05-Worm Gearboxes 52

462 887
Lenze
Drives with worm

gearboxes 52.
Lenze Drive Systems GmbH, Postfach 10 13 52, D-31763 Hameln, Site: Groß Berkel,
Hans-Lenze-Straße 1, D-31855 Aerzen, Phone ++49 (0) 5154 82-0, Telefax ++49 (0) 5154 82-21 11
E-Mail: [email protected] · Internet: http://www.Lenze.com
Technical alterations reserved · Printed in Germany 02.03 by ME / LHM · 03/02 en
Contents
Introducing Lenze Compact units

___________________________________________________ 4 Contents ________________________________________ 51
Product information ______________________________ 52
Technical data ___________________________________ 54
Selection ________________________________________ 59
General data Drive selection ___________________________________ 61
Worm gearboxes
Possible combinations_____________________________ 5
Actual ratios ______________________________________5 DISCO-variable speed drive
Permissible radial force output ______________________6
Starting efficiency and self-locking __________________7 Contents _________________________________________ 73
AC-motors Technical data ____________________________________ 76
Technical data ____________________________________ 8 Selection_________________________________________ 80
Drive selection ___________________________________ 82
Worm geared motors

Lenze worldwide
Contents ________________________________________ 13
Product information ______________________________ 14 _________________________________________________ 98
Technical data ___________________________________ 16
Selection ________________________________________ 18
Drive selection ___________________________________ 19
Worm gearboxes
Contents ________________________________________ 39
Technical data ___________________________________ 42
Selection ________________________________________ 44
Drive selection ___________________________________ 46
Lenze 3
Introducing Lenze
No matter which drive solution you imagine,

we make your dreams come true.
According to our maxim “one stop shopping”, we offer you

a complete programme of electronic and mechanical drive
systems which are distinguished by reliability and efficiency.
Our supply range includes frequency inverters, speed
controllers, servo controllers, variable speed drives and
gearboxes, clutches and brakes, as well as the appropriate
motors.
Lenze is thus not only the supplier for single components,
but also offers solutions for complete drive systems
including project planning, execution and commissioning of
your applications.
Furthermore, a worldwide service and distribution network
allows a qualified customer advisory service on site and a
fast and extensive after sales service.
Our quality assurance system for development, production,
sales and service is certified according to DIN ISO 9001.
Our customers set the scale for measuring the quality of
our products.
Our task is to meet your requirements. Customer
orientation as a Lenze principle means the highest quality.
See for yourself.
4 Lenze
General data
Worm gearboxes
Possible combinations motor-gearboxes

Gearbox size
04 05 06 08 10 12
Ratio
Motor frame size
63 71 80 71 80 80 90 80 90 100/ 90 100/ 100/ 132
112/ 112/ 112/
05
07
10
15
20
30
40
53
60
Combination is possible with motors in B5 and B14 design.

Combination is possible with motors in B5 design.
The motor – gearbox combination only shows the

constructive possibilities; the power combination must
be checked, if not indicated in the selection tables.
Actual ratios
Size 04 05 06 08 10 12
i z2/z1 it z2/z1 it z2/z1 it z2/z1 it z2/z1 it z2/z1 it
05 29/6 04.83 29/6 04.83 29/6 04.83 30/6 05.00 30/6 05.0 29/6 04.83
07 29/4 07.25 29/4 07.25 29/4 07.25 30/4 07.50 30/4 07.5 29/4 07.25
10 40/4 10.00 38/4 09.50 39/4 09.75 40/4 10.00 40/4 10.0 40/4 10.00
13 52/4 13.00 53/4 13.25 51/4 12.75 53/4 13.25 52/4 13.0 52/4 13.00
15 29/2 14.50 29/2 14.50 29/2 14.50 30/2 15.00 30/2 15.0 29/2 14.50
20 40/2 20.00 38/2 19.00 39/2 19.50 40/2 20.00 40/2 20.0 40/2 20.00
26 52/2 26.00 53/2 26.50 51/2 25.50 53/2 26.50 52/2 26.0 52/2 26.00
30 29/1 29.00 29/1 29.00 29/1 29.00 30/1 30.00 30/1 30.0 29/1 29.00
40 40/1 40.00 38/1 38.00 39/1 39.00 40/1 40.00 40/1 40.0 40/1 40.00
53 52/1 52.00 53/1 53.00 51/1 51.00 53/1 53.00 52/1 52.0 52/1 52.00
60 62/1 62.00 62/1 62.00 61/1 61.00 62/1 62.00 62/1 62.0 62/1 62.00
z1 = Number of starts
z2 = Number of teeth of the worm wheel
it = Ratio
Lenze 5
General data
Worm gearboxes
Permissible radial forces output

The values for the permissible radial force Fr stated in the For forces Fr not acting on the middle of the output shaft, the
table below refer to the middle of the output shaft. permissible radial force Fr perm. can be calculated as follows:
Frperm = Fr · fw
x/l 0 0,2 0,4 0,6 0,8 1

fw 1.32 1.18 1.05 0.84 0.63 0.5
Size 04 05 06 08 10 12 04 05 06 08 10 12 04 05 06 08 10 12
Radial force Fr2 [kN]

i n1 = 2800 1/min n1 = 1400 1/min n1 = 930 1/min
05 1.7 2.6 3.5 04.3 12.8 22.0 2.2 3.3 4.3 4.9 12.5 21.0 2.4 3.7 4.8 5.6 12.5 21.0
07 2.1 3.2 4.2 05.0 12.8 22.0 2.6 4.0 5.1 5.8 12.5 21.0 2.9 4.4 5.7 6.7 12.3 21.0
10 2.3 3.5 4.5 05.5 12.8 22.0 2.9 4.4 5.6 6.5 12.4 21.0 3.0 4.5 5.4 7.5 12.3 21.0
13 2.8 4.2 5.0 06.0 12.8 22.0 3.3 5.0 5.6 7.2 12.3 21.0 3.3 5.0 5.4 8.3 12.2 21.0
15 2.8 4.2 5.5 06.6 12.8 22.0 3.0 4.7 5.8 7.9 12.5 21.0 2.8 4.5 5.5 9.0 12.3 21.0
20 3.1 4.6 6.0 07.2 12.8 22.0 2.9 4.6 5.7 8.7 12.3 21.0 2.7 4.4 5.2 8.8 12.2 21.0
26 3.2 4.9 5.9 07.9 12.7 22.0 3.2 4.9 5.5 8.9 12.2 21.0 3.2 4.9 5.0 8.7 12.0 21.0
30 3.2 4.9 6.1 08.6 12.8 22.0 3.0 4.7 5.8 9.2 12.5 21.0 2.8 4.5 5.5 9.0 12.3 21.0
40 3.1 4.8 6.1 09.9 12.8 22.0 2.9 4.6 5.6 9.0 12.3 21.0 2.8 4.4 5.1 8.8 12.2 21.0
53 3.1 4.8 6.0 09.7 12.7 22.0 3.2 4.8 5.4 8.8 12.2 21.0 3.2 4.8 4.9 8.6 12.0 21.0
60 3.1 4.9 6.1 10.0 12.8 22.0 3.2 4.9 5.8 9.2 12.4 21.0 3.2 4.9 5.6 9.0 12.3 21.0
i n1 = 700 1/min n1 = 500 1/min n1 = 150 1/min
05 3.0 4.0 5.1 6.0 12.2 21.0 3.0 4.3 5.1 6.5 12.0 20.0 3.0 4.3 4.0 3.2 05.4 10.0
07 2.8 4.4 5.3 7.2 12.2 21.0 2.8 4.1 4.7 7.7 11.8 20.0 2.8 4.1 2.9 1.8 04.8 10.0
10 3.0 4.3 5.0 8.4 12.0 20.0 3.0 4.2 4.2 7.5 11.5 19.5 3.0 4.3 4.3 5.6 09.4 10.0
13 3.3 5.0 5.4 8.4 11.8 20.0 3.2 5.0 5.4 8.4 11.8 20.0 3.3 5.0 5.6 8.6 11.9 20.0
15 2.7 4.3 5.1 8.5 12.0 21.0 2.7 4.0 4.4 7.6 11.6 20.0 2.7 4.0 3.9 3.2 06.2 10.0
20 2.7 4.1 4.7 8.4 11.8 20.0 2.7 4.1 3.9 7.2 11.3 19.0 2.7 4.1 3.9 5.5 08.8 10.0
26 3.2 4.9 4.6 8.0 11.6 20.0 3.2 4.9 4.6 8.0 11.0 18.5 3.2 4.9 4.8 8.0 11.1 18.5
30 2.7 4.3 5.0 8.5 12.2 21.0 2.7 4.0 4.2 7.6 11.9 20.0 2.7 4.0 1.7 3.8 08.4 10.0
40 2.7 4.1 4.6 8.4 11.8 20.0 2.7 4.0 3.9 7.1 11.2 19.0 2.7 4.0 3.9 5.7 08.6 10.0
53 3.2 4.8 4.6 8.0 11.6 20.0 3.2 4.8 4.6 8.0 10.8 18.5 3.2 4.8 4.5 8.0 10.7 17.5
60 3.2 4.9 5.6 8.5 12.0 21.0 3.2 4.9 5.6 8.3 11.5 19.5 3.2 4.9 5.6 8.2 11.3 18.5
6 Lenze
General data
Worm gearboxes
Starting efficiency and self-locking

The efficiency of a worm gearbox is determined among the lubricant. In general, the efficiency increases with the
others by the speed ratios in the gearing and the state of gearbox size, increasing speed and decreasing ratio.
Starting efficiency A
Ratio i
Starting efficiency A shocks and/or vibrations in the gearbox so that it is possible

From the above, we can conclude that the efficiency A of to start driving the worm wheel !
a worm gearbox during starting is smaller than the The static self locking can be checked roughly using the
operating efficiency at rated speed. above diagram and the starting efficiency A. If A 0.5, a
Therefore the starting efficiency A must always be gearbox has static self locking.
considered when starting under load is required.
The following diagram shows the A values, which are to Dynamic self locking:
be expected as limit values after running in. The gearbox comes to a standstill even if a torque acts on
the output side of the motor during disconnection. Dynamic
Self locking: self locking can be checked roughly using the total efficiency
A worm gearbox is in a self locking or irreversibility condition from the selection tables on pages 46/47.
when no amount of torque applied to the worm wheel will If 0.5, a gearbox has dynamic self locking.
rotate the worm shaft. We distinguish between static and A precise check of static or dynamic self locking is possible
dynamic self locking. in the factory, when the operating factors are known.
Static self locking:

In a static self locking condition it is not possible to start the
driving worm wheel from standstill. A self locking condition
of the gearing can in some cases be counteracted by
Lenze 7
General data
AC-motors
Technical data
The fitted three-phase motors comply with the standards Voltage and frequency
and regulations of electrical machines IEC 34 – VDE 530 Lenze supplies three-phase motors in the standard version
DIN 57530 and DIN 42677. with multiple-range voltage, in enclosure IP 55 and insulation
class F, suitable for the following connecting voltages:
0.18 – 3.0 kW (1500 1/min) 50 Hz: 220 – 240 / 380 – 415 V 1)

(1800 1/min) 60 Hz: 220 – 266 / 380 – 460 V
(1000 1/min) 50 Hz: 220 – 240 / 380 – 415 V 1)

(1200 1/min) 60 Hz: 220 – 266 / 380 – 460 V
4.00 – 45.0 kW (1500 1/min) 50 Hz: 380 V – 415 V 2)

(1800 1/min) 60 Hz: 440 V – 460 V
1) New rated voltage 230/400 V included

2) New rated voltage 400 V included
Three-phase motors with different specifications are to 60 Hz supply. The conversion factors for 60 Hz
available. Motors wound for 50 Hz can also be connected operation can be obtained from the table.
Motor winding 50 Hz Connection to 60 Hz Rated speed Rated power Rated torque

220 V 220 V 1.2 1.00 0.83
230 V 230 V 1.2 1.00 0.83
230 V 266 V 1.2 1.15 0.96
380 V 380 V 1.2 1.00 0.83
380 V 440 V 1.2 1.00 0.83
380 V 440 V 1.2 1.15 0.96
440 V 460 V 1.2 1.00 0.83
400 V 460 V 1.2 1.15 0.96
440 V 440 V 1.2 1.00 0.83
500 V 500 V 1.2 1.00 0.83
500 V 550 V 1.2 1.10 0.91
Permissible voltage tolerance 5 % at rated power and rated frequency acc.
to DIN 57530
Operating mode Isolation class

Continuous operation with constanting load, Isolation class F
Operating mode S1 (VDE 0530) Perm. continuous temperature <= 155 °C
Enclosure Motor protection

IP 55 : We recommend to use a circuit breaker.
Complete protection against contact, protection against Find the rated current as a first information in the table on
dust accumulation and water jets. page 9
Power derating
The rated power is valid for continuous operation acc. to For other conditions the permissible powers are listed in
DIN 57530, part 1, for a max. ambient temperature of 40 º the table below.
C, and for an installation height up to 1000 m amsl.
Ambient temperature Perm. power Installation height Perm. power

ºC in % of rated power in m amsl. in % of rated power
30 107 1000 100
35 104 1500 097
40 100 2000 094
45 096 2500 090
50 092 3000 086
55 087 3500 082
60 082 4000 077
8 Lenze
General data
AC-motors
Technical data
Rated currents
Rated power Frame size/ No. of poles Rated current IN ca. A Rated current IN ca. A
to frame size 100 to frame size 100
220 – 240 / 380 – 415 V 220 /240 V
from frame size 112 from frame size 112
380 – 415 V 400 V
multiple-range voltage standard voltage
063 L/4 0– 00.95 / 0.57
071 K/4 01.1 / 0.64 0–
00.18 071 S/6 01.3 / 0.75 01.08 / 0.62
071 L/8 0– 01.35 / 0.76
071 S / 4 01.4 / 0.82 01.35 / 0.76
00.25 071 L / 6 01.7 / 1.00 01.48 / 0.86
080 S / 8 0– 01.65 / 0.95
071 L / 4 02.1 / 1.20 01.80 / 1.00
00.37 080 S / 6 02.4 / 1.40 02.30 / 1.35
080 L / 8 0– 02.50 / 1.45
080 S / 4 02.8 / 1.60 02.45 / 1.40
00.55 080 L / 6 03.3 / 1.90 02.75 / 1.60
090 L / 8 0– 03.15 / 1.80
080 L / 4 03.5 / 2.00 03.30 / 1.90
00.75 090 S / 6 04.3 / 2.50 03.80 / 2.20
100 L / 8 0– 03.80 / 2.20
090 S / 4 04.5 / 2.60 04.75 / 2.80
01.10 090 L / 6 05.5 / 3.20 05.25 / 3.15
100 L / 8 0– 05.30 / 3.15
090 L / 4 06.0 / 3.50 06.10 / 3.50
01.50 100 L / 6 06.7 / 3.90 06.75 / 3.90
112 M / 8 0– 05.15
100 L / 4 09.7 / 5.60 09.00 / 5.30
02.20 112 M / 6 0– 05.4
132 S / 8 0– 05.4
100 L / 4 12.6 / 7.30 12.20 / 7.10
03.00 132 S / 6 0– 07.4
132 M / 8 0– 07.6
112 M / 4 08.5 08.6
04.00 132 M / 6 10.0 09.2
132 M / 8 0– 09.2
132 S / 4 11.5 11.0
05.50 132 M / 6 0– 12.7
160 M / 8 0– 11.4
132 M / 4 15.3 15.4
07.50 160 M / 6 0– 15.7
160 L / 8 0– 16.1
132 M / 4a 19.0 19.0
09.20 180 M / 8 0– 21.0
160 M / 4 22 22.0
11.00 160 L / 6 0– 22.0
180 L / 8 0– 23.5
The stated rated currents are approximate values.
Technical alterations reserved.
Lenze 9
General data
AC-motors
Options – brakes
Brake motors are fitted with Lenze spring-loaded brakes press the armature (2) against the brake rotor (3), the rotor
(mounted between motor endshield and fan blade) under the against the endshield (5). The braking torque is generated
fan cowl. When the motor is switched on, the brake is supplied through friction on both friction faces. When switching on the
with DC voltage via a suitable rectifier. The spring-loaded brake motor, the brake release coil is activated and the magnetic
is a normally on, electromagnetically released brake comprising force of the stator (1) releases the armature (2). The rotor (3)
the stator (1), the armature (2) and the brake rotor (3). It is fixed is released.
to the motor endshield (5) with screws (4) and located under the The brake torque can be reduced by max. 40 % by using
fan cowl (6). The motor endshield serves as counter friction setting ring (8).
face. When the release current does not flow the springs (7)
Hand release
1 Stator 5 Endshield
2 Armature 6 Fan cowl
3 Rotor 7 Springs
4 Screws 8 Torque setting ring
Possible combinations
Brake size – motor frame size
Brake size
Motor Motor 06 08 10 12 14 16 18 20
frame size extension
Brake torque [Nm]
[mm]
4 8 16 32 60 80 150 240
063 060
071 068
080 067
090 075
100 090
112 095
132 122
160 130
Extra weight [kg] 0.75 1.25 2.5 3.8 5.8 9.0 14.5 23.5
Hand release lever

This serves to manually release the brake and can be supplied
at a surcharge.
10 Lenze
General data
AC-motors
Options – Brakes
Brake voltage
As a rule, the brake coil voltage is designed so that it
corresponds to the delta voltage of the motor (i. e. motor Phase voltage = supply voltage
230/400 V / = brake coil voltage = 230 Vac rectified). For s3
motors which are star/delta started and with pole-changing
motors, the brake voltage is designed according to the phase
voltage of the mains supply.
Motor voltage AC voltage Rated coil Rectifier Type 4-pole Type 6-pole
input to the rectifier voltage
42/72 V 042 V 036 V Full-wave 14.630.13.004/014 14.630.32.006/016
127/220 V 127 V 115 V Full-wave 14.630.13.004/014 14.630.32.006/016
220/380 V 220 V 205 V Full-wave 14.630.13.004/014 14.630.32.006/016
103 V Half-wave 14.630.14.004/014 14.630.33.006/016
230/400 V 230 V 205 V Full-wave 14.630.13.004/014 14.630.32.006/016
103 V Half-wave 14.630.14.004/014 14.630.33.006/016
240/415 V 240 V 205 V Full-wave 14.630.13.004/014 14.630.32.006/016
103 V Half-wave 14.630.14.004/014 14.630.33.006/016
255/440 V 255 V 215 V Full-wave 14.630.13.004/014 14.630.32.006/016
115 V Half-wave 14.630.14.004/014 14.630.33/006/016
290/500 V 290 V 127 V Half-wave 14.630.14.004/014 14.630.33.006/016
380 V 380 V 180 V Half-wave 14.630.14.004/014 14.630.33.006/016
400 V 400 V 180 V Half-wave 14.630.14.004/014 14.630.33.006/016
415 V 415 V 180 V Half-wave 14.630.14.004/014 14.630.33.006/016
420 V 420 V 180 V Half-wave 14.630.14.004/014 14.630.33.006/016
440 V 440 V 205 V Half-wave 14.630.14.004/014 14.630.33.006/016
460 V 460 V 205 V Half-wave 14.630.14.004/014 14.630.33.006/016
480 V 480 V 215 V Half-wave 14.630.15.014
500 V 500 V 215 V Half-wave 14.630.15.014
Standard voltages 24 V, 103 V, 180 V, 205 V
Note:
Max. direct current:
14.630.13/14.004/014: 1 A to 60 ºC
14.630.32/33.006/016: 0.75 A to 60 ºC
14.630.15.014: on request
Max. possible nominal coil voltage: 250 V DC
Lenze 11
12 Lenze
Worm geared motors
Product information Selection of worm geared motors

Illustrations ______________________________________ 14 Selection _______________________________________ 18
Type code _______________________________________ 15 Operating factors _______________________________ 18
Order information ________________________________ 15
Drive selection
Technical data
Selection tables _________________________________ 19
Mounting positions ______________________________ 16 Dimensions _____________________________________ 36
Terminal box positions ___________________________ 17 Options _________________________________________ 38
Lenze 13
Worm geared motors
Product information
Illustrations
Worm geared motors (motor mounting B14) Worm geared motors (motor mounting B5)
52.307 / 52.507 52.107 / 52.407
52.308 / 52.508 52.108 / 52.408
52.309 / 52.509 52.109 / 52.409
52.314 / 52.514 52.114 / 52.414
14 Lenze
Worm geared motors
Product information
Type code
Type
Gearbox size
Mounting position
52.507.06.11 –
71 L/4-0-Bh
Motor design
Internal motor designation
Motor pole numbers
Motor frame size
Type
Type
Design on output side Worm geared motors
B 5-Motor B 14-Motor
Foot mounted design 52.107/52.407 52.307/52.507
Flange mounted design 52.108/52.408 52.308/52.508
Hollow shaft design 52.109/52.409 52.309/52.509
Flange/Hollow shaft design 52.114/52.414 52.314/52.514
Gearbox size Order information

