).
0
1.6.5 Observe that y = 2x + 1, so the trace is part of this line. Since in the interval
[0; 4π], −1 ≤ sin t ≤ 1, we want the portion of the line y = 2x + 1 with −1 ≤ x ≤ 1
(and, thus −1 ≤ y ≤ 3). The curve starts at the middle point (0, 1) (at t = 0), reaches
π 3π
the high point (1, 3) at t = , reaches its low point (−1, 1) at t = , reaches its high
2 2
5π 7π
point (1, 3) again at t = , it goes to its low point (−1, 1) at t = , and finishes in the
2 2
middle point (0, 1) when t = 4π.
√ √
1.6.6 First observe that x + y = 1 demands x ∈ [0; 1] and [0; 1]. Again, one can give
many parametrisations. One is x = t2 , y = (1 − t)2 , t ∈ [0; 1]. This gives
È È É
p 2 1 2
2 2 2 2 2
(dx) + (dy) = 4t + (2 − 2t) dt = 2 2t − 2t + 1 dt = √ 4 t− + 1 dt.
2 2
To integrate
Z 1É
2 1 2
√ 4 t− + 1 dt,
2 0 2
we now use the trigonometric substitution

1 1
2 t− = tan θ =⇒ dt = sec2 θdθ.
2 2

Appendix A
The integral thus becomes

Z π /4
√
2 sec3 θdθ,
0
the famous secant cube integral, which is Za standard example of integration
Z by parts
where you “solve” for the integral. (You write sec θd tan θ = tan θ sec θ − tan θd sec θ,
etc.) I will simply quote it, as I assume most of you have seen it, and it appears in most
Calculus texts:
Z π /4
√ √ 1 1
π /4
2 sec3 θdθ = 2 sec θ tan θ − log | sec θ + tan θ|
2 2
√ 1 √
0 0
1 √
= 2 · 2 + log( 2 + 1)
2 2
1 √
= √ log( 2 + 1) + 1.
2
1.6.7 First notice that x = 1 =⇒ t3 + 1 = 1 =⇒ t = 0 and x = 2 =⇒ t3 + 1 =

2 =⇒ t = 1. The area under the graph is
Z t=1 Z t=1 Z t=1
2 3 2
ydx = (1 − t )d(t + 1) = 3t2 (1 − t2 )dt = .
t=0 t=0 t=0 5
1.6.8 Observe that

È p
dx = 6tdt; dy = 6t2 dt =⇒ (dx)2 + (dy)2 = 6t 1 + t2 dt,
and so the arc length is
Z t=1 È Z t=1 p √
(dx)2 + (dy)2 = 6t 1 + t2 dt = 4 2 − 2.
t=0 t=0
1.6.9 Observe that

√ È È √ p
dx = tdt, dy = 2t + 1dt =⇒ (dx)2 + (dy)2 = t2 + ( 2t + 1)2 dt = t2 + 2t + 1dt = (t+1)dt.
Hence, the arc length is
Z 1/2 1/2
t2
(1 + t)dt = t+ = 1.
−1/2 2 −1/2
1.6.10 Observe that the parametrisation traverses the curve once clockwise if t ∈ [0; 2π].
The area is given by
I I
1 x dx 1
det = xdy − ydx
2 Γ y dy 2
Z 0
4
= (sin3 t(− sin t(1 + sin2 t) + 2 sin t cos2 t)
2 π /2
− cos t(1 + sin2 t)(3 sin2 t cos t))dt
Z 0
= 2 (−3 sin2 t + sin4 t)dt
Z 0
π /2

9 1
= 2 − + cos 2t + cos 4t dt
π /2 8 8
9π
= .
8

Answers and Hints
1.6.11 Using the quotient rule,
3(1 + t3 ) − 3t2 (3t) 3 − 6t3 9t2 − 18t5

dx = · dt = · dt =⇒ ydx = · dt
(1 + t3 )2 (1 + t3 )2 (1 + t3 )3
and
6t(1 + t3 ) − 3t2 (3t2 ) 6t − 3t4 18t2 − 9t5
dy = 3 2
· dt = 3 2
· dt =⇒ xdy = · dt
(1 + t ) (1 + t ) (1 + t3 )3
Hence
18t2 − 9t5 9t2 − 18t5 9t2 + 9t5 9t2 (1 + t3 ) 9t2
xdy−ydx = ·dt− ·dt = ·dt = ·dt = ·dt.
(1 + t3 )3 (1 + t3 )3 (1 + t3 )3 (1 + t3 )3 (1 + t3 )2
Observe that when t = 0 then x = y = 0. As t → +∞, then x → 0 and y → 0. Hence to
obtain the loop Using integration by substitution (u = 1 + t3 and du = 3t2 dt) , the area
is given by
Z +∞ Z +∞ Z +∞
1 9t2 3 3t2 3 du 3
· dt = dt = = .
2 0 (1 + t3 )2 2 0 (1 + t3 )2 2 1 u2 2
☞ A shorter way of obtaining xdy − ydx would have been to argue that
y 9t2
xdy − ydx = x2 d = dt.
x (1 + t3 )2
1.6.12 See figure 1.58. Let θ be the angle (in radians) of rotation of the circle, and let C
be the centre of the circle. At θ = 0 the centre of the circle is at (0, ρ), and P = (0, ρ − d).
Suppose the circle is displaced towards the right, making the point P to rotate an angle
of θ radians. Then the centre of the circle has displaced rθ units horizontally, and so
is now located at (ρθ, ρ). The polar coordinates of the point P are (d sin θ; d cos θ), in
relation to the centre of the circle (notice that the circle moves clockwise). The point P
has moved x = ρθ − d sin θ horizontal units and y = ρ − d cos θ units. This is the desired
parametrisation.
1.6.14 We have
È È
dx = et (cos t−sin t)dt, dy = et (sin t+cos t)dt =⇒ (dx)2 + (dy)2 = et (cos t − sin t)2 + (sin t + cos t)2 dt =
The arc length is thus

Z πÈ Z π
√ √
(dx)2 + (dy)2 = 2 et dt = 2(eπ − 1).
0 0
1.6.15 Choose coordinates so that the origin is at the position of the gun, the y-axis is
vertical, and the airplane is on a point with coordinates (u, h) with u ≥ 0.
If the gun were fired at t = 0, then
gt2
x = V t cos a; y = V t sin a − ,
2
where a is the angle of elevation, t is the time and g is the acceleration due to gravity.
Since we know that the shell strikes the plane, we must have
gt2
u = V t cos a; h = V t sin a − ,
2

Appendix A
whence 2
1
u2 + h + gt2 = V 2 t2 ,
2
and thus
g 2 t4
+ (gh − V 2 )2 t2 + h2 + u2 = 0.
4
The quadratic equation in t2 has a real root if
(gh − V 2 )2 ≥ g 2 (h2 + u2 ) =⇒ g 2 u2 ≤ V 2 (V 2 − 2gh),
from where the assertion follows.
1.6.16 Suppose the parabolas have a point of contact P = (4px20 , 4px0 ). By symmetry,
the vertex V of the rolling parabola is the reflexion of the origin about the line tangent to
1
their point of contact. The slope of the tangent at P is , from where the equation of
2x0
the tangent is
x
y= + 2px0 .
2x0
The line normal to this line and passing through the origin is hence
y = −2xx0 ,
and so the lines intersect at

4px20 8px30
− , ,
1 + 4x20 1 + 4x20
from where
8px20 16px30
V = − , := (x(t), y(t)).
1 + 4x0 1 + 4x20
2
As −2x0 x(t) = y(t), eliminating t yields

y 2
2p x
x=−
y 2
1+ x
or
(x2 + y 2 )x + 2py 2 = 0,
giving the equation of the locus.
1.7.1 Observe that, in general,

→ 2 2 2
→
− − 2
→ →
− − 2
→ − →
− →
− →
− →
−
a − 2→
−a • b + b + →
−
a + 2→
−
2
a − b + a + b = a • b + b
− 2 2
→
−
= 2→a + 2 b ,
whence
É 2 È
→
− −
→ →
− 2 →
− →
− −
→
a − b = 2 a + 2 b − a + b = 2(13)2 + 2(19)2 − (24)2 = 22.
Ǒ Ǒ 2 3
x 1 −2
6 7
1.7.2 y = 2 + t 4−15 .
z 3 0

Answers and Hints
1.7.3 The vectorial form of the equation of the line is

2 3 2 3
1 1
→
− 6 7 6 7
r = 405 + t 4−25 .
1 −1
2 3 2 3
1 1
6 7 6 7
Since the line follows the direction of 4−25, this means that 4−25 is normal to the plane,
−1 −1
and thus the equation of the desired plane is
(x − 1) − 2(y − 1) − (z − 1) = 0.
Ǒ
0
1.7.4 Observe that 0 (as 0 = 2(0) = 3(0)) is on the line, and hence on the plane.
0
Thus the vector 2 3 2 3
1−0 1
6 7 6 7
4−1 − 05 = 4−15
−1 − 0 −1
lies on the plane. Now, if x = 2y = 3z = t, then x = t, y = t/2, z = t/3. Hence, the
vectorial form of the equation of the line is
2 3 2 3 2 3
0 1 1
→
− 6 7 6 7 6 7
r = 405 + t 41/25 = t 41/25 .
0 1/3 1/3
2 3
1
6 7
This means that 41/25 also lies on the plane, and thus
1/3
2 3 2 3 2 3
1 1 1/6
6 7 6 7 6 7
4−15 × 41/25 = 4−4/35
−1 1/3 3/2
is normal to the plane. The desired equation is thus

1 4 3
x − y + z = 0.
6 3 2
1.7.5 The set B can be decomposed into the following subsets:

➊ The set A itself, of volume abc.
➋ Two a × b × 1 bricks, two b × c × 1 bricks, and two c × a × 1 bricks,
➌ Four quarter-cylinders of length a and radius 1, four quarter-cylinders of length b
and radius 1, and four quarter-cylinders of length c and radius 1,
➍ Eight eighth-of-spheres of radius 1.

Appendix A
Thus the required formula for the volume is

4π
abc + 2(ab + bc + ca) + π(a + b + c) + .
3
1.7.6 We have,
2 → 2
→ →
− − − → − → − → − → − 2 →− − → − → − →
a + b + c = ( a + b + c )•( a + b + c ) = a + b + c +2( a • b + b • c + c • a ),
− → → − → − →
− 2 → − → − → −
from where we deduce that

→
− →
− →
− − −32 − 42 − 52
a • b + b •→c +→ −c •→
−
a = = −25.
2
2 3
a
6 7
1.7.7 A vector normal to the plane is 4a2 5. The line sought has the same direction as
a2
this vector, thus the equation of the line is
2 3 2 3 2 3
x 0 a
6 7 6 7 6 27
4y 5 = 405 + t 4a 5 , t ∈ R.
2
z 1 a
1.7.8 Put ax = by = cz = t, so x = t/a; y = t/b; z = t/c. The parametric equation of

the line is 2 3 2 3
x 1/a
6 7 6 7
4y 5 = t 4 1/b 5 , t ∈ R.
z 1/c
2 3
1/a
6 7
Thus the vector 4 1/b 5 is perpendicular to the plane. Therefore, the equation of the plane
1/c
is 2 3 2 2 3 3
1/a x−1
0
6 7•6 7 6 7
4 1/b 5 4y − 15 = 405 ,
1/c z−1 0
or
x y z 1 1 1
+ + = + + .
a b c a b c
We may also write this as
bcx + cay + abz = ab + bc + ca.
2 3
1
6 7
1.7.9 The vector 4−15 is perpendicular to the plane. Hence, the shortest distance from
1
(1, 2, 3) is obtained by the perpendicular line to the plane that pierces the plane, this
perpendicular line to the plane has equation
Ǒ Ǒ 2 3
x 1 1
6 7
y = 2 + t 4−15 =⇒ x = 1 + t, y = 2 − t, z = 3 + t.
z 3 1

Answers and Hints
The intersection of the line and the plane occurs when

1
1 + t − (2 − t) + (3 + t) = 1 =⇒ t = − .
3

2 7 8
The closest point on the plane to (1, 2, 3) is therefore , , , and the distance sought
3 3 3
is É √
2 7 8 3
(1 − )2 + (2 − )2 + (3 − )2 = .
3 3 3 3
1.7.10 If the lines intersected, there would be a value t′ for which

Ǒ 2 3 Ǒ 2 3 2 3 2 3 2 3 2 3
1 2 0 2 1−0 2−2 1 0
′ 6 7 ′ 6 7 6 7 ′ 6 7 6 7 ′ 6 7
1 + t 415 = 0 + t 4−15 =⇒ 41 − 05 = t 4−1 − 15 =⇒ 415 = t 4−25 ,
1 1 1 1 1−1 1−1 0 0
which is clearly impossible, and so the lines are skew. Let θ be the angle between them.
Then

2 · 2 + 1 · (−1) + 1 · 1 4 2
cos θ = p p = √ √ =⇒ θ = arccos .
(2)2 + (1)2 + (1)2 (2)2 + (−1)2 + (1)2 6 6 3
1.7.11 Observe the CBS Inequality in R3 given the vectors → −x = (x1 , x2 , x3 ), →

−
y =
(y1 , y2 , y3 ) let θ be the angle between them. Then
− → È È
→
−
x •→−y = → x −
y cos θ =⇒ |x1 y1 + x2 y2 + x3 y3 | ≤ x21 + x22 + x23 y12 + y22 + y32 .
Now take x1 = a2 , x2 = b2 , x3 = c2 and y1 = y2 = y3 = 1. This gives (since squares are

positive, we don’t need the absolute values)
È È
|x1 y1 +x2 y2 +x3 y3 | ≤ x21 + x22 + x23 y12 + y22 + y32 =⇒ (a2 +b2 +c2 )2 ≤ (a4 +b4 +c4 )(3),
which proves the claim at once.
1.7.12 First observe that

È
S(a, b, c) = s(s − a)(s − b)(s − c)
È
1
= (a + b + c)(b + c − a)(c + a − b)(a + b − c)
4È
1
= (a2 + b2 + c2 )2 − 2(a4 + b4 + c4 )
4
Hence r
S(a, b, c) 1 a 4 + b4 + c 4
= 1−2 ,
a 2 + b2 + c 2 4 (a2 + b2 + c2 )2
a 4 + b4 + c 4
and thus maximising f is equivalent to minimising 2 . From problem
(a2 + b2 + c2 )2
1.7.11,
a 4 + b4 + c 4 1
≥ ,
(a2 + b2 + c2 )2 3
which in turn gives É √
S(a, b, c) 1 2 1 3
≤ 1− = √ = ,
a 2 + b2 + c 2 4 3 4 3 12
the desired maximum.

Appendix A
1
1.7.15 x + y + z = 1. .
6
→
− −
1.7.16 Assume contrariwise that →−
a, b, → c are three unit vectors in R3 such that the
2π →
− 1 →− − 1
angle between any two of them is > . Then →
−a • b < − , b •→ c < − , and →
−c •→
−
a <
3 2 2
1
− . Thus
2 2
→ →
− − − 2 →
− 2 − 2
− →
a + b + c = → a + b + →
c
→
− →
− −
+2→−
a • b + 2 b •→c + 2→ −
c •→
−
a
< 1+1+1−1−1−1
= 0,
which is impossible, since a norm of vectors is always ≥ 0.
→
− •→
t − s →− →
− →
−
1.7.17 Let projts = s be the projection of t over → −s 6= 0 . Let x0 be the point
(||s||)2
−→ →
−
on the plane that is nearest to b. Then bx0 = → −
x0 − b is orthogonal to the plane, and the
distance we seek is

→ →
− − →
− −
(−
r0 − b )•→ |(→
−
r0 − b )•→
→
− →
−
r0 − b n→−
n|
||projn || = → n = .
−
n
2
→−n
Since R0 is on the plane, →

−
r0 •→
−
n =→
−
a •→
−
n , and so
→
− − →
− − →
− −
→
− →
− |→
−
r0 •→
−
n − b •→ n| |→
−
a •→
−
n − b •→ n| |(→
−
a − b )•→ n|
||projnr0 − b || = → = → = → ,
n |
− n
− n
−
as we wanted to shew.
1.7.18 There are 7 vertices (V0 = (0, 0, 0), V1 = (11, 0, 0), V2 = (0, 9, 0), V3 = (0, 0, 8),
V4 = (0, 3, 8), V5 = (9, 0, 2), V6 = (4, 7, 0)) and 11 edges (V0 V1 , V0 V2 , V0 V3 , V1 V5 , V1 V6 ,
V2 V4 , V2 V6 , V3 V4 , V3 V5 , V4 V5 , and V4 V6 ).
x y
Figure A.11: Problem 1.7.18.
→
−
1.8.2 We have →
−
x ×→−
x = −→
−
x ×→
−
x by letting →
−
y = →
−
x in ??. Thus 2→
−
x ×→
−
x = 0 and
→
−
hence →
−
x ×→ −
x = 0.

