CEMENTATION GUIDE

TYPE OF CERAMIC TYPE OF RESTORATION BONDED OR CEMENTED CEMENTATION PROTOCOL SUGGESTED CEMENTS

FELDSPATHIC Inlays, Onlays, Crowns, Veneers Bond, then resin the cement TOOTH SURFACE: -3M ESPE Rely X Veneer Cement with 3M ESPE Adper Single Bond Plus
-Cerec Bloc (Sirona) (excluding 2nd molar crowns) 1. Etch with phosphoric acid -Calibra with Prime and Bond NT (DENTSPLY Caulk)
-Vitablocs (VITA) 2. Rinse -Multilink Automix (Ivoclar Vivadent)
3. Apply bonding agent (4th or 5th generation) -NX3 with OptiBond Solo Plus (Kerr Corp)
CERAMIC INTERNAL SURFACE: -Variolink II with ExciTE (Ivoclar Vivadent)
4. Etch with HF at lab
5. Silanate chairside
6. Cement with light-cure or dual-cure cement

HIGH LEUCITE Inlays, Onlays, Crowns, Veneers Bond, then resin the cement TOOTH SURFACE: -3M ESPE Rely X Veneer Cement with 3M ESPE Adper Single Bond Plus
-Authentic (Jensen Industies) (excluding 2nd molar crowns) 1. Etch with phosphoric acid -Calibra with Prime and Bond NT (Dentsply Caulk)
-Avante (Pentron Ceramics) 2. Rinse -Multilink Automix (Ivoclar Vivadent)
-Cerpress SL (Leach and Dillon) 3. Apply bonding agent (4th or 5th generation) -NX3 with OptiBond Solo Plus (Kerr Corp)
-Creation CP (Jensen Industries) CERAMIC INTERNAL SURFACE: -Variolink II with ExciTE (Ivoclar Vivadent)
-Finesse All-Ceramic (DENTSPLY Ceramco) 4. Etch with HF at lab
-HD17 CAM Blocks (Benco Dental) 5. Silanate chairside
-IPS Empress (Ivoclar Vivadent) 6.Cement with light-cure or dual-cure cement
-IPS Empress CAD (Ivoclar Vivadent)
-Luminesse Pressable Porcelain (Talladium)
-OPC (Pentron Ceramics)
-Paradigm C (3M ESPE)

LITHIUM DISILICATE Anterior & Posterior crowns, 3 unit Bond, then resin the cement TOOTH SURFACE: -3M ESPE Rely X Veneer Cement with 3M ESPE Adper Single Bond Plus
-3G (pentron Ceramics) Bridges up to 2nd bicuspid 1. Etch with phosphoric acid -Calibra with Prime and Bond NT (Dentsply Caulk)
-IPS e.max Press (Ivoclar Vivadent) 2. Rinse -Linkmax (GC America)
-IPS e.max CAD (Ivoclar Vivadent) 3. Apply bonding agent (4th or 5th generation) -Multilink Automix (Ivoclar Vivadent)
CERAMIC INTERNAL SURFACE: -NX3 with OptiBond Solo Plus (Kerr Corp)
4. Etch with HF at lab -Panavia F 2.0 (Kuraray America)
5. Silanate chairside -Variolink II with ExciTE (Ivoclar Vivadent)
6.Cement with light-cure or dual-cure cement OR
-3M ESPE Rely X Unicem Self-Adhesive Universal Resin Cement
OR
-G-CEM (GC America)
1. Use self-adhesive resin cement
-Maxcem Elite (Kerr Corp.)
-SMARTCEM 2(DENTSPLY Caulk)
-seT (SDI North America, Inc.)

ALUMINA Anterior & Posterior crowns, Cement No etching or bonding. Use a self-adhesive resin -3M ESPE DURELON
-In-Ceram ALUMINA (Vident) 3-6 unit bridges (Good retention cases) -3M ESPE Rely X ARC adhesive Resin Cement
-Procera (Nobel Biocare) traditional C&B cement. -3M ESPE Rely X Unicem Self-Adhesive Universal Resin Cement
-G-CEM (GC America)
-GC Fuji Plus (GC America)
-Multilink Automix (Ivoclar Vivadent)

ZIRCONIA Anterior & Posterior crowns, Cement No etching or bonding. Use a self-adhesive resin -3M ESPE DURELON
-CERCON (DENTSPLY Ceramco) 3 unit Bridges Implants -3M ESPE Rely X Unicem Self-Adhesive Universal Resin Cement
-EVEREST (KaVo) Maryland Bridges traditional C&B cement. -G-CEM (GC America)
-IPS e.ZirCad (Ivoclar Vivadent) -GC Fuji Plus (GC America)
-Lava (3M ESPE) -Maxcem Elite (Kerr Corp.)
-Procera (Nobel Biocare) -SMARTCEM 2 (DENTSPLY Caulk)
-ZENO (Wieland) -seT (SDI North America, Inc.)
-BruxZir®