04, 05, 06, 08, 10, 12 – complete type code
– Ratio
Internal motor designation – Motor power and voltage
H, O, T, W – without influence on the motor data (will be – Mounting position and position of the terminal box
indicated in the order confirmation). – Flange design: Output flange diameter
– Hollow shaft design: hollow shaft bore
Motor design – Gearbox options
Br – with spring-loaded brake – Motor options
Bh – with spring-loaded brake and hand release
Ex – explosion-proof
Fl – with separately driven fan
Ta – with tacho
Kt – with PTC thermistors
Th – with thermal circuit-breaker
Em – single phase motor
Lenze 15
Worm geared motors
Technical data
Mounting positions
with output shaft end with output flange
10 20 10 20
with hollow shaft
For output flange and hollow shaft the

mounting position of the flange-mounted
11 21 design applies.
00
13 23
14 24
15 25
16 Lenze
Worm geared motors
Technical data
Teminal box positions
Worm geared motors
Fig. A Fig. B
Terminal box positions according to figure A or figure B

depend on the gearbox size and motor flange diameter.
Standard design:
With view of the motor blower the terminal box is in pos. 1.
52.107... 52.114 52.307... 53.314

Type
52.407... 52.414 52.507... 52.514
Gearbox size Flange diameter Fig.
( 105 – B
04
` 105 A A
( 120 – B
05
` 120 A A
` 140 – B
06 ` 160 – A
` 200 A –
( 160 – B
08
` 160 A –
10 ( 300 A –
12 ( 350 A –
Lenze 17
Worm geared motors
Selection
Selection
Worm geared motors must be selected according to the input P1 = required motor power in kW
power P1 and the output speed n2, as shown in the selection n2 = output speed in rpm
tables. Ensure that the cs value shown in the table is equal to kA = factor from the table
or greater than the larger of the two factors kA and kT. If, with kT = factor from the table
the desired output speed (n2), the cs value is smaller than the
larger of the two values kA and kT, a slightly different speed
(n2) fulfilling these conditions, or, with the same power, a
motor with a larger gearbox must be selected.
It may be necessary to select a geared motor from the next
power class up.
Operating factors
Factor kA
Load class of the machine

Running time/d I II III
in h Startings per h
10 10 . . . 100 100 . . . 400 10 10 . . . 100 100 . . . 400 10 10 . . . 100 100 . . . 400
0.5 0.80 0.90 1.00 0.90 1.00 1.15 1.00 1.15 1.25
0.5 . . . 20 0.90 1.00 1.15 1.00 1.15 1.25 1.25 1.40 1.50
0.2 . . . 10 1.00 1.15 1.25 1.25 1.40 1.50 1.50 1.70 1.80
.10 . . . 24 1.25 1.40 1.50 1.50 1.70 1.80 1.80 2.00 2.10
Load classes of the machine:

III = uniform load – virtually shock-free
III = medium load – moderate shocks
III = heavy load – strong shocks
Minimum operating factor with changing load: kA = 1.40
Factor kT
Running time per hour

Ambient temperature ° C 100 % 80 % 60 % 40 % 20 %
10 0.90 0.85 0.78 0.68 0.50
20 1.00 0.94 0.86 0.74 0.56
30 1.15 1.10 1.00 0.85 0.65
40 1.35 1.25 1.15 1.00 0.76
50 1.60 1.50 1.40 1.20 0.90
18 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
i Ratio of the gearbox
cs Operating factor
Type Design Dimensions

n2 M2
P1 cs Ç Mounting position i Page
[1/min] [Nm]
(see page 16)
0.18 kW 52.507.04.Ç – 63L/4

52.508.04.Ç – 63L/4
1
2
285 5.5 10.1 5 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 63L/4 1
190 8.0 7.6 52.508.04.Ç – 63L/4 7 2 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 63L/4 1
138 10 6.1 52.508.04.Ç – 63L/4 10 2 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 71S/6 1
120 12 5.9 52.508.04.Ç – 71S/6 7 2 36/37
52.509.04.Ç – 71S/6 3
52.514.04.Ç – 71S/6 4
52.507.04.Ç – 63L/4 1
95 14 4.5 52.508.04.Ç – 63L/4 15 2 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 71S/6 1
87 16 3.9 52.508.04.Ç – 71S/6 10 2 36/37
52.509.04.Ç – 71S/6 3
52.514.04.Ç – 71S/6 4
52.507.04.Ç – 63L/4 1
69 19 3.7 52.508.04.Ç – 63L/4 20 2 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 71S/6 1
60 22 3.5 52.508.04.Ç – 71S/6 15 2 36/37
52.509.04.Ç – 71S/6 3
52.514.04.Ç – 71S/6 4
52.507.04.Ç – 63L/4 1
47 24 2.6 52.508.04.Ç – 63L/4 30 2 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 71S/6 1
43 30 2.7 52.508.04.Ç – 71S/6 20 2 36/37
52.509.04.Ç – 71S/6 3
52.514.04.Ç – 71S/6 4
52.507.04.Ç – 63L/4 1
34 32 2.2 52.508.04.Ç – 63L/4 40 2 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 71S/6 1
30 37 2.1 52.508.04.Ç – 71S/6 30 2 36/37
52.509.04.Ç – 71S/6 3
52.514.04.Ç – 71S/6 4
Design
1 = Foot-mounted design
2 = Flange-mounted design
3 = Hollow-shaft design
4 = Flange-mounted/Hollow shaft design
Lenze 19
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
P1 cs Ç Mounting position i
[1/min] [Nm] Page
(see page 16)
0.18 kW 52.507.04.Ç – 63L/4

52.508.04.Ç – 63L/4
1
2
26 38 1.3 53 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 63L/4 1
22 39 1.2 52.508.04.Ç – 63L/4 60 2 36/37
52.509.04.Ç – 63L/4 3
52.514.04.Ç – 63L/4 4
52.507.04.Ç – 71S/6 1
21 48 1.7 52.508.04.Ç – 71S/6 40 2 36/37
52.509.04.Ç – 71S/6 3
52.514.04.Ç – 71S/6 4
52.507.04.Ç – 71S/6 1
16 56 0.8 52.508.04.Ç – 71S/6 53 2 36/37
52.509.04.Ç – 71S/6 3
52.514.04.Ç – 71S/6 4
52.507.05.Ç – 71S/6 1
16 59 1.4 52.508.05.Ç – 71S/6 53 2 36/37
52.509.05.Ç – 71S/6 3
52.514.05.Ç – 71S/6 4
52.507.05.Ç – 71S/6 1
14 58 1.3 52.508.05.Ç – 71S/6 60 2 36/37
52.509.05.Ç – 71S/6 3
52.514.05.Ç – 71S/6 4
0.25 kW 52.507.04.Ç – 71S/4

52.508.04.Ç – 71S/4
1
2
285 7.6 7.2 5 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.04.Ç – 71S/4 1
190 11 5.4 52.508.04.Ç – 71S/4 7 2 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.05.Ç – 71S/4 1
145 14 6.9 52.508.05.Ç – 71S/4 10 2 36/37
52.509.05.Ç – 71S/4 3
52.514.05.Ç – 71S/4 4
52.507.04.Ç – 71S/4 1
138 15 4.4 52.508.04.Ç – 71S/4 10 2 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.04.Ç – 71L/6 1
125 16 4.3 52.508.04.Ç – 71L/6 7 2 36/37
52.509.04.Ç – 71L/6 3
52.514.04.Ç – 71L/6 4
52.507.04.Ç – 71S/4 1
95 20 3.2 52.508.04.Ç – 71S/4 15 2 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.04.Ç – 71L/6 1
91 22 2.9 52.508.04.Ç – 71L/6 10 2 36/37
52.509.04.Ç – 71L/6 3
52.514.04.Ç – 71L/6 4
20 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
0.25 kW 52.507.04.Ç – 71S/4

52.508.04.Ç – 71S/4
1
2
69 27 2.7 20 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.04.Ç – 71L/6 1
62 29 2.6 52.508.04.Ç – 71L/6 15 2 36/37
52.509.04.Ç – 71L/6 3
52.514.04.Ç – 71L/6 4
52.507.04.Ç – 71S/4 1
47 34 1.9 52.508.04.Ç – 71S/4 30 2 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.04.Ç – 71L/6 1
45 40 2.0 52.508.04.Ç – 71L/6 20 2 36/37
52.509.04.Ç – 71L/6 3
52.514.04.Ç – 71L/6 4
52.507.05.Ç – 71S/4 1
36 42 2.5 52.508.05.Ç – 71S/4 40 2 36/37
52.509.05.Ç – 71S/4 3
52.514.05.Ç – 71S/4 4
52.507.04.Ç – 71S/4 1
34 45 1.6 52.508.04.Ç – 71S/4 40 2 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.04.Ç – 71S/4 1
26 52 0.9 52.508.04.Ç – 71S/4 53 2 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.05.Ç – 71S/4 1
26 55 1.5 52.508.05.Ç – 71S/4 53 2 36/37
52.509.05.Ç – 71S/4 3
52.514.05.Ç – 71S/4 4
52.507.04.Ç – 71L/6 1
22 65 1.2 52.508.04.Ç – 71L/6 40 2 36/37
52.509.04.Ç – 71L/6 3
52.514.04.Ç – 71L/6 4
52.507.04.Ç – 71S/4 1
22 54 0.8 52.508.04.Ç – 71S/4 60 2 36/37
52.509.04.Ç – 71S/4 3
52.514.04.Ç – 71S/4 4
52.507.05.Ç – 71S/4 1
22 54 1.4 52.508.05.Ç – 71S/4 60 2 36/37
52.509.05.Ç – 71S/4 3
52.514.05.Ç – 71S/4 4
52.507.05.Ç – 71L/6 1
17 79 1.1 52.508.05.Ç – 71L/6 53 2 36/37
52.509.05.Ç – 71L/6 3
52.514.05.Ç – 71L/6 4
Design
Lenze 21
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
0.25 kW 52.507.05.Ç – 71L/6

52.508.05.Ç – 71L/6
1
2
14 78 1.0 60 36/37
52.509.05.Ç – 71L/6 3
52.514.05.Ç – 71L/6 4
0.37 kW 52.507.04.Ç – 71L/4

52.508.04.Ç – 71L/4
1
2
287 11 4.9 5 36/37
52.509.04.Ç – 71L/4 3
52.514.04.Ç – 71L/4 4
52.507.04.Ç – 71L/4 1
191 16 3.7 52.508.04.Ç – 71L/4 7 2 36/37
52.509.04.Ç – 71L/4 3
52.514.04.Ç – 71L/4 4
52.507.04.Ç – 71L/4 1
139 22 3.0 52.508.04.Ç – 71L/4 10 2 36/37
52.509.04.Ç – 71L/4 3
52.514.04.Ç – 71L/4 4
52.507.04.Ç – 80S/6 1
124 24 2.9 52.508.04.Ç – 80S/6 7 2 36/37
52.509.04.Ç – 80S/6 3
52.514.04.Ç – 80S/6 4
52.507.04.Ç – 71L/4 1
95 29 2.2 52.508.04.Ç – 71L/4 15 2 36/37
52.509.04.Ç – 71L/4 3
52.514.04.Ç – 71L/4 4
52.507.04.Ç – 80S/6 1
90 33 2.0 52.508.04.Ç – 80S/6 10 2 36/37
52.509.04.Ç – 80S/6 3
52.514.04.Ç – 80S/6 4
52.507.05.Ç – 71L/4 1
73 38 2.8 52.508.05.Ç – 71L/4 20 2 36/37
52.509.05.Ç – 71L/4 3
52.514.05.Ç – 71L/4 4
52.507.04.Ç – 71L/4 1
69 39 1.8 52.508.04.Ç – 71L/4 20 2 36/37
52.509.04.Ç – 71L/4 3
52.514.04.Ç – 71L/4 4
52.507.04.Ç – 80S/6 1
62 44 1.7 52.508.04.Ç – 80S/6 15 2 36/37
52.509.04.Ç – 80S/6 3
52.514.04.Ç – 80S/6 4
52.507.04.Ç – 71L/4 1
47 50 1.3 52.508.04.Ç – 71L/4 30 2 36/37
52.509.04.Ç – 71L/4 3
52.514.04.Ç – 71L/4 4
52.507.05.Ç – 71L/4 1
47 51 1.9 52.508.05.Ç – 71L/4 30 2 36/37
52.509.05.Ç – 71L/4 3
52.514.05.Ç – 71L/4 4
52.507.04.Ç – 80S/6 1
45 60 1.4 52.508.04.Ç – 80S/6 20 2 36/37
52.509.04.Ç – 80S/6 3
52.514.04.Ç – 80S/6 4
22 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
0.37 kW 52.507.05.Ç – 71L/4

52.508.05.Ç – 71L/4
1
2
36 63 1.7 40 36/37
52.509.05.Ç – 71L/4 3
52.514.05.Ç – 71L/4 4
52.507.04.Ç – 71L/4 1
34 66 1.1 52.508.04.Ç – 71L/4 40 2 36/37
52.509.04.Ç – 71L/4 3
52.514.04.Ç – 71L/4 4
52.507.04.Ç – 80S/6 1
31 75 1.0 52.508.04.Ç – 80S/6 30 2 36/37
52.509.04.Ç – 80S/6 3
52.514.04.Ç – 80S/6 4
52.507.05.Ç – 80S/6 1
31 77 1.6 52.508.05.Ç – 80S/6 30 2 36/37
52.509.05.Ç – 80S/6 3
52.514.05.Ç – 80S/6 4
52.507.05.Ç – 71L/4 1
26 81 1.0 52.508.05.Ç – 71L/4 53 2 36/37
52.509.05.Ç – 71L/4 3
52.514.05.Ç – 71L/4 4
52.507.05.Ç – 80S/6 1
23 94 1.4 52.508.05.Ç – 80S/6 40 2 36/37
52.509.05.Ç – 80S/6 3
52.514.05.Ç – 80S/6 4
52.507.05.Ç – 71L/4 1
22 80 1.0 52.508.05.Ç – 71L/4 60 2 36/37
52.509.05.Ç – 71L/4 3
52.514.05.Ç – 71L/4 4
52.307.06.Ç – 80S/6 1
17 123 2.0 52.308.06.Ç – 80S/6 53 2 36/37
52.309.06.Ç – 80S/6 3
52.314.06.Ç – 80S/6 4
52.307.06.Ç – 80S/6 1
14 124 1.5 52.308.06.Ç – 80S/6 60 2 36/37
52.309.06.Ç – 80S/6 3
52.314.06.Ç – 80S/6 4
0.55 kW 52.507.04.Ç – 80S/4

52.508.04.Ç – 80S/4
1
2
285 16 3.3 5 36/37
52.509.04.Ç – 80S/4 3
52.514.04.Ç – 80S/4 4
52.507.04.Ç – 80S/4 1
190 24 2.5 52.508.04.Ç – 80S/4 7 2 36/37
52.509.04.Ç – 80S/4 3
52.514.04.Ç – 80S/4 4
52.507.04.Ç – 80S/4 1
138 33 2.0 52.508.04.Ç – 80S/4 10 2 36/37
52.509.04.Ç – 80S/4 3
52.514.04.Ç – 80S/4 4
Design
Lenze 23
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
0.55 kW 52.507.04.Ç – 80L/6

52.508.04.Ç – 80L/6
1
2
122 37 1.9 7 36/37
52.509.04.Ç – 80L/6 3
52.514.04.Ç – 80L/6 4
52.507.05.Ç – 80S/4 1
95 45 2.2 52.508.05.Ç – 80S/4 15 2 36/37
52.509.05.Ç – 80S/4 3
52.514.05.Ç – 80S/4 4
52.507.05.Ç – 80S/4 1
72 57 1.9 52.508.05.Ç – 80S/4 20 2 36/37
52.509.05.Ç – 80S/4 3
52.514.05.Ç – 80S/4 4
52.507.05.Ç – 80L/6 1
61 68 1.8 52.508.05.Ç – 80L/6 15 2 36/37
52.509.05.Ç – 80L/6 3
52.514.05.Ç – 80L/6 4
52.507.05.Ç – 80S/4 1
47 77 1.3 52.508.05.Ç – 80S/4 30 2 36/37
52.509.05.Ç – 80S/4 3
52.514.05.Ç – 80S/4 4
52.507.05.Ç – 80S/4 1
36 94 1.2 52.508.05.Ç – 80S/4 40 2 36/37
52.509.05.Ç – 80S/4 3
52.514.05.Ç – 80S/4 4
52.307.06.Ç – 80S/4 1
35 99 1.9 52.308.06.Ç – 80S/4 40 2 36/37
52.309.06.Ç – 80S/4 3
52.314.06.Ç – 80S/4 4
52.507.05.Ç – 80L/6 1
30 116 1.1 52.508.05.Ç – 80L/6 30 2 36/37
52.509.05.Ç – 80L/6 3
52.514.05.Ç – 80L/6 4
52.307.06.Ç – 80L/6 1
30 118 1.7 52.308.06.Ç – 80L/6 30 2 36/37
52.309.06.Ç – 80L/6 3
52.314.06.Ç – 80L/6 4
52.307.06.Ç – 80S/4 1
27 123 1.7 52.308.06.Ç – 80S/4 53 2 36/37
52.309.06.Ç – 80S/4 3
52.314.06.Ç – 80S/4 4
52.507.05.Ç – 80L/6 1
23 142 0.9 52.508.05.Ç – 80L/6 40 2 36/37
52.509.05.Ç – 80L/6 3
52.514.05.Ç – 80L/6 4
52.307.06.Ç – 80S/4 1
22 128 1.3 52.308.06.Ç – 80S/4 60 2 36/37
52.309.06.Ç – 80S/4 3
52.314.06.Ç – 80S/4 4
52.307.08.Ç – 80S/4 1
22 140 2.1 52.308.08.Ç – 80S/4 60 2 36/37
52.309.08.Ç – 80S/4 3
52.314.08.Ç – 80S/4 4
24 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
0.55 kW 52.307.06.Ç – 80L/6

52.308.06.Ç – 80L/6
1
2
17 184 1.3 53 36/37
52.309.06.Ç – 80L/6 3
52.314.06.Ç – 80L/6 4
52.307.08.Ç – 80L/6 1
16 201 2.1 52.308.08.Ç – 80L/6 53 2 36/37
52.309.08.Ç – 80L/6 3
52.314.08.Ç – 80L/6 4
52.307.06.Ç – 80L/6 1
14 186 1.0 52.308.06.Ç – 80L/6 60 2 36/37
52.309.06.Ç – 80L/6 3
52.314.06.Ç – 80L/6 4
52.307.08.Ç – 80L/6 1
14 208 1.7 52.308.08.Ç – 80L/6 60 2 36/37
52.309.08.Ç – 80L/6 3
52.314.08.Ç – 80L/6 4
0.75 kW 52.507.04.Ç – 80L/4

52.508.04.Ç – 80L/4
1
2
285 22 2.4 5 36/37
52.509.04.Ç – 80L/4 3
52.514.04.Ç – 80L/4 4
52.507.04.Ç – 80L/4 1
190 33 1.8 52.508.04.Ç – 80L/4 7 2 36/37
52.509.04.Ç – 80L/4 3
52.514.04.Ç – 80L/4 4
52.507.05.Ç – 80L/4 1
145 43 2.3 52.508.05.Ç – 80L/4 10 2 36/37
52.509.05.Ç – 80L/4 3
52.514.05.Ç – 80L/4 4
52.507.05.Ç – 80L/4 1
95 61 1.6 52.508.05.Ç – 80L/4 15 2 36/37
52.509.05.Ç – 80L/4 3
52.514.05.Ç – 80L/4 4
52.507.05.Ç – 80L/4 1
72 77 1.4 52.508.05.Ç – 80L/4 20 2 36/37
52.509.05.Ç – 80L/4 3
52.514.05.Ç – 80L/4 4
52.307.06.Ç – 80L/4 1
70 81 2.3 52.308.06.Ç – 80L/4 20 2 36/37
52.309.06.Ç – 80L/4 3
52.314.06.Ç – 80L/4 4
52.307.06.Ç – 90S/6 1
64 91 2.2 52.308.06.Ç – 90S/6 15 2 36/37
52.309.06.Ç – 90S/6 3
52.314.06.Ç – 90S/6 4
52.507.05.Ç – 80L/4 1
47 105 0.9 52.508.05.Ç – 80L/4 30 2 36/37
52.509.05.Ç – 80L/4 3
52.514.05.Ç – 80L/4 4
Design
Lenze 25
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
0.75 kW 52.307.06.Ç – 80L/4

52.308.06.Ç – 80L/4
1
2
47 107 1.6 30 36/37
52.309.06.Ç – 80L/4 3
52.314.06.Ç – 80L/4 4
52.507.05.Ç – 80L/4 1
36 128 0.8 52.508.05.Ç – 80L/4 40 2 36/37
52.509.05.Ç – 80L/4 3
52.514.05.Ç – 80L/4 4
52.307.06.Ç – 80L/4 1
35 136 1.4 52.308.06.Ç – 80L/4 40 2 36/37
52.309.06.Ç – 80L/4 3
52.314.06.Ç – 80L/4 4
52.307.08.Ç – 80L/4 1
34 148 2.2 52.308.08.Ç – 80L/4 40 2 36/37
52.309.08.Ç – 80L/4 3
52.314.08.Ç – 80L/4 4
52.307.06.Ç – 80L/4 1
27 167 1.3 52.308.06.Ç – 80L/4 53 2 36/37
52.309.06.Ç – 80L/4 3
52.314.06.Ç – 80L/4 4
52.307.08.Ç – 80L/4 1
26 185 2.0 52.308.08.Ç – 80L/4 53 2 36/37
52.309.08.Ç – 80L/4 3
52.314.08.Ç – 80L/4 4
52.307.06.Ç – 90S/6 1
23 197 1.2 52.308.06.Ç – 90S/6 40 2 36/37
52.309.06.Ç – 90S/6 3
52.314.06.Ç – 90S/6 4
52.307.06.Ç – 80L/4 1
22 175 1.0 52.308.06.Ç – 80L/4 60 2 36/37
52.309.06.Ç – 80L/4 3
52.314.06.Ç – 80L/4 4
52.307.08.Ç – 80L/4 1
22 191 1.6 52.308.08.Ç – 80L/4 60 2 36/37
52.309.08.Ç – 80L/4 3
52.314.08.Ç – 80L/4 4
52.307.06.Ç – 90S/6 1
18 242 1.0 52.308.06.Ç – 90S/6 53 2 36/37
52.309.06.Ç – 90S/6 3
52.314.06.Ç – 90S/6 4
52.307.08.Ç – 90S/6 1
17 263 1.6 52.308.08.Ç – 90S/6 53 2 36/37
52.309.08.Ç – 90S/6 3
52.314.08.Ç – 90S/6 4
52.307.08.Ç – 90S/6 1
15 273 1.3 52.308.08.Ç – 90S/6 60 2 36/37
52.309.08.Ç – 90S/6 3
52.314.08.Ç – 90S/6 4
1.1 kW 52.307.06.Ç – 90S/4

52.308.06.Ç – 90S/4
1
2
289 33 4.1 5 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
26 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
1.1 kW 52.307.06.Ç – 90S/4

52.308.06.Ç – 90S/4
1
2
193 49 3.1 7 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
52.307.06.Ç – 90S/4 1
143 65 2.7 52.308.06.Ç – 90S/4 10 2 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
52.307.06.Ç – 90L/6 1
128 73 2.5 52.308.06.Ç – 90L/6 7 2 36/37
52.309.06.Ç – 90L/6 3
52.314.06.Ç – 90L/6 4
52.307.06.Ç – 90S/4 1
96 90 1.8 52.308.06.Ç – 90S/4 15 2 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
52.307.06.Ç – 90S/4 1
71 117 1.6 52.308.06.Ç – 90S/4 20 2 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
52.307.06.Ç – 90L/6 1
64 133 1.5 52.308.06.Ç – 90L/6 15 2 36/37
52.309.06.Ç – 90L/6 3
52.314.06.Ç – 90L/6 4
52.307.06.Ç – 90S/4 1
48 155 1.1 52.308.06.Ç – 90S/4 30 2 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
52.307.08.Ç – 90S/4 1
46 167 1.8 52.308.08.Ç – 90S/4 30 2 36/37
52.309.08.Ç – 90S/4 3
52.314.08.Ç – 90S/4 4
52.307.06.Ç – 90S/4 1
35 197 1.0 52.308.06.Ç – 90S/4 40 2 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
52.307.08.Ç – 90S/4 1
35 214 1.5 52.308.08.Ç – 90S/4 40 2 36/37
52.309.08.Ç – 90S/4 3
52.314.08.Ç – 90S/4 4
52.307.06.Ç – 90L/6 1
32 227 0.9 52.308.06.Ç – 90L/6 30 2 36/37
52.309.06.Ç – 90L/6 3
52.314.06.Ç – 90L/6 4
52.307.08.Ç – 90L/6 1
31 244 1.4 52.308.08.Ç – 90L/6 30 2 36/37
52.309.08.Ç – 90L/6 3
52.314.08.Ç – 90L/6 4
Design
Lenze 27
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
1.1 kW 52.307.06.Ç – 90S/4

52.308.06.Ç – 90S/4
1
2
27 242 0.9 53 36/37
52.309.06.Ç – 90S/4 3
52.314.06.Ç – 90S/4 4
52.107.10.Ç – 90S/4 1
26 278 2.1 52.108.10.Ç – 90S/4 53 2 36/37
52.109.10.Ç – 90S/4 3
52.114.10.Ç – 90S/4 4
52.307.08.Ç – 90S/4 1
26 268 1.4 52.308.08.Ç – 90S/4 53 2 36/37
52.309.08.Ç – 90S/4 3
52.314.08.Ç – 90S/4 4
52.307.08.Ç – 90S/4 1
22 276 1.1 52.308.08.Ç – 90S/4 60 2 36/37
52.309.08.Ç – 90S/4 3
52.314.08.Ç – 90S/4 4
52.107.10.Ç – 90S/4 1
22 295 1.6 52.108.10.Ç – 90S/4 60 2 36/37
52.109.10.Ç – 90S/4 3
52.114.10.Ç – 90S/4 4
1.5 kW 52.307.06.Ç – 90L/4

52.308.06.Ç – 90L/4
1
2
293 45 3.1 5 36/37
52.309.06.Ç – 90L/4 3
52.314.06.Ç – 90L/4 4
52.307.06.Ç – 90L/4 1
195 66 2.3 52.308.06.Ç – 90L/4 7 2 36/37
52.309.06.Ç – 90L/4 3
52.314.06.Ç – 90L/4 4
52.307.06.Ç – 90L/4 1
145 87 2.0 52.308.06.Ç – 90L/4 10 2 36/37
52.309.06.Ç – 90L/4 3
52.314.06.Ç – 90L/4 4
52.307.06.Ç – 90L/4 1
97 121 1.4 52.308.06.Ç – 90L/4 15 2 36/37
52.309.06.Ç – 90L/4 3
52.314.06.Ç – 90L/4 4
52.307.08.Ç – 90L/4 1
94 129 2.2 52.308.08.Ç – 90L/4 15 2 36/37
52.309.08.Ç – 90L/4 3
52.314.08.Ç – 90L/4 4
52.307.06.Ç – 90L/4 1
72 158 1.2 52.308.06.Ç – 90L/4 20 2 36/37
52.309.06.Ç – 90L/4 3
52.314.06.Ç – 90L/4 4
52.307.08.Ç – 90L/4 1
71 167 1.9 52.308.08.Ç – 90L/4 20 2 36/37
52.309.08.Ç – 90L/4 3
52.314.08.Ç – 90L/4 4
52.307.06.Ç – 90L/4 1
48 209 0.8 52.308.06.Ç – 90L/4 30 2 36/37
52.309.06.Ç – 90L/4 3
52.314.06.Ç – 90L/4 4
28 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
1.5 kW 52.107.10.Ç – 190L/4

52.108.10.Ç – 190L/4
1
2
47 228 1.8 30 36/37
52.109.10.Ç – 190L/4 3
52.114.10.Ç – 190L/4 4
52.307.08.Ç – 190L/4 1
47 225 1.3 52.308.08.Ç – 190L/4 30 2 36/37
52.309.08.Ç – 190L/4 3
52.314.08.Ç – 190L/4 4
52.307.08.Ç – 190L/4 1
35 288 1.1 52.308.08.Ç – 190L/4 40 2 36/37
52.309.08.Ç – 190L/4 3
52.314.08.Ç – 190L/4 4
52.107.10.Ç – 190L/4 1
35 300 1.8 52.108.10.Ç – 190L/4 40 2 36/37
52.109.10.Ç – 190L/4 3
52.114.10.Ç – 190L/4 4
52.307.08.Ç – 100L/6 1
31 332 1.0 52.308.08.Ç – 100L/6 30 2 36/37
52.309.08.Ç – 100L/6 3
52.314.08.Ç – 100L/6 4
52.107.10.Ç – 100L/6 1
31 336 1.4 52.108.10.Ç – 100L/6 30 2 36/37
52.109.10.Ç – 100L/6 3
52.114.10.Ç – 100L/6 4
52.107.10.Ç – 190L/4 1
27 374 1.5 52.108.10.Ç – 190L/4 53 2 36/37
52.109.10.Ç – 190L/4 3
52.114.10.Ç – 190L/4 4
52.307.08.Ç – 190L/4 1
26 360 1.0 52.308.08.Ç – 190L/4 53 2 36/37
52.309.08.Ç – 190L/4 3
52.314.08.Ç – 190L/4 4
52.107.10.Ç – 190L/4 1
22 397 1.2 52.108.10.Ç – 190L/4 60 2 36/37
52.109.10.Ç – 190L/4 3
52.114.10.Ç – 190L/4 4
52.107.10.Ç – 100L/6 1
18 552 1.2 52.108.10.Ç – 100L/6 53 2 36/37
52.109.10.Ç – 100L/6 3
52.114.10.Ç – 100L/6 4
52.107.10.Ç – 100L/6 1
15 582 1.0 52.108.10.Ç – 100L/6 60 2 36/37
52.109.10.Ç – 100L/6 3
52.114.10.Ç – 100L/6 4
2.2 kW 52.307.08.Ç – 100L/4

52.308.08.Ç – 100L/4
1
2
141 133 2.2 10 36/37
52.309.08.Ç – 100L/4 3
52.314.08.Ç – 100L/4 4
Design
Lenze 29
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
2.2 kW 52.307.08.Ç – 112M/6

52.308.08.Ç – 112M/6
1
2
128 149 2.0 7 36/37
52.309.08.Ç – 112M/6 3
52.314.08.Ç – 112M/6 4
52.307.08.Ç – 100M/4 1
94 190 1.5 52.308.08.Ç – 100M/4 15 2 36/37
52.309.08.Ç – 100M/4 3
52.314.08.Ç – 100M/4 4
52.107.10.Ç – 100M/4 1
94 193 2.3 52.108.10.Ç – 100M/4 15 2 36/37
52.109.10.Ç – 100M/4 3
52.114.10.Ç – 100M/4 4
52.107.10.Ç – 100M/4 1
70 252 2.0 52.108.10.Ç – 100M/4 20 2 36/37
52.109.10.Ç – 100M/4 3
52.114.10.Ç – 100M/4 4
52.307.08.Ç – 100M/4 1
70 246 1.3 52.308.08.Ç – 100M/4 20 2 36/37
52.309.08.Ç – 100M/4 3
52.314.08.Ç – 100M/4 4
52.307.08.Ç – 112M/6 1
64 275 1.2 52.308.08.Ç – 112M/6 15 2 36/37
52.309.08.Ç – 112M/6 3
52.314.08.Ç – 112M/6 4
52.107.12.Ç – 100M/4 1
48 344 2.2 52.108.12.Ç – 100M/4 30 2 36/37
52.109.12.Ç – 100M/4 3
52.114.12.Ç – 100M/4 4
52.107.10.Ç – 112M/6 1
48 366 1.6 52.108.10.Ç – 112M/6 20 2 36/37
52.109.10.Ç – 112M/6 3
52.114.10.Ç – 112M/6 4
52.307.08.Ç – 100M/4 1
47 331 0.9 52.308.08.Ç – 100M/4 30 2 36/37
52.309.08.Ç – 100M/4 3
52.314.08.Ç – 100M/4 4
52.107.10.Ç – 100M/4 1
47 336 1.2 52.108.10.Ç – 100M/4 30 2 36/37
52.109.10.Ç – 100M/4 3
52.114.10.Ç – 100M/4 4
52.107.12.Ç – 100M/4 1
35 463 2.0 52.108.12.Ç – 100M/4 40 2 36/37
52.109.12.Ç – 100M/4 3
52.114.12.Ç – 100M/4 4
52.107.10.Ç – 100M/4 1
35 442 1.2 52.108.10.Ç – 100M/4 40 2 36/37
52.109.10.Ç – 100M/4 3
52.114.10.Ç – 100M/4 4
52.107.12.Ç – 100M/4 1
27 579 1.8 52.108.12.Ç – 100M/4 53 2 36/37
52.109.12.Ç – 100M/4 3
52.114.12.Ç – 100M/4 4
30 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
2.2 kW 52.107.10.Ç – 100M/4

52.108.10.Ç – 100M/4
1
2
27 551 1.0 53 36/37
52.109.10.Ç – 100M/4 3
52.114.10.Ç – 100M/4 4
52.107.12.Ç – 100M/4 1
22 616 1.4 52.108.12.Ç – 100M/4 60 2 36/37
52.109.12.Ç – 100M/4 3
52.114.12.Ç – 100M/4 4
52.107.10.Ç – 112M/6 1
18 794 0.8 52.108.10.Ç – 112M/6 53 2 36/37
52.109.10.Ç – 112M/6 3
52.114.10.Ç – 112M/6 4
52.107.12.Ç – 112M/6 1
18 839 1.5 52.108.12.Ç – 112M/6 53 2 36/37
52.109.12.Ç – 112M/6 3
52.114.12.Ç – 112M/6 4
52.107.12.Ç – 112M/6 1
15 892 1.1 52.108.12.Ç – 112M/6 60 2 36/37
52.109.12.Ç – 112M/6 3
52.114.12.Ç – 112M/6 4
3.0 kW 52.307.08.Ç – 100L /4

52.308.08.Ç – 100L /4
1
2
280 96 2.4 5 36/37
52.309.08.Ç – 100L /4 3
52.314.08.Ç – 100L /4 4
52.307.08.Ç – 100L /4 1
186 139 1.9 52.308.08.Ç – 100L /4 7 2 36/37
52.309.08.Ç – 100L /4 3
52.314.08.Ç – 100L /4 4
52.307.08.Ç – 100L /4 1
140 184 1.6 52.308.08.Ç – 100L /4 10 2 36/37
52.309.08.Ç – 100L /4 3
52.314.08.Ç – 100L /4 4
52.307.08.Ç – 100L /4 1
93 262 1.1 52.308.08.Ç – 100L /4 15 2 36/37
52.309.08.Ç – 100L /4 3
52.314.08.Ç – 100L /4 4
52.107.10.Ç – 100L /4 1
93 267 1.7 52.108.10.Ç – 100L /4 15 2 36/37
52.109.10.Ç – 100L /4 3
52.114.10.Ç – 100L /4 4
52.107.10.Ç – 100L /4 1
70 347 1.5 52.108.10.Ç – 100L /4 20 2 36/37
52.109.10.Ç – 100L /4 3
52.114.10.Ç – 100L /4 4
52.307.08.Ç – 100L /4 1
70 339 0.9 52.308.08.Ç – 100L /4 20 2 36/37
52.309.08.Ç – 100L /4 3
52.314.08.Ç – 100L /4 4
Design
Lenze 31
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
3.0 kW 52.107.12.Ç – 100L /4

52.108.12.Ç – 100L /4
1
2
48 474 1.6 30 36/37
52.109.12.Ç – 100L /4 3
52.114.12.Ç – 100L /4 4
52.107.10.Ç – 100L /4 1
46 463 0.9 52.108.10.Ç – 100L /4 30 2 36/37
52.109.10.Ç – 100L /4 3
52.114.10.Ç – 100L /4 4
52.107.12.Ç – 100L /4 1
35 638 1.4 52.108.12.Ç – 100L /4 40 2 36/37
52.109.12.Ç – 100L /4 3
52.114.12.Ç – 100L /4 4
52.107.10.Ç – 100L /4 1
35 609 0.9 52.108.10.Ç – 100L /4 40 2 36/37
52.109.10.Ç – 100L /4 3
52.114.10.Ç – 100L /4 4
52.107.12.Ç – 132S /6 1
32 711 1.4 52.108.12.Ç – 132S /6 30 2 36/37
52.109.12.Ç – 132S /6 3
52.114.12.Ç – 132S /6 4
52.107.12.Ç – 100L /4 1
26 798 1.3 52.108.12.Ç – 100L /4 53 2 36/37
52.109.12.Ç – 100L /4 3
52.114.12.Ç – 100L /4 4
52.107.12.Ç – 100L /4 1
22 850 1.0 52.108.12.Ç – 100L /4 60 2 36/37
52.109.12.Ç – 100L /4 3
52.114.12.Ç – 100L /4 4
4.0 kW 52.307.08.Ç – 112M/4

52.308.08.Ç – 112M/4
1
2
286 125 1.9 5 36/37
52.309.08.Ç – 112M/4 3
52.314.08.Ç – 112M/4 4
52.307.08.Ç – 112M/4 1
190 182 1.4 52.308.08.Ç – 112M/4 7 2 36/37
52.309.08.Ç – 112M/4 3
52.314.08.Ç – 112M/4 4
52.107.10.Ç – 112M/4 1
190 186 2.2 52.108.10.Ç – 112M/4 7 2 36/37
52.109.10.Ç – 112M/4 3
52.114.10.Ç – 112M/4 4
52.307.08.Ç – 112M/4 1
143 240 1.2 52.308.08.Ç – 112M/4 10 2 36/37
52.309.08.Ç – 112M/4 3
52.314.08.Ç – 112M/4 4
52.107.10.Ç – 112M/4 1
143 243 1.9 52.108.10.Ç – 112M/4 10 2 36/37
52.109.10.Ç – 112M/4 3
52.114.10.Ç – 112M/4 4
52.107.12.Ç – 112M/4 1
98 344 2.2 52.108.12.Ç – 112M/4 15 2 36/37
52.109.12.Ç – 112M/4 3
52.114.12.Ç – 112M/4 4
32 Lenze
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
4.0 kW 52.107.10.Ç – 112M/4

52.108.10.Ç – 112M/4
1
2
95 348 1.3 15 36/37
52.109.10.Ç – 112M/4 3
52.114.10.Ç – 112M/4 4
52.307.08.Ç – 112M/4 1
95 342 0.8 52.308.08.Ç – 112M/4 15 2 36/37
52.309.08.Ç – 112M/4 3
52.314.08.Ç – 112M/4 4
52.107.12.Ç – 112M/4 1
71 464 1.9 52.108.12.Ç – 112M/4 20 2 36/37
52.109.12.Ç – 112M/4 3
52.114.12.Ç – 112M/4 4
52.107.10.Ç – 112M/4 1
71 454 1.1 52.108.10.Ç – 112M/4 20 2 36/37
52.109.10.Ç – 112M/4 3
52.114.10.Ç – 112M/4 4
52.107.12.Ç – 132M/6 1
66 512 1.8 52.108.12.Ç – 132M/6 15 2 36/37
52.109.12.Ç – 132M/6 3
52.114.12.Ç – 132M/6 4
52.107.12.Ç – 112M/4 1
49 619 1.2 52.108.12.Ç – 112M/4 30 2 36/37
52.109.12.Ç – 112M/4 3
52.114.12.Ç – 112M/4 4
52.107.12.Ç – 132M/6 1
48 690 1.6 52.108.12.Ç – 132M/6 20 2 36/37
52.109.12.Ç – 132M/6 3
52.114.12.Ç – 132M/6 4
52.107.12.Ç – 112M/4 1
35 833 1.1 52.108.12.Ç – 112M/4 40 2 36/37
52.109.12.Ç – 112M/4 3
52.114.12.Ç – 112M/4 4
52.107.12.Ç – 112M/4 1
27 1041 1.0 52.108.12.Ç – 112M/4 53 2 36/37
52.109.12.Ç – 112M/4 3
52.114.12.Ç – 112M/4 4
5.5 kW 52.107.12.Ç – 132S /4

52.108.12.Ç – 132S /4
1
2
198 245 2.7 7 36/37
52.109.12.Ç – 132S /4 3
52.114.12.Ç – 132S /4 4
52.107.12.Ç – 132S /4 1
144 339 2.4 52.108.12.Ç – 132S /4 10 2 36/37
52.109.12.Ç – 132S /4 3
52.114.12.Ç – 132S /4 4
52.107.12.Ç – 132S /4 1
99 470 1.6 52.108.12.Ç – 132S /4 15 2 36/37
52.109.12.Ç – 132S /4 3
52.114.12.Ç – 132S /4 4
Design
Lenze 33
Worm geared motors
Drive selection
Selection table
P1 Motor power
n2 Output speed
M2 Output torque
cs Operating factor

n2 M2
[1/min] [Nm]
(see page 16)
5.5 kW 52.107.12.Ç – 132S /4

52.108.12.Ç – 132S /4
1
2
72 634 1.4 20 36/37
52.109.12.Ç – 132S /4 3
52.114.12.Ç – 132S /4 4
52.107.12.Ç – 132S /4 1
49 846 0.9 52.108.12.Ç – 132S /4 30 2 36/37
52.109.12.Ç – 132S /4 3
52.114.12.Ç – 132S /4 4
7.5 kW 52.107.12.Ç – 132M/4

52.108.12.Ç – 132M/4
1
2
200 333 2.0 7 36/37
52.109.12.Ç – 132M/4 3
52.114.12.Ç – 132M/4 4
52.107.12.Ç – 132M/4 1
145 459 1.7 52.108.12.Ç – 132M/4 10 2 36/37
52.109.12.Ç – 132M/4 3
52.114.12.Ç – 132M/4 4
52.107.12.Ç – 132M/4 1
100 637 1.2 52.108.12.Ç – 132M/4 15 2 36/37
52.109.12.Ç – 132M/4 3
52.114.12.Ç – 132M/4 4
52.107.12.Ç – 132M/4 1
72 859 1.0 52.108.12.Ç – 132M/4 20 2 36/37
52.109.12.Ç – 132M/4 3
52.114.12.Ç – 132M/4 4
34 Lenze
Lenze 35
Worm geared motors
Drive selection
Dimensions
52.307/52.507 52.107/52.407
The output shaft can also be supplied

double ended at a surcharge.
52.308/52.508 52.108/52.408
The output shaft can also be supplied

52.309/52.509 52.109/52.409
36 Lenze
Worm geared motors
Drive selection
Dimensions
52.314 / 52.514 52.114 / 52.414
Size a a1 4) a2 a3 a4 a5 b1 2) b2 c1 d2 1) d3 d4 d6 e1 f1 g1 g2 i1 i2
j7 H7
04 140 120/140 185 20 105 139 180/195 153 18/18 19 20 35 M 16 100/115 .53/3.5 176 149 150 29
05 150 140/160 104 25 129 152 195/110 166 10/10 24 25 45 M 18 115/130 .53/3.5 188 159 160 39
06 163 160/200 124 35 159 162 110/130 182 12/12 28 30 55 M 10 130/165 3.5/3.5 105 167 170 40
08 180 200/250 148 40 188 174 130/180 199 14/14 38 40 65 M 12 165/215 3.5/4.5 130 182 180 54
10 100 250/300 176 50 226 188 180/230 120 16/16 48 50 75 M 16 215/265 .54/4.5 138 187 100 59
12 125 300/350 224 59 283 112 230/250 150 20/20 55 70 90 M 20 265/300 .54/5.5 174 105 110 68
m5)
Size Motor g5 5) g6 5) g7 k4 k5 5) k6 5) l2 l3 p1 p2 q1 q2 q3 s s1 t1 t2 [kg]
52.Ç 07 52.Ç 08 52.Ç 09 52.Ç 14
163S 112 123 140 119 187 371 150 187 35 151 100 50 122 M 16 6.6/9 10 7.5 113 113 112 113
04 171S 125 138 160 119 212 396 150 187 35 151 100 50 122 M 16 6.6/9 10 7.5 115 115 114 115
180S 137 156 200 129 233 427 150 187 35 151 100 50 122 M 16 6.6/9 10 7.5 118 118 117 118
05 171S 125 138 160 125 212 410 160 104 40 162 120 60 149 M 18 9/9 13 10 119 121 118 120
180S 137 156 200 135 233 441 160 104 40 162 120 60 149 M 18 9/9 13 10 122 124 121 123
180S 137 156 200 120 233 441 170 122 50 175 140 70 172 M 10 19/11 13 13 130 133 129 132
06 190S 147 176 200 120 250 458 170 122 50 175 140 70 172 M 10 19/11 13 13 137 140 136 139
190L 147 176 200 120 275 483 170 122 50 175 140 70 172 M 10 19/11 13 13 141 144 140 143
180S 137 156 200 146 233 482 180 148 55 190 165 85 207 M 10 11/14 19 16 142 148 141 147
190S 147 176 200 146 250 499 180 148 55 190 165 85 207 M 10 11/14 19 16 150 156 149 155
08 190L 147 176 200 146 275 524 180 148 55 190 165 85 207 M 10 11/14 19 16 154 160 153 159
100S 156 198 250 146 306 555 180 148 55 190 165 85 207 M 10 11/14 19 16 157 163 156 162
112S 167 220 250 146 322 571 180 148 55 190 165 85 207 M 10 11/14 19 16 173 179 172 178
190L 147 176 200 153 275 546 100 154 65 110 190 90 234 M 12 14/14 18 18 165 174 168 172
106) 100S 156 198 250 163 306 587 100 154 65 110 190 90 234 M 12 14/14 18 18 168 177 171 175
112S 167 220 250 163 322 603 100 154 65 110 190 90 234 M 12 14/14 18 18 184 193 187 191
100S 156 198 250 195 306 647 110 187 72 141 218 107.5 272 M 16 14/18 23 23 115 122 110 119
126) 112S 167 220 250 195 322 663 110 187 72 141 218 107.5 272 M 16 14/18 23 23 131 138 126 135
132S 195 260 300 203 363 712 110 187 72 141 218 107.5 272 M 16 14/18 23 23 150 157 145 154
132M 195 260 300 203 401 750 110 187 72 141 218 107.5 272 M 16 14/18 23 23 161 168 156 165
1) ISO tolerance up to Ø 50 mm = k6
ISO tolerance over Ø 50 mm = m6
2) ISO tolerance h7 for b1 over 230 mm
4) Bold print = standard
5) Deviations in motor dimensions possible
6) Sizes 10 and 12 not available as type 52.307 / 308 / 309 / 314
Keys to DIN 6885/1
For motor dimensions see page 50
For brake motors, see the different dimensions and weights
according to page 10.
Dimensions in [mm]
Lenze 37
Worm geared motors
Drive selection
Options
Angular foot for mounting position Side foot for mounting position
11/12/15/16/21/22/25/26 13/14/23/24
Page 2 Page 1
Rigid torque plate 1) Torque plate with flexible insert 2)

output covers with centring 2) (only hollow shaft design) shaft cover 2) (please indicate which side)
Size a a1 a2 a3 a4 b b1 b2 b4 c c1 c2 c3 d3 e e1 e2
j7
04 118 118 096 130 099 098 157 065 062 11 14 5 41 60 140 142 085
05 152 152 107 155 115 114 191 083 075 14 14 6 41 60 180 178 100
06 174 174 132 195 148 136 225 095 094 17 17 6 41 60 205 206 128
08 212 212 154 220 177 166 268 114 130 19 19 6 46 70 245 248 158
10 240 240 188 275 215 194 310 130 154 22 22 6 46 70 280 284 195
12 300 300 226 339 278 235 375 158 215 25 25 6 70 85 350 350 252
Size f f1 f2 g2 g3 h h1 h2 h3 h4 h5 m m1 n n1 s s1 s2 s3 s4 t2
04 122 181 2.5 45.5 157 194 164 43 150 167 171 35 36 21 46 10 10 10.5 18 M16 18
05 146 217 3.0 54.0 169 108 170 50 160 183 183 44 51 27 54 10 10 12.5 18 M16 11
06 175 257 2.0 62.5 179 135 183 59 170 100 100 48 54 32 62 12 12 16.5 18 M16 12
08 200 304 2.5 77.0 195 161 198 71 185 121 121 58 65 32 73 14 14 16.5 25 M18 15
10 234 354 2.8 83.7 199 200 109 75 190 150 150 63 67 40 77 18 18 20.5 25 M10 15
12 286 425 3.0 99.5 120 245 127 93 108 186 186 67 79 48 87 22 22 20.5 30 M12 22
1) no surcharge 2) surcharge Dimensions in [mm]
38 Lenze
Worm gearboxes
Product information Selection worm geared motors

Illustrations ______________________________________ 40 Selection _______________________________________ 44
Type code _______________________________________ 41
Drive selection
Technical data Selection tables _________________________________ 46
Dimensions _____________________________________ 48
Mounting positions ______________________________ 42 Options gearbox (see chapter geared motors) _______ 38
Permissible radial forces input ___________________ 43
Lenze 39
Worm gearboxes
Product information
Illustrations
52.104 52.106
52.105 52.113
40 Lenze
Worm gearboxes
Product information
Type code
Type
Gearbox size
Mounting position
52.104.05.12
Type
Type
Design on output side Worm gearboxes
Foot mounted design 52.104
Flange mounted design 52.105
Hollow shaft design 52.106
Flange/Hollow shaft design 52.113
Gearbox size
04, 05, 06, 08, 10, 12
Order information
– Complete type code
– Ratio
– Mounting position
– Flange design: Output flange diameter
– Hollow shaft design: hollow shaft bore
– Gearbox design with motor adapter: size of
the motor flange
– Gearbox options
Lenze 41
Worm gearboxes
Technical data
Mounting positions
with output shaft end with output flange
10 20 10 20
with hollow shaft

For output flange and hollow shaft the
mounting position of the flange-mounted
11 21 design applies.
00
12 22
13 23
14 24
15 25
16 26
42 Lenze
Worm gearboxes
Technical data
Permissible radial forces input
Frperm = Fr · fw
x/l 0 0.2 0.4 0.6 0.8 1

fw 1.2 1.1 1.04 0.9 0.77 0.65
Size 04 05 06 08 10 12 04 05 06 08 10 12 04 05 06 08 10 12
Radial force Fr1 [kN]

i n1 = 2800 1/min n1 = 1400 1/min n1 = 930 1/min
05 1.00 1.90 2.75 3.9 5.5 8.2 1.05 1.90 2.75 3.8 5.5 8.2 1.00 1.80 2.75 3.8 5.5 8.2
07 1.00 1.90 2.75 3.9 5.6 8.2 1.05 1.90 2.75 3.9 5.5 8.2 0.85 1.90 2.75 3.8 5.5 8.2
10 0.80 1.55 2.65 3.9 5.6 8.2 0.80 1.90 2.40 3.7 5.5 8.0 1.05 1.75 2.20 3.5 5.5 7.4
13 1.10 1.95 1.45 3.9 4.0 4.6 1.10 1.95 1.25 3.9 3.2 3.7 1.10 1.95 1.10 3.9 3.0 3.2
15 1.00 1.70 2.75 3.9 5.6 8.2 1.00 1.80 2.75 3.9 5.6 8.2 0.50 1.75 2.75 3.9 5.6 8.2
20 0.65 1.40 2.75 3.9 5.6 8.2 0.50 1.70 2.50 3.7 5.6 8.1 0.50 1.35 2.30 3.6 5.5 7.5
26 1.10 1.95 1.55 3.9 4.0 4.6 1.10 1.95 1.30 3.9 3.3 3.8 1.10 1.95 1.05 3.9 3.1 3.4
30 0.80 1.30 2.75 3.9 5.6 8.2 0.65 1.80 2.75 3.9 5.6 8.2 0.50 1.55 2.75 3.9 5.6 8.2
40 0.50 1.25 2.75 3.9 5.6 8.2 0.50 1.50 2.50 3.7 5.6 8.1 0.50 1.25 2.30 3.6 5.5 7.5
53 0.80 1.25 1.55 3.9 4.0 4.6 1.10 1.95 1.30 3.9 3.3 3.8 1.10 1.95 1.05 3.9 3.1 3.4
60 0.75 1.25 2.75 3.9 5.6 8.2 1.10 1.95 2.75 3.9 5.6 8.2 1.10 1.95 2.75 3.9 5.6 8.2
i n1 = 700 1/min n1 = 500 1/min n1 = 150 1/min
05 1.00 1.85 2.75 3.8 5.5 8.2 1.00 1.80 2.75 3.8 5.5 8.1 1.00 1.80 2.65 3.7 5.1 7.7
07 0.95 1.75 2.75 3.8 5.5 8.2 0.95 1.30 2.75 3.8 5.5 8.2 1.00 1.80 2.70 3.8 5.3 8.0
10 1.05 1.35 2.00 3.2 5.0 6.8 1.05 1.60 1.75 2.9 4.5 5.9 1.05 1.60 1.70 2.4 2.7 3.3
13 1.10 1.95 1.10 3.9 2.5 2.6 1.10 1.95 1.10 3.9 2.5 2.6 1.10 1.95 1.10 3.9 2.5 2.6
15 0.50 1.35 2.75 3.9 5.5 8.2 1.00 1.25 2.75 3.9 5.5 8.2 1.00 1.85 2.75 3.8 5.5 8.2
20 1.00 1.25 2.10 3.4 5.2 6.8 1.05 1.55 1.90 3.0 4.7 6.2 1.00 1.60 1.80 2.6 3.2 4.3
26 1.10 1.95 0.95 3.9 2.7 2.8 1.10 1.95 0.95 3.9 2.1 2.2 1.10 1.95 0.90 3.9 2.1 2.2
30 0.50 1.25 2.75 3.9 5.6 8.2 1.00 1.25 2.75 3.9 5.6 8.2 1.00 1.85 2.75 3.9 5.5 8.2
40 0.75 1.25 2.10 3.4 5.2 7.0 1.05 1.35 2.00 3.1 4.8 6.5 1.05 1.60 1.85 2.6 3.4 4.9
53 1.10 1.95 0.95 3.9 2.8 2.9 1.10 1.95 0.95 3.9 2.2 2.3 1.10 1.95 0.80 3.9 2.0 2.0
60 1.10 1.95 2.75 3.9 5.6 8.2 1.10 1.95 2.75 3.9 5.6 8.2 1.10 1.95 2.75 3.9 5.6 8.2
Lenze 43
Worm gearboxes
Selection
Selection
A worm gearbox can be selected according to the rated
power (P) or the torque required by the machine (M).
Selection according to the torque:
M = 9550
n
·P
2
M = Required torque at the machine in Nm For the desired input speed n1 and ratio i, the gearbox
P = Required power at the machine in kW output torque M2 (selection table) must at least as great as
n2 = Speed at the machine in 1/min the greater of the two torques Mm or Mw.
= Output speed of the gearbox
M2 Mm = M · kA
M2 Mw = M · kT
M2 = Output torque according to selection table

Mm = Calculated mechanical output torque in Nm
Mw = Calculated thermic output torque in Nm
kA = Factor according to table page 18
kT = Factor according to table page 18
44 Lenze
Worm gearboxes
Selection
Selection
Selection according to the required power:
The power (P) required by the machine is calculated using
the following equations:
Pm = P · kA
Pw = P · kT
For the greater of the two powers Pm or Pw, check if:
P
P1 m
P
P1 w
Pm = calculated mechanical output power in kW Considering the output speed n1 and the desired ratio i,
Pw = calculated thermic power in kW the value can be obtained from the selection table.
P1 = Input power in kW
kA = Factor according to table page 18
KT = Factor according to table page 18
Lenze 45
Worm gearboxes
Drive selection
Selection table
P1 = Input power
M2 = Output torque
= Efficiency
n1 = Input speed
i = Ratio of the gearbox
n1 2800 1/min 1400 1/min 930 1/min
Size 04 05 06 08 10 12 04 05 06 08 10 12 04 05 06 08 10 12
P1 [kW]
i M2 [Nm]
[%]
2.81 3.97 6.02 8.70 12.59 21.8 1.77 2.62 4.51 7.40 11.39 18.9 1.47 2.18 3.54 5.50 8.75 16.6
5 43 61 92 138 201 338 53 79 138 236 366 593 66 99 162 262 422 784
93 93 93 93 94 94 91 91 93 94 94 95 90 92 92 93 94 95
2.11 3.02 4.60 6.75 9.77 16.6 1.34 1.97 3.39 5.63 8.84 14.4 1.12 1.65 2.67 4.19 6.66 12.4
7 47 68 103 157 229 380 59 87 152 263 419 665 72 109 178 293 472 862
90 91 91 91 92 93 89 89 91 91 93 93 88 89 90 91 92 93
1.89 2.64 4.18 6.03 8.80 14.7 1.13 1.69 2.91 4.80 7.55 12.7 0.75 1.42 2.29 3.58 5.67 10.3
10 57 77 125 185 272 457 67 96 172 295 471 805 66 120 201 327 528 976
88 89 90 90 91 91 87 88 89 90 91 93 86 87 88 89 91 92
0.90 1.45 3.64 5.42 7.94 13.3 0.45 0.74 2.49 4.08 6.53 11.0 0.30 0.49 1.85 3.03 4.90 8.88
13 *) 34 57 139 218 316 536 34 56 188 326 521 892 33 55 207 360 583 1077
85 87 88 89 90 90 84 83 87 88 90 91 81 83 85 87 89 91
1.23 1.78 2.71 4.00 5.77 9.73 0.79 1.16 1.99 3.29 5.12 8.38 0.65 0.98 1.58 2.47 3.88 7.12
15 50 74 113 174 253 420 63 94 164 288 458 736 76 118 193 321 516 940
82 84 84 85 86 87 81 82 83 86 87 89 78 81 82 84 86 89
0.97 1.55 2.49 3.58 5.25 8.70 0.66 1.01 1.73 2.83 4.44 7.42 0.52 0.85 1.37 2.12 3.36 6.03
20 54 82 137 203 302 508 71 104 186 320 516 883 82 129 218 356 580 1072
81 82 83 83 84 86 79 79 81 83 85 87 77 78 79 82 84 87
0.64 1.07 2.16 3.25 4.73 7.87 0.33 0.55 1.50 2.44 3.85 6.47 0.23 0.37 1.19 1.83 2.91 5.25
26 *) 44 76 150 240 347 588 44 75 203 355 567 979 43 74 237 392 635 1184
78 79 80 82 83 84 74 75 78 80 83 85 70 74 76 79 82 84
0.65 0.96 1.51 2.35 3.10 5.19 0.47 0.69 1.18 1.92 2.70 4.78 0.38 0.59 0.95 1.46 2.06 4.05
30 46 69 109 179 233 396 64 96 168 295 419 759 76 121 197 329 472 966
71 73 73 74 73 77 69 70 72 75 76 80 67 69 70 73 74 80
0.52 0.86 1.37 2.13 3.10 4.66 0.39 0.62 1.05 1.68 2.60 4.26 0.31 0.52 0.84 1.28 1.98 3.49
40 48 77 129 208 312 475 70 106 191 328 531 906 80 129 223 365 597 1100
69 69 71 72 74 75 66 66 68 72 75 78 63 64 66 69 73 77
0.43 0.64 1.22 1.91 2.82 4.20 0.23 0.38 0.93 1.48 2.29 3.78 0.16 0.27 0.75 1.13 1.75 3.09
53 48 75 142 239 355 541 48 85 208 363 581 1006 48 84 243 402 652 1218
63 65 67 69 71 73 59 62 64 68 72 75 56 57 62 65 70 74
0.39 0.55 0.96 1.42 2.10 3.01 0.21 0.36 0.74 1.19 1.80 2.92 0.15 0.25 0.57 0.91 1.39 2.41
60 46 65 115 179 275 400 46 78 172 300 487 837 45 78 189 334 548 1017
56 55 58 60 62 63 51 51 56 60 64 68 48 49 53 58 62 66
*) The ratios 13 and 26 are only available for gearboxes with free input
shaft (type 52.104/105/106/113)
46 Lenze
Worm gearboxes
Drive selection
Selection table
P1 = Input power
M2 = Output torque
= Efficiency
n1 = Input speed
i = Ratio of the gearbox
n1 700 1/min 500 1/min 150 1/min

Size 04 05 06 08 10 12 04 05 06 08 10 12 04 05 06 08 10 12
P1 [kW]
i M2 [Nm]
[%]
1.13 1.93 3.15 4.91 7.89 15.06 0.82 1.67 2.73 4.30 6.95 13.34 0.25 0.52 1.13 2.19 4.32 7.08
5 67 115 189 310 504 942 66 138 228 376 618 1163 63 138 298 610 1234 2000
90 90 91 93 94 95 87 90 90 92 93 94 82 86 86 88 90 92
0.91 1.46 2.38 3.76 6.02 11.24 0.66 1.27 2.08 3.29 5.32 9.97 0.21 0.42 0.90 1.75 3.35 5.10
7 77 127 209 346 564 1035 77 152 251 421 692 1279 74 158 339 700 1387 2100
86 88 89 90 92 93 84 86 87 89 91 93 76 82 82 84 87 89
0.57 1.26 2.03 3.20 5.11 9.34 0.41 0.95 1.77 2.80 4.51 8.26 0.13 0.30 0.58 1.17 2.23 3.98
10 66 140 234 386 628 1168 65 145 281 468 768 1437 62 142 285 605 1194 2200
84 86 87 88 90 92 83 84 85 88 89 91 76 78 79 81 84 87
0.23 0.37 1.40 2.52 4.41 8.02 0.17 0.27 1.01 1.81 3.24 5.81 0.05 0.08 0.31 0.56 1.00 1.79
13 *) 33 55 205 393 692 1285 32 54 203 389 704 1291 31 51 192 370 676 1248
80 82 84 86 88 90 77 79 83 85 88 90 72 72 76 78 82 84
0.54 0.88 1.41 2.22 3.52 6.48 0.41 0.74 1.25 1.97 3.13 5.78 0.14 0.25 0.46 0.99 1.88 2.98
15 83 138 226 379 617 1130 85 158 273 461 758 1396 83 160 300 700 1400 2250
78 79 81 83 86 88 75 77 79 82 84 87 66 69 71 74 78 82
0.40 0.73 1.23 1.91 3.04 5.48 0.30 0.58 1.06 1.69 2.70 4.88 0.10 0.20 0.36 0.72 1.35 2.25
20 83 145 255 420 691 1285 82 156 300 510 847 1582 82 155 302 647 1283 2250
76 77 78 81 83 86 72 74 76 79 82 85 65 65 68 71 75 79
0.17 0.29 1.01 1.64 2.63 4.76 0.13 0.21 0.75 1.20 2.34 4.22 0.04 0.07 0.25 0.41 0.76 1.35
26 *) 43 74 262 459 755 1414 42 73 262 460 923 1729 41 69 252 456 896 1679
69 70 75 77 81 84 67 68 72 76 79 83 59 61 62 66 71 75
0.33 0.54 0.86 1.32 1.88 3.71 0.25 0.45 0.77 1.18 1.69 3.33 0.09 0.16 0.34 0.61 1.12 1.74
30 84 141 232 390 563 1161 85 158 280 475 691 1436 85 160 350 700 1328 2250
64 66 68 72 73 79 61 63 66 70 71 78 51 54 56 60 62 70
0.26 0.45 0.76 1.16 1.81 3.19 0.19 0.37 0.65 1.04 1.62 2.87 0.07 0.13 0.24 0.47 0.85 1.35
40 85 144 262 430 711 1319 84 159 300 523 871 1625 85 159 300 658 1310 2250
60 62 65 68 72 76 58 59 62 66 70 74 49 49 50 55 61 65
0.13 0.21 0.64 1.01 1.60 2.82 0.09 0.15 0.48 0.75 1.44 2.54 0.03 0.06 0.18 0.27 0.53 0.95
53 48 84 267 466 775 1455 47 83 266 466 948 1787 50 85 270 469 980 1909
54 55 60 64 68 73 51 53 57 61 66 71 43 45 47 51 56 61
0.12 0.20 0.45 0.84 1.28 2.21 0.09 0.15 0.34 0.67 1.16 2.01 0.03 0.06 0.13 0.26 0.46 0.82
60 45 78 189 394 653 1218 45 78 188 422 800 1501 46 78 190 429 849 1709
46 46 50 55 60 65 43 44 47 53 58 63 35 34 37 42 47 53
*) The ratios 13 and 26 are only available for gearboxes with free input
shaft (type 52.104/105/106/113)
Lenze 47
Worm gearboxes
Drive selection
Dimensions
52.104
Input and output shaft can also be supplied

52.105
Input and output shaft can also be supplied

52.106
Input shaft can also be supplied

Dimensions for gearbox feet, torque plate or output cover

with centring see under options on page 38.
48 Lenze
Worm gearboxes
Drive selection
Dimensions
52.113
Input shaft can also be supplied

b 2) d1 d3
1
Size a a13) a2 a3 a4 a5 b2 c1 d21) d4 d5 d6 e1 f1 g1
j7 k6 H7
04 040 120/140 085 20 105 039 080/095 053 08 14 19 20 35 M 06 M 06 100/115 3.0/3.0 076
05 050 140/160 104 25 129 052 095/110 066 10 19 24 25 45 M 06 M 08 115/130 3.0/3.5 088
06 063 160/200 124 35 159 062 110/130 082 12 19 28 30 55 M 06 M 10 130/165 3.5/3.5 105
08 080 200/250 148 40 188 074 130/180 099 14 24 38 40 65 M 08 M 12 165/215 3.5/4.0 130
10 100 250/300 176 50 226 088 180/230 120 16 28 48 50 75 M 10 M 16 215/265 4.0/4.0 138
12 125 300/350 224 59 283 112 230/250 150 20 38 55 70 90 M 12 M 20 265/300 4.0/5.0 174
m
Size g2 i1 i2 k k1 l1 l2 l3 p1 p2 q1 q2 q3 s s1 t1 [kg]
52.104 52.105 52.106 52.113
04 049 050 29 172 107 40 050 087 35 051 100 50 122 M 06 06.6/09 10 05.2 06.5 06 06.5
05 059 060 39 198 125 50 060 104 40 062 120 60 149 M 08 09.0/09 13 09.5 12.0 09 12.0
06 067 070 40 228 140 50 070 122 50 075 140 70 172 M 10 09.0/11 13 16.0 20.0 16 20.0
08 082 080 54 268 165 60 080 148 55 090 165 85 207 M 10 11.0/14 19 28.0 34.0 27 34.0
10 087 100 59 308 190 70 100 154 65 110 190 90 234 M 12 14.0/14 18 39.0 48.0 42 48.0
12 105 110 68 385 239 90 110 187 72 141 218 107.5 272 M 16 14.0/18 23 75.0 82.0 80 82.0
1) ISO tolerance up to Ø 50 mm = k6
ISO tolerance over Ø 50 mm = m6
2) ISO tolerance h7 for b1 over 230 mm
Keys to DIN 6885/1

Dimensions in [mm]
Lenze 49
Worm gearboxes
Drive selection
Dimensions
52.107/108/109/114 52.307/308/309/314
52.407/408/409/414 52.507/508/509/514
Size Motor a1 a2 b1 b2 c1 c2 d
H8 H8
63 – 90 – 60 – 7 11 H7
04 63 140 – 95 – 19 – 11 H7
71 160 105/140 110 170/195 19 7/9 14 H7
80 200 120/160 130 180/110 12 7/9 19 H7
05 71 160 105/140 110 170/195 19 7/9 14 H7

80 200 120/160 130 180/110 12 7/9 19 H7
06 80 200 140/160 130 195/110 15 10/14 19 E7

90 200 140/160 130 195/110 15 10/14 24 E7
80 200 160 130 110 15 14 19 E7
08 90 200 160 130 110 15 14 24 E7
100/112 250 160/200 180 110/130 18 14/15 28 E7
10 90 200 – 130 – 15 – 24 E7
100/112 250 – 180 – 18 – 28 E7
12 100/112 250 – 180 – 18 – 28 E7

132 300 – 230 – 18 – 38 E7
Size Motor e1 e2 f1 f2 k l s1 s2
63 – 75 – 3 114 25 – 5,5
04 63 115 – 4 – 119 30 9 –
71 130 185/115 4 4 119 30 M 18 7/9
80 165 100/130 4 4 129 40 M 10 7/9
05 71 130 185/115 4 4 125 30 M 18 7/9

80 165 100/130 4 4 135 40 M 10 7/9
06 80 165 115/130 4 4 120 40 M 10 9

90 165 115/130 4 4 120 50 M 10 9
80 165 130 4 4 146 40 M 10 9
08 90 165 130 4 4 146 50 M 10 9
100/112 215 130/165 5 4 146 60 M 12 9
10 90 165 – 4 – 153 50 M 10 –
100/112 215 – 5 – 163 60 M 12 –
12 100/112 215 – 5 – 195 60 M 12 –

132 265 – 5 – 203 80 M 12 –
For other dimensions see “Worm-geared motors”
Dimensions in [mm]
50 Lenze
Compact units
Product information Drive selection

Illustrations ______________________________________ 52 Selection tables _________________________________ 61
Type code _______________________________________ 53 Dimensions _____________________________________ 64
Options for belt variable speed drives
Speed-adjustment units
– Angular control _______________________________ 68
Technical data – Electrical remote control _______________________ 68
Mounting positions ______________________________ 54 Speed-measuring units

Swivel positions _________________________________ 56 – DC signal generator ___________________________ 70
Terminal box positions ___________________________ 56 – Pulse generator _______________________________ 70
Position of adjustment units ______________________ 57 – Handwheel indicator __________________________ 70
General data of belt variable speed drives ________ 58 – Analog display ________________________________ 70
– Digital display ________________________________ 70
Options for gearboxes (see chapter geared motors) _ 38

Selection
Selection
– Determination of the rated point __________________ 59
– Determination of the operating factor k ____________ 60
– Determination of the effective forces ______________ 60
Lenze 51
Compact units
Product information
Illustrations
11.435 11.445
52 Lenze
Compact units
Product information
Type code
Type
Compact unit size
Gearbox size
Motor code
11.435.20.10.2
Type
11.435 Compact unit in U-configuration
11.445 Compact unit in Z-configuration
Compact unit size

10, 13, 16, 20, 25
Gearbox size
Worm gearboxes 04, 05, 06, 08, 10, 12
Motor code
Compact unit size
Motor code 10 13 16 20 25 31 40
IEC motor frame size, mounting, flange diameter
71 71 80 90 100/112 132 180

1 B14 / 160
B14 / 105 B5 / 160 B14 / 160 B5 / 250 B5 / 300 B5 / 350
80 90 100 132 160 M 200
2 B14 / 160
B14 / 160 B14 / 160 B5 / 300 B5 / 350 B5 / 400
90 100 112 160 160 L 225
3 B14 / 160
B14 / 160 B14 / 160 B5 / 300* B5 / 350 B5 / 450
180
4
B5 / 350
* special flange
Order information
– Complete type code
– Ratio
– Motor power and voltage
– Mounting positions and position of the terminal box
– Flange design : output flange diameter
– Hollow shaft design : hollow shaft bore
– Compact unit options
– Gearbox options
– Motor options
Lenze 53
Compact units
Technical data
Mountings
Foot-mounted design
B3.L B6.O B7.U B8.R
B3.O B6.R B7.L B8.U
B3.R B6.U B7.O B8.L
Flange-mounted design
V5.L V5.R V6.L V6.R
B5.L B5.O B5.R B5.U
V1.L V1.R V3.L V3.R
54 Lenze
Compact units
Technical data
Mountings
Hollow shaft design
BH.R BH.U BH.L BH.O
VH.L VH.R
Flange hollow shaft design
B5H.R B5H.U B5H.L B5H.O
V1H.L V1H.R
The mounting denominations are also valid for

Z-configuration.
The motor is mounted opposite to the gearbox.
Lenze 55
Compact units
Technical data
Swivel positions
Terminal box positions
U-mounting Z-mounting
Swivel positions and terminal box positions are fixed with

view from the motor fan side.
If no indications of the position of terminal box and swivel
position are given, swivel position 0 and terminal box
position 1 are supplied.
For swivel position 4 without indication of terminal box
position, terminal box position 2 is supplied.
Example:
V1.L.2 terminal box pos. 3
swivel position
mounting
56 Lenze
Compact units
Technical data
Position of adjustment units
Position „O“
Position „O“
(Standard)
Position „L“ Position „R“

Position „L“ Position „R“
Position „N“
(Standard)
Angular control Electrical remote control
Note The control position does not depend on the overall mounting.
For U-configuration with speed-measuring units,

the position N is not possible. Position O is here standard.
For Z-configuration, the position N is not possible.
Position R is here standard.
Lenze 57
Compact units
Technical data
General data of belt variable speed drives

Features Mechanical efficiency
– Hub: coated, polygon profile 0.79 < = < = 0.85 (at rated torque), depending on the
– Variable speed pulleys: self-centering, prestress by output speed
helical or saucer springs
– Belts: V-belts in “sandwich design”
Material
– Housing: aluminium diecast or cast iron according
to size
– Variable speed pulleys: aluminium diecast
– Hubs: St52-3K, polyamide coated
– Belts: composite material, conductive to ISO 1813
Data specific for belt variable speed drives
Compact unit P2perm n2 min..n2 max Setting V-belt J m

Size (n2 min..n2 max) (n1 = 1400/min) range WxH
[kW] [1/min] [mm x mm] [10-3 kgm2] [kg]
10 0.2..0.35 600-3320 5.8 14 x 05 0.25 0.46
13 0.5..1.30 620-3285 5.5 22 x 06 2.00 1.40
16 1.1..2.60 580-3540 6.3 28 x 08 3.20 2.20
20 1.7..4.70 565-3675 6.7 37 x 10 7.10 3.40
25 3.5..9.40 570-3725 6.7 47 x 13 20.000 6.60
58 Lenze
Compact units
Selection of dimensions
Determination of the rated point (P1, M2, n2)
The rated point results from the maximum drive power

required by the whole speed-torque profile. The rated point
is at n2max when the torque requirement
– is constant
– corresponds to the torque characteristic of the compact
unit (see fig.).
Rated point n2max (50 Hz)

Features:
Large speed setting range < = 6...7
For short time up to double (maximum) torque at n2min
(Caution: Corresponds to many times the rated torque!)
Good self ventilation of the motor because of constant
motor speed at mains frequency.
Technical notes:
– Variable speed drives are designed for operation with
low switching frequency. For high switching frequencies
please contact the manufacturer.
– The torque values M2 (at n2min) indicated in the selection
tables can be considerably exceeded under operation
with wrong selection.
Torque characteristic
(under ideal operating conditions)
M2
M 2max
Bemessungspunkt
M 2min
Rated point
n 2min n 2max Abtriebsdrehzahl n2

Output speed n2
Lenze 59
Compact units
Selection of dimensions
Determination of the operating factor k

Requirements:
– M2 ≥ MN · k
(M2 from selection tables)
1. Determining load class from type of input load:
Load class Type of load and intensity

regular operation,
I virtually shock-free
II irregular operation, moderate shocks
irregular operation, strong shocks
III and/or changing load
2. Determination of the ambient temperature
3. Read operating factor k from chart
Operating time/day
Betriebsdauer/Tag Operating time/day
24 h 16 h 8h
III
1.8 1.7 1.6
1.5
1.6
1.7
II
1.4
1.5
Operating factor k
factor k
1.6
1.3
Betriebsfaktor k
1.4
1.2
I
1.5
Operating
1.3
1.1
1.4
1.2 I
1.0
Betriebsdauer <3h/Tag
1.3 Operating time <3h/day
1.1 0.9
1.2 1.0 0.8

20 25 30 35 40 °C
AmbientUmgebungstemperatur
temperature Tamb TU
Ambient temperature Tamb
Determination of the effective forces

Requirements:
– Frperm ≥ Fr
(Frperm from General data gearbox)
1. Determining the radial force:

– The acting radial forces depend on the application.
– For transmission elements 2000 · M2 · fz
Fr =
from table: dW
fz Transmission element
1.12 toothed gears
1.25 ... 1.4 chain wheels
1.5 crown gears
1.5 ... 2.0 small V-belt pulleys depending

on initial tension
2. Determining the axial force

– The effective axial forces depend on the application.
60 Lenze
Compact units
Drive selection
Selection table
Type
n2 M2
P1 [1/min] [Nm] Ç = 3 = U-Configuration IEC-motor i Figure Page
Ç = 4 = Z-Configuration No.
0.25 kW 621 – 124

414 – 183
12.7 – 114
13.9 – 120
11.4.Ç 5.10.04.1
11.4.Ç 5.10.04.1
71 – 4
71 – 4
15
17
120/134
120/134
64/66
64/66
300 – 160 15.4 – 126 11.4.Ç 5.10.04.1 71 – 4 10 120/134 64/66
231 – 146 16.5 – 124 11.4.Ç 5.10.04.1 71 – 4 13 120/134 64/66
207 – 141 17.2 – 134 11.4.Ç 5.10.04.1 71 – 4 15 120/134 64/66
150 – 130 19.7 – 140 11.4.Ç 5.10.04.1 71 – 4 20 120/134 64/66
115 – 123 13.7 – 128 11.4.Ç 5.10.04.1 71 – 4 26 120/134 64/66
103 – 121 13.7 – 153 11.4.Ç 5.10.04.1 71 – 4 30 120/134 64/66
175 – 115 16.7 – 137 11.4.Ç 5.10.04.1 71 – 4 40 120/134 64/66
158 – 112 17.7 – 124 11.4.Ç 5.10.04.1 71 – 4 53 120/134 64/66
.1148 – 119.7 18.7 – 123 11.4.Ç 5.10.04.1 71 – 4 60 120/134 64/66
0.37 kW 621 – 124

414 – 183
14.0 – 114
15.8 – 120
11.4.Ç 5.10.04.1
11.4.Ç 5.10.04.1
71 – 4
71 – 4
15
17
120/134
120/134
64/66
64/66
300 – 160 17.9 – 126 11.4.Ç 5.10.04.1 71 – 4 10 120/134 64/66
231 – 146 19.7 – 124 11.4.Ç 5.10.04.1 71 – 4 13 120/134 64/66
207 – 141 11.2 – 134 11.4.Ç 5.10.04.1 71 – 4 15 120/134 64/66
150 – 130 14.7 – 140 11.4.Ç 5.10.04.1 71 – 4 20 120/134 64/66
115 – 123 17.7 – 128 11.4.Ç 5.10.04.1 71 – 4 26 120/134 64/66
103 – 121 18.7 – 153 11.4.Ç 5.10.04.1 71 – 4 30 120/134 64/66
175 – 115 23.7 – 137 11.4.Ç 5.10.04.1 71 – 4 40 120/134 64/66
158 – 112 24.7 – 124 11.4.Ç 5.10.04.1 71 – 4 53 120/134 64/66
.1148 – 119.7 23.7 – 123 11.4.Ç 5.10.04.1 71 – 4 60 120/134 64/66
0.55 kW 621 – 128

414 – 186
16.0 – 130
18.7 – 143
11.4.Ç 5.13.05.2
11.4.Ç 5.13.05.2
80 – 4
80 – 4
15
17
121/135
121/135
64/66
64/66
316 – 165 11.2 – 155 11.4.Ç 5.13.05.2 80 – 4 10 121/135 64/66
226 – 147 15.7 – 141 11.4.Ç 5.13.05.2 80 – 4 13 121/135 64/66
207 – 143 16.7 – 176 11.4.Ç 5.13.05.2 80 – 4 15 121/135 64/66
158 – 133 20.7 – 195 11.4.Ç 5.13.05.2 80 – 4 20 121/135 64/66
113 – 123 26.7 – 153 11.4.Ç 5.13.05.2 80 – 4 26 121/135 64/66
103 – 121 27.7 – 107 11.4.Ç 5.13.05.2 80 – 4 30 121/135 64/66
179 – 116 34.7 – 199 11.4.Ç 5.13.05.2 80 – 4 40 121/135 64/66
157 – 112 41.7 – 154 11.4.Ç 5.13.05.2 80 – 4 53 121/135 64/66
148 – 110 43.7 – 162 11.4.Ç 5.13.05.2 80 – 4 60 121/135 64/66
0.75 kW 621 – 128

414 – 186
18.1 – 133
12.2 – 148
11.4.Ç 5.13.05.2
11.4.Ç 5.13.05.2
80 – 4
80 – 4
15
17
121/135
121/135
64/66
64/66
316 – 165 15.7 – 162 11.4.Ç 5.13.05.2 80 – 4 10 121/135 64/66
226 – 147 20.7 – 141 11.4.Ç 5.13.05.2 80 – 4 13 121/135 64/66
207 – 143 22.7 – 185 11.4.Ç 5.13.05.2 80 – 4 15 121/135 64/66
158 – 133 28.7 – 106 11.4.Ç 5.13.05.2 80 – 4 20 121/135 64/66
113 – 123 36.7 – 153 11.4.Ç 5.13.05.2 80 – 4 26 121/135 64/66
103 – 121 37.7 – 107 11.4.Ç 5.13.05.2 80 – 4 30 121/135 64/66
179 – 116 46.7 – 199 11.4.Ç 5.13.05.2 80 – 4 40 121/135 64/66
157 – 112 50.7 – 154 11.4.Ç 5.13.05.2 80 – 4 53 121/135 64/66
148 – 110 59.7 – 162 11.4.Ç 5.13.05.2 80 – 4 60 121/135 64/66
.1137 – 117.6 65.7 – 188 11.4.Ç 5.13.06.2 80 – 4 80 123/137 64/66
1.1 kW 621 – 128

414 – 186
12.2 – 133
18.7 – 148
11.4.Ç 5.13.05.3
11.4.Ç 5.13.05.3
90 – 4
90 – 4
15
17
122/136
122/136
64/66
64/66
316 – 165 23.7 – 162 11.4.Ç 5.13.05.3 90 – 4 10 122/136 64/66
226 – 147 30.7 – 141 11.4.Ç 5.13.05.3 90 – 4 13 122/136 64/66
207 – 143 32.7 – 185 11.4.Ç 5.13.05.3 90 – 4 15 122/136 64/66
158 – 133 41.7 – 105 11.4.Ç 5.13.05.3 90 – 4 20 122/136 64/66
113 – 123 52.7 – 152 11.4.Ç 5.13.05.3 90 – 4 26 122/136 64/66
103 – 121 54.7 – 107 11.4.Ç 5.13.05.3 90 – 4 30 122/136 64/66
167 – 199 46.7 – 199 11.4.Ç 5.13.05.3 90 – 4 40 122/136 64/66
159 – 112 87.7 – 176 11.4.Ç 5.13.06.3 90 – 4 53 124/138 64/66
149 – 110 88.7 – 147 11.4.Ç 5.13.06.3 90 – 4 60 124/138 64/66
Lenze 61
Compact units
Drive selection
Selection table
Type
n2 M2
P1 [1/min] [Nm] Ç = 3 = U-Configuration IEC-motor i Figure Page
Ç = 4 = Z-Configuration No.
1.5 kW 621 – 128

414 – 186
116 – 133
124 – 148
11.4.Ç 5.13.05.3
11.4.Ç 5.13.05.3
90 – 4
90 – 4
15
17
122/136
122/136
64/66
64/66
316 – 165 131 – 162 11.4.Ç 5.13.05.3 90 – 4 10 122/136 64/66
226 – 147 141 – 141 11.4.Ç 5.13.05.3 90 – 4 13 122/136 64/66
207 – 143 144 – 185 11.4.Ç 5.13.05.3 90 – 4 15 122/136 64/66
158 – 133 156 – 106 11.4.Ç 5.13.05.3 90 – 4 20 122/136 64/66
118 – 124 173 – 142 11.4.Ç 5.13.05.3 90 – 4 26 122/136 64/66
103 – 121 170 – 107 11.4.Ç 5.13.05.3 90 – 4 30 122/136 64/66
259 – 112 119 – 176 11.4.Ç 5.13.06.3 90 – 4 53 124/138 64/66
249 – 110 115 – 147 11.4.Ç 5.13.06.3 90 – 4 60 124/138 64/66
1.237 – 117.1 156 – 195 11.4.Ç 5.16.08.2 90 – 4 80 127/141 64/66
2.2 kW 621 – 120

414 – 180
126 – 179
138 – 114
11.4.Ç 5.16.06.3
11.4.Ç 5.16.06.3
100 – 4
100 – 4
15
17
126/140
126/140
64/66
64/66
308 – 160 150 – 151 11.4.Ç 5.16.06.3 100 – 4 10 126/140 64/66
235 – 146 165 – 158 11.4.Ç 5.16.06.3 100 – 4 13 126/140 64/66
207 – 140 170 – 188 11.4.Ç 5.16.06.3 100 – 4 15 126/140 64/66
154 – 130 192 – 226 11.4.Ç 5.16.06.3 100 – 4 20 126/140 64/66
118 – 123 116 – 188 11.4.Ç 5.16.06.3 100 – 4 26 126/140 64/66
103 – 120 109 – 184 11.4.Ç 5.16.06.3 100 – 4 30 126/140 64/66
175 – 115 156 – 381 11.4.Ç 5.16.08.3 100 – 4 40 128/142 64/66
157 – 111 197 – 404 11.4.Ç 5.16.08.3 100 – 4 53 128/142 64/66
.1149 – 119.4 179 – 314 11.4.Ç 5.16.08.3 100 – 4 60 128/142 64/66
3.0 kW 621 – 120

414 – 180
135 – 179
152 – 114
11.4.Ç 5.16.06.3
11.4.Ç 5.16.06.3
100 – 4
100 – 4
15
17
126/140
126/140
64/66
64/66
308 – 160 169 – 151 11.4.Ç 5.16.06.3 100 – 4 10 126/140 64/66
235 – 146 188 – 158 11.4.Ç 5.16.06.3 100 – 4 13 126/140 64/66
207 – 140 195 – 188 11.4.Ç 5.16.06.3 100 – 4 15 126/140 64/66
154 – 130 125 – 226 11.4.Ç 5.16.06.3 100 – 4 20 126/140 64/66
118 – 123 152 – 188 11.4.Ç 5.16.06.3 100 – 4 26 126/140 64/66
100 – 120 168 – 336 11.4.Ç 5.16.08.3 100 – 4 30 128/142 64/66
175 – 115 207 – 381 11.4.Ç 5.16.08.3 100 – 4 40 128/142 64/66
4.0 kW 600 – 113

400 – 175
149 – 131
172 – 191
11.4.Ç 5.20.10.3
11.4.Ç 5.20.10.3
112 – 4
112 – 4
15
17
130/144
130/144
64/66
64/66
300 – 157 194 – 251 11.4.Ç 5.20.10.3 112 – 4 10 130/144 64/66
231 – 144 121 – 319 11.4.Ç 5.20.10.3 112 – 4 13 130/144 64/66
200 – 138 132 – 348 11.4.Ç 5.20.10.3 112 – 4 15 130/144 64/66
150 – 128 172 – 453 11.4.Ç 5.20.10.3 112 – 4 20 130/144 64/66
115 – 122 217 – 568 11.4.Ç 5.20.10.3 112 – 4 26 130/144 64/66
100 – 119 224 – 564 11.4.Ç 5.20.10.3 112 – 4 30 130/144 64/66
175 – 114 288 – 660 11.4.Ç 5.20.10.3 112 – 4 40 130/144 64/66
158 – 111 352 – 713 11.4.Ç 5.20.10.3 112 – 4 53 130/144 64/66
5.5 kW 600 – 113

400 – 175
167 – 131
198 – 191
11.4.Ç 5.20.10.3
11.4.Ç 5.20.10.3
112 – 4
112 – 4
15
17
130/144
130/144
64/66
64/66
300 – 157 130 – 251 11.4.Ç 5.20.10.3 112 – 4 10 130/144 64/66
231 – 144 166 – 319 11.4.Ç 5.20.10.3 112 – 4 13 130/144 64/66
200 – 138 181 – 348 11.4.Ç 5.20.10.3 112 – 4 15 130/144 64/66
150 – 128 237 – 453 11.4.Ç 5.20.10.3 112 – 4 20 130/144 64/66
115 – 122 299 – 568 11.4.Ç 5.20.10.3 112 – 4 26 130/144 64/66
100 – 119 278 – 564 11.4.Ç 5.20.10.3 112 – 4 30 130/144 64/66
158 – 111 486 – 952 11.4.Ç 5.20.12.3 112 – 4 53 131/145 64/66
62 Lenze
Compact units
Drive selection
Selection table
n2 M2
P1 [1/min] [Nm] Type IEC-motor i Figure Page
No.
7.5 kW 621 – 118

414 – 179
189 – 1262
130 – 1382
11.435.25.12.2
11.435.25.12.2
132 – 4
132 – 4
15
17
132
132
64
64
300 – 157 177 – 1519 11.435.25.12.2 132 – 4 10 132 64
231 – 144 227 – 1663 11.435.25.12.2 132 – 4 13 132 64
207 – 140 239 – 1702 11.435.25.12.2 132 – 4 15 132 64
150 – 129 322 – 1943 11.435.25.12.2 132 – 4 20 132 64
115 – 122 409 – 1194 11.435.25.12.2 132 – 4 26 132 64
103 – 120 396 – 1919 11.435.25.12.2 132 – 4 30 132 64
9.2 kW 621 – 118

414 – 179
109 – 1262
159 – 1382
11.435.25.12.2
11.435.25.12.2
132 – 4
132 – 4
15
17
132
132
64
64
300 – 157 217 – 1519 11.435.25.12.2 132 – 4 10 132 64
231 – 144 278 – 1663 11.435.25.12.2 132 – 4 13 132 64
207 – 140 293 – 1702 11.435.25.12.2 132 – 4 15 132 64
150 – 129 395 – 1943 11.435.25.12.2 132 – 4 20 132 64
115 – 122 502 – 1194 11.435.25.12.2 132 – 4 26 132 64
11 kW 621 – 118
414 – 179
130 – 1262
190 – 1382
11.435.25.12.3
11.435.25.12.3
160 – 4
160 – 4
15
17
133
133
64
64
300 – 157 259 – 1519 11.435.25.12.3 160 – 4 10 133 64
231 – 144 333 – 1663 11.435.25.12.3 160 – 4 13 133 64
207 – 140 351 – 1702 11.435.25.12.3 160 – 4 15 133 64
150 – 129 473 – 1943 11.435.25.12.3 160 – 4 20 133 64
115 – 122 588 – 1194 11.435.25.12.3 160 – 4 26 133 64
Lenze 63
Compact units
Drive selection
Dimensions U-configuration
Foot-mounted design
Hollow shaft design
64 Lenze
Compact units
Drive selection
Dimensions U-configuration
Dimensions
Fig. No. Type Motor Belt Basic dimensions m1)

[kg]
g g21) g3 h h1 h2 h3 h4 h5 h6 h7 k k1 k2 m n p p1 q w x y1)
120 11.435.10.04.1 171 13/475 135 142 43 67 136 172 71 107 169 151 191 208 165 165 21 35 145 128 122 170 100 212 118
121 11.435.13.05.2 180 156 234 130
50 83 83 133 182 162 112 254 173 27 44 174 153 149
122 11.435.13.05.3 190 178 276 141
22/610 180 173 223 195 170 108
123 11.435.13.06.2 180 156 234 137
59 100 100 163 197 175 138 284 188 32 48 215 190 172
124 11.435.13.06.3 190 178 276 148
125 11.435.16.06.2 190 178 276 152
59 100 100 163 197 175 138 299 188 32 48 215 190 172
126 11.435.16.06.3 100 198 308 160
28/750 212 217 272 110 105 147
127 11.435.16.08.2 190 178 276 166
71 121 121 201 114 191 171 340 103 32 58 258 228 207
128 11.435.16.08.3 100 198 308 174
129 11.435.20.10.2 100 198 308 103
75 150 150 250 138 110 210 391 118 40 63 315 275 234
130 11.435.20.10.3 112 37/900 263 222 248 321 130 105 147 333 114
131 11.435.20.12.3 112 222 93 186 186 311 167 141 266 445 146 48 67 385 340 272 333 140
132 11.435.25.12.2 132 262 405 183
47/1120 320 93 186 316 402 186 311 167 141 266 476 160 146 48 67 385 340 272 160 184
133 11.435.25.12.3 160 317 501 223
Type Foot Flange Shaft Hollow shaft

a b c e f i m n s a1 b13) c1 c2 e1 f1 i1 i2 s1 s2 d2) l d2 d1H7 l1
120 180 100 16.6
11.435.10.04.1 198 118 11 122 140 151 21 35 10 18 5 3.0 150 29 10.5 19 150 M16 20 100
140 195 115 19.0
140 195 115 3.0
11.435.13.05.Ç 114 152 14 146 180 163 27 44 10 10 6 160 39 19.0 12.5 24 160 M18 25 120
160 110 130 3.5
160 110 130 19.0
11.435.13.06.Ç 136 174 17 175 205 172 32 48 12 12 6 3.5 170 40 16.5 28 170 M10 30 140
200 130 165 11.0
160 110 130 19.0
11.435.16.06.Ç 136 174 17 175 205 172 32 48 12 12 6 3.5 170 40 16.5 28 170 M10 30 140
200 130 165 11.0
200 130 165 3.5 11.0
11.435.16.08.Ç 166 212 19 200 245 182 32 58 14 14 6 180 54 16.5 38 180 M12 40 170
250 180 215 4.0 14.0
250 180 215
11.435.20.10.Ç 194 240 22 234 280 193 40 63 18 16 6 4.0 100 59 14.0 20.5 48 100 M16 50 180
300 230 265
300 230 265 4.0 14.0
11.435.20.12.3 235 300 25 286 350 101 48 67 22 20 6 110 68 20.5 55 110 M20 70 215
350 250 300 5.0 18.0
300 230 265 4.0 14.0
11.435.25.12.Ç 235 300 25 286 350 101 48 67 22 20 6 110 68 20.5 55 110 M20 70 215
350 250 300 5.0 18.0
1) Deviations in motor dimensions possible.
2) ISO tolerance up to Ø 050 mm = k6; more than Ø 050 mm = m6
3) ISO tolerance up to Ø 230 mm = j7; more than Ø 230 mm = h7
Keys to DIN 6885/1
Dimensions in [mm]
Lenze 65
Compact units
Drive selection
Dimensions Z-configuration
Foot-mounted design
Hollow shaft design
66 Lenze
Compact units
Drive selection
Dimensions Z-configuration
Dimensions
Fig. No. Type Motor Belt Basic dimensions m1)

[kg]
g g21) g3 h h1 h2 h3 h4 h5 h6 h7 k k1 k2 m n p p1 q w x y1)
134 11.445.10.04.1 171 13/475 135 142 43 67 136 172 71 107 169 151 191 208 165 165 21 35 145 128 122 170 100 212 118
135 11.445.13.05.2 180 156 234 130
50 83 83 133 182 162 112 254 173 27 44 174 153 149
136 11.445.13.05.3 190 178 276 141
22/610 180 173 223 195 170 108
137 11.445.13.06.2 180 156 234 137
59 100 100 163 197 175 138 284 188 32 48 215 190 172
138 11.445.13.06.3 190 178 276 148
139 11.445.16.06.2 190 178 276 152
59 100 100 163 197 175 138 299 188 32 48 215 190 172
140 11.445.16.06.3 100 198 308 160
28/750 212 217 272 110 105 147
141 11.445.16.08.2 190 178 276 166
71 121 121 201 114 191 171 340 103 32 58 258 228 207
142 11.445.16.08.3 100 198 308 174
143 11.445.20.10.2 100 198 308 103
75 150 150 250 138 110 210 391 118 40 63 315 275 234
144 11.445.20.10.3 112 37/900 263 222 248 321 130 105 147 333 114
145 11.445.20.12.3 112 222 93 186 186 311 167 141 266 445 146 48 67 385 340 272 333 140
Type Foot Flange Shaft Hollow shaft

a b c e f i m n s a1 b13) c1 c2 e1 f1 i1 i2 s1 s2 d2) l d2 d1H7 l1
120 180 100 16.6
11.445.10.04.1 198 118 11 122 140 151 21 35 10 18 5 3.0 150 29 10.5 19 150 M16 20 100
140 195 115 19.0
140 195 115 3.0
11.445.13.05.Ç 114 152 14 146 180 163 27 44 10 10 6 160 39 19.0 12.5 24 160 M18 25 120
160 110 130 3.5
160 110 130 19.0
11.445.13.06.Ç 136 174 17 175 205 172 32 48 12 12 6 3.5 170 40 16.5 28 170 M10 30 140
200 130 165 11.0
160 110 130 19.0
11.445.16.06.Ç 136 174 17 175 205 172 32 48 12 12 6 3.5 170 40 16.5 28 170 M10 30 140
200 130 165 11.0
200 130 165 3.5 11.0
11.445.16.08.Ç 166 212 19 200 245 182 32 58 14 14 6 180 54 16.5 38 180 M12 40 170
250 180 215 4.0 14.0
250 180 215
11.445.20.10.Ç 194 240 22 234 280 193 40 63 18 16 6 4.0 100 59 14.0 20.5 48 100 M16 50 180
300 230 265
300 230 265 4.0 14.0
11.445.20.12.3 235 300 25 286 350 101 48 67 22 20 6 110 68 20.5 55 110 M20 70 215
350 250 300 5.0 18.0
1) Deviations in motor dimensions possible.
2) ISO tolerance up to Ø 050 mm = k6; more than Ø 050 mm = m6
3) ISO tolerance up to Ø 230 mm = j7; more than Ø 230 mm = h7
Keys to DIN 6885/1
Dimensions in [mm]
Lenze 67
Compact units
Drive selection
Options – Speed-adjustment unit

Name Front adjustment Angle adjustment Electric remote adjustment
(Standard) (Option) (Option)
Schematic sketch
Installation Hand wheel Hand wheel Servo motor

– impact resistant plastic – impact resistant plastic – three-phase AC
– drive size 25: Aluminium – asynchronous motor
– for techn. data see below
Location – parallel axial to axis – rectangular to axis – rectangular to axis
– of variable speed pulley – of variable speed pulley – of variable speed pulley
Position indication – in the housing of the – in the housing of the –
– adjustment unit – adjustment unit
Position indication Option Option –
in hand wheel – for scaling see below – for scaling see below
Controls: Type code
Type
Size
Type of control
11.430.16.931
Size: 10, 13, 16, 25, 40
Type of control:
931 – Front control
932 – Angular control
933 – Electrical remote control, enclosure IP54
Techn. data: servo motor (for electric remote adjustm.)
Drive P1 n1 Voltage/ Enclosure Thermal Ratio Adjust.

size frequency class small gearbox time
[kW] [1/min] [s]
10 0.012 1350 ∆ 220-240V / 50 Hz IP 54 F 60 approx. 15
13 Y 380-415V / 50 Hz approx. 22
16 0.060 1350 ∆ 220-240V / 50 Hz IP 54 F 55 approx. 26
20 Y 380-415V / 50 Hz approx. 35
25 0.060 1350 ∆ 220-240V / 50 Hz IP 54 F 50 approx. 40
Y 380-415V / 50 Hz approx. 50
68 Lenze
Compact units
Drive selection
Options – Speed-adjustment units
Angular control
Compact Unit/ Type Angular control Weight

Size d2 h2 l1 l2 m [kg]
10 11.430.10.932 070 087 88 105 0.5
13 11.430.13.932 070 104 56 087 0.5
16 11.430.16.932
16 11.430.16.932 105 155 58 103 1.5
25 11.430.25.932 105 179 88 138 4.0
Electrical remote control
Compact Unit/ Type Electrical remote control Weight

Size a g g1 h i k l m [kg]
10 11.430.10.933 25 65 123 54 31 165 081 2.5
13 11.430.13.933 25 65 123 60 31 165 082 3.0
16 11.430.16.933
20 11.430.20.933 31 85 144 71 37 199 111 5.5
25 11.430.25.933 35 85 144 95 41 203 148 8.0

Dimensions in [mm]
Lenze 69
Compact units
Drive selection
Options – Speed-measuring unit

Name DC speed encoder Pulse encoder
Schematic sketch
Installation – Speed encoder at output shaft – Speed encoder at output shaft

of variable speed drives of variable speed drives
(Input shaft of reduction gearboxes) (Input shaft of reduction gearboxes)
– Cable length: 1 m – Cable length: 2.5 m (max. cable lenght: 300 m)
Regulations see motors DIN 19234 / NAMUR
Input voltage – 8.2 V ± 0.5 V
(Generator) (Ri = 1kOhm ± 50 Ohm)
Important: Lenze-Indicators
export supply voltage!
Signal voltage Analog Digital
n2 min: approx. 3 V 4 pulse/revolution
n2 max: approx. 20 V > 1.2 V
(for R -> endless)
Speed indicators Analog display
– suitable for – rear-side encoder input
control-cabinet – scaling in (V), adjustable
installation
Digital display – rear-side generator output/input

– 4-digit display
– adjustable display
70 Lenze
Compact units
Drive selection
Options – Speed measuring units

DC speed encoder type 11.330.Ç Ç .931
Dimensions in [mm]
Pulse encoder type FGL 4/1.5 - 5K
Compact unit/ Pulse encoder

Size x
10 approx. 34
13 approx. 32
16 approx. 33
20 approx. 19
25
Dimensions in [mm]
Lenze 71
Compact units
Drive selection
Options – Speed-measuring units
Hand wheel with position indicator
Hand wheel size Hand wheel with position indicator

Front adjustment Angle adjustment d d2 l
HA 08 HA 08 070 52 43
HA 10 HA 10 105 87 55
HA 15 160 87 55
Position indicator in hand wheel: scaling
Compact unit 10 13 16 20 25
size
Scaling 1. .12 1. .12 1. .18 1. .18 1. . 24
Analog display type DQW 96 RS Digital display type ELTA 2000 A
Dimensions in [mm]
72 Lenze
DISCO-variable speed drive
Product information Drive selection

Illustrations ______________________________________ 74 Selection tables _________________________________ 82
Type code _______________________________________ 75 Dimensions _____________________________________ 84
Options for DISCO-variable speed drives
Speed-adjustment units
– Spindle housing _______________________________ 92
Technical data – Bevel gear adjuster ____________________________ 92
– Electrical remote control _______________________ 92
Mounting positions ______________________________ 76
Spindle housing position _________________________ 76 Speed-measuring units
Terminal box positions ___________________________ 76 – Inductive speed measurement __________________ 94
General data ____________________________________ 78 – Hand wheel indicator __________________________ 94
– Analog display ________________________________ 94
– Digital display ________________________________ 94
Selection Options for gearboxes (see chapter geared motors) _ 38
Selection
– Determination of the rated point __________________ 80
– Determination of the operating factor ______________ 81
– Determination of the effective forces ______________ 81
Lenze 73
Product information
Illustrations
11.705 11.715
74 Lenze
Product information
Type code
Type
Disco size
Output design
Variant
11.715.02.04.1
Type Order information

11.715 Disco with motor – Complete type code
11.705 Disco with free input shaft – Ratio
– Motor power and voltage
Disco size – Mounting positions and position of the
02 . . . 18 – terminal box
– Flange design: Output flange diameter
Output design – Hollow shaft design: hollow shaft bore
04 . . . 12 = size of the gearbox – Speed-adjustment and position
– Disco options
Variant – Gearbox options
no code = normal – Motor options
1 = without motor
2 = without gearbox
3 = without motor, without gearbox
Necessary motor dimensions
Disco size 02 03 04 05 06 07 08/18

IEC-motor frame size 71 71 80 90 100 112 132
Motor design/Flange diameter IM B14/C105 IM B14/C105 IM B5/A200 IM B51/A200 IM B5/A250 IM B5/A250 IM B5/A300
Motorshaft d x l (mm) 14 x 30 14 x 30 19 x 40 24 x 50 28 x 60 28 x 60 38 x 80
All motors must have oil seals in the flange.
Lenze 75
Technical data
Mountings
Foot-mounted design
B3.L B3.O B8.L
B3.R B8.U B8.R
B6.O B7.O
B6.R
B7.L
B6.U B7.U
V5.L V6.L Attention: By changing the position

of the adjuster to another position
than shown, the position of the motor
terminal box is changed accordingly.
V5.R V6.R
Hollow shaft mounted design
BH.L BH.O VH.L
BH.R VH.R
BH.U
76 Lenze
Technical data
Mountings
Foot-mounted design
Attention: By changing the position
B5.L B5.O
of the adjuster device to another
position than shown, the position of
the motor terminal box is changed
accordingly.
B5.R B5.U
V1.L V1.R
V3.L V3.R
Hollow shaft / flange mounted design
B5H.L B5H.O V1H.L
B5H.R V1H.R
B5H.U
Spindle housing position

V3H.L V3H.R
Terminal box position
Mounting example
Basic design
Spindle housing position
V3.L.2.2 Terminal box position
Lenze 77
Technical data
General data
Designs Lubricants
– Input shaft – DISCO-life lubrication oil for ambient temperatures
Tolerance k6, 0 ºC < = Tu < = 40 ºC
with key to DIN 6885, sheet 1 – Filling quantities
– Shaft seals Factory set according to mounting position
double lip seals for filling quantities see “Operating Instructions”
Materials
– Housing: aluminium diecast or cast iron according to size
– Input shaft: tempered steel C 45
– Friction parts: roller bearing steel 100 Cr6, hardened
– Shaft seals: NBR/FP
Mechanical efficiency
Efficiency at 100 % load at n1 = 1430 1/min
Output speed n2 in 1/min
78 Lenze
Technical data of DISCO
General data
DISCO-specific data
Size n1*) = 3000 n1 = 1500 n1 = 1000 n1 = 750
P1*) 0.37 0.25 0.18 0.12

02 n2 1860 – 310 930 – 155 600 – 100 450 – 75
M2 1.6 – 3.2 2–4 2–4 2–4
P1 0.55 0.37 0.37 0.25 0.18
03 n2 1920 – 335 1920 – 335 950 – 165 630 – 110 460 – 80
M2 2.2 – 4.4 1.5 – 4.4 3–6 3–6 3–6
P1 1.1 0.75 0.75 0.55 0.55 0.37 0.37 0.25
04 n2 1920 – 335 1920 – 335 950 – 165 950 – 165 630 – 110 630 – 110 460 – 80 460 – 80
M2 4.5 – 9 3–9 6 – 12 4.5 – 12 6 – 12 4.5 – 12 6 – 12 4.5 – 12
P1 2.2 1.5 1.5 1.1 1.1 0.75 0.75 0.55
05 n2 1920 – 335 1920 – 335 950 – 165 950 – 165 630 – 110 630 – 110 460 – 80 460 – 80
M2 9 – 18 6 – 18 12 – 24 9 – 24 12 – 24 9 – 24 12 – 24 9 – 24
P1 3 2.2 2.2 1.5 1.5 1.1
06 n2 1000 – 175 1000 – 175 660 – 115 660 – 115 490 – 85 490 – 85
M2 22 – 44 17.5 – 44 22 – 44 17.5 – 44 22 – 44 17.5 – 44
P1 4 3 2.2
07 n2 1000 – 175 660 – 115 490 – 85
M2 32 – 64 32 – 64 32 – 64
P1 7.5 5.5 5.5 4 4 3
08/18 n2 1000 – 200 1000 – 200 660 – 130 660 – 130 490 – 100 490 – 100
M2 58 – 116 45 – 90 58 – 116 45 – 90 58 – 116 45 – 90
*) P1 = input power in kW
n1 = input speed in 1/min
n2 = output speed in 1/min
M2 = output torque in Nm
Maximum input speed n1
Size 02 03 04 05 06 07 08/18
n1 max. (1/min) 3600 3600 3600 *1800* 1800 1800 1800

3600
* free input shaft
Permissible radial and axial forces
Size FA1 FR1

N N
02 1300 1300
03 1450 1450
04 1700 1700
05 1000 1000
06/07 1500 1500
18/08 1800 1800
Lenze 79
Selection
Determination of the rated point (P1, M2, n2)

The rated point results from the maximum drive power Technical notes:
required by the whole speed-torque profile. The rated point – DISCO-variable speed drives are designed for operation
is at n2max when the torque requirement with low switching frequency. For high switching frequen-
– is constant cies please contact the manufacturer.
– corresponds to the torque characteristic of the DISCO- – The torque values M2 (at n2min) indicated in the selection
variable speed drive (see fig.). tables can be considerably exceeded under operation
with wrong selection.
Rated point n2max (50 Hz)

Features:
Large speed setting range < = 5...6
Good self ventilation of the motor because of constant
motor speed at mains frequency.
Torque characteristic
(under ideal operating conditions)
M2
M 2max
Bemessungspunkt
M 2min
Rated point
n 2min n 2max Abtriebsdrehzahl n2

Output speed n2
80 Lenze
Selection of dimension
Determination of the operating factor k

Requirements:
– M2 ≥ MN · k
(M2 from selection tables)
1. Determining the load class from type of input load:
Load class Type of load and intensity

regular operation,
I virtually shock-free
II irregular operation, moderate shocks
irregular operation, strong shocks
III and/or changing load
2. Determination of the ambient temperature
3. Read operating factor k from chart
Operating time / day

24 h 16 h 8 h
III
1.9 1.8 1.7
1.7 1.6
1.8
1.5
1.6
1.7
1.4
1.5
Operating factor k
1.6 II
1.3
1.4
1.5 1.2
1.3
1.1
1.4
1.2
1.0
1.3 1.1 I
0.9
1.2 1.0 0.8

20 25 30 35 40
Ambient temperature T amb
Determination of the effective forces

Requirements:
– Frperm ≥ Fr
(Frperm from General data gearbox)
1. Determining the radial force:

– The acting radial forces depend on the application.
– For transmission elements 2000 · M2 · fz
from table: Fr =
d W
fz Transmission element
1.12 toothed gears
1.25 ... 1.4 chain wheels
1.5 crown gears
1.5 ... 2.0 small V-belt pulleys depending

on initial tension
2. Determining the axial force

– The effective axial forces depend on the application.
Lenze 81
Drive selection
Selection table
n2 M2 n1 Type Dimensions
P1 i 0 = free input shaft Page
[1/min] [Nm] [1/min]
1 = direct mounted motor
0.25 kW 192 – 132.0

128 – 121.0
119,9 – 116
112,9 – 123
1380
1380
15
17
11.7Ç 5.02.04
11.7Ç 5.02.04
116,9 – 131 1380 84
193 – 115.0 10 11.7Ç 5.02.04
171 – 111.0 120,9 – 125 1380 13 11.7Ç 5.02.04
164 – 110.0 122,9 – 138 1380 15 11.7Ç 5.02.04
146 – 117.8 129,9 – 145 1380 20 11.7Ç 5.02.04
137,9 – 159 1380 84
135 – 115.8 26 11.7Ç 5.02.05
132 – 115.3 136,9 – 161 1380 30 11.7Ç 5.02.05
124 – 114.1 145,9 – 175 1380 40 11.7Ç 5.02.05
117 – 112.9 153,9 – 166 1380 53 11.7Ç 5.02.05 84
115 – 112.5 155,9 – 164 1380 60 11.7Ç 5.02.05
0.37 kW 385 – 164.0

256 – 142.0
117,9 – 113
110,9 – 118
2840
2840
15
17
11.7Ç 5.02.04
11.7Ç 5.02.04
113,9 – 125 2840 84
186 – 131.0 10 11.7Ç 5.02.04
143 – 123.0 117,9 – 124 2840 13 11.7Ç 5.02.04
128 – 121.0 118,9 – 132 2840 15 11.7Ç 5.02.04
193 – 115.0 124,9 – 140 2840 20 11.7Ç 5.02.04
130,9 – 153 2840 84
170 – 111.0 26 11.7Ç 5.02.05
164 – 110.0 131,9 – 152 2840 30 11.7Ç 5.02.05
148 – 118.2 138,9 – 164 2840 40 11.7Ç 5.02.05
135 – 115.8 147,9 – 157 2840 53 11.7Ç 5.02.05 84
130 – 115.0 148,9 – 159 2840 60 11.7Ç 5.02.05
0.55 kW 397 – 169.0

264 – 146.0
117,9 – 118
114,9 – 126
2840
2840
15
17
11.7Ç 5.03.04
11.7Ç 5.03.04
119,9 – 135 2840 84
192 – 133.0 10 11.7Ç 5.03.04
144 – 125.0 124,9 – 140 2840 13 11.7Ç 5.03.05
132 – 123.0 126,9 – 146 2840 15 11.7Ç 5.03.05
101 – 117.0 133,9 – 158 2840 20 11.7Ç 5.03.05
142,9 – 152 2840 84
172 – 112.0 26 11.7Ç 5.03.05
166 – 111.0 143,9 – 173 2840 30 11.7Ç 5.03.05
149 – 118.6 157,9 – 197 2840 40 11.7Ç 5.03.06
137 – 116.6 170,9 – 116 2840 53 11.7Ç 5.03.06 84
131 – 115.5 173,9 – 114 2840 60 11.7Ç 5.03.06
0.75 kW 397 – 169.0

264 – 146.0
115,9 – 138
122,9 – 155
2810
2810
15
17
11.7Ç 5.04.05
11.7Ç 5.04.05
126,9 – 149 1380 84
196 – 134.0 15 11.7Ç 5.04.05
131 – 122.0 137,9 – 170 1380 17 11.7Ç 5.04.05
100 – 117.0 148,9 – 190 1380 10 11.7Ç 5.04.05
174 – 112.0 164,9 – 120 1380 13 11.7Ç 5.04.06
169,9 – 124 84
165 – 111.0 1380 15 11.7Ç 5.04.06
148 – 118.5 190,9 – 162 1380 20 11.7Ç 5.04.06
137 – 116.5 114,9 – 188 1380 26 11.7Ç 5.04.06
132 – 115.7 114,9 – 192 1380 30 11.7Ç 5.04.06
195,9 – 328 84
117 – 113.1 1380 53 11.7Ç 5.04.08
115 – 112.7 192,9 – 304 1380 60 11.7Ç 5.04.08
1.1 kW 397 – 169.0

264 – 146.0
120,9 – 137
129,9 – 154
2810
2810
15
17
11.7Ç 5.04.05
11.7Ç 5.04.05
137,9 – 146 84
202 – 135.0 2810 10 11.7Ç 5.04.05
150 – 126.0 150,9 – 193 2810 13 11.7Ç 5.04.06
132 – 123.0 154,9 – 197 2810 15 11.7Ç 5.04.06
198 – 117.0 171,9 – 127 2810 20 11.7Ç 5.04.06
189,9 – 159 84
175 – 113.0 2810 26 11.7Ç 5.04.06
166 – 111.0 192,9 – 154 2810 30 11.7Ç 5.04.06
149 – 118.6 117,9 – 198 2810 40 11.7Ç 5.04.06
136 – 116.3 155,9 – 264 2810 53 11.7Ç 5.04.08 84
131 – 115.4 154,9 – 251 2810 60 11.7Ç 5.04.08
82 Lenze
Drive selection
Selection table
n2 M2 n1 Type Dimensions
P1 i = free input shaft Page
[1/min] [Nm] [1/min]
= direct mounted motor
1.5 kW 397 – 169.0
264 – 146.0
1127 – 1176
1139 – 1111
2800
2800
15
17
11.7Ç 5.05.06
11.7Ç 5.05.06
1152 – 1199 1420 84
196 – 134.0 15 11.7Ç 5.05.06
131 – 122.0 1176 – 1143 1420 17 11.7Ç 5.05.06
197 – 116.0 1101 – 1189 1420 10 11.7Ç 5.05.06
171 – 112.0 1136 – 1254 1420 13 11.7Ç 5.05.08
1147 – 1264 1420 84
163 – 111.0 15 11.7Ç 5.05.08
147 – 118.3 1190 – 1340 1420 20 11.7Ç 5.05.08
135 – 116.2 1244 – 1395 1420 26 11.7Ç 5.05.08
131 – 115.5 1248 – 1417 1420 30 11.7Ç 5.05.08
123 – 114.1 1311 – 1524 1420 40 11.7Ç 5.05.08 84
118 – 113.2 1397 – 1669 1420 53 11.7Ç 5.05.10
115 – 112.7 1409 – 1649 1420 60 11.7Ç 5.05.10
2.2 kW** 397 – 169.0

264 – 146.0
1140 – 1176
1159 – 1110
2800
2800
15
17
11.7Ç 5.05.06
11.7Ç 5.05.06
1178 – 1146 2800 84
196 – 134.0 10 11.7Ç 5.05.06
144 – 125.0 1105 – 1196 2800 13 11.7Ç 5.05.08
128 – 122.0 1113 – 1207 2800 15 11.7Ç 5.05.08
196 – 116.0 1147 – 1267 2800 20 11.7Ç 5.05.08
1190 – 1341 2800 84
172 – 112.0 26 11.7Ç 5.05.08
164 – 111.0 1195 – 1335 2800 30 11.7Ç 5.05.08
148 – 118.4 1247 – 1421 2800 40 11.7Ç 5.05.08
137 – 116.5 1313 – 1540 2800 53 11.7Ç 5.05.10 84
130 – 115.4 1320 – 1534 2800 60 11.7Ç 5.05.10
3.0 kW 200 – 135.0

133 – 123.0
1101 – 1191
1148 – 1276
1400
1400
15
17
11.7Ç 5.06.08
11.7Ç 5.06.08
1194 – 1361 1400 84
100 – 117.0 10 11.7Ç 5.06.08
175 – 113.0 1251 – 1292 1400 13 11.7Ç 5.06.08
166 – 111.0 1271 – 1486 1400 15 11.7Ç 5.06.08
150 – 118.8 1359 – 1646 1400 20 11.7Ç 5.06.10
1450 – 1681 1400 84
138 – 116.7 26 11.7Ç 5.06.10
133 – 115.8 1473 – 1793 1400 30 11.7Ç 5.06.10
125 – 114.4 1553 – 1018 1400 40 11.7Ç 5.06.10
119 – 113.4 1766 – 1300 1400 53 11.7Ç 5.06.12 84
116 – 112.8 1800 – 1240 1400 60 11.7Ç 5.06.12
4.0 kW 200 – 135.0

133 – 123.0
1149 – 1281
1218 – 1406
1430
1430
15
17
11.7Ç 5.07.10
11.7Ç 5.07.10
1286 – 1535 1430 84
100 – 117.0 10 11.7Ç 5.07.10
176 – 113.0 1364 – 1527 1430 13 11.7Ç 5.07.10
166 – 111.0 1402 – 1720 1430 15 11.7Ç 5.07.10
150 – 118.8 1522 – 1940 1430 20 11.7Ç 5.07.10
1672 – 1207 84
138 – 116.7 1430 26 11.7Ç 5.07.12
134 – 116.0 1686 – 1151 1430 30 11.7Ç 5.07.12
125 – 114.4 1903– 1527 1430 40 11.7Ç 5.07.12 84
119 – 113.4 1025 – 1478 1430 53 11.7Ç 5.07.12
5.5 kW 207 – 136.0

138 – 124.0
1203 – 1408
1300 – 1599
1450
1450
15
17
11.7Ç 5.18.12
11.7Ç 5.18.12
100 – 117.5 1409 – 1818 1450 10 11.7Ç 5.18.12 84
169 – 112.0 1557 – 1115 1450 15 11.7Ç 5.18.12
150 – 118.8 1755 – 1510 1450 20 11.7Ç 5.18.12
7.5 kW 207 – 136.0

138 – 124.0
1262 – 1495
1385 – 1717
1450
1450
15
17
11.7Ç 5.08.12
11.7Ç 5.08.12
100 – 117.5 1525 – 1975 1450 10 11.7Ç 5.08.12 84
169 – 112.0 1717 – 1275 1450 15 11.7Ç 5.08.12
150 – 118.8 1965 – 1720 1450 20 11.7Ç 5.08.12
** not permissible for type 11.705
with free input shaft at n1 = 2800 1/min.
Lenze 83
Drive selection
Dimensions
Type 11.715 Foot-mounted design
Type 11.715 Flange-mounted design
84 Lenze
Drive selection
Dimensions
Type 11.715
Typ a a13) a3 b b14) c c1 d e e1 e3 f f1 f2 g1) h h2 h4 i2 k

j7
11.715.02.04 198 120/140 198 118 180/195 11 18 19 122 100/115 122 140 3 150 145 167 165 171 150 221
11.715.02.05 114 140/160 114 152 195/110 14 10 24 146 115/130 146 180 3/3.5 183 183 160 245
11.715.03.04 198 120/140 198 188 180/195 11 18 19 122 100/115 122 140 3 167 171 150 251
11.715.03.05 114 140/160 114 152 195/110 14 10 24 146 115/130 146 180 3/3.5 175 145 183 183 183 160 261
11.715.03.06 136 160/200 136 174 110/130 17 12 28 175 130/165 175 205 3.5 100 100 170 289
11.715.04.05 114 140/160 114 152 195/110 14 10 24 146 115/130 146 180 3/3.5 183 183 160 280
11.715.04.06 136 160/200 136 174 110/130 17 12 28 175 130/165 175 205 3.5 215 160 100 198 100 170 308
11.715.04.08 166 200/250 166 212 130/180 19 14 38 200 165/215 200 245 3.5/4 121 121 180 351
11.715.05.06 136 160/200 136 174 110/130 17 12 28 175 130/165 175 205 3.5 100 100 170 330
11.715.05.08 166 200/250 166 212 130/180 19 14 38 200 165/215 200 245 3.5/4 253 180 121 122 121 180 373
11.715.05.10 194 250/300 194 240 180/230 22 16 48 234 215/265 234 280 4 150 150 100 409
11.715.06.08 166 200/250 166 212 130/180 19 14 38 200 165/215 200 245 3.5 121 121 180 387
11.715.06.10 194 250/300 194 240 180/230 22 16 48 234 215/265 234 280 4 305 200 150 145 150 100 429
11.715.06.12 235 300/350 235 300 230/250 25 20 55 286 265/300 286 350 4/5 186 186 110 506
11.715.07.10 194 250/300 194 240 180/230 22 16 48 234 215/265 234 280 4 305 225 150 145 150 100 429
11.715.07.12 235 300/350 235 300 230/250 25 20 55 286 265/300 286 350 4/5 186 186 110 506
11.715.08.12 235 300/350 235 300 230/250 25 20 55 286 265/300 286 350 4/5 379 265 186 176 186 110 522
11.715.18.12 235 300/350 235 300 230/250 25 20 55 286 265/300 286 350 4/5 186 186 110 522
Type k2 k3 l m n o p p1 p2 q q2 q3 s s1 v v1 v2 w x x1 m1)
y1) [kg]
11.715.02.04 121 165 150 21 35 149 145 128 38 142 122 100 10 6.6/9 183 140 14 170 105 143 215 120
11.715.02.05 136 173 160 27 44 159 175 153 41 149 120 10 9 150 123
11.715.03.04 121 165 150 21 35 149 145 128 38 122 100 10 6.6/9 140 128
11.715.03.05 136 173 160 27 44 159 175 153 41 150 149 120 10 9 186 150 14 170 105 143 215 132
11.715.03.06 166 188 170 32 48 167 215 190 52 172 140 12 9/11 163 140
11.715.04.05 136 173 160 27 44 159 175 153 41 149 120 10 9 150 143
11.715.04.06 166 188 170 32 48 167 215 190 52 158 172 140 12 9/11 103 163 17 105 152 163 235 151
11.715.04.08 195 103 180 32 58 182 258 228 57 207 165 14 11/14 180 165
11.715.05.06 166 188 170 32 48 167 215 190 52 172 140 12 9/11 163 171
11.715.05.08 195 103 180 32 58 182 258 228 57 174 207 165 14 11/14 123 180 17 105 152 163 285 185
11.715.05.10 224 118 100 40 63 187 315 275 65 234 190 18 14 100 107
11.715.06.08 195 103 180 32 58 182 258 228 57 207 165 14 11/14 180 118
11.715.06.10 224 118 100 40 63 187 315 275 65 182 234 190 18 14 149 100 17 105 152 163 320 140
11.715.06.12 277 146 110 48 67 105 385 340 74 272 218 22 14/18 125 174
11.715.07.10 224 118 100 40 63 187 315 275 65 182 234 190 18 14 100 150
11.715.07.12 277 146 110 48 67 105 385 340 74 272 218 22 14/18 149 125 17 105 152 163 340 186
11.715.08.12 277 146 110 48 67 105 385 340 74 104 272 218 22 14/18 190 125 26 160 1952) 111 415 251
11.715.18.12 277 146 110 48 67 105 385 340 74 272 218 22 14/18 125 251
2) Add. hand lever 80 mm
4) ISO-tolerance h7 for b1 over 230 mm
Shafts : ISO-tolerance up to Ø 50 mm = k6
ISO-tolerance over Ø 50 mm = m6
Keys to DIN 6885/1
Tapped shaft ends to DIN 332-DR
Dimensions in [mm]
Lenze 85
Drive selection
Dimensions
Type 11.715 Hollow shaft-mounted design
Type 11.715 Flange-hollow shaft-mounted design
Hollow shaft
86 Lenze
Drive selection
Dimensions
Type 11.715
Typ a13) b14) c1 c2 d2 e1 f1 f2 g1) g3 h2 h5 i3 k

j7 H7
11.715.02.04 120/140 180/195 18 5 20 100/115 3 150 145 43 165 169 29.0 221
11.715.02.05 140/160 195/110 10 6 25 115/130 3/3.5 50 182 38.5 245
11.715.03.04 120/140 180/195 18 5 20 100/115 3 43 169 29.0 251
11.715.03.05 140/160 195/110 10 6 25 115/130 3/3.5 175 145 50 183 182 38.5 261
11.715.03.06 160/200 110/130 12 6 30 130/165 3.5 59 197 39.5 289
11.715.04.05 140/160 195/110 10 6 25 115/130 3/3.5 50 182 38.5 280
11.715.04.06 160/200 110/130 12 6 30 130/165 3.5 215 160 59 198 197 39.5 308
11.715.04.08 200/250 130/180 14 6 40 165/215 3.5/4 71 114 53.5 351
11.715.05.06 160/200 110/130 12 6 30 130/165 3.5 59 197 39.5 330
11.715.05.08 200/250 130/180 14 6 40 165/215 3.5/4 253 180 71 122 114 53.5 373
11.715.05.10 250/300 180/230 16 6 50 215/265 4 75 138 58.5 409
11.715.06.08 200/250 130/180 14 6 40 165/215 3.5 71 114 53.5 387
11.715.06.10 250/300 180/230 16 6 50 215/265 4 305 200 75 145 138 58.5 429
11.715.06.12 300/350 230/250 20 6 70 265/300 4/5 93 167 67.5 506
11.715.07.10 250/300 180/230 16 6 50 215/265 4 305 225 75 145 138 58.5 429
11.715.07.12 300/350 230/250 20 6 70 265/300 4/5 93 167 67.5 506
11.715.08.12 300/350 230/250 20 6 70 265/300 4/5 379 265 93 176 167 67.5 522
11.715.18.12 300/350 230/250 20 6 70 265/300 4/5 93 167 67.5 522
Type k2 k3 l2 o1 p1 p2 q q4 s1 s2 t1 v v1 v2 w x x1 y1) m1)

[kg]
11.715.02.04 121 165 100 150 128 38 142 179 6.6/9 10.5 187 183 140 14 170 105 143 215 120
11.715.02.05 136 173 120 160 153 41 199 9 12.5 104 150 123
11.715.03.04 121 165 100 150 128 38 179 6.6/9 10.5 187 140 128
11.715.03.05 136 173 120 160 153 41 150 199 9 12.5 104 186 150 14 170 105 143 215 132
11.715.03.06 166 188 140 170 190 52 110 9/11 16.5 122 163 140
11.715.04.05 136 173 120 160 153 41 199 9 12.5 104 150 143
11.715.04.06 166 188 140 170 190 52 158 110 9/11 16.5 122 103 163 17 105 152 163 235 151
11.715.04.08 195 103 170 185 228 57 139 11/14 16.5 148 180 165
11.715.05.06 166 188 140 170 190 52 110 9/11 16.5 122 163 171
11.715.05.08 195 103 170 185 228 57 174 139 11/14 16.5 148 123 180 17 105 152 163 285 185
11.715.05.10 224 118 180 190 275 65 149 14 20.5 154 100 107
11.715.06.08 195 103 170 185 228 57 139 11/14 16.5 148 180 118
11.715.06.10 224 118 180 190 275 65 182 149 14 20.5 154 149 100 17 105 152 163 320 140
11.715.06.12 277 146 215 108 340 74 175 14/18 20.5 187 125 174
11.715.07.10 224 118 180 190 275 65 182 149 14 20.5 154 100 105 152 163 340 150
11.715.07.12 277 146 215 108 340 74 175 14/18 20.5 187 149 125 17 186
11.715.08.12 277 146 215 108 340 74 104 175 14/18 20.5 187 125 160 1955) 111 415 251
11.715.18.12 277 146 215 108 340 74 175 14/18 20.5 187 190 125 26 251
Keys to DIN 6885/1

Dimensions in [mm]
Lenze 87
Drive selection
Dimensions
Type 11.705 Foot-mounted design
Type 11.705 Flange-mounted design
88 Lenze
Drive selection
Dimensions
Type 11.705
Type a a13) a3 b b14) c c1 d d1 e e1 e3 f f1 f2 h h2 h4 i2 k1

j7
11.705.02.04 198 120/140 198 118 180/195 11 18 19 11 122 100/115 122 140 3 150 167 165 171 150 273
11.705.02.05 114 140/160 114 152 195/110 14 10 24 146 115/130 146 180 3/3.5 184 183 160 297
11.705.03.04 198 120/140 198 188 180/195 11 18 19 122 100/115 122 140 3 167 171 150 312
11.705.03.05 114 140/160 114 152 195/110 14 10 24 14 146 115/130 146 180 3/3.5 175 186 183 183 160 322
11.705.03.06 136 160/200 136 174 110/130 17 12 28 175 130/165 175 205 3/5 100 100 170 350
11.705.04.05 114 140/160 114 152 195/110 14 10 24 146 115/130 146 180 3/3.5 186 183 160 333
11.705.04.06 136 160/200 136 174 110/130 17 12 28 15 175 130/165 175 205 3.5 215 100 198 100 170 361
11.705.04.08 166 200/250 166 212 130/180 19 14 38 200 165/215 200 245 3.5/4 121 121 180 404
11.705.05.06 136 160/200 136 174 110/130 17 12 28 175 130/165 175 205 3.5 100 100 170 403
11.705.05.08 166 200/250 166 212 130/180 19 14 38 20 200 165/215 200 245 3.5/4 253 121 122 121 180 446
11.705.05.10 194 250/300 194 240 180/230 22 16 48 234 215/265 234 280 4 150 150 100 483
11.705.06.08 166 200/250 166 212 130/180 19 14 38 200 165/215 200 245 3.5/4 121 121 180 490
11.705.06.10 194 250/300 194 240 180/230 22 16 48 25 234 215/265 234 280 4 305 150 145 150 100 532
11.705.06.12 235 300/350 235 300 230/250 25 20 55 286 265/300 286 350 4/5 186 186 110 609
11.705.07.10 194 250/300 194 240 180/230 22 16 48 25 234 215/265 234 280 4 305 150 145 150 100 532
11.705.07.12 235 300/350 235 300 230/250 25 20 55 286 265/300 286 350 4/5 186 186 110 609
11.705.08.12 235 300/350 235 300 230/250 25 20 55 25 286 265/300 286 350 4/5 379 186 176 186 110 674
11.705.18.12 235 300/350 235 300 230/250 25 20 55 286 265/300 286 350 4/5 186 186 110 674
Type k2 k3 l l1 m n o p p1 p2 q1 q2 q3 s s1 v v1 v2 w x x1 m
[kg]
11.705.02.04 121 165 150 23 21 35 149 145 128 38 194 122 100 10 6.6/9 183 140 14 170 105 143 112
11.705.02.05 136 173 160 27 44 159 175 153 41 149 120 10 9 150 116
11.705.03.04 121 165 150 21 35 149 145 128 38 122 100 10 6.6/9 140 121
11.705.03.05 136 173 160 30 27 44 159 175 153 41 112 149 120 10 9 186 150 14 170 105 143 125
11.705.03.06 166 188 170 32 48 167 215 190 52 172 140 12 9/11 163 133
11.705.04.05 136 173 160 27 44 159 175 153 41 149 120 10 9 150 133
11.705.04.06 166 188 170 30 32 48 167 215 190 52 112 172 140 12 9/11 103 163 17 105 152 163 141
11.705.04.08 195 103 180 32 58 182 258 228 57 207 165 14 11/14 180 155
11.705.05.06 166 188 170 32 48 167 215 190 52 172 140 12 9/11 163 155
11.705.05.08 195 103 180 40 32 58 182 258 228 57 147 207 165 14 11/14 123 180 17 105 152 163 169
11.705.05.10 224 118 100 40 63 187 315 275 65 234 190 18 14 100 191
11.705.06.08 195 103 180 32 58 182 258 228 57 207 165 14 11/14 180 192
11.705.06.10 224 118 100 50 40 63 187 315 275 65 186 234 190 18 14 149 100 17 105 152 163 114
11.705.06.12 277 146 110 48 67 105 385 340 74 272 218 22 14/18 125 150
11.705.07.10 224 118 100 50 40 63 187 315 275 65 186 234 190 18 14 149 100 17 105 152 163 114
11.705.07.12 277 146 110 48 67 105 385 340 74 272 218 22 14/18 125 150
11.705.08.12 277 146 110 50 48 67 105 385 340 74 256 272 218 22 14/18 190 125 26 160 1952) 111 202
11.705.18.12 277 146 110 48 67 105 385 340 74 272 218 22 14/18 125 202
Shafts : ISO-tolerance up to Ø 50 mm = k6
ISO-tolerance over Ø 50 mm = m6
Keys to DIN 6885/1
Dimensions in [mm]
Lenze 89
Drive selection
Dimensions
Type 11.705 Hollow shaft-mounted design
Type 11.705 Flange-hollow shaft-mounted design
Hohlwelle
Hollow shaft
90 Lenze
Drive selection
Dimensions
Type 11.705
Type a13) b14) c1 c2 d1 d2 e1 f1 f2 g3 h2 h5 i3 k1

j7 H7
11.705.02.04 120/140 180/195 18 5 11 20 100/115 3 150 43 165 169 29.0 273
11.705.02.05 140/160 195/110 10 6 25 115/130 3/3.5 50 182 38.5 297
11.705.03.04 120/140 180/195 18 5 20 100/115 3 43 169 29.0 312
11.705.03.05 140/160 195/110 10 6 14 25 115/130 3/3.5 175 50 183 182 38.5 322
11.705.03.06 160/200 110/130 12 6 30 130/165 3.5 59 197 39.5 350
11.705.04.05 140/160 195/110 10 6 25 115/130 3/3.5 50 182 38.5 333
11.705.04.06 160/200 110/130 12 6 15 30 130/165 3.5 215 59 198 197 39.5 361
11.705.04.08 200/250 130/180 14 6 40 165/215 3.5/4 71 114 53.5 404
11.705.05.06 160/200 110/130 12 6 30 130/165 3.5 59 197 39.5 403
11.705.05.08 200/250 130/180 14 6 20 40 165/215 3.5/4 253 71 122 114 53.5 446
11.705.05.10 250/300 180/230 16 6 50 215/265 4 75 138 58.5 483
11.705.06.08 200/250 130/180 14 6 40 165/215 3.5 71 114 53.5 490
11.705.06.10 250/300 180/230 16 6 25 50 215/265 4 305 75 145 138 58.5 532
11.705.06.12 300/350 230/250 20 6 70 265/300 4/5 93 167 67.5 609
11.705.07.10 250/300 180/230 16 6 25 50 215/265 4 305 75 145 138 58.5 532
11.705.07.12 300/350 230/250 20 6 70 265/300 4/5 93 167 67.5 609
11.705.08.12 300/350 230/250 20 6 25 70 265/300 4/5 379 93 176 167 67.5 674
11.705.18.12 300/350 230/250 20 6 70 265/300 4/5 93 167 67.5 674
Type k2 k3 l1 l2 o1 p1 p2 q1 q4 s1 s2 t1 v v1 v2 w x x1 m
[kg]
11.705.02.04 121 165 23 100 150 128 38 194 179 6.6/9 10.5 187 183 140 14 170 105 143 112
11.705.02.05 136 173 120 160 153 41 199 9 12.5 104 150 116
11.705.03.04 121 165 100 150 128 38 179 6.6/9 10.5 187 140 121
11.705.03.05 136 173 30 120 160 153 41 112 199 9 12.5 104 186 150 14 170 105 143 125
11.705.03.06 166 188 140 170 190 52 110 9/11 16.5 122 163 133
11.705.04.05 136 173 120 160 153 41 199 9 12.5 104 150 133
11.705.04.06 166 188 30 140 170 190 52 112 110 9/11 16.5 122 103 163 17 105 152 163 141
11.705.04.08 195 103 170 185 228 57 139 11/14 16.5 148 180 155
11.705.05.06 166 188 140 170 190 52 110 9/11 16.5 122 163 155
11.705.05.08 195 103 40 170 185 228 57 147 139 11/14 16.5 148 123 180 17 105 152 163 169
11.705.05.10 224 118 180 190 275 65 149 14 20.5 154 100 191
11.705.06.08 195 103 170 185 228 57 139 11/14 16.5 148 180 192
11.705.06.10 224 118 50 180 190 275 65 186 149 14 20.5 154 149 100 17 105 152 163 114
11.705.06.12 277 146 215 108 340 74 175 14/18 20.5 187 125 150
11.705.07.10 224 118 50 180 190 275 65 186 149 14 20.5 154 100 105 152 163 114
11.705.07.12 277 146 215 108 340 74 175 14/18 20.5 187 149 125 17 150
11.705.08.12 277 146 50 215 108 340 74 256 175 14/18 20.5 187 125 160 1952) 111 202
11.705.18.12 277 146 215 108 340 74 175 14/18 20.5 187 190 125 26 202
Keys to DIN 6885/1

Dimensions in [mm]
Lenze 91
Drive selection

Executions
Name Hand wheel adjuster Bevel gear adjuster Electrical adjuster

(Standard) (Option) (Option)
Installation Hand wheel Hand wheel Servo motor
– impact-resistant plastic – impact-resistant plastic – three-phase AC
asynchronous motor
– for technical data see below
Position indication – parallel axial to axis – rectangular to axis – rectangular to axis
of spindle of spindle of spindle
Position indication Option Option
in hand wheel – for scaling see below – for scaling see below
Technical data: servo motor

(for electrical remote adjuster)
Disco P1 N1 Voltage/frequency Rated Enclosure Thermal Ratio Adjustment

Size current class small gearbox time
[kW] [1/min] [V] [l] [s]
02 ∆ 220 – 240 V / 50 HZ 0.18 IP 54 F 20 110

0.012 1350 Y 380 – 415 V / 50 HZ 0.10 60 130
03 ∆ 220 – 240 V / 50 HZ 0.18 IP 54 F 20 113

0.012 1350 Y 380 – 415 V / 50 HZ 0.10 60 140
04 ∆ 220 – 240 V / 50 HZ 0.40 IP 54 F 20 115

0.060 1350 Y 380 – 415 V / 50 HZ 0.23 55 140
05 ∆ 220 – 240 V / 50 HZ 0.40 IP 54 F 20 117

0.060 1350 Y 380 – 415 V / 50 HZ 0.23 55 147
06/07 ∆ 220 – 240 V / 50 HZ 0.40 IP 54 F 20 119

0.060 1350 Y 380 – 415 V / 50 HZ 0.23 55 147
08 ∆ 220 – 240 V / 50 HZ 0.94 IP 54 F 40 150

0.180 1350 Y 380 – 415 V / 50 HZ 0.55 80 100
Output speed variations for DISCO sizes

06 . . . 18/08 with electrical adjuster
DISCO Input speed n1 [1/min]

Size 1500 1000 750
Output speed n2 [1/min]
06/07 980 – 190 645 – 125 480 – 195
18/08 965 – 220 635 – 145 475 – 110
Position indicator in hand wheel: scaling
DISCO
02 03 04/05 06/07 18/08
Size
Scaling 12 18 24 24 36
92 Lenze
Drive selection

Spindle housing
Standard design for hand wheel adjuster
Size c d2 g h k1 k2 l2 l3 v
+ 0.1 h9
02 3.2 18 64 14 174 43 12.5 17 183
03 3.2 18 64 14 174 43 12.5 17 186
04 3.2 10 86 17 114 63 16.5 11 103
05 3.2 10 86 17 114 63 16.5 11 123
06/07 3.2 10 86 17 114 63 16.5 11 149
Universal design suitable for hand wheel adjuster,

bevel gear adjuster and electrical remote adjuster
Size c d1 d2 e f g h k1 k2 l1 l2 l3 v
+ 0.1 h9 j7
02 3.0 30 38 8 13 164 16 184 46 31 14 17 186
03 3.0 30 38 8 13 164 16 184 46 31 14 17 189
04 3.0 37 10 8 13 186 19 114 66 42 18 11 107
05 3.0 37 10 8 13 186 19 114 66 42 18 11 125
06/07 3.0 37 10 8 13 186 19 114 66 42 18 11 153
18/08* 4.0 52 15 8 13 106 26 161 98 55 21 14 190
* for size 18/08 standard design
Dimensions in [mm]
Lenze 93
Drive selection

Bevel gear adjuster
Middle of Disco
Size a b c d e f g
h8
02/03 175 22 194 18 116 46 16
04/05/06/07 193 18 127 10 157 56 19
18/08 107 21 173 15 203 73 26
Dimensions in [mm]
Size Swivel range

Hand wheel Hand wheel with position indicator
02/03/04 90º 20 – 45º
05/06/07 90º 20 – 45º
18/08 70º 20 – 45º
Dimensions in [mm]
94 Lenze
Drive selection

Electrical remote adjuster
Microswitch housing
Actuator (the long lever

actuates S3)
Motor position I
Terminal box pos. 2 of main motor is not possible
Motor position II
Terminal box pos. 3 of main motor is not possible
Size f g g1 k1 k2 p q v v1
02 118 186
19 165 123 137 119 170 25
03 121 189
04 139 107
19 185 144 152 153 199 31
05 159 127
06
19 185 144 152 153 185 199 153 31
07
18/08 19 118 164 190 1)2211) 222 221 190 40
1)with slipping clutch: 243 mm
Dimensions in [mm]
Lenze 95
Drive selection

Design:
Name Electrical remote control Inductive speed measurement

with potentiometer
Installation – Potentiometer in the limit switch box – inductive pulse encoder
of the electrical remote control – in the output cover
Supply voltage – –
(Mains supply of the electrical (Generator)
remote control)
Signal voltage 10 V (DC) 12 pulses / revolution
1.0 V (AC)
Speed indicators Analog display
– suitable for – rear-side detector input
control-cabinet – scaling in (V), adjustable
installation
Digital display – rear-side generator output/input

– 4-digit display
– adjustable display
96 Lenze
Drive selection

Position indicator / Rev. direction indicator
Size Hand wheel with rev. Hand wheel with d d1 d2 l l1 l2 l3 w

direction indicator position indicator H9
02/03 HD 8 HA 8 08 20 52 43 15 10 – 070
04/05
06/07 HD 10 HA 10 10 30 85 55 23 14 – 105
18/08 HD 15 HA 15 15 25 85 55 23 15 80 160
Analog display type DQW 96 RS Digital display type ELTA 2000 A
Dimensions in [mm]
Lenze 97

05-Worm Gearboxes 52

Uploaded by

Copyright:

Available Formats

05-Worm Gearboxes 52

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

05-Worm Gearboxes 52

Uploaded by

Copyright:

Available Formats

462 887

Drives with worm

Introducing Lenze Compact units

Worm geared motors

No matter which drive solution you imagine,

According to our maxim “one stop shopping”, we offer you

Possible combinations motor-gearboxes

Combination is possible with motors in B5 and B14 design.

The motor – gearbox combination only shows the

Permissible radial forces output

x/l 0 0,2 0,4 0,6 0,8 1

Radial force Fr2 [kN]

Starting efficiency and self-locking

Starting efficiency A shocks and/or vibrations in the gearbox so that it is possible

Static self locking:

0.18 – 3.0 kW (1500 1/min) 50 Hz: 220 – 240 / 380 – 415 V 1)

(1000 1/min) 50 Hz: 220 – 240 / 380 – 415 V 1)

4.00 – 45.0 kW (1500 1/min) 50 Hz: 380 V – 415 V 2)

1) New rated voltage 230/400 V included

Motor winding 50 Hz Connection to 60 Hz Rated speed Rated power Rated torque

Operating mode Isolation class

Enclosure Motor protection

Ambient temperature Perm. power Installation height Perm. power

2 Armature 6 Fan cowl

4 Screws 8 Torque setting ring

Hand release lever

Product information Selection of worm geared motors

52.307 / 52.507 52.107 / 52.407

52.308 / 52.508 52.108 / 52.408

52.309 / 52.509 52.109 / 52.409

52.314 / 52.514 52.114 / 52.414

Internal motor designation

Motor pole numbers

Motor frame size

Gearbox size Order information

with hollow shaft

For output flange and hollow shaft the

Teminal box positions

Worm geared motors

Terminal box positions according to figure A or figure B

52.107... 52.114 52.307... 53.314

Load class of the machine

Load classes of the machine:

Running time per hour

Type Design Dimensions

0.18 kW 52.507.04.Ç – 63L/4

Type Design Dimensions

0.18 kW 52.507.04.Ç – 63L/4

0.25 kW 52.507.04.Ç – 71S/4

Type Design Dimensions

0.25 kW 52.507.04.Ç – 71S/4

Type Design Dimensions

0.25 kW 52.507.05.Ç – 71L/6

0.37 kW 52.507.04.Ç – 71L/4

Type Design Dimensions

0.37 kW 52.507.05.Ç – 71L/4

0.55 kW 52.507.04.Ç – 80S/4

Type Design Dimensions

0.55 kW 52.507.04.Ç – 80L/6

Type Design Dimensions