Answers and Hints
1.8.3 One has

→
− →
− →
− →
− →
−
(b −→ −
a ) × (→
−
c −→
−
a ) = 0 =⇒ →
−
a × b + b ×→
−
c +→
−
c ×→
−
a = 0
This gives
→
− →
− →
− →
− →
− →
− →
− →
−
b ×→−c = −(→−a × b +→−c ×→ −a ) = −( j + k + i − j ) = − i − k .
2 3 2 3 2 3
1 1 −1
6 7 6 7 6 7
1.8.4 The vector 415 × 415 = 4 1 5 is normal to the plane. The plane has thus equation
1 0 0
2 3 2 3
x −1
6 7 6 7
4y + 15 • 4 1 5 = 0 =⇒ −x + y + 1 = 0 =⇒ x − y = 1,
z−2 0
as obtained before.
1.8.5 The vectors 2 3 2 3

a − (−a) 2a
6 7 6 7
4 0 − 1 5 = 4−15
a−0 a
and 2 3 2 3
0 − (−a) a
6 7 6 7
4 1−1 5=405
2a − 0 2a
lie on the plane. A vector normal to the plane is
2 3 2 3 2 3
2a a −2a
6 7 6 7 6 27
4−15 × 4 0 5 = 4−3a 5 .
a 2a a
The equation of the plane is thus given by

2 3 2 3
−2a x−a
6 27 6 7
4−3a 5 • 4 y − 0 5 = 0,
a z−a
that is,
2ax + 3a2 y − az = a2 .
→
−v ×→−
w →
−v ×→−
w
1.8.6 Either of →
− →
− or − →− →
− will do. Now
|| v × w || || v × w ||
→
− →
− →
− →
− →
−
v ×→
−
w = (−a j + a k ) × ( i + a j )
→
− →
− →
− →
− →
− →
− →
− →
−
= −a( j × i ) − a2 ( j × j ) + a( k × i ) + a2 ( k × j )
→
− →
− →
−
= a k + a j − a2 i
Ǒ
−a2
= a ,
a

Appendix A
p p
and ||→
−
v ×→
−
w || = a4 + a2 + a2 = 2a2 + a4 . Hence we may take either
Ǒ
−a2
1
√ 2 a
2a + a4
a
or Ǒ
−a2
1
−√ a .
2a2 + a4
a
1.8.7 From Theorem ?? we have

→
− →
− →
− →
− −
a ×(b ×→ −
c ) = (→
−
a •→
−
c ) b − (→
−
a • b )→
c,
→
− →
− − → →
− − →
b × (→
−
c ×→a ) = ( b •→
− a )−
c − ( b •→
c )−
a,
→
− →
− →
− →
−
c × (→
−
a × b ) = (→
−c • b )→
−
a − (→
−c •→
−
a)b,
and adding yields the result.
1.8.8 By Lagrange’s Identity,
→
− − 2 →
− 2 →
− →
−
||→
− x i − (→
x × i ||2 = → −
x • i )2 = 1 − (→
−
x • i )2 ,
→
− − 2 →
− 2 →
− →
−
x × k ||2 = →
||→
− x j − (→ −
x • j )2 = 1 − (→
−
x • j )2 ,
→
− − 2 →
− 2 →
− →
−
x × j ||2 = →
||→
− x k − (→ −
x • k )2 = 1 − (→
−
x • k )2 ,
→
− →
− →
− − 2
and since (→
−
x • i )2 +(→
−
x • j )2 +(→x • k )2 = →
− x = 1, the desired sum equals 3− 1 = 2.
1.8.9
→
− →
− →
− →
− − →
− →
− − → →
− − → →
− −
a ×(→
−
x × b ) = b ×(→
−
x ×→
−
a ) ⇐⇒ (→
−
a • b )→
x −(→
−
a •→
−
x ) b = ( b •→
a )−
x −( b •→
x )−
a ⇐⇒ →
−
a •→
−
x = b •→
x = 0.
→
−
The answer is thus {→
−
x :→
−
x ∈ R→
−
a × b }.
1.8.12
→
− − →
−
→
− (→
−
a • b )→
a + 6 b + 2→ −
a ×→−
c
x = →

12 + 2 a − 2
→
−
→
− (→
−
a •→
−c )→
−
a + 6→−c + 3→ −
a × b
y = →
18 + 3− a
2
1.8.13 First observe that

→
−
x • (→
−
y ×→
−
z ) = (→
−
x ×→
−
y)•→
−
z.
This is so because both sides give the volume of the parallelogram spanned by →
−
x,→
−
y,→
−
z.
→
− →
− →
− →
− →
− →
− →
−
Now, putting x = a × b , y = c and z = d we gather that
→
− →
− →
− →
−
(→
−
a × b ) • (→
−
c × d) = ((→
−
a × b)×→
−
c)• d.

Answers and Hints
Now, again,
→
− →
− →
− − →
− →
− →
− −
(→
−
a × b )× →
−
c = −→
−
c × (→
−
a × b ) = −((→
−
c • b )→
a − (→
−
c •→
−
a ) b ) = (→
−
c •→
−
a ) b − (→
−
c • b )→
a.
This gives
→
− →
− →
− →
− − →
− →
− → − →
− − •→ −
((→
−
a × b )× →
−
c ) • d = ((→
−
c •→
−
a ) b − (→
−
c • b )→
a ) • d = (→
−
c •→
−
a )( b • d ) − (→
−
c • b )(→
a d ),
proving the identity.
1.8.14 By problem 1.8.13,
(→
−
x ×→
−
y ) • (→
−
u ×→
−
v ) = (→
−
x •→
−
u ) • (→
−
y •→
−
v ) − (→
−
x •→
−
v ) • (→
−
y •→
−
u ).
Using this three times:

→
− →
− →
− − →
− →
− → − →
−
(b ×→−
c ) • (→
−
a × d) = ( b •→a ) • (→
−c • d ) − ( b • d ) • (→
−c•d)
→
− →
− →
− →
− →
− →
−
(→
−
c ×→−
a)•(b × d) = (→
−c • b ) • (→
−a • d ) − (→
−c • d ) • (→
−a•b)
→
− →
− →
− →
− →
− →
−
(→
−
a × b ) • (→
−
c × d) = (→
−a •→
−c ) • ( b • d ) − (→
−a • d ) • ( b •→
−
c)
Adding these three equalities, and using the fact that the dot product is commutative, we
see that all the terms on the dextral side cancel out and we obtain 0, as required.
1.8.15
1. We have
2 3 2 3 2 3
6 0 12
−→ 6 7 −→ 6 7 −→ −→ →
− →
− →
− →
− →
− →
− →
− 6 7
CA = 4 0 5 , CB = 4 4 5 =⇒ CA×CB = (6 i −3 k )×(4 j −3 k ) = 24 k +18 j +12 i = 4185 .
−3 −3 24
2. We have p √ √
−→ −→
CA × CB = 122 + 182 + 242 = 1044 = 6 29.
3. The desired line has equation

Ǒ Ǒ 2 3
x 0 6
6 7
y = 0 + t 4 0 5 =⇒ x = 6t, y = 0, z = 3 − 3t.
z 3 −3
4. The desired line has equation

Ǒ Ǒ 2 3
x 3 0
6 7
y = 0 + s 4 0 5 =⇒ x = 3, y = 0, z = −3s.
z 0 −3
5. From the preceding items, the line LC A is x = 6t, y = 0, z = 3 − 3t and the line
LD E is x = 3, y = 0, z = −3s. If the line intersect then 6t = 3,
0 = 0, 3 − 3t =
1 1 3
−3s gives t = and s = − . The point of intersection is thus 3, 0, . item The
2 2 2
area is √ √
1 −→ −→ 1
CA × CB = · 6 29 = 3 29.
2 2

Appendix A
6. Observe that
Ǒ Ǒ Ǒ Ǒ
3 3 x 0
P = 0 , Q= y , R= 3 , S = 3 .
z 0 0 z
Since all this points lie on the plane 2x + 3y + 4z = 12, we find

Ǒ
3
2(3) + 3(0) + 4z = 12 =⇒ P = 0 ,
3
2
Ǒ
3
2(3) + 3y + 4(0) = 12 =⇒ Q = 2 ,
0
3Ǒ
2
2x + 3(3) + 4(0) = 12 =⇒ R = 3 ,
0
Ǒ
0
2(0) + 3(3) + 4z = 12 =⇒ S = 3 .
3
4
7. A possible way is to decompose the pentagon into three triangles, say △CP Q,
△CQR and △CRS and find their areas. Another way would be to subtract from the
area of △ABC the areas of △AP Q and △RSB. I will follow the second approach.
Let [△AP Q], [△RSB] denote the areas of △AP Q and △RSB respectively. Then
2 3 2 3 2 3
3 0 −3 É

1 −→ −→ 1 6 7 6 7 1 6 9 7 1 81 3√
[△AP Q] = PA × PQ = 4 0 5 × 4 2 5 = 4 5 = 9+ + 36 = 29,
2 2 3 3 2 2 2 4 4
− 6
2 2
2 2 3
3
3 2 3 3
0 É
6 4 7
1 − → 1 6 2 7 6 3 √
1 5 = 6 7 =
7
→ − 1 9 1 9 81 9
[△RSB] = SR × SB = 6 0 75×4 + + = 29.
2 2 4 3 2 4 8 5 2 16 64 4 16
3 3
− −
4 4 2
Hence the area of the pentagon is
√ 3√ 3 √ 33 √
3 29 − 29 − 29 = 29.
4 16 16
1.9.2 The assertion is trivial for n = 1. Assume its truth for n − 1, that is, assume
An−1 = 3n−2 A. Observe that
2 32 3 2 3
1 1 1 1 1 1 3 3 3
6 76 7 6 7
A2 = 41 1 15 41 1 15 = 43 3 35 = 3A.
1 1 1 1 1 1 3 3 3

Answers and Hints
Now
An = AAn−1 = A(3n−2 A) = 3n−2 A2 = 3n−2 3A = 3n−1 A,
and so the assertion is proved by induction.
1.9.3 First, we will prove that
2 3
1 2 3 4 ... n−1 n
60 n−2 n − 17
6 1 2 3 ... 7
6 7
A2 = 6
6
0 0 1 2 ... n−3 n − 27 .
7
6 .. .. .. 7
4. . . ... . . . ... ... 5
0 0 0 0 ... 0 1
Observe that A = [aij ], where aij = 1 for i ≤ j and aij = 0 for i > j.
Put A2 = [bij ]. Assume first that i ≤ j. Then

X
n
X
j
bij = aik akj = 1 = j − i + 1.

k=1 k=i
Assume now that i > j. Then

X
n
X
n
bij = aik akj = 0 = 0,

k=1 k=1
proving the first statement. Now, we will prove that

2 3
(n − 1)n n(n + 1)
1 3 6 10 ...
6 2 2 7
6 (n − 2)(n − 1) (n − 1)n 7
60 1 3 6 ... 7
6 2 2 7
3 6 (n − 3)(n − 2) (n − 2)(n − 1) 7
A =6 0 0 1 3 ... 7.
6 2 2 7
6 .. .. .. 7
6 7
4. . . . . . . . . ... ... 5
0 0 0 0 ... 0 1
For the second part, you need to know how to sum arithmetic progressions. In our case,
we need to know how to sum (assume i ≤ j),
X
j
X
j
S1 = a, S2 = k.
k=i k=i
The first sum is trivial: there are j − i + 1 integers in the interval [i; j], and hence
X
j
X
j
S1 = a = S1 = a 1 = a(j − i + 1).
k=i k=i
For the second sum, we use Gauß trick: summing the sum forwards is the same as
summing the sum backwards, and so, adding the first two rows below,
S2 = i + i+1 + i+2 + ··· + j−1 + j

S2 = j + j−1 + j−2 + ··· + i−1 + i
,
2S2 = (i + j) + (i + j) + (i + j) + ··· + (i + j) + (i + j)
2S2 = (i + j)(j − i + 1) ···

Appendix A
(i + j)(j − i + 1)
which gives S2 = .
2
Put now A3 = [cij ]. Assume first that i ≤ j. Since A3 = A2 A,

X
n
cij = bik akj

k=1
Xj
= (k − i + 1)
k=i
X
j
X
j
X
j
= k− i+ 1
k=i k=i k=i
(j + i)(j − i + 1)
= − i(j − i + 1) + (j − i + 1)
2
(j − i + 1)(j − i + 2)
= .
2
Assume now that i > j. Then
X
n
X
n
cij = bik akj = 0 = 0.

k=1 k=1
This finishes the proof.
1.9.4 For the first part, observe that

2 32 3
1 0 a 1 0 b
6 a2 7 6 b2 7
m(a)m(b) = 6−a 1 7 6
− 5 4−b 1 − 7
4 2 25
0 0 1 0 0 1
2 3
1 0 a+b
6 a2 b2 7
= 6−a − b 1 − − + ab7
4 2 2 5
0 0 1
2 3
1 0 a+b
6 (a + b)2 7
= 6−(a + b) 1 − 7
4 2 5
0 0 1
= m(a + b)
For the second part, observe that using the preceding part of the problem,
2 3
1 0 0
6 02 7
m(a)m(−a) = m(a − a) = m(0) = 6 7
4−0 1 − 2 5 = I3 ,
0 0 1
giving the result.

a π
1.11.1 √ , .
2 4

Answers and Hints
a
1.11.3 √
3
1.12.1 Consider a right triangle △ABC rectangle at A with legs of length CA = h and
AB = r, as in figure A.12. The cone is generated when the triangle rotates about CA.
The gyrating curve is thep hypotenuse, whose centroid is its centre. The length of the
generating curve
r is thus r 2 + h2 and the length of curve described by the centre of
p
gravity is 2π = πr. The lateral area is thus πr r 2 + h2 .
2
b
C
b
r/2 b
′
b b
G
h/3 G B
b b
Figure A.12: Generating a cone.
rh
To find the volume, we gyrate the whole right triangle, whose area is . We need
2
to find the centroid of the triangle. But from example 17, we know that the centroid G
of the triangle is is two thirds of the way from A to the midpoint of BC. If G′ is the
perpendicular projection of G onto [CA], then this means that G′ is at a vertical height
h 2 h GG′ h/3 r
of · = . By similar triangles = =⇒ GG′ = . Hence, the length of the
2 3 3 r h 3
2
curve described by the centre of gravity of the triangle is πr. The volume of the cone is
3
2 rh π
thus πr · = r 2 h.
3 2 3
−−−→ −−−→
1.14.1 Find a vector → −a mutually perpendicular to V1 V2 and V1 V3 and another vector
→
− −−−→ −−−→ 1
and a vector b mutually perpendicular to V1 V3 and V1 V4 . Then shew that cos θ = ,
3
→
−
where θ is the angle between → −a and b .
Ǒ
x
1.15.1 Let y be a point on S. If this point were on the xz plane, it would be on the
z
1p
ellipse, and its distance to the axis of rotation would be |x| = 1 − z 2 . Anywhere else,
2

Appendix A
Ǒ Ǒ
x 0
the distance from y to the z-axis is the distance of this point to the point 0 :
z z
p
x2 + y 2 . This distance is the same as the length of the segment on the xz-plane going
from the z-axis. We thus have
p 1p
x2 + y 2 = 1 − z 2,
2
or
4x2 + 4y 2 + z 2 = 1.
Ǒ
x
1.15.2 Let y be a point on S. If this point were on the xy plane, it would be on the
z
1
line, and its distance to the axis of rotation would be |x| = |1 − 4y|. Anywhere else, the
Ǒ 3 Ǒ Ǒ
x x 0
distance of y to the axis of rotation is the same as the distance of y to y ,
z z 0
p
that is x2 + z2. We must have
p 1
x2 + z 2 = |1 − 4y|,
3
which is to say
9x2 + 9z 2 − 16y 2 + 8y − 1 = 0.
1.15.3 A spiral staircase.
1.15.4 A spiral staircase.
1.15.6 The planes A : x + z = 0 and B : y = 0 are secant. The surface has equation of
2 2
the form f (A, B) = eA +B − A = 0, and it is thus a cylinder. The directrix has direction
→
− →
−
i − k.
1.15.7 Rearranging,
1
(x2 + y 2 + z 2 )2 − ((x + y + z)2 − (x2 + y 2 + z 2 )) − 1 = 0,
2
and so we may take A : x + y + z = 0, Σ : x2 + y 2 + z 2 = 0, shewing that the surface is
→
− →
− →
−
of revolution. Its axis is the line in the direction i + j + k .
1.15.8 Considering the planes A : x − y = 0, B : y − z = 0, the equation takes the form

1 1 1
f (A, B) = + − − 1 = 0,
A B A+B
thus the equation represents a cylinder. To2find
3 its directrix,
2 3 we find the intersection of
x 1
6 7 6 7
the planes x = y and y = z. This gives 4y 5 = t 415. The direction vector is thus
z 1
→
− →
− →
−
i + j + k.

Answers and Hints
1.15.9 Rearranging,
(x + y + z)2 − (x2 + y 2 + z 2 ) + 2(x + y + z) + 2 = 0,
so we may take A : x + y + z = 0, Σ : x2 + y 2 + z 2 = 0 as our plane and sphere. The
→
− →
− →
−
axis of revolution is then in the direction of i + j + k .
1.15.10 After rearranging, we obtain

(z − 1)2 − xy = 0,
or
x y
− + 1 = 0.
z−1z−1
Considering the planes
A : x = 0, B : y = 0, C : z = 1,
we see that our surface is a cone, with apex at (0, 0, 1).
1.15.11 The largest circle has radius b. Parallel cross sections of the ellipsoid are sim-
ilar ellipses, hence we may increase the size of these by moving towards the centre of
the ellipse. Every plane through the origin which makes a circular cross section must
intersect the yz-plane, and the diameter of any such cross section must be a diameter of
y2 z2
the ellipse x = 0, 2 + 2 = 1. Therefore, the radius of the circle is at most b. Arguing
b c
similarly on the xy-plane shews that the radius of the circle is at least b. To shew that
circular cross section of radius b actually exist, one may verify that the two planes given
by a2 (b2 − c2 )z 2 = c2 (a2 − b2 )x2 give circular cross sections of radius b.
1.15.12 Any hyperboloid oriented like the one on the figure has an equation of the form
z2 x2 y2
= + − 1.
c2 a2 b2
When z = 0 we must have
1
4x2 + y 2 = 1 =⇒ a = , b = 1.
2
Thus
z2
= 4x2 + y 2 − 1.
c2
Hence, letting z = ±2,
4 1 y2 1 1 3
2
= 4x2 + y 2 − 1 =⇒ 2 = x2 + − = 1− = ,
c c 4 4 4 4
y2
since at z = ±2, x2 + = 1. The equation is thus
4
3z 2
= 4x2 + y 2 − 1.
4
1.16.1 The arc length element is
È p
(dx)2 + (dy)2 + (dz)2 = 4t2 + 36t + 81 dt = (2t + 9) dt.
We need t = 1 to t = 4. The desired length is
Z 4 4

(2t + 9) dt = (t2 + 9t) = (16 + 36) − (1 + 9) = 42.
1 1

Appendix A
1.16.2 Observe that z = 1 + x2 + y 2 is a paraboloid opening up, with vertex (lowest point)
at (0, 0, 1). On the other hand, z = 3 − x2 − y 2 is another paraboloid opening down, with
highest point at (0, 0, 3). Adding the equations we obtain
2z = z + z = (1 + x2 + y 2 ) + (3 − x2 − y 2 ) = 4 =⇒ 2z = 4 =⇒ z = 2,
so they intersect at the plane z = 2. Subtracting the equations,
(1 + x2 + y 2 ) − (3 − x2 − y 2 ) = z − z = 0 =⇒ 2x2 + 2y 2 − 2 = 0 =⇒ x2 + y 2 = 1,
so they intersect at the circle x2 +y 2 = 1, z = 2. Since they meet at the circle x2 +y 2 = 1,

we may parametrise this circle as x = cos t, y = sin t, t ∈ [0; 2π], z = 2.
1.16.3 Let →
−
r (t) lie on the plane ax + by + cz = d. Then we must have
t4 t3 t2
a +b +c = d =⇒ (at4 +bt3 +ct2 ) = d(1+t2 ) =⇒ at4 +bt3 +(c−d)t2 −d = 0,
1 + t2 1 + t2 1 + t2
which means that if → −r (t) is on the plane ax + by + cz = d, then t must satisfy the quartic
polynomial p(t) = at4 + bt3 + (c − d)t2 − d = 0. Hence, the tk are coplanar if and only
if they are roots of p(t). Since the coefficient of t in this polynomial is 0, then the sum of
the roots of p(t) taken three at a time is 0, that is,
t1 t2 t3 + t1 t2 t4 + t1 t3 t4 + t2 t3 t4 1 1 1 1
t1 t2 t3 +t1 t2 t4 +t1 t3 t4 +t2 t3 t4 = 0 =⇒ = 0 =⇒ + + + = 0,
t1 t2 t3 t4 t1 t2 t3 t4
as required.
1.16.4 Observe that in this problem you are only parametrising the ellipsoid! The tricky
part is to figure out the bounds in your parameters so that only the part above the plane
x + y + z = 0 is described. A common parametrisation found was:
x = cos θ sin φ, y = 3 sin θ sin φ, z = cos φ.
The projection of the plane x + y + z = 0 onto the xy-plane is the line y = −x. To
be “above” this line, the angle2θ,3measured from the positive x-axis needs to be in the
1
π 3π 6 7
interval − ≤ θ ≤ . Since 415 is normal to the plane x + y + z = 0, the plane makes
4 4
1
π
an angle of with the z-axis. Recall that φ is measured from φ = 0 (positive z-axis) to
4
3π
φ = π (negative z-axis). Hence to be above the plane we need 0 ≤ φ ≤ .
4
1.16.6
2 3
−2a
6 7
1. 4a2 − 15
a2 + 1
2. x2 + y 2 = c2 + 1
Z 1
4π
3. π (c2 + 1)dc =
0 3
1.17.1

Answers and Hints
1. Put f : R → R, f (x) = ex−1 − x. Clearly f (1) = e0 − 1 = 0. Now,

f ′ (x) = ex−1 − 1,
f ′′ (x) = ex−1 .
If f ′ (x) = 0 then ex−1 = 1 implying that x = 1. Thus f has a single minimum
point at x = 1. Thus for all real numbers x
0 = f (1) ≤ f (x) = ex−1 − x,
which gives the desired result.
2. Easy Algebra!
3. Easy Algebra!
4. By the preceding results, we have
A1 ≤ exp(A1 − 1),
A2 ≤ exp(A2 − 1),
..
.
An ≤ exp(An − 1).
Since all the quantities involved are non-negative, we may multiply all these inequal-
ities together, to obtain,
A1 A2 · · · An ≤ exp(A1 + A2 + · · · + An − n).
In view of the observations above, the preceding inequality is equivalent to
nn Gn
≤ exp(n − n) = e0 = 1.
(a1 + a2 + · · · + an )n
We deduce that n
a1 + a2 + · · · + an
Gn ≤ ,
n
which is equivalent to
a1 + a2 + · · · + an
(a1 a2 · · · an )1/n ≤ .
n
Now, for equality to occur, we need each of the inequalities Ak ≤ exp(Ak − 1) to
hold. This occurs, in view of the preceding lemma, if and only if Ak = 1, ∀k, which
translates into a1 = a2 = . . . = an . This completes the proof.
1.17.2 By CBS,
2
1 1 1 X
n
√ 1
(x1 + x2 + . . . + xn ) + +... + ≥ xi √
x1 x2 xn xi
i=1
= n2 .
1.17.3 By CBS,

(a + b + c + d)2 ≤ (1 + 1 + 1 + 1) a2 + b2 + c2 + d2 = 4 a 2 + b2 + c 2 + d 2 .
Hence,
16
(8 − e)2 ≤ 4 16 − e2 ⇐⇒ e (5e − 16) ≤ 0 ⇐⇒ 0 ≤ e ≤ .
5
16 6
The maximum value e = is reached when a = b = c = d = .
5 5

Appendix A
1.17.4 Observe that 96 · 216 = 1442 and by CBS,

n n
Xn
X X
2 3
ak ≤ ak ak .
k=1 k=1 k=1
As there is equality,
(a1 , a2 , . . . , an ) = t(a31 , a32 , . . . , a3n )
for some real number t. Hence a1 = a2 = . . . = an = a, from where na = 96, na2 = 144
3
gives a = y n = 32.
2
1.17.5 Applying the AM-GM inequality, for 1, 2, . . . , n:
1 +2 +··· + n n+1
n!1/n = (1 · 2 · · · n)1/n < = ,
n 2
with strict inequality for n > 1.
1.17.6 If x ∈ [−a; a], then a + x ≥ 0 and a − x ≥ 0, and thus we may use AM-GM with
a+x a−x
n = 8, a1 = a2 = · · · = a5 = and a6 = a7 = a8 = . We deduce that
5 3
a + x
a − x 8
5 3 5 +3 a 8
a+x a−x 5 3
≤ = ,
5 3 8 4
from where
55 33 a8
f (x) ≤ ,
48
a+x a−x
with equality if and only if = .
5 3
1.17.7 Applying AM-GM to the set of n + 1 numbers
1 1 1
1, 1 + ,1 + ,...,1 + ,
n n n
has arithmetic mean
1
1+
n+1
and geometric mean

1 n/(n+1)
1+ .
n
Therefore,

1 1 n/(n+1)
1+ > 1+ ,
n+1 n
that is n+1
1 1 n
1+ > 1+ ,
n+1 n
which means
xn+1 > xn ,
giving the assertion.

Answers and Hints
2.1.2 Since polynomials are continuous functions and the image of a connected set is
connected for a continuous function, the image must be an interval of some sort. If the
image were a finite interval, then f (x, kx) would be bounded for every constant k, and so
the image would just be the point f (0, 0). The possibilities are thus
1. a single point (take for example, p(x, y) = 0),
2. a semi-infinite interval with an endpoint (take for example p(x, y) = x2 whose image
is [0; +∞[),
3. a semi-infinite interval with no endpoint (take for example p(x, y) = (xy − 1)2 + x2
whose image is ]0; +∞[),
4. all real numbers (take for example p(x, y) = x).
2.3.4 0
2.3.5 2
2.3.6 c = 0.
2.3.7 0
2.3.10 By AM-GM,
x2 y 2 z 2 (x2 + y 2 + z 2 )3 (x2 + y 2 + z 2 )2
≤ = →0
x2 +y +z2 2 2 2
27(x + y + z ) 2 27
as (x, y, z) → (0, 0, 0).
2.4.1 We have
→
− →
− →
−
F (→
−
x + h ) − F (→
−
x) = (→
−x + h ) × L(→
−x + h)−→ −x × L(→−
x)
→
− →
−
= ( x + h ) × (L( x ) + L( h )) − x × L(→
→
− →
− →
− −
x)
→
− →
− →
− →
− →
−
= x × L( h ) + h × L(→−x ) + h × L( h )

→
− →
− →
− →
− →
−
Now, we will prove that || h × L( h )|| = o h as h → 0 . For let
→
− X
n
h = hk →
−
e k,
k=1
where the →
−
e k are the standard basis for Rn . Then
→
− X
n
L( h ) = hk L(→
−
e k ),
k=1
and hence by the triangle inequality, and by the Cauchy-Bunyakovsky-Schwarz inequal-

ity,
→
− Xn
||L( h )|| ≤ |hk |||L(→

−
e k )||
1/2
k=1
1/2
X
n
X
n
≤ |hk | 2
||L(→
−
e k )||2
k=1 k=1
X n
→
−
= h ( ||L(→
−
e k )||2 )1/2 ,
k=1

Appendix A
whence, again by the Cauchy-Bunyakovsky-Schwarz Inequality,

→
− →
− →
− →
− →
− →−
|| h × L( h )|| ≤ || h ||||L( h )| ≤ || h ||2 |||L(→
−
e k )||2 )1/2 = o || h || ,
as it was to be shewn.
→
− t
2.4.2 Assume that →
− 6
x = 0 . We use the fact that (1 + t)1/2 = 1 + + o (t) as t → 0. We
2
have
→
− →
− −
f (→
−
x + h ) − f (→
−
x ) = ||→ x + h || − →
− x
È −
→
− →
−
= (→
−x + h )•(→−x + h ) − → x
É
→ 2 →
− →
− 2 −
= −
x + 2→−x • h + h − → x
2
→
− →
−
2→
−
x • h + h
= É 2 .
→ 2 →
− →−
−x + 2→x • h + h + →
− x
−
→
− →
−
As h → 0 , É
→ 2 2 −
− →
− →
−
x + 2→
−
x • h + h + →
−
x → 2→
x .
2
→
− →
− →
− →
−
Since h = o h as h → 0 , we have
2
→
− →
−
2→
−
x • h + h →
− →
−

x•h
→
−
É 2 → + o h ,
→ →
− →
− →−
−
x + 2→
2 −x • h + h + →
x
− h
proving the first assertion.

To prove the second assertion, assume that there is a linear transformation D0 (f ) =
L, L : Rn → R such that

→
− →
− →
− →
− →
−
||f ( 0 + h ) − f ( 0 ) − L( h )|| = o h ,

→
− →
− →
−
as h → 0. Recall that by theorem ??, L( 0 ) = 0 , and so by example 169,
→
−
→ D0 (L)( 0 ) = 0 , as h → 0.
→
− →
− →
− L( h ) →
− →
− →
−
D0 (L)( 0 ) = L( 0 ) = 0 . This implies that →
−
h

→
− →
−
→
−
Since f ( 0 ) = ||0|| = 0, f ( h ) = h this would imply that

→
− −
→ →
−
h − L( h ) = o h ,
or
−
→
L( h )
1 − = o (1) .
→
−
h
→
− →
− →
− →
−
But the sinistral side → 1 as h → 0 , and the dextral side → 0 as h → 0 . This is a
→
−
contradiction, and so, such linear transformation L does not exist at the point 0 .

Answers and Hints
2.5.1 We have
2
∂f 2 r −r 2 /4t r 2 tn−2 2
= ntn−1 e−r /4t + tn e = nt n−1
+ e−r /4t ,
∂t 4t2 4

∂f 2r 2 1 2
r2 = r 2 − rtn e−r /4t = − r 3 tn−1 e−r /4t ,
∂r 4t 2

1 ∂ 2 ∂f 1 ∂ 1 3 n−1 −r 2 /4t
r = − r t e
r 2 ∂r ∂r
r 2 ∂r 2
1 3 2 n−1 −r 2 /4t 1 4 n−1 −r 2 /4t
= − r t e + r t e

r 2 2 4t
3 1 2
= − tn−1 + r 2 tn−2 e−r /4t .
2 4
We conclude that
r 2 tn−2 3 1 3
ntn−1 + = − tn−1 + r 2 tn−2 =⇒ n = − .
4 2 4 2
2.5.2 Observe that ¨
x if x ≤ y 2
f (x, y) = 2
y if x > y 2
Hence ¨
∂ 1 if x ≤ y 2
f (x, y) =
∂x 0 if x > y 2
and ¨
∂ 0 if x ≤ y 2
f (x, y) =
∂y 2y if x > y 2
2.5.3 Observe that

3 ′ y2 2xy ′ 1 −1 2
g(1, 0, 1) = , f (x, y) = , g (x, y) = ,
0 2xy x2 y x 0
and hence

′ 1 −1 2 ′ ′ 0 0
g (1, 0, 1) = , f (g(1, 0, 1)) = f (3, 0) = .
0 1 0 0 9
This gives, via the Chain-Rule,

0 0 1 −1 2 0 0 0
(f ◦ g)′ (1, 0, 1) = f ′ (g(1, 0, 1))g ′ (1, 0, 1) = = .
0 9 0 1 0 0 9 0
The composition g ◦ f is undefined. For, the output of f is R2 , but the input of g is in R3 .

0
2.5.4 Since f (0, 1) = , the Chain Rule gives
1
2 3 2 3
1 −1 0 −1
6 7 1 0 6 7
(g◦f )′ (0, 1) = (g ′ (f (0, 1)))(f ′ (0, 1)) = (g ′ (0, 1))(f ′ (0, 1)) = 40 0 5 = 40 0 5
1 1
1 1 2 1

Appendix A
2.5.5 We have
∂f
(x, y) = 2xyg(x2 y),
∂x
and
∂f
(x, y) = x2 g(x2 y).
∂y
1 b
2.5.6 Differentiating both sides with respect to the parameter a, the integral is arctan +
2a3 a
b
2a2 (a2 + b2 )
2.5.10 We have
∂ ∂ ∂ ∂z ∂z
(x + z)2 + (y + z)2 = 8 =⇒ 2(1 + )(x + z) + 2 (y + z) = 0.
∂x ∂x ∂x ∂x ∂x
At (1, 1, 1) the last equation becomes
∂z ∂z ∂z 1
)+4
4(1 + = 0 =⇒ =− .
∂x ∂x ∂x 2
2 3 2 3
ey z e
6 7 6 7
2.6.1 ∇f (x, y, z) = 4xzey z 5 =⇒ (∇f )(2, 1, 1) = 42e5.
xyey z 2e
2 3 2 3
0 0
6 7 6 7
2.6.2 (∇ × f )(x, y, z) = 4 x 5 =⇒ (∇ × f )(2, 1, 1) = 4 2 5.
yexy e2
2 3
1
6 7
2.6.4 The vector 4−75 is perpendicular to the plane. Put f (x, y, z) = x2 + y 2 − 5xy +
0
2 3
2x − 5y + z
6 7
xz − yz + 3. Then (∇f )(x, y, z) = 42y − 5x − z 5. Observe that ∇f (x, y, z) is parallel
x−y
2 3
1
6 7
to the vector 4−75, and hence there exists a constant a such that
0
2 3 2 3
2x − 5y + z 1
6 7 6 7
42y − 5x − z 5 = a 4−75 =⇒ x = a, y = a, z = 4a.
x−y 0
Since the point is on the plane
x − 7y = −6 =⇒ a − 7a = −6 =⇒ a = 1.
Thus x = y = 1 and z = 4.

Answers and Hints
2.6.7 Observe that
f (0, 0) = 1, fx (x, y) = (cos 2y)ex cos 2y =⇒ fx (0, 0) = 1,
fy (x, y) = −2x sin 2yex cos 2y =⇒ fy (0, 0) = 0.

Hence
f (x, y) ≈ f (0, 0) + fx (0, 0)(x − 0) + fy (0, 0)(y − 0) =⇒ f (x, y) ≈ 1 + x.
This gives f (0.1, −0.2) ≈ 1 + 0.1 = 1.1.
2.6.8 This is essentially the product rule: duv = udv +vdu, where ∇ acts the differential
operator and × is the product. Recall that when we defined the volume of a parallelepiped
→
− −
spanned by the vectors → −a, b,→ c , we saw that
→
− →
− →
−
a •(b ×→
−
c ) = (→
−
a × b)•→
−
c.
Treating ∇ = ∇→ →
− →
−
u + ∇→
− −v as a vector, first keeping v constant and then keeping u
constant we then see that
→
− →
− →
− →
− →
− →
− →
− →
− →
− →
− →
− →
−
∇→
u • ( u × v ) = (∇ × u ) • v ,
− ∇→
v • ( u × v ) = −∇ • ( v × u ) = −( ∇ × v ) • u .
−
Thus
→
− → − →
− → − →
− → − → − →
− → − → −
∇•(u×v) = (∇→ v )•(u×v) = ∇→
u +∇→
− − − v •( u × v ) = ( ∇ × u )• v −( ∇ × v )• u .
u •( u × v )+∇→
−
π π
2.6.11 An angle of with the x-axis and with the y-axis.
6 3
2.8.6 We have
2 3 2 3
2x − y + 1 0
6 7 6 7 2 1
∇f (x, y, z) = 4 2y − x 5 = 405 =⇒ x = − , y = − , z = 1,
3 3
2z − 2 0

2 1
whence − , − , 1 is the only critical point. The hessian is
3 3
2 3
2 −1 0
6 7
Hf (x, y, z) = 4−1 2 05 .
0 0 2
The principal minors are

2 3
2 −1 0
2 −1 6 7 2 −1
∆1 = 2, ∆2 = det = 3, ∆3 = 4−1 2 05 = 2 det = 6,
−1 2 −1 2
0 0 2
whence the hessian is positive definite at the critical point, from where we gather that the
critical point is a local minimum.

Appendix A
2.8.7 We have

4x3 − 4(x − y) 0
(∇f )(x, y) = = =⇒ 4x3 = 4(x − y) = −4y 3 =⇒ x = −y.
4y 3 + 4(x − y) 0
Hence
√ √
4x3 − 4(x − y) = 0 =⇒ 4x3 − 8x = 0 =⇒ 4x(x2 − 2) = 0 =⇒ x ∈ {− 2, 0, 2}.
√ √ √ √
Since x = −y, the critical points are thus (− 2, 2), (0, 0), ( 2, − 2). The Hessian is
now,
12x2 − 4 4
Hf (x, y) = ,
4 12y 2 − 4
and its principal minors are ∆1 = 12x2 − 4 and ∆2 = (12x2 − 4)(12y 2 − 4) − 16.
√ √ √ √
If (x, y) = (− 2, 2) or (x, y) = ( 2, − 2), then ∆1 = 20 > 0 and ∆2 = 384 > 0,
so the matrix is positive definite and we have a local minimum at each of these points.
If (x, y) = (0, 0) then ∆1 = −4 < 0 and ∆2 = 0, so the matrix is negative semidefinite

and further testing is needed. What happens in a neighbourhood of (0, 0)? We have
f (x, x) = 2x4 > 0, f (x, −x) = 2x4 − 4x2 = 2x2 (x2 − 1).
If x is close enough to 0, = 2x2 (x2 −1) < 0, which means that the function both increases
and decreases to 0 in a neighbourhood of (0, 0), meaning that there is a saddle point there.
2.8.8 We have
2 3 2 3
8xz − 2y − 8x 0
6 7 6 7
∇f (x, y, z) = 4 −2x + 1 5 = 405 =⇒ x = 1/2; y = −1; z = 1/2.
2
4x − 2z 0
The hessian is 2 3
8z − 8 −2 8x
6 7
H = 4 −2 0 0 5.
8x 0 −2
The principal minors are 8z − 8; −4, and 8. At z = 1/2, the matrix is negative definite
and the critical point is thus a saddle point.
2.8.9 We have 2 3
2x + yz
6 7
(∇f )(x, y, z) = 42y + xz 5 ,
2z + xy
and 2 3
2 z y
6 7
Hr f = 4z 2 x5 .
y x 2

Answers and Hints

2 z
We see that ∆1 (x, y, z) = 2, ∆2 (x, y, z) = det = 4 − z 2 and ∆3 (x, y, z) =
z 2
det Hr f = 8 − 2x2 − 2 2y32
− 2z 2 + 2xyz.
0
6 7
If (∇f )(x, y, z) = 405 then we must have
0
2x = −yz,
2y = −xz,
2z = −xy,
and upon multiplication of the three equations,
8xyz = −x2 y 2 z 2 ,
that is,
xyz(xyz + 8) = 0.
Clearly, if xyz = 0, then we must have at least one of the variables equalling 0, in which
case, by virtue of the original three equations, all equal 0. Thus (0, 0, 0) is a critical
point. If xyz = −8, then none of the variables is 0, and solving for x, say, we must have
8
x = − , and substituting this into 2x + yz = 0 we gather (yz)2 = 16, meaning that
yz
either yz = 4, in which case x = −2, or zy = −4, in which case x = 2. It is easy to
see then that either exactly one of the variables is negative, or all three are negative. The
other critical points are therefore (−2, 2, 2), (2, −2, 2), (2, 2, −2), and (−2, −2, −2).
At (0, 0, 0), ∆1 (0, 0, 0) = 2 > 0, ∆2 (0, 0, 0) = 4 > 0, ∆1 (0, 0, 0) = 8 > 0, and thus
(0, 0, 0) is a minimum point. If x2 = y 2 = z 2 = 4, xyz = −8, then ∆2 (x, y, z) = 0, ∆3 =
−32, so these points are saddle points.
2.8.10 We have 2 3
2xy + 2
6 7
(∇f )(x, y, z) = 4x2 + 2yz 5 ,
y2 − 1
and 2 3
2y 2x 0
6 7
Hr f = 42x 2z 2y 5 .
0 2y 0

2y 2x
We see that ∆1 (x, y, z) = 2y, ∆2 (x, y, z) = det = 4yz − 4x2 and ∆3 (x, y, z) =
2x 2z
det Hr f = −8y 3 . 2 3
0
6 7
If (∇f )(x, y, z) = 405 then we must have
0
xy = −1,
x2 = −2yz,
y = ±1,

Appendix A
1 1 1
and hence (1, −1, ), and (−1, 1, − ) are the critical points. Now, ∆1 (1, −1, ) = −2,
2 2 2
1 1 1
∆2 (1, −1, ) = −6, and ∆3 (1, −1, ) = 8. Thus (1, −1, ) is a saddle point. Similarly,
2 2 2
1 1 1
∆1 (−1, 1, − ) = 2, ∆2 (−1, 1, − ) = −6, and ∆3 (−1, 1, − ) = −8, shewing that
2 2 2
1
(1, −1, ) is also a saddle point.
2
2.8.11 We find 2 3
4yz − 4x3
6 7
∇f (x, y, z) = 44xz − 4y 3 5 .
4xy − 4z 3
Assume ∇f (x, y, z) = 0. Then
4yz = 4x3 , 4xz = 4y 3 , 4xy = 4z 3 =⇒ xyz = x4 = y 4 = z 4 .
Thus xyz ≥ 0, and if one of the variables is 0 so are the other two. Thus (0, 0, 0) is the
only critical point with at least one of the variables 0. Assume now that xyz 6= 0. Then
1
(xyz)3 = x4 y 4 z 4 = (xyz)4 =⇒ xyz = 1 =⇒ yz = =⇒ x4 = 1 =⇒ x = ±1.
x
Similarly, y = ±1, z = ±1. Since xyz = 1, exactly two of the variables can be negative.
Thus we find the following critical points:
(0, 0, 0), (1, 1, 1), (−1, −1, 1), (−1, 1, −1), (1, −1, −1).
The Hessian is 2 3
−12x2 4z 4y
6 7
Hx f = 4 4z −12y 2 4x 5.
4y 4x −12z 2
If 1 = xyz = x2 = y 2 = z 2 , we have ∆1 = −12x2 = −12 < 0, ∆2 = 144x2 y 2 − 16z 2 =
144 − 16 = 128 > 0, and
∆3 = −1728x2 y 2 z 2 + 192x4 + 192z 4 + 128zyx + 192y 4

= −1728 + 192 + 192 + 128 + 192
= −1024
< 0.
This means that for xyz 6= 0 the Hessian is negative definite and the function has a
local maximum at each of the four points (1, 1, 1), (−1, −1, 1), (−1, 1, −1), (1, −1, −1).
Observe that at these critical points f = 1. Now f (0, 0, 0) = 0 and f (−1, 1, 1) = −7.
2.8.12 Rewrite: f (x, y, z) = xyz(4 − x − y − z) = 4xyz − x2 yz − xy 2 z − xyz 2 . Then,

2 3
4yz − 2xyz − y 2 z − yz 2
6 7
(∇f )(x, y, z) = 4 4xz − x2 z − 2xyz − xz 2 5 ,
4xy − x2 y − xy 2 − 2xyz
2 3
−2yz z(4 − 2x − 2y − z) y(4 − 2x − y − 2z)
6 7
Hf (x, y, z) = 4z(4 − 2x − 2y − z) −2xz x(4 − x − 2y − 2z)5
y(4 − 2x − y − 2z) x(4 − x − 2y − 2z) −2xy

Answers and Hints
Equating the gradient to zero, we obtain,
yz(4 − 2x − y − z) = 0, xz(4 − x − 2y − z) = 0, xy(4 − x − y − 2z) = 0.
If xyz 6= 0 then we must have
4 − 2x − y − z = 0, 4 − x − 2y − z = 0, 4 − x − y − 2z = 0 =⇒ x = y = z = 1.
In this case 2 3
−2 −1 −1
6 7
Hf (1, 1, 1) = 4−1 −2 −15
−1 −1 −2
and the principal minors are ∆1 = −2 < 0, ∆2 = 3 > 0, and ∆3 = −4 < 0, so the
matrix is negative definite and we have a local maximum at (1, 1, 1).
If either of x, y, or z is 0, we will get ∆3 = 0, so further testing is needed. Now,
f (x, x, x) = x3 (4 − 3x), f (x, −x, x) = x3 (−4 + x).
Thus as x → 0+ then f (x, x, x) > 0 and f (x, −x, x) < 0, which means that in some
neighbourhood of (0, 0, 0) the function is both decreasing towards 0 and increasing to-
wards 0, which means that (0, 0, 0) is a saddle point.
2 2 2
2.8.13 To facilitate differentiation observe that g(x, y, z) = (xe−x )(ye−y )(ze−z ). Now
2 2 2 2
3
(1 − 2x2 )(yz)(e−x )(e−y )(e−z )
6 2 2 2 7
∇g(x, y, z) = 4(1 − 2y 2 )(xz)(e−x )(e−y )(e−z )5 .
2 2 2
(1 − 2z 2 )(xy)(e−x )(e−y )(e−z )
The function is 0 if any of the variables is 0. Since the function clearly assumes positive
and negative values, we can discard any point with a 0. If ∇(x, y, z) = 0, then x =
1 1 1
± √ ; y = ± √ z = ± √ . We find
2 2 2
2 3
(4x3 − 6x)(yz) (1 − 2x2 )(1 − 2y 2 )z (1 − 2x2 )(1 − 2z 2 )y
6 7
Hx g = t(x, y, z) 4(1 − 2y 2 )(1 − 2x2 )z (4y 3 − 6y)(xz) (1 − 2y 2 )(1 − 2z 2 )x5 ,
(1 − 2z 2 )(1 − 2x2 )y (1 − 2z 2 )(1 − 2y 2 )x (4z 3 − 6z)(xy)
2 2 2
with t(x, y, z) = (e−x )(e−y )(e−z ). Since at the critical points we have 1 − 2x2 =
1 − 2y 2 = 1 − 2z 2 = 0, the Hessian reduces to
2 3
(4x3 − 6x)(yz) 0 0
6 7
Hx g = (e−3/2 ) 4 0 (4y 3 − 6y)(xz) 0 5.
0 0 (4z 3 − 6z)(xy)
We have
∆1 = (4x3 − 6x)(yz)
∆2 = (4x3 − 6x)(4y 3 − 6y)(xyz 2 )
∆3 = (4x3 − 6x)(4y 3 − 6y)(4z 3 − 6z)(x2 y 2 z 2 ).

Appendix A
Also,
3 3
1 1 √ 1 1 √
4 √ −6 √ = −2 2 < 0, 4 −√ − 6 −√ = 2 2 > 0.
2 2 2 2
This means that if an even number of the variables is negative (0 or 2), then we the Hessian
is negative definite, and if an odd numbers of the variables is positive (1 or 3), the Hessian
is positive definite. We conclude that we have local maxima at
1 1 1 1 1 1 1 1 1 1 1 1
( √ , √ , √ ), (− √ , − √ , √ ), (− √ , √ , − √ ), ( √ , − √ , − √ )
2 2 2 2 2 2 2 2 2 2 2 2
and local minima at

1 1 1 1 1 1 1 1 1 1 1 1
(− √ , − √ , − √ ), (− √ , √ , √ ), ( √ , − √ , √ ), ( √ , √ , − √ ).
2 2 2 2 2 2 2 2 2 2 2 2
2.8.14 By the Fundamental Theorem of Calculus, there exists a continuously differen-

tiable function G such that
Z x 2 +y
f (x, y) = g(t)dt = G(x2 + y) − G(y 2 − x).
y 2 −x
Hence
∂f
(x, y) = 2xG′ (x2 + y) + G′ (y 2 − x) = 2xg(x2 + y) + g(y 2 − x);
∂x
∂f
(x, y) = G′ (x2 + y) − 2yG′ (y 2 − x) = g(x2 + y) − 2yg(y 2 − x).
∂y
This gives
∂f ∂f
(0, 0) = g(0) = (0, 0) = 0,
∂x ∂y
so (0, 0) is a critical point. Now, the Hessian of f is

2g(x2 + y) + 4x2 g ′ (x2 + y) − g ′ (y 2 − x) 2xg ′ (x2 + y) + 2yg ′ (y 2 − x)
Hf (x, y) = ,
2xg ′ (x2 − y) + 2yg ′ (y 2 − x) g ′ (x2 + y) − 2g(y 2 − x) − 4y 2 g ′ (y 2 − x)
and so ′
−g (0) 0
Hf (0, 0) = .
0 g ′ (0)
Regardless of the sign of g ′ (0), the determinant of of this last matrix is −(g ′ (0))2 < 0,
and so (0, 0) is a saddle point.
√
144 − 16x2
2.8.15 Since the coordinates (x, ), −3 ≤ x ≤ 3 describe an ellipse centred
3 p
at the origin and semi-axes 3 and 4, and the coordinates (y, 4 − y 2 ), −2 ≤ y ≤ 2
describe a circle centred at the origin with radius 2, the problem reduces to finding the
minimum between the boundaries of the circle and the ellipse. Geometrically this is easily
seen to be 1.

Answers and Hints
2.9.1 We have
2 3 2 3
bc 2b + 2c
6 7 6 7
∇(abc) = λ∇(2ab + 2bc + 2ca − S) =⇒ 4ca5 = λ 42a + 2c5
ab 2b + 2a
bc = 2λ(b + c)
=⇒ ca = 2λ(a + c)
ab = 2λ(b + a)
By physical considerations, abc 6= 0 and so λ 6= 0. Hence, by successively dividing the

equations,
b b+c c a+c a b+a
= =⇒ a = b, = =⇒ b = c, = =⇒ a = c.
a c+a b b+a c b+c
Therefore √
S
2a2 + 2a2 + 2a2 = S =⇒ a = √ ,
6
and the maximum volume is √ 3
( S)
abc = √ .
( 6)3
The above result can be simply obtained by using the AM-GM inequality:
S 2ab + 2bc + 2ca S 3/2

= ≥ ((2ab)(2bc)(2ca))1/3 = 2(abc)2/3 =⇒ abc ≤ 3/2 .
3 3 6
Equality happens if √
S
2ab = 2bc = 2ca =⇒ a = b = c = √ .
6
2.9.2
2 3
a
6 7
1. The vector 4 b 5 is perpendicular to Π. Hence, the equation of the perpendicular
c
passing through P is
Ǒ Ǒ 2 3
x 1 a
6 7
y = 1 + t 4 b 5 =⇒ x = 1 + ta, y = 1 + tb, z = 1 + tc.
z 1 c
The intersection of the line and the plane happens when

d−a−b−c
a(1 + at) + b(1 + tb) + c(1 + tc) = d =⇒ t = .
a 2 + b2 + c 2
Hence d − a − b − c
1+a·
a 2 + b2 + c 2
d−a−b−c
P′ = 1+b· 2
a + b2 + c 2
d−a−b−c
1+c· 2
a + b2 + c 2

Appendix A
The distance is then

r

d−a−b−c 2 d−a−b−c 2 d−a−b−c 2
a· 2 + b · + c ·
a + b2 + c 2 a 2 + b2 + c 2 a 2 + b2 + c 2
2. Let f (x, y, z) = (x − 1)2 + (y − 1)2 + (z − 1)2 be the square of the distance from
P to a point on the plane and let g(x, y, z) = ax + by + cz − d. Using Lagrange
multipliers,
2 3 2 3
2(x − 1) a
6 7 6 7
∇f (x, y, z) = λ∇g(x, y, z) =⇒ 42(y − 1)5 = λ 4 b 5 =⇒ 2(x−1) = λa, 2(y−1) = λb, 2(z−1) = λc.
2(z − 1) c
Since (1, 1, 1) is not on the plane and abc 6= 0, we gather that λ 6= 0. Now,
λa λb λc
x =1+ , y =1+ , z =1+ .
2 2 2
Putting these into the equation of the plane,

λa λb λc d−a−b−c
a 1+ +b 1+ +c 1+ = d =⇒ λ = 2 · 2 .
2 2 2 a + b2 + c 2
Then the coordinates of P ′ are
λa d−a−b−c λb d−a−b−c λc d−a−b−c
x = 1+ = 1+a· 2 , y = 1+ = 1+b· 2 , z = 1+ = 1+c· 2 ,
2 a + b2 + c 2 2 a + b2 + c 2 2 a + b2 + c 2
as before.
3. Consider the function
2
d − ax − by
t(x, y) = (x − 1)2 + (y − 1)2 + −1 ,
c
which is the square of the distance from a point (x, y, z) on the plane to the point
(1, 1, 1).
Now, 2 3
a d − ax − by
2(x − 1) − 2 −1 0
∇t(x, y) = 4 c c 5 =
b d − ax − by 0
2(y − 1) − 2 −1
c c
which implies
−b2 − c2 + ab − ad + ac d−a−b−c c2 + a2 − ab + bd − bc d−a−b−c

x= = 1+a· 2 , y= = 1+b· 2
a 2 + b2 + c 2 a + b2 + c 2 a 2 + b2 + c 2 a + b2 + c 2
as before. Substituting this in the equation of the plane gives the same coordinate
of z, as before.
2.9.3 Using CBS,
x + 3y x4 + 81y 4 1/4 361/4 √ √

≤( ) = 1/4 =⇒ x + 3y ≤ 23/4 6 = 25/4 3.
2 2 2
2.9.4 Using AM-GM,
1 p 2x + 3y + z
= 6
x2 y 3 z ≤ =⇒ 2x + 3y + z ≥ 62/3 .
61/3 6

Answers and Hints
2.9.5 We put g(x, y) = 5x2 + 6xy + 5y 2 − 8 and argue using Lagrange multipliers. We
have
2x 10x + 6y
∇f (x, y) = λ∇g(x, y) =⇒ =λ .
2y 6x + 10y
This gives the three equations
0 = 5(λ − 1)x + 3y; 0 = 3x + 5(λ − 1)y; 5x2 + 6xy + 5y 2 = 8.
The linear system (the first two equations) will have the unique solution (0, 0) as long as
25(λ−1)2 −9 6= 0, but this solution does not lie on the third equation. If 25(λ−1)2 −9 = 0,
then we deduce that x = ±y. Substituting this into the third equation we gather that
√ 1
10x2 ± 6x2 = 8, resulting in x = ± 2 or x = ± √ . Taking into account the third equa-
√ √ √ √2 √ √ √ √
tion, the feasible values are ( 2, − 2), (− 2, 2), (1/ 2, 1/ 2), (−1/ 2, −1/ 2)
The desired maximum is thus
√ √ √ √
f (− 2, 2) = f ( 2, − 2) = 4
and the minimum is

√ √ √ √
f (1/ 2, 1/ 2) = f (−1/ 2, −1/ 2) = 1.
Aliter: Observe that, using AM-GM,
8 6 8 6 x2 + y 2 5 8
5x2 +6xy +5y 2 = 8 =⇒ x2 +y 2 = − xy ≥ − · =⇒ x2 +y 2 ≥ · = 1.
5 5 5 5 2 8 5
2.9.6 Put g(x, y) = xp + y p − 1. We need a = pλxp−1 and b = pλy p−1 . Clearly then ,
λ 6= 0. We then have
1/(p−1) 1/(p−1)
a b
x= , y= .
λp λp
Thus p/(p−1) p/(p−1)
p p a b
1=x +y = + ,
λp λp
which gives
p/(p−1) p/(p−1) (p−1)/p
a b
λ= + .
p p
This gives
a1/(p−1) b1/(p−1)
x= , y= .
(a1/(p−1)
+b 1/(p−1) )1/p (a 1/(p−1) + b1/(p−1) )1/p
Since f is non-negative, these points define a maximum for f and so
ap/(p−1) bp/(p−1)
ax + by ≤ + .
(a1/(p−1) + b1/(p−1) )1/p (a1/(p−1) + b1/(p−1) )1/p
2.9.7 Let g(x, y, z) = (x − 1)2 + (y − 2)2 + (z − 3)2 − 4. We solve

2 3 2 3
x x
6 7 6 7
∇f 4y 5 = λ∇g 4y 5
z z

Appendix A
for x, y, λ. This requires 2 3 2 3

2x 2(x − 1)λ
6 7 6 7
42y 5 = 42(y − 2)λ 5 .
2z 2(z − 3)λ
−λ −2λ −3λ
Clearly, λ 6= 1. This gives x = , y = , and z = . Substituting into
1−λ 1−λ 1−λ
2 2 2
(x − 1) + (y − 2) + (z − 3) = 4, we gather that
2 2 2
−λ −2λ −3λ
−1 + −2 + −3 = 4,
1−λ 1−λ 1−λ
from where √
14
λ =1± .
2
This gives the two points

2 4 6
(x, y, z) = 1 + √ ,2 + √ ,3 + √
14 14 14
and
2 4 6
(x, y, z) =1− √ ,2 − √ ,3 − √ .
14 14 14
√
12 14
The first point gives an absolute maximum of 18 + and the second an absolute
√ 7
12 14
minimum of 18 − .
7
2.9.8 Observe that the ellipse is symmetric about the origin. Now maximise and minimise
the distance between a point on the ellipse and the origin. If a and b are the semi-axes,
you will find that 2a = 2 and 2b = 6
2.9.9 Put g(x, y, z) = x2 + y 2 − 2, h(x, y, z) = x + z − 1. We must find λ, δ such that
∇f (x, y, z) = λ∇g(x, y, z) + δ∇h(x, y, z),
which translates into

1 = 2λx + δ,
1 = 2λy,
1 = δ,
and
x2 + y 2 = 1,
x + z = 1.
√ √
We deduce that√x = 0, y = ± 2, z = 1. We may shew that (0, 2, 1) yields a maximum
and that (0, − 2, 1) yields a minimum.
2.9.10 One can use Lagrange multipliers here. But perhaps the easiest approach is to
put y = 1 − x and maximise
È
f (x) = x + x(1 − x).

Answers and Hints
For this we have

√
′ 1 − 2x 1 2
f (x) = 0 =⇒ 1 + p = 0 =⇒ x = + .
2 x(1 − x) 2 4
Since
(1 − 2x)2 1
f ′′ (x) = − − p < 0,
4(x(1 − x))3/2 x(1 − x)
the value sought is a maximum. This maximum is thus
√ √
1 2 1 2
f + = + .
2 4 2 2
2.9.11 Claim: the function achieves its maximum on the boundary of the triangle. To
prove this claim we have to prove that there are no critical points strictly inside the trian-
gle. For this we compute the gradient and set it equal to the zero vector:

−axa−1 y b e−(x+y ) 0
(∇f )(x, y) = = =⇒ x = 0 or y = 0,
−bxa y b−1 e−(x+y ) 0
which means that the critical points occur on the boundary. Since the function is iden-
tically 0 for x = 0 or y = 0, we only need to look on the line x + y = 1 for the maxima.
Hence we maximise f subject to the constraint x + y = 1. Since x + y = 1, we can see
that f (x, y) = xa y b e−(x+y ) = xa y b e−1 on the line, so the problem reduces to maximising
h(x, y) = xa y b subject to the constraint x + y = 1. Using Lagrange multipliers,
a−1 b
ax y 1
(∇h)(x, y) = λ(∇g)(x, y) =⇒ a b−1
=λ ,
bx y 1
which in turn
b a
=⇒ axa−1 y b = λ = bxa y b−1 =⇒ ay = bx =⇒ ay = b(1−y) =⇒ y = , x= .
a+b a+b
Finally,
a b
a b
f (x, y) = xa y b e−(x+y ) ≤ xa y b e−1 ≤ e−1 .
a+b a+b
2.9.12 Observe that
f (x + π, y + π) = cos2 (x + π) + cos2 (y + π) = cos2 x + cos2 y = f (x, y),
so f is doubly-periodic
of period π in
each argument. This means that we may restrict
ourselves to x ∈ 0; π and y ∈ 0; π . Put g(x, y) = x − y. Then
∇f (x, y) = λ∇g(x, y) =⇒ −2 sin x cos x = λ, −2 sin y cos y = −λ

=⇒ 2 sin x cos x = −2 sin y cos y
π π π
=⇒ − sin 2x = sin 2y = sin 2 x − = (sin 2x)(cos ) − (sin )(cos 2x) = − cos 2
4 2 2
π
A similar analysis gives sin 2y = − cos 2y. If cos 2x = 0 then x = and so y = 0. In
4
this case π π 1
f , 0 = cos2 = .
4 4 2

Appendix A
π π
If cos 2y = 0 then y = and so x = . In this case
4 2
π π 1
f , = .
2 4 2
If, however, − cos 2x 6= 0 then
π π
− sin 2x = − cos 2x =⇒ tan 2x = 1 =⇒ x = =⇒ y = − .
8 8
In this case we have π π π
f ,− = 2 cos2 ≈ 1.707106781.
8 8 8
If, however, cos 2y 6= 0 then
3π 5π
sin 2y = − cos 2y =⇒ tan 2y = −1 =⇒ y = =⇒ x = .
8 8
In this case we have

5π 3π 3π
f , = 2 cos2 ≈ .2928932190.
8 8 8
2.9.15 Try p(x, y) = (y 2 + 1)x2 + 2xy + 1.
3.3.1
1. Let L1 : y = x + 1, L2 : −x + 1. Then
Z Z Z
xdx + ydy = xdx + ydy + xdx + ydy
C ZL11 L 2Z
1
= xdx(x + 1)dx + xdx − (−x + 1)dx
−1 0
= 0.
√
Also, both on L1 and on L2 we have ||dx|| = 2dx, thus
Z Z Z
xy||dx|| = xy||dx|| + xy||dx||
C L1 Z L2 Z 1
√ 1 √
= 2 x(x + 1)dx − 2 x(−x + 1)dx
−1 0
= 0.
π π
2. We put x = sin t, y = cos t, t ∈ − ; . Then
2 2
Z Z π /2
xdx + ydy = (sin t)(cos t)dt − (cos t)(sin t)dt
C −π /2
= 0.
È
Also, ||dx|| = (cos t)2 + (− sin t)2 dt = dt, and thus
Z Z π /2
xy||dx|| = (sin t)(cos t)dt
C −π /2

(sin t)2 π /2
=
2 −π /2
= 0.

Answers and Hints
√
3.3.2 Let Γ1 denote the straight line segment path from O to A = (2 3, 2) and Γ2 denote
π
the arc of the circle centred at (0, 0) and radius 4 going counterclockwise from θ = to
6
π
θ= .
5
←→ x
Observe that the Cartesian equation of the line OA is y = √ . Then on Γ1
3
x x 4
xdx + ydy = xdx + √ d √ = xdx.
3 3 3
Hence
Z Z 2
√
3
4
xdx + ydy = xdx = 8.
Γ1 0 3
π
On the arc of the circle we may put x = 4 cos θ, y = 4 sin θ and integrate from θ =
6
π
to θ = . Observe that there
5
xdx + ydy = (cos θ)d cos θ + (sin θ)d sin θ = − sin θ cos θdθ + sin θ cos θdθ = 0,
and since the integrand is 0, the integral will be zero.
Assembling these two pieces,

Z Z Z
xdx + ydy = xdx + ydy + xdx + ydy = 8 + 0 = 8.
Γ Γ1 Γ2
> LineInt( VectorField( <x,y> ), Line( <0,0>, <2*sqrt(3),2> ))
> +LineInt( VectorField( <x,y> ), Arc(Circle( <0,0>, 4), Pi/6, Pi/5) );
3.3.3 Using the parametrisations from the solution of problem 3.3.3, we find on Γ1 that
È É
1 2
x||dx|| = x (dx)2 + (dy)2 = x 1 + dx = √ xdx,
3 3
whence
Z Z 2
√
3
2 √
x||dx|| = √ xdx = 4 3.
Γ1 0 3
On Γ2 that
È È
x||dx|| = x (dx)2 + (dy)2 = 16 cos θ sin2 θ + cos2 θdθ = 16 cos θdθ,
whence
Z Z π /5
π π π
x||dx|| = 16 cos θdθ = 16 sin − 16 sin = 4 sin − 8.
Γ2 π /6 5 6 5
Assembling these we gather that

Z Z Z
√ π
x||dx|| = x||dx|| + x||dx|| = 4 3 − 8 + 16 sin .
Γ Γ1 Γ2 5

Appendix A
> PathInt(x, [x,y]= Line( <0,0>, <2*sqrt(3),2> ))
> +PathInt(x, [x,y]=Arc(Circle( <0,0>, 4), Pi/6, Pi/5) );
3π π
Maple gives 16 cos rather than our 16 sin . To check that these two are indeed
10 5
the same, use the code
> is(16*cos(3*Pi/10)=16*sin(Pi/5));
which returns true.
3.3.4 The curve lies on the sphere, and to parametrise this curve, we dispose of one of
the variables, y say, from where y = 1 − x and x2 + y 2 + z 2 = 1 give
x2 + (1 − x)2 + z 2 = 1 =⇒ 2x2 − 2x + z 2 = 0

1 2 1
=⇒ 2 x− + z2 =
2 2
1 2
=⇒ 4 x− + 2z 2 = 1.
2
So we now put
1 cos t sin t 1 cos t

x= + , z= √ , y =1−x = − .
2 2 2 2 2
We must integrate on the 2 3side of the plane that can be viewed from the point (1, 1, 0)
1
6 7 1 2
(observe that the vector 415 is normal to the plane). On the zx-plane, 4 x − +2z 2 =
2
0
1 is an ellipse. To obtain a positive parametrisation we must integrate from t = 2π to t = 0
(this is because when you look at the ellipse from the point (1, 1, 0) the positive x-axis is
to your left, and not your right). Thus
I Z 0
sin t 1 cos t
zdx + xdy + ydz = √ d +
Z 0 2 2 2
Γ 2π

1 cos t 1 cos t
+ + d −
Z2π0 2 2

2 2
1 cos t sin t
+ − d √
2
Z 0 2π 2 2
sin t cos t cos t sin t 1
= + √ + − √ dt
2π 4 2 2 4 2 2
π
= √ .
2
3.5.1 2
1
3.5.2
3
15π
3.5.3
16

Answers and Hints
3.5.4 The integral equals
Z Z Z √
1 x
xydxdy = x y dy dx
0 x2
D Z 1
1
= x(x − x4 ) dx
0 2
1
= .
12

Z Z Z π Z π
x sin x sin ydxdy + y sin x sin ydxdy = 2 y sin y dy sin x dx
0 0
D D
= 4π.
3.5.6 The integral is
Z Z Z 1 Z y Z 1 Z 1
x2 dxdy + y 2 dxdy = x2 dxdy + y 2 dxdy
0 0 0 y
x≤y y ≤x
Z Z 1
y3
1

= dy + y 2 − y 3 dy
0 3 3 0 4 1
y 4 1 y y
= + −
12 0 3 4 0
1 1 1
= + −
12 3 4
1
= .
6
21
3.5.7
8
3.5.8 Observe that

√ √ 2
3 3 √
x2 + y 2 = 16, y = − x + 4 =⇒ 16 − x2 = − x+4 =⇒ x = 0, 2 3.
3 3
The integral is
Z 2
√
3 Z √16−x 2 Z 2 p√
3 √
2
3
√ xdydx = x 16 − x + x − 4 dx
0 − 33 x+4 0 3
√ 2√ 3
1 3 3
= − (16 − x2 )3/2 + x − 2x2
3 9 0
8
= .
3
3.5.9 e − 1

Appendix A
3.5.10 We have
Z Z Z
min(x, y 2 )dA = xdA + y 2 dA
[0;1]2 [0;1]2 [0;1]2
x≤y 2 y 2 <x
Z 1 Z y2 Z 1Z 1
= xdxdy + y 2 dxdy
0Z 0 Z 10 y 1 2
1 y 2
1
= x2 dy + y 2 x dy
2 Z0 0
Z 1 0 y2
1
1 4 2 4
= y dy + (y − y )dy
2 0 0
1 2
= +
10 15
7
= .
30
←→ x
3.5.11 Begin by finding the Cartesian equations of the various lines: for OA is y =
3
←→ ←→
(0 ≤ x ≤ 1), for AB is y = 3x − 8 (3 ≤ x ≤ 4), and for BO is y = x (0 ≤ x ≤ 4).
We have a choice of whether integrating with respect to x or y first. Upon examining

the region, one notices that it does not make much of a difference. I will integrate with
←→
respect to y first. In such a case notice that for 0 ≤ x ≤ 3, y goes from the line OA to the
←→ ←
→ ←→
line OB, and for 3 ≤ x ≤ 4, y goes from the line AB to the line OB
Z Z 3 Z x Z 4 Z x
xydA = xydydx + xydydx
R 0Z x/3 3Z 3x−8
3 x 4 x
1 1
= xy 2 dx + xy 2 dx
2 Z0 x/3
2 3 Z 3x−8
1
3
x 2
1
4

= x x2 − dx + x x2 − (3x − 8)2 dx
2 Z0 9Z 2 3
4
3
1
4

= x3 dx + −8x3 + 48x2 − 64x dx
9 0 2 3
= 9+9
= 18.
> int(x*y, [x,y]=Triangle(<0,0>,<3,1>,<4,4>));
Maple can also provide the limits of integration, but this command is limited, since
Maple is quite whimsical about which order of integration to choose. It also evaluates
expressions that it deems below its dignity to return unevaluated.
> int(x*y, [x,y]=Triangle(<0,0>,<3,1>,<4,4>), ’inert’);

Answers and Hints
3.5.12 Integrating by parts,

Z Z 1
Z 1−x

loge (1 + x + y)dxdy = loge (1 + x + y) dy dx
0 0
D Z 1
= [(1 + x + y) loge (1 + x + y) − (1 + x + y)]1−x
0 dx
Z0 1
= (2 loge (2) − 1 − loge (1 + x) − x loge (1 + x) + x) dx
0
1
= .
4
3.5.13 First observe that on [0; 2]2 , 0 ≤ Tx + y 2 U ≤ 6, so we decompose the region of

integration according to where Tx + y 2 U jumps across integer values. We have
Z Z Z Z Z Z
Tx + y 2 UdA = 1dA + 2dA + 3dA + 4dA + 5dA
[0;2]2
[0;2]2 [0;2]2 [0;2]2 [0;2]2 [0;2]2
Tx+yZ
2 U=1 Tx+y 2Z
U=2 Z
Tx+y 2 U=3 Z
Tx+y 2 U=4 Z
Tx+y 2 U=5
= dA + 2 dA + 3 dA + 4 dA + 5 dA
[0;2]2 [0;2]2 [0;2]2 [0;2]2 [0;2]2
1≤x+y 2 <2 2≤x+y 2 <3 3≤x+y 2 <4 4≤x+y 2 <5 5≤x+y 2 <6
By looking at the regions (as in figures A.13 through A.17 below) (I am omitting the details
of the integrations, relying on Maple for the evaluations), we obtain
Z Z 1 Z √ 2−x Z 2 Z √ 2−x
4 4√ 2 2 4√
dA = √ dydx + dydx = − + 2+ =− + 2.
0 1−x 1 0 3 3 3 3 3
[0;2]2
1≤x+y 2 <2
Z Z 2 Z √3−x
√ 8√ 4
2 dA = 2 √ dy dx = 4 3 − 2− .
0 2−x 3 3
[0;2]2
2≤x+y 2 <3
Z Z 2 Z √4−x
√ √
3 dA = 3 √ dy dx = 18 − 6 3 − 4 2.
0 3−x
[0;2]2
3≤x+y 2 <4
Z Z 1 Z 2 Z 2 Z √ 5−x
40 √ 64 √ 16 √
4 dA = 4 √ dy dx+4 √ dy dx = − +8 3+ −16 3+ 2.
0 4−x 1 4−x 3 3 3
[0;2]2
4≤x+y 2 <5
Z Z 2 Z 5
50 √
5 dA = 5 √ dy dx = − + 10 3.
1 5−x 3
[0;2]2
4≤x+y 2 <5
Adding all the above, we obtain

Z
22 4√ 4√
Tx + y 2 UdA = + 3− 2 ≈ 7.7571.
[0;2] 2 3 3 3

2 2 2 2
1 1 1 1Appendix A
0 0 0 0
2 0 1 2 0 1 2 0 1 2 0 1 2
1
Figure A.13: 1 ≤ x + Figure A.14: 2 ≤ x + Figure A.15: 3 ≤ x + Figure A.16: 4 ≤ x +
y2 < 2. y2 < 3. y2 < 4. y2 < 5.
0
0 1 2
Figure A.17: 5 ≤ x +
y2 < 6.
3.5.14 Observe that in the rectangle [0 ; 1] × [0 ; 2] we have 0 ≤ x + y ≤ 3. Hence

Z Z Z
Tx + yUdA = R 1dA + R 2dA
R
Z1≤x+y
2 Z 2−x
<2
Z 2Z 2
2≤x+y <3
= 1dydx + 2dydx
1 1−x 1 2−x
= 4.
Z 1 Z √ 4−x 2 Z 2 Z √4−x 2
7
3.5.15 √ xdydx + xdydx = .
0 1−x 2 1 0 3
Z 1 Z 3 Z 2 Z −1 Z 2 Z 1 Z 2 Z 3
3.5.16 xdxdy + xdxdy + xdxdy + xdxdy = 7.
0 −2 1 −2 1 0 1 2
3.5.17 Exchanging the order of integration,

Z π /2 Z y Z π /2
cos y
dxdy = cos ydy = 1.
0 0 y 0
3.5.18 Upon splitting the domain of integration, we find that the integral equals
Z Z Z y 2
2 y2 2
πx 2y πx
sin dx dy = − cos dy
2y π 2y
1 y 1
Z 2
y
2y πy
= − cos −dy
π1 2
4(π + 2)
= ,
π3
upon integrating by parts.
3.5.19 The integral is 0. Observe that if (x, y) ∈ D then (−x, y) ∈ D. Also, f (−x, y) =
−f (x, y).
Z √ Z 1
√ √
2/ 5 4−y 2
2 8 5
3.5.20 √ dxdy = + 4 arcsin .
−2/
√
5 1
−2 4−y 2 5 5

Answers and Hints

Z Z 1 Z 1−x
xydA = 1 + x xy dy dx
0 0
D Z 1
1 1−x 2
= x dx
Z0 2 2 1+x
2
(t − 1)(t − 2)
= dt
1 t2
11
= 4 loge 2 − .
4
3.5.22 Using integration by parts,

Z Z Z
1 1−x 2
2 2
loge (1 + x + y)dA = loge (1 + x + y) dy dx
0 0
D Z 1
= (2 loge (2) − 1 − loge (1 + x2 ))dx
0Z
1
+ (−x2 loge (1 + x2 ) + x2 ) dx
0
2 8 π
= loge 2 + − .
3 9 3
Z 2 Z √ 4−y 2
3.5.23 √ xdxdy = 2.
0 2y −y 2
3.5.25 Let
D1 = {(x, y) ∈ R2 | − 1 ≤ x ≤ 1, x ≤ y},
D2 = {(x, y) ∈ R2 | − 1 ≤ x ≤ 1, x > y}.
Then D = D1 ∪ D2 , D1 ∩ D2 = ∅ and so
Z Z Z
f (x, y)dxdy = f (x, y)dxdy + f (x, y)dxdy.
D1 D2
D
By symmetry, Z Z
f (x, y)dxdy = f (x, y)dxdy,
D1 D2
and so Z Z
f (x, y)dxdy = 2 f (x, y)dxdy
D ZD11 Z 1
= 2 (y − x) dy dx
Z 1−1 x
= (1 − 2x + x2 ) dx
−1
8
= .
3
3.5.26 The line joining A, and B has equation y = −x − 2, line joining B, and C has
equation y = −7x + 10, and line joining A, and C has equation y = 2x + 1. We split

Appendix A
the triangle along the vertical line x = 1, and integrate first with respect to y. The desired
integral is then
Z Z 1 Z 2x+1
(2x + 3y + 1) dxdy = (2x + 3y + 1)dy dx
D −1 Z 2
Z −7x+10
−x−2
+ (2x + 3y + 1)dy dx
Z 1 1 −x−2

21 2 3
= x + 9x − dx
−1 Z 2 2
2

+ 60x2 − 198x + 156 dx
1
= 4−1
= 3.
3.5.27 Since f is positive and decreasing,

Z 1 Z 1
f (x)f (y)(y − x)(f (x) − f (y))dxdy ≥ 0,
0 0
from where the desired inequality follows.
3.5.28 The domain of integration is a triangle. The integral equals

Z Z 1
Z 1−x

xy(x + y)dxdy = xy(x + y) dy dx
0 0
D
Z 2
1 1−x
y y3
= x x + dx
Z0 1 2 3 0
2

x(1 − x) (1 − x)3
= x + dx
0 2 3
1
= .
30
Z 1
3.5.29 For t ∈ [0; 1], first argue that f (x)dx ≥ (1 − t)f (t) ≥ f (t) − t. Hence
0
Z 1 Z 1 Z 1 Z 1
(f (x)dx) dy ≥ (f ◦ g)(y)dy − g(y)dy.
0 0 0 0
Z 1 Z 1 Z 1
Since f (x)dxdy = f (x)dx, the desired inequality is established.
0 0 0
3.5.30 Put f (x, y) = xy + y 2 . If I, II, III, IV stand for the intersection of the region with
each quadrant, then
Z Z Z
f (x, y)dxdy = f (−x, y)d(−x)dy = − f (x, y)dxdy,
II II I
Z Z Z
f (x, y)dxdy = f (x, −y)dxd(−y) = − f (x, y)dxdy,
IV IV I

Answers and Hints
and Z Z Z
f (x, y)dxdy = f (−x, −y)d(−x)d(−y) = + f (x, y)dxdy.
III III I
Thus
Z Z Z Z Z
(xy + y 2 )dxdy = f (x, y)dxdy + f (x, y)dxdy + f (x, y)dxdy + f (x, y)dxdy
S Z
I IZI IZ
II ZV
I
= f (x, y)dxdy − f (x, y)dxdy + f (x, y)dxdy − f (x, y)dxdy

I I I I
= 0.
3.5.31 We split the rectangle [0; a] × [0; b] into two triangles, depending on whether bx <
ay or bx ≥ ay. Hence
Z a Z b Z Z
2
x 2 ,a 2 y 2 ) 2
x 2 ,a 2 y 2 ) 2
x 2 ,a 2 y 2 )
emax(b dydx = emax(b dydx + emax(b dydx
0 0
Z
bx<ay Z bx≥ay
a2 y 2 b2 x2
= e dydx + e dydx
bx<ay bx≥ay
Z b Z ay /b Z a Z bx/a
2
y2 2 2
= ea
dxdy + ea y dydx
Z0 b 0 a 2 y 2 Z a 0
2 2
0
aye bxea y
= dy + dx
0 b 0 a
2 2 2 2
ea b − 1 ea b − 1
= +
2ab
2 2
2ab
ea b − 1
= .
ab
1
3.5.32 Observe that x ≥ (x + y)2 ≥ 0. Hence we may take the positive square root
√ 2 √
giving y ≤ 2x − x. Since y ≥ 0, we must have 2x − x ≥ 0 which means that x ≤ 2.
The integral equals
Z 2 Z √ 2x−x Z 2
√ 2 √ √
xydy dx = x( 2x − x)3/2 dx
0 0 3 0
Z √2
4 √
= u2 (u 2 − u2 )3/2 du
3 Z0
1
1
= (1 − v 2 )3/2 (1 + v)2 dv
6 −1
Z π /2
1
= cos4 θ(1 + sin2 θ)dθ
6 −π /2
7π
= .
96
3.5.33 Observe that
Z (
a 0 if a is an integer
sin 2πx dx = 1
0 (1 − cos 2πa) if a is not an integer
2π

Appendix A
Thus Z a
sin 2πx dx = 0 ⇐⇒ a is an integer.
0
Now
N Z
X
sin 2πx sin 2πy dxdy = 0
k=1 Rk
since at least one of the sides of each Rk is an integer. Since

Z N Z
X
sin 2πx sin 2πy dxdy = sin 2πx sin 2πy dxdy,
R k=1 Rk
we deduce that at least one of the sides of R is an integer, finishing the proof.
3.5.34 We have
Z 1Z 1 Z 1 n Z
Y 1 Y
n
1 1
··· (x1 x2 · · · xn )dx1 dx2 . . . dxn = xk dxk = = n.
0 0 0 0 2 2
k=1 k=1
3.5.35 This is
Z 1Z 1 Z n Z Z Z
1 X
n
X 1 1 1
··· xk dx1 dx2 . . . dxn = ··· xk dx1 dx2 . . . dxn
0 0 0 k=1 k=1 0 0 0
Xn
1
=
2
k=1
n
= .
2
Z Z 3
Z 4−x

1 dy
dxdy = dy dx
(x + y)4 1 1 (x + y)4
D Z 3h i4−x
1
= − (x + y)−3 dx
1Z 3
3
1
1 1 1
= − dx
3 1 (1 + x)3 64
1
= .
48
Z Z 2/3
Z x+1
Z 4
Z 2− x

2
xdxdy = dy x dx + dy x dx
−1 0 2/3 0
D
Z Z x
2/3 4
= x(x + 1) dx + x 2− dx
−1 2/3 2
275
= .
54
3.5.46 Make the change of variables xk = 1 − yk . Then
Z 1Z 1 Z 1 π
I = ··· cos2 (x1 + x2 + · · · + xn ) dx1 dx2 . . . dxn
0 0 0 2n

Answers and Hints
equals
Z 1 Z 1 Z 1 π
··· sin2 (y1 + y2 + · · · + yn ) dy1 dy2 . . . dyn .
0 0 0 2n
2 2 1
Since sin t + cos t = 1, we have 2I = 1, and so I = .
2
u+v u−v
3.6.1 ➊ Put x = and y = . Then x + y = u and x − y. Observe that D ′
2 2
is the triangle in the uv plane bounded by the lines u = 0, u = 1, v = u, v = −u.
Its image under Φ is the triangle bounded by the equations x = 0, y = 0, x + y = 1.
Clearly also
1
dx ∧ dy = du ∧ dv.
2
➋ From the above
Z Z
2
−y 2 1
(x + y)2 ex dA = u2 euv dudv
D 2 ZD ′ Z
1 u
1
= u2 euv dudv
2 0 −u
Z 1
1 2 2
= u(eu − e−u )du
2 0
1
= (e + e−1 − 2).
4
3.6.4 Here we argue that

du = ydx + xdy,
dv = −2xdx + 2ydy.
Taking the wedge product of differential forms,
du ∧ dv = 2(y 2 + x2 )dx ∧ dy.
Hence
1
f (x, y)dx ∧ dy = (y 4 − x4 ) du ∧ dv
2(y 2 + x2 )
1 2
= (y − x2 )du ∧ dv
2
v
= du ∧ dv
2
The region transforms into
∆ = [a; b] × [0; 1].
Z Z
f (x, y)dx ∧ dy = v du ∧ dv
D ∆ Z b Z 1
1
= du v dv
2 a 0
b−a
= .
4

Appendix A
3.6.5 ➊ Formally,
Z 1 Z 1 Z 1 Z 1
dxdy
= (1 + xy + x2 y 2 + x3 y 3 + · · · )dxdy
1 − xy
0 0 Z0 1 0 1
xy 2 x2 y 3 x3 y 4
= y+ + + +··· dx
Z0 1 2 3 4 0
2 3
x x x
= (1 + + + + · · · )dx
0 2 3 4
1 1 1
= 1 + 2 + 2 + 2 + ···
2 3 4
➋ This change of variables transforms the square [0; 1] × [0; 1] in the xy plane into
the square with vertices at (0, 0), (1, 1), (2, 0), and (1, −1) in the uv plane. We will
split this region of integration into two disjoint triangles: T1 with vertices at (0, 0),
(1, 1), (1, −1), and T2 with vertices at (1, −1), (1, 1), (2, 0). Observe that
1
2
and that u + v = 2x, u − v = 2y and so 4xy = u2 − v 2 . The integral becomes
Z 1 Z 1 Z
dxdy 1 du ∧ dv
= u 2 −v 2
0 0 1 − xy 2 1− 4
T 1 ∪T Z
Z 1
2
Z u Z 2 2−u
dv dv
= 2 du + 2 du,
0 −u 4 − u2 + v 2 1 u−2 4 − u2 + v 2
as desired.
➌ This follows by using the identity
Z t
dω
= arctan t.
0 1 + Ω2
➍ This is straightforward but tedious!
3.7.1 The integral in Cartesian coordinates is
Z √
15 Z √ 16−y 2 Z Z √ 15
1
xydxdy = 15y − y 3 dy
1 1 2 1
49
= .
2

Answers and Hints
The integral in polar coordinates is

Z π Z 4 Z arccos 1 Z 4 Z π
4 4 1 4 1
r 3 sin θ cos θdrdθ + r 3 sin θ cos θdrdθ = 44 − sin θ cos θ
arcsin 1 1/ sin θ π 1/ cos θ 4 arcsin 1 sin4 θ
4 4
Z arccos
4
1
1 4 1
+ 44 − sin θ
4 π cos4 θ
Z arccos
4
1
44 4
= sin θ cos θdθ
4 arcsin π
Z 4π
1 4
− (cot θ)(csc2 θ)dθ
4 arcsin 1
Z arccos4 1
1 4
− (tan θ)(sec2 θ)dθ
4 π
4
7 7
= 28 − −
4 4
49
=
2
3.7.2 Using polar coordinates,
Z Z π /2
Z 2 cos θ

x2 − y 2 dxdy = ρ3 dρ (cos2 θ − sin2 θ)dθ
−π /2 0
D
Z π /2
= 8 cos4 θ(cos2 θ − sin2 θ) dθ
0
= π.

Z Z Z √
√ π /4 sin 2θ p
xydxdy = 4 ρ ρ2 cos θ sin θ dρ dθ
0 0
D
Z π /4
4 √ √
= ( sin 2θ)3 cos θ sin θ dθ
3 0 Z
π /4
4
= √ sin2 2θ dθ
3 √2 0
π 2
= .
12
3.7.4 Using x = aρ cos θ, y = bρ sin θ, the integral becomes
Z 2π Z 1
3 3 3 3 4 2
(ab) a cos θ + b sin θdθ ρ dρ = (ab)(a3 + b3 ).
0 0 15

Z Z π /6 Z 1
2
f (x, y)dA = ρ dρ dθ
0 2 sin θ
D
Z π /6
1
= (1 − 8 sin3 θ) dθ
3 0
π 16 √
= − + 3.
18 9

Appendix A
3.7.9 Using polar coordinates the integral becomes

Z π /2
Z 2 cos θ

4
ρ4 dρ cos2 θ sin θdθ = .
0 0 5
3.7.11 Using polar coordinates the integral becomes

Z π /4 Z 2 cos θ Z π /4
1 2 sec2 θ π
3
dρ dθ = cos θ − dθ = .
−π /4 1/ cos θ ρ 0 4 8
3.7.12 Put
D ′ = {(x, y) ∈ R2 : y ≥ x, x2 + y 2 − y ≤ 0, x2 + y 2 − x ≤ 0}.
Then the integral equals Z

2 (x + y)2 dxdy.
D′
Using polar coordinates the integral equals
Z π /2
Z cos θ
Z π /2
2 3 1
2 (cos θ + sin θ) ρ dρ dθ = cos4 θ(1 + 2 sin θ cos θ)dθ
π /4 0 2 π /4
3π 5
= − .
64 48
3.7.13 Observe that D = D2 \D1 where D2 is the disk limited by the equation x2 +y 2 = 1
and D1 is the disk limited by the equation x2 + y 2 = y. Hence
Z Z Z
dxdy dxdy dxdy
2 + y 2 )2
= 2 + y 2 )2
− .
D (1 + x D2 (1 + x D1 (1 + x2 + y 2 )2
Using polar coordinates we have

Z Z 2π Z 1
dxdy ρ π
= dρdθ =
D2 (1 + x2 + y 2 )2 0 0 (1 + ρ2 )2 2
and
Z Z π /2 Z sin θ Z π /2
dxdy ρ sin2 θdθ
= 2 dρdθ =
(1 + x2 + y 2 )2 2
(1 + ρ )2
1 + sin2 θ
D1 Z 0
+∞
0 0
√
dt dt π π 2
= − 2 = − .
0 t2 + 1 2t + 1 2 4
(We evaluated this last integral using t = tan θ) Finally, the integral equals
√ √
π π π 2 π 2
− − = .
2 2 4 4
3.7.14 We have
2xdx = cos θdρ − ρ sin θdθ, 2ydy = sin θdρ + ρ cos θdθ,
whence
4xydx ∧ dy = ρdρ ∧ dθ.

Answers and Hints
It follows that
p 1 2 2 p
x3 y 3 1 − x4 − y 4 dx ∧ dy = (x y )( 1 − x4 − y 4 )(4xy dx ∧ dy)
4 p
1 3
= (ρ cos θ sin θ 1 − ρ2 )dρ ∧ dθ
4
Observe that
x4 + y 4 ≤ 1 =⇒ ρ2 cos2 θ + ρ2 sin2 θ ≤ 1 =⇒ ρ ≤ 1.
Since the integration takes place on the first quadrant, we have 0 ≤ θ ≤ π/2. Hence the
integral becomes
Z π /2 Z 1 Z π /2 Z 1
1 3 p 1 p
(ρ cos θ sin θ 1 − ρ2 )dρdθ = cos θ sin θdθ ρ3 1 − ρ2 dρ
0 0 4 4 0 0
1 1 2
= · ·
4 2 15
1
= .
60
3.7.15 ➊ Using polar coordinates
Z 2π Z a
2 2
Ia = ρe−ρ dρ dθ = π(1 − e−a ).
0 0
➋ The domain of integration of Ja is a square of side 2a centred at the origin. The

respective domains of integration of Ia and Ia √ 2 are the inscribed and the exscribed
circles to the square.
➌ First observe that Z 2
a
2
Ja = e−x dx .
−a
Since both Ia and Ia √ 2 tend to π as a → +∞, we deduce that Ja → π. This gives
the result.
3.7.16
Z Z 2π Z 4
1 r
dA = drdθ
x2 + xy + y 2 0 2 r 2 + r 2 sin θ cos θ
4≤x 2 +y 2 ≤16
Z 2π Z 4
1
= drdθ
Z
0 r(1 + sin θ cos
2 θ)
Z
2π 4
dθ dr
=
Z0 2π 1 + sin θ cos θ 2 r
dθ
= log 2
Z
0 1 + sin θ cosθ
2π
dθ
= 2 log 2
Z0 π 2 + sin 2θ
dθ
= 4 log 2
0 2 + sin 2θ
= 4I log 2,
Z π
dθ
so the problem reduces to evaluate I = . To find this integral, we now
0 2 + sin 2θ
use what has been dubbed as “the world’s sneakiest substitution”1 : we put tan θ = t.
1
by Michael Spivak, whose Calculus book I recommend greatly.

Appendix A
In so doing we have to pay attention to the fact that θ 7→ tan θ is not continuous on
π π
[0; π], so we split the interval of integration into two pieces, [0; π] = [0; ]∪] ; π]. Then
2 2
2t 1 − t2 dt
sin 2θ = , cos 2θ = , dθ = . Hence
1 + t2 1 + t2 1 + t2
Z π Z π /2 Z π
dθ dθ dθ
= +
0 2 + sin 2θ 0 2 + sin 2θ π /2 2 + sin 2θ
Z +∞ dt Z 0 dt
1+t 2 1+t 2
= 2t
+ 2t
2 + 1+t 2 −∞ 2 + 1+t 2
Z0 +∞ Z 0
dt dt
= +
2(t2 + t + 1) 2
−∞ 2(t + t + 1)
0
Z +∞ Z 0
2 dt 2 dt
= 2t 1
+ 2t 1
3 0 (√ + √ )2 + 1 3 −∞ ( √ + √ )2 + 1
√ +∞ 3 3 √ √ √ 30 3 √ √
3 2t 3 3 3 2t 3 3
= arctan + + arctan +
3
√ 0 √ 3 3 3 −∞ 3 3
3 π π 3 π π
= − + − −
3√ 2 6 3 6 2
π 3
= .
3
We conclude that Z √
1 4π 3 log 2
dA = .
x2 + xy + y 2 3
4≤x 2 +y 2 ≤16
3.7.17 Recall from formula 1.14 that the area enclosed by a simple closed curve Γ is given
by Z
1
xdy − ydx.
2 Γ
Using polar coordinates
xdy − ydx = (ρ cos θ)(sin θdρ + ρ cos θdθ) − (ρ sin θ)(cos θdρ − ρ sin θdθ)
= ρ2 dθ.
Parametrise the curve enclosing the region by polar coordinates so that the region is
tangent to the polar axis at the origin. Let the equation of the curve be ρ = f (θ). The
area of the region is then given by
Z π Z π Z π /2
1 1 1
ρ2 dθ = (f (θ))2 dθ = ((f (θ))2 + (f (θ + π/2))2 )dθ.
2 0 2 0 2 0
By the Pythagorean Theorem, the integral above is the integral of the square of the chord
in question. If no two points are farther than 2 units, their squares are no farther than 4
units, and so the area Z π /2
1
< 4dθ = π,
2 0
a contradiction.
3.7.18 Let I(S) denote the integral sought over a region S. Since D(x, y) = 0 inside R,
I(R) = A. Let L be a side of R with length l and let S(L ) be the half strip consisting of

Answers and Hints
the points of the plane having a point on L as nearest point of R. Set up coordinates uv
so that u is measured parallel to L and v is measured perpendicular to L. Then
Z l Z +∞
I(S(L )) = e−v dudv = l.
0 0
The sum of these integrals over all the sides of R is L.

If V is a vertex of R, the points that have V as nearest from R lie inside an angle S(V )
bounded by the rays from V perpendicular to the edges meeting at V . If α is the measure
of that angle, then using polar coordinates
Z α Z +∞
I(S(V )) = ρe−ρ dρdθ = α.
0 0
The sum of these integrals over all the vertices of R is 2π. Assembling all these integrals
we deduce the result.
3.8.1 We have
Z Z 1 Z 1−y Z 1−z
zdV = zdxdzdy
E Z0 1 Z0 1−y 0
= z − z 2 dzdy
Z0 1 0
(1 − y)2 (1 − y)3
= − dy
2 3
3 1
0
4
(1 − y) (1 − y)
= −
12 6 0
1
= = .
12
3.8.3 Let A = (1, 1, 1), B = (1, 0, 0), C = (0, 0, 1), and O = (0, 0, 0). We have four
planes passing through each triplet of points:
P1 : A, B, C, x−y+z =1
P2 : A, B, O z=y
P3 : A, C, O x=y
P4 : B, C, O y = 0.
Using the order of integration dzdxdy, z sweeps from P2 to P1 , so the limits are z = y to
z = 1 − x + y. The projection of the solid on the xy plane produces the region bounded
by the lines x = 0, x = 1 and x = y on the first quadrant of the xy-plane. Thus
Z 1 Z x Z 1−x+y Z 1 Z x
dzdydx = (1 − x)dydx
0 0 y Z0 1 0

= x − x2 dx
0 2
x x 3 1
= −
2 3 0
1
= .
6

Appendix A
We use the same limits of integration as in the previous integral. We have

Z 1 Z x Z 1−x+y Z 1Z x
xdzdydx = (x − x2 )dydx
0 0 y Z 1
0 0

= x2 − x3 dx
0 3
x x4 1
= −
3 4 0
1
= .
12
3.8.4 We have
Z Z 3 Z √ 9−x 2 Z y /3
27
xdV = xdzdydx = .
E 0 0 0 8
3.8.5 The desired integral is

Z 1Z 1Z ∞ Z 1 Z 1 Z ∞
dxdydz 1 x2 y2
2 z 2 )(1 + y 2 z 2 )
= − dxdydz
0 0 0 (1 + x x2 − y 2 1 + x2 z 2 1 + y2z2
z=∞
Z0 1 Z0 1 0

1
= (x arctan(xz) − y arctan(yz)) dxdy
0 0 x2 − y 2
Z 1 Z 1
z=0
π(x − y)
= dxdy
Z0 1 Z0 1 2(x2 − y 2 )
π
= dxdy
0Z 0 2(x + y)
1
π
= log(y + 1) − log ydy
2 0 1

π
= · ((y + 1) log(y + 1) − (y + 1) − y log y + y)
2
0
= π log 2.
3.9.1 Cartesian:
Z 1 Z √ 1−y 2 Z √ x 2 +y 2
√ dzdxdy.
−1 − 1−y 2 x 2 +y 2
Cylindrical: Z Z Z
1 2π r
rdzdθdr.
0 0 r2
Spherical:
Z π /2 Z 2π Z (cos φ)/(sin φ)2
r 2 sin φdrdθdφ.
π /4 0 0
π
The volume is .
3
3.9.2
p
1. Since x2 + y 2 ≤ z ≤ 4 − x2 − y 2 , we start our integration with the z-variable.
Observe that if (x, y, z) is on the intersection of the surfaces then
√
2 −1 ± 17
z + z = 4 =⇒ z = .
2

Answers and Hints
√
2 2 2 17 − 1
Since x + y + z = 4 =⇒ −2 ≤ z ≤ 2, we must have z =
only.
2
The projection of the circle of intersection of the paraboloid and the sphere onto the
xy-plane satisfies the equation
√
17 − 1
z 2 + z = 4 =⇒ x2 + y 2 + (x2 + y 2 )2 = 4 =⇒ x2 + y 2 = ,
2
r√
17 − 1
a circle of radius . The desired integral is thus
2
È√ È√ √
Z 17−1 Z 17−1
−x 2 Z 4−x 2 −y 2
2 2
È√ È√ xdzdydx.
17−1 17−1
− 2
− 2
−x 2 x 2 +y 2
2. The z-limits remain the same as in the Cartesian

p coordinates, but translated into
cylindrical coordinates, and so r 2 ≤ z ≤ 4 − r 2 . The projection of the intersec-
r √ circle onto the xy-plane is again a circle with centre at the origin and radius
tion
17 − 1
. The desired integral
2
È√ √
Z 2π Z 17−1 Z
4−r 2
2
r 2 cos θdzdrdθ.
0 0 r2
3. Observe that
z = x2 +y 2 =⇒ r cos φ = r 2 (cos θ)2 (sin φ)2 +r 2 (sin θ)2 (sin φ)2 =⇒ r ∈ {0, (csc φ)(cot φ)}.
It is clear that the limits of the angle θ are from θ = 0 to θ = 2π. The angle φ starts
at φ = 0. Now,
√
17 − 1 √
2 17 − 1
z = r cos φ =⇒ cos φ = =⇒ φ = arccos
2 4
The desired integral

√
Z Z 17 − 1 Z
2π arccos 2
4
r 3 cos θ sin2 φdrdφdθ.
0 0 (csc φ)(cot φ)
Perhaps it is easiest to evaluate the integral using cylindrical coordinates. We obtain

É√
Z 2π Z 17 − 1 Z √
4−r 2
2 r 2 cos θdzdrdθ = 0,
0 0 r2
a conclusion that is easily reached, since the integrand is an odd function of x and the
domain of integration is symmetric about the origin in x.
3.9.3 Cartesian:
Z √
3 Z √3−y 2 Z √ 4−x 2 −y 2
√ √ dzdxdy.
− 3 − 3−y 2 1

Appendix A
Cylindrical:
Z √
3 Z 2π Z √ 4−r 2
rdzdθdr.
0 0 1
Spherical:
Z π /3 Z 2π Z 2
r 2 sin φdrdθdφ.
0 0 1/ cos φ
5π
The volume is .
3
3.9.5 We have Z Z Z Z
2π 2 2+r cos θ
ydV = r 2 sin θdzdrdθ = 0.
E 0 1 0
π
3.9.7
96
π
3.9.8
14
3.9.9 We put
x = ρ cos θ sin φ sin t; y = ρ sin θ sin φ sin t; u = ρ cos φ sin t; v = ρ cos t.
Upon using sin2 a + cos2 a = 1 three times,
x2 + y 2 + u2 + v 2 = r 2 cos2 θ sin2 φ sin2 t + r 2 sin2 θ sin2 φ sin2 t + r 2 cos2 φ sin2 t + r 2 cos2 t

= r 2 cos2 θ sin2 φ + r 2 sin2 θ sin2 φ + r 2 cos2 φ
= r 2 cos2 θ + r 2 sin2 θ
= r2.
Now,
dx = cos θ sin φ sin tdr − ρ sin θ sin φ sin tdθ + ρ cos θ cos φ sin tdφ + ρ cos θ sin φ cos tdt
dy = sin θ sin φ sin tdr + ρ cos θ sin φ sin tdθ + ρ sin θ cos φ sin tdφ + ρ sin θ sin φ cos tdt
.
du = cos φ sin tdr − ρ sin φ sin tdφ + ρ cos φ cos tdt
dv = cos tdr − ρ sin tdt
After some calculation,
dx ∧ dy ∧ du ∧ dv = r 3 sin φ sin2 tdr ∧ dφ ∧ dθ ∧ dt.
Therefore
Z ZZ Z Z π Z 2π Z π Z 1
2
+y 2 +u 2 +v 2 2
ex dxdydudv = r 3 er sin φ sin2 tdrdφdθdt
0 0 0 0
x 2 +y 2 +u 2 +v 2 ≤1
Z 1 Z 2π Z π Z π
2
= r 3 er dr dθ sin φdφ sin2 tdt
0 π 0 0 0
1
= (2π)(2)
2 2
= π 2.

Answers and Hints
3.9.10 We make the change of variables
u = x + y + z =⇒ du = dx + dy + dz,
uv = y + z =⇒ udv + vdu = dy + dz,

uvw = z =⇒ uvdw + uwdv + vwdu = dz.
This gives
x = u(1 − v),
y = uv(1 − w),
z = uvw,
2
u v du ∧ dv ∧ dw = dx ∧ dy ∧ dz.
To find the limits of integration we observe that the limits of integration using dx ∧ dy ∧ dz
are
0 ≤ z ≤ 1, 0 ≤ y ≤ 1 − z, 0 ≤ x ≤ 1 − y − z.
This translates into
0 ≤ uvw ≤ 1, 0 ≤ uv − uvw ≤ 1 − uvw, 0 ≤ u − uv ≤ 1 − uv + uvw − uvw.
Thus
0 ≤ uvw ≤ 1, 0 ≤ uv ≤ 1, 0 ≤ u ≤ 1,
which finally give
0 ≤ u ≤ 1, 0 ≤ v ≤ 1, 0 ≤ w ≤ 1.
The integral sought is then, using the fact that for positive integers m, n one has
Z 1
m!n!
xm (1 − x)n dx = ,
0 (m + n + 1)!
we deduce, Z Z Z
1 1 1
u20 v 18 w 8 (1 − u)4 (1 − v)(1 − w)9 dudvdw,
0 0 0
which in turn is
Z 1 Z 1 Z 1
1 1 1
u20 (1 − u)4 du v 18 (1 − v)dv w 8 (1 − w)9 dw = · ·
0 0 0 265650 380 437580
which is
1
= .
44172388260000
3.10.1 We parametrise the surface by letting x = u, y = v, z = u + v 2 . Observe that the

domain D of Σ is the square [0; 1] × [0; 2]. Observe that
dy ∧ dz = −du ∧ dv,
dz ∧ dx = −2vdu ∧ dv,
and so 2 p
d x = 2 + 4v 2 du ∧ dv.

Appendix A

Z Z Z p
2 1
y d2 x = v 2 + 4v 2 dudv
0 0
Σ Z 1 Z 2 p
= du y 2 + 4v 2 dv
√
0 0
13 2
= .
3
3.10.2 Using x = r cos θ, y = r sin θ, 1 ≤ r ≤ 2, 0 ≤ θ ≤ 2π, the surface area is

Z 2π Z 2
√ √
2 rdrdθ = 3π 2.
0 1
3.10.3 We use spherical coordinates, (x, y, z) = (cos θ sin φ, sin θ sin φ, cos φ). Here θ ∈
[0; 2π] is the latitude and φ ∈ [0; π] is the longitude. Observe that
dx ∧ dy = sin φ cos φdφ ∧ dθ,
dy ∧ dz = cos θ sin2 φdφ ∧ dθ,

dz ∧ dx = − sin θ sin2 φdφ ∧ dθ,
and so 2
d x = sin φdφ ∧ dθ.

Z Z Z
2π π
x2 d2 x = cos2 θ sin3 φdφdθ
0 0
Σ
4π
= .
3
3.10.4 Put x = u, y = v, z 2 = u2 + v 2 . Then
dx = du, dy = dv, zdz = udu + vdv,
whence
u v
dx ∧ dy = du ∧ dv, dy ∧ dz = − du ∧ dv, dz ∧ dx = − du ∧ dv,
z z
and so È
2
d x = (dx ∧ dy)2 + (dz ∧ dx)2 + (dy ∧ dz)2
É
u2 + v 2
= 1+ du ∧ dv
√ z2
= 2 du ∧ dv.
Hence
Z Z Z Z √
p √ √ 2π 1
2π 2
z d2 x = u2 + v 2 2 dudv = 2 ρ2 dρdθ = .
0 0 3
Σ u 2 +v 2 ≤1

Answers and Hints
3.10.5 If the egg has radius R, each slice will have height 2R/n. A slice can be parametrised
by 0 ≤ θ ≤ 2π, φ1 ≤ φ ≤ φ2 , with
R cos φ1 − R cos φ2 = 2R/n.
The area of the part of the surface of the sphere in slice is
Z 2π Z φ 2
R2 sin φdφdθ = 2πR2 (cos φ1 − cos φ2 ) = 4πR2 /n.
0 φ1
This means that each of the n slices has identical area 4πR2 /n.
3.10.6 We project this plane onto the coordinate axes obtaining
Z Z 6 Z 3−z/2
27
xydydz = (3 − y − z/2)ydydz = ,
0 0 4
Σ
Z Z 3 Z 6−2x
27
− x2 dzdx = − x2 dzdx = − ,
0 0 2
Σ
Z Z 3 Z 3−y
27
(x + z)dxdy = (6 − x − 2y)dxdy = ,
0 0 2
Σ
and hence Z
27
xydydz − x2 dzdx + (x + z)dxdy = .
4
Σ
3.11.1 Evaluating this directly would result in evaluating four path integrals, one for each
side of the square. We will use Green’s Theorem. We have
dω = d(x3 y) ∧ dx + d(xy) ∧ dy
= (3x2 ydx + x3 dy) ∧ dx + (ydx + xdy) ∧ dy
= (y − x3 )dx ∧ dy.
The region M is the area enclosed by the square. The integral equals
I Z 2Z 2
x3 ydx + xydy = (y − x3 )dxdy
C 0 0
= −4.
3.11.2 We have
1 4
➊ LAB is y = x; LAC is y = −x, and LB C is clearly y = − x + .
3 3
➋ We have
Z Z 1
5
y 2 dx + xdy = (x2 + x)dx =
6
ZAB Z0 −2
1 4 2 1 15
y 2 dx + xdy = − x+ − x dx = −
ZB C Z1 0 3 3 3 2
2 2 14
y dx + xdy = (x − x)dx =
CA −2 3
Adding these integrals we find
I
y 2 dx + xdy = −2.
△

Appendix A
➌ We have
Z Z 0
Z −x/3+4/3

(1 − 2y)dx ∧ dy = (1 − 2y)dy dx
−2 −x
D
Z 1
Z −x/3+4/3

+ (1 − 2y)dy dx
0 x
44 10
= − −
27 27
= −2.
3.11.6 Observe that

d(x2 + 2y 3 ) ∧ dy = 2xdx ∧ dy.
Hence by the generalised Stokes’ Theorem the integral equals
Z Z π /2 Z 4 cos θ
2xdx ∧ dy = 2ρ2 cos θdρ ∧ dθ = 16π.
−π /2 0
{(x−2)2 +y 2 ≤4}
To do it directly, put x − 2 = 2 cos t, y = 2 sin t, 0 ≤ t ≤ 2π. Then the integral becomes

Z 2π Z 2π
2 3
((2 + 2 cos t) + 16 sin t)d2 sin t = (8 cos t + 16 cos2 t
0 0
+8 cos3 t + 32 cos t sin3 t)dt
= 16π.
3.11.7 At the intersection path

0 = x2 + y 2 + z 2 − 2(x + y) = (2 − y)2 + y 2 + z 2 − 4 = 2y 2 − 4y + z 2 = 2(y − 1)2 + z 2 − 2,
which describes an ellipse on the yz-plane. Similarly we get 2(x − 1)2 + z 2 = 2 on the
xz-plane. We have
d (ydx + zdy + xdz) = dy ∧ dx + dz ∧ dy + dx ∧ dz = −dx ∧ dy − dy ∧ dz − dz ∧ dx.
Since dx ∧ dy = 0, by Stokes’ Theorem the integral sought is
Z Z
√
− dydz − dzdx = −2π( 2).
2(y −1)2 +z 2 ≤2 2(x−1)2 +z 2 ≤2
(To evaluate the integrals you may resort to the fact that the area of the elliptical region
(x − x0 )2 (y − y0 )2
2
+ ≤ 1 is πab).
a b2
If we were to evaluate this integral directly, we would set
√
y = 1 + cos θ, z = 2 sin θ, x = 2 − y = 1 − cos θ.
Z 2π
√ √
(1 + cos θ)d(1 − cos θ) + 2 sin θd(1 + cos θ) + (1 − cos θ)d( 2 sin θ)
0
which in turn
Z 2π √ √ √
= sin θ + sin θ cos θ − 2+ 2 cos θdθ = −2π 2.
0

GNU Free Documentation License
Version 1.2, November 2002

c 2000,2001,2002 Free Software Foundation, Inc.
Copyright
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The purpose of this License is to make a manual, textbook, or other functional and useful document “free” in the sense of freedom: to assure everyone the
effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.
This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the
GNU General Public License, which is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should
come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual
work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction
or reference.
1. APPLICABILITY AND DEFINITIONS

This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under
the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The
“Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy,
modify or distribute the work in a way requiring permission under copyright law.
A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or
translated into another language.
A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or
authors of the Document to the Document’s overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus,
if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical
connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.
The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the
Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The
Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.
The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document
is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.
A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public,
that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings)
some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text
formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent
modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is
called “Opaque”.
Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using
a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats
include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for
which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for
output purposes only.
The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires
to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of
the work’s title, preceding the beginning of the body of the text.
A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text
that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”,
“Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ”
according to this definition.
The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers
are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers
may have is void and has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and
the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this
License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept
compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.
You may also lend copies, under the same conditions stated above, and you may publicly display copies.
3. COPYING IN QUANTITY
250
Appendix A
If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document’s
license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front
cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must
present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited
to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover,
and continue the rest onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy
along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to
download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must
take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the
stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance
to provide you with an updated version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified
Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified
Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there
were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version
gives permission.
B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together
with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this
requirement.
C. State on the Title page the name of the publisher of the Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this
License, in the form shown in the Addendum below.
G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document’s license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified
Version as given on the Title Page. If there is no section Entitled “History” in the Document, create one stating the title, year, authors, and publisher of
the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network
locations given in the Document for previous versions it was based on. These may be placed in the “History” section. You may omit a network location
for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
K. For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the section, and preserve in the section all the substance and tone
of each of the contributor acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered
part of the section titles.
M. Delete any section Entitled “Endorsements”. Such a section may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled “Endorsements” or to conflict in title with any Invariant Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the
Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified
Version’s license notice. These titles must be distinct from any other section titles.
You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties–for example,
statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover
Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one
entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on
behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement
of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions,
provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of
your combined work in its license notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are
multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the
name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant
Sections in the license notice of the combined work.
In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise
combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements”.

Answers and Hints
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License
in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of
the documents in all other respects.
You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into
the extracted document, and follow this License in all other respects regarding verbatim copying of that document.
7. AGGREGATION WITH INDEPENDENT WORKS

A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution
medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation’s users beyond what
the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not
themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate,
the Document’s Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is
in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant
Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition
to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty
Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a
disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.
If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will
typically require changing the actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify,
sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
10. FUTURE REVISIONS OF THIS LICENSE

The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any
later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published
(not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published
(not as a draft) by the Free Software Foundation.
Que a quien robe este libro, o lo tome prestado y no lo devuelva,

se le convierta en una serpiente en las manos y lo venza. Que sea
golpeado por la parálisis y todos sus miembros arruinados. Que
languidezca de dolor gritando por piedad, y que no haya coto a
su agonı́a hasta la última disolución. Que las polillas roan sus
entrañas y, cuando llegue al final de su castigo, que arda en las
llamas del Infierno para siempre.
-Maldición anónima contra los ladrones de libros en el monasterio de

San Pedro, Barcelona.

Bibliography
[BlRo] Thomas BLYTH, Edmund ROBERTSON, Basic Linear Algebra.

[Mun] James R. MUNKRES, Analysis on Manifolds.
[Buck] R.C. BUCK, Advanced Calculus.
[Din] Seán DINEEN Multivariate Calculus and Geometry
[MarTro] Jerrold E. MARSDEN and Anthony TROMBA, Vector Calculus
[HubHub] John H. HUBBARD and Barbara Burke HUBBARD, Vector Calculus,
Linear Algebra, and Differential Forms, A Unified Approach.
[Lan] Serge LANG, Introduction to Linear Algebra.
[Spik] Michael SPIVAK, Calculus on Manifolds: A Modern Approach to Classi-
cal Theorems of Advanced Calculus.
[Edw] Harold M. EDWARDS, Advanced Calculus: A Differential Forms Ap-
proach.
[Mun] James R. MUNKRES, Analysis on Manifolds.
[Tod] Isaac TODHUNTER, Spherical Trigonometry.
253

Vector Calculus Book

Uploaded by

Document Informationclick to expand document informationPermission is granted to copy, distribute and / or modify this document under the terms of the GNU Free Documentation License, version 1. Or any later version published by the Free Software Foundation.

Document Informationclick to expand document information

Copyright:

Available Formats

Vector Calculus Book

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Vector Calculus Book

Uploaded by

Copyright:

Available Formats

January 15, 2009 Version

Multivariable and Ve tor Cal ulus

Copyright c 2007 David Anthony SANTOS. Permission is granted to

1 Vectors and Parametric Curves 1

3.9 Change of Variables . . . . . . . . . . . . . . . . . . . . . . . . . . 172

A Answers and Hints 186

GNU Free Documentation License 250

Throughout these notes I use Maple version 10 commands in order to illus-

I would appreciate any comments, suggestions, corrections, etc., which can

1.1 Points and Vectors on the Plane

1 Definition (Scalar, Point, Bi-point, Vector) A scalar α ∈ R is simply a real num-

2 Example Consider the points

Figure 1.3: Example 2.

In more technical language, a vector is an equivalence class of bi-points, that

Free to photocopy and distribute 2

Figure 1.4: Direction of a Figure 1.5: Bi-points Figure 1.6: Bi-points

☞ Bi-point [b, a] has the opposite sense of [a, b] and so we write

Free to photocopy and distribute 3

Figure 1.7: Addition of Vectors. Figure 1.8: Scalar multiplication of vectors.

It is easy to see that vector addition is commutative and associative, that

See figures 1.7, 1.9, 1.10, and 1.11.

Free to photocopy and distribute 4

Figure 1.9: Commutativity Figure 1.10: Associativity Figure 1.11: Difference

See figure 1.12.

If u1 = 0, the affine line defined above is vertical, as x is constant. If u1 6= 0,

Free to photocopy and distribute 5

Figure 1.12: Parametric equation of a line on the plane.

Free to photocopy and distribute 6

Solution: ◮ The desired equation is plainly

Solution: ◮ Utilising Chasles’ Rule several times:

Solution: ◮ Let the midpoints of [A, B] and [C, A], be MC and MB ,

15 Example In △ABC, let MC be the midpoint of [A, B]. Demonstrate that

Free to photocopy and distribute 7

from where the result follows. ◭

16 Example If the medians [A, MA ] and [B, MB ] of the non-degenerate △ABC

See figure 1.13.

17 Example The medians of a non-degenerate triangle △ABC are concurrent.

Free to photocopy and distribute 8

Solution: ◮ Let G be as in example 16. We must shew that the line

demonstrating the result. ◭

Problem 1.1.6 Let x, y, z be points on the

Free to photocopy and distribute 9

||[Q, z]|| = 3 : 4 and let P be a point on scalars α ≥ 0, β ≥ 0 with α + β = 1

Free to photocopy and distribute 10

1.2 Scalar Product on the Plane

SP2 Scalar Homogeneity

Figure 1.20: Theorem 21.

Free to photocopy and distribute 11

23 Definition Two vectors are said to be orthogonal if they are perpendicular. If →

Since | cos θ| ≤ 1 we also have

25 Corollary (Cauchy-Bunyakovsky-Schwarz Inequality)

Free to photocopy and distribute 12

|a1 b1 + a2 b2 | ≤ (a21 + a22 )1/2 (b21 + b22 )1/2 . (1.10)

26 Example Let a, b be positive real numbers. Minimise a2 + b2 subject to the

Solution: ◮ By the CBS Inequality,

27 Corollary (Triangle Inequality)

28 Example Let x, y, z be positive real numbers. Prove that