Scribd
Upload
57 views2 pages

Technical Note - Remote OPC Server October 3, 2003 - Rev. C

Uploaded by

lin2m3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views2 pages

Technical Note - Remote OPC Server October 3, 2003 - Rev. C

Uploaded by

lin2m3
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Note – Remote OPC Server

October 3, 2003 – Rev. C


©Copyright InduSoft Systems Ltd. 2003

Remote OPC Server


Utility to Configure OPC Server Settings to
the Remote OPC Client Station

Introduction

OPC (OLE for Process Control) uses DCOM to exchange data between two stations. You must register some
parameters in the station where the OPC Client is executed. InduSoft developed the OPCSrvReg.exe program to
read these parameters from the OPC Server and set them in the station where the OPC Client is executed.

Save Settings from OPC Server Station

ƒ Execute the OPCSrvReg.exe program.


ƒ Select the OPC Server which will be used to exchange data with the remote OPC Client.
ƒ Press the Save To File button to create the OPCSvrReg.lst file with the settings of the OPC Server selected.

Page 1
Technical Note – Remote OPC Server
October 3, 2003 – Rev. C
©Copyright InduSoft Systems Ltd. 2003

Set Settings to the OPC Client Station

ƒ Copy the OPCSvrReg.lst file created in the OPC Server Station to the OPC Client Station (same directory
where the OPCSrvReg.exe program is stored).
ƒ Execute OPCSrvReg.exe in the OPC Client Station.
ƒ Press the Install button to open the Install dialog.
ƒ Select the OPC Server name which will be used to exchange data with the OPC Client and press the To Register
button to set this OPC Server parameters in the OPC Client Station (Registry settings).

Configure OPC Client and exchange data with the OPC Server

After executing the procedure described above, the OPC Client can be configured to exchange data with the remote
OPC Server.

# Note: There are versions of the OPCSrvReg.exe program for both the WinNT/2K and WinCE operating systems.
This program is stored in the \BIN folder of Studio or CEView.

History of Revisions

Revision Date Author Description


A May 20, 2000 Fabio Terezinho Initial Version
ƒ Modified the document layout.
B July 1, 2001 Fabio Terezinho
ƒ Updated the WinCE support.
ƒ Modified the document layout.
C October 3, 2003 Fabio Terezinho
ƒ Updated the WinCE support.

Page 2

You might